## First line may be used for shbang ## This file defines the interface to Scintilla ## Copyright 2000-2002 by Neil Hodgson ## The License.txt file describes the conditions under which this software may be distributed. ## A line starting with ## is a pure comment and should be stripped by readers. ## A line starting with #! is for future shbang use ## A line starting with # followed by a space is a documentation comment and refers ## to the next feature definition. ## Each feature is defined by a line starting with fun, get, set, val or evt. ## cat -> start a category ## fun -> a function ## get -> a property get function ## set -> a property set function ## val -> definition of a constant ## evt -> an event ## enu -> associate an enumeration with a set of vals with a prefix ## lex -> associate a lexer with the lexical classes it produces ## ## All other feature names should be ignored. They may be defined in the future. ## A property may have a set function, a get function or both. Each will have ## "Get" or "Set" in their names and the corresponding name will have the obvious switch. ## A property may be subscripted, in which case the first parameter is the subscript. ## fun, get, and set features have a strict syntax: ## [=,) ## param is [=] ## Additional white space is allowed between elements. ## The syntax for evt is [=[,]*]) ## Feature names that contain an underscore are defined by Windows, so in these ## cases, using the Windows definition is preferred where available. ## The feature numbers are stable so features will not be renumbered. ## Features may be removed but they will go through a period of deprecation ## before removal which is signalled by moving them into the Deprecated category. ## ## enu has the syntax enu=[]* where all the val ## features in this file starting with a given are considered part of the ## enumeration. ## ## lex has the syntax lex=[]* ## where name is a reasonably capitalised (Python, XML) identifier or UI name, ## lexerVal is the val used to specify the lexer, and the list of prefixes is similar ## to enu. The name may not be the same as that used within the lexer so the lexerVal ## should be used to tie these entities together. ## Types: ## void ## int ## bool -> integer, 1=true, 0=false ## position -> integer position in a document ## colour -> colour integer containing red, green and blue bytes. ## string -> pointer to const character ## stringresult -> pointer to character ## cells -> pointer to array of cells, each cell containing a style byte and character byte ## textrange -> range of a min and a max position with an output string ## findtext -> searchrange, text -> foundposition ## keymod -> integer containing key in low half and modifiers in high half ## formatrange ## Types no longer used: ## findtextex -> searchrange ## charrange -> range of a min and a max position ## charrangeresult -> like charrange, but output param ## countedstring ## point -> x,y ## pointresult -> like point, but output param ## rectangle -> left,top,right,bottom ## Client code should ignore definitions containing types it does not understand, except ## for possibly #defining the constants ## String arguments may contain NUL ('\0') characters where the calls provide a length ## argument and retrieve NUL characters. All retrieved strings except for those retrieved ## by GetLine also have a NUL appended but client code should calculate the size that ## will be returned rather than relying upon the NUL whenever possible. Allow for the ## extra NUL character when allocating buffers. cat Basics ################################################ ## For Scintilla.h val INVALID_POSITION=-1 # Define start of Scintilla messages to be greater than all edit (EM_*) messages # as many EM_ messages can be used although that use is deprecated. val SCI_START=2000 val SCI_OPTIONAL_START=3000 val SCI_LEXER_START=4000 # Add text to the document. fun void AddText=2001(int length, string text) # Add array of cells to document. fun void AddStyledText=2002(int length, cells c) # Insert string at a position. fun void InsertText=2003(position pos, string text) # Delete all text in the document. fun void ClearAll=2004(,) # Set all style bytes to 0, remove all folding information. fun void ClearDocumentStyle=2005(,) # The number of characters in the document. get int GetLength=2006(,) # Returns the character byte at the position. get int GetCharAt=2007(position pos,) # Returns the position of the caret. get position GetCurrentPos=2008(,) # Returns the position of the opposite end of the selection to the caret. get position GetAnchor=2009(,) # Returns the style byte at the position. get int GetStyleAt=2010(position pos,) # Redoes the next action on the undo history. fun void Redo=2011(,) # Choose between collecting actions into the undo # history and discarding them. set void SetUndoCollection=2012(bool collectUndo,) # Select all the text in the document. fun void SelectAll=2013(,) # Remember the current position in the undo history as the position # at which the document was saved. fun void SetSavePoint=2014(,) # Retrieve a buffer of cells. # Returns the number of bytes in the buffer not including terminating nulls. fun int GetStyledText=2015(, textrange tr) # Are there any redoable actions in the undo history? fun bool CanRedo=2016(,) # Retrieve the line number at which a particular marker is located. fun int MarkerLineFromHandle=2017(int handle,) # Delete a marker. fun void MarkerDeleteHandle=2018(int handle,) # Is undo history being collected? get bool GetUndoCollection=2019(,) enu WhiteSpace=SCWS_ val SCWS_INVISIBLE=0 val SCWS_VISIBLEALWAYS=1 val SCWS_VISIBLEAFTERINDENT=2 # Are white space characters currently visible? # Returns one of SCWS_* constants. get int GetViewWS=2020(,) # Make white space characters invisible, always visible or visible outside indentation. set void SetViewWS=2021(int viewWS,) # Find the position from a point within the window. fun int PositionFromPoint=2022(int x, int y) # Find the position from a point within the window but return # INVALID_POSITION if not close to text. fun int PositionFromPointClose=2023(int x, int y) # Set caret to start of a line and ensure it is visible. fun void GotoLine=2024(int line,) # Set caret to a position and ensure it is visible. fun void GotoPos=2025(position pos,) # Set the selection anchor to a position. The anchor is the opposite # end of the selection from the caret. set void SetAnchor=2026(position posAnchor,) # Retrieve the text of the line containing the caret. # Returns the index of the caret on the line. fun int GetCurLine=2027(int length, stringresult text) # Retrieve the position of the last correctly styled character. get position GetEndStyled=2028(,) enu EndOfLine=SC_EOL_ val SC_EOL_CRLF=0 val SC_EOL_CR=1 val SC_EOL_LF=2 # Convert all line endings in the document to one mode. fun void ConvertEOLs=2029(int eolMode,) # Retrieve the current end of line mode - one of CRLF, CR, or LF. get int GetEOLMode=2030(,) # Set the current end of line mode. set void SetEOLMode=2031(int eolMode,) # Set the current styling position to pos and the styling mask to mask. # The styling mask can be used to protect some bits in each styling byte from modification. fun void StartStyling=2032(position pos, int mask) # Change style from current styling position for length characters to a style # and move the current styling position to after this newly styled segment. fun void SetStyling=2033(int length, int style) # Is drawing done first into a buffer or direct to the screen? get bool GetBufferedDraw=2034(,) # If drawing is buffered then each line of text is drawn into a bitmap buffer # before drawing it to the screen to avoid flicker. set void SetBufferedDraw=2035(bool buffered,) # Change the visible size of a tab to be a multiple of the width of a space character. set void SetTabWidth=2036(int tabWidth,) # Retrieve the visible size of a tab. get int GetTabWidth=2121(,) # The SC_CP_UTF8 value can be used to enter Unicode mode. # This is the same value as CP_UTF8 in Windows val SC_CP_UTF8=65001 # The SC_CP_DBCS value can be used to indicate a DBCS mode for GTK+. val SC_CP_DBCS=1 # Set the code page used to interpret the bytes of the document as characters. # The SC_CP_UTF8 value can be used to enter Unicode mode. set void SetCodePage=2037(int codePage,) # In palette mode, Scintilla uses the environment's palette calls to display # more colours. This may lead to ugly displays. set void SetUsePalette=2039(bool usePalette,) enu MarkerSymbol=SC_MARK_ val MARKER_MAX=31 val SC_MARK_CIRCLE=0 val SC_MARK_ROUNDRECT=1 val SC_MARK_ARROW=2 val SC_MARK_SMALLRECT=3 val SC_MARK_SHORTARROW=4 val SC_MARK_EMPTY=5 val SC_MARK_ARROWDOWN=6 val SC_MARK_MINUS=7 val SC_MARK_PLUS=8 # Shapes used for outlining column. val SC_MARK_VLINE=9 val SC_MARK_LCORNER=10 val SC_MARK_TCORNER=11 val SC_MARK_BOXPLUS=12 val SC_MARK_BOXPLUSCONNECTED=13 val SC_MARK_BOXMINUS=14 val SC_MARK_BOXMINUSCONNECTED=15 val SC_MARK_LCORNERCURVE=16 val SC_MARK_TCORNERCURVE=17 val SC_MARK_CIRCLEPLUS=18 val SC_MARK_CIRCLEPLUSCONNECTED=19 val SC_MARK_CIRCLEMINUS=20 val SC_MARK_CIRCLEMINUSCONNECTED=21 # Invisible mark that only sets the line background color. val SC_MARK_BACKGROUND=22 val SC_MARK_DOTDOTDOT=23 val SC_MARK_ARROWS=24 val SC_MARK_PIXMAP=25 val SC_MARK_CHARACTER=10000 enu MarkerOutline=SC_MARKNUM_ # Markers used for outlining column. val SC_MARKNUM_FOLDEREND=25 val SC_MARKNUM_FOLDEROPENMID=26 val SC_MARKNUM_FOLDERMIDTAIL=27 val SC_MARKNUM_FOLDERTAIL=28 val SC_MARKNUM_FOLDERSUB=29 val SC_MARKNUM_FOLDER=30 val SC_MARKNUM_FOLDEROPEN=31 val SC_MASK_FOLDERS=0xFE000000 # Set the symbol used for a particular marker number. fun void MarkerDefine=2040(int markerNumber, int markerSymbol) # Set the foreground colour used for a particular marker number. fun void MarkerSetFore=2041(int markerNumber, colour fore) # Set the background colour used for a particular marker number. fun void MarkerSetBack=2042(int markerNumber, colour back) # Add a marker to a line, returning an ID which can be used to find or delete the marker. fun int MarkerAdd=2043(int line, int markerNumber) # Delete a marker from a line. fun void MarkerDelete=2044(int line, int markerNumber) # Delete all markers with a particular number from all lines. fun void MarkerDeleteAll=2045(int markerNumber,) # Get a bit mask of all the markers set on a line. fun int MarkerGet=2046(int line,) # Find the next line after lineStart that includes a marker in mask. fun int MarkerNext=2047(int lineStart, int markerMask) # Find the previous line before lineStart that includes a marker in mask. fun int MarkerPrevious=2048(int lineStart, int markerMask) # Define a marker from a pixmap. fun void MarkerDefinePixmap=2049(int markerNumber, string pixmap) enu MarginType=SC_MARGIN_ val SC_MARGIN_SYMBOL=0 val SC_MARGIN_NUMBER=1 # Set a margin to be either numeric or symbolic. set void SetMarginTypeN=2240(int margin, int marginType) # Retrieve the type of a margin. get int GetMarginTypeN=2241(int margin,) # Set the width of a margin to a width expressed in pixels. set void SetMarginWidthN=2242(int margin, int pixelWidth) # Retrieve the width of a margin in pixels. get int GetMarginWidthN=2243(int margin,) # Set a mask that determines which markers are displayed in a margin. set void SetMarginMaskN=2244(int margin, int mask) # Retrieve the marker mask of a margin. get int GetMarginMaskN=2245(int margin,) # Make a margin sensitive or insensitive to mouse clicks. set void SetMarginSensitiveN=2246(int margin, bool sensitive) # Retrieve the mouse click sensitivity of a margin. get bool GetMarginSensitiveN=2247(int margin,) # Styles in range 32..37 are predefined for parts of the UI and are not used as normal styles. # Styles 38 and 39 are for future use. enu StylesCommon=STYLE_ val STYLE_DEFAULT=32 val STYLE_LINENUMBER=33 val STYLE_BRACELIGHT=34 val STYLE_BRACEBAD=35 val STYLE_CONTROLCHAR=36 val STYLE_INDENTGUIDE=37 val STYLE_LASTPREDEFINED=39 val STYLE_MAX=127 # Character set identifiers are used in StyleSetCharacterSet. # The values are the same as the Windows *_CHARSET values. enu CharacterSet=SC_CHARSET_ val SC_CHARSET_ANSI=0 val SC_CHARSET_DEFAULT=1 val SC_CHARSET_BALTIC=186 val SC_CHARSET_CHINESEBIG5=136 val SC_CHARSET_EASTEUROPE=238 val SC_CHARSET_GB2312=134 val SC_CHARSET_GREEK=161 val SC_CHARSET_HANGUL=129 val SC_CHARSET_MAC=77 val SC_CHARSET_OEM=255 val SC_CHARSET_RUSSIAN=204 val SC_CHARSET_SHIFTJIS=128 val SC_CHARSET_SYMBOL=2 val SC_CHARSET_TURKISH=162 val SC_CHARSET_JOHAB=130 val SC_CHARSET_HEBREW=177 val SC_CHARSET_ARABIC=178 val SC_CHARSET_VIETNAMESE=163 val SC_CHARSET_THAI=222 # Clear all the styles and make equivalent to the global default style. set void StyleClearAll=2050(,) # Set the foreground colour of a style. set void StyleSetFore=2051(int style, colour fore) # Set the background colour of a style. set void StyleSetBack=2052(int style, colour back) # Set a style to be bold or not. set void StyleSetBold=2053(int style, bool bold) # Set a style to be italic or not. set void StyleSetItalic=2054(int style, bool italic) # Set the size of characters of a style. set void StyleSetSize=2055(int style, int sizePoints) # Set the font of a style. set void StyleSetFont=2056(int style, string fontName) # Set a style to have its end of line filled or not. set void StyleSetEOLFilled=2057(int style, bool filled) # Reset the default style to its state at startup fun void StyleResetDefault=2058(,) # Set a style to be underlined or not. set void StyleSetUnderline=2059(int style, bool underline) enu CaseVisible=SC_CASE_ val SC_CASE_MIXED=0 val SC_CASE_UPPER=1 val SC_CASE_LOWER=2 # Set a style to be mixed case, or to force upper or lower case. set void StyleSetCase=2060(int style, int caseForce) # Set the character set of the font in a style. set void StyleSetCharacterSet=2066(int style, int characterSet) # Set a style to be a hotspot or not. set void StyleSetHotSpot=2409(int style, bool hotspot) # Set the foreground colour of the selection and whether to use this setting. fun void SetSelFore=2067(bool useSetting, colour fore) # Set the background colour of the selection and whether to use this setting. fun void SetSelBack=2068(bool useSetting, colour back) # Set the foreground colour of the caret. set void SetCaretFore=2069(colour fore,) # When key+modifier combination km is pressed perform msg. fun void AssignCmdKey=2070(keymod km, int msg) # When key+modifier combination km do nothing. fun void ClearCmdKey=2071(keymod km,) # Drop all key mappings. fun void ClearAllCmdKeys=2072(,) # Set the styles for a segment of the document. fun void SetStylingEx=2073(int length, string styles) # Set a style to be visible or not. set void StyleSetVisible=2074(int style, bool visible) # Get the time in milliseconds that the caret is on and off. get int GetCaretPeriod=2075(,) # Get the time in milliseconds that the caret is on and off. 0 = steady on. set void SetCaretPeriod=2076(int periodMilliseconds,) # Set the set of characters making up words for when moving or selecting by word. set void SetWordChars=2077(, string characters) # Start a sequence of actions that is undone and redone as a unit. # May be nested. fun void BeginUndoAction=2078(,) # End a sequence of actions that is undone and redone as a unit. fun void EndUndoAction=2079(,) enu IndicatorStyle=INDIC_ val INDIC_MAX=7 val INDIC_PLAIN=0 val INDIC_SQUIGGLE=1 val INDIC_TT=2 val INDIC_DIAGONAL=3 val INDIC_STRIKE=4 val INDIC_HIDDEN=5 val INDIC0_MASK=0x20 val INDIC1_MASK=0x40 val INDIC2_MASK=0x80 val INDICS_MASK=0xE0 # Set an indicator to plain, squiggle or TT. set void IndicSetStyle=2080(int indic, int style) # Retrieve the style of an indicator. get int IndicGetStyle=2081(int indic,) # Set the foreground colour of an indicator. set void IndicSetFore=2082(int indic, colour fore) # Retrieve the foreground colour of an indicator. get colour IndicGetFore=2083(int indic,) # Set the foreground colour of all whitespace and whether to use this setting. fun void SetWhitespaceFore=2084(bool useSetting, colour fore) # Set the background colour of all whitespace and whether to use this setting. fun void SetWhitespaceBack=2085(bool useSetting, colour back) # Divide each styling byte into lexical class bits (default: 5) and indicator # bits (default: 3). If a lexer requires more than 32 lexical states, then this # is used to expand the possible states. set void SetStyleBits=2090(int bits,) # Retrieve number of bits in style bytes used to hold the lexical state. get int GetStyleBits=2091(,) # Used to hold extra styling information for each line. set void SetLineState=2092(int line, int state) # Retrieve the extra styling information for a line. get int GetLineState=2093(int line,) # Retrieve the last line number that has line state. get int GetMaxLineState=2094(,) # Is the background of the line containing the caret in a different colour? get bool GetCaretLineVisible=2095(,) # Display the background of the line containing the caret in a different colour. set void SetCaretLineVisible=2096(bool show,) # Get the colour of the background of the line containing the caret. get colour GetCaretLineBack=2097(,) # Set the colour of the background of the line containing the caret. set void SetCaretLineBack=2098(colour back,) # Set a style to be changeable or not (read only). # Experimental feature, currently buggy. set void StyleSetChangeable=2099(int style, bool changeable) # Display a auto-completion list. # The lenEntered parameter indicates how many characters before # the caret should be used to provide context. fun void AutoCShow=2100(int lenEntered, string itemList) # Remove the auto-completion list from the screen. fun void AutoCCancel=2101(,) # Is there an auto-completion list visible? fun bool AutoCActive=2102(,) # Retrieve the position of the caret when the auto-completion list was displayed. fun position AutoCPosStart=2103(,) # User has selected an item so remove the list and insert the selection. fun void AutoCComplete=2104(,) # Define a set of character that when typed cancel the auto-completion list. fun void AutoCStops=2105(, string characterSet) # Change the separator character in the string setting up an auto-completion list. # Default is space but can be changed if items contain space. set void AutoCSetSeparator=2106(int separatorCharacter,) # Retrieve the auto-completion list separator character. get int AutoCGetSeparator=2107(,) # Select the item in the auto-completion list that starts with a string. fun void AutoCSelect=2108(, string text) # Should the auto-completion list be cancelled if the user backspaces to a # position before where the box was created. set void AutoCSetCancelAtStart=2110(bool cancel,) # Retrieve whether auto-completion cancelled by backspacing before start. get bool AutoCGetCancelAtStart=2111(,) # Define a set of characters that when typed will cause the autocompletion to # choose the selected item. set void AutoCSetFillUps=2112(, string characterSet) # Should a single item auto-completion list automatically choose the item. set void AutoCSetChooseSingle=2113(bool chooseSingle,) # Retrieve whether a single item auto-completion list automatically choose the item. get bool AutoCGetChooseSingle=2114(,) # Set whether case is significant when performing auto-completion searches. set void AutoCSetIgnoreCase=2115(bool ignoreCase,) # Retrieve state of ignore case flag. get bool AutoCGetIgnoreCase=2116(,) # Display a list of strings and send notification when user chooses one. fun void UserListShow=2117(int listType, string itemList) # Set whether or not autocompletion is hidden automatically when nothing matches. set void AutoCSetAutoHide=2118(bool autoHide,) # Retrieve whether or not autocompletion is hidden automatically when nothing matches. get bool AutoCGetAutoHide=2119(,) # Set whether or not autocompletion deletes any word characters # after the inserted text upon completion. set void AutoCSetDropRestOfWord=2270(bool dropRestOfWord,) # Retrieve whether or not autocompletion deletes any word characters # after the inserted text upon completion. get bool AutoCGetDropRestOfWord=2271(,) # Register an XPM image for use in autocompletion lists. fun void RegisterImage=2405(int type, string xpmData) # Clear all the registered XPM images. fun void ClearRegisteredImages=2408(,) # Retrieve the auto-completion list type-separator character. get int AutoCGetTypeSeparator=2285(,) # Change the type-separator character in the string setting up an auto-completion list. # Default is '?' but can be changed if items contain '?'. set void AutoCSetTypeSeparator=2286(int separatorCharacter,) # Set the number of spaces used for one level of indentation. set void SetIndent=2122(int indentSize,) # Retrieve indentation size. get int GetIndent=2123(,) # Indentation will only use space characters if useTabs is false, otherwise # it will use a combination of tabs and spaces. set void SetUseTabs=2124(bool useTabs,) # Retrieve whether tabs will be used in indentation. get bool GetUseTabs=2125(,) # Change the indentation of a line to a number of columns. set void SetLineIndentation=2126(int line, int indentSize) # Retrieve the number of columns that a line is indented. get int GetLineIndentation=2127(int line,) # Retrieve the position before the first non indentation character on a line. get position GetLineIndentPosition=2128(int line,) # Retrieve the column number of a position, taking tab width into account. get int GetColumn=2129(position pos,) # Show or hide the horizontal scroll bar. set void SetHScrollBar=2130(bool show,) # Is the horizontal scroll bar visible? get bool GetHScrollBar=2131(,) # Show or hide indentation guides. set void SetIndentationGuides=2132(bool show,) # Are the indentation guides visible? get bool GetIndentationGuides=2133(,) # Set the highlighted indentation guide column. # 0 = no highlighted guide. set void SetHighlightGuide=2134(int column,) # Get the highlighted indentation guide column. get int GetHighlightGuide=2135(,) # Get the position after the last visible characters on a line. get int GetLineEndPosition=2136(int line,) # Get the code page used to interpret the bytes of the document as characters. get int GetCodePage=2137(,) # Get the foreground colour of the caret. get colour GetCaretFore=2138(,) # In palette mode? get bool GetUsePalette=2139(,) # In read-only mode? get bool GetReadOnly=2140(,) # Sets the position of the caret. set void SetCurrentPos=2141(position pos,) # Sets the position that starts the selection - this becomes the anchor. set void SetSelectionStart=2142(position pos,) # Returns the position at the start of the selection. get position GetSelectionStart=2143(,) # Sets the position that ends the selection - this becomes the currentPosition. set void SetSelectionEnd=2144(position pos,) # Returns the position at the end of the selection. get position GetSelectionEnd=2145(,) # Sets the print magnification added to the point size of each style for printing. set void SetPrintMagnification=2146(int magnification,) # Returns the print magnification. get int GetPrintMagnification=2147(,) enu PrintOption=SC_PRINT_ # PrintColourMode - use same colours as screen. val SC_PRINT_NORMAL=0 # PrintColourMode - invert the light value of each style for printing. val SC_PRINT_INVERTLIGHT=1 # PrintColourMode - force black text on white background for printing. val SC_PRINT_BLACKONWHITE=2 # PrintColourMode - text stays coloured, but all background is forced to be white for printing. val SC_PRINT_COLOURONWHITE=3 # PrintColourMode - only the default-background is forced to be white for printing. val SC_PRINT_COLOURONWHITEDEFAULTBG=4 # Modify colours when printing for clearer printed text. set void SetPrintColourMode=2148(int mode,) # Returns the print colour mode. get int GetPrintColourMode=2149(,) enu FindOption=SCFIND_ val SCFIND_WHOLEWORD=2 val SCFIND_MATCHCASE=4 val SCFIND_WORDSTART=0x00100000 val SCFIND_REGEXP=0x00200000 val SCFIND_POSIX=0x00400000 # Find some text in the document. fun position FindText=2150(int flags, findtext ft) # On Windows, will draw the document into a display context such as a printer. fun void FormatRange=2151(bool draw, formatrange fr) # Retrieve the display line at the top of the display. get int GetFirstVisibleLine=2152(,) # Retrieve the contents of a line. # Returns the length of the line. fun int GetLine=2153(int line, stringresult text) # Returns the number of lines in the document. There is always at least one. get int GetLineCount=2154(,) # Sets the size in pixels of the left margin. set void SetMarginLeft=2155(, int pixelWidth) # Returns the size in pixels of the left margin. get int GetMarginLeft=2156(,) # Sets the size in pixels of the right margin. set void SetMarginRight=2157(, int pixelWidth) # Returns the size in pixels of the right margin. get int GetMarginRight=2158(,) # Is the document different from when it was last saved? get bool GetModify=2159(,) # Select a range of text. fun void SetSel=2160(position start, position end) # Retrieve the selected text. # Return the length of the text. fun int GetSelText=2161(,stringresult text) # Retrieve a range of text. # Return the length of the text. fun int GetTextRange=2162(, textrange tr) # Draw the selection in normal style or with selection highlighted. fun void HideSelection=2163(bool normal,) # Retrieve the x value of the point in the window where a position is displayed. fun int PointXFromPosition=2164(, position pos) # Retrieve the y value of the point in the window where a position is displayed. fun int PointYFromPosition=2165(, position pos) # Retrieve the line containing a position. fun int LineFromPosition=2166(position pos,) # Retrieve the position at the start of a line. fun int PositionFromLine=2167(int line,) # Scroll horizontally and vertically. fun void LineScroll=2168(int columns, int lines) # Ensure the caret is visible. fun void ScrollCaret=2169(,) # Replace the selected text with the argument text. fun void ReplaceSel=2170(, string text) # Set to read only or read write. set void SetReadOnly=2171(bool readOnly,) # Null operation. fun void Null=2172(,) # Will a paste succeed? fun bool CanPaste=2173(,) # Are there any undoable actions in the undo history? fun bool CanUndo=2174(,) # Delete the undo history. fun void EmptyUndoBuffer=2175(,) # Undo one action in the undo history. fun void Undo=2176(,) # Cut the selection to the clipboard. fun void Cut=2177(,) # Copy the selection to the clipboard. fun void Copy=2178(,) # Paste the contents of the clipboard into the document replacing the selection. fun void Paste=2179(,) # Clear the selection. fun void Clear=2180(,) # Replace the contents of the document with the argument text. fun void SetText=2181(, string text) # Retrieve all the text in the document. # Returns number of characters retrieved. fun int GetText=2182(int length, stringresult text) # Retrieve the number of characters in the document. get int GetTextLength=2183(,) # Retrieve a pointer to a function that processes messages for this Scintilla. get int GetDirectFunction=2184(,) # Retrieve a pointer value to use as the first argument when calling # the function returned by GetDirectFunction. get int GetDirectPointer=2185(,) # Set to overtype (true) or insert mode. set void SetOvertype=2186(bool overtype,) # Returns true if overtype mode is active otherwise false is returned. get bool GetOvertype=2187(,) # Set the width of the insert mode caret. set void SetCaretWidth=2188(int pixelWidth,) # Returns the width of the insert mode caret. get int GetCaretWidth=2189(,) # Sets the position that starts the target which is used for updating the # document without affecting the scroll position. set void SetTargetStart=2190(position pos,) # Get the position that starts the target. get position GetTargetStart=2191(,) # Sets the position that ends the target which is used for updating the # document without affecting the scroll position. set void SetTargetEnd=2192(position pos,) # Get the position that ends the target. get position GetTargetEnd=2193(,) # Replace the target text with the argument text. # Text is counted so it can contain nulls. # Returns the length of the replacement text. fun int ReplaceTarget=2194(int length, string text) # Replace the target text with the argument text after \d processing. # Text is counted so it can contain nulls. # Looks for \d where d is between 1 and 9 and replaces these with the strings # matched in the last search operation which were surrounded by \( and \). # Returns the length of the replacement text including any change # caused by processing the \d patterns. fun int ReplaceTargetRE=2195(int length, string text) # Search for a counted string in the target and set the target to the found # range. Text is counted so it can contain nulls. # Returns length of range or -1 for failure in which case target is not moved. fun int SearchInTarget=2197(int length, string text) # Set the search flags used by SearchInTarget. set void SetSearchFlags=2198(int flags,) # Get the search flags used by SearchInTarget. get int GetSearchFlags=2199(,) # Show a call tip containing a definition near position pos. fun void CallTipShow=2200(position pos, string definition) # Remove the call tip from the screen. fun void CallTipCancel=2201(,) # Is there an active call tip? fun bool CallTipActive=2202(,) # Retrieve the position where the caret was before displaying the call tip. fun position CallTipPosStart=2203(,) # Highlight a segment of the definition. fun void CallTipSetHlt=2204(int start, int end) # Set the background colour for the call tip. set void CallTipSetBack=2205(colour back,) # Set the foreground colour for the call tip. set void CallTipSetFore=2206(colour fore,) # Set the foreground colour for the highlighted part of the call tip. set void CallTipSetForeHlt=2207(colour fore,) # Find the display line of a document line taking hidden lines into account. fun int VisibleFromDocLine=2220(int line,) # Find the document line of a display line taking hidden lines into account. fun int DocLineFromVisible=2221(int lineDisplay,) enu FoldLevel=SC_FOLDLEVEL val SC_FOLDLEVELBASE=0x400 val SC_FOLDLEVELWHITEFLAG=0x1000 val SC_FOLDLEVELHEADERFLAG=0x2000 val SC_FOLDLEVELBOXHEADERFLAG=0x4000 val SC_FOLDLEVELBOXFOOTERFLAG=0x8000 val SC_FOLDLEVELCONTRACTED=0x10000 val SC_FOLDLEVELUNINDENT=0x20000 val SC_FOLDLEVELNUMBERMASK=0x0FFF # Set the fold level of a line. # This encodes an integer level along with flags indicating whether the # line is a header and whether it is effectively white space. set void SetFoldLevel=2222(int line, int level) # Retrieve the fold level of a line. get int GetFoldLevel=2223(int line,) # Find the last child line of a header line. get int GetLastChild=2224(int line, int level) # Find the parent line of a child line. get int GetFoldParent=2225(int line,) # Make a range of lines visible. fun void ShowLines=2226(int lineStart, int lineEnd) # Make a range of lines invisible. fun void HideLines=2227(int lineStart, int lineEnd) # Is a line visible? get bool GetLineVisible=2228(int line,) # Show the children of a header line. set void SetFoldExpanded=2229(int line, bool expanded) # Is a header line expanded? get bool GetFoldExpanded=2230(int line,) # Switch a header line between expanded and contracted. fun void ToggleFold=2231(int line,) # Ensure a particular line is visible by expanding any header line hiding it. fun void EnsureVisible=2232(int line,) enu FoldFlag=SC_FOLDFLAG_ val SC_FOLDFLAG_LINEBEFORE_EXPANDED=0x0002 val SC_FOLDFLAG_LINEBEFORE_CONTRACTED=0x0004 val SC_FOLDFLAG_LINEAFTER_EXPANDED=0x0008 val SC_FOLDFLAG_LINEAFTER_CONTRACTED=0x0010 val SC_FOLDFLAG_LEVELNUMBERS=0x0040 val SC_FOLDFLAG_BOX=0x0001 # Set some style options for folding. fun void SetFoldFlags=2233(int flags,) # Ensure a particular line is visible by expanding any header line hiding it. # Use the currently set visibility policy to determine which range to display. fun void EnsureVisibleEnforcePolicy=2234(int line,) # Sets whether a tab pressed when caret is within indentation indents. set void SetTabIndents=2260(bool tabIndents,) # Does a tab pressed when caret is within indentation indent? get bool GetTabIndents=2261(,) # Sets whether a backspace pressed when caret is within indentation unindents. set void SetBackSpaceUnIndents=2262(bool bsUnIndents,) # Does a backspace pressed when caret is within indentation unindent? get bool GetBackSpaceUnIndents=2263(,) val SC_TIME_FOREVER=10000000 # Sets the time the mouse must sit still to generate a mouse dwell event. set void SetMouseDwellTime=2264(int periodMilliseconds,) # Retrieve the time the mouse must sit still to generate a mouse dwell event. get int GetMouseDwellTime=2265(,) # Get position of start of word. fun int WordStartPosition=2266(position pos, bool onlyWordCharacters) # Get position of end of word. fun int WordEndPosition=2267(position pos, bool onlyWordCharacters) enu Wrap=SC_WRAP_ val SC_WRAP_NONE=0 val SC_WRAP_WORD=1 # Sets whether text is word wrapped. set void SetWrapMode=2268(int mode,) # Retrieve whether text is word wrapped. get int GetWrapMode=2269(,) enu LineCache=SC_CACHE_ val SC_CACHE_NONE=0 val SC_CACHE_CARET=1 val SC_CACHE_PAGE=2 val SC_CACHE_DOCUMENT=3 # Sets the degree of caching of layout information. set void SetLayoutCache=2272(int mode,) # Retrieve the degree of caching of layout information. get int GetLayoutCache=2273(,) # Sets the document width assumed for scrolling. set void SetScrollWidth=2274(int pixelWidth,) # Retrieve the document width assumed for scrolling. get int GetScrollWidth=2275(,) # Measure the pixel width of some text in a particular style. # Nul terminated text argument. # Does not handle tab or control characters. fun int TextWidth=2276(int style, string text) # Sets the scroll range so that maximum scroll position has # the last line at the bottom of the view (default). # Setting this to false allows scrolling one page below the last line. set void SetEndAtLastLine=2277(bool endAtLastLine,) # Retrieve whether the maximum scroll position has the last # line at the bottom of the view. get int GetEndAtLastLine=2278(,) # Retrieve the height of a particular line of text in pixels. fun int TextHeight=2279(int line,) # Show or hide the vertical scroll bar. set void SetVScrollBar=2280(bool show,) # Is the vertical scroll bar visible? get bool GetVScrollBar=2281(,) # Append a string to the end of the document without changing the selection. fun void AppendText=2282(int length, string text) # Is drawing done in two phases with backgrounds drawn before foregrounds? get bool GetTwoPhaseDraw=2283(,) # In twoPhaseDraw mode, drawing is performed in two phases, first the background # and then the foreground. This avoids chopping off characters that overlap the next run. set void SetTwoPhaseDraw=2284(bool twoPhase,) # Make the target range start and end be the same as the selection range start and end. fun void TargetFromSelection=2287(,) # Join the lines in the target. fun void LinesJoin=2288(,) # Split the lines in the target into lines that are less wide than pixelWidth # where possible. fun void LinesSplit=2289(int pixelWidth,) # Set the colours used as a chequerboard pattern in the fold margin fun void SetFoldMarginColour=2290(bool useSetting, colour back) fun void SetFoldMarginHiColour=2291(bool useSetting, colour fore) ## New messages go here ## Start of key messages # Move caret down one line. fun void LineDown=2300(,) # Move caret down one line extending selection to new caret position. fun void LineDownExtend=2301(,) # Move caret up one line. fun void LineUp=2302(,) # Move caret up one line extending selection to new caret position. fun void LineUpExtend=2303(,) # Move caret left one character. fun void CharLeft=2304(,) # Move caret left one character extending selection to new caret position. fun void CharLeftExtend=2305(,) # Move caret right one character. fun void CharRight=2306(,) # Move caret right one character extending selection to new caret position. fun void CharRightExtend=2307(,) # Move caret left one word. fun void WordLeft=2308(,) # Move caret left one word extending selection to new caret position. fun void WordLeftExtend=2309(,) # Move caret right one word. fun void WordRight=2310(,) # Move caret right one word extending selection to new caret position. fun void WordRightExtend=2311(,) # Move caret to first position on line. fun void Home=2312(,) # Move caret to first position on line extending selection to new caret position. fun void HomeExtend=2313(,) # Move caret to last position on line. fun void LineEnd=2314(,) # Move caret to last position on line extending selection to new caret position. fun void LineEndExtend=2315(,) # Move caret to first position in document. fun void DocumentStart=2316(,) # Move caret to first position in document extending selection to new caret position. fun void DocumentStartExtend=2317(,) # Move caret to last position in document. fun void DocumentEnd=2318(,) # Move caret to last position in document extending selection to new caret position. fun void DocumentEndExtend=2319(,) # Move caret one page up. fun void PageUp=2320(,) # Move caret one page up extending selection to new caret position. fun void PageUpExtend=2321(,) # Move caret one page down. fun void PageDown=2322(,) # Move caret one page down extending selection to new caret position. fun void PageDownExtend=2323(,) # Switch from insert to overtype mode or the reverse. fun void EditToggleOvertype=2324(,) # Cancel any modes such as call tip or auto-completion list display. fun void Cancel=2325(,) # Delete the selection or if no selection, the character before the caret. fun void DeleteBack=2326(,) # If selection is empty or all on one line replace the selection with a tab character. # If more than one line selected, indent the lines. fun void Tab=2327(,) # Dedent the selected lines. fun void BackTab=2328(,) # Insert a new line, may use a CRLF, CR or LF depending on EOL mode. fun void NewLine=2329(,) # Insert a Form Feed character. fun void FormFeed=2330(,) # Move caret to before first visible character on line. # If already there move to first character on line. fun void VCHome=2331(,) # Like VCHome but extending selection to new caret position. fun void VCHomeExtend=2332(,) # Magnify the displayed text by increasing the sizes by 1 point. fun void ZoomIn=2333(,) # Make the displayed text smaller by decreasing the sizes by 1 point. fun void ZoomOut=2334(,) # Delete the word to the left of the caret. fun void DelWordLeft=2335(,) # Delete the word to the right of the caret. fun void DelWordRight=2336(,) # Cut the line containing the caret. fun void LineCut=2337(,) # Delete the line containing the caret. fun void LineDelete=2338(,) # Switch the current line with the previous. fun void LineTranspose=2339(,) # Duplicate the current line. fun void LineDuplicate=2404(,) # Transform the selection to lower case. fun void LowerCase=2340(,) # Transform the selection to upper case. fun void UpperCase=2341(,) # Scroll the document down, keeping the caret visible. fun void LineScrollDown=2342(,) # Scroll the document up, keeping the caret visible. fun void LineScrollUp=2343(,) # Delete the selection or if no selection, the character before the caret. # Will not delete the character before at the start of a line. fun void DeleteBackNotLine=2344(,) # Move caret to first position on display line. fun void HomeDisplay=2345(,) # Move caret to first position on display line extending selection to # new caret position. fun void HomeDisplayExtend=2346(,) # Move caret to last position on display line. fun void LineEndDisplay=2347(,) # Move caret to last position on display line extending selection to new # caret position. fun void LineEndDisplayExtend=2348(,) # These are like their namesakes Home(Extend)?, LineEnd(Extend)?, VCHome(Extend)? # except they behave differently when word-wrap is enabled: # They go first to the start / end of the display line, like (Home|LineEnd)Display # The difference is that, the cursor is already at the point, it goes on to the start # or end of the document line, as appropriate for (Home|LineEnd|VCHome)Extend. fun void HomeWrap=2349(,) fun void HomeWrapExtend=2450(,) fun void LineEndWrap=2451(,) fun void LineEndWrapExtend=2452(,) fun void VCHomeWrap=2453(,) fun void VCHomeWrapExtend=2454(,) # Copy the line containing the caret. fun void LineCopy=2455(,) # Move the caret inside current view if it's not there already. fun void MoveCaretInsideView=2401(,) # How many characters are on a line, not including end of line characters? fun int LineLength=2350(int line,) # Highlight the characters at two positions. fun void BraceHighlight=2351(position pos1, position pos2) # Highlight the character at a position indicating there is no matching brace. fun void BraceBadLight=2352(position pos,) # Find the position of a matching brace or INVALID_POSITION if no match. fun position BraceMatch=2353(position pos,) # Are the end of line characters visible? get bool GetViewEOL=2355(,) # Make the end of line characters visible or invisible. set void SetViewEOL=2356(bool visible,) # Retrieve a pointer to the document object. get int GetDocPointer=2357(,) # Change the document object used. set void SetDocPointer=2358(,int pointer) # Set which document modification events are sent to the container. set void SetModEventMask=2359(int mask,) enu EdgeVisualStyle=EDGE_ val EDGE_NONE=0 val EDGE_LINE=1 val EDGE_BACKGROUND=2 # Retrieve the column number which text should be kept within. get int GetEdgeColumn=2360(,) # Set the column number of the edge. # If text goes past the edge then it is highlighted. set void SetEdgeColumn=2361(int column,) # Retrieve the edge highlight mode. get int GetEdgeMode=2362(,) # The edge may be displayed by a line (EDGE_LINE) or by highlighting text that # goes beyond it (EDGE_BACKGROUND) or not displayed at all (EDGE_NONE). set void SetEdgeMode=2363(int mode,) # Retrieve the colour used in edge indication. get colour GetEdgeColour=2364(,) # Change the colour used in edge indication. set void SetEdgeColour=2365(colour edgeColour,) # Sets the current caret position to be the search anchor. fun void SearchAnchor=2366(,) # Find some text starting at the search anchor. # Does not ensure the selection is visible. fun int SearchNext=2367(int flags, string text) # Find some text starting at the search anchor and moving backwards. # Does not ensure the selection is visible. fun int SearchPrev=2368(int flags, string text) # Retrieves the number of lines completely visible. get int LinesOnScreen=2370(,) # Set whether a pop up menu is displayed automatically when the user presses # the wrong mouse button. fun void UsePopUp=2371(bool allowPopUp,) # Is the selection rectangular? The alternative is the more common stream selection. get bool SelectionIsRectangle=2372(,) # Set the zoom level. This number of points is added to the size of all fonts. # It may be positive to magnify or negative to reduce. set void SetZoom=2373(int zoom,) # Retrieve the zoom level. get int GetZoom=2374(,) # Create a new document object. # Starts with reference count of 1 and not selected into editor. fun int CreateDocument=2375(,) # Extend life of document. fun void AddRefDocument=2376(, int doc) # Release a reference to the document, deleting document if it fades to black. fun void ReleaseDocument=2377(, int doc) # Get which document modification events are sent to the container. get int GetModEventMask=2378(,) # Change internal focus flag. set void SetFocus=2380(bool focus,) # Get internal focus flag. get bool GetFocus=2381(,) # Change error status - 0 = OK. set void SetStatus=2382(int statusCode,) # Get error status. get int GetStatus=2383(,) # Set whether the mouse is captured when its button is pressed. set void SetMouseDownCaptures=2384(bool captures,) # Get whether mouse gets captured. get bool GetMouseDownCaptures=2385(,) enu CursorShape=SC_CURSOR val SC_CURSORNORMAL=-1 val SC_CURSORWAIT=4 # Sets the cursor to one of the SC_CURSOR* values. set void SetCursor=2386(int cursorType,) # Get cursor type. get int GetCursor=2387(,) # Change the way control characters are displayed: # If symbol is < 32, keep the drawn way, else, use the given character. set void SetControlCharSymbol=2388(int symbol,) # Get the way control characters are displayed. get int GetControlCharSymbol=2389(,) # Move to the previous change in capitalisation. fun void WordPartLeft=2390(,) # Move to the previous change in capitalisation extending selection # to new caret position. fun void WordPartLeftExtend=2391(,) # Move to the change next in capitalisation. fun void WordPartRight=2392(,) # Move to the next change in capitalisation extending selection # to new caret position. fun void WordPartRightExtend=2393(,) # Constants for use with SetVisiblePolicy, similar to SetCaretPolicy. val VISIBLE_SLOP=0x01 val VISIBLE_STRICT=0x04 # Set the way the display area is determined when a particular line # is to be moved to by Find, FindNext, GotoLine, etc. fun void SetVisiblePolicy=2394(int visiblePolicy, int visibleSlop) # Delete back from the current position to the start of the line. fun void DelLineLeft=2395(,) # Delete forwards from the current position to the end of the line. fun void DelLineRight=2396(,) # Get and Set the xOffset (ie, horizonal scroll position). set void SetXOffset=2397(int newOffset,) get int GetXOffset=2398(,) # Set the last x chosen value to be the caret x position fun void ChooseCaretX=2399(,) # Set the focus to this Scintilla widget. # GTK+ Specific. fun void GrabFocus=2400(,) enu CaretPolicy = CARET_ # Caret policy, used by SetXCaretPolicy and SetYCaretPolicy. # If CARET_SLOP is set, we can define a slop value: caretSlop. # This value defines an unwanted zone (UZ) where the caret is... unwanted. # This zone is defined as a number of pixels near the vertical margins, # and as a number of lines near the horizontal margins. # By keeping the caret away from the edges, it is seen within its context, # so it is likely that the identifier that the caret is on can be completely seen, # and that the current line is seen with some of the lines following it which are # often dependent on that line. val CARET_SLOP=0x01 # If CARET_STRICT is set, the policy is enforced... strictly. # The caret is centred on the display if slop is not set, # and cannot go in the UZ if slop is set. val CARET_STRICT=0x04 # If CARET_JUMPS is set, the display is moved more energetically # so the caret can move in the same direction longer before the policy is applied again. val CARET_JUMPS=0x10 # If CARET_EVEN is not set, instead of having symmetrical UZs, # the left and bottom UZs are extended up to right and top UZs respectively. # This way, we favour the displaying of useful information: the begining of lines, # where most code reside, and the lines after the caret, eg. the body of a function. val CARET_EVEN=0x08 # Set the way the caret is kept visible when going sideway. # The exclusion zone is given in pixels. fun void SetXCaretPolicy=2402(int caretPolicy, int caretSlop) # Set the way the line the caret is on is kept visible. # The exclusion zone is given in lines. fun void SetYCaretPolicy=2403(int caretPolicy, int caretSlop) # Set printing to line wrapped (SC_WRAP_WORD) or not line wrapped (SC_WRAP_NONE). set void SetPrintWrapMode=2406(int mode,) # Is printing line wrapped. get int GetPrintWrapMode=2407(,) # Set a fore colour for active hotspots. set void SetHotspotActiveFore=2410(bool useSetting, colour fore) # Set a back colour for active hotspots. set void SetHotspotActiveBack=2411(bool useSetting, colour back) # Enable / Disable underlining active hotspots. set void SetHotspotActiveUnderline=2412(bool underline,) # Move caret between paragraphs (delimited by empty lines) fun void ParaDown=2413(,) fun void ParaDownExtend=2414(,) fun void ParaUp=2415(,) fun void ParaUpExtend=2416(,) # Given a valid document position, return the previous position taking code # page into account. Returns 0 if passed 0. fun position PositionBefore=2417(position pos,) # Given a valid document position, return the next position taking code # page into account. Maximum value returned is the last position in the document. fun position PositionAfter=2418(position pos,) # Copy a range of text to the clipboard. Positions are clipped into the document. fun void CopyRange=2419(position start, position end) # Copy argument text to the clipboard. fun void CopyText=2420(int length, string text) # Start notifying the container of all key presses and commands. fun void StartRecord=3001(,) # Stop notifying the container of all key presses and commands. fun void StopRecord=3002(,) # Set the lexing language of the document. set void SetLexer=4001(int lexer,) # Retrieve the lexing language of the document. get int GetLexer=4002(,) # Colourise a segment of the document using the current lexing language. fun void Colourise=4003(position start, position end) # Set up a value that may be used by a lexer for some optional feature. set void SetProperty=4004(string key, string value) # Maximum value of keywordSet parameter of SetKeyWords. val KEYWORDSET_MAX=8 # Set up the key words used by the lexer. set void SetKeyWords=4005(int keywordSet, string keyWords) # Set the lexing language of the document based on string name. set void SetLexerLanguage=4006(, string language) # Load a lexer library (dll / so) fun void LoadLexerLibrary=4007(, string path) # Notifications # Type of modification and the action which caused the modification. # These are defined as a bit mask to make it easy to specify which notifications are wanted. # One bit is set from each of SC_MOD_* and SC_PERFORMED_*. enu ModificationFlags=SC_MOD_ SC_PERFORMED_ SC_LAST val SC_MOD_INSERTTEXT=0x1 val SC_MOD_DELETETEXT=0x2 val SC_MOD_CHANGESTYLE=0x4 val SC_MOD_CHANGEFOLD=0x8 val SC_PERFORMED_USER=0x10 val SC_PERFORMED_UNDO=0x20 val SC_PERFORMED_REDO=0x40 val SC_LASTSTEPINUNDOREDO=0x100 val SC_MOD_CHANGEMARKER=0x200 val SC_MOD_BEFOREINSERT=0x400 val SC_MOD_BEFOREDELETE=0x800 val SC_MODEVENTMASKALL=0xF77 # For compatibility, these go through the COMMAND notification rather than NOTIFY # and should have had exactly the same values as the EN_* constants. # Unfortunately the SETFOCUS and KILLFOCUS are flipped over from EN_* # As clients depend on these constants, this will not be changed. val SCEN_CHANGE=768 val SCEN_SETFOCUS=512 val SCEN_KILLFOCUS=256 # Symbolic key codes and modifier flags. # ASCII and other printable characters below 256. # Extended keys above 300. enu Keys=SCK_ val SCK_DOWN=300 val SCK_UP=301 val SCK_LEFT=302 val SCK_RIGHT=303 val SCK_HOME=304 val SCK_END=305 val SCK_PRIOR=306 val SCK_NEXT=307 val SCK_DELETE=308 val SCK_INSERT=309 val SCK_ESCAPE=7 val SCK_BACK=8 val SCK_TAB=9 val SCK_RETURN=13 val SCK_ADD=310 val SCK_SUBTRACT=311 val SCK_DIVIDE=312 enu KeyMod=SCMOD_ val SCMOD_SHIFT=1 val SCMOD_CTRL=2 val SCMOD_ALT=4 ################################################ # For SciLexer.h enu Lexer=SCLEX_ val SCLEX_CONTAINER=0 val SCLEX_NULL=1 val SCLEX_PYTHON=2 val SCLEX_CPP=3 val SCLEX_HTML=4 val SCLEX_XML=5 val SCLEX_PERL=6 val SCLEX_SQL=7 val SCLEX_VB=8 val SCLEX_PROPERTIES=9 val SCLEX_ERRORLIST=10 val SCLEX_MAKEFILE=11 val SCLEX_BATCH=12 val SCLEX_XCODE=13 val SCLEX_LATEX=14 val SCLEX_LUA=15 val SCLEX_DIFF=16 val SCLEX_CONF=17 val SCLEX_PASCAL=18 val SCLEX_AVE=19 val SCLEX_ADA=20 val SCLEX_LISP=21 val SCLEX_RUBY=22 val SCLEX_EIFFEL=23 val SCLEX_EIFFELKW=24 val SCLEX_TCL=25 val SCLEX_NNCRONTAB=26 val SCLEX_BULLANT=27 val SCLEX_VBSCRIPT=28 val SCLEX_ASP=29 val SCLEX_PHP=30 val SCLEX_BAAN=31 val SCLEX_MATLAB=32 val SCLEX_SCRIPTOL=33 val SCLEX_ASM=34 val SCLEX_CPPNOCASE=35 val SCLEX_FORTRAN=36 val SCLEX_F77=37 val SCLEX_CSS=38 val SCLEX_POV=39 val SCLEX_LOUT=40 val SCLEX_ESCRIPT=41 val SCLEX_PS=42 val SCLEX_NSIS=43 val SCLEX_MMIXAL=44 # When a lexer specifies its language as SCLEX_AUTOMATIC it receives a # value assigned in sequence from SCLEX_AUTOMATIC+1. val SCLEX_AUTOMATIC=1000 # Lexical states for SCLEX_PYTHON lex Python=SCLEX_PYTHON SCE_P_ lex Ruby=SCLEX_RUBY SCE_P_ val SCE_P_DEFAULT=0 val SCE_P_COMMENTLINE=1 val SCE_P_NUMBER=2 val SCE_P_STRING=3 val SCE_P_CHARACTER=4 val SCE_P_WORD=5 val SCE_P_TRIPLE=6 val SCE_P_TRIPLEDOUBLE=7 val SCE_P_CLASSNAME=8 val SCE_P_DEFNAME=9 val SCE_P_OPERATOR=10 val SCE_P_IDENTIFIER=11 val SCE_P_COMMENTBLOCK=12 val SCE_P_STRINGEOL=13 # Lexical states for SCLEX_CPP lex Cpp=SCLEX_CPP SCE_C_ lex SQL=SCLEX_SQL SCE_C_ lex Pascal=SCLEX_PASCAL SCE_C_ lex TCL=SCLEX_TCL SCE_C_ lex BullAnt=SCLEX_BULLANT SCE_C_ val SCE_C_DEFAULT=0 val SCE_C_COMMENT=1 val SCE_C_COMMENTLINE=2 val SCE_C_COMMENTDOC=3 val SCE_C_NUMBER=4 val SCE_C_WORD=5 val SCE_C_STRING=6 val SCE_C_CHARACTER=7 val SCE_C_UUID=8 val SCE_C_PREPROCESSOR=9 val SCE_C_OPERATOR=10 val SCE_C_IDENTIFIER=11 val SCE_C_STRINGEOL=12 val SCE_C_VERBATIM=13 val SCE_C_REGEX=14 val SCE_C_COMMENTLINEDOC=15 val SCE_C_WORD2=16 val SCE_C_COMMENTDOCKEYWORD=17 val SCE_C_COMMENTDOCKEYWORDERROR=18 val SCE_C_GLOBALCLASS=19 # Lexical states for SCLEX_HTML, SCLEX_XML lex HTML=SCLEX_HTML SCE_H lex XML=SCLEX_XML SCE_H lex ASP=SCLEX_ASP SCE_H lex PHP=SCLEX_PHP SCE_H val SCE_H_DEFAULT=0 val SCE_H_TAG=1 val SCE_H_TAGUNKNOWN=2 val SCE_H_ATTRIBUTE=3 val SCE_H_ATTRIBUTEUNKNOWN=4 val SCE_H_NUMBER=5 val SCE_H_DOUBLESTRING=6 val SCE_H_SINGLESTRING=7 val SCE_H_OTHER=8 val SCE_H_COMMENT=9 val SCE_H_ENTITY=10 # XML and ASP val SCE_H_TAGEND=11 val SCE_H_XMLSTART=12 val SCE_H_XMLEND=13 val SCE_H_SCRIPT=14 val SCE_H_ASP=15 val SCE_H_ASPAT=16 val SCE_H_CDATA=17 val SCE_H_QUESTION=18 # More HTML val SCE_H_VALUE=19 # X-Code val SCE_H_XCCOMMENT=20 # SGML val SCE_H_SGML_DEFAULT=21 val SCE_H_SGML_COMMAND=22 val SCE_H_SGML_1ST_PARAM=23 val SCE_H_SGML_DOUBLESTRING=24 val SCE_H_SGML_SIMPLESTRING=25 val SCE_H_SGML_ERROR=26 val SCE_H_SGML_SPECIAL=27 val SCE_H_SGML_ENTITY=28 val SCE_H_SGML_COMMENT=29 val SCE_H_SGML_1ST_PARAM_COMMENT=30 val SCE_H_SGML_BLOCK_DEFAULT=31 # Embedded Javascript val SCE_HJ_START=40 val SCE_HJ_DEFAULT=41 val SCE_HJ_COMMENT=42 val SCE_HJ_COMMENTLINE=43 val SCE_HJ_COMMENTDOC=44 val SCE_HJ_NUMBER=45 val SCE_HJ_WORD=46 val SCE_HJ_KEYWORD=47 val SCE_HJ_DOUBLESTRING=48 val SCE_HJ_SINGLESTRING=49 val SCE_HJ_SYMBOLS=50 val SCE_HJ_STRINGEOL=51 val SCE_HJ_REGEX=52 # ASP Javascript val SCE_HJA_START=55 val SCE_HJA_DEFAULT=56 val SCE_HJA_COMMENT=57 val SCE_HJA_COMMENTLINE=58 val SCE_HJA_COMMENTDOC=59 val SCE_HJA_NUMBER=60 val SCE_HJA_WORD=61 val SCE_HJA_KEYWORD=62 val SCE_HJA_DOUBLESTRING=63 val SCE_HJA_SINGLESTRING=64 val SCE_HJA_SYMBOLS=65 val SCE_HJA_STRINGEOL=66 val SCE_HJA_REGEX=67 # Embedded VBScript val SCE_HB_START=70 val SCE_HB_DEFAULT=71 val SCE_HB_COMMENTLINE=72 val SCE_HB_NUMBER=73 val SCE_HB_WORD=74 val SCE_HB_STRING=75 val SCE_HB_IDENTIFIER=76 val SCE_HB_STRINGEOL=77 # ASP VBScript val SCE_HBA_START=80 val SCE_HBA_DEFAULT=81 val SCE_HBA_COMMENTLINE=82 val SCE_HBA_NUMBER=83 val SCE_HBA_WORD=84 val SCE_HBA_STRING=85 val SCE_HBA_IDENTIFIER=86 val SCE_HBA_STRINGEOL=87 # Embedded Python val SCE_HP_START=90 val SCE_HP_DEFAULT=91 val SCE_HP_COMMENTLINE=92 val SCE_HP_NUMBER=93 val SCE_HP_STRING=94 val SCE_HP_CHARACTER=95 val SCE_HP_WORD=96 val SCE_HP_TRIPLE=97 val SCE_HP_TRIPLEDOUBLE=98 val SCE_HP_CLASSNAME=99 val SCE_HP_DEFNAME=100 val SCE_HP_OPERATOR=101 val SCE_HP_IDENTIFIER=102 # ASP Python val SCE_HPA_START=105 val SCE_HPA_DEFAULT=106 val SCE_HPA_COMMENTLINE=107 val SCE_HPA_NUMBER=108 val SCE_HPA_STRING=109 val SCE_HPA_CHARACTER=110 val SCE_HPA_WORD=111 val SCE_HPA_TRIPLE=112 val SCE_HPA_TRIPLEDOUBLE=113 val SCE_HPA_CLASSNAME=114 val SCE_HPA_DEFNAME=115 val SCE_HPA_OPERATOR=116 val SCE_HPA_IDENTIFIER=117 # PHP val SCE_HPHP_DEFAULT=118 val SCE_HPHP_HSTRING=119 val SCE_HPHP_SIMPLESTRING=120 val SCE_HPHP_WORD=121 val SCE_HPHP_NUMBER=122 val SCE_HPHP_VARIABLE=123 val SCE_HPHP_COMMENT=124 val SCE_HPHP_COMMENTLINE=125 val SCE_HPHP_HSTRING_VARIABLE=126 val SCE_HPHP_OPERATOR=127 # Lexical states for SCLEX_PERL lex Perl=SCLEX_PERL SCE_PL_ val SCE_PL_DEFAULT=0 val SCE_PL_ERROR=1 val SCE_PL_COMMENTLINE=2 val SCE_PL_POD=3 val SCE_PL_NUMBER=4 val SCE_PL_WORD=5 val SCE_PL_STRING=6 val SCE_PL_CHARACTER=7 val SCE_PL_PUNCTUATION=8 val SCE_PL_PREPROCESSOR=9 val SCE_PL_OPERATOR=10 val SCE_PL_IDENTIFIER=11 val SCE_PL_SCALAR=12 val SCE_PL_ARRAY=13 val SCE_PL_HASH=14 val SCE_PL_SYMBOLTABLE=15 val SCE_PL_REGEX=17 val SCE_PL_REGSUBST=18 val SCE_PL_LONGQUOTE=19 val SCE_PL_BACKTICKS=20 val SCE_PL_DATASECTION=21 val SCE_PL_HERE_DELIM=22 val SCE_PL_HERE_Q=23 val SCE_PL_HERE_QQ=24 val SCE_PL_HERE_QX=25 val SCE_PL_STRING_Q=26 val SCE_PL_STRING_QQ=27 val SCE_PL_STRING_QX=28 val SCE_PL_STRING_QR=29 val SCE_PL_STRING_QW=30 # Lexical states for SCLEX_VB, SCLEX_VBSCRIPT lex VB=SCLEX_VB SCE_B_ lex VBScript=SCLEX_VBSCRIPT SCE_B_ val SCE_B_DEFAULT=0 val SCE_B_COMMENT=1 val SCE_B_NUMBER=2 val SCE_B_KEYWORD=3 val SCE_B_STRING=4 val SCE_B_PREPROCESSOR=5 val SCE_B_OPERATOR=6 val SCE_B_IDENTIFIER=7 val SCE_B_DATE=8 # Lexical states for SCLEX_PROPERTIES lex Properties=SCLEX_PROPERTIES SCE_PROPS_ val SCE_PROPS_DEFAULT=0 val SCE_PROPS_COMMENT=1 val SCE_PROPS_SECTION=2 val SCE_PROPS_ASSIGNMENT=3 val SCE_PROPS_DEFVAL=4 # Lexical states for SCLEX_LATEX lex LaTeX=SCLEX_LATEX SCE_L_ val SCE_L_DEFAULT=0 val SCE_L_COMMAND=1 val SCE_L_TAG=2 val SCE_L_MATH=3 val SCE_L_COMMENT=4 # Lexical states for SCLEX_LUA lex Lua=SCLEX_LUA SCE_LUA_ val SCE_LUA_DEFAULT=0 val SCE_LUA_COMMENT=1 val SCE_LUA_COMMENTLINE=2 val SCE_LUA_COMMENTDOC=3 val SCE_LUA_NUMBER=4 val SCE_LUA_WORD=5 val SCE_LUA_STRING=6 val SCE_LUA_CHARACTER=7 val SCE_LUA_LITERALSTRING=8 val SCE_LUA_PREPROCESSOR=9 val SCE_LUA_OPERATOR=10 val SCE_LUA_IDENTIFIER=11 val SCE_LUA_STRINGEOL=12 val SCE_LUA_WORD2=13 val SCE_LUA_WORD3=14 val SCE_LUA_WORD4=15 val SCE_LUA_WORD5=16 val SCE_LUA_WORD6=17 val SCE_LUA_WORD7=18 val SCE_LUA_WORD8=19 # Lexical states for SCLEX_ERRORLIST lex ErrorList=SCLEX_ERRORLIST SCE_ERR_ val SCE_ERR_DEFAULT=0 val SCE_ERR_PYTHON=1 val SCE_ERR_GCC=2 val SCE_ERR_MS=3 val SCE_ERR_CMD=4 val SCE_ERR_BORLAND=5 val SCE_ERR_PERL=6 val SCE_ERR_NET=7 val SCE_ERR_LUA=8 val SCE_ERR_CTAG=9 val SCE_ERR_DIFF_CHANGED=10 val SCE_ERR_DIFF_ADDITION=11 val SCE_ERR_DIFF_DELETION=12 val SCE_ERR_DIFF_MESSAGE=13 val SCE_ERR_PHP=14 val SCE_ERR_ELF=15 val SCE_ERR_IFC=16 # Lexical states for SCLEX_BATCH lex Batch=SCLEX_BATCH SCE_BAT_ val SCE_BAT_DEFAULT=0 val SCE_BAT_COMMENT=1 val SCE_BAT_WORD=2 val SCE_BAT_LABEL=3 val SCE_BAT_HIDE=4 val SCE_BAT_COMMAND=5 val SCE_BAT_IDENTIFIER=6 val SCE_BAT_OPERATOR=7 # Lexical states for SCLEX_MAKEFILE lex MakeFile=SCLEX_MAKEFILE SCE_MAKE_ val SCE_MAKE_DEFAULT=0 val SCE_MAKE_COMMENT=1 val SCE_MAKE_PREPROCESSOR=2 val SCE_MAKE_IDENTIFIER=3 val SCE_MAKE_OPERATOR=4 val SCE_MAKE_TARGET=5 val SCE_MAKE_IDEOL=9 # Lexical states for SCLEX_DIFF lex Diff=SCLEX_DIFF SCE_DIFF_ val SCE_DIFF_DEFAULT=0 val SCE_DIFF_COMMENT=1 val SCE_DIFF_COMMAND=2 val SCE_DIFF_HEADER=3 val SCE_DIFF_POSITION=4 val SCE_DIFF_DELETED=5 val SCE_DIFF_ADDED=6 # Lexical states for SCLEX_CONF (Apache Configuration Files Lexer) lex Conf=SCLEX_CONF SCE_CONF_ val SCE_CONF_DEFAULT=0 val SCE_CONF_COMMENT=1 val SCE_CONF_NUMBER=2 val SCE_CONF_IDENTIFIER=3 val SCE_CONF_EXTENSION=4 val SCE_CONF_PARAMETER=5 val SCE_CONF_STRING=6 val SCE_CONF_OPERATOR=7 val SCE_CONF_IP=8 val SCE_CONF_DIRECTIVE=9 # Lexical states for SCLEX_AVE, Avenue lex Avenue=SCLEX_AVE SCE_AVE_ val SCE_AVE_DEFAULT=0 val SCE_AVE_COMMENT=1 val SCE_AVE_NUMBER=2 val SCE_AVE_WORD=3 val SCE_AVE_STRING=6 val SCE_AVE_ENUM=7 val SCE_AVE_STRINGEOL=8 val SCE_AVE_IDENTIFIER=9 val SCE_AVE_OPERATOR=10 val SCE_AVE_WORD1=11 val SCE_AVE_WORD2=12 val SCE_AVE_WORD3=13 val SCE_AVE_WORD4=14 val SCE_AVE_WORD5=15 val SCE_AVE_WORD6=16 # Lexical states for SCLEX_ADA lex Ada=SCLEX_ADA SCE_ADA_ val SCE_ADA_DEFAULT=0 val SCE_ADA_WORD=1 val SCE_ADA_IDENTIFIER=2 val SCE_ADA_NUMBER=3 val SCE_ADA_DELIMITER=4 val SCE_ADA_CHARACTER=5 val SCE_ADA_CHARACTEREOL=6 val SCE_ADA_STRING=7 val SCE_ADA_STRINGEOL=8 val SCE_ADA_LABEL=9 val SCE_ADA_COMMENTLINE=10 val SCE_ADA_ILLEGAL=11 # Lexical states for SCLEX_BAAN lex Baan=SCLEX_BAAN SCE_BAAN_ val SCE_BAAN_DEFAULT=0 val SCE_BAAN_COMMENT=1 val SCE_BAAN_COMMENTDOC=2 val SCE_BAAN_NUMBER=3 val SCE_BAAN_WORD=4 val SCE_BAAN_STRING=5 val SCE_BAAN_PREPROCESSOR=6 val SCE_BAAN_OPERATOR=7 val SCE_BAAN_IDENTIFIER=8 val SCE_BAAN_STRINGEOL=9 val SCE_BAAN_WORD2=10 # Lexical states for SCLEX_LISP lex Lisp=SCLEX_LISP SCE_LISP_ val SCE_LISP_DEFAULT=0 val SCE_LISP_COMMENT=1 val SCE_LISP_NUMBER=2 val SCE_LISP_KEYWORD=3 val SCE_LISP_STRING=6 val SCE_LISP_STRINGEOL=8 val SCE_LISP_IDENTIFIER=9 val SCE_LISP_OPERATOR=10 # Lexical states for SCLEX_EIFFEL and SCLEX_EIFFELKW lex Eiffel=SCLEX_EIFFEL SCE_EIFFEL_ lex EiffelKW=SCLEX_EIFFELKW SCE_EIFFEL_ val SCE_EIFFEL_DEFAULT=0 val SCE_EIFFEL_COMMENTLINE=1 val SCE_EIFFEL_NUMBER=2 val SCE_EIFFEL_WORD=3 val SCE_EIFFEL_STRING=4 val SCE_EIFFEL_CHARACTER=5 val SCE_EIFFEL_OPERATOR=6 val SCE_EIFFEL_IDENTIFIER=7 val SCE_EIFFEL_STRINGEOL=8 # Lexical states for SCLEX_NNCRONTAB (nnCron crontab Lexer) lex NNCronTab=SCLEX_NNCRONTAB SCE_NNCRONTAB_ val SCE_NNCRONTAB_DEFAULT=0 val SCE_NNCRONTAB_COMMENT=1 val SCE_NNCRONTAB_TASK=2 val SCE_NNCRONTAB_SECTION=3 val SCE_NNCRONTAB_KEYWORD=4 val SCE_NNCRONTAB_MODIFIER=5 val SCE_NNCRONTAB_ASTERISK=6 val SCE_NNCRONTAB_NUMBER=7 val SCE_NNCRONTAB_STRING=8 val SCE_NNCRONTAB_ENVIRONMENT=9 val SCE_NNCRONTAB_IDENTIFIER=10 # Lexical states for SCLEX_MATLAB lex MatLab=SCLEX_MATLAB SCE_MATLAB_ val SCE_MATLAB_DEFAULT=0 val SCE_MATLAB_COMMENT=1 val SCE_MATLAB_COMMAND=2 val SCE_MATLAB_NUMBER=3 val SCE_MATLAB_KEYWORD=4 val SCE_MATLAB_STRING=5 val SCE_MATLAB_OPERATOR=6 val SCE_MATLAB_IDENTIFIER=7 # Lexical states for SCLEX_SCRIPTOL lex Sol=SCLEX_SCRIPTOL SCE_SCRIPTOL_ val SCE_SCRIPTOL_DEFAULT=0 val SCE_SCRIPTOL_COMMENT=1 val SCE_SCRIPTOL_COMMENTLINE=2 val SCE_SCRIPTOL_COMMENTDOC=3 val SCE_SCRIPTOL_NUMBER=4 val SCE_SCRIPTOL_WORD=5 val SCE_SCRIPTOL_STRING=6 val SCE_SCRIPTOL_CHARACTER=7 val SCE_SCRIPTOL_UUID=8 val SCE_SCRIPTOL_PREPROCESSOR=9 val SCE_SCRIPTOL_OPERATOR=10 val SCE_SCRIPTOL_IDENTIFIER=11 val SCE_SCRIPTOL_STRINGEOL=12 val SCE_SCRIPTOL_VERBATIM=13 val SCE_SCRIPTOL_REGEX=14 val SCE_SCRIPTOL_COMMENTLINEDOC=15 val SCE_SCRIPTOL_WORD2=16 val SCE_SCRIPTOL_COMMENTDOCKEYWORD=17 val SCE_SCRIPTOL_COMMENTDOCKEYWORDERROR=18 val SCE_SCRIPTOL_COMMENTBASIC=19 # Lexical states for SCLEX_ASM lex Asm=SCLEX_ASM SCE_ASM_ val SCE_ASM_DEFAULT=0 val SCE_ASM_COMMENT=1 val SCE_ASM_NUMBER=2 val SCE_ASM_STRING=3 val SCE_ASM_OPERATOR=4 val SCE_ASM_IDENTIFIER=5 val SCE_ASM_CPUINSTRUCTION=6 val SCE_ASM_MATHINSTRUCTION=7 val SCE_ASM_REGISTER=8 val SCE_ASM_DIRECTIVE=9 val SCE_ASM_DIRECTIVEOPERAND=10 # Lexical states for SCLEX_FORTRAN lex Fortran=SCLEX_FORTRAN SCE_F_ lex F77=SCLEX_F77 SCE_F_ val SCE_F_DEFAULT=0 val SCE_F_COMMENT=1 val SCE_F_NUMBER=2 val SCE_F_STRING1=3 val SCE_F_STRING2=4 val SCE_F_STRINGEOL=5 val SCE_F_OPERATOR=6 val SCE_F_IDENTIFIER=7 val SCE_F_WORD=8 val SCE_F_WORD2=9 val SCE_F_WORD3=10 val SCE_F_PREPROCESSOR=11 val SCE_F_OPERATOR2=12 val SCE_F_LABEL=13 val SCE_F_CONTINUATION=14 # Lexical states for SCLEX_CSS lex CSS=SCLEX_CSS SCE_CSS_ val SCE_CSS_DEFAULT=0 val SCE_CSS_TAG=1 val SCE_CSS_CLASS=2 val SCE_CSS_PSEUDOCLASS=3 val SCE_CSS_UNKNOWN_PSEUDOCLASS=4 val SCE_CSS_OPERATOR=5 val SCE_CSS_IDENTIFIER=6 val SCE_CSS_UNKNOWN_IDENTIFIER=7 val SCE_CSS_VALUE=8 val SCE_CSS_COMMENT=9 val SCE_CSS_ID=10 val SCE_CSS_IMPORTANT=11 val SCE_CSS_DIRECTIVE=12 val SCE_CSS_DOUBLESTRING=13 val SCE_CSS_SINGLESTRING=14 # Lexical states for SCLEX_POV lex POV=SCLEX_POV SCE_POV_ val SCE_POV_DEFAULT=0 val SCE_POV_COMMENT=1 val SCE_POV_COMMENTLINE=2 val SCE_POV_NUMBER=3 val SCE_POV_OPERATOR=4 val SCE_POV_IDENTIFIER=5 val SCE_POV_STRING=6 val SCE_POV_STRINGEOL=7 val SCE_POV_DIRECTIVE=8 val SCE_POV_BADDIRECTIVE=9 val SCE_POV_WORD2=10 val SCE_POV_WORD3=11 val SCE_POV_WORD4=12 val SCE_POV_WORD5=13 val SCE_POV_WORD6=14 val SCE_POV_WORD7=15 val SCE_POV_WORD8=16 # Lexical states for SCLEX_LOUT lex LOUT=SCLEX_LOUT SCE_LOUT_ val SCE_LOUT_DEFAULT=0 val SCE_LOUT_COMMENT=1 val SCE_LOUT_NUMBER=2 val SCE_LOUT_WORD=3 val SCE_LOUT_WORD2=4 val SCE_LOUT_WORD3=5 val SCE_LOUT_WORD4=6 val SCE_LOUT_STRING=7 val SCE_LOUT_OPERATOR=8 val SCE_LOUT_IDENTIFIER=9 val SCE_LOUT_STRINGEOL=10 # Lexical states for SCLEX_ESCRIPT lex ESCRIPT=SCLEX_ESCRIPT SCE_ESCRIPT_ val SCE_ESCRIPT_DEFAULT=0 val SCE_ESCRIPT_COMMENT=1 val SCE_ESCRIPT_COMMENTLINE=2 val SCE_ESCRIPT_COMMENTDOC=3 val SCE_ESCRIPT_NUMBER=4 val SCE_ESCRIPT_WORD=5 val SCE_ESCRIPT_STRING=6 val SCE_ESCRIPT_OPERATOR=7 val SCE_ESCRIPT_IDENTIFIER=8 val SCE_ESCRIPT_BRACE=9 val SCE_ESCRIPT_WORD2=10 val SCE_ESCRIPT_WORD3=11 # Lexical states for SCLEX_PS lex PS=SCLEX_PS SCE_PS_ val SCE_PS_DEFAULT=0 val SCE_PS_COMMENT=1 val SCE_PS_DSC_COMMENT=2 val SCE_PS_DSC_VALUE=3 val SCE_PS_NUMBER=4 val SCE_PS_NAME=5 val SCE_PS_KEYWORD=6 val SCE_PS_LITERAL=7 val SCE_PS_IMMEVAL=8 val SCE_PS_PAREN_ARRAY=9 val SCE_PS_PAREN_DICT=10 val SCE_PS_PAREN_PROC=11 val SCE_PS_TEXT=12 val SCE_PS_HEXSTRING=13 val SCE_PS_BASE85STRING=14 val SCE_PS_BADSTRINGCHAR=15 # Lexical states for SCLEX_NSIS lex NSIS=SCLEX_NSIS SCE_NSIS_ val SCE_NSIS_DEFAULT=0 val SCE_NSIS_COMMENT=1 val SCE_NSIS_STRINGDQ=2 val SCE_NSIS_STRINGLQ=3 val SCE_NSIS_STRINGRQ=4 val SCE_NSIS_FUNCTION=5 val SCE_NSIS_VARIABLE=6 val SCE_NSIS_LABEL=7 val SCE_NSIS_USERDEFINED=8 val SCE_NSIS_SECTIONDEF=9 val SCE_NSIS_SUBSECTIONDEF=10 val SCE_NSIS_IFDEFINEDEF=11 val SCE_NSIS_MACRODEF=12 val SCE_NSIS_STRINGVAR=13 # Lexical states for SCLEX_MMIXAL lex MMIXAL=SCLEX_MMIXAL SCE_MMIXAL_ val SCE_MMIXAL_LEADWS=0 val SCE_MMIXAL_COMMENT=1 val SCE_MMIXAL_LABEL=2 val SCE_MMIXAL_OPCODE=3 val SCE_MMIXAL_OPCODE_PRE=4 val SCE_MMIXAL_OPCODE_VALID=5 val SCE_MMIXAL_OPCODE_UNKNOWN=6 val SCE_MMIXAL_OPCODE_POST=7 val SCE_MMIXAL_OPERANDS=8 val SCE_MMIXAL_NUMBER=9 val SCE_MMIXAL_REF=10 val SCE_MMIXAL_CHAR=11 val SCE_MMIXAL_STRING=12 val SCE_MMIXAL_REGISTER=13 val SCE_MMIXAL_HEX=14 val SCE_MMIXAL_OPERATOR=15 val SCE_MMIXAL_SYMBOL=16 val SCE_MMIXAL_INCLUDE=17 # Events evt void StyleNeeded=2000(int position) evt void CharAdded=2001(int ch) evt void SavePointReached=2002(void) evt void SavePointLeft=2003(void) evt void ModifyAttemptRO=2004(void) # GTK+ Specific to work around focus and accelerator problems: evt void Key=2005(int ch, int modifiers) evt void DoubleClick=2006(void) evt void UpdateUI=2007(void) evt void Modified=2008(int position, int modificationType, string text, int length, int linesAdded, int line, int foldLevelNow, int foldLevelPrev) evt void MacroRecord=2009(int message, int wParam, int lParam) evt void MarginClick=2010(int modifiers, int position, int margin) evt void NeedShown=2011(int position, int length) evt void Painted=2013(void) evt void UserListSelection=2014(int listType, string text) evt void URIDropped=2015(string text) evt void DwellStart=2016(int position) evt void DwellEnd=2017(int position) evt void Zoom=2018(void) evt void HotSpotClick=2019(int modifiers, int position) evt void HotSpotDoubleClick=2020(int modifiers, int position) evt void CallTipClick=2021(int position) cat Deprecated # CARET_POLICY changed in 1.47 fun void SetCaretPolicy=2369(int caretPolicy, int caretSlop) val CARET_CENTER=0x02 val CARET_XEVEN=0x08 val CARET_XJUMPS=0x10 # The old name for SCN_UPDATEUI val SCN_CHECKBRACE=2007 evt void PosChanged=2012(int position)