utils/wxPython/src/Makefile.pre.in

   1 # Universal Unix Makefile for Python extensions
   2 # =============================================
   3
   4 # Short Instructions
   5 # ------------------
   6
   7 # 1. Build and install Python (1.5 or newer).
   8 # 2. "make -f Makefile.pre.in boot"
   9 # 3. "make"
  10 # You should now have a shared library.
  11
  12 # Long Instructions
  13 # -----------------
  14
  15 # Build *and install* the basic Python 1.5 distribution.  See the
  16 # Python README for instructions.  (This version of Makefile.pre.in
  17 # only withs with Python 1.5, alpha 3 or newer.)
  18
  19 # Create a file Setup.in for your extension.  This file follows the
  20 # format of the Modules/Setup.in file; see the instructions there.
  21 # For a simple module called "spam" on file "spammodule.c", it can
  22 # contain a single line:
  23 #   spam spammodule.c
  24 # You can build as many modules as you want in the same directory --
  25 # just have a separate line for each of them in the Setup.in file.
  26
  27 # If you want to build your extension as a shared library, insert a
  28 # line containing just the string
  29 #   *shared*
  30 # at the top of your Setup.in file.
  31
  32 # Note that the build process copies Setup.in to Setup, and then works
  33 # with Setup.  It doesn't overwrite Setup when Setup.in is changed, so
  34 # while you're in the process of debugging your Setup.in file, you may
  35 # want to edit Setup instead, and copy it back to Setup.in later.
  36 # (All this is done so you can distribute your extension easily and
  37 # someone else can select the modules they actually want to build by
  38 # commenting out lines in the Setup file, without editing the
  39 # original.  Editing Setup is also used to specify nonstandard
  40 # locations for include or library files.)
  41
  42 # Copy this file (Misc/Makefile.pre.in) to the directory containing
  43 # your extension.
  44
  45 # Run "make -f Makefile.pre.in boot".  This creates Makefile
  46 # (producing Makefile.pre and sedscript as intermediate files) and
  47 # config.c, incorporating the values for sys.prefix, sys.exec_prefix
  48 # and sys.version from the installed Python binary.  For this to work,
  49 # the python binary must be on your path.  If this fails, try
  50 #   make -f Makefile.pre.in Makefile VERSION=1.5 installdir=<prefix>
  51 # where <prefix> is the prefix used to install Python for installdir
  52 # (and possibly similar for exec_installdir=<exec_prefix>).
  53
  54 # Note: "make boot" implies "make clobber" -- it assumes that when you
  55 # bootstrap you may have changed platforms so it removes all previous
  56 # output files.
  57
  58 # If you are building your extension as a shared library (your
  59 # Setup.in file starts with *shared*), run "make" or "make sharedmods"
  60 # to build the shared library files.  If you are building a statically
  61 # linked Python binary (the only solution of your platform doesn't
  62 # support shared libraries, and sometimes handy if you want to
  63 # distribute or install the resulting Python binary), run "make
  64 # python".
  65
  66 # Note: Each time you edit Makefile.pre.in or Setup, you must run
  67 # "make Makefile" before running "make".
  68
  69 # Hint: if you want to use VPATH, you can start in an empty
  70 # subdirectory and say (e.g.):
  71 #   make -f ../Makefile.pre.in boot srcdir=.. VPATH=..
  72
  73
  74 # === Bootstrap variables (edited through "make boot") ===
  75
  76 # The prefix used by "make inclinstall libainstall" of core python
  77 installdir=     /usr/local
  78
  79 # The exec_prefix used by the same
  80 exec_installdir=$(installdir)
  81
  82 # Source directory and VPATH in case you want to use VPATH.
  83 # (You will have to edit these two lines yourself -- there is no
  84 # automatic support as the Makefile is not generated by
  85 # config.status.)
  86 srcdir=         .
  87 VPATH=          .
  88
  89 # === Variables that you may want to customize (rarely) ===
  90
  91 # (Static) build target
  92 TARGET=         python
  93
  94 # Installed python binary (used only by boot target)
  95 PYTHON=         python
  96
  97 # Add more -I and -D options here
  98 CFLAGS=         $(OPT) -I$(INCLUDEPY) -I$(EXECINCLUDEPY) $(DEFS)
  99
 100 # These two variables can be set in Setup to merge extensions.
 101 # See example[23].
 102 BASELIB=
 103 BASESETUP=
 104
 105 # === Variables set by makesetup ===
 106
 107 MODOBJS=        _MODOBJS_
 108 MODLIBS=        _MODLIBS_
 109
 110 # === Definitions added by makesetup ===
 111
 112 # === Variables from configure (through sedscript) ===
 113
 114 VERSION=        @VERSION@
 115 CC=             @CC@
 116 LINKCC=         @LINKCC@
 117 SGI_ABI=        @SGI_ABI@
 118 OPT=            @OPT@
 119 LDFLAGS=        @LDFLAGS@
 120 LDLAST=         @LDLAST@
 121 DEFS=           @DEFS@
 122 LIBS=           @LIBS@
 123 LIBM=           @LIBM@
 124 LIBC=           @LIBC@
 125 RANLIB=         @RANLIB@
 126 MACHDEP=        @MACHDEP@
 127 SO=             @SO@
 128 LDSHARED=       @LDSHARED@
 129 CCSHARED=       @CCSHARED@
 130 LINKFORSHARED=  @LINKFORSHARED@
 131 #@SET_CCC@
 132
 133 # Install prefix for architecture-independent files
 134 prefix=         /usr/local
 135
 136 # Install prefix for architecture-dependent files
 137 exec_prefix=    $(prefix)
 138
 139 # === Fixed definitions ===
 140
 141 # Shell used by make (some versions default to the login shell, which is bad)
 142 SHELL=          /bin/sh
 143
 144 # Expanded directories
 145 BINDIR=         $(exec_installdir)/bin
 146 LIBDIR=         $(exec_prefix)/lib
 147 MANDIR=         $(installdir)/man
 148 INCLUDEDIR=     $(installdir)/include
 149 SCRIPTDIR=      $(prefix)/lib
 150
 151 # Detailed destination directories
 152 BINLIBDEST=     $(LIBDIR)/python$(VERSION)
 153 LIBDEST=        $(SCRIPTDIR)/python$(VERSION)
 154 INCLUDEPY=      $(INCLUDEDIR)/python$(VERSION)
 155 EXECINCLUDEPY=  $(exec_installdir)/include/python$(VERSION)
 156 LIBP=           $(exec_installdir)/lib/python$(VERSION)
 157 DESTSHARED=     $(BINLIBDEST)/site-packages
 158
 159 LIBPL=          $(LIBP)/config
 160
 161 PYTHONLIBS=     $(LIBPL)/libpython$(VERSION).a
 162
 163 MAKESETUP=      $(LIBPL)/makesetup
 164 MAKEFILE=       $(LIBPL)/Makefile
 165 CONFIGC=        $(LIBPL)/config.c
 166 CONFIGCIN=      $(LIBPL)/config.c.in
 167 SETUP=          $(LIBPL)/Setup
 168
 169 SYSLIBS=        $(LIBM) $(LIBC)
 170
 171 ADDOBJS=        $(LIBPL)/python.o config.o
 172
 173 # Portable install script (configure doesn't always guess right)
 174 INSTALL=        $(LIBPL)/install-sh -c
 175 # Shared libraries must be installed with executable mode on some systems;
 176 # rather than figuring out exactly which, we always give them executable mode.
 177 # Also, making them read-only seems to be a good idea...
 178 INSTALL_SHARED= ${INSTALL} -m 555
 179
 180 #---------------------------------------------------
 181 # Possibly change some definintions for C++
 182 ifdef MY_LDSHARED
 183 LDSHARED=$(MY_LDSHARED)
 184 endif
 185 ifdef MY_LINKCC
 186 LINKCC=$(MY_LINKCC)
 187 endif
 188
 189
 190 # === Fixed rules ===
 191
 192 # Default target.  This builds shared libraries only
 193 default:        sharedmods
 194
 195 # Build everything
 196 all:            static sharedmods
 197
 198 # Build shared libraries from our extension modules
 199 sharedmods:     $(SHAREDMODS)
 200
 201 # Build a static Python binary containing our extension modules
 202 static:         $(TARGET)
 203 $(TARGET):      $(ADDOBJS) lib.a $(PYTHONLIBS) Makefile $(BASELIB)
 204                 $(LINKCC) $(LDFLAGS) $(LINKFORSHARED) \
 205                  $(ADDOBJS) lib.a $(PYTHONLIBS) \
 206                  $(LINKPATH) $(BASELIB) $(MODLIBS) $(LIBS) $(SYSLIBS) \
 207                  -o $(TARGET) $(LDLAST)
 208
 209 #------------------------------------------------------------------------
 210 #------------------------------------------------------------------------
 211 # This is a default version of the install target for wxPython.  It just
 212 # redirects to wxInstall below...
 213
 214 install:        wxInstall
 215
 216 #install:       sharedmods
 217 #               if test ! -d $(DESTSHARED) ; then \
 218 #                       mkdir $(DESTSHARED) ; else true ; fi
 219 #               -for i in X $(SHAREDMODS); do \
 220 #                       if test $$i != X; \
 221 #                       then $(INSTALL_SHARED) $$i $(DESTSHARED)/$$i; \
 222 #                       fi; \
 223 #               done
 224
 225
 226 # Build the library containing our extension modules
 227 lib.a:          $(MODOBJS)
 228                 -rm -f lib.a
 229                 ar cr lib.a $(MODOBJS)
 230                 -$(RANLIB) lib.a
 231
 232 # This runs makesetup *twice* to use the BASESETUP definition from Setup
 233 config.c Makefile:      Makefile.pre Setup $(BASESETUP) $(MAKESETUP)
 234                 $(MAKESETUP) \
 235                  -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
 236                 $(MAKE) -f Makefile do-it-again
 237
 238 # Internal target to run makesetup for the second time
 239 do-it-again:
 240                 $(MAKESETUP) \
 241                  -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
 242
 243 # Make config.o from the config.c created by makesetup
 244 config.o:       config.c
 245                 $(CC) $(CFLAGS) -c config.c
 246
 247 # Setup is copied from Setup.in *only* if it doesn't yet exist
 248 Setup:
 249                 cp Setup.in Setup
 250
 251 # Make the intermediate Makefile.pre from Makefile.pre.in
 252 Makefile.pre: Makefile.pre.in sedscript
 253                 sed -f sedscript Makefile.pre.in >Makefile.pre
 254
 255 # Shortcuts to make the sed arguments on one line
 256 P=prefix
 257 E=exec_prefix
 258 H=Generated automatically from Makefile.pre.in by sedscript.
 259 L=LINKFORSHARED
 260
 261 # Make the sed script used to create Makefile.pre from Makefile.pre.in
 262 sedscript:      $(MAKEFILE)
 263         sed -n \
 264          -e '1s/.*/1i\\/p' \
 265          -e '2s%.*%# $H%p' \
 266          -e '/^VERSION=/s/^VERSION=[    ]*\(.*\)/s%@VERSION[@]%\1%/p' \
 267          -e '/^CC=/s/^CC=[      ]*\(.*\)/s%@CC[@]%\1%/p' \
 268          -e '/^CCC=/s/^CCC=[    ]*\(.*\)/s%#@SET_CCC[@]%CCC=\1%/p' \
 269          -e '/^LINKCC=/s/^LINKCC=[      ]*\(.*\)/s%@LINKCC[@]%\1%/p' \
 270          -e '/^OPT=/s/^OPT=[    ]*\(.*\)/s%@OPT[@]%\1%/p' \
 271          -e '/^LDFLAGS=/s/^LDFLAGS=[    ]*\(.*\)/s%@LDFLAGS[@]%\1%/p' \
 272          -e '/^DEFS=/s/^DEFS=[  ]*\(.*\)/s%@DEFS[@]%\1%/p' \
 273          -e '/^LIBS=/s/^LIBS=[  ]*\(.*\)/s%@LIBS[@]%\1%/p' \
 274          -e '/^LIBM=/s/^LIBM=[  ]*\(.*\)/s%@LIBM[@]%\1%/p' \
 275          -e '/^LIBC=/s/^LIBC=[  ]*\(.*\)/s%@LIBC[@]%\1%/p' \
 276          -e '/^RANLIB=/s/^RANLIB=[      ]*\(.*\)/s%@RANLIB[@]%\1%/p' \
 277          -e '/^MACHDEP=/s/^MACHDEP=[    ]*\(.*\)/s%@MACHDEP[@]%\1%/p' \
 278          -e '/^SO=/s/^SO=[      ]*\(.*\)/s%@SO[@]%\1%/p' \
 279          -e '/^LDSHARED=/s/^LDSHARED=[  ]*\(.*\)/s%@LDSHARED[@]%\1%/p' \
 280          -e '/^CCSHARED=/s/^CCSHARED=[  ]*\(.*\)/s%@CCSHARED[@]%\1%/p' \
 281          -e '/^$L=/s/^$L=[      ]*\(.*\)/s%@$L[@]%\1%/p' \
 282          -e '/^$P=/s/^$P=\(.*\)/s%^$P=.*%$P=\1%/p' \
 283          -e '/^$E=/s/^$E=\(.*\)/s%^$E=.*%$E=\1%/p' \
 284          $(MAKEFILE) >sedscript
 285         echo "/^#@SET_CCC@/d" >>sedscript
 286         echo "/^installdir=/s%=.*%=     $(installdir)%" >>sedscript
 287         echo "/^exec_installdir=/s%=.*%=$(exec_installdir)%" >>sedscript
 288         echo "/^srcdir=/s%=.*%=         $(srcdir)%" >>sedscript
 289         echo "/^VPATH=/s%=.*%=          $(VPATH)%" >>sedscript
 290         echo "/^LINKPATH=/s%=.*%=       $(LINKPATH)%" >>sedscript
 291         echo "/^BASELIB=/s%=.*%=        $(BASELIB)%" >>sedscript
 292         echo "/^BASESETUP=/s%=.*%=      $(BASESETUP)%" >>sedscript
 293
 294 # Bootstrap target
 295 boot:   clobber
 296         VERSION=`$(PYTHON) -c "import sys; print sys.version[:3]"`; \
 297         installdir=`$(PYTHON) -c "import sys; print sys.prefix"`; \
 298         exec_installdir=`$(PYTHON) -c "import sys; print sys.exec_prefix"`; \
 299         $(MAKE) -f Makefile.pre.in VPATH=$(VPATH) srcdir=$(srcdir) \
 300                 VERSION=$$VERSION \
 301                 installdir=$$installdir \
 302                 exec_installdir=$$exec_installdir \
 303                 Makefile
 304
 305 # Handy target to remove intermediate files and backups
 306 clean:
 307                 -rm -f *.o *~
 308
 309 # Handy target to remove everything that is easily regenerated
 310 clobber:        clean
 311                 -rm -f *.a tags TAGS config.c Makefile.pre $(TARGET) sedscript
 312                 -rm -f *.so *.sl so_locations
 313
 314
 315 # Handy target to remove everything you don't want to distribute
 316 distclean:      clobber
 317                 -rm -f Makefile Setup
 318
 319
 320
 321
 322 #------------------------------------------------------------------------
 323 #------------------------------------------------------------------------
 324 # Custom rules and dependencies added for wxPython
 325 #
 326
 327
 328 SWIGFLAGS=-c++ -shadow -python -dnone -D__WXGTK__ $(SEPARATE)
 329
 330
 331 PYMODULES = $(GENCODEDIR)/wx.py        $(GENCODEDIR)/events.py    \
 332             $(GENCODEDIR)/windows.py   $(GENCODEDIR)/misc.py      \
 333             $(GENCODEDIR)/gdi.py       $(GENCODEDIR)/mdi.py       \
 334             $(GENCODEDIR)/controls.py  $(GENCODEDIR)/controls2.py \
 335             $(GENCODEDIR)/windows2.py  $(GENCODEDIR)/cmndlgs.py   \
 336             $(GENCODEDIR)/frames.py    $(GENCODEDIR)/stattool.py   \
 337             $(GENCODEDIR)/utils.py     $(GENCODEDIR)/windows3.py  \
 338             __init__.py
 339
 340
 341 # Implicit rules to run SWIG
 342 $(GENCODEDIR)/%.cpp : %.i
 343         swig $(SWIGFLAGS) -c -o $@ $<
 344
 345 $(GENCODEDIR)/%.py : %.i
 346         swig $(SWIGFLAGS) -c -o $@ $<
 347
 348
 349 # This one must leave out the -c flag so we define the whole rule
 350 $(GENCODEDIR)/wx.cpp $(GENCODEDIR)/wx.py : wx.i my_typemaps.i _defs.i _extras.py
 351         swig $(SWIGFLAGS) -o $(GENCODEDIR)/wx.cpp wx.i
 352
 353 ifdef SEPARATE
 354 $(GENCODEDIR)/utils.cpp $(GENCODEDIR)/utils.py : utils.i my_typemaps.i
 355         swig $(SWIGFLAGS) -o $(GENCODEDIR)/utils.cpp utils.i
 356 else
 357 $(GENCODEDIR)/utils.cpp     $(GENCODEDIR)/utils.py     : utils.i      my_typemaps.i _defs.i
 358 endif
 359
 360 # define some dependencies
 361 $(GENCODEDIR)/windows.cpp   $(GENCODEDIR)/windows.py   : windows.i    my_typemaps.i _defs.i
 362 $(GENCODEDIR)/windows2.cpp  $(GENCODEDIR)/windows2.py  : windows2.i   my_typemaps.i _defs.i
 363 $(GENCODEDIR)/windows3.cpp  $(GENCODEDIR)/windows3.py  : windows3.i   my_typemaps.i _defs.i
 364 $(GENCODEDIR)/events.cpp    $(GENCODEDIR)/events.py    : events.i     my_typemaps.i _defs.i
 365 $(GENCODEDIR)/misc.cpp      $(GENCODEDIR)/misc.py      : misc.i       my_typemaps.i _defs.i
 366 $(GENCODEDIR)/gdi.cpp       $(GENCODEDIR)/gdi.py       : gdi.i        my_typemaps.i _defs.i
 367 $(GENCODEDIR)/mdi.cpp       $(GENCODEDIR)/mdi.py       : mdi.i        my_typemaps.i _defs.i
 368 $(GENCODEDIR)/controls.cpp  $(GENCODEDIR)/controls.py  : controls.i   my_typemaps.i _defs.i
 369 $(GENCODEDIR)/controls2.cpp $(GENCODEDIR)/controls2.py : controls2.i  my_typemaps.i _defs.i
 370 $(GENCODEDIR)/cmndlgs.cpp   $(GENCODEDIR)/cmndlgs.py   : cmndlgs.i    my_typemaps.i _defs.i
 371 $(GENCODEDIR)/frames.cpp    $(GENCODEDIR)/frames.py    : frames.i     my_typemaps.i _defs.i
 372 $(GENCODEDIR)/stattool.cpp  $(GENCODEDIR)/stattool.py  : stattool.i   my_typemaps.i _defs.i
 373 $(GENCODEDIR)/utils.cpp     $(GENCODEDIR)/utils.py     : utils.i      my_typemaps.i _defs.i
 374
 375 $(GENCODEDIR)/helpers.cpp:
 376         ln -s `pwd`/helpers.cpp $@
 377
 378
 379 wxInstall :     sharedmods $(PYMODULES)
 380         if test ! -d $(TARGETDIR) ; then \
 381                 mkdir $(TARGETDIR) ; else true ; fi
 382         if [ "$(SHAREDMODS)" != "" ]; then \
 383                  chmod 755 $(SHAREDMODS); \
 384                  cp $(SHAREDMODS) $(TARGETDIR); fi
 385         -for i in $(PYMODULES); do \
 386                 cp $$i $(TARGETDIR); \
 387         done
 388         python $(LIBDEST)/compileall.py -l $(TARGETDIR)
 389         python -O $(LIBDEST)/compileall.py -l $(TARGETDIR)
 390
 391
 392 lib : libwxPython.a
 393
 394 libwxPython.a : lib.a
 395         cp $< $@