wxPython/distrib/wxPythonFull.spec.in

   1 #----------------------------------------------------------------------
   2 # Name:        wxPython.spec
   3 # Purpose:     RPM Build and packaging instructions
   4 #
   5 # Author:      Robin Dunn
   6 #
   7 # RCS-ID:      $Id$
   8 # Copyright:   (c) 2004 by Total Control Software
   9 # Licence:     wxWindows license
  10 #----------------------------------------------------------------------
  11
  12
  13 # The following values can be set on the rpmbuild command line with
  14 # --define 'name VALUE'  If no value is set on the command line then
  15 # the default value set here will be used instead.
  16
  17
  18 # Which version of Python to build with.  Used to assemble python
  19 # binary name so use '2.3', '2.4', etc.
  20 %if %{?pyver:0}%{!?pyver:1}
  21 %define pyver 2.4
  22 %endif
  23
  24
  25 # Which wxWidgets port to build and use.  Current acceptable values
  26 # are 'gtk' and 'gtk2'.
  27 %if %{?port:0}%{!?port:1}
  28 %define port gtk2
  29 %endif
  30
  31
  32 # Build in unicode mode?  Can only be used if port is gtk2, acceptable
  33 # values are '0' and '1'
  34 %if %{?unicode:0}%{!?unicode:1}
  35 %define unicode 1
  36 %endif
  37
  38
  39 # Should the builtin image and etc. libs be used, or system libs?
  40 # Distro specific RPMs should probably set this to 0, generic ones
  41 # should use 1.
  42 # NOTE: I'm trying 0 for this next release to see if I can get rid of
  43 # this...
  44 %if %{?builtin_libs:0}%{!?builtin_libs:1}
  45 %define builtin_libs 0
  46 %endif
  47
  48
  49 # Should --enable-debug_flag be used in release builds?  Using it
  50 # defines __WXDEBUG__ and gives us runtime diagnostics that are turned
  51 # into Python exceptions.  (So turning it on is a very helpful thing
  52 # IMO and is recommended.)  The code is still compiled with
  53 # optimization flags and and without debug info and such when this
  54 # option is used, it simply turns on some extra code.
  55 %if %{?debug_flag:0}%{!?debug_flag:1}
  56 %define debug_flag 1
  57 %endif
  58
  59
  60 # Used to set the Release tag below.  I normally use it to define what
  61 # distro the RPM was build on and also include the version of Python
  62 # it was built with.
  63 %if %{?release:0}%{!?release:1}
  64 %define release 1_py%{pyver}
  65 %endif
  66
  67
  68
  69 #----------------------------------------------------------------------
  70 # Other variables used below
  71
  72 %define pref       %{_prefix}
  73 %define python     /usr/bin/python%{pyver}
  74 %define tarname    @TARNAME@
  75 %define version    @VERSION@
  76 %define ver2       @VER2@
  77
  78 %define chartype   %(if [ "%{unicode}" = "1" ]; then echo unicode; else echo ansi; fi)
  79 %define gtktype    %(if [ "%{port}" = "gtk2" ]; then echo 2; fi)
  80 %define using_gtk1 %(if [ "%{port}" = "gtk" ]; then echo 1; else echo 0; fi)
  81
  82 %define wxprefbase %{pref}/lib/wxPython
  83 %define wxpref     %{wxprefbase}-%{version}-%{port}-%{chartype}
  84 %define pkgname    wxPython
  85
  86 # turn off the generation of debuginfo rpm  (RH9) ??
  87 %define debug_package %{nil}
  88
  89
  90 #----------------------------------------------------------------------
  91 # Package definition
  92 #----------------------------------------------------------------------
  93 Name:      %{pkgname}%{ver2}
  94 Summary:   Cross platform GUI toolkit for Python
  95 Version:   %{version}
  96 Release:   %{release}
  97 Source0:   %{tarname}-%{version}.tar.gz
  98 License:   wx Library Licence, Version 3
  99 URL:       http://wxPython.org/
 100 Packager:  Robin Dunn <robin@alldunn.com>
 101 Group:     Development/Python
 102 BuildRoot: %{_tmppath}/%{pkgname}-buildroot
 103 Prefix:    %{pref}
 104
 105 %description
 106 Cross platform GUI toolkit for Python
 107
 108
 109
 110
 111 %package -n %{pkgname}%{ver2}-%{port}-%{chartype}
 112 Summary:   Cross platform GUI toolkit for Python
 113 Group:     Development/Python
 114 Requires:  %{pkgname}-common
 115 Obsoletes: wxPythonGTK%{gtktype}-py%{pyver}, wxPythonGTK%{gtktype}
 116 Provides:  wxPython
 117
 118
 119 %description -n %{pkgname}%{ver2}-%{port}-%{chartype}
 120 wxPython is a GUI toolkit for the Python programming language. It
 121  allows Python programmers to create programs with a robust, highly
 122 functional graphical user interface, simply and easily. It is
 123 implemented as a Python extension module (native code) that wraps the
 124 popular wxWidgets cross platform GUI library, which is written in C++.
 125
 126 wxPython is a cross-platform toolkit. The same program will usually
 127 run on multiple platforms without modification. Currently supported
 128 platforms are 32-bit Microsoft Windows, most Unix or unix-like
 129 systems, and Macintosh OS X.
 130
 131 This package contains the wxPython runtime files built for the
 132 wxWidgets %{port} port with %{chartype} character type.
 133
 134
 135
 136
 137
 138 %package -n %{pkgname}-common-%{port}-%{chartype}
 139 Summary: Common files for needed by all wxPython runtimes
 140 Group: Development/Python
 141 Provides: %{pkgname}-common
 142
 143 # They obsolete each other so any of them can be installed over another
 144 # without conflicts
 145 Obsoletes: %{pkgname}-common-gtk-ansi
 146 Obsoletes: %{pkgname}-common-gtk2-ansi
 147 Obsoletes: %{pkgname}-common-gtk2-unicode
 148
 149 %description -n %{pkgname}-common-%{port}-%{chartype}
 150 This package contains the common files needed by any version of the
 151 wxPython runtime.  This pacakge also installs a wx.pth file which will
 152 determine which of the installed runtimes is the default version of
 153 wxPython that is imported automatically with a bare "import wx".
 154
 155
 156
 157
 158
 159 %package -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 160 Summary: wxPython development files
 161 Group: Development/Libraries
 162 Requires: %{pkgname}%{ver2}-%{port}-%{chartype} = %{version}
 163
 164 %description -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 165 This packages contains the headers and etc. for building apps or
 166 Python extension modules that use the same wxWidgets shared libraries
 167 that wxPython uses.
 168
 169
 170
 171 #----------------------------------------------------------------------
 172 %prep
 173 %setup -q -n %{tarname}-%{version}
 174
 175
 176 #----------------------------------------------------------------------
 177 %build
 178
 179 WXDIR=`pwd`
 180
 181 # Configure and build wxWidgets
 182 mkdir bld
 183 cd bld
 184 ../configure \
 185 %if %{using_gtk1}
 186         --with-gtk=1 \
 187 %else
 188         --with-gtk=2 \
 189 %endif
 190         --prefix=%{wxpref} \
 191         --enable-monolithic \
 192         --disable-rpath \
 193         --with-opengl \
 194         --with-gnomeprint \
 195         --enable-geometry \
 196         --enable-optimise \
 197         --enable-sound  --with-sdl \
 198         --enable-display \
 199 %if %{unicode}
 200         --enable-unicode \
 201 %else
 202         --disable-unicode \
 203 %endif
 204 %if %{debug_flag}
 205         --enable-debug_flag \
 206 %endif
 207         --disable-debugreport \
 208 %if %{builtin_libs}
 209         --with-libjpeg=builtin \
 210         --with-libpng=builtin \
 211         --with-libtiff=builtin \
 212         --with-zlib=builtin \
 213 %endif
 214
 215
 216 make
 217 make -C contrib/src/animate
 218 make -C contrib/src/gizmos
 219 make -C contrib/src/stc
 220
 221
 222
 223 # Build wxPython
 224 cd $WXDIR/wxPython
 225 %{python} setup.py \
 226         WXPORT=%{port} \
 227         UNICODE=%{unicode} \
 228         EP_ADD_OPTS=1 \
 229         NO_SCRIPTS=1 \
 230         WX_CONFIG="$WXDIR/bld/wx-config --no_rpath" \
 231         build_ext --rpath=%{wxpref}/lib \
 232         build
 233
 234
 235
 236 #----------------------------------------------------------------------
 237 %install
 238
 239 WXDIR=`pwd`
 240
 241 # Install wxGTK and contribs
 242 cd bld
 243 make prefix=$RPM_BUILD_ROOT%{wxpref} install
 244 make -C contrib/src/animate prefix=$RPM_BUILD_ROOT%{wxpref} install
 245 make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install
 246 make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install
 247
 248
 249
 250 # Install wxPython for wxGTK
 251 cd $WXDIR/wxPython
 252 %{python} setup.py \
 253         WXPORT=%{port} \
 254         UNICODE=%{unicode} \
 255         EP_ADD_OPTS=1 \
 256         NO_SCRIPTS=1 \
 257         WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref} --no_rpath" \
 258         build_ext --rpath=%{wxpref}/lib \
 259         install \
 260         --root=$RPM_BUILD_ROOT
 261
 262
 263 # remove the wx-config symlink, we'll redo it when installing the -devel package
 264 rm $RPM_BUILD_ROOT%{wxpref}/bin/wx-config
 265
 266 # make sure that debug info is stripped
 267 strip $RPM_BUILD_ROOT%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/wx/*.so
 268
 269
 270 # Since I want this RPM to be as generic as possible I won't let
 271 # distutils copy the scripts (NO_SCRIPTS=1 above) since it will mangle
 272 # the #! line to use the real python pathname.  Since some distros
 273 # install python 2.2 as python2 and others as python I can't let
 274 # distutils do that otherwise the dependencies will be fouled up.
 275 # Copy them manually instead, leaving the #!/usr/bin/env line intact.
 276 cd $WXDIR/wxPython
 277 mkdir -p $RPM_BUILD_ROOT%{pref}/bin
 278 for s in \
 279         helpviewer \
 280         img2png \
 281         img2py \
 282         img2xpm \
 283         pyalacarte \
 284         pyalamode \
 285         pycrust \
 286         pywrap \
 287         pyshell \
 288         pywxrc \
 289         xrced; do
 290     cp scripts/$s $RPM_BUILD_ROOT%{pref}/bin
 291 done
 292
 293
 294
 295 # install KDE & GNOME menu items
 296 mkdir -p $RPM_BUILD_ROOT%{_datadir}/applnk/Development
 297 mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications
 298 for d in distrib/*.desktop; do
 299         install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applnk/Development
 300         install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applications
 301 done
 302
 303 # install KDE icons
 304 mkdir -p $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/{16x16,32x32}/apps
 305 mkdir -p $RPM_BUILD_ROOT%{_datadir}/pixmaps
 306 install -m 644 wx/py/PyCrust_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/PyCrust.png
 307 install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/PyCrust.png
 308 install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/PyCrust.png
 309 install -m 644 wx/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/XRCed.png
 310 install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/XRCed.png
 311 install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/XRCed.png
 312
 313 # install Mandrake menu items
 314 mkdir -p $RPM_BUILD_ROOT%{_libdir}/menu
 315 cat > $RPM_BUILD_ROOT%{_libdir}/menu/%{pkgname} <<EOF
 316 ?package(%{pkgname}): \\
 317         command="%{_bindir}/pyshell" \\
 318         needs="X11" \\
 319         icon="PyCrust.png" \\
 320         section="Applications/Development/Tools" \\
 321         title="PyShell" \\
 322         longtitle="GUI Python Shell"
 323 ?package(%{pkgname}): \\
 324         command="%{_bindir}/pycrust" \\
 325         needs="X11" \\
 326         icon="PyCrust.png" \\
 327         section="Applications/Development/Tools" \\
 328         title="PyCrust" \\
 329         longtitle="GUI Python Shell with Filling"
 330 ?package(%{pkgname}): \\
 331         command="%{_bindir}/pyalamode" \\
 332         needs="X11" \\
 333         icon="PyCrust.png" \\
 334         section="Applications/Development/Tools" \\
 335         title="PyAlaMode" \\
 336         longtitle="GUI Python Shell with Filling and editor windows"
 337 ?package(%{pkgname}): \\
 338         command="%{_bindir}/xrced" \\
 339         needs="X11" \\
 340         icon="XRCed.png" \\
 341         section="Applications/Development/Tools" \\
 342         title="XRCed" \\
 343         longtitle="wxPython XRC resource editor"
 344 EOF
 345
 346
 347 #----------------------------------------------------------------------
 348
 349 %post -n %{pkgname}%{ver2}-%{port}-%{chartype}
 350 if [ ! -e %{wxprefbase} ]; then
 351         ln -s %{pkgname}-%{version}-%{port}-%{chartype}  %{wxprefbase}
 352 fi
 353
 354 %preun -n %{pkgname}%{ver2}-%{port}-%{chartype}
 355 if [ -L %{wxprefbase} ]; then
 356         if [ `readlink %{wxprefbase}` == %{pkgname}-%{version}-%{port}-%{chartype} ]; then
 357                 rm -f %{wxprefbase}
 358         fi
 359 fi
 360
 361
 362
 363
 364 %post -n %{pkgname}-common-%{port}-%{chartype}
 365 # This is done on Mandrake to update its menus:
 366 if [ -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
 367
 368 %postun -n %{pkgname}-common-%{port}-%{chartype}
 369 # This is done on Mandrake to update its menus:
 370 if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
 371
 372
 373
 374 %post -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 375 cd %{wxpref}/bin
 376 ln -s ../lib/wx/config/%{port}-%{chartype}*  wx-config
 377
 378 %preun -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 379 rm %{wxpref}/bin/wx-config
 380
 381
 382 #----------------------------------------------------------------------
 383 %clean
 384 [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
 385
 386
 387 #----------------------------------------------------------------------
 388
 389 %files -n %{pkgname}%{ver2}-%{port}-%{chartype}
 390 %defattr(-,root,root)
 391 %doc docs/preamble.txt docs/licence.txt docs/lgpl.txt docs/readme.txt docs/changes.txt
 392 %doc wxPython/docs/*
 393 %dir %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}
 394 %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/*
 395 %dir %{wxpref}
 396 %dir %{wxpref}/lib
 397 %{wxpref}/lib/libwx_gtk*
 398 %{wxpref}/share
 399
 400
 401
 402 %files -n %{pkgname}-common-%{port}-%{chartype}
 403 %defattr(-,root,root)
 404 %{pref}/lib*/python%{pyver}/site-packages/wxversion.*
 405 %{pref}/lib*/python%{pyver}/site-packages/wx.pth
 406 %{_bindir}/*
 407 %{_datadir}/applnk/Development/*
 408 %{_datadir}/applications/*
 409 %{_datadir}/icons/hicolor/*/apps/*
 410 %{_datadir}/pixmaps/*
 411 %{_libdir}/menu/*
 412
 413
 414
 415
 416
 417 %files -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 418 %defattr(-,root,root)
 419 %{wxpref}/include
 420 %{wxpref}/lib/wx
 421 %dir %{wxpref}/bin
 422
 423
 424 #----------------------------------------------------------------------
 425 # end of file