///////////////////////////////////////////////////////////////////////////// // Name: _splitter.i // Purpose: SWIG interface defs for wxSplitterWindow // // Author: Robin Dunn // // Created: 2-June-1998 // RCS-ID: $Id$ // Copyright: (c) 2003 by Total Control Software // Licence: wxWindows license ///////////////////////////////////////////////////////////////////////////// // Not a %module //--------------------------------------------------------------------------- MAKE_CONST_WXSTRING2(SplitterNameStr, wxT("splitter")); //--------------------------------------------------------------------------- %newgroup enum { wxSP_NOBORDER, wxSP_NOSASH, wxSP_PERMIT_UNSPLIT, wxSP_LIVE_UPDATE, wxSP_3DSASH, wxSP_3DBORDER, wxSP_NO_XP_THEME, wxSP_BORDER, wxSP_3D, }; enum wxSplitMode { wxSPLIT_HORIZONTAL = 1, wxSPLIT_VERTICAL }; enum { wxSPLIT_DRAG_NONE, wxSPLIT_DRAG_DRAGGING, wxSPLIT_DRAG_LEFT_DOWN }; //--------------------------------------------------------------------------- DocStr(wxSplitterWindow, "wx.SplitterWindow manages up to two subwindows or panes, with an optional vertical or horizontal split which can be used with the mouse or programmatically.", " Styles ------- ==================== ====================================== wx.SP_3D Draws a 3D effect border and sash. wx.SP_3DSASH Draws a 3D effect sash. wx.SP_3DBORDER Synonym for wxSP_BORDER. wx.SP_BORDER Draws a standard border. wx.SP_NOBORDER No border (default). wx.SP_NO_XP_THEME Under Windows XP, switches off the attempt to draw the splitter using Windows XP theming, so the borders and sash will take on the pre-XP look. wx.SP_PERMIT_UNSPLIT Always allow to unsplit, even with the minimum pane size other than zero. wx.SP_LIVE_UPDATE Don't draw XOR line but resize the child windows immediately. ==================== ====================================== Events ------ ============================== ======================================= EVT_SPLITTER_SASH_POS_CHANGING The sash position is in the process of being changed. May be used to modify the position of the tracking bar to properly reflect the position that would be set if the drag were to be completed at this point. EVT_SPLITTER_SASH_POS_CHANGED The sash position was changed. May be used to modify the sash position before it is set, or to prevent the change from taking place. EVT_SPLITTER_UNSPLIT The splitter has been just unsplit. EVT_SPLITTER_DCLICK The sash was double clicked. The default behaviour is to unsplit the window when this happens (unless the minimum pane size has been set to a value greater than zero.) ============================== ======================================= "); class wxSplitterWindow: public wxWindow { public: %pythonPrepend wxSplitterWindow "if kwargs.has_key('point'): kwargs['pos'] = kwargs['point'];del kwargs['point']" %pythonPrepend wxSplitterWindow() "" %pythonAppend wxSplitterWindow "self._setOORInfo(self)" %pythonAppend wxSplitterWindow() "" DocCtorStr( wxSplitterWindow(wxWindow* parent, wxWindowID id=-1, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style=wxSP_3D, const wxString& name = wxPySplitterNameStr), "Constructor. Creates and shows a SplitterWindow.", ""); DocCtorStrName( wxSplitterWindow(), "Precreate a SplitterWindow for 2-phase creation.", "", PreSplitterWindow); DocDeclStr( bool , Create(wxWindow* parent, wxWindowID id=-1, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style=wxSP_3D, const wxString& name = wxPySplitterNameStr), "Create the GUI part of the SplitterWindow for the 2-phase create.", ""); DocDeclStr( wxWindow *, GetWindow1() const, "Gets the only or left/top pane.", ""); DocDeclStr( wxWindow *, GetWindow2() const, "Gets the right/bottom pane.", ""); DocDeclStr( void , SetSplitMode(int mode), "Sets the split mode. The mode can be wx.SPLIT_VERTICAL or wx.SPLIT_HORIZONTAL. This only sets the internal variable; does not update the display.", ""); DocDeclStr( wxSplitMode , GetSplitMode() const, "Gets the split mode", ""); DocDeclStr( void , Initialize(wxWindow *window), "Initializes the splitter window to have one pane. This should be called if you wish to initially view only a single pane in the splitter window.", ""); // Associates the given window with window 2, drawing the appropriate sash // and changing the split mode. // Does nothing and returns False if the window is already split. // A sashPosition of 0 means choose a default sash position, // negative sashPosition specifies the size of right/lower pane as it's // absolute value rather than the size of left/upper pane. DocDeclStr( virtual bool , SplitVertically(wxWindow *window1, wxWindow *window2, int sashPosition = 0), "Initializes the left and right panes of the splitter window.", " :param window1: The left pane. :param window2: The right pane. :param sashPosition: The initial position of the sash. If this value is positive, it specifies the size of the left pane. If it is negative, it is absolute value gives the size of the right pane. Finally, specify 0 (default) to choose the default position (half of the total window width). Returns True if successful, False otherwise (the window was already split). SplitVertically should be called if you wish to initially view two panes. It can also be called at any subsequent time, but the application should check that the window is not currently split using IsSplit. "); DocDeclStr( virtual bool , SplitHorizontally(wxWindow *window1, wxWindow *window2, int sashPosition = 0), "Initializes the top and bottom panes of the splitter window.", " :param window1: The top pane. :param window2: The bottom pane. :param sashPosition: The initial position of the sash. If this value is positive, it specifies the size of the upper pane. If it is negative, it is absolute value gives the size of the lower pane. Finally, specify 0 (default) to choose the default position (half of the total window height). Returns True if successful, False otherwise (the window was already split). SplitHorizontally should be called if you wish to initially view two panes. It can also be called at any subsequent time, but the application should check that the window is not currently split using IsSplit. "); DocDeclStr( bool , Unsplit(wxWindow *toRemove = NULL), "Unsplits the window. Pass the pane to remove, or None to remove the right or bottom pane. Returns True if successful, False otherwise (the window was not split). This function will not actually delete the pane being removed; it sends EVT_SPLITTER_UNSPLIT which can be handled for the desired behaviour. By default, the pane being removed is only hidden.", ""); DocDeclStr( bool , ReplaceWindow(wxWindow *winOld, wxWindow *winNew), "This function replaces one of the windows managed by the SplitterWindow with another one. It is in general better to use it instead of calling Unsplit() and then resplitting the window back because it will provoke much less flicker. It is valid to call this function whether the splitter has two windows or only one. Both parameters should be non-None and winOld must specify one of the windows managed by the splitter. If the parameters are incorrect or the window couldn't be replaced, False is returned. Otherwise the function will return True, but please notice that it will not Destroy the replaced window and you may wish to do it yourself.", ""); DocDeclStr( void , UpdateSize(), "Causes any pending sizing of the sash and child panes to take place immediately. Such resizing normally takes place in idle time, in order to wait for layout to be completed. However, this can cause unacceptable flicker as the panes are resized after the window has been shown. To work around this, you can perform window layout (for example by sending a size event to the parent window), and then call this function, before showing the top-level window.", ""); DocDeclStr( bool , IsSplit() const, "Is the window split?", ""); DocDeclStr( void , SetSashSize(int width), "Sets the sash size", ""); DocDeclStr( void , SetBorderSize(int width), "Sets the border size", ""); DocDeclStr( int , GetSashSize() const, "Gets the sash size", ""); DocDeclStr( int , GetBorderSize() const, "Gets the border size", ""); DocDeclStr( void , SetSashPosition(int position, bool redraw = True), "Sets the sash position, in pixels. If redraw is Ttrue then the panes are resized and the sash and border are redrawn.", ""); DocDeclStr( int , GetSashPosition() const, "Returns the surrent sash position.", ""); DocDeclStr( void , SetMinimumPaneSize(int min), "Sets the minimum pane size in pixels. The default minimum pane size is zero, which means that either pane can be reduced to zero by dragging the sash, thus removing one of the panes. To prevent this behaviour (and veto out-of-range sash dragging), set a minimum size, for example 20 pixels. If the wx.SP_PERMIT_UNSPLIT style is used when a splitter window is created, the window may be unsplit even if minimum size is non-zero.", ""); DocDeclStr( int , GetMinimumPaneSize() const, "Gets the minimum pane size in pixels.", ""); DocDeclStr( virtual bool , SashHitTest(int x, int y, int tolerance = 5), "Tests for x, y over the sash", ""); DocDeclStr( virtual void , SizeWindows(), "Resizes subwindows", ""); void SetNeedUpdating(bool needUpdating); bool GetNeedUpdating() const; static wxVisualAttributes GetClassDefaultAttributes(wxWindowVariant variant = wxWINDOW_VARIANT_NORMAL); }; DocStr(wxSplitterEvent, "This class represents the events generated by a splitter control.", ""); class wxSplitterEvent : public wxNotifyEvent { public: wxSplitterEvent(wxEventType type = wxEVT_NULL, wxSplitterWindow *splitter = (wxSplitterWindow *)NULL); DocDeclStr( void , SetSashPosition(int pos), "This funciton is only meaningful during EVT_SPLITTER_SASH_POS_CHANGING and EVT_SPLITTER_SASH_POS_CHANGED events. In the case of _CHANGED events, sets the the new sash position. In the case of _CHANGING events, sets the new tracking bar position so visual feedback during dragging will represent that change that will actually take place. Set to -1 from the event handler code to prevent repositioning.", ""); DocDeclStr( int , GetSashPosition() const, "Returns the new sash position while in EVT_SPLITTER_SASH_POS_CHANGING and EVT_SPLITTER_SASH_POS_CHANGED events.", ""); DocDeclStr( wxWindow *, GetWindowBeingRemoved() const, "Returns a pointer to the window being removed when a splitter window is unsplit.", ""); DocDeclStr( int , GetX() const, "Returns the x coordinate of the double-click point in a EVT_SPLITTER_DCLICK event.", ""); DocDeclStr( int , GetY() const, "Returns the y coordinate of the double-click point in a EVT_SPLITTER_DCLICK event.", ""); }; %constant wxEventType wxEVT_COMMAND_SPLITTER_SASH_POS_CHANGED; %constant wxEventType wxEVT_COMMAND_SPLITTER_SASH_POS_CHANGING; %constant wxEventType wxEVT_COMMAND_SPLITTER_DOUBLECLICKED; %constant wxEventType wxEVT_COMMAND_SPLITTER_UNSPLIT; %pythoncode { EVT_SPLITTER_SASH_POS_CHANGED = wx.PyEventBinder( wxEVT_COMMAND_SPLITTER_SASH_POS_CHANGED, 1 ) EVT_SPLITTER_SASH_POS_CHANGING = wx.PyEventBinder( wxEVT_COMMAND_SPLITTER_SASH_POS_CHANGING, 1 ) EVT_SPLITTER_DOUBLECLICKED = wx.PyEventBinder( wxEVT_COMMAND_SPLITTER_DOUBLECLICKED, 1 ) EVT_SPLITTER_UNSPLIT = wx.PyEventBinder( wxEVT_COMMAND_SPLITTER_UNSPLIT, 1 ) EVT_SPLITTER_DCLICK = EVT_SPLITTER_DOUBLECLICKED } //---------------------------------------------------------------------------