]>
git.saurik.com Git - wxWidgets.git/blob - include/wx/univ/setup0.h
1 /////////////////////////////////////////////////////////////////////////////
2 // Name: wx/univ/setup.h
3 // Purpose: Configuration for the universal build of the library
4 // Author: Julian Smart
7 // Copyright: (c) Julian Smart
8 // Licence: wxWindows licence
9 /////////////////////////////////////////////////////////////////////////////
14 /* --- start common options --- */
15 // ----------------------------------------------------------------------------
17 // ----------------------------------------------------------------------------
19 // define this to 0 when building wxBase library - this can also be done from
20 // makefile/project file overriding the value here
25 // ----------------------------------------------------------------------------
26 // compatibility settings
27 // ----------------------------------------------------------------------------
29 // This setting determines the compatibility with 2.6 API: set it to 0 to
30 // flag all cases of using deprecated functions.
32 // Default is 1 but please try building your code with 0 as the default will
33 // change to 0 in the next version and the deprecated functions will disappear
34 // in the version after it completely.
36 // Recommended setting: 0 (please update your code)
37 #define WXWIN_COMPATIBILITY_2_6 0
39 // This setting determines the compatibility with 2.8 API: set it to 0 to
40 // flag all cases of using deprecated functions.
42 // Default is 1 but please try building your code with 0 as the default will
43 // change to 0 in the next version and the deprecated functions will disappear
44 // in the version after it completely.
46 // Recommended setting: 0 (please update your code)
47 #define WXWIN_COMPATIBILITY_2_8 1
49 // MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when
50 // default system font is used for wxWindow::GetCharWidth/Height() instead of
55 // Recommended setting: 0
56 #define wxDIALOG_UNIT_COMPATIBILITY 0
58 // ----------------------------------------------------------------------------
60 // ----------------------------------------------------------------------------
62 // Generic comment about debugging settings: they are very useful if you don't
63 // use any other memory leak detection tools such as Purify/BoundsChecker, but
64 // are probably redundant otherwise. Also, Visual C++ CRT has the same features
65 // as wxWidgets memory debugging subsystem built in since version 5.0 and you
66 // may prefer to use it instead of built in memory debugging code because it is
67 // faster and more fool proof.
69 // Using VC++ CRT memory debugging is enabled by default in debug mode
70 // (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
71 // and if __NO_VC_CRTDBG__ is not defined.
73 // If 1, enables wxDebugContext, for writing error messages to file, etc. If
74 // __WXDEBUG__ is not defined, will still use the normal memory operators.
78 // Recommended setting: 0
79 #define wxUSE_DEBUG_CONTEXT 0
81 // If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
82 // __WXDEBUG__ is also defined.
84 // WARNING: this code may not work with all architectures, especially if
85 // alignment is an issue. This switch is currently ignored for mingw / cygwin
89 // Recommended setting: 1 if you are not using a memory debugging tool, else 0
90 #define wxUSE_MEMORY_TRACING 0
92 // In debug mode, cause new and delete to be redefined globally.
93 // If this causes problems (e.g. link errors which is a common problem
94 // especially if you use another library which also redefines the global new
95 // and delete), set this to 0.
96 // This switch is currently ignored for mingw / cygwin
100 // Recommended setting: 0
101 #define wxUSE_GLOBAL_MEMORY_OPERATORS 0
103 // In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
104 // this causes problems (e.g. link errors), set this to 0. You may need to set
105 // this to 0 if using templates (at least for VC++). This switch is currently
106 // ignored for mingw / cygwin / CodeWarrior
110 // Recommended setting: 0
111 #define wxUSE_DEBUG_NEW_ALWAYS 0
113 // wxHandleFatalExceptions() may be used to catch the program faults at run
114 // time and, instead of terminating the program with a usual GPF message box,
115 // call the user-defined wxApp::OnFatalException() function. If you set
116 // wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
118 // This setting is for Win32 only and can only be enabled if your compiler
119 // supports Win32 structured exception handling (currently only VC++ does)
123 // Recommended setting: 1 if your compiler supports it.
124 #define wxUSE_ON_FATAL_EXCEPTION 1
126 // Set this to 1 to be able to generate a human-readable (unlike
127 // machine-readable minidump created by wxCrashReport::Generate()) stack back
128 // trace when your program crashes using wxStackWalker
130 // Default is 1 if supported by the compiler.
132 // Recommended setting: 1, set to 0 if your programs never crash
133 #define wxUSE_STACKWALKER 1
135 // Set this to 1 to compile in wxDebugReport class which allows you to create
136 // and optionally upload to your web site a debug report consisting of back
137 // trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
139 // Default is 1 if supported by the compiler.
141 // Recommended setting: 1, it is compiled into a separate library so there
142 // is no overhead if you don't use it
143 #define wxUSE_DEBUGREPORT 1
145 // ----------------------------------------------------------------------------
147 // ----------------------------------------------------------------------------
149 // These settings are obsolete: the library is always built in Unicode mode
150 // now, only set wxUSE_UNICODE to 0 to compile legacy code in ANSI mode if
151 // absolutely necessary -- updating it is strongly recommended as the ANSI mode
152 // will disappear completely in future wxWidgets releases.
153 #ifndef wxUSE_UNICODE
154 #define wxUSE_UNICODE 1
157 // wxUSE_WCHAR_T is required by wxWidgets now, don't change.
158 #define wxUSE_WCHAR_T 1
160 // ----------------------------------------------------------------------------
162 // ----------------------------------------------------------------------------
164 // Compile library in exception-safe mode? If set to 1, the library will try to
165 // behave correctly in presence of exceptions (even though it still will not
166 // use the exceptions itself) and notify the user code about any unhandled
167 // exceptions. If set to 0, propagation of the exceptions through the library
168 // code will lead to undefined behaviour -- but the code itself will be
169 // slightly smaller and faster.
171 // Note that like wxUSE_THREADS this option is automatically set to 0 if
172 // wxNO_EXCEPTIONS is defined.
176 // Recommended setting: depends on whether you intend to use C++ exceptions
177 // in your own code (1 if you do, 0 if you don't)
178 #define wxUSE_EXCEPTIONS 1
180 // Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
184 // Recommended setting: 0 (this is still work in progress...)
185 #define wxUSE_EXTENDED_RTTI 0
187 // Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
188 // std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
189 // and for wxHashMap to be implemented with templates.
193 // Recommended setting: YMMV
196 // Support for message/error logging. This includes wxLogXXX() functions and
197 // wxLog and derived classes. Don't set this to 0 unless you really know what
202 // Recommended setting: 1 (always)
205 // Recommended setting: 1
206 #define wxUSE_LOGWINDOW 1
208 // Recommended setting: 1
209 #define wxUSE_LOGGUI 1
211 // Recommended setting: 1
212 #define wxUSE_LOG_DIALOG 1
214 // Support for command line parsing using wxCmdLineParser class.
218 // Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
219 #define wxUSE_CMDLINE_PARSER 1
221 // Support for multithreaded applications: if 1, compile in thread classes
222 // (thread.h) and make the library a bit more thread safe. Although thread
223 // support is quite stable by now, you may still consider recompiling the
224 // library without it if you have no use for it - this will result in a
225 // somewhat smaller and faster operation.
227 // Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset
228 // to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
229 // build/msw/config.* file this value will have no effect.
233 // Recommended setting: 0 unless you do plan to develop MT applications
234 #define wxUSE_THREADS 1
236 // If enabled, compiles wxWidgets streams classes
238 // wx stream classes are used for image IO, process IO redirection, network
239 // protocols implementation and much more and so disabling this results in a
240 // lot of other functionality being lost.
244 // Recommended setting: 1 as setting it to 0 disables many other things
245 #define wxUSE_STREAMS 1
247 // This is not a real option but is used as the default value for
248 // wxUSE_STD_IOSTREAM and wxUSE_STD_STRING.
250 // Currently the Digital Mars and Watcom compilers come without standard C++
251 // library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
252 // them (e.g. from STLPort).
254 // VC++ 5.0 does include standard C++ library headers, however they produce
255 // many warnings that can't be turned off when compiled at warning level 4.
256 #if defined(__DMC__) || defined(__WATCOMC__) \
257 || (defined(_MSC_VER) && _MSC_VER < 1200)
258 #define wxUSE_STD_DEFAULT 0
260 #define wxUSE_STD_DEFAULT 1
263 // Use standard C++ streams if 1 instead of wx streams in some places. If
264 // disabled (default), wx streams are used everywhere and wxWidgets doesn't
265 // depend on the standard streams library.
267 // Notice that enabling this does not replace wx streams with std streams
268 // everywhere, in a lot of places wx streams are used no matter what.
272 // Recommended setting: 1 if you use the standard streams anyhow and so
273 // dependency on the standard streams library is not a
275 #define wxUSE_STD_IOSTREAM wxUSE_STD_DEFAULT
277 // Enable conversion to standard C++ string if 1.
279 // Default is 1 for most compilers.
281 // Recommended setting: 1 unless you want to ensure your program doesn't use
282 // the standard C++ library at all.
283 #define wxUSE_STD_STRING wxUSE_STD_DEFAULT
285 // Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
286 // Note that if the system's implementation does not support positional
287 // parameters, setting this to 1 forces the use of the wxWidgets implementation
288 // of wxVsnprintf. The standard vsnprintf() supports positional parameters on
289 // many Unix systems but usually doesn't under Windows.
291 // Positional parameters are very useful when translating a program since using
292 // them in formatting strings allow translators to correctly reorder the
293 // translated sentences.
297 // Recommended setting: 1 if you want to support multiple languages
298 #define wxUSE_PRINTF_POS_PARAMS 1
300 // ----------------------------------------------------------------------------
301 // non GUI features selection
302 // ----------------------------------------------------------------------------
304 // Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
305 // integer which is implemented in terms of native 64 bit integers if any or
306 // uses emulation otherwise.
308 // This class is required by wxDateTime and so you should enable it if you want
309 // to use wxDateTime. For most modern platforms, it will use the native 64 bit
310 // integers in which case (almost) all of its functions are inline and it
311 // almost does not take any space, so there should be no reason to switch it
314 // Recommended setting: 1
315 #define wxUSE_LONGLONG 1
317 // Set wxUSE_BASE64 to 1, to compile in Base64 support. This is required for
318 // storing binary data in wxConfig on most platforms.
322 // Recommended setting: 1 (but can be safely disabled if you don't use it)
323 #define wxUSE_BASE64 1
325 // Set this to 1 to be able to use wxEventLoop even in console applications
326 // (i.e. using base library only, without GUI). This is mostly useful for
327 // processing socket events but is also necessary to use timers in console
332 // Recommended setting: 1 (but can be safely disabled if you don't use it)
333 #define wxUSE_CONSOLE_EVENTLOOP 1
335 // Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
336 // POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
340 // Recommended setting: 1 (wxFile is highly recommended as it is required by
341 // i18n code, wxFileConfig and others)
343 #define wxUSE_FFILE 1
345 // Use wxFSVolume class providing access to the configured/active mount points
349 // Recommended setting: 1 (but may be safely disabled if you don't use it)
350 #define wxUSE_FSVOLUME 1
352 // Use wxStandardPaths class which allows to retrieve some standard locations
353 // in the file system
357 // Recommended setting: 1 (may be disabled to save space, but not much)
358 #define wxUSE_STDPATHS 1
360 // use wxTextBuffer class: required by wxTextFile
361 #define wxUSE_TEXTBUFFER 1
363 // use wxTextFile class: requires wxFile and wxTextBuffer, required by
365 #define wxUSE_TEXTFILE 1
367 // i18n support: _() macro, wxLocale class. Requires wxTextFile.
370 // Provide wxFoo_l() functions similar to standard foo() functions but taking
371 // an extra locale parameter.
373 // Notice that this is fully implemented only for the systems providing POSIX
374 // xlocale support or Microsoft Visual C++ >= 8 (which provides proprietary
375 // almost-equivalent of xlocale functions), otherwise wxFoo_l() functions will
376 // only work for the current user locale and "C" locale. You can use
377 // wxHAS_XLOCALE_SUPPORT to test whether the full support is available.
381 // Recommended setting: 1 but may be disabled if you are writing programs
382 // running only in C locale anyhow
383 #define wxUSE_XLOCALE 1
385 // Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
386 // allow to manipulate dates, times and time intervals. wxDateTime replaces the
387 // old wxTime and wxDate classes which are still provided for backwards
388 // compatibility (and implemented in terms of wxDateTime).
390 // Note that this class is relatively new and is still officially in alpha
391 // stage because some features are not yet (fully) implemented. It is already
392 // quite useful though and should only be disabled if you are aiming at
393 // absolutely minimal version of the library.
395 // Requires: wxUSE_LONGLONG
399 // Recommended setting: 1
400 #define wxUSE_DATETIME 1
402 // Set wxUSE_TIMER to 1 to compile wxTimer class
406 // Recommended setting: 1
407 #define wxUSE_TIMER 1
409 // Use wxStopWatch clas.
413 // Recommended setting: 1 (needed by wxSocket)
414 #define wxUSE_STOPWATCH 1
416 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
417 // which allow the application to store its settings in the persistent
418 // storage. Setting this to 1 will also enable on-demand creation of the
419 // global config object in wxApp.
421 // See also wxUSE_CONFIG_NATIVE below.
423 // Recommended setting: 1
424 #define wxUSE_CONFIG 1
426 // If wxUSE_CONFIG is 1, you may choose to use either the native config
427 // classes under Windows (using .INI files under Win16 and the registry under
428 // Win32) or the portable text file format used by the config classes under
431 // Default is 1 to use native classes. Note that you may still use
432 // wxFileConfig even if you set this to 1 - just the config object created by
433 // default for the applications needs will be a wxRegConfig or wxIniConfig and
436 // Recommended setting: 1
437 #define wxUSE_CONFIG_NATIVE 1
439 // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
440 // to connect/disconnect from the network and be notified whenever the dial-up
441 // network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
445 // Recommended setting: 1
446 #define wxUSE_DIALUP_MANAGER 1
448 // Compile in classes for run-time DLL loading and function calling.
449 // Required by wxUSE_DIALUP_MANAGER.
451 // This setting is for Win32 only
455 // Recommended setting: 1
456 #define wxUSE_DYNLIB_CLASS 1
458 // experimental, don't use for now
459 #define wxUSE_DYNAMIC_LOADER 1
461 // Set to 1 to use socket classes
462 #define wxUSE_SOCKETS 1
464 // Set to 1 to use ipv6 socket classes (requires wxUSE_SOCKETS)
466 // Notice that currently setting this option under Windows will result in
467 // programs which can only run on recent OS versions (with ws2_32.dll
468 // installed) which is why it is disabled by default.
472 // Recommended setting: 1 if you need IPv6 support
475 // Set to 1 to enable virtual file systems (required by wxHTML)
476 #define wxUSE_FILESYSTEM 1
478 // Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
479 #define wxUSE_FS_ZIP 1
481 // Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM)
482 #define wxUSE_FS_ARCHIVE 1
484 // Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
485 #define wxUSE_FS_INET 1
487 // wxArchive classes for accessing archives such as zip and tar
488 #define wxUSE_ARCHIVE_STREAMS 1
490 // Set to 1 to compile wxZipInput/OutputStream classes.
491 #define wxUSE_ZIPSTREAM 1
493 // Set to 1 to compile wxTarInput/OutputStream classes.
494 #define wxUSE_TARSTREAM 1
496 // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
500 // If enabled, the code written by Apple will be used to write, in a portable
501 // way, float on the disk. See extended.c for the license which is different
502 // from wxWidgets one.
506 // Recommended setting: 1 unless you don't like the license terms (unlikely)
507 #define wxUSE_APPLE_IEEE 1
509 // Joystick support class
510 #define wxUSE_JOYSTICK 1
512 // wxFontEnumerator class
513 #define wxUSE_FONTENUM 1
515 // wxFontMapper class
516 #define wxUSE_FONTMAP 1
518 // wxMimeTypesManager class
519 #define wxUSE_MIMETYPE 1
521 // wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP
522 // or wxURL you need to set this to 1.
526 // Recommended setting: 1
527 #define wxUSE_PROTOCOL 1
529 // The settings for the individual URL schemes
530 #define wxUSE_PROTOCOL_FILE 1
531 #define wxUSE_PROTOCOL_FTP 1
532 #define wxUSE_PROTOCOL_HTTP 1
534 // Define this to use wxURL class.
537 // Define this to use native platform url and protocol support.
538 // Currently valid only for MS-Windows.
539 // Note: if you set this to 1, you can open ftp/http/gopher sites
540 // and obtain a valid input stream for these sites
541 // even when you set wxUSE_PROTOCOL_FTP/HTTP to 0.
542 // Doing so reduces the code size.
544 // This code is experimental and subject to change.
545 #define wxUSE_URL_NATIVE 0
547 // Support for wxVariant class used in several places throughout the library,
548 // notably in wxDataViewCtrl API.
552 // Recommended setting: 1 unless you want to reduce the library size as much as
553 // possible in which case setting this to 0 can gain up to 100KB.
554 #define wxUSE_VARIANT 1
556 // Support for regular expression matching via wxRegEx class: enable this to
557 // use POSIX regular expressions in your code. You need to compile regex
558 // library from src/regex to use it under Windows.
562 // Recommended setting: 1 if your compiler supports it, if it doesn't please
563 // contribute us a makefile for src/regex for it
564 #define wxUSE_REGEX 1
566 // wxSystemOptions class
567 #define wxUSE_SYSTEM_OPTIONS 1
570 #define wxUSE_SOUND 1
576 // Recommended setting: 1
577 #define wxUSE_MEDIACTRL 1
579 // Use wxWidget's XRC XML-based resource system. Recommended.
583 // Recommended setting: 1 (requires wxUSE_XML)
586 // XML parsing classes. Note that their API will change in the future, so
587 // using wxXmlDocument and wxXmlNode in your app is not recommended.
589 // Default is the same as wxUSE_XRC, i.e. 1 by default.
591 // Recommended setting: 1 (required by XRC)
592 #define wxUSE_XML wxUSE_XRC
594 // Use wxWidget's AUI docking system
598 // Recommended setting: 1
601 // Use wxPropertyGrid.
605 // Recommended setting: 1
606 #define wxUSE_PROPGRID 1
608 // Use wxStyledTextCtrl, a wxWidgets implementation of Scintilla.
612 // Recommended setting: 1
616 // Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
617 // 2D drawing API. (Still somewhat experimental)
619 // Please note that on Windows you will need to link with gdiplus.lib (use
620 // USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your
621 // application if you want it to be runnable on pre-XP systems.
625 // Recommended setting: 1
626 #ifndef wxUSE_GRAPHICS_CONTEXT
627 #define wxUSE_GRAPHICS_CONTEXT 0
630 // ----------------------------------------------------------------------------
631 // Individual GUI controls
632 // ----------------------------------------------------------------------------
634 // You must set wxUSE_CONTROLS to 1 if you are using any controls at all
635 // (without it, wxControl class is not compiled)
639 // Recommended setting: 1 (don't change except for very special programs)
640 #define wxUSE_CONTROLS 1
642 // wxPopupWindow class is a top level transient window. It is currently used
643 // to implement wxTipWindow
647 // Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
648 #define wxUSE_POPUPWIN 1
650 // wxTipWindow allows to implement the custom tooltips, it is used by the
651 // context help classes. Requires wxUSE_POPUPWIN.
655 // Recommended setting: 1 (may be set to 0)
656 #define wxUSE_TIPWINDOW 1
658 // Each of the settings below corresponds to one wxWidgets control. They are
659 // all switched on by default but may be disabled if you are sure that your
660 // program (including any standard dialogs it can show!) doesn't need them and
661 // if you desperately want to save some space. If you use any of these you must
662 // set wxUSE_CONTROLS as well.
666 // Recommended setting: 1
667 #define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl
668 #define wxUSE_BUTTON 1 // wxButton
669 #define wxUSE_BMPBUTTON 1 // wxBitmapButton
670 #define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
671 #define wxUSE_CHECKBOX 1 // wxCheckBox
672 #define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
673 #define wxUSE_CHOICE 1 // wxChoice
674 #define wxUSE_COLLPANE 1 // wxCollapsiblePane
675 #define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl
676 #define wxUSE_COMBOBOX 1 // wxComboBox
677 #define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
678 #define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
679 #define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl
680 #define wxUSE_EDITABLELISTBOX 1 // wxEditableListBox
681 #define wxUSE_FILECTRL 1 // wxFileCtrl
682 #define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl
683 #define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl
684 #define wxUSE_GAUGE 1 // wxGauge
685 #define wxUSE_HEADERCTRL 1 // wxHeaderCtrl
686 #define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl
687 #define wxUSE_LISTBOX 1 // wxListBox
688 #define wxUSE_LISTCTRL 1 // wxListCtrl
689 #define wxUSE_RADIOBOX 1 // wxRadioBox
690 #define wxUSE_RADIOBTN 1 // wxRadioButton
691 #define wxUSE_SCROLLBAR 1 // wxScrollBar
692 #define wxUSE_SEARCHCTRL 1 // wxSearchCtrl
693 #define wxUSE_SLIDER 1 // wxSlider
694 #define wxUSE_SPINBTN 1 // wxSpinButton
695 #define wxUSE_SPINCTRL 1 // wxSpinCtrl
696 #define wxUSE_STATBOX 1 // wxStaticBox
697 #define wxUSE_STATLINE 1 // wxStaticLine
698 #define wxUSE_STATTEXT 1 // wxStaticText
699 #define wxUSE_STATBMP 1 // wxStaticBitmap
700 #define wxUSE_TEXTCTRL 1 // wxTextCtrl
701 #define wxUSE_TOGGLEBTN 1 // requires wxButton
702 #define wxUSE_TREECTRL 1 // wxTreeCtrl
704 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
705 // below either wxStatusBar95 or a generic wxStatusBar will be used.
709 // Recommended setting: 1
710 #define wxUSE_STATUSBAR 1
712 // Two status bar implementations are available under Win32: the generic one
713 // or the wrapper around native control. For native look and feel the native
714 // version should be used.
716 // Default is 1 for the platforms where native status bar is supported.
718 // Recommended setting: 1 (there is no advantage in using the generic one)
719 #define wxUSE_NATIVE_STATUSBAR 1
721 // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
722 // classes at all. Otherwise, use the native toolbar class unless
723 // wxUSE_TOOLBAR_NATIVE is 0.
725 // Default is 1 for all settings.
727 // Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE.
728 #define wxUSE_TOOLBAR 1
729 #define wxUSE_TOOLBAR_NATIVE 1
731 // wxNotebook is a control with several "tabs" located on one of its sides. It
732 // may be used to logically organise the data presented to the user instead of
733 // putting everything in one huge dialog. It replaces wxTabControl and related
734 // classes of wxWin 1.6x.
738 // Recommended setting: 1
739 #define wxUSE_NOTEBOOK 1
741 // wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
746 // Recommended setting: 1
747 #define wxUSE_LISTBOOK 1
749 // wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
754 // Recommended setting: 1
755 #define wxUSE_CHOICEBOOK 1
757 // wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
762 // Recommended setting: 1
763 #define wxUSE_TREEBOOK 1
765 // wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
770 // Recommended setting: 1
771 #define wxUSE_TOOLBOOK 1
773 // wxTaskBarIcon is a small notification icon shown in the system toolbar or
778 // Recommended setting: 1 (but can be set to 0 if you don't need it)
779 #define wxUSE_TASKBARICON 1
783 // Default is 1, set to 0 to cut down compilation time and binaries size if you
786 // Recommended setting: 1
790 // wxMiniFrame class: a frame with narrow title bar
794 // Recommended setting: 1 (it doesn't cost almost anything)
795 #define wxUSE_MINIFRAME 1
797 // wxComboCtrl and related classes: combobox with custom popup window and
798 // not necessarily a listbox.
802 // Recommended setting: 1 but can be safely set to 0 except for wxUniv where it
803 // it used by wxComboBox
804 #define wxUSE_COMBOCTRL 1
806 // wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox
811 // Recommended setting: 1 but can be safely set to 0, except where it is
812 // needed as a base class for generic wxBitmapComboBox.
813 #define wxUSE_ODCOMBOBOX 1
815 // wxBitmapComboBox is a combobox that can have images in front of text items.
819 // Recommended setting: 1 but can be safely set to 0
820 #define wxUSE_BITMAPCOMBOBOX 1
822 // wxRearrangeCtrl is a wxCheckListBox with two buttons allowing to move items
823 // up and down in it. It is also used as part of wxRearrangeDialog.
827 // Recommended setting: 1 but can be safely set to 0 (currently used only by
829 #define wxUSE_REARRANGECTRL 1
831 // ----------------------------------------------------------------------------
832 // Miscellaneous GUI stuff
833 // ----------------------------------------------------------------------------
835 // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
836 #define wxUSE_ACCEL 1
838 // Hotkey support (currently Windows only)
839 #define wxUSE_HOTKEY 1
841 // Use wxCaret: a class implementing a "cursor" in a text control (called caret
846 // Recommended setting: 1 (can be safely set to 0, not used by the library)
847 #define wxUSE_CARET 1
849 // Use wxDisplay class: it allows enumerating all displays on a system and
850 // their geometries as well as finding the display on which the given point or
855 // Recommended setting: 1 if you need it, can be safely set to 0 otherwise
856 #define wxUSE_DISPLAY 1
858 // Miscellaneous geometry code: needed for Canvas library
859 #define wxUSE_GEOMETRY 1
861 // Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
866 // Recommended setting: 1 (set it to 0 if you don't use any of the controls
867 // enumerated above, then this class is mostly useless too)
868 #define wxUSE_IMAGLIST 1
870 // Use wxMenu, wxMenuBar, wxMenuItem.
874 // Recommended setting: 1 (can't be disabled under MSW)
875 #define wxUSE_MENUS 1
877 // Use wxNotificationMessage.
879 // wxNotificationMessage allows to show non-intrusive messages to the user
880 // using balloons, banners, popups or whatever is the appropriate method for
881 // the current platform.
885 // Recommended setting: 1
886 #define wxUSE_NOTIFICATION_MESSAGE 1
888 // Use wxSashWindow class.
892 // Recommended setting: 1
895 // Use wxSplitterWindow class.
899 // Recommended setting: 1
900 #define wxUSE_SPLITTER 1
902 // Use wxToolTip and wxWindow::Set/GetToolTip() methods.
906 // Recommended setting: 1
907 #define wxUSE_TOOLTIPS 1
909 // wxValidator class and related methods
910 #define wxUSE_VALIDATORS 1
912 // Use reference counted ID management: this means that wxWidgets will track
913 // the automatically allocated ids (those used when you use wxID_ANY when
914 // creating a window, menu or toolbar item &c) instead of just supposing that
915 // the program never runs out of them. This is mostly useful only under wxMSW
916 // where the total ids range is limited to SHRT_MIN..SHRT_MAX and where
917 // long-running programs can run into problems with ids reuse without this. On
918 // the other platforms, where the ids have the full int range, this shouldn't
921 #define wxUSE_AUTOID_MANAGEMENT 1
923 #define wxUSE_AUTOID_MANAGEMENT 0
926 // ----------------------------------------------------------------------------
928 // ----------------------------------------------------------------------------
930 // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
931 // file selector, printer dialog). Switching this off also switches off the
932 // printing architecture and interactive wxPrinterDC.
936 // Recommended setting: 1 (unless it really doesn't work)
937 #define wxUSE_COMMON_DIALOGS 1
939 // wxBusyInfo displays window with message when app is busy. Works in same way
941 #define wxUSE_BUSYINFO 1
943 // Use single/multiple choice dialogs.
947 // Recommended setting: 1 (used in the library itself)
948 #define wxUSE_CHOICEDLG 1
950 // Use colour picker dialog
954 // Recommended setting: 1
955 #define wxUSE_COLOURDLG 1
957 // wxDirDlg class for getting a directory name from user
958 #define wxUSE_DIRDLG 1
960 // TODO: setting to choose the generic or native one
962 // Use file open/save dialogs.
966 // Recommended setting: 1 (used in many places in the library itself)
967 #define wxUSE_FILEDLG 1
969 // Use find/replace dialogs.
973 // Recommended setting: 1 (but may be safely set to 0)
974 #define wxUSE_FINDREPLDLG 1
976 // Use font picker dialog
980 // Recommended setting: 1 (used in the library itself)
981 #define wxUSE_FONTDLG 1
983 // Use wxMessageDialog and wxMessageBox.
987 // Recommended setting: 1 (used in the library itself)
988 #define wxUSE_MSGDLG 1
990 // progress dialog class for lengthy operations
991 #define wxUSE_PROGRESSDLG 1
993 // support for startup tips (wxShowTip &c)
994 #define wxUSE_STARTUP_TIPS 1
996 // text entry dialog and wxGetTextFromUser function
997 #define wxUSE_TEXTDLG 1
999 // number entry dialog
1000 #define wxUSE_NUMBERDLG 1
1002 // splash screen class
1003 #define wxUSE_SPLASH 1
1006 #define wxUSE_WIZARDDLG 1
1008 // Compile in wxAboutBox() function showing the standard "About" dialog.
1012 // Recommended setting: 1 but can be set to 0 to save some space if you don't
1013 // use this function
1014 #define wxUSE_ABOUTDLG 1
1016 // ----------------------------------------------------------------------------
1017 // Metafiles support
1018 // ----------------------------------------------------------------------------
1020 // Windows supports the graphics format known as metafile which is, though not
1021 // portable, is widely used under Windows and so is supported by wxWin (under
1022 // Windows only, of course). Win16 (Win3.1) used the so-called "Window
1023 // MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
1024 // Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
1025 // default, WMFs will be used under Win16 and EMFs under Win32. This may be
1026 // changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
1027 // wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
1028 // in any metafile related classes at all.
1030 // Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
1032 // Recommended setting: default or 0 for everything for portable programs.
1033 #define wxUSE_METAFILE 1
1034 #define wxUSE_ENH_METAFILE 1
1035 #define wxUSE_WIN_METAFILES_ALWAYS 0
1037 // ----------------------------------------------------------------------------
1038 // Big GUI components
1039 // ----------------------------------------------------------------------------
1041 // Set to 0 to disable MDI support.
1043 // Requires wxUSE_NOTEBOOK under platforms other than MSW.
1047 // Recommended setting: 1, can be safely set to 0.
1050 // Set to 0 to disable document/view architecture
1051 #define wxUSE_DOC_VIEW_ARCHITECTURE 1
1053 // Set to 0 to disable MDI document/view architecture
1055 // Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
1056 #define wxUSE_MDI_ARCHITECTURE 1
1058 // Set to 0 to disable print/preview architecture code
1059 #define wxUSE_PRINTING_ARCHITECTURE 1
1061 // wxHTML sublibrary allows to display HTML in wxWindow programs and much,
1066 // Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
1068 #define wxUSE_HTML 1
1070 // Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
1071 // headers and libraries to be able to compile the library with wxUSE_GLCANVAS
1072 // set to 1 and, under Windows, also to add opengl32.lib and glu32.lib to the
1073 // list of libraries used to link your application (although this is done
1074 // implicitly for Microsoft Visual C++ users).
1076 // Default is 1 unless the compiler is known to ship without the necessary
1077 // headers (Digital Mars) or the platform doesn't support OpenGL (Windows CE).
1079 // Recommended setting: 1 if you intend to use OpenGL, can be safely set to 0
1081 #define wxUSE_GLCANVAS 1
1083 // wxRichTextCtrl allows editing of styled text.
1087 // Recommended setting: 1, set to 0 if you want compile a
1089 #define wxUSE_RICHTEXT 1
1091 // ----------------------------------------------------------------------------
1093 // ----------------------------------------------------------------------------
1095 // Use wxClipboard class for clipboard copy/paste.
1099 // Recommended setting: 1
1100 #define wxUSE_CLIPBOARD 1
1102 // Use wxDataObject and related classes. Needed for clipboard and OLE drag and
1107 // Recommended setting: 1
1108 #define wxUSE_DATAOBJ 1
1110 // Use wxDropTarget and wxDropSource classes for drag and drop (this is
1111 // different from "built in" drag and drop in wxTreeCtrl which is always
1112 // available). Requires wxUSE_DATAOBJ.
1116 // Recommended setting: 1
1117 #define wxUSE_DRAG_AND_DROP 1
1119 // Use wxAccessible for enhanced and customisable accessibility.
1120 // Depends on wxUSE_OLE.
1124 // Recommended setting (at present): 0
1125 #define wxUSE_ACCESSIBILITY 0
1127 // ----------------------------------------------------------------------------
1128 // miscellaneous settings
1129 // ----------------------------------------------------------------------------
1131 // wxSingleInstanceChecker class allows to verify at startup if another program
1132 // instance is running.
1136 // Recommended setting: 1 (the class is tiny, disabling it won't save much
1138 #define wxUSE_SNGLINST_CHECKER 1
1140 #define wxUSE_DRAGIMAGE 1
1143 // 0 for no interprocess comms
1144 #define wxUSE_HELP 1
1145 // 0 for no help facility
1147 // Should we use MS HTML help for wxHelpController? If disabled, neither
1148 // wxCHMHelpController nor wxBestHelpController are available.
1150 // Default is 1 under MSW, 0 is always used for the other platforms.
1152 // Recommended setting: 1, only set to 0 if you have trouble compiling
1153 // wxCHMHelpController (could be a problem with really ancient compilers)
1154 #define wxUSE_MS_HTML_HELP 1
1157 // Use wxHTML-based help controller?
1158 #define wxUSE_WXHTML_HELP 1
1160 #define wxUSE_CONSTRAINTS 1
1161 // 0 for no window layout constraint system
1163 #define wxUSE_SPLINES 1
1166 #define wxUSE_MOUSEWHEEL 1
1167 // Include mouse wheel support
1169 // ----------------------------------------------------------------------------
1170 // wxDC classes for various output formats
1171 // ----------------------------------------------------------------------------
1173 // Set to 1 for PostScript device context.
1174 #define wxUSE_POSTSCRIPT 0
1176 // Set to 1 to use font metric files in GetTextExtent
1177 #define wxUSE_AFM_FOR_POSTSCRIPT 1
1179 // Set to 1 to compile in support for wxSVGFileDC, a wxDC subclass which allows
1180 // to create files in SVG (Scalable Vector Graphics) format.
1183 // ----------------------------------------------------------------------------
1184 // other compiler (mis)features
1185 // ----------------------------------------------------------------------------
1187 // Set this to 0 if your compiler can't cope with omission of prototype
1192 // Recommended setting: 1 (should never need to set this to 0)
1193 #define REMOVE_UNUSED_ARG 1
1195 // VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
1196 // them. Set this option to 1 to use <iostream.h>, 0 to use <iostream>.
1198 // Note that newer compilers (including VC++ 7.1 and later) don't support
1199 // wxUSE_IOSTREAMH == 1 and so <iostream> will be used anyhow.
1203 // Recommended setting: 0, only set to 1 if you use a really old compiler
1204 #define wxUSE_IOSTREAMH 0
1206 // ----------------------------------------------------------------------------
1207 // image format support
1208 // ----------------------------------------------------------------------------
1210 // wxImage supports many different image formats which can be configured at
1211 // compile-time. BMP is always supported, others are optional and can be safely
1212 // disabled if you don't plan to use images in such format sometimes saving
1213 // substantial amount of code in the final library.
1215 // Some formats require an extra library which is included in wxWin sources
1216 // which is mentioned if it is the case.
1218 // Set to 1 for wxImage support (recommended).
1219 #define wxUSE_IMAGE 1
1221 // Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
1222 #define wxUSE_LIBPNG 1
1224 // Set to 1 for JPEG format support (requires libjpeg)
1225 #define wxUSE_LIBJPEG 1
1227 // Set to 1 for TIFF format support (requires libtiff)
1228 #define wxUSE_LIBTIFF 1
1230 // Set to 1 for TGA format support (loading only)
1233 // Set to 1 for GIF format support
1236 // Set to 1 for PNM format support
1239 // Set to 1 for PCX format support
1242 // Set to 1 for IFF format support (Amiga format)
1245 // Set to 1 for XPM format support
1248 // Set to 1 for MS Icons and Cursors format support
1249 #define wxUSE_ICO_CUR 1
1251 // Set to 1 to compile in wxPalette class
1252 #define wxUSE_PALETTE 1
1254 // ----------------------------------------------------------------------------
1255 // wxUniversal-only options
1256 // ----------------------------------------------------------------------------
1258 // Set to 1 to enable compilation of all themes, this is the default
1259 #define wxUSE_ALL_THEMES 1
1261 // Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES
1262 // is unset, if it is set these options are not used; notice that metal theme
1264 #define wxUSE_THEME_GTK 0
1265 #define wxUSE_THEME_METAL 0
1266 #define wxUSE_THEME_MONO 0
1267 #define wxUSE_THEME_WIN32 0
1270 /* --- end common options --- */
1272 /* --- start MSW options --- */
1273 // ----------------------------------------------------------------------------
1274 // Windows-only settings
1275 // ----------------------------------------------------------------------------
1277 // Set wxUSE_UNICODE_MSLU to 1 if you're compiling wxWidgets in Unicode mode
1278 // and want to run your programs under Windows 9x and not only NT/2000/XP.
1279 // This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
1280 // http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
1281 // that you will have to modify the makefiles to include unicows.lib import
1282 // library as the first library (see installation instructions in install.txt
1283 // to learn how to do it when building the library or samples).
1285 // If your compiler doesn't have unicows.lib, you can get a version of it at
1286 // http://libunicows.sourceforge.net
1290 // Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
1291 #ifndef wxUSE_UNICODE_MSLU
1292 #define wxUSE_UNICODE_MSLU 0
1295 // Set this to 1 if you want to use wxWidgets and MFC in the same program. This
1296 // will override some other settings (see below)
1300 // Recommended setting: 0 unless you really have to use MFC
1303 // Set this to 1 for generic OLE support: this is required for drag-and-drop,
1304 // clipboard, OLE Automation. Only set it to 0 if your compiler is very old and
1305 // can't compile/doesn't have the OLE headers.
1309 // Recommended setting: 1
1312 // Set this to 1 to enable wxAutomationObject class.
1316 // Recommended setting: 1 if you need to control other applications via OLE
1317 // Automation, can be safely set to 0 otherwise
1318 #define wxUSE_OLE_AUTOMATION 1
1320 // Set this to 1 to enable wxActiveXContainer class allowing to embed OLE
1325 // Recommended setting: 1, required by wxMediaCtrl
1326 #define wxUSE_ACTIVEX 1
1328 // wxDC cacheing implementation
1329 #define wxUSE_DC_CACHEING 1
1331 // Set this to 1 to enable wxDIB class used internally for manipulating
1334 // Default is 1, set it to 0 only if you don't use wxImage neither
1336 // Recommended setting: 1 (without it conversion to/from wxImage won't work)
1337 #define wxUSE_WXDIB 1
1339 // Set to 0 to disable PostScript print/preview architecture code under Windows
1340 // (just use Windows printing).
1341 #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
1343 // Set this to 1 to compile in wxRegKey class.
1347 // Recommended setting: 1, this is used internally by wx in a few places
1348 #define wxUSE_REGKEY 1
1350 // Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
1351 // which allows to put more than ~32Kb of text in it even under Win9x (NT
1352 // doesn't have such limitation).
1354 // Default is 1 for compilers which support it
1356 // Recommended setting: 1, only set it to 0 if your compiler doesn't have
1357 // or can't compile <richedit.h>
1358 #define wxUSE_RICHEDIT 1
1360 // Set this to 1 to use extra features of richedit v2 and later controls
1362 // Default is 1 for compilers which support it
1364 // Recommended setting: 1
1365 #define wxUSE_RICHEDIT2 1
1367 // Set this to 1 to enable support for the owner-drawn menu and listboxes. This
1368 // is required by wxUSE_CHECKLISTBOX.
1372 // Recommended setting: 1, set to 0 for a small library size reduction
1373 #define wxUSE_OWNER_DRAWN 1
1375 // Set this to 1 to enable MSW-specific wxTaskBarIcon::ShowBalloon() method. It
1376 // is required by native wxNotificationMessage implementation.
1378 // Default is 1 but disabled in wx/msw/chkconf.h if SDK is too old to contain
1379 // the necessary declarations.
1381 // Recommended setting: 1, set to 0 for a tiny library size reduction
1382 #define wxUSE_TASKBARICON_BALLOONS 1
1384 // Set to 1 to compile MS Windows XP theme engine support
1385 #define wxUSE_UXTHEME 1
1387 // Set to 1 to use InkEdit control (Tablet PC), if available
1388 #define wxUSE_INKEDIT 0
1390 // Set to 1 to enable .INI files based wxConfig implementation (wxIniConfig)
1394 // Recommended setting: 0, nobody uses .INI files any more
1395 #define wxUSE_INICONF 0
1397 // ----------------------------------------------------------------------------
1398 // Generic versions of native controls
1399 // ----------------------------------------------------------------------------
1401 // Set this to 1 to be able to use wxDatePickerCtrlGeneric in addition to the
1402 // native wxDatePickerCtrl
1406 // Recommended setting: 0, this is mainly used for testing
1407 #define wxUSE_DATEPICKCTRL_GENERIC 0
1409 // ----------------------------------------------------------------------------
1410 // Crash debugging helpers
1411 // ----------------------------------------------------------------------------
1413 // Set this to 1 to be able to use wxCrashReport::Generate() to create mini
1414 // dumps of your program when it crashes (or at any other moment)
1416 // Default is 1 if supported by the compiler (VC++ and recent BC++ only).
1418 // Recommended setting: 1, set to 0 if your programs never crash
1419 #define wxUSE_CRASHREPORT 1
1420 /* --- end MSW options --- */
1422 /* --- start wxUniv options --- */
1423 // ----------------------------------------------------------------------------
1424 // wxUniversal-only options
1425 // ----------------------------------------------------------------------------
1427 // Set to 1 to enable compilation of all themes, this is the default
1428 #define wxUSE_ALL_THEMES 1
1430 // Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES
1431 // is unset, if it is set these options are not used; notice that metal theme
1433 #define wxUSE_THEME_GTK 0
1434 #define wxUSE_THEME_METAL 0
1435 #define wxUSE_THEME_MONO 0
1436 #define wxUSE_THEME_WIN32 0
1437 /* --- end wxUniv options --- */
1439 #endif // _WX_SETUP_H_