| 1 | # Generated from ltmain.m4sh. |
| 2 | |
| 3 | # ltmain.sh (GNU libtool 1.2971 2008-04-29) 2.2.3a |
| 4 | # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 |
| 5 | |
| 6 | # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. |
| 7 | # This is free software; see the source for copying conditions. There is NO |
| 8 | # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| 9 | |
| 10 | # GNU Libtool is free software; you can redistribute it and/or modify |
| 11 | # it under the terms of the GNU General Public License as published by |
| 12 | # the Free Software Foundation; either version 2 of the License, or |
| 13 | # (at your option) any later version. |
| 14 | # |
| 15 | # As a special exception to the GNU General Public License, |
| 16 | # if you distribute this file as part of a program or library that |
| 17 | # is built using GNU Libtool, you may include this file under the |
| 18 | # same distribution terms that you use for the rest of that program. |
| 19 | # |
| 20 | # GNU Libtool is distributed in the hope that it will be useful, but |
| 21 | # WITHOUT ANY WARRANTY; without even the implied warranty of |
| 22 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 23 | # General Public License for more details. |
| 24 | # |
| 25 | # You should have received a copy of the GNU General Public License |
| 26 | # along with GNU Libtool; see the file COPYING. If not, a copy |
| 27 | # can be downloaded from http://www.gnu.org/licenses/gpl.html, |
| 28 | # or obtained by writing to the Free Software Foundation, Inc., |
| 29 | # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| 30 | |
| 31 | # Usage: $progname [OPTION]... [MODE-ARG]... |
| 32 | # |
| 33 | # Provide generalized library-building support services. |
| 34 | # |
| 35 | # --config show all configuration variables |
| 36 | # --debug enable verbose shell tracing |
| 37 | # -n, --dry-run display commands without modifying any files |
| 38 | # --features display basic configuration information and exit |
| 39 | # --mode=MODE use operation mode MODE |
| 40 | # --preserve-dup-deps don't remove duplicate dependency libraries |
| 41 | # --quiet, --silent don't print informational messages |
| 42 | # --tag=TAG use configuration variables from tag TAG |
| 43 | # -v, --verbose print informational messages (default) |
| 44 | # --version print version information |
| 45 | # -h, --help print short or long help message |
| 46 | # |
| 47 | # MODE must be one of the following: |
| 48 | # |
| 49 | # clean remove files from the build directory |
| 50 | # compile compile a source file into a libtool object |
| 51 | # execute automatically set library path, then run a program |
| 52 | # finish complete the installation of libtool libraries |
| 53 | # install install libraries or executables |
| 54 | # link create a library or an executable |
| 55 | # uninstall remove libraries from an installed directory |
| 56 | # |
| 57 | # MODE-ARGS vary depending on the MODE. |
| 58 | # Try `$progname --help --mode=MODE' for a more detailed description of MODE. |
| 59 | # |
| 60 | # When reporting a bug, please describe a test case to reproduce it and |
| 61 | # include the following information: |
| 62 | # |
| 63 | # host-triplet: $host |
| 64 | # shell: $SHELL |
| 65 | # compiler: $LTCC |
| 66 | # compiler flags: $LTCFLAGS |
| 67 | # linker: $LD (gnu? $with_gnu_ld) |
| 68 | # $progname: (GNU libtool 1.2971 2008-04-29) 2.2.3a |
| 69 | # automake: $automake_version |
| 70 | # autoconf: $autoconf_version |
| 71 | # |
| 72 | # Report bugs to <bug-libtool@gnu.org>. |
| 73 | |
| 74 | PROGRAM=ltmain.sh |
| 75 | PACKAGE=libtool |
| 76 | VERSION=2.2.3a |
| 77 | TIMESTAMP=" 1.2971 2008-04-29" |
| 78 | package_revision=1.2971 |
| 79 | |
| 80 | # Be Bourne compatible |
| 81 | if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
| 82 | emulate sh |
| 83 | NULLCMD=: |
| 84 | # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
| 85 | # is contrary to our usage. Disable this feature. |
| 86 | alias -g '${1+"$@"}'='"$@"' |
| 87 | setopt NO_GLOB_SUBST |
| 88 | else |
| 89 | case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac |
| 90 | fi |
| 91 | BIN_SH=xpg4; export BIN_SH # for Tru64 |
| 92 | DUALCASE=1; export DUALCASE # for MKS sh |
| 93 | |
| 94 | # NLS nuisances: We save the old values to restore during execute mode. |
| 95 | # Only set LANG and LC_ALL to C if already set. |
| 96 | # These must not be set unconditionally because not all systems understand |
| 97 | # e.g. LANG=C (notably SCO). |
| 98 | lt_user_locale= |
| 99 | lt_safe_locale= |
| 100 | for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES |
| 101 | do |
| 102 | eval "if test \"\${$lt_var+set}\" = set; then |
| 103 | save_$lt_var=\$$lt_var |
| 104 | $lt_var=C |
| 105 | export $lt_var |
| 106 | lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" |
| 107 | lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" |
| 108 | fi" |
| 109 | done |
| 110 | |
| 111 | $lt_unset CDPATH |
| 112 | |
| 113 | |
| 114 | |
| 115 | |
| 116 | |
| 117 | : ${CP="cp -f"} |
| 118 | : ${ECHO="echo"} |
| 119 | : ${EGREP="/usr/sfw/bin/ggrep -E"} |
| 120 | : ${FGREP="/usr/sfw/bin/ggrep -F"} |
| 121 | : ${GREP="/usr/sfw/bin/ggrep"} |
| 122 | : ${LN_S="ln -s"} |
| 123 | : ${MAKE="make"} |
| 124 | : ${MKDIR="mkdir"} |
| 125 | : ${MV="mv -f"} |
| 126 | : ${RM="rm -f"} |
| 127 | : ${SED="/usr/local/bin/sed"} |
| 128 | : ${SHELL="${CONFIG_SHELL-/bin/sh}"} |
| 129 | : ${Xsed="$SED -e 1s/^X//"} |
| 130 | |
| 131 | # Global variables: |
| 132 | EXIT_SUCCESS=0 |
| 133 | EXIT_FAILURE=1 |
| 134 | EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. |
| 135 | EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. |
| 136 | |
| 137 | exit_status=$EXIT_SUCCESS |
| 138 | |
| 139 | # Make sure IFS has a sensible default |
| 140 | lt_nl=' |
| 141 | ' |
| 142 | IFS=" $lt_nl" |
| 143 | |
| 144 | dirname="s,/[^/]*$,," |
| 145 | basename="s,^.*/,," |
| 146 | |
| 147 | # func_dirname_and_basename file append nondir_replacement |
| 148 | # perform func_basename and func_dirname in a single function |
| 149 | # call: |
| 150 | # dirname: Compute the dirname of FILE. If nonempty, |
| 151 | # add APPEND to the result, otherwise set result |
| 152 | # to NONDIR_REPLACEMENT. |
| 153 | # value returned in "$func_dirname_result" |
| 154 | # basename: Compute filename of FILE. |
| 155 | # value retuned in "$func_basename_result" |
| 156 | # Implementation must be kept synchronized with func_dirname |
| 157 | # and func_basename. For efficiency, we do not delegate to |
| 158 | # those functions but instead duplicate the functionality here. |
| 159 | func_dirname_and_basename () |
| 160 | { |
| 161 | # Extract subdirectory from the argument. |
| 162 | func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` |
| 163 | if test "X$func_dirname_result" = "X${1}"; then |
| 164 | func_dirname_result="${3}" |
| 165 | else |
| 166 | func_dirname_result="$func_dirname_result${2}" |
| 167 | fi |
| 168 | func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` |
| 169 | } |
| 170 | |
| 171 | # Generated shell functions inserted here. |
| 172 | |
| 173 | # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh |
| 174 | # is ksh but when the shell is invoked as "sh" and the current value of |
| 175 | # the _XPG environment variable is not equal to 1 (one), the special |
| 176 | # positional parameter $0, within a function call, is the name of the |
| 177 | # function. |
| 178 | progpath="$0" |
| 179 | |
| 180 | # The name of this program: |
| 181 | # In the unlikely event $progname began with a '-', it would play havoc with |
| 182 | # func_echo (imagine progname=-n), so we prepend ./ in that case: |
| 183 | func_dirname_and_basename "$progpath" |
| 184 | progname=$func_basename_result |
| 185 | case $progname in |
| 186 | -*) progname=./$progname ;; |
| 187 | esac |
| 188 | |
| 189 | # Make sure we have an absolute path for reexecution: |
| 190 | case $progpath in |
| 191 | [\\/]*|[A-Za-z]:\\*) ;; |
| 192 | *[\\/]*) |
| 193 | progdir=$func_dirname_result |
| 194 | progdir=`cd "$progdir" && pwd` |
| 195 | progpath="$progdir/$progname" |
| 196 | ;; |
| 197 | *) |
| 198 | save_IFS="$IFS" |
| 199 | IFS=: |
| 200 | for progdir in $PATH; do |
| 201 | IFS="$save_IFS" |
| 202 | test -x "$progdir/$progname" && break |
| 203 | done |
| 204 | IFS="$save_IFS" |
| 205 | test -n "$progdir" || progdir=`pwd` |
| 206 | progpath="$progdir/$progname" |
| 207 | ;; |
| 208 | esac |
| 209 | |
| 210 | # Sed substitution that helps us do robust quoting. It backslashifies |
| 211 | # metacharacters that are still active within double-quoted strings. |
| 212 | Xsed="${SED}"' -e 1s/^X//' |
| 213 | sed_quote_subst='s/\([`"$\\]\)/\\\1/g' |
| 214 | |
| 215 | # Same as above, but do not quote variable references. |
| 216 | double_quote_subst='s/\(["`\\]\)/\\\1/g' |
| 217 | |
| 218 | # Re-`\' parameter expansions in output of double_quote_subst that were |
| 219 | # `\'-ed in input to the same. If an odd number of `\' preceded a '$' |
| 220 | # in input to double_quote_subst, that '$' was protected from expansion. |
| 221 | # Since each input `\' is now two `\'s, look for any number of runs of |
| 222 | # four `\'s followed by two `\'s and then a '$'. `\' that '$'. |
| 223 | bs='\\' |
| 224 | bs2='\\\\' |
| 225 | bs4='\\\\\\\\' |
| 226 | dollar='\$' |
| 227 | sed_double_backslash="\ |
| 228 | s/$bs4/&\\ |
| 229 | /g |
| 230 | s/^$bs2$dollar/$bs&/ |
| 231 | s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g |
| 232 | s/\n//g" |
| 233 | |
| 234 | # Standard options: |
| 235 | opt_dry_run=false |
| 236 | opt_help=false |
| 237 | opt_quiet=false |
| 238 | opt_verbose=false |
| 239 | opt_warning=: |
| 240 | |
| 241 | # func_echo arg... |
| 242 | # Echo program name prefixed message, along with the current mode |
| 243 | # name if it has been set yet. |
| 244 | func_echo () |
| 245 | { |
| 246 | $ECHO "$progname${mode+: }$mode: $*" |
| 247 | } |
| 248 | |
| 249 | # func_verbose arg... |
| 250 | # Echo program name prefixed message in verbose mode only. |
| 251 | func_verbose () |
| 252 | { |
| 253 | $opt_verbose && func_echo ${1+"$@"} |
| 254 | |
| 255 | # A bug in bash halts the script if the last line of a function |
| 256 | # fails when set -e is in force, so we need another command to |
| 257 | # work around that: |
| 258 | : |
| 259 | } |
| 260 | |
| 261 | # func_error arg... |
| 262 | # Echo program name prefixed message to standard error. |
| 263 | func_error () |
| 264 | { |
| 265 | $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 |
| 266 | } |
| 267 | |
| 268 | # func_warning arg... |
| 269 | # Echo program name prefixed warning message to standard error. |
| 270 | func_warning () |
| 271 | { |
| 272 | $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 |
| 273 | |
| 274 | # bash bug again: |
| 275 | : |
| 276 | } |
| 277 | |
| 278 | # func_fatal_error arg... |
| 279 | # Echo program name prefixed message to standard error, and exit. |
| 280 | func_fatal_error () |
| 281 | { |
| 282 | func_error ${1+"$@"} |
| 283 | exit $EXIT_FAILURE |
| 284 | } |
| 285 | |
| 286 | # func_fatal_help arg... |
| 287 | # Echo program name prefixed message to standard error, followed by |
| 288 | # a help hint, and exit. |
| 289 | func_fatal_help () |
| 290 | { |
| 291 | func_error ${1+"$@"} |
| 292 | func_fatal_error "$help" |
| 293 | } |
| 294 | help="Try \`$progname --help' for more information." ## default |
| 295 | |
| 296 | |
| 297 | # func_grep expression filename |
| 298 | # Check whether EXPRESSION matches any line of FILENAME, without output. |
| 299 | func_grep () |
| 300 | { |
| 301 | $GREP "$1" "$2" >/dev/null 2>&1 |
| 302 | } |
| 303 | |
| 304 | |
| 305 | # func_mkdir_p directory-path |
| 306 | # Make sure the entire path to DIRECTORY-PATH is available. |
| 307 | func_mkdir_p () |
| 308 | { |
| 309 | my_directory_path="$1" |
| 310 | my_dir_list= |
| 311 | |
| 312 | if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then |
| 313 | |
| 314 | # Protect directory names starting with `-' |
| 315 | case $my_directory_path in |
| 316 | -*) my_directory_path="./$my_directory_path" ;; |
| 317 | esac |
| 318 | |
| 319 | # While some portion of DIR does not yet exist... |
| 320 | while test ! -d "$my_directory_path"; do |
| 321 | # ...make a list in topmost first order. Use a colon delimited |
| 322 | # list incase some portion of path contains whitespace. |
| 323 | my_dir_list="$my_directory_path:$my_dir_list" |
| 324 | |
| 325 | # If the last portion added has no slash in it, the list is done |
| 326 | case $my_directory_path in */*) ;; *) break ;; esac |
| 327 | |
| 328 | # ...otherwise throw away the child directory and loop |
| 329 | my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` |
| 330 | done |
| 331 | my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` |
| 332 | |
| 333 | save_mkdir_p_IFS="$IFS"; IFS=':' |
| 334 | for my_dir in $my_dir_list; do |
| 335 | IFS="$save_mkdir_p_IFS" |
| 336 | # mkdir can fail with a `File exist' error if two processes |
| 337 | # try to create one of the directories concurrently. Don't |
| 338 | # stop in that case! |
| 339 | $MKDIR "$my_dir" 2>/dev/null || : |
| 340 | done |
| 341 | IFS="$save_mkdir_p_IFS" |
| 342 | |
| 343 | # Bail out if we (or some other process) failed to create a directory. |
| 344 | test -d "$my_directory_path" || \ |
| 345 | func_fatal_error "Failed to create \`$1'" |
| 346 | fi |
| 347 | } |
| 348 | |
| 349 | |
| 350 | # func_mktempdir [string] |
| 351 | # Make a temporary directory that won't clash with other running |
| 352 | # libtool processes, and avoids race conditions if possible. If |
| 353 | # given, STRING is the basename for that directory. |
| 354 | func_mktempdir () |
| 355 | { |
| 356 | my_template="${TMPDIR-/tmp}/${1-$progname}" |
| 357 | |
| 358 | if test "$opt_dry_run" = ":"; then |
| 359 | # Return a directory name, but don't create it in dry-run mode |
| 360 | my_tmpdir="${my_template}-$$" |
| 361 | else |
| 362 | |
| 363 | # If mktemp works, use that first and foremost |
| 364 | my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` |
| 365 | |
| 366 | if test ! -d "$my_tmpdir"; then |
| 367 | # Failing that, at least try and use $RANDOM to avoid a race |
| 368 | my_tmpdir="${my_template}-${RANDOM-0}$$" |
| 369 | |
| 370 | save_mktempdir_umask=`umask` |
| 371 | umask 0077 |
| 372 | $MKDIR "$my_tmpdir" |
| 373 | umask $save_mktempdir_umask |
| 374 | fi |
| 375 | |
| 376 | # If we're not in dry-run mode, bomb out on failure |
| 377 | test -d "$my_tmpdir" || \ |
| 378 | func_fatal_error "cannot create temporary directory \`$my_tmpdir'" |
| 379 | fi |
| 380 | |
| 381 | $ECHO "X$my_tmpdir" | $Xsed |
| 382 | } |
| 383 | |
| 384 | |
| 385 | # func_quote_for_eval arg |
| 386 | # Aesthetically quote ARG to be evaled later. |
| 387 | # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT |
| 388 | # is double-quoted, suitable for a subsequent eval, whereas |
| 389 | # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters |
| 390 | # which are still active within double quotes backslashified. |
| 391 | func_quote_for_eval () |
| 392 | { |
| 393 | case $1 in |
| 394 | *[\\\`\"\$]*) |
| 395 | func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; |
| 396 | *) |
| 397 | func_quote_for_eval_unquoted_result="$1" ;; |
| 398 | esac |
| 399 | |
| 400 | case $func_quote_for_eval_unquoted_result in |
| 401 | # Double-quote args containing shell metacharacters to delay |
| 402 | # word splitting, command substitution and and variable |
| 403 | # expansion for a subsequent eval. |
| 404 | # Many Bourne shells cannot handle close brackets correctly |
| 405 | # in scan sets, so we specify it separately. |
| 406 | *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| 407 | func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" |
| 408 | ;; |
| 409 | *) |
| 410 | func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" |
| 411 | esac |
| 412 | } |
| 413 | |
| 414 | |
| 415 | # func_quote_for_expand arg |
| 416 | # Aesthetically quote ARG to be evaled later; same as above, |
| 417 | # but do not quote variable references. |
| 418 | func_quote_for_expand () |
| 419 | { |
| 420 | case $1 in |
| 421 | *[\\\`\"]*) |
| 422 | my_arg=`$ECHO "X$1" | $Xsed \ |
| 423 | -e "$double_quote_subst" -e "$sed_double_backslash"` ;; |
| 424 | *) |
| 425 | my_arg="$1" ;; |
| 426 | esac |
| 427 | |
| 428 | case $my_arg in |
| 429 | # Double-quote args containing shell metacharacters to delay |
| 430 | # word splitting and command substitution for a subsequent eval. |
| 431 | # Many Bourne shells cannot handle close brackets correctly |
| 432 | # in scan sets, so we specify it separately. |
| 433 | *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") |
| 434 | my_arg="\"$my_arg\"" |
| 435 | ;; |
| 436 | esac |
| 437 | |
| 438 | func_quote_for_expand_result="$my_arg" |
| 439 | } |
| 440 | |
| 441 | |
| 442 | # func_show_eval cmd [fail_exp] |
| 443 | # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is |
| 444 | # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP |
| 445 | # is given, then evaluate it. |
| 446 | func_show_eval () |
| 447 | { |
| 448 | my_cmd="$1" |
| 449 | my_fail_exp="${2-:}" |
| 450 | |
| 451 | ${opt_silent-false} || { |
| 452 | func_quote_for_expand "$my_cmd" |
| 453 | eval "func_echo $func_quote_for_expand_result" |
| 454 | } |
| 455 | |
| 456 | if ${opt_dry_run-false}; then :; else |
| 457 | eval "$my_cmd" |
| 458 | my_status=$? |
| 459 | if test "$my_status" -eq 0; then :; else |
| 460 | eval "(exit $my_status); $my_fail_exp" |
| 461 | fi |
| 462 | fi |
| 463 | } |
| 464 | |
| 465 | |
| 466 | # func_show_eval_locale cmd [fail_exp] |
| 467 | # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is |
| 468 | # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP |
| 469 | # is given, then evaluate it. Use the saved locale for evaluation. |
| 470 | func_show_eval_locale () |
| 471 | { |
| 472 | my_cmd="$1" |
| 473 | my_fail_exp="${2-:}" |
| 474 | |
| 475 | ${opt_silent-false} || { |
| 476 | func_quote_for_expand "$my_cmd" |
| 477 | eval "func_echo $func_quote_for_expand_result" |
| 478 | } |
| 479 | |
| 480 | if ${opt_dry_run-false}; then :; else |
| 481 | eval "$lt_user_locale |
| 482 | $my_cmd" |
| 483 | my_status=$? |
| 484 | eval "$lt_safe_locale" |
| 485 | if test "$my_status" -eq 0; then :; else |
| 486 | eval "(exit $my_status); $my_fail_exp" |
| 487 | fi |
| 488 | fi |
| 489 | } |
| 490 | |
| 491 | |
| 492 | |
| 493 | |
| 494 | |
| 495 | # func_version |
| 496 | # Echo version message to standard output and exit. |
| 497 | func_version () |
| 498 | { |
| 499 | $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { |
| 500 | s/^# // |
| 501 | s/^# *$// |
| 502 | s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ |
| 503 | p |
| 504 | }' < "$progpath" |
| 505 | exit $? |
| 506 | } |
| 507 | |
| 508 | # func_usage |
| 509 | # Echo short help message to standard output and exit. |
| 510 | func_usage () |
| 511 | { |
| 512 | $SED -n '/^# Usage:/,/# -h/ { |
| 513 | s/^# // |
| 514 | s/^# *$// |
| 515 | s/\$progname/'$progname'/ |
| 516 | p |
| 517 | }' < "$progpath" |
| 518 | $ECHO |
| 519 | $ECHO "run \`$progname --help | more' for full usage" |
| 520 | exit $? |
| 521 | } |
| 522 | |
| 523 | # func_help |
| 524 | # Echo long help message to standard output and exit. |
| 525 | func_help () |
| 526 | { |
| 527 | $SED -n '/^# Usage:/,/# Report bugs to/ { |
| 528 | s/^# // |
| 529 | s/^# *$// |
| 530 | s*\$progname*'$progname'* |
| 531 | s*\$host*'"$host"'* |
| 532 | s*\$SHELL*'"$SHELL"'* |
| 533 | s*\$LTCC*'"$LTCC"'* |
| 534 | s*\$LTCFLAGS*'"$LTCFLAGS"'* |
| 535 | s*\$LD*'"$LD"'* |
| 536 | s/\$with_gnu_ld/'"$with_gnu_ld"'/ |
| 537 | s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ |
| 538 | s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ |
| 539 | p |
| 540 | }' < "$progpath" |
| 541 | exit $? |
| 542 | } |
| 543 | |
| 544 | # func_missing_arg argname |
| 545 | # Echo program name prefixed message to standard error and set global |
| 546 | # exit_cmd. |
| 547 | func_missing_arg () |
| 548 | { |
| 549 | func_error "missing argument for $1" |
| 550 | exit_cmd=exit |
| 551 | } |
| 552 | |
| 553 | exit_cmd=: |
| 554 | |
| 555 | |
| 556 | |
| 557 | |
| 558 | |
| 559 | # Check that we have a working $ECHO. |
| 560 | if test "X$1" = X--no-reexec; then |
| 561 | # Discard the --no-reexec flag, and continue. |
| 562 | shift |
| 563 | elif test "X$1" = X--fallback-echo; then |
| 564 | # Avoid inline document here, it may be left over |
| 565 | : |
| 566 | elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then |
| 567 | # Yippee, $ECHO works! |
| 568 | : |
| 569 | else |
| 570 | # Restart under the correct shell, and then maybe $ECHO will work. |
| 571 | exec $SHELL "$progpath" --no-reexec ${1+"$@"} |
| 572 | fi |
| 573 | |
| 574 | if test "X$1" = X--fallback-echo; then |
| 575 | # used as fallback echo |
| 576 | shift |
| 577 | cat <<EOF |
| 578 | $* |
| 579 | EOF |
| 580 | exit $EXIT_SUCCESS |
| 581 | fi |
| 582 | |
| 583 | magic="%%%MAGIC variable%%%" |
| 584 | magic_exe="%%%MAGIC EXE variable%%%" |
| 585 | |
| 586 | # Global variables. |
| 587 | # $mode is unset |
| 588 | nonopt= |
| 589 | execute_dlfiles= |
| 590 | preserve_args= |
| 591 | lo2o="s/\\.lo\$/.${objext}/" |
| 592 | o2lo="s/\\.${objext}\$/.lo/" |
| 593 | extracted_archives= |
| 594 | extracted_serial=0 |
| 595 | |
| 596 | opt_dry_run=false |
| 597 | opt_duplicate_deps=false |
| 598 | opt_silent=false |
| 599 | opt_debug=: |
| 600 | |
| 601 | # If this variable is set in any of the actions, the command in it |
| 602 | # will be execed at the end. This prevents here-documents from being |
| 603 | # left over by shells. |
| 604 | exec_cmd= |
| 605 | |
| 606 | # func_fatal_configuration arg... |
| 607 | # Echo program name prefixed message to standard error, followed by |
| 608 | # a configuration failure hint, and exit. |
| 609 | func_fatal_configuration () |
| 610 | { |
| 611 | func_error ${1+"$@"} |
| 612 | func_error "See the $PACKAGE documentation for more information." |
| 613 | func_fatal_error "Fatal configuration error." |
| 614 | } |
| 615 | |
| 616 | |
| 617 | # func_config |
| 618 | # Display the configuration for all the tags in this script. |
| 619 | func_config () |
| 620 | { |
| 621 | re_begincf='^# ### BEGIN LIBTOOL' |
| 622 | re_endcf='^# ### END LIBTOOL' |
| 623 | |
| 624 | # Default configuration. |
| 625 | $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" |
| 626 | |
| 627 | # Now print the configurations for the tags. |
| 628 | for tagname in $taglist; do |
| 629 | $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" |
| 630 | done |
| 631 | |
| 632 | exit $? |
| 633 | } |
| 634 | |
| 635 | # func_features |
| 636 | # Display the features supported by this script. |
| 637 | func_features () |
| 638 | { |
| 639 | $ECHO "host: $host" |
| 640 | if test "$build_libtool_libs" = yes; then |
| 641 | $ECHO "enable shared libraries" |
| 642 | else |
| 643 | $ECHO "disable shared libraries" |
| 644 | fi |
| 645 | if test "$build_old_libs" = yes; then |
| 646 | $ECHO "enable static libraries" |
| 647 | else |
| 648 | $ECHO "disable static libraries" |
| 649 | fi |
| 650 | |
| 651 | exit $? |
| 652 | } |
| 653 | |
| 654 | # func_enable_tag tagname |
| 655 | # Verify that TAGNAME is valid, and either flag an error and exit, or |
| 656 | # enable the TAGNAME tag. We also add TAGNAME to the global $taglist |
| 657 | # variable here. |
| 658 | func_enable_tag () |
| 659 | { |
| 660 | # Global variable: |
| 661 | tagname="$1" |
| 662 | |
| 663 | re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" |
| 664 | re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" |
| 665 | sed_extractcf="/$re_begincf/,/$re_endcf/p" |
| 666 | |
| 667 | # Validate tagname. |
| 668 | case $tagname in |
| 669 | *[!-_A-Za-z0-9,/]*) |
| 670 | func_fatal_error "invalid tag name: $tagname" |
| 671 | ;; |
| 672 | esac |
| 673 | |
| 674 | # Don't test for the "default" C tag, as we know it's |
| 675 | # there but not specially marked. |
| 676 | case $tagname in |
| 677 | CC) ;; |
| 678 | *) |
| 679 | if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then |
| 680 | taglist="$taglist $tagname" |
| 681 | |
| 682 | # Evaluate the configuration. Be careful to quote the path |
| 683 | # and the sed script, to avoid splitting on whitespace, but |
| 684 | # also don't use non-portable quotes within backquotes within |
| 685 | # quotes we have to do it in 2 steps: |
| 686 | extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` |
| 687 | eval "$extractedcf" |
| 688 | else |
| 689 | func_error "ignoring unknown tag $tagname" |
| 690 | fi |
| 691 | ;; |
| 692 | esac |
| 693 | } |
| 694 | |
| 695 | # Parse options once, thoroughly. This comes as soon as possible in |
| 696 | # the script to make things like `libtool --version' happen quickly. |
| 697 | { |
| 698 | |
| 699 | # Shorthand for --mode=foo, only valid as the first argument |
| 700 | case $1 in |
| 701 | clean|clea|cle|cl) |
| 702 | shift; set dummy --mode clean ${1+"$@"}; shift |
| 703 | ;; |
| 704 | compile|compil|compi|comp|com|co|c) |
| 705 | shift; set dummy --mode compile ${1+"$@"}; shift |
| 706 | ;; |
| 707 | execute|execut|execu|exec|exe|ex|e) |
| 708 | shift; set dummy --mode execute ${1+"$@"}; shift |
| 709 | ;; |
| 710 | finish|finis|fini|fin|fi|f) |
| 711 | shift; set dummy --mode finish ${1+"$@"}; shift |
| 712 | ;; |
| 713 | install|instal|insta|inst|ins|in|i) |
| 714 | shift; set dummy --mode install ${1+"$@"}; shift |
| 715 | ;; |
| 716 | link|lin|li|l) |
| 717 | shift; set dummy --mode link ${1+"$@"}; shift |
| 718 | ;; |
| 719 | uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) |
| 720 | shift; set dummy --mode uninstall ${1+"$@"}; shift |
| 721 | ;; |
| 722 | esac |
| 723 | |
| 724 | # Parse non-mode specific arguments: |
| 725 | while test "$#" -gt 0; do |
| 726 | opt="$1" |
| 727 | shift |
| 728 | |
| 729 | case $opt in |
| 730 | --config) func_config ;; |
| 731 | |
| 732 | --debug) preserve_args="$preserve_args $opt" |
| 733 | func_echo "enabling shell trace mode" |
| 734 | opt_debug='set -x' |
| 735 | $opt_debug |
| 736 | ;; |
| 737 | |
| 738 | -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break |
| 739 | execute_dlfiles="$execute_dlfiles $1" |
| 740 | shift |
| 741 | ;; |
| 742 | |
| 743 | --dry-run | -n) opt_dry_run=: ;; |
| 744 | --features) func_features ;; |
| 745 | --finish) mode="finish" ;; |
| 746 | |
| 747 | --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break |
| 748 | case $1 in |
| 749 | # Valid mode arguments: |
| 750 | clean) ;; |
| 751 | compile) ;; |
| 752 | execute) ;; |
| 753 | finish) ;; |
| 754 | install) ;; |
| 755 | link) ;; |
| 756 | relink) ;; |
| 757 | uninstall) ;; |
| 758 | |
| 759 | # Catch anything else as an error |
| 760 | *) func_error "invalid argument for $opt" |
| 761 | exit_cmd=exit |
| 762 | break |
| 763 | ;; |
| 764 | esac |
| 765 | |
| 766 | mode="$1" |
| 767 | shift |
| 768 | ;; |
| 769 | |
| 770 | --preserve-dup-deps) |
| 771 | opt_duplicate_deps=: ;; |
| 772 | |
| 773 | --quiet|--silent) preserve_args="$preserve_args $opt" |
| 774 | opt_silent=: |
| 775 | ;; |
| 776 | |
| 777 | --verbose| -v) preserve_args="$preserve_args $opt" |
| 778 | opt_silent=false |
| 779 | ;; |
| 780 | |
| 781 | --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break |
| 782 | preserve_args="$preserve_args $opt $1" |
| 783 | func_enable_tag "$1" # tagname is set here |
| 784 | shift |
| 785 | ;; |
| 786 | |
| 787 | # Separate optargs to long options: |
| 788 | -dlopen=*|--mode=*|--tag=*) |
| 789 | func_opt_split "$opt" |
| 790 | set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} |
| 791 | shift |
| 792 | ;; |
| 793 | |
| 794 | -\?|-h) func_usage ;; |
| 795 | --help) opt_help=: ;; |
| 796 | --version) func_version ;; |
| 797 | |
| 798 | -*) func_fatal_help "unrecognized option \`$opt'" ;; |
| 799 | |
| 800 | *) nonopt="$opt" |
| 801 | break |
| 802 | ;; |
| 803 | esac |
| 804 | done |
| 805 | |
| 806 | |
| 807 | case $host in |
| 808 | *cygwin* | *mingw* | *pw32*) |
| 809 | # don't eliminate duplications in $postdeps and $predeps |
| 810 | opt_duplicate_compiler_generated_deps=: |
| 811 | ;; |
| 812 | *) |
| 813 | opt_duplicate_compiler_generated_deps=$opt_duplicate_deps |
| 814 | ;; |
| 815 | esac |
| 816 | |
| 817 | # Having warned about all mis-specified options, bail out if |
| 818 | # anything was wrong. |
| 819 | $exit_cmd $EXIT_FAILURE |
| 820 | } |
| 821 | |
| 822 | # func_check_version_match |
| 823 | # Ensure that we are using m4 macros, and libtool script from the same |
| 824 | # release of libtool. |
| 825 | func_check_version_match () |
| 826 | { |
| 827 | if test "$package_revision" != "$macro_revision"; then |
| 828 | if test "$VERSION" != "$macro_version"; then |
| 829 | if test -z "$macro_version"; then |
| 830 | cat >&2 <<_LT_EOF |
| 831 | $progname: Version mismatch error. This is $PACKAGE $VERSION, but the |
| 832 | $progname: definition of this LT_INIT comes from an older release. |
| 833 | $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION |
| 834 | $progname: and run autoconf again. |
| 835 | _LT_EOF |
| 836 | else |
| 837 | cat >&2 <<_LT_EOF |
| 838 | $progname: Version mismatch error. This is $PACKAGE $VERSION, but the |
| 839 | $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. |
| 840 | $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION |
| 841 | $progname: and run autoconf again. |
| 842 | _LT_EOF |
| 843 | fi |
| 844 | else |
| 845 | cat >&2 <<_LT_EOF |
| 846 | $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, |
| 847 | $progname: but the definition of this LT_INIT comes from revision $macro_revision. |
| 848 | $progname: You should recreate aclocal.m4 with macros from revision $package_revision |
| 849 | $progname: of $PACKAGE $VERSION and run autoconf again. |
| 850 | _LT_EOF |
| 851 | fi |
| 852 | |
| 853 | exit $EXIT_MISMATCH |
| 854 | fi |
| 855 | } |
| 856 | |
| 857 | |
| 858 | ## ----------- ## |
| 859 | ## Main. ## |
| 860 | ## ----------- ## |
| 861 | |
| 862 | $opt_help || { |
| 863 | # Sanity checks first: |
| 864 | func_check_version_match |
| 865 | |
| 866 | if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then |
| 867 | func_fatal_configuration "not configured to build any kind of library" |
| 868 | fi |
| 869 | |
| 870 | test -z "$mode" && func_fatal_error "error: you must specify a MODE." |
| 871 | |
| 872 | |
| 873 | # Darwin sucks |
| 874 | eval std_shrext=\"$shrext_cmds\" |
| 875 | |
| 876 | |
| 877 | # Only execute mode is allowed to have -dlopen flags. |
| 878 | if test -n "$execute_dlfiles" && test "$mode" != execute; then |
| 879 | func_error "unrecognized option \`-dlopen'" |
| 880 | $ECHO "$help" 1>&2 |
| 881 | exit $EXIT_FAILURE |
| 882 | fi |
| 883 | |
| 884 | # Change the help message to a mode-specific one. |
| 885 | generic_help="$help" |
| 886 | help="Try \`$progname --help --mode=$mode' for more information." |
| 887 | } |
| 888 | |
| 889 | |
| 890 | # func_lalib_p file |
| 891 | # True iff FILE is a libtool `.la' library or `.lo' object file. |
| 892 | # This function is only a basic sanity check; it will hardly flush out |
| 893 | # determined imposters. |
| 894 | func_lalib_p () |
| 895 | { |
| 896 | $SED -e 4q "$1" 2>/dev/null \ |
| 897 | | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 |
| 898 | } |
| 899 | |
| 900 | # func_lalib_unsafe_p file |
| 901 | # True iff FILE is a libtool `.la' library or `.lo' object file. |
| 902 | # This function implements the same check as func_lalib_p without |
| 903 | # resorting to external programs. To this end, it redirects stdin and |
| 904 | # closes it afterwards, without saving the original file descriptor. |
| 905 | # As a safety measure, use it only where a negative result would be |
| 906 | # fatal anyway. Works if `file' does not exist. |
| 907 | func_lalib_unsafe_p () |
| 908 | { |
| 909 | lalib_p=no |
| 910 | if test -r "$1" && exec 5<&0 <"$1"; then |
| 911 | for lalib_p_l in 1 2 3 4 |
| 912 | do |
| 913 | read lalib_p_line |
| 914 | case "$lalib_p_line" in |
| 915 | \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; |
| 916 | esac |
| 917 | done |
| 918 | exec 0<&5 5<&- |
| 919 | fi |
| 920 | test "$lalib_p" = yes |
| 921 | } |
| 922 | |
| 923 | # func_ltwrapper_script_p file |
| 924 | # True iff FILE is a libtool wrapper script |
| 925 | # This function is only a basic sanity check; it will hardly flush out |
| 926 | # determined imposters. |
| 927 | func_ltwrapper_script_p () |
| 928 | { |
| 929 | func_lalib_p "$1" |
| 930 | } |
| 931 | |
| 932 | # func_ltwrapper_executable_p file |
| 933 | # True iff FILE is a libtool wrapper executable |
| 934 | # This function is only a basic sanity check; it will hardly flush out |
| 935 | # determined imposters. |
| 936 | func_ltwrapper_executable_p () |
| 937 | { |
| 938 | func_ltwrapper_exec_suffix= |
| 939 | case $1 in |
| 940 | *.exe) ;; |
| 941 | *) func_ltwrapper_exec_suffix=.exe ;; |
| 942 | esac |
| 943 | $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 |
| 944 | } |
| 945 | |
| 946 | # func_ltwrapper_scriptname file |
| 947 | # Assumes file is an ltwrapper_executable |
| 948 | # uses $file to determine the appropriate filename for a |
| 949 | # temporary ltwrapper_script. |
| 950 | func_ltwrapper_scriptname () |
| 951 | { |
| 952 | func_ltwrapper_scriptname_result="" |
| 953 | if func_ltwrapper_executable_p "$1"; then |
| 954 | func_dirname_and_basename "$1" "" "." |
| 955 | func_stripname '' '.exe' "$func_basename_result" |
| 956 | func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" |
| 957 | fi |
| 958 | } |
| 959 | |
| 960 | # func_ltwrapper_p file |
| 961 | # True iff FILE is a libtool wrapper script or wrapper executable |
| 962 | # This function is only a basic sanity check; it will hardly flush out |
| 963 | # determined imposters. |
| 964 | func_ltwrapper_p () |
| 965 | { |
| 966 | func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" |
| 967 | } |
| 968 | |
| 969 | |
| 970 | # func_execute_cmds commands fail_cmd |
| 971 | # Execute tilde-delimited COMMANDS. |
| 972 | # If FAIL_CMD is given, eval that upon failure. |
| 973 | # FAIL_CMD may read-access the current command in variable CMD! |
| 974 | func_execute_cmds () |
| 975 | { |
| 976 | $opt_debug |
| 977 | save_ifs=$IFS; IFS='~' |
| 978 | for cmd in $1; do |
| 979 | IFS=$save_ifs |
| 980 | eval cmd=\"$cmd\" |
| 981 | func_show_eval "$cmd" "${2-:}" |
| 982 | done |
| 983 | IFS=$save_ifs |
| 984 | } |
| 985 | |
| 986 | |
| 987 | # func_source file |
| 988 | # Source FILE, adding directory component if necessary. |
| 989 | # Note that it is not necessary on cygwin/mingw to append a dot to |
| 990 | # FILE even if both FILE and FILE.exe exist: automatic-append-.exe |
| 991 | # behavior happens only for exec(3), not for open(2)! Also, sourcing |
| 992 | # `FILE.' does not work on cygwin managed mounts. |
| 993 | func_source () |
| 994 | { |
| 995 | $opt_debug |
| 996 | case $1 in |
| 997 | */* | *\\*) . "$1" ;; |
| 998 | *) . "./$1" ;; |
| 999 | esac |
| 1000 | } |
| 1001 | |
| 1002 | |
| 1003 | # func_infer_tag arg |
| 1004 | # Infer tagged configuration to use if any are available and |
| 1005 | # if one wasn't chosen via the "--tag" command line option. |
| 1006 | # Only attempt this if the compiler in the base compile |
| 1007 | # command doesn't match the default compiler. |
| 1008 | # arg is usually of the form 'gcc ...' |
| 1009 | func_infer_tag () |
| 1010 | { |
| 1011 | $opt_debug |
| 1012 | if test -n "$available_tags" && test -z "$tagname"; then |
| 1013 | CC_quoted= |
| 1014 | for arg in $CC; do |
| 1015 | func_quote_for_eval "$arg" |
| 1016 | CC_quoted="$CC_quoted $func_quote_for_eval_result" |
| 1017 | done |
| 1018 | case $@ in |
| 1019 | # Blanks in the command may have been stripped by the calling shell, |
| 1020 | # but not from the CC environment variable when configure was run. |
| 1021 | " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; |
| 1022 | # Blanks at the start of $base_compile will cause this to fail |
| 1023 | # if we don't check for them as well. |
| 1024 | *) |
| 1025 | for z in $available_tags; do |
| 1026 | if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then |
| 1027 | # Evaluate the configuration. |
| 1028 | eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" |
| 1029 | CC_quoted= |
| 1030 | for arg in $CC; do |
| 1031 | # Double-quote args containing other shell metacharacters. |
| 1032 | func_quote_for_eval "$arg" |
| 1033 | CC_quoted="$CC_quoted $func_quote_for_eval_result" |
| 1034 | done |
| 1035 | case "$@ " in |
| 1036 | " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) |
| 1037 | # The compiler in the base compile command matches |
| 1038 | # the one in the tagged configuration. |
| 1039 | # Assume this is the tagged configuration we want. |
| 1040 | tagname=$z |
| 1041 | break |
| 1042 | ;; |
| 1043 | esac |
| 1044 | fi |
| 1045 | done |
| 1046 | # If $tagname still isn't set, then no tagged configuration |
| 1047 | # was found and let the user know that the "--tag" command |
| 1048 | # line option must be used. |
| 1049 | if test -z "$tagname"; then |
| 1050 | func_echo "unable to infer tagged configuration" |
| 1051 | func_fatal_error "specify a tag with \`--tag'" |
| 1052 | # else |
| 1053 | # func_verbose "using $tagname tagged configuration" |
| 1054 | fi |
| 1055 | ;; |
| 1056 | esac |
| 1057 | fi |
| 1058 | } |
| 1059 | |
| 1060 | |
| 1061 | |
| 1062 | # func_write_libtool_object output_name pic_name nonpic_name |
| 1063 | # Create a libtool object file (analogous to a ".la" file), |
| 1064 | # but don't create it if we're doing a dry run. |
| 1065 | func_write_libtool_object () |
| 1066 | { |
| 1067 | write_libobj=${1} |
| 1068 | if test "$build_libtool_libs" = yes; then |
| 1069 | write_lobj=\'${2}\' |
| 1070 | else |
| 1071 | write_lobj=none |
| 1072 | fi |
| 1073 | |
| 1074 | if test "$build_old_libs" = yes; then |
| 1075 | write_oldobj=\'${3}\' |
| 1076 | else |
| 1077 | write_oldobj=none |
| 1078 | fi |
| 1079 | |
| 1080 | $opt_dry_run || { |
| 1081 | cat >${write_libobj}T <<EOF |
| 1082 | # $write_libobj - a libtool object file |
| 1083 | # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION |
| 1084 | # |
| 1085 | # Please DO NOT delete this file! |
| 1086 | # It is necessary for linking the library. |
| 1087 | |
| 1088 | # Name of the PIC object. |
| 1089 | pic_object=$write_lobj |
| 1090 | |
| 1091 | # Name of the non-PIC object |
| 1092 | non_pic_object=$write_oldobj |
| 1093 | |
| 1094 | EOF |
| 1095 | $MV "${write_libobj}T" "${write_libobj}" |
| 1096 | } |
| 1097 | } |
| 1098 | |
| 1099 | # func_mode_compile arg... |
| 1100 | func_mode_compile () |
| 1101 | { |
| 1102 | $opt_debug |
| 1103 | # Get the compilation command and the source file. |
| 1104 | base_compile= |
| 1105 | srcfile="$nonopt" # always keep a non-empty value in "srcfile" |
| 1106 | suppress_opt=yes |
| 1107 | suppress_output= |
| 1108 | arg_mode=normal |
| 1109 | libobj= |
| 1110 | later= |
| 1111 | pie_flag= |
| 1112 | |
| 1113 | for arg |
| 1114 | do |
| 1115 | case $arg_mode in |
| 1116 | arg ) |
| 1117 | # do not "continue". Instead, add this to base_compile |
| 1118 | lastarg="$arg" |
| 1119 | arg_mode=normal |
| 1120 | ;; |
| 1121 | |
| 1122 | target ) |
| 1123 | libobj="$arg" |
| 1124 | arg_mode=normal |
| 1125 | continue |
| 1126 | ;; |
| 1127 | |
| 1128 | normal ) |
| 1129 | # Accept any command-line options. |
| 1130 | case $arg in |
| 1131 | -o) |
| 1132 | test -n "$libobj" && \ |
| 1133 | func_fatal_error "you cannot specify \`-o' more than once" |
| 1134 | arg_mode=target |
| 1135 | continue |
| 1136 | ;; |
| 1137 | |
| 1138 | -pie | -fpie | -fPIE) |
| 1139 | pie_flag="$pie_flag $arg" |
| 1140 | continue |
| 1141 | ;; |
| 1142 | |
| 1143 | -shared | -static | -prefer-pic | -prefer-non-pic) |
| 1144 | later="$later $arg" |
| 1145 | continue |
| 1146 | ;; |
| 1147 | |
| 1148 | -no-suppress) |
| 1149 | suppress_opt=no |
| 1150 | continue |
| 1151 | ;; |
| 1152 | |
| 1153 | -Xcompiler) |
| 1154 | arg_mode=arg # the next one goes into the "base_compile" arg list |
| 1155 | continue # The current "srcfile" will either be retained or |
| 1156 | ;; # replaced later. I would guess that would be a bug. |
| 1157 | |
| 1158 | -Wc,*) |
| 1159 | func_stripname '-Wc,' '' "$arg" |
| 1160 | args=$func_stripname_result |
| 1161 | lastarg= |
| 1162 | save_ifs="$IFS"; IFS=',' |
| 1163 | for arg in $args; do |
| 1164 | IFS="$save_ifs" |
| 1165 | func_quote_for_eval "$arg" |
| 1166 | lastarg="$lastarg $func_quote_for_eval_result" |
| 1167 | done |
| 1168 | IFS="$save_ifs" |
| 1169 | func_stripname ' ' '' "$lastarg" |
| 1170 | lastarg=$func_stripname_result |
| 1171 | |
| 1172 | # Add the arguments to base_compile. |
| 1173 | base_compile="$base_compile $lastarg" |
| 1174 | continue |
| 1175 | ;; |
| 1176 | |
| 1177 | *) |
| 1178 | # Accept the current argument as the source file. |
| 1179 | # The previous "srcfile" becomes the current argument. |
| 1180 | # |
| 1181 | lastarg="$srcfile" |
| 1182 | srcfile="$arg" |
| 1183 | ;; |
| 1184 | esac # case $arg |
| 1185 | ;; |
| 1186 | esac # case $arg_mode |
| 1187 | |
| 1188 | # Aesthetically quote the previous argument. |
| 1189 | func_quote_for_eval "$lastarg" |
| 1190 | base_compile="$base_compile $func_quote_for_eval_result" |
| 1191 | done # for arg |
| 1192 | |
| 1193 | case $arg_mode in |
| 1194 | arg) |
| 1195 | func_fatal_error "you must specify an argument for -Xcompile" |
| 1196 | ;; |
| 1197 | target) |
| 1198 | func_fatal_error "you must specify a target with \`-o'" |
| 1199 | ;; |
| 1200 | *) |
| 1201 | # Get the name of the library object. |
| 1202 | test -z "$libobj" && { |
| 1203 | func_basename "$srcfile" |
| 1204 | libobj="$func_basename_result" |
| 1205 | } |
| 1206 | ;; |
| 1207 | esac |
| 1208 | |
| 1209 | # Recognize several different file suffixes. |
| 1210 | # If the user specifies -o file.o, it is replaced with file.lo |
| 1211 | case $libobj in |
| 1212 | *.[cCFSifmso] | \ |
| 1213 | *.ada | *.adb | *.ads | *.asm | \ |
| 1214 | *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ |
| 1215 | *.[fF][09]? | *.for | *.java | *.obj | *.sx) |
| 1216 | func_xform "$libobj" |
| 1217 | libobj=$func_xform_result |
| 1218 | ;; |
| 1219 | esac |
| 1220 | |
| 1221 | case $libobj in |
| 1222 | *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; |
| 1223 | *) |
| 1224 | func_fatal_error "cannot determine name of library object from \`$libobj'" |
| 1225 | ;; |
| 1226 | esac |
| 1227 | |
| 1228 | func_infer_tag $base_compile |
| 1229 | |
| 1230 | for arg in $later; do |
| 1231 | case $arg in |
| 1232 | -shared) |
| 1233 | test "$build_libtool_libs" != yes && \ |
| 1234 | func_fatal_configuration "can not build a shared library" |
| 1235 | build_old_libs=no |
| 1236 | continue |
| 1237 | ;; |
| 1238 | |
| 1239 | -static) |
| 1240 | build_libtool_libs=no |
| 1241 | build_old_libs=yes |
| 1242 | continue |
| 1243 | ;; |
| 1244 | |
| 1245 | -prefer-pic) |
| 1246 | pic_mode=yes |
| 1247 | continue |
| 1248 | ;; |
| 1249 | |
| 1250 | -prefer-non-pic) |
| 1251 | pic_mode=no |
| 1252 | continue |
| 1253 | ;; |
| 1254 | esac |
| 1255 | done |
| 1256 | |
| 1257 | func_quote_for_eval "$libobj" |
| 1258 | test "X$libobj" != "X$func_quote_for_eval_result" \ |
| 1259 | && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ |
| 1260 | && func_warning "libobj name \`$libobj' may not contain shell special characters." |
| 1261 | func_dirname_and_basename "$obj" "/" "" |
| 1262 | objname="$func_basename_result" |
| 1263 | xdir="$func_dirname_result" |
| 1264 | lobj=${xdir}$objdir/$objname |
| 1265 | |
| 1266 | test -z "$base_compile" && \ |
| 1267 | func_fatal_help "you must specify a compilation command" |
| 1268 | |
| 1269 | # Delete any leftover library objects. |
| 1270 | if test "$build_old_libs" = yes; then |
| 1271 | removelist="$obj $lobj $libobj ${libobj}T" |
| 1272 | else |
| 1273 | removelist="$lobj $libobj ${libobj}T" |
| 1274 | fi |
| 1275 | |
| 1276 | # On Cygwin there's no "real" PIC flag so we must build both object types |
| 1277 | case $host_os in |
| 1278 | cygwin* | mingw* | pw32* | os2*) |
| 1279 | pic_mode=default |
| 1280 | ;; |
| 1281 | esac |
| 1282 | if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then |
| 1283 | # non-PIC code in shared libraries is not supported |
| 1284 | pic_mode=default |
| 1285 | fi |
| 1286 | |
| 1287 | # Calculate the filename of the output object if compiler does |
| 1288 | # not support -o with -c |
| 1289 | if test "$compiler_c_o" = no; then |
| 1290 | output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} |
| 1291 | lockfile="$output_obj.lock" |
| 1292 | else |
| 1293 | output_obj= |
| 1294 | need_locks=no |
| 1295 | lockfile= |
| 1296 | fi |
| 1297 | |
| 1298 | # Lock this critical section if it is needed |
| 1299 | # We use this script file to make the link, it avoids creating a new file |
| 1300 | if test "$need_locks" = yes; then |
| 1301 | until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do |
| 1302 | func_echo "Waiting for $lockfile to be removed" |
| 1303 | sleep 2 |
| 1304 | done |
| 1305 | elif test "$need_locks" = warn; then |
| 1306 | if test -f "$lockfile"; then |
| 1307 | $ECHO "\ |
| 1308 | *** ERROR, $lockfile exists and contains: |
| 1309 | `cat $lockfile 2>/dev/null` |
| 1310 | |
| 1311 | This indicates that another process is trying to use the same |
| 1312 | temporary object file, and libtool could not work around it because |
| 1313 | your compiler does not support \`-c' and \`-o' together. If you |
| 1314 | repeat this compilation, it may succeed, by chance, but you had better |
| 1315 | avoid parallel builds (make -j) in this platform, or get a better |
| 1316 | compiler." |
| 1317 | |
| 1318 | $opt_dry_run || $RM $removelist |
| 1319 | exit $EXIT_FAILURE |
| 1320 | fi |
| 1321 | removelist="$removelist $output_obj" |
| 1322 | $ECHO "$srcfile" > "$lockfile" |
| 1323 | fi |
| 1324 | |
| 1325 | $opt_dry_run || $RM $removelist |
| 1326 | removelist="$removelist $lockfile" |
| 1327 | trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 |
| 1328 | |
| 1329 | if test -n "$fix_srcfile_path"; then |
| 1330 | eval srcfile=\"$fix_srcfile_path\" |
| 1331 | fi |
| 1332 | func_quote_for_eval "$srcfile" |
| 1333 | qsrcfile=$func_quote_for_eval_result |
| 1334 | |
| 1335 | # Only build a PIC object if we are building libtool libraries. |
| 1336 | if test "$build_libtool_libs" = yes; then |
| 1337 | # Without this assignment, base_compile gets emptied. |
| 1338 | fbsd_hideous_sh_bug=$base_compile |
| 1339 | |
| 1340 | if test "$pic_mode" != no; then |
| 1341 | command="$base_compile $qsrcfile $pic_flag" |
| 1342 | else |
| 1343 | # Don't build PIC code |
| 1344 | command="$base_compile $qsrcfile" |
| 1345 | fi |
| 1346 | |
| 1347 | func_mkdir_p "$xdir$objdir" |
| 1348 | |
| 1349 | if test -z "$output_obj"; then |
| 1350 | # Place PIC objects in $objdir |
| 1351 | command="$command -o $lobj" |
| 1352 | fi |
| 1353 | |
| 1354 | func_show_eval_locale "$command" \ |
| 1355 | 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' |
| 1356 | |
| 1357 | if test "$need_locks" = warn && |
| 1358 | test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then |
| 1359 | $ECHO "\ |
| 1360 | *** ERROR, $lockfile contains: |
| 1361 | `cat $lockfile 2>/dev/null` |
| 1362 | |
| 1363 | but it should contain: |
| 1364 | $srcfile |
| 1365 | |
| 1366 | This indicates that another process is trying to use the same |
| 1367 | temporary object file, and libtool could not work around it because |
| 1368 | your compiler does not support \`-c' and \`-o' together. If you |
| 1369 | repeat this compilation, it may succeed, by chance, but you had better |
| 1370 | avoid parallel builds (make -j) in this platform, or get a better |
| 1371 | compiler." |
| 1372 | |
| 1373 | $opt_dry_run || $RM $removelist |
| 1374 | exit $EXIT_FAILURE |
| 1375 | fi |
| 1376 | |
| 1377 | # Just move the object if needed, then go on to compile the next one |
| 1378 | if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then |
| 1379 | func_show_eval '$MV "$output_obj" "$lobj"' \ |
| 1380 | 'error=$?; $opt_dry_run || $RM $removelist; exit $error' |
| 1381 | fi |
| 1382 | |
| 1383 | # Allow error messages only from the first compilation. |
| 1384 | if test "$suppress_opt" = yes; then |
| 1385 | suppress_output=' >/dev/null 2>&1' |
| 1386 | fi |
| 1387 | fi |
| 1388 | |
| 1389 | # Only build a position-dependent object if we build old libraries. |
| 1390 | if test "$build_old_libs" = yes; then |
| 1391 | if test "$pic_mode" != yes; then |
| 1392 | # Don't build PIC code |
| 1393 | command="$base_compile $qsrcfile$pie_flag" |
| 1394 | else |
| 1395 | command="$base_compile $qsrcfile $pic_flag" |
| 1396 | fi |
| 1397 | if test "$compiler_c_o" = yes; then |
| 1398 | command="$command -o $obj" |
| 1399 | fi |
| 1400 | |
| 1401 | # Suppress compiler output if we already did a PIC compilation. |
| 1402 | command="$command$suppress_output" |
| 1403 | func_show_eval_locale "$command" \ |
| 1404 | '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' |
| 1405 | |
| 1406 | if test "$need_locks" = warn && |
| 1407 | test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then |
| 1408 | $ECHO "\ |
| 1409 | *** ERROR, $lockfile contains: |
| 1410 | `cat $lockfile 2>/dev/null` |
| 1411 | |
| 1412 | but it should contain: |
| 1413 | $srcfile |
| 1414 | |
| 1415 | This indicates that another process is trying to use the same |
| 1416 | temporary object file, and libtool could not work around it because |
| 1417 | your compiler does not support \`-c' and \`-o' together. If you |
| 1418 | repeat this compilation, it may succeed, by chance, but you had better |
| 1419 | avoid parallel builds (make -j) in this platform, or get a better |
| 1420 | compiler." |
| 1421 | |
| 1422 | $opt_dry_run || $RM $removelist |
| 1423 | exit $EXIT_FAILURE |
| 1424 | fi |
| 1425 | |
| 1426 | # Just move the object if needed |
| 1427 | if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then |
| 1428 | func_show_eval '$MV "$output_obj" "$obj"' \ |
| 1429 | 'error=$?; $opt_dry_run || $RM $removelist; exit $error' |
| 1430 | fi |
| 1431 | fi |
| 1432 | |
| 1433 | $opt_dry_run || { |
| 1434 | func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" |
| 1435 | |
| 1436 | # Unlock the critical section if it was locked |
| 1437 | if test "$need_locks" != no; then |
| 1438 | removelist=$lockfile |
| 1439 | $RM "$lockfile" |
| 1440 | fi |
| 1441 | } |
| 1442 | |
| 1443 | exit $EXIT_SUCCESS |
| 1444 | } |
| 1445 | |
| 1446 | $opt_help || { |
| 1447 | test "$mode" = compile && func_mode_compile ${1+"$@"} |
| 1448 | } |
| 1449 | |
| 1450 | func_mode_help () |
| 1451 | { |
| 1452 | # We need to display help for each of the modes. |
| 1453 | case $mode in |
| 1454 | "") |
| 1455 | # Generic help is extracted from the usage comments |
| 1456 | # at the start of this file. |
| 1457 | func_help |
| 1458 | ;; |
| 1459 | |
| 1460 | clean) |
| 1461 | $ECHO \ |
| 1462 | "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... |
| 1463 | |
| 1464 | Remove files from the build directory. |
| 1465 | |
| 1466 | RM is the name of the program to use to delete files associated with each FILE |
| 1467 | (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed |
| 1468 | to RM. |
| 1469 | |
| 1470 | If FILE is a libtool library, object or program, all the files associated |
| 1471 | with it are deleted. Otherwise, only FILE itself is deleted using RM." |
| 1472 | ;; |
| 1473 | |
| 1474 | compile) |
| 1475 | $ECHO \ |
| 1476 | "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE |
| 1477 | |
| 1478 | Compile a source file into a libtool library object. |
| 1479 | |
| 1480 | This mode accepts the following additional options: |
| 1481 | |
| 1482 | -o OUTPUT-FILE set the output file name to OUTPUT-FILE |
| 1483 | -no-suppress do not suppress compiler output for multiple passes |
| 1484 | -prefer-pic try to building PIC objects only |
| 1485 | -prefer-non-pic try to building non-PIC objects only |
| 1486 | -shared do not build a \`.o' file suitable for static linking |
| 1487 | -static only build a \`.o' file suitable for static linking |
| 1488 | |
| 1489 | COMPILE-COMMAND is a command to be used in creating a \`standard' object file |
| 1490 | from the given SOURCEFILE. |
| 1491 | |
| 1492 | The output file name is determined by removing the directory component from |
| 1493 | SOURCEFILE, then substituting the C source code suffix \`.c' with the |
| 1494 | library object suffix, \`.lo'." |
| 1495 | ;; |
| 1496 | |
| 1497 | execute) |
| 1498 | $ECHO \ |
| 1499 | "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... |
| 1500 | |
| 1501 | Automatically set library path, then run a program. |
| 1502 | |
| 1503 | This mode accepts the following additional options: |
| 1504 | |
| 1505 | -dlopen FILE add the directory containing FILE to the library path |
| 1506 | |
| 1507 | This mode sets the library path environment variable according to \`-dlopen' |
| 1508 | flags. |
| 1509 | |
| 1510 | If any of the ARGS are libtool executable wrappers, then they are translated |
| 1511 | into their corresponding uninstalled binary, and any of their required library |
| 1512 | directories are added to the library path. |
| 1513 | |
| 1514 | Then, COMMAND is executed, with ARGS as arguments." |
| 1515 | ;; |
| 1516 | |
| 1517 | finish) |
| 1518 | $ECHO \ |
| 1519 | "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... |
| 1520 | |
| 1521 | Complete the installation of libtool libraries. |
| 1522 | |
| 1523 | Each LIBDIR is a directory that contains libtool libraries. |
| 1524 | |
| 1525 | The commands that this mode executes may require superuser privileges. Use |
| 1526 | the \`--dry-run' option if you just want to see what would be executed." |
| 1527 | ;; |
| 1528 | |
| 1529 | install) |
| 1530 | $ECHO \ |
| 1531 | "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... |
| 1532 | |
| 1533 | Install executables or libraries. |
| 1534 | |
| 1535 | INSTALL-COMMAND is the installation command. The first component should be |
| 1536 | either the \`install' or \`cp' program. |
| 1537 | |
| 1538 | The following components of INSTALL-COMMAND are treated specially: |
| 1539 | |
| 1540 | -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation |
| 1541 | |
| 1542 | The rest of the components are interpreted as arguments to that command (only |
| 1543 | BSD-compatible install options are recognized)." |
| 1544 | ;; |
| 1545 | |
| 1546 | link) |
| 1547 | $ECHO \ |
| 1548 | "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... |
| 1549 | |
| 1550 | Link object files or libraries together to form another library, or to |
| 1551 | create an executable program. |
| 1552 | |
| 1553 | LINK-COMMAND is a command using the C compiler that you would use to create |
| 1554 | a program from several object files. |
| 1555 | |
| 1556 | The following components of LINK-COMMAND are treated specially: |
| 1557 | |
| 1558 | -all-static do not do any dynamic linking at all |
| 1559 | -avoid-version do not add a version suffix if possible |
| 1560 | -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime |
| 1561 | -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols |
| 1562 | -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) |
| 1563 | -export-symbols SYMFILE |
| 1564 | try to export only the symbols listed in SYMFILE |
| 1565 | -export-symbols-regex REGEX |
| 1566 | try to export only the symbols matching REGEX |
| 1567 | -LLIBDIR search LIBDIR for required installed libraries |
| 1568 | -lNAME OUTPUT-FILE requires the installed library libNAME |
| 1569 | -module build a library that can dlopened |
| 1570 | -no-fast-install disable the fast-install mode |
| 1571 | -no-install link a not-installable executable |
| 1572 | -no-undefined declare that a library does not refer to external symbols |
| 1573 | -o OUTPUT-FILE create OUTPUT-FILE from the specified objects |
| 1574 | -objectlist FILE Use a list of object files found in FILE to specify objects |
| 1575 | -precious-files-regex REGEX |
| 1576 | don't remove output files matching REGEX |
| 1577 | -release RELEASE specify package release information |
| 1578 | -rpath LIBDIR the created library will eventually be installed in LIBDIR |
| 1579 | -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries |
| 1580 | -shared only do dynamic linking of libtool libraries |
| 1581 | -shrext SUFFIX override the standard shared library file extension |
| 1582 | -static do not do any dynamic linking of uninstalled libtool libraries |
| 1583 | -static-libtool-libs |
| 1584 | do not do any dynamic linking of libtool libraries |
| 1585 | -version-info CURRENT[:REVISION[:AGE]] |
| 1586 | specify library version info [each variable defaults to 0] |
| 1587 | -weak LIBNAME declare that the target provides the LIBNAME interface |
| 1588 | |
| 1589 | All other options (arguments beginning with \`-') are ignored. |
| 1590 | |
| 1591 | Every other argument is treated as a filename. Files ending in \`.la' are |
| 1592 | treated as uninstalled libtool libraries, other files are standard or library |
| 1593 | object files. |
| 1594 | |
| 1595 | If the OUTPUT-FILE ends in \`.la', then a libtool library is created, |
| 1596 | only library objects (\`.lo' files) may be specified, and \`-rpath' is |
| 1597 | required, except when creating a convenience library. |
| 1598 | |
| 1599 | If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created |
| 1600 | using \`ar' and \`ranlib', or on Windows using \`lib'. |
| 1601 | |
| 1602 | If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file |
| 1603 | is created, otherwise an executable program is created." |
| 1604 | ;; |
| 1605 | |
| 1606 | uninstall) |
| 1607 | $ECHO \ |
| 1608 | "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... |
| 1609 | |
| 1610 | Remove libraries from an installation directory. |
| 1611 | |
| 1612 | RM is the name of the program to use to delete files associated with each FILE |
| 1613 | (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed |
| 1614 | to RM. |
| 1615 | |
| 1616 | If FILE is a libtool library, all the files associated with it are deleted. |
| 1617 | Otherwise, only FILE itself is deleted using RM." |
| 1618 | ;; |
| 1619 | |
| 1620 | *) |
| 1621 | func_fatal_help "invalid operation mode \`$mode'" |
| 1622 | ;; |
| 1623 | esac |
| 1624 | |
| 1625 | $ECHO |
| 1626 | $ECHO "Try \`$progname --help' for more information about other modes." |
| 1627 | |
| 1628 | exit $? |
| 1629 | } |
| 1630 | |
| 1631 | # Now that we've collected a possible --mode arg, show help if necessary |
| 1632 | $opt_help && func_mode_help |
| 1633 | |
| 1634 | |
| 1635 | # func_mode_execute arg... |
| 1636 | func_mode_execute () |
| 1637 | { |
| 1638 | $opt_debug |
| 1639 | # The first argument is the command name. |
| 1640 | cmd="$nonopt" |
| 1641 | test -z "$cmd" && \ |
| 1642 | func_fatal_help "you must specify a COMMAND" |
| 1643 | |
| 1644 | # Handle -dlopen flags immediately. |
| 1645 | for file in $execute_dlfiles; do |
| 1646 | test -f "$file" \ |
| 1647 | || func_fatal_help "\`$file' is not a file" |
| 1648 | |
| 1649 | dir= |
| 1650 | case $file in |
| 1651 | *.la) |
| 1652 | # Check to see that this really is a libtool archive. |
| 1653 | func_lalib_unsafe_p "$file" \ |
| 1654 | || func_fatal_help "\`$lib' is not a valid libtool archive" |
| 1655 | |
| 1656 | # Read the libtool library. |
| 1657 | dlname= |
| 1658 | library_names= |
| 1659 | func_source "$file" |
| 1660 | |
| 1661 | # Skip this library if it cannot be dlopened. |
| 1662 | if test -z "$dlname"; then |
| 1663 | # Warn if it was a shared library. |
| 1664 | test -n "$library_names" && \ |
| 1665 | func_warning "\`$file' was not linked with \`-export-dynamic'" |
| 1666 | continue |
| 1667 | fi |
| 1668 | |
| 1669 | func_dirname "$file" "" "." |
| 1670 | dir="$func_dirname_result" |
| 1671 | |
| 1672 | if test -f "$dir/$objdir/$dlname"; then |
| 1673 | dir="$dir/$objdir" |
| 1674 | else |
| 1675 | if test ! -f "$dir/$dlname"; then |
| 1676 | func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" |
| 1677 | fi |
| 1678 | fi |
| 1679 | ;; |
| 1680 | |
| 1681 | *.lo) |
| 1682 | # Just add the directory containing the .lo file. |
| 1683 | func_dirname "$file" "" "." |
| 1684 | dir="$func_dirname_result" |
| 1685 | ;; |
| 1686 | |
| 1687 | *) |
| 1688 | func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" |
| 1689 | continue |
| 1690 | ;; |
| 1691 | esac |
| 1692 | |
| 1693 | # Get the absolute pathname. |
| 1694 | absdir=`cd "$dir" && pwd` |
| 1695 | test -n "$absdir" && dir="$absdir" |
| 1696 | |
| 1697 | # Now add the directory to shlibpath_var. |
| 1698 | if eval "test -z \"\$$shlibpath_var\""; then |
| 1699 | eval "$shlibpath_var=\"\$dir\"" |
| 1700 | else |
| 1701 | eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" |
| 1702 | fi |
| 1703 | done |
| 1704 | |
| 1705 | # This variable tells wrapper scripts just to set shlibpath_var |
| 1706 | # rather than running their programs. |
| 1707 | libtool_execute_magic="$magic" |
| 1708 | |
| 1709 | # Check if any of the arguments is a wrapper script. |
| 1710 | args= |
| 1711 | for file |
| 1712 | do |
| 1713 | case $file in |
| 1714 | -*) ;; |
| 1715 | *) |
| 1716 | # Do a test to see if this is really a libtool program. |
| 1717 | if func_ltwrapper_script_p "$file"; then |
| 1718 | func_source "$file" |
| 1719 | # Transform arg to wrapped name. |
| 1720 | file="$progdir/$program" |
| 1721 | elif func_ltwrapper_executable_p "$file"; then |
| 1722 | func_ltwrapper_scriptname "$file" |
| 1723 | func_source "$func_ltwrapper_scriptname_result" |
| 1724 | # Transform arg to wrapped name. |
| 1725 | file="$progdir/$program" |
| 1726 | fi |
| 1727 | ;; |
| 1728 | esac |
| 1729 | # Quote arguments (to preserve shell metacharacters). |
| 1730 | func_quote_for_eval "$file" |
| 1731 | args="$args $func_quote_for_eval_result" |
| 1732 | done |
| 1733 | |
| 1734 | if test "X$opt_dry_run" = Xfalse; then |
| 1735 | if test -n "$shlibpath_var"; then |
| 1736 | # Export the shlibpath_var. |
| 1737 | eval "export $shlibpath_var" |
| 1738 | fi |
| 1739 | |
| 1740 | # Restore saved environment variables |
| 1741 | for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES |
| 1742 | do |
| 1743 | eval "if test \"\${save_$lt_var+set}\" = set; then |
| 1744 | $lt_var=\$save_$lt_var; export $lt_var |
| 1745 | else |
| 1746 | $lt_unset $lt_var |
| 1747 | fi" |
| 1748 | done |
| 1749 | |
| 1750 | # Now prepare to actually exec the command. |
| 1751 | exec_cmd="\$cmd$args" |
| 1752 | else |
| 1753 | # Display what would be done. |
| 1754 | if test -n "$shlibpath_var"; then |
| 1755 | eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" |
| 1756 | $ECHO "export $shlibpath_var" |
| 1757 | fi |
| 1758 | $ECHO "$cmd$args" |
| 1759 | exit $EXIT_SUCCESS |
| 1760 | fi |
| 1761 | } |
| 1762 | |
| 1763 | test "$mode" = execute && func_mode_execute ${1+"$@"} |
| 1764 | |
| 1765 | |
| 1766 | # func_mode_finish arg... |
| 1767 | func_mode_finish () |
| 1768 | { |
| 1769 | $opt_debug |
| 1770 | libdirs="$nonopt" |
| 1771 | admincmds= |
| 1772 | |
| 1773 | if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then |
| 1774 | for dir |
| 1775 | do |
| 1776 | libdirs="$libdirs $dir" |
| 1777 | done |
| 1778 | |
| 1779 | for libdir in $libdirs; do |
| 1780 | if test -n "$finish_cmds"; then |
| 1781 | # Do each command in the finish commands. |
| 1782 | func_execute_cmds "$finish_cmds" 'admincmds="$admincmds |
| 1783 | '"$cmd"'"' |
| 1784 | fi |
| 1785 | if test -n "$finish_eval"; then |
| 1786 | # Do the single finish_eval. |
| 1787 | eval cmds=\"$finish_eval\" |
| 1788 | $opt_dry_run || eval "$cmds" || admincmds="$admincmds |
| 1789 | $cmds" |
| 1790 | fi |
| 1791 | done |
| 1792 | fi |
| 1793 | |
| 1794 | # Exit here if they wanted silent mode. |
| 1795 | $opt_silent && exit $EXIT_SUCCESS |
| 1796 | |
| 1797 | $ECHO "X----------------------------------------------------------------------" | $Xsed |
| 1798 | $ECHO "Libraries have been installed in:" |
| 1799 | for libdir in $libdirs; do |
| 1800 | $ECHO " $libdir" |
| 1801 | done |
| 1802 | $ECHO |
| 1803 | $ECHO "If you ever happen to want to link against installed libraries" |
| 1804 | $ECHO "in a given directory, LIBDIR, you must either use libtool, and" |
| 1805 | $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" |
| 1806 | $ECHO "flag during linking and do at least one of the following:" |
| 1807 | if test -n "$shlibpath_var"; then |
| 1808 | $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" |
| 1809 | $ECHO " during execution" |
| 1810 | fi |
| 1811 | if test -n "$runpath_var"; then |
| 1812 | $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" |
| 1813 | $ECHO " during linking" |
| 1814 | fi |
| 1815 | if test -n "$hardcode_libdir_flag_spec"; then |
| 1816 | libdir=LIBDIR |
| 1817 | eval flag=\"$hardcode_libdir_flag_spec\" |
| 1818 | |
| 1819 | $ECHO " - use the \`$flag' linker flag" |
| 1820 | fi |
| 1821 | if test -n "$admincmds"; then |
| 1822 | $ECHO " - have your system administrator run these commands:$admincmds" |
| 1823 | fi |
| 1824 | if test -f /etc/ld.so.conf; then |
| 1825 | $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" |
| 1826 | fi |
| 1827 | $ECHO |
| 1828 | |
| 1829 | $ECHO "See any operating system documentation about shared libraries for" |
| 1830 | case $host in |
| 1831 | solaris2.[6789]|solaris2.1[0-9]) |
| 1832 | $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" |
| 1833 | $ECHO "pages." |
| 1834 | ;; |
| 1835 | *) |
| 1836 | $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." |
| 1837 | ;; |
| 1838 | esac |
| 1839 | $ECHO "X----------------------------------------------------------------------" | $Xsed |
| 1840 | exit $EXIT_SUCCESS |
| 1841 | } |
| 1842 | |
| 1843 | test "$mode" = finish && func_mode_finish ${1+"$@"} |
| 1844 | |
| 1845 | |
| 1846 | # func_mode_install arg... |
| 1847 | func_mode_install () |
| 1848 | { |
| 1849 | $opt_debug |
| 1850 | # There may be an optional sh(1) argument at the beginning of |
| 1851 | # install_prog (especially on Windows NT). |
| 1852 | if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || |
| 1853 | # Allow the use of GNU shtool's install command. |
| 1854 | $ECHO "X$nonopt" | $GREP shtool >/dev/null; then |
| 1855 | # Aesthetically quote it. |
| 1856 | func_quote_for_eval "$nonopt" |
| 1857 | install_prog="$func_quote_for_eval_result " |
| 1858 | arg=$1 |
| 1859 | shift |
| 1860 | else |
| 1861 | install_prog= |
| 1862 | arg=$nonopt |
| 1863 | fi |
| 1864 | |
| 1865 | # The real first argument should be the name of the installation program. |
| 1866 | # Aesthetically quote it. |
| 1867 | func_quote_for_eval "$arg" |
| 1868 | install_prog="$install_prog$func_quote_for_eval_result" |
| 1869 | |
| 1870 | # We need to accept at least all the BSD install flags. |
| 1871 | dest= |
| 1872 | files= |
| 1873 | opts= |
| 1874 | prev= |
| 1875 | install_type= |
| 1876 | isdir=no |
| 1877 | stripme= |
| 1878 | for arg |
| 1879 | do |
| 1880 | if test -n "$dest"; then |
| 1881 | files="$files $dest" |
| 1882 | dest=$arg |
| 1883 | continue |
| 1884 | fi |
| 1885 | |
| 1886 | case $arg in |
| 1887 | -d) isdir=yes ;; |
| 1888 | -f) |
| 1889 | case " $install_prog " in |
| 1890 | *[\\\ /]cp\ *) ;; |
| 1891 | *) prev=$arg ;; |
| 1892 | esac |
| 1893 | ;; |
| 1894 | -g | -m | -o) |
| 1895 | prev=$arg |
| 1896 | ;; |
| 1897 | -s) |
| 1898 | stripme=" -s" |
| 1899 | continue |
| 1900 | ;; |
| 1901 | -*) |
| 1902 | ;; |
| 1903 | *) |
| 1904 | # If the previous option needed an argument, then skip it. |
| 1905 | if test -n "$prev"; then |
| 1906 | prev= |
| 1907 | else |
| 1908 | dest=$arg |
| 1909 | continue |
| 1910 | fi |
| 1911 | ;; |
| 1912 | esac |
| 1913 | |
| 1914 | # Aesthetically quote the argument. |
| 1915 | func_quote_for_eval "$arg" |
| 1916 | install_prog="$install_prog $func_quote_for_eval_result" |
| 1917 | done |
| 1918 | |
| 1919 | test -z "$install_prog" && \ |
| 1920 | func_fatal_help "you must specify an install program" |
| 1921 | |
| 1922 | test -n "$prev" && \ |
| 1923 | func_fatal_help "the \`$prev' option requires an argument" |
| 1924 | |
| 1925 | if test -z "$files"; then |
| 1926 | if test -z "$dest"; then |
| 1927 | func_fatal_help "no file or destination specified" |
| 1928 | else |
| 1929 | func_fatal_help "you must specify a destination" |
| 1930 | fi |
| 1931 | fi |
| 1932 | |
| 1933 | # Strip any trailing slash from the destination. |
| 1934 | func_stripname '' '/' "$dest" |
| 1935 | dest=$func_stripname_result |
| 1936 | |
| 1937 | # Check to see that the destination is a directory. |
| 1938 | test -d "$dest" && isdir=yes |
| 1939 | if test "$isdir" = yes; then |
| 1940 | destdir="$dest" |
| 1941 | destname= |
| 1942 | else |
| 1943 | func_dirname_and_basename "$dest" "" "." |
| 1944 | destdir="$func_dirname_result" |
| 1945 | destname="$func_basename_result" |
| 1946 | |
| 1947 | # Not a directory, so check to see that there is only one file specified. |
| 1948 | set dummy $files; shift |
| 1949 | test "$#" -gt 1 && \ |
| 1950 | func_fatal_help "\`$dest' is not a directory" |
| 1951 | fi |
| 1952 | case $destdir in |
| 1953 | [\\/]* | [A-Za-z]:[\\/]*) ;; |
| 1954 | *) |
| 1955 | for file in $files; do |
| 1956 | case $file in |
| 1957 | *.lo) ;; |
| 1958 | *) |
| 1959 | func_fatal_help "\`$destdir' must be an absolute directory name" |
| 1960 | ;; |
| 1961 | esac |
| 1962 | done |
| 1963 | ;; |
| 1964 | esac |
| 1965 | |
| 1966 | # This variable tells wrapper scripts just to set variables rather |
| 1967 | # than running their programs. |
| 1968 | libtool_install_magic="$magic" |
| 1969 | |
| 1970 | staticlibs= |
| 1971 | future_libdirs= |
| 1972 | current_libdirs= |
| 1973 | for file in $files; do |
| 1974 | |
| 1975 | # Do each installation. |
| 1976 | case $file in |
| 1977 | *.$libext) |
| 1978 | # Do the static libraries later. |
| 1979 | staticlibs="$staticlibs $file" |
| 1980 | ;; |
| 1981 | |
| 1982 | *.la) |
| 1983 | # Check to see that this really is a libtool archive. |
| 1984 | func_lalib_unsafe_p "$file" \ |
| 1985 | || func_fatal_help "\`$file' is not a valid libtool archive" |
| 1986 | |
| 1987 | library_names= |
| 1988 | old_library= |
| 1989 | relink_command= |
| 1990 | func_source "$file" |
| 1991 | |
| 1992 | # Add the libdir to current_libdirs if it is the destination. |
| 1993 | if test "X$destdir" = "X$libdir"; then |
| 1994 | case "$current_libdirs " in |
| 1995 | *" $libdir "*) ;; |
| 1996 | *) current_libdirs="$current_libdirs $libdir" ;; |
| 1997 | esac |
| 1998 | else |
| 1999 | # Note the libdir as a future libdir. |
| 2000 | case "$future_libdirs " in |
| 2001 | *" $libdir "*) ;; |
| 2002 | *) future_libdirs="$future_libdirs $libdir" ;; |
| 2003 | esac |
| 2004 | fi |
| 2005 | |
| 2006 | func_dirname "$file" "/" "" |
| 2007 | dir="$func_dirname_result" |
| 2008 | dir="$dir$objdir" |
| 2009 | |
| 2010 | if test -n "$relink_command"; then |
| 2011 | # Determine the prefix the user has applied to our future dir. |
| 2012 | inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` |
| 2013 | |
| 2014 | # Don't allow the user to place us outside of our expected |
| 2015 | # location b/c this prevents finding dependent libraries that |
| 2016 | # are installed to the same prefix. |
| 2017 | # At present, this check doesn't affect windows .dll's that |
| 2018 | # are installed into $libdir/../bin (currently, that works fine) |
| 2019 | # but it's something to keep an eye on. |
| 2020 | test "$inst_prefix_dir" = "$destdir" && \ |
| 2021 | func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" |
| 2022 | |
| 2023 | if test -n "$inst_prefix_dir"; then |
| 2024 | # Stick the inst_prefix_dir data into the link command. |
| 2025 | relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` |
| 2026 | else |
| 2027 | relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` |
| 2028 | fi |
| 2029 | |
| 2030 | func_warning "relinking \`$file'" |
| 2031 | func_show_eval "$relink_command" \ |
| 2032 | 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' |
| 2033 | fi |
| 2034 | |
| 2035 | # See the names of the shared library. |
| 2036 | set dummy $library_names; shift |
| 2037 | if test -n "$1"; then |
| 2038 | realname="$1" |
| 2039 | shift |
| 2040 | |
| 2041 | srcname="$realname" |
| 2042 | test -n "$relink_command" && srcname="$realname"T |
| 2043 | |
| 2044 | # Install the shared library and build the symlinks. |
| 2045 | func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ |
| 2046 | 'exit $?' |
| 2047 | tstripme="$stripme" |
| 2048 | case $host_os in |
| 2049 | cygwin* | mingw* | pw32*) |
| 2050 | case $realname in |
| 2051 | *.dll.a) |
| 2052 | tstripme="" |
| 2053 | ;; |
| 2054 | esac |
| 2055 | ;; |
| 2056 | esac |
| 2057 | if test -n "$tstripme" && test -n "$striplib"; then |
| 2058 | func_show_eval "$striplib $destdir/$realname" 'exit $?' |
| 2059 | fi |
| 2060 | |
| 2061 | if test "$#" -gt 0; then |
| 2062 | # Delete the old symlinks, and create new ones. |
| 2063 | # Try `ln -sf' first, because the `ln' binary might depend on |
| 2064 | # the symlink we replace! Solaris /bin/ln does not understand -f, |
| 2065 | # so we also need to try rm && ln -s. |
| 2066 | for linkname |
| 2067 | do |
| 2068 | test "$linkname" != "$realname" \ |
| 2069 | && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" |
| 2070 | done |
| 2071 | fi |
| 2072 | |
| 2073 | # Do each command in the postinstall commands. |
| 2074 | lib="$destdir/$realname" |
| 2075 | func_execute_cmds "$postinstall_cmds" 'exit $?' |
| 2076 | fi |
| 2077 | |
| 2078 | # Install the pseudo-library for information purposes. |
| 2079 | func_basename "$file" |
| 2080 | name="$func_basename_result" |
| 2081 | instname="$dir/$name"i |
| 2082 | func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' |
| 2083 | |
| 2084 | # Maybe install the static library, too. |
| 2085 | test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" |
| 2086 | ;; |
| 2087 | |
| 2088 | *.lo) |
| 2089 | # Install (i.e. copy) a libtool object. |
| 2090 | |
| 2091 | # Figure out destination file name, if it wasn't already specified. |
| 2092 | if test -n "$destname"; then |
| 2093 | destfile="$destdir/$destname" |
| 2094 | else |
| 2095 | func_basename "$file" |
| 2096 | destfile="$func_basename_result" |
| 2097 | destfile="$destdir/$destfile" |
| 2098 | fi |
| 2099 | |
| 2100 | # Deduce the name of the destination old-style object file. |
| 2101 | case $destfile in |
| 2102 | *.lo) |
| 2103 | func_lo2o "$destfile" |
| 2104 | staticdest=$func_lo2o_result |
| 2105 | ;; |
| 2106 | *.$objext) |
| 2107 | staticdest="$destfile" |
| 2108 | destfile= |
| 2109 | ;; |
| 2110 | *) |
| 2111 | func_fatal_help "cannot copy a libtool object to \`$destfile'" |
| 2112 | ;; |
| 2113 | esac |
| 2114 | |
| 2115 | # Install the libtool object if requested. |
| 2116 | test -n "$destfile" && \ |
| 2117 | func_show_eval "$install_prog $file $destfile" 'exit $?' |
| 2118 | |
| 2119 | # Install the old object if enabled. |
| 2120 | if test "$build_old_libs" = yes; then |
| 2121 | # Deduce the name of the old-style object file. |
| 2122 | func_lo2o "$file" |
| 2123 | staticobj=$func_lo2o_result |
| 2124 | func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' |
| 2125 | fi |
| 2126 | exit $EXIT_SUCCESS |
| 2127 | ;; |
| 2128 | |
| 2129 | *) |
| 2130 | # Figure out destination file name, if it wasn't already specified. |
| 2131 | if test -n "$destname"; then |
| 2132 | destfile="$destdir/$destname" |
| 2133 | else |
| 2134 | func_basename "$file" |
| 2135 | destfile="$func_basename_result" |
| 2136 | destfile="$destdir/$destfile" |
| 2137 | fi |
| 2138 | |
| 2139 | # If the file is missing, and there is a .exe on the end, strip it |
| 2140 | # because it is most likely a libtool script we actually want to |
| 2141 | # install |
| 2142 | stripped_ext="" |
| 2143 | case $file in |
| 2144 | *.exe) |
| 2145 | if test ! -f "$file"; then |
| 2146 | func_stripname '' '.exe' "$file" |
| 2147 | file=$func_stripname_result |
| 2148 | stripped_ext=".exe" |
| 2149 | fi |
| 2150 | ;; |
| 2151 | esac |
| 2152 | |
| 2153 | # Do a test to see if this is really a libtool program. |
| 2154 | case $host in |
| 2155 | *cygwin*|*mingw*) |
| 2156 | if func_ltwrapper_executable_p "$file"; then |
| 2157 | func_ltwrapper_scriptname "$file" |
| 2158 | wrapper=$func_ltwrapper_scriptname_result |
| 2159 | else |
| 2160 | func_stripname '' '.exe' "$file" |
| 2161 | wrapper=$func_stripname_result |
| 2162 | fi |
| 2163 | ;; |
| 2164 | *) |
| 2165 | wrapper=$file |
| 2166 | ;; |
| 2167 | esac |
| 2168 | if func_ltwrapper_script_p "$wrapper"; then |
| 2169 | notinst_deplibs= |
| 2170 | relink_command= |
| 2171 | |
| 2172 | func_source "$wrapper" |
| 2173 | |
| 2174 | # Check the variables that should have been set. |
| 2175 | test -z "$generated_by_libtool_version" && \ |
| 2176 | func_fatal_error "invalid libtool wrapper script \`$wrapper'" |
| 2177 | |
| 2178 | finalize=yes |
| 2179 | for lib in $notinst_deplibs; do |
| 2180 | # Check to see that each library is installed. |
| 2181 | libdir= |
| 2182 | if test -f "$lib"; then |
| 2183 | func_source "$lib" |
| 2184 | fi |
| 2185 | libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test |
| 2186 | if test -n "$libdir" && test ! -f "$libfile"; then |
| 2187 | func_warning "\`$lib' has not been installed in \`$libdir'" |
| 2188 | finalize=no |
| 2189 | fi |
| 2190 | done |
| 2191 | |
| 2192 | relink_command= |
| 2193 | func_source "$wrapper" |
| 2194 | |
| 2195 | outputname= |
| 2196 | if test "$fast_install" = no && test -n "$relink_command"; then |
| 2197 | $opt_dry_run || { |
| 2198 | if test "$finalize" = yes; then |
| 2199 | tmpdir=`func_mktempdir` |
| 2200 | func_basename "$file$stripped_ext" |
| 2201 | file="$func_basename_result" |
| 2202 | outputname="$tmpdir/$file" |
| 2203 | # Replace the output file specification. |
| 2204 | relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` |
| 2205 | |
| 2206 | $opt_silent || { |
| 2207 | func_quote_for_expand "$relink_command" |
| 2208 | eval "func_echo $func_quote_for_expand_result" |
| 2209 | } |
| 2210 | if eval "$relink_command"; then : |
| 2211 | else |
| 2212 | func_error "error: relink \`$file' with the above command before installing it" |
| 2213 | $opt_dry_run || ${RM}r "$tmpdir" |
| 2214 | continue |
| 2215 | fi |
| 2216 | file="$outputname" |
| 2217 | else |
| 2218 | func_warning "cannot relink \`$file'" |
| 2219 | fi |
| 2220 | } |
| 2221 | else |
| 2222 | # Install the binary that we compiled earlier. |
| 2223 | file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` |
| 2224 | fi |
| 2225 | fi |
| 2226 | |
| 2227 | # remove .exe since cygwin /usr/bin/install will append another |
| 2228 | # one anyway |
| 2229 | case $install_prog,$host in |
| 2230 | */usr/bin/install*,*cygwin*) |
| 2231 | case $file:$destfile in |
| 2232 | *.exe:*.exe) |
| 2233 | # this is ok |
| 2234 | ;; |
| 2235 | *.exe:*) |
| 2236 | destfile=$destfile.exe |
| 2237 | ;; |
| 2238 | *:*.exe) |
| 2239 | func_stripname '' '.exe' "$destfile" |
| 2240 | destfile=$func_stripname_result |
| 2241 | ;; |
| 2242 | esac |
| 2243 | ;; |
| 2244 | esac |
| 2245 | func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' |
| 2246 | $opt_dry_run || if test -n "$outputname"; then |
| 2247 | ${RM}r "$tmpdir" |
| 2248 | fi |
| 2249 | ;; |
| 2250 | esac |
| 2251 | done |
| 2252 | |
| 2253 | for file in $staticlibs; do |
| 2254 | func_basename "$file" |
| 2255 | name="$func_basename_result" |
| 2256 | |
| 2257 | # Set up the ranlib parameters. |
| 2258 | oldlib="$destdir/$name" |
| 2259 | |
| 2260 | func_show_eval "$install_prog \$file \$oldlib" 'exit $?' |
| 2261 | |
| 2262 | if test -n "$stripme" && test -n "$old_striplib"; then |
| 2263 | func_show_eval "$old_striplib $oldlib" 'exit $?' |
| 2264 | fi |
| 2265 | |
| 2266 | # Do each command in the postinstall commands. |
| 2267 | func_execute_cmds "$old_postinstall_cmds" 'exit $?' |
| 2268 | done |
| 2269 | |
| 2270 | test -n "$future_libdirs" && \ |
| 2271 | func_warning "remember to run \`$progname --finish$future_libdirs'" |
| 2272 | |
| 2273 | if test -n "$current_libdirs"; then |
| 2274 | # Maybe just do a dry run. |
| 2275 | $opt_dry_run && current_libdirs=" -n$current_libdirs" |
| 2276 | exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' |
| 2277 | else |
| 2278 | exit $EXIT_SUCCESS |
| 2279 | fi |
| 2280 | } |
| 2281 | |
| 2282 | test "$mode" = install && func_mode_install ${1+"$@"} |
| 2283 | |
| 2284 | |
| 2285 | # func_generate_dlsyms outputname originator pic_p |
| 2286 | # Extract symbols from dlprefiles and create ${outputname}S.o with |
| 2287 | # a dlpreopen symbol table. |
| 2288 | func_generate_dlsyms () |
| 2289 | { |
| 2290 | $opt_debug |
| 2291 | my_outputname="$1" |
| 2292 | my_originator="$2" |
| 2293 | my_pic_p="${3-no}" |
| 2294 | my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` |
| 2295 | my_dlsyms= |
| 2296 | |
| 2297 | if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then |
| 2298 | if test -n "$NM" && test -n "$global_symbol_pipe"; then |
| 2299 | my_dlsyms="${my_outputname}S.c" |
| 2300 | else |
| 2301 | func_error "not configured to extract global symbols from dlpreopened files" |
| 2302 | fi |
| 2303 | fi |
| 2304 | |
| 2305 | if test -n "$my_dlsyms"; then |
| 2306 | case $my_dlsyms in |
| 2307 | "") ;; |
| 2308 | *.c) |
| 2309 | # Discover the nlist of each of the dlfiles. |
| 2310 | nlist="$output_objdir/${my_outputname}.nm" |
| 2311 | |
| 2312 | func_show_eval "$RM $nlist ${nlist}S ${nlist}T" |
| 2313 | |
| 2314 | # Parse the name list into a source file. |
| 2315 | func_verbose "creating $output_objdir/$my_dlsyms" |
| 2316 | |
| 2317 | $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ |
| 2318 | /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ |
| 2319 | /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ |
| 2320 | |
| 2321 | #ifdef __cplusplus |
| 2322 | extern \"C\" { |
| 2323 | #endif |
| 2324 | |
| 2325 | /* External symbol declarations for the compiler. */\ |
| 2326 | " |
| 2327 | |
| 2328 | if test "$dlself" = yes; then |
| 2329 | func_verbose "generating symbol list for \`$output'" |
| 2330 | |
| 2331 | $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" |
| 2332 | |
| 2333 | # Add our own program objects to the symbol list. |
| 2334 | progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` |
| 2335 | for progfile in $progfiles; do |
| 2336 | func_verbose "extracting global C symbols from \`$progfile'" |
| 2337 | $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" |
| 2338 | done |
| 2339 | |
| 2340 | if test -n "$exclude_expsyms"; then |
| 2341 | $opt_dry_run || { |
| 2342 | eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' |
| 2343 | eval '$MV "$nlist"T "$nlist"' |
| 2344 | } |
| 2345 | fi |
| 2346 | |
| 2347 | if test -n "$export_symbols_regex"; then |
| 2348 | $opt_dry_run || { |
| 2349 | eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' |
| 2350 | eval '$MV "$nlist"T "$nlist"' |
| 2351 | } |
| 2352 | fi |
| 2353 | |
| 2354 | # Prepare the list of exported symbols |
| 2355 | if test -z "$export_symbols"; then |
| 2356 | export_symbols="$output_objdir/$outputname.exp" |
| 2357 | $opt_dry_run || { |
| 2358 | $RM $export_symbols |
| 2359 | eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' |
| 2360 | case $host in |
| 2361 | *cygwin* | *mingw* ) |
| 2362 | eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' |
| 2363 | eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' |
| 2364 | ;; |
| 2365 | esac |
| 2366 | } |
| 2367 | else |
| 2368 | $opt_dry_run || { |
| 2369 | eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' |
| 2370 | eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' |
| 2371 | eval '$MV "$nlist"T "$nlist"' |
| 2372 | case $host in |
| 2373 | *cygwin | *mingw* ) |
| 2374 | eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' |
| 2375 | eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' |
| 2376 | ;; |
| 2377 | esac |
| 2378 | } |
| 2379 | fi |
| 2380 | fi |
| 2381 | |
| 2382 | for dlprefile in $dlprefiles; do |
| 2383 | func_verbose "extracting global C symbols from \`$dlprefile'" |
| 2384 | func_basename "$dlprefile" |
| 2385 | name="$func_basename_result" |
| 2386 | $opt_dry_run || { |
| 2387 | eval '$ECHO ": $name " >> "$nlist"' |
| 2388 | eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" |
| 2389 | } |
| 2390 | done |
| 2391 | |
| 2392 | $opt_dry_run || { |
| 2393 | # Make sure we have at least an empty file. |
| 2394 | test -f "$nlist" || : > "$nlist" |
| 2395 | |
| 2396 | if test -n "$exclude_expsyms"; then |
| 2397 | $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T |
| 2398 | $MV "$nlist"T "$nlist" |
| 2399 | fi |
| 2400 | |
| 2401 | # Try sorting and uniquifying the output. |
| 2402 | if $GREP -v "^: " < "$nlist" | |
| 2403 | if sort -k 3 </dev/null >/dev/null 2>&1; then |
| 2404 | sort -k 3 |
| 2405 | else |
| 2406 | sort +2 |
| 2407 | fi | |
| 2408 | uniq > "$nlist"S; then |
| 2409 | : |
| 2410 | else |
| 2411 | $GREP -v "^: " < "$nlist" > "$nlist"S |
| 2412 | fi |
| 2413 | |
| 2414 | if test -f "$nlist"S; then |
| 2415 | eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' |
| 2416 | else |
| 2417 | $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" |
| 2418 | fi |
| 2419 | |
| 2420 | $ECHO >> "$output_objdir/$my_dlsyms" "\ |
| 2421 | |
| 2422 | /* The mapping between symbol names and symbols. */ |
| 2423 | typedef struct { |
| 2424 | const char *name; |
| 2425 | void *address; |
| 2426 | } lt_dlsymlist; |
| 2427 | " |
| 2428 | case $host in |
| 2429 | *cygwin* | *mingw* ) |
| 2430 | $ECHO >> "$output_objdir/$my_dlsyms" "\ |
| 2431 | /* DATA imports from DLLs on WIN32 con't be const, because |
| 2432 | runtime relocations are performed -- see ld's documentation |
| 2433 | on pseudo-relocs. */" |
| 2434 | lt_dlsym_const= ;; |
| 2435 | *osf5*) |
| 2436 | echo >> "$output_objdir/$my_dlsyms" "\ |
| 2437 | /* This system does not cope well with relocations in const data */" |
| 2438 | lt_dlsym_const= ;; |
| 2439 | *) |
| 2440 | lt_dlsym_const=const ;; |
| 2441 | esac |
| 2442 | |
| 2443 | $ECHO >> "$output_objdir/$my_dlsyms" "\ |
| 2444 | extern $lt_dlsym_const lt_dlsymlist |
| 2445 | lt_${my_prefix}_LTX_preloaded_symbols[]; |
| 2446 | $lt_dlsym_const lt_dlsymlist |
| 2447 | lt_${my_prefix}_LTX_preloaded_symbols[] = |
| 2448 | {\ |
| 2449 | { \"$my_originator\", (void *) 0 }," |
| 2450 | |
| 2451 | case $need_lib_prefix in |
| 2452 | no) |
| 2453 | eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" |
| 2454 | ;; |
| 2455 | *) |
| 2456 | eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" |
| 2457 | ;; |
| 2458 | esac |
| 2459 | $ECHO >> "$output_objdir/$my_dlsyms" "\ |
| 2460 | {0, (void *) 0} |
| 2461 | }; |
| 2462 | |
| 2463 | /* This works around a problem in FreeBSD linker */ |
| 2464 | #ifdef FREEBSD_WORKAROUND |
| 2465 | static const void *lt_preloaded_setup() { |
| 2466 | return lt_${my_prefix}_LTX_preloaded_symbols; |
| 2467 | } |
| 2468 | #endif |
| 2469 | |
| 2470 | #ifdef __cplusplus |
| 2471 | } |
| 2472 | #endif\ |
| 2473 | " |
| 2474 | } # !$opt_dry_run |
| 2475 | |
| 2476 | pic_flag_for_symtable= |
| 2477 | case "$compile_command " in |
| 2478 | *" -static "*) ;; |
| 2479 | *) |
| 2480 | case $host in |
| 2481 | # compiling the symbol table file with pic_flag works around |
| 2482 | # a FreeBSD bug that causes programs to crash when -lm is |
| 2483 | # linked before any other PIC object. But we must not use |
| 2484 | # pic_flag when linking with -static. The problem exists in |
| 2485 | # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. |
| 2486 | *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) |
| 2487 | pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; |
| 2488 | *-*-hpux*) |
| 2489 | pic_flag_for_symtable=" $pic_flag" ;; |
| 2490 | *) |
| 2491 | if test "X$my_pic_p" != Xno; then |
| 2492 | pic_flag_for_symtable=" $pic_flag" |
| 2493 | fi |
| 2494 | ;; |
| 2495 | esac |
| 2496 | ;; |
| 2497 | esac |
| 2498 | symtab_cflags= |
| 2499 | for arg in $LTCFLAGS; do |
| 2500 | case $arg in |
| 2501 | -pie | -fpie | -fPIE) ;; |
| 2502 | *) symtab_cflags="$symtab_cflags $arg" ;; |
| 2503 | esac |
| 2504 | done |
| 2505 | |
| 2506 | # Now compile the dynamic symbol file. |
| 2507 | func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' |
| 2508 | |
| 2509 | # Clean up the generated files. |
| 2510 | func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' |
| 2511 | |
| 2512 | # Transform the symbol file into the correct name. |
| 2513 | symfileobj="$output_objdir/${my_outputname}S.$objext" |
| 2514 | case $host in |
| 2515 | *cygwin* | *mingw* ) |
| 2516 | if test -f "$output_objdir/$my_outputname.def"; then |
| 2517 | compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` |
| 2518 | finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` |
| 2519 | else |
| 2520 | compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` |
| 2521 | finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` |
| 2522 | fi |
| 2523 | ;; |
| 2524 | *) |
| 2525 | compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` |
| 2526 | finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` |
| 2527 | ;; |
| 2528 | esac |
| 2529 | ;; |
| 2530 | *) |
| 2531 | func_fatal_error "unknown suffix for \`$my_dlsyms'" |
| 2532 | ;; |
| 2533 | esac |
| 2534 | else |
| 2535 | # We keep going just in case the user didn't refer to |
| 2536 | # lt_preloaded_symbols. The linker will fail if global_symbol_pipe |
| 2537 | # really was required. |
| 2538 | |
| 2539 | # Nullify the symbol file. |
| 2540 | compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` |
| 2541 | finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` |
| 2542 | fi |
| 2543 | } |
| 2544 | |
| 2545 | # func_win32_libid arg |
| 2546 | # return the library type of file 'arg' |
| 2547 | # |
| 2548 | # Need a lot of goo to handle *both* DLLs and import libs |
| 2549 | # Has to be a shell function in order to 'eat' the argument |
| 2550 | # that is supplied when $file_magic_command is called. |
| 2551 | func_win32_libid () |
| 2552 | { |
| 2553 | $opt_debug |
| 2554 | win32_libid_type="unknown" |
| 2555 | win32_fileres=`file -L $1 2>/dev/null` |
| 2556 | case $win32_fileres in |
| 2557 | *ar\ archive\ import\ library*) # definitely import |
| 2558 | win32_libid_type="x86 archive import" |
| 2559 | ;; |
| 2560 | *ar\ archive*) # could be an import, or static |
| 2561 | if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | |
| 2562 | $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then |
| 2563 | win32_nmres=`eval $NM -f posix -A $1 | |
| 2564 | $SED -n -e ' |
| 2565 | 1,100{ |
| 2566 | / I /{ |
| 2567 | s,.*,import, |
| 2568 | p |
| 2569 | q |
| 2570 | } |
| 2571 | }'` |
| 2572 | case $win32_nmres in |
| 2573 | import*) win32_libid_type="x86 archive import";; |
| 2574 | *) win32_libid_type="x86 archive static";; |
| 2575 | esac |
| 2576 | fi |
| 2577 | ;; |
| 2578 | *DLL*) |
| 2579 | win32_libid_type="x86 DLL" |
| 2580 | ;; |
| 2581 | *executable*) # but shell scripts are "executable" too... |
| 2582 | case $win32_fileres in |
| 2583 | *MS\ Windows\ PE\ Intel*) |
| 2584 | win32_libid_type="x86 DLL" |
| 2585 | ;; |
| 2586 | esac |
| 2587 | ;; |
| 2588 | esac |
| 2589 | $ECHO "$win32_libid_type" |
| 2590 | } |
| 2591 | |
| 2592 | |
| 2593 | |
| 2594 | # func_extract_an_archive dir oldlib |
| 2595 | func_extract_an_archive () |
| 2596 | { |
| 2597 | $opt_debug |
| 2598 | f_ex_an_ar_dir="$1"; shift |
| 2599 | f_ex_an_ar_oldlib="$1" |
| 2600 | func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' |
| 2601 | if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then |
| 2602 | : |
| 2603 | else |
| 2604 | func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" |
| 2605 | fi |
| 2606 | } |
| 2607 | |
| 2608 | |
| 2609 | # func_extract_archives gentop oldlib ... |
| 2610 | func_extract_archives () |
| 2611 | { |
| 2612 | $opt_debug |
| 2613 | my_gentop="$1"; shift |
| 2614 | my_oldlibs=${1+"$@"} |
| 2615 | my_oldobjs="" |
| 2616 | my_xlib="" |
| 2617 | my_xabs="" |
| 2618 | my_xdir="" |
| 2619 | |
| 2620 | for my_xlib in $my_oldlibs; do |
| 2621 | # Extract the objects. |
| 2622 | case $my_xlib in |
| 2623 | [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; |
| 2624 | *) my_xabs=`pwd`"/$my_xlib" ;; |
| 2625 | esac |
| 2626 | func_basename "$my_xlib" |
| 2627 | my_xlib="$func_basename_result" |
| 2628 | my_xlib_u=$my_xlib |
| 2629 | while :; do |
| 2630 | case " $extracted_archives " in |
| 2631 | *" $my_xlib_u "*) |
| 2632 | func_arith $extracted_serial + 1 |
| 2633 | extracted_serial=$func_arith_result |
| 2634 | my_xlib_u=lt$extracted_serial-$my_xlib ;; |
| 2635 | *) break ;; |
| 2636 | esac |
| 2637 | done |
| 2638 | extracted_archives="$extracted_archives $my_xlib_u" |
| 2639 | my_xdir="$my_gentop/$my_xlib_u" |
| 2640 | |
| 2641 | func_mkdir_p "$my_xdir" |
| 2642 | |
| 2643 | case $host in |
| 2644 | *-darwin*) |
| 2645 | func_verbose "Extracting $my_xabs" |
| 2646 | # Do not bother doing anything if just a dry run |
| 2647 | $opt_dry_run || { |
| 2648 | darwin_orig_dir=`pwd` |
| 2649 | cd $my_xdir || exit $? |
| 2650 | darwin_archive=$my_xabs |
| 2651 | darwin_curdir=`pwd` |
| 2652 | darwin_base_archive=`basename "$darwin_archive"` |
| 2653 | darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` |
| 2654 | if test -n "$darwin_arches"; then |
| 2655 | darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` |
| 2656 | darwin_arch= |
| 2657 | func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" |
| 2658 | for darwin_arch in $darwin_arches ; do |
| 2659 | func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" |
| 2660 | $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" |
| 2661 | cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" |
| 2662 | func_extract_an_archive "`pwd`" "${darwin_base_archive}" |
| 2663 | cd "$darwin_curdir" |
| 2664 | $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" |
| 2665 | done # $darwin_arches |
| 2666 | ## Okay now we've a bunch of thin objects, gotta fatten them up :) |
| 2667 | darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` |
| 2668 | darwin_file= |
| 2669 | darwin_files= |
| 2670 | for darwin_file in $darwin_filelist; do |
| 2671 | darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` |
| 2672 | $LIPO -create -output "$darwin_file" $darwin_files |
| 2673 | done # $darwin_filelist |
| 2674 | $RM -rf unfat-$$ |
| 2675 | cd "$darwin_orig_dir" |
| 2676 | else |
| 2677 | cd $darwin_orig_dir |
| 2678 | func_extract_an_archive "$my_xdir" "$my_xabs" |
| 2679 | fi # $darwin_arches |
| 2680 | } # !$opt_dry_run |
| 2681 | ;; |
| 2682 | *) |
| 2683 | func_extract_an_archive "$my_xdir" "$my_xabs" |
| 2684 | ;; |
| 2685 | esac |
| 2686 | my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` |
| 2687 | done |
| 2688 | |
| 2689 | func_extract_archives_result="$my_oldobjs" |
| 2690 | } |
| 2691 | |
| 2692 | |
| 2693 | |
| 2694 | # func_emit_wrapper arg |
| 2695 | # |
| 2696 | # emit a libtool wrapper script on stdout |
| 2697 | # don't directly open a file because we may want to |
| 2698 | # incorporate the script contents within a cygwin/mingw |
| 2699 | # wrapper executable. Must ONLY be called from within |
| 2700 | # func_mode_link because it depends on a number of variable |
| 2701 | # set therein. |
| 2702 | # |
| 2703 | # arg is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR |
| 2704 | # variable will take. If 'yes', then the emitted script |
| 2705 | # will assume that the directory in which it is stored is |
| 2706 | # the '.lib' directory. This is a cygwin/mingw-specific |
| 2707 | # behavior. |
| 2708 | func_emit_wrapper () |
| 2709 | { |
| 2710 | func_emit_wrapper_arg1=no |
| 2711 | if test -n "$1" ; then |
| 2712 | func_emit_wrapper_arg1=$1 |
| 2713 | fi |
| 2714 | |
| 2715 | $ECHO "\ |
| 2716 | #! $SHELL |
| 2717 | |
| 2718 | # $output - temporary wrapper script for $objdir/$outputname |
| 2719 | # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION |
| 2720 | # |
| 2721 | # The $output program cannot be directly executed until all the libtool |
| 2722 | # libraries that it depends on are installed. |
| 2723 | # |
| 2724 | # This wrapper script should never be moved out of the build directory. |
| 2725 | # If it is, it will not operate correctly. |
| 2726 | |
| 2727 | # Sed substitution that helps us do robust quoting. It backslashifies |
| 2728 | # metacharacters that are still active within double-quoted strings. |
| 2729 | Xsed='${SED} -e 1s/^X//' |
| 2730 | sed_quote_subst='$sed_quote_subst' |
| 2731 | |
| 2732 | # Be Bourne compatible |
| 2733 | if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then |
| 2734 | emulate sh |
| 2735 | NULLCMD=: |
| 2736 | # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which |
| 2737 | # is contrary to our usage. Disable this feature. |
| 2738 | alias -g '\${1+\"\$@\"}'='\"\$@\"' |
| 2739 | setopt NO_GLOB_SUBST |
| 2740 | else |
| 2741 | case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac |
| 2742 | fi |
| 2743 | BIN_SH=xpg4; export BIN_SH # for Tru64 |
| 2744 | DUALCASE=1; export DUALCASE # for MKS sh |
| 2745 | |
| 2746 | # The HP-UX ksh and POSIX shell print the target directory to stdout |
| 2747 | # if CDPATH is set. |
| 2748 | (unset CDPATH) >/dev/null 2>&1 && unset CDPATH |
| 2749 | |
| 2750 | relink_command=\"$relink_command\" |
| 2751 | |
| 2752 | # This environment variable determines our operation mode. |
| 2753 | if test \"\$libtool_install_magic\" = \"$magic\"; then |
| 2754 | # install mode needs the following variables: |
| 2755 | generated_by_libtool_version='$macro_version' |
| 2756 | notinst_deplibs='$notinst_deplibs' |
| 2757 | else |
| 2758 | # When we are sourced in execute mode, \$file and \$ECHO are already set. |
| 2759 | if test \"\$libtool_execute_magic\" != \"$magic\"; then |
| 2760 | ECHO=\"$qecho\" |
| 2761 | file=\"\$0\" |
| 2762 | # Make sure echo works. |
| 2763 | if test \"X\$1\" = X--no-reexec; then |
| 2764 | # Discard the --no-reexec flag, and continue. |
| 2765 | shift |
| 2766 | elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then |
| 2767 | # Yippee, \$ECHO works! |
| 2768 | : |
| 2769 | else |
| 2770 | # Restart under the correct shell, and then maybe \$ECHO will work. |
| 2771 | exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} |
| 2772 | fi |
| 2773 | fi\ |
| 2774 | " |
| 2775 | $ECHO "\ |
| 2776 | |
| 2777 | # Find the directory that this script lives in. |
| 2778 | thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` |
| 2779 | test \"x\$thisdir\" = \"x\$file\" && thisdir=. |
| 2780 | |
| 2781 | # Follow symbolic links until we get to the real thisdir. |
| 2782 | file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` |
| 2783 | while test -n \"\$file\"; do |
| 2784 | destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` |
| 2785 | |
| 2786 | # If there was a directory component, then change thisdir. |
| 2787 | if test \"x\$destdir\" != \"x\$file\"; then |
| 2788 | case \"\$destdir\" in |
| 2789 | [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; |
| 2790 | *) thisdir=\"\$thisdir/\$destdir\" ;; |
| 2791 | esac |
| 2792 | fi |
| 2793 | |
| 2794 | file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` |
| 2795 | file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` |
| 2796 | done |
| 2797 | |
| 2798 | # Usually 'no', except on cygwin/mingw when embedded into |
| 2799 | # the cwrapper. |
| 2800 | WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 |
| 2801 | if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then |
| 2802 | # special case for '.' |
| 2803 | if test \"\$thisdir\" = \".\"; then |
| 2804 | thisdir=\`pwd\` |
| 2805 | fi |
| 2806 | # remove .libs from thisdir |
| 2807 | case \"\$thisdir\" in |
| 2808 | *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; |
| 2809 | $objdir ) thisdir=. ;; |
| 2810 | esac |
| 2811 | fi |
| 2812 | |
| 2813 | # Try to get the absolute directory name. |
| 2814 | absdir=\`cd \"\$thisdir\" && pwd\` |
| 2815 | test -n \"\$absdir\" && thisdir=\"\$absdir\" |
| 2816 | " |
| 2817 | |
| 2818 | if test "$fast_install" = yes; then |
| 2819 | $ECHO "\ |
| 2820 | program=lt-'$outputname'$exeext |
| 2821 | progdir=\"\$thisdir/$objdir\" |
| 2822 | |
| 2823 | if test ! -f \"\$progdir/\$program\" || |
| 2824 | { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ |
| 2825 | test \"X\$file\" != \"X\$progdir/\$program\"; }; then |
| 2826 | |
| 2827 | file=\"\$\$-\$program\" |
| 2828 | |
| 2829 | if test ! -d \"\$progdir\"; then |
| 2830 | $MKDIR \"\$progdir\" |
| 2831 | else |
| 2832 | $RM \"\$progdir/\$file\" |
| 2833 | fi" |
| 2834 | |
| 2835 | $ECHO "\ |
| 2836 | |
| 2837 | # relink executable if necessary |
| 2838 | if test -n \"\$relink_command\"; then |
| 2839 | if relink_command_output=\`eval \$relink_command 2>&1\`; then : |
| 2840 | else |
| 2841 | $ECHO \"\$relink_command_output\" >&2 |
| 2842 | $RM \"\$progdir/\$file\" |
| 2843 | exit 1 |
| 2844 | fi |
| 2845 | fi |
| 2846 | |
| 2847 | $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || |
| 2848 | { $RM \"\$progdir/\$program\"; |
| 2849 | $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } |
| 2850 | $RM \"\$progdir/\$file\" |
| 2851 | fi" |
| 2852 | else |
| 2853 | $ECHO "\ |
| 2854 | program='$outputname' |
| 2855 | progdir=\"\$thisdir/$objdir\" |
| 2856 | " |
| 2857 | fi |
| 2858 | |
| 2859 | $ECHO "\ |
| 2860 | |
| 2861 | if test -f \"\$progdir/\$program\"; then" |
| 2862 | |
| 2863 | # Export our shlibpath_var if we have one. |
| 2864 | if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then |
| 2865 | $ECHO "\ |
| 2866 | # Add our own library path to $shlibpath_var |
| 2867 | $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" |
| 2868 | |
| 2869 | # Some systems cannot cope with colon-terminated $shlibpath_var |
| 2870 | # The second colon is a workaround for a bug in BeOS R4 sed |
| 2871 | $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` |
| 2872 | |
| 2873 | export $shlibpath_var |
| 2874 | " |
| 2875 | fi |
| 2876 | |
| 2877 | # fixup the dll searchpath if we need to. |
| 2878 | if test -n "$dllsearchpath"; then |
| 2879 | $ECHO "\ |
| 2880 | # Add the dll search path components to the executable PATH |
| 2881 | PATH=$dllsearchpath:\$PATH |
| 2882 | " |
| 2883 | fi |
| 2884 | |
| 2885 | $ECHO "\ |
| 2886 | if test \"\$libtool_execute_magic\" != \"$magic\"; then |
| 2887 | # Run the actual program with our arguments. |
| 2888 | " |
| 2889 | case $host in |
| 2890 | # Backslashes separate directories on plain windows |
| 2891 | *-*-mingw | *-*-os2*) |
| 2892 | $ECHO "\ |
| 2893 | exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} |
| 2894 | " |
| 2895 | ;; |
| 2896 | |
| 2897 | *) |
| 2898 | $ECHO "\ |
| 2899 | exec \"\$progdir/\$program\" \${1+\"\$@\"} |
| 2900 | " |
| 2901 | ;; |
| 2902 | esac |
| 2903 | $ECHO "\ |
| 2904 | \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 |
| 2905 | exit 1 |
| 2906 | fi |
| 2907 | else |
| 2908 | # The program doesn't exist. |
| 2909 | \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 |
| 2910 | \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 |
| 2911 | $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 |
| 2912 | exit 1 |
| 2913 | fi |
| 2914 | fi\ |
| 2915 | " |
| 2916 | } |
| 2917 | # end: func_emit_wrapper |
| 2918 | |
| 2919 | # func_emit_cwrapperexe_src |
| 2920 | # emit the source code for a wrapper executable on stdout |
| 2921 | # Must ONLY be called from within func_mode_link because |
| 2922 | # it depends on a number of variable set therein. |
| 2923 | func_emit_cwrapperexe_src () |
| 2924 | { |
| 2925 | cat <<EOF |
| 2926 | |
| 2927 | /* $cwrappersource - temporary wrapper executable for $objdir/$outputname |
| 2928 | Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION |
| 2929 | |
| 2930 | The $output program cannot be directly executed until all the libtool |
| 2931 | libraries that it depends on are installed. |
| 2932 | |
| 2933 | This wrapper executable should never be moved out of the build directory. |
| 2934 | If it is, it will not operate correctly. |
| 2935 | |
| 2936 | Currently, it simply execs the wrapper *script* "$SHELL $output", |
| 2937 | but could eventually absorb all of the scripts functionality and |
| 2938 | exec $objdir/$outputname directly. |
| 2939 | */ |
| 2940 | EOF |
| 2941 | cat <<"EOF" |
| 2942 | #include <stdio.h> |
| 2943 | #include <stdlib.h> |
| 2944 | #ifdef _MSC_VER |
| 2945 | # include <direct.h> |
| 2946 | # include <process.h> |
| 2947 | # include <io.h> |
| 2948 | # define setmode _setmode |
| 2949 | #else |
| 2950 | # include <unistd.h> |
| 2951 | # include <stdint.h> |
| 2952 | # ifdef __CYGWIN__ |
| 2953 | # include <io.h> |
| 2954 | # endif |
| 2955 | #endif |
| 2956 | #include <malloc.h> |
| 2957 | #include <stdarg.h> |
| 2958 | #include <assert.h> |
| 2959 | #include <string.h> |
| 2960 | #include <ctype.h> |
| 2961 | #include <errno.h> |
| 2962 | #include <fcntl.h> |
| 2963 | #include <sys/stat.h> |
| 2964 | |
| 2965 | #if defined(PATH_MAX) |
| 2966 | # define LT_PATHMAX PATH_MAX |
| 2967 | #elif defined(MAXPATHLEN) |
| 2968 | # define LT_PATHMAX MAXPATHLEN |
| 2969 | #else |
| 2970 | # define LT_PATHMAX 1024 |
| 2971 | #endif |
| 2972 | |
| 2973 | #ifndef S_IXOTH |
| 2974 | # define S_IXOTH 0 |
| 2975 | #endif |
| 2976 | #ifndef S_IXGRP |
| 2977 | # define S_IXGRP 0 |
| 2978 | #endif |
| 2979 | |
| 2980 | #ifdef _MSC_VER |
| 2981 | # define S_IXUSR _S_IEXEC |
| 2982 | # define stat _stat |
| 2983 | # ifndef _INTPTR_T_DEFINED |
| 2984 | # define intptr_t int |
| 2985 | # endif |
| 2986 | #endif |
| 2987 | |
| 2988 | #ifndef DIR_SEPARATOR |
| 2989 | # define DIR_SEPARATOR '/' |
| 2990 | # define PATH_SEPARATOR ':' |
| 2991 | #endif |
| 2992 | |
| 2993 | #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ |
| 2994 | defined (__OS2__) |
| 2995 | # define HAVE_DOS_BASED_FILE_SYSTEM |
| 2996 | # define FOPEN_WB "wb" |
| 2997 | # ifndef DIR_SEPARATOR_2 |
| 2998 | # define DIR_SEPARATOR_2 '\\' |
| 2999 | # endif |
| 3000 | # ifndef PATH_SEPARATOR_2 |
| 3001 | # define PATH_SEPARATOR_2 ';' |
| 3002 | # endif |
| 3003 | #endif |
| 3004 | |
| 3005 | #ifndef DIR_SEPARATOR_2 |
| 3006 | # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) |
| 3007 | #else /* DIR_SEPARATOR_2 */ |
| 3008 | # define IS_DIR_SEPARATOR(ch) \ |
| 3009 | (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) |
| 3010 | #endif /* DIR_SEPARATOR_2 */ |
| 3011 | |
| 3012 | #ifndef PATH_SEPARATOR_2 |
| 3013 | # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) |
| 3014 | #else /* PATH_SEPARATOR_2 */ |
| 3015 | # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) |
| 3016 | #endif /* PATH_SEPARATOR_2 */ |
| 3017 | |
| 3018 | #ifdef __CYGWIN__ |
| 3019 | # define FOPEN_WB "wb" |
| 3020 | #endif |
| 3021 | |
| 3022 | #ifndef FOPEN_WB |
| 3023 | # define FOPEN_WB "w" |
| 3024 | #endif |
| 3025 | #ifndef _O_BINARY |
| 3026 | # define _O_BINARY 0 |
| 3027 | #endif |
| 3028 | |
| 3029 | #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) |
| 3030 | #define XFREE(stale) do { \ |
| 3031 | if (stale) { free ((void *) stale); stale = 0; } \ |
| 3032 | } while (0) |
| 3033 | |
| 3034 | #undef LTWRAPPER_DEBUGPRINTF |
| 3035 | #if defined DEBUGWRAPPER |
| 3036 | # define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args |
| 3037 | static void |
| 3038 | ltwrapper_debugprintf (const char *fmt, ...) |
| 3039 | { |
| 3040 | va_list args; |
| 3041 | va_start (args, fmt); |
| 3042 | (void) vfprintf (stderr, fmt, args); |
| 3043 | va_end (args); |
| 3044 | } |
| 3045 | #else |
| 3046 | # define LTWRAPPER_DEBUGPRINTF(args) |
| 3047 | #endif |
| 3048 | |
| 3049 | const char *program_name = NULL; |
| 3050 | |
| 3051 | void *xmalloc (size_t num); |
| 3052 | char *xstrdup (const char *string); |
| 3053 | const char *base_name (const char *name); |
| 3054 | char *find_executable (const char *wrapper); |
| 3055 | char *chase_symlinks (const char *pathspec); |
| 3056 | int make_executable (const char *path); |
| 3057 | int check_executable (const char *path); |
| 3058 | char *strendzap (char *str, const char *pat); |
| 3059 | void lt_fatal (const char *message, ...); |
| 3060 | |
| 3061 | static const char *script_text = |
| 3062 | EOF |
| 3063 | |
| 3064 | func_emit_wrapper yes | |
| 3065 | $SED -e 's/\([\\"]\)/\\\1/g' \ |
| 3066 | -e 's/^/ "/' -e 's/$/\\n"/' |
| 3067 | echo ";" |
| 3068 | |
| 3069 | cat <<EOF |
| 3070 | const char * MAGIC_EXE = "$magic_exe"; |
| 3071 | |
| 3072 | int |
| 3073 | main (int argc, char *argv[]) |
| 3074 | { |
| 3075 | char **newargz; |
| 3076 | char *tmp_pathspec; |
| 3077 | char *actual_cwrapper_path; |
| 3078 | char *shwrapper_name; |
| 3079 | intptr_t rval = 127; |
| 3080 | FILE *shwrapper; |
| 3081 | |
| 3082 | const char *dumpscript_opt = "--lt-dump-script"; |
| 3083 | int i; |
| 3084 | |
| 3085 | program_name = (char *) xstrdup (base_name (argv[0])); |
| 3086 | LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); |
| 3087 | LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); |
| 3088 | |
| 3089 | /* very simple arg parsing; don't want to rely on getopt */ |
| 3090 | for (i = 1; i < argc; i++) |
| 3091 | { |
| 3092 | if (strcmp (argv[i], dumpscript_opt) == 0) |
| 3093 | { |
| 3094 | EOF |
| 3095 | case "$host" in |
| 3096 | *mingw* | *cygwin* ) |
| 3097 | # make stdout use "unix" line endings |
| 3098 | echo " setmode(1,_O_BINARY);" |
| 3099 | ;; |
| 3100 | esac |
| 3101 | |
| 3102 | cat <<EOF |
| 3103 | printf ("%s", script_text); |
| 3104 | return 0; |
| 3105 | } |
| 3106 | } |
| 3107 | |
| 3108 | newargz = XMALLOC (char *, argc + 2); |
| 3109 | EOF |
| 3110 | |
| 3111 | if test -n "$TARGETSHELL" ; then |
| 3112 | # no path translation at all |
| 3113 | lt_newargv0=$TARGETSHELL |
| 3114 | else |
| 3115 | case "$host" in |
| 3116 | *mingw* ) |
| 3117 | # awkward: cmd appends spaces to result |
| 3118 | lt_sed_strip_trailing_spaces="s/[ ]*\$//" |
| 3119 | lt_newargv0=`( cmd //c echo $SHELL | $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo $SHELL` |
| 3120 | case $lt_newargv0 in |
| 3121 | *.exe | *.EXE) ;; |
| 3122 | *) lt_newargv0=$lt_newargv0.exe ;; |
| 3123 | esac |
| 3124 | ;; |
| 3125 | * ) lt_newargv0=$SHELL ;; |
| 3126 | esac |
| 3127 | fi |
| 3128 | |
| 3129 | cat <<EOF |
| 3130 | newargz[0] = (char *) xstrdup ("$lt_newargv0"); |
| 3131 | EOF |
| 3132 | |
| 3133 | cat <<"EOF" |
| 3134 | tmp_pathspec = find_executable (argv[0]); |
| 3135 | if (tmp_pathspec == NULL) |
| 3136 | lt_fatal ("Couldn't find %s", argv[0]); |
| 3137 | LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", |
| 3138 | tmp_pathspec)); |
| 3139 | |
| 3140 | actual_cwrapper_path = chase_symlinks (tmp_pathspec); |
| 3141 | LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", |
| 3142 | actual_cwrapper_path)); |
| 3143 | XFREE (tmp_pathspec); |
| 3144 | |
| 3145 | shwrapper_name = (char *) xstrdup (base_name (actual_cwrapper_path)); |
| 3146 | strendzap (actual_cwrapper_path, shwrapper_name); |
| 3147 | |
| 3148 | /* shwrapper_name transforms */ |
| 3149 | strendzap (shwrapper_name, ".exe"); |
| 3150 | tmp_pathspec = XMALLOC (char, (strlen (shwrapper_name) + |
| 3151 | strlen ("_ltshwrapperTMP") + 1)); |
| 3152 | strcpy (tmp_pathspec, shwrapper_name); |
| 3153 | strcat (tmp_pathspec, "_ltshwrapperTMP"); |
| 3154 | XFREE (shwrapper_name); |
| 3155 | shwrapper_name = tmp_pathspec; |
| 3156 | tmp_pathspec = 0; |
| 3157 | LTWRAPPER_DEBUGPRINTF (("(main) libtool shell wrapper name: %s\n", |
| 3158 | shwrapper_name)); |
| 3159 | EOF |
| 3160 | |
| 3161 | cat <<EOF |
| 3162 | newargz[1] = |
| 3163 | XMALLOC (char, (strlen (actual_cwrapper_path) + |
| 3164 | strlen ("$objdir") + 1 + strlen (shwrapper_name) + 1)); |
| 3165 | strcpy (newargz[1], actual_cwrapper_path); |
| 3166 | strcat (newargz[1], "$objdir"); |
| 3167 | strcat (newargz[1], "/"); |
| 3168 | strcat (newargz[1], shwrapper_name); |
| 3169 | EOF |
| 3170 | |
| 3171 | |
| 3172 | case $host_os in |
| 3173 | mingw*) |
| 3174 | cat <<"EOF" |
| 3175 | { |
| 3176 | char* p; |
| 3177 | while ((p = strchr (newargz[1], '\\')) != NULL) |
| 3178 | { |
| 3179 | *p = '/'; |
| 3180 | } |
| 3181 | } |
| 3182 | EOF |
| 3183 | ;; |
| 3184 | esac |
| 3185 | |
| 3186 | cat <<"EOF" |
| 3187 | XFREE (shwrapper_name); |
| 3188 | XFREE (actual_cwrapper_path); |
| 3189 | |
| 3190 | /* always write in binary mode */ |
| 3191 | if ((shwrapper = fopen (newargz[1], FOPEN_WB)) == 0) |
| 3192 | { |
| 3193 | lt_fatal ("Could not open %s for writing", newargz[1]); |
| 3194 | } |
| 3195 | fprintf (shwrapper, "%s", script_text); |
| 3196 | fclose (shwrapper); |
| 3197 | |
| 3198 | make_executable (newargz[1]); |
| 3199 | |
| 3200 | for (i = 1; i < argc; i++) |
| 3201 | newargz[i + 1] = xstrdup (argv[i]); |
| 3202 | newargz[argc + 1] = NULL; |
| 3203 | |
| 3204 | for (i = 0; i < argc + 1; i++) |
| 3205 | { |
| 3206 | LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, newargz[i])); |
| 3207 | } |
| 3208 | |
| 3209 | EOF |
| 3210 | |
| 3211 | case $host_os in |
| 3212 | mingw*) |
| 3213 | cat <<EOF |
| 3214 | /* execv doesn't actually work on mingw as expected on unix */ |
| 3215 | rval = _spawnv (_P_WAIT, "$lt_newargv0", (const char * const *) newargz); |
| 3216 | if (rval == -1) |
| 3217 | { |
| 3218 | /* failed to start process */ |
| 3219 | LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"$lt_newargv0\": errno = %d\n", errno)); |
| 3220 | return 127; |
| 3221 | } |
| 3222 | return rval; |
| 3223 | } |
| 3224 | EOF |
| 3225 | ;; |
| 3226 | *) |
| 3227 | cat <<EOF |
| 3228 | execv ("$lt_newargv0", newargz); |
| 3229 | return rval; /* =127, but avoids unused variable warning */ |
| 3230 | } |
| 3231 | EOF |
| 3232 | ;; |
| 3233 | esac |
| 3234 | |
| 3235 | cat <<"EOF" |
| 3236 | |
| 3237 | void * |
| 3238 | xmalloc (size_t num) |
| 3239 | { |
| 3240 | void *p = (void *) malloc (num); |
| 3241 | if (!p) |
| 3242 | lt_fatal ("Memory exhausted"); |
| 3243 | |
| 3244 | return p; |
| 3245 | } |
| 3246 | |
| 3247 | char * |
| 3248 | xstrdup (const char *string) |
| 3249 | { |
| 3250 | return string ? strcpy ((char *) xmalloc (strlen (string) + 1), |
| 3251 | string) : NULL; |
| 3252 | } |
| 3253 | |
| 3254 | const char * |
| 3255 | base_name (const char *name) |
| 3256 | { |
| 3257 | const char *base; |
| 3258 | |
| 3259 | #if defined (HAVE_DOS_BASED_FILE_SYSTEM) |
| 3260 | /* Skip over the disk name in MSDOS pathnames. */ |
| 3261 | if (isalpha ((unsigned char) name[0]) && name[1] == ':') |
| 3262 | name += 2; |
| 3263 | #endif |
| 3264 | |
| 3265 | for (base = name; *name; name++) |
| 3266 | if (IS_DIR_SEPARATOR (*name)) |
| 3267 | base = name + 1; |
| 3268 | return base; |
| 3269 | } |
| 3270 | |
| 3271 | int |
| 3272 | check_executable (const char *path) |
| 3273 | { |
| 3274 | struct stat st; |
| 3275 | |
| 3276 | LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", |
| 3277 | path ? (*path ? path : "EMPTY!") : "NULL!")); |
| 3278 | if ((!path) || (!*path)) |
| 3279 | return 0; |
| 3280 | |
| 3281 | if ((stat (path, &st) >= 0) |
| 3282 | && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) |
| 3283 | return 1; |
| 3284 | else |
| 3285 | return 0; |
| 3286 | } |
| 3287 | |
| 3288 | int |
| 3289 | make_executable (const char *path) |
| 3290 | { |
| 3291 | int rval = 0; |
| 3292 | struct stat st; |
| 3293 | |
| 3294 | LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", |
| 3295 | path ? (*path ? path : "EMPTY!") : "NULL!")); |
| 3296 | if ((!path) || (!*path)) |
| 3297 | return 0; |
| 3298 | |
| 3299 | if (stat (path, &st) >= 0) |
| 3300 | { |
| 3301 | rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); |
| 3302 | } |
| 3303 | return rval; |
| 3304 | } |
| 3305 | |
| 3306 | /* Searches for the full path of the wrapper. Returns |
| 3307 | newly allocated full path name if found, NULL otherwise |
| 3308 | Does not chase symlinks, even on platforms that support them. |
| 3309 | */ |
| 3310 | char * |
| 3311 | find_executable (const char *wrapper) |
| 3312 | { |
| 3313 | int has_slash = 0; |
| 3314 | const char *p; |
| 3315 | const char *p_next; |
| 3316 | /* static buffer for getcwd */ |
| 3317 | char tmp[LT_PATHMAX + 1]; |
| 3318 | int tmp_len; |
| 3319 | char *concat_name; |
| 3320 | |
| 3321 | LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", |
| 3322 | wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); |
| 3323 | |
| 3324 | if ((wrapper == NULL) || (*wrapper == '\0')) |
| 3325 | return NULL; |
| 3326 | |
| 3327 | /* Absolute path? */ |
| 3328 | #if defined (HAVE_DOS_BASED_FILE_SYSTEM) |
| 3329 | if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') |
| 3330 | { |
| 3331 | concat_name = xstrdup (wrapper); |
| 3332 | if (check_executable (concat_name)) |
| 3333 | return concat_name; |
| 3334 | XFREE (concat_name); |
| 3335 | } |
| 3336 | else |
| 3337 | { |
| 3338 | #endif |
| 3339 | if (IS_DIR_SEPARATOR (wrapper[0])) |
| 3340 | { |
| 3341 | concat_name = xstrdup (wrapper); |
| 3342 | if (check_executable (concat_name)) |
| 3343 | return concat_name; |
| 3344 | XFREE (concat_name); |
| 3345 | } |
| 3346 | #if defined (HAVE_DOS_BASED_FILE_SYSTEM) |
| 3347 | } |
| 3348 | #endif |
| 3349 | |
| 3350 | for (p = wrapper; *p; p++) |
| 3351 | if (*p == '/') |
| 3352 | { |
| 3353 | has_slash = 1; |
| 3354 | break; |
| 3355 | } |
| 3356 | if (!has_slash) |
| 3357 | { |
| 3358 | /* no slashes; search PATH */ |
| 3359 | const char *path = getenv ("PATH"); |
| 3360 | if (path != NULL) |
| 3361 | { |
| 3362 | for (p = path; *p; p = p_next) |
| 3363 | { |
| 3364 | const char *q; |
| 3365 | size_t p_len; |
| 3366 | for (q = p; *q; q++) |
| 3367 | if (IS_PATH_SEPARATOR (*q)) |
| 3368 | break; |
| 3369 | p_len = q - p; |
| 3370 | p_next = (*q == '\0' ? q : q + 1); |
| 3371 | if (p_len == 0) |
| 3372 | { |
| 3373 | /* empty path: current directory */ |
| 3374 | if (getcwd (tmp, LT_PATHMAX) == NULL) |
| 3375 | lt_fatal ("getcwd failed"); |
| 3376 | tmp_len = strlen (tmp); |
| 3377 | concat_name = |
| 3378 | XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); |
| 3379 | memcpy (concat_name, tmp, tmp_len); |
| 3380 | concat_name[tmp_len] = '/'; |
| 3381 | strcpy (concat_name + tmp_len + 1, wrapper); |
| 3382 | } |
| 3383 | else |
| 3384 | { |
| 3385 | concat_name = |
| 3386 | XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); |
| 3387 | memcpy (concat_name, p, p_len); |
| 3388 | concat_name[p_len] = '/'; |
| 3389 | strcpy (concat_name + p_len + 1, wrapper); |
| 3390 | } |
| 3391 | if (check_executable (concat_name)) |
| 3392 | return concat_name; |
| 3393 | XFREE (concat_name); |
| 3394 | } |
| 3395 | } |
| 3396 | /* not found in PATH; assume curdir */ |
| 3397 | } |
| 3398 | /* Relative path | not found in path: prepend cwd */ |
| 3399 | if (getcwd (tmp, LT_PATHMAX) == NULL) |
| 3400 | lt_fatal ("getcwd failed"); |
| 3401 | tmp_len = strlen (tmp); |
| 3402 | concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); |
| 3403 | memcpy (concat_name, tmp, tmp_len); |
| 3404 | concat_name[tmp_len] = '/'; |
| 3405 | strcpy (concat_name + tmp_len + 1, wrapper); |
| 3406 | |
| 3407 | if (check_executable (concat_name)) |
| 3408 | return concat_name; |
| 3409 | XFREE (concat_name); |
| 3410 | return NULL; |
| 3411 | } |
| 3412 | |
| 3413 | char * |
| 3414 | chase_symlinks (const char *pathspec) |
| 3415 | { |
| 3416 | #ifndef S_ISLNK |
| 3417 | return xstrdup (pathspec); |
| 3418 | #else |
| 3419 | char buf[LT_PATHMAX]; |
| 3420 | struct stat s; |
| 3421 | char *tmp_pathspec = xstrdup (pathspec); |
| 3422 | char *p; |
| 3423 | int has_symlinks = 0; |
| 3424 | while (strlen (tmp_pathspec) && !has_symlinks) |
| 3425 | { |
| 3426 | LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", |
| 3427 | tmp_pathspec)); |
| 3428 | if (lstat (tmp_pathspec, &s) == 0) |
| 3429 | { |
| 3430 | if (S_ISLNK (s.st_mode) != 0) |
| 3431 | { |
| 3432 | has_symlinks = 1; |
| 3433 | break; |
| 3434 | } |
| 3435 | |
| 3436 | /* search backwards for last DIR_SEPARATOR */ |
| 3437 | p = tmp_pathspec + strlen (tmp_pathspec) - 1; |
| 3438 | while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) |
| 3439 | p--; |
| 3440 | if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) |
| 3441 | { |
| 3442 | /* no more DIR_SEPARATORS left */ |
| 3443 | break; |
| 3444 | } |
| 3445 | *p = '\0'; |
| 3446 | } |
| 3447 | else |
| 3448 | { |
| 3449 | char *errstr = strerror (errno); |
| 3450 | lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); |
| 3451 | } |
| 3452 | } |
| 3453 | XFREE (tmp_pathspec); |
| 3454 | |
| 3455 | if (!has_symlinks) |
| 3456 | { |
| 3457 | return xstrdup (pathspec); |
| 3458 | } |
| 3459 | |
| 3460 | tmp_pathspec = realpath (pathspec, buf); |
| 3461 | if (tmp_pathspec == 0) |
| 3462 | { |
| 3463 | lt_fatal ("Could not follow symlinks for %s", pathspec); |
| 3464 | } |
| 3465 | return xstrdup (tmp_pathspec); |
| 3466 | #endif |
| 3467 | } |
| 3468 | |
| 3469 | char * |
| 3470 | strendzap (char *str, const char *pat) |
| 3471 | { |
| 3472 | size_t len, patlen; |
| 3473 | |
| 3474 | assert (str != NULL); |
| 3475 | assert (pat != NULL); |
| 3476 | |
| 3477 | len = strlen (str); |
| 3478 | patlen = strlen (pat); |
| 3479 | |
| 3480 | if (patlen <= len) |
| 3481 | { |
| 3482 | str += len - patlen; |
| 3483 | if (strcmp (str, pat) == 0) |
| 3484 | *str = '\0'; |
| 3485 | } |
| 3486 | return str; |
| 3487 | } |
| 3488 | |
| 3489 | static void |
| 3490 | lt_error_core (int exit_status, const char *mode, |
| 3491 | const char *message, va_list ap) |
| 3492 | { |
| 3493 | fprintf (stderr, "%s: %s: ", program_name, mode); |
| 3494 | vfprintf (stderr, message, ap); |
| 3495 | fprintf (stderr, ".\n"); |
| 3496 | |
| 3497 | if (exit_status >= 0) |
| 3498 | exit (exit_status); |
| 3499 | } |
| 3500 | |
| 3501 | void |
| 3502 | lt_fatal (const char *message, ...) |
| 3503 | { |
| 3504 | va_list ap; |
| 3505 | va_start (ap, message); |
| 3506 | lt_error_core (EXIT_FAILURE, "FATAL", message, ap); |
| 3507 | va_end (ap); |
| 3508 | } |
| 3509 | EOF |
| 3510 | } |
| 3511 | # end: func_emit_cwrapperexe_src |
| 3512 | |
| 3513 | # func_mode_link arg... |
| 3514 | func_mode_link () |
| 3515 | { |
| 3516 | $opt_debug |
| 3517 | case $host in |
| 3518 | *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) |
| 3519 | # It is impossible to link a dll without this setting, and |
| 3520 | # we shouldn't force the makefile maintainer to figure out |
| 3521 | # which system we are compiling for in order to pass an extra |
| 3522 | # flag for every libtool invocation. |
| 3523 | # allow_undefined=no |
| 3524 | |
| 3525 | # FIXME: Unfortunately, there are problems with the above when trying |
| 3526 | # to make a dll which has undefined symbols, in which case not |
| 3527 | # even a static library is built. For now, we need to specify |
| 3528 | # -no-undefined on the libtool link line when we can be certain |
| 3529 | # that all symbols are satisfied, otherwise we get a static library. |
| 3530 | allow_undefined=yes |
| 3531 | ;; |
| 3532 | *) |
| 3533 | allow_undefined=yes |
| 3534 | ;; |
| 3535 | esac |
| 3536 | libtool_args=$nonopt |
| 3537 | base_compile="$nonopt $@" |
| 3538 | compile_command=$nonopt |
| 3539 | finalize_command=$nonopt |
| 3540 | |
| 3541 | compile_rpath= |
| 3542 | finalize_rpath= |
| 3543 | compile_shlibpath= |
| 3544 | finalize_shlibpath= |
| 3545 | convenience= |
| 3546 | old_convenience= |
| 3547 | deplibs= |
| 3548 | old_deplibs= |
| 3549 | compiler_flags= |
| 3550 | linker_flags= |
| 3551 | dllsearchpath= |
| 3552 | lib_search_path=`pwd` |
| 3553 | inst_prefix_dir= |
| 3554 | new_inherited_linker_flags= |
| 3555 | |
| 3556 | avoid_version=no |
| 3557 | dlfiles= |
| 3558 | dlprefiles= |
| 3559 | dlself=no |
| 3560 | export_dynamic=no |
| 3561 | export_symbols= |
| 3562 | export_symbols_regex= |
| 3563 | generated= |
| 3564 | libobjs= |
| 3565 | ltlibs= |
| 3566 | module=no |
| 3567 | no_install=no |
| 3568 | objs= |
| 3569 | non_pic_objects= |
| 3570 | precious_files_regex= |
| 3571 | prefer_static_libs=no |
| 3572 | preload=no |
| 3573 | prev= |
| 3574 | prevarg= |
| 3575 | release= |
| 3576 | rpath= |
| 3577 | xrpath= |
| 3578 | perm_rpath= |
| 3579 | temp_rpath= |
| 3580 | thread_safe=no |
| 3581 | vinfo= |
| 3582 | vinfo_number=no |
| 3583 | weak_libs= |
| 3584 | single_module="${wl}-single_module" |
| 3585 | func_infer_tag $base_compile |
| 3586 | |
| 3587 | # We need to know -static, to get the right output filenames. |
| 3588 | for arg |
| 3589 | do |
| 3590 | case $arg in |
| 3591 | -shared) |
| 3592 | test "$build_libtool_libs" != yes && \ |
| 3593 | func_fatal_configuration "can not build a shared library" |
| 3594 | build_old_libs=no |
| 3595 | break |
| 3596 | ;; |
| 3597 | -all-static | -static | -static-libtool-libs) |
| 3598 | case $arg in |
| 3599 | -all-static) |
| 3600 | if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then |
| 3601 | func_warning "complete static linking is impossible in this configuration" |
| 3602 | fi |
| 3603 | if test -n "$link_static_flag"; then |
| 3604 | dlopen_self=$dlopen_self_static |
| 3605 | fi |
| 3606 | prefer_static_libs=yes |
| 3607 | ;; |
| 3608 | -static) |
| 3609 | if test -z "$pic_flag" && test -n "$link_static_flag"; then |
| 3610 | dlopen_self=$dlopen_self_static |
| 3611 | fi |
| 3612 | prefer_static_libs=built |
| 3613 | ;; |
| 3614 | -static-libtool-libs) |
| 3615 | if test -z "$pic_flag" && test -n "$link_static_flag"; then |
| 3616 | dlopen_self=$dlopen_self_static |
| 3617 | fi |
| 3618 | prefer_static_libs=yes |
| 3619 | ;; |
| 3620 | esac |
| 3621 | build_libtool_libs=no |
| 3622 | build_old_libs=yes |
| 3623 | break |
| 3624 | ;; |
| 3625 | esac |
| 3626 | done |
| 3627 | |
| 3628 | # See if our shared archives depend on static archives. |
| 3629 | test -n "$old_archive_from_new_cmds" && build_old_libs=yes |
| 3630 | |
| 3631 | # Go through the arguments, transforming them on the way. |
| 3632 | while test "$#" -gt 0; do |
| 3633 | arg="$1" |
| 3634 | shift |
| 3635 | func_quote_for_eval "$arg" |
| 3636 | qarg=$func_quote_for_eval_unquoted_result |
| 3637 | func_append libtool_args " $func_quote_for_eval_result" |
| 3638 | |
| 3639 | # If the previous option needs an argument, assign it. |
| 3640 | if test -n "$prev"; then |
| 3641 | case $prev in |
| 3642 | output) |
| 3643 | func_append compile_command " @OUTPUT@" |
| 3644 | func_append finalize_command " @OUTPUT@" |
| 3645 | ;; |
| 3646 | esac |
| 3647 | |
| 3648 | case $prev in |
| 3649 | dlfiles|dlprefiles) |
| 3650 | if test "$preload" = no; then |
| 3651 | # Add the symbol object into the linking commands. |
| 3652 | func_append compile_command " @SYMFILE@" |
| 3653 | func_append finalize_command " @SYMFILE@" |
| 3654 | preload=yes |
| 3655 | fi |
| 3656 | case $arg in |
| 3657 | *.la | *.lo) ;; # We handle these cases below. |
| 3658 | force) |
| 3659 | if test "$dlself" = no; then |
| 3660 | dlself=needless |
| 3661 | export_dynamic=yes |
| 3662 | fi |
| 3663 | prev= |
| 3664 | continue |
| 3665 | ;; |
| 3666 | self) |
| 3667 | if test "$prev" = dlprefiles; then |
| 3668 | dlself=yes |
| 3669 | elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then |
| 3670 | dlself=yes |
| 3671 | else |
| 3672 | dlself=needless |
| 3673 | export_dynamic=yes |
| 3674 | fi |
| 3675 | prev= |
| 3676 | continue |
| 3677 | ;; |
| 3678 | *) |
| 3679 | if test "$prev" = dlfiles; then |
| 3680 | dlfiles="$dlfiles $arg" |
| 3681 | else |
| 3682 | dlprefiles="$dlprefiles $arg" |
| 3683 | fi |
| 3684 | prev= |
| 3685 | continue |
| 3686 | ;; |
| 3687 | esac |
| 3688 | ;; |
| 3689 | expsyms) |
| 3690 | export_symbols="$arg" |
| 3691 | test -f "$arg" \ |
| 3692 | || func_fatal_error "symbol file \`$arg' does not exist" |
| 3693 | prev= |
| 3694 | continue |
| 3695 | ;; |
| 3696 | expsyms_regex) |
| 3697 | export_symbols_regex="$arg" |
| 3698 | prev= |
| 3699 | continue |
| 3700 | ;; |
| 3701 | framework) |
| 3702 | case $host in |
| 3703 | *-*-darwin*) |
| 3704 | case "$deplibs " in |
| 3705 | *" $qarg.ltframework "*) ;; |
| 3706 | *) deplibs="$deplibs $qarg.ltframework" # this is fixed later |
| 3707 | ;; |
| 3708 | esac |
| 3709 | ;; |
| 3710 | esac |
| 3711 | prev= |
| 3712 | continue |
| 3713 | ;; |
| 3714 | inst_prefix) |
| 3715 | inst_prefix_dir="$arg" |
| 3716 | prev= |
| 3717 | continue |
| 3718 | ;; |
| 3719 | objectlist) |
| 3720 | if test -f "$arg"; then |
| 3721 | save_arg=$arg |
| 3722 | moreargs= |
| 3723 | for fil in `cat "$save_arg"` |
| 3724 | do |
| 3725 | # moreargs="$moreargs $fil" |
| 3726 | arg=$fil |
| 3727 | # A libtool-controlled object. |
| 3728 | |
| 3729 | # Check to see that this really is a libtool object. |
| 3730 | if func_lalib_unsafe_p "$arg"; then |
| 3731 | pic_object= |
| 3732 | non_pic_object= |
| 3733 | |
| 3734 | # Read the .lo file |
| 3735 | func_source "$arg" |
| 3736 | |
| 3737 | if test -z "$pic_object" || |
| 3738 | test -z "$non_pic_object" || |
| 3739 | test "$pic_object" = none && |
| 3740 | test "$non_pic_object" = none; then |
| 3741 | func_fatal_error "cannot find name of object for \`$arg'" |
| 3742 | fi |
| 3743 | |
| 3744 | # Extract subdirectory from the argument. |
| 3745 | func_dirname "$arg" "/" "" |
| 3746 | xdir="$func_dirname_result" |
| 3747 | |
| 3748 | if test "$pic_object" != none; then |
| 3749 | # Prepend the subdirectory the object is found in. |
| 3750 | pic_object="$xdir$pic_object" |
| 3751 | |
| 3752 | if test "$prev" = dlfiles; then |
| 3753 | if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then |
| 3754 | dlfiles="$dlfiles $pic_object" |
| 3755 | prev= |
| 3756 | continue |
| 3757 | else |
| 3758 | # If libtool objects are unsupported, then we need to preload. |
| 3759 | prev=dlprefiles |
| 3760 | fi |
| 3761 | fi |
| 3762 | |
| 3763 | # CHECK ME: I think I busted this. -Ossama |
| 3764 | if test "$prev" = dlprefiles; then |
| 3765 | # Preload the old-style object. |
| 3766 | dlprefiles="$dlprefiles $pic_object" |
| 3767 | prev= |
| 3768 | fi |
| 3769 | |
| 3770 | # A PIC object. |
| 3771 | func_append libobjs " $pic_object" |
| 3772 | arg="$pic_object" |
| 3773 | fi |
| 3774 | |
| 3775 | # Non-PIC object. |
| 3776 | if test "$non_pic_object" != none; then |
| 3777 | # Prepend the subdirectory the object is found in. |
| 3778 | non_pic_object="$xdir$non_pic_object" |
| 3779 | |
| 3780 | # A standard non-PIC object |
| 3781 | func_append non_pic_objects " $non_pic_object" |
| 3782 | if test -z "$pic_object" || test "$pic_object" = none ; then |
| 3783 | arg="$non_pic_object" |
| 3784 | fi |
| 3785 | else |
| 3786 | # If the PIC object exists, use it instead. |
| 3787 | # $xdir was prepended to $pic_object above. |
| 3788 | non_pic_object="$pic_object" |
| 3789 | func_append non_pic_objects " $non_pic_object" |
| 3790 | fi |
| 3791 | else |
| 3792 | # Only an error if not doing a dry-run. |
| 3793 | if $opt_dry_run; then |
| 3794 | # Extract subdirectory from the argument. |
| 3795 | func_dirname "$arg" "/" "" |
| 3796 | xdir="$func_dirname_result" |
| 3797 | |
| 3798 | func_lo2o "$arg" |
| 3799 | pic_object=$xdir$objdir/$func_lo2o_result |
| 3800 | non_pic_object=$xdir$func_lo2o_result |
| 3801 | func_append libobjs " $pic_object" |
| 3802 | func_append non_pic_objects " $non_pic_object" |
| 3803 | else |
| 3804 | func_fatal_error "\`$arg' is not a valid libtool object" |
| 3805 | fi |
| 3806 | fi |
| 3807 | done |
| 3808 | else |
| 3809 | func_fatal_error "link input file \`$arg' does not exist" |
| 3810 | fi |
| 3811 | arg=$save_arg |
| 3812 | prev= |
| 3813 | continue |
| 3814 | ;; |
| 3815 | precious_regex) |
| 3816 | precious_files_regex="$arg" |
| 3817 | prev= |
| 3818 | continue |
| 3819 | ;; |
| 3820 | release) |
| 3821 | release="-$arg" |
| 3822 | prev= |
| 3823 | continue |
| 3824 | ;; |
| 3825 | rpath | xrpath) |
| 3826 | # We need an absolute path. |
| 3827 | case $arg in |
| 3828 | [\\/]* | [A-Za-z]:[\\/]*) ;; |
| 3829 | *) |
| 3830 | func_fatal_error "only absolute run-paths are allowed" |
| 3831 | ;; |
| 3832 | esac |
| 3833 | if test "$prev" = rpath; then |
| 3834 | case "$rpath " in |
| 3835 | *" $arg "*) ;; |
| 3836 | *) rpath="$rpath $arg" ;; |
| 3837 | esac |
| 3838 | else |
| 3839 | case "$xrpath " in |
| 3840 | *" $arg "*) ;; |
| 3841 | *) xrpath="$xrpath $arg" ;; |
| 3842 | esac |
| 3843 | fi |
| 3844 | prev= |
| 3845 | continue |
| 3846 | ;; |
| 3847 | shrext) |
| 3848 | shrext_cmds="$arg" |
| 3849 | prev= |
| 3850 | continue |
| 3851 | ;; |
| 3852 | weak) |
| 3853 | weak_libs="$weak_libs $arg" |
| 3854 | prev= |
| 3855 | continue |
| 3856 | ;; |
| 3857 | xcclinker) |
| 3858 | linker_flags="$linker_flags $qarg" |
| 3859 | compiler_flags="$compiler_flags $qarg" |
| 3860 | prev= |
| 3861 | func_append compile_command " $qarg" |
| 3862 | func_append finalize_command " $qarg" |
| 3863 | continue |
| 3864 | ;; |
| 3865 | xcompiler) |
| 3866 | compiler_flags="$compiler_flags $qarg" |
| 3867 | prev= |
| 3868 | func_append compile_command " $qarg" |
| 3869 | func_append finalize_command " $qarg" |
| 3870 | continue |
| 3871 | ;; |
| 3872 | xlinker) |
| 3873 | linker_flags="$linker_flags $qarg" |
| 3874 | compiler_flags="$compiler_flags $wl$qarg" |
| 3875 | prev= |
| 3876 | func_append compile_command " $wl$qarg" |
| 3877 | func_append finalize_command " $wl$qarg" |
| 3878 | continue |
| 3879 | ;; |
| 3880 | *) |
| 3881 | eval "$prev=\"\$arg\"" |
| 3882 | prev= |
| 3883 | continue |
| 3884 | ;; |
| 3885 | esac |
| 3886 | fi # test -n "$prev" |
| 3887 | |
| 3888 | prevarg="$arg" |
| 3889 | |
| 3890 | case $arg in |
| 3891 | -all-static) |
| 3892 | if test -n "$link_static_flag"; then |
| 3893 | # See comment for -static flag below, for more details. |
| 3894 | func_append compile_command " $link_static_flag" |
| 3895 | func_append finalize_command " $link_static_flag" |
| 3896 | fi |
| 3897 | continue |
| 3898 | ;; |
| 3899 | |
| 3900 | -allow-undefined) |
| 3901 | # FIXME: remove this flag sometime in the future. |
| 3902 | func_fatal_error "\`-allow-undefined' must not be used because it is the default" |
| 3903 | ;; |
| 3904 | |
| 3905 | -avoid-version) |
| 3906 | avoid_version=yes |
| 3907 | continue |
| 3908 | ;; |
| 3909 | |
| 3910 | -dlopen) |
| 3911 | prev=dlfiles |
| 3912 | continue |
| 3913 | ;; |
| 3914 | |
| 3915 | -dlpreopen) |
| 3916 | prev=dlprefiles |
| 3917 | continue |
| 3918 | ;; |
| 3919 | |
| 3920 | -export-dynamic) |
| 3921 | export_dynamic=yes |
| 3922 | continue |
| 3923 | ;; |
| 3924 | |
| 3925 | -export-symbols | -export-symbols-regex) |
| 3926 | if test -n "$export_symbols" || test -n "$export_symbols_regex"; then |
| 3927 | func_fatal_error "more than one -exported-symbols argument is not allowed" |
| 3928 | fi |
| 3929 | if test "X$arg" = "X-export-symbols"; then |
| 3930 | prev=expsyms |
| 3931 | else |
| 3932 | prev=expsyms_regex |
| 3933 | fi |
| 3934 | continue |
| 3935 | ;; |
| 3936 | |
| 3937 | -framework) |
| 3938 | prev=framework |
| 3939 | continue |
| 3940 | ;; |
| 3941 | |
| 3942 | -inst-prefix-dir) |
| 3943 | prev=inst_prefix |
| 3944 | continue |
| 3945 | ;; |
| 3946 | |
| 3947 | # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* |
| 3948 | # so, if we see these flags be careful not to treat them like -L |
| 3949 | -L[A-Z][A-Z]*:*) |
| 3950 | case $with_gcc/$host in |
| 3951 | no/*-*-irix* | /*-*-irix*) |
| 3952 | func_append compile_command " $arg" |
| 3953 | func_append finalize_command " $arg" |
| 3954 | ;; |
| 3955 | esac |
| 3956 | continue |
| 3957 | ;; |
| 3958 | |
| 3959 | -L*) |
| 3960 | func_stripname '-L' '' "$arg" |
| 3961 | dir=$func_stripname_result |
| 3962 | # We need an absolute path. |
| 3963 | case $dir in |
| 3964 | [\\/]* | [A-Za-z]:[\\/]*) ;; |
| 3965 | *) |
| 3966 | absdir=`cd "$dir" && pwd` |
| 3967 | test -z "$absdir" && \ |
| 3968 | func_fatal_error "cannot determine absolute directory name of \`$dir'" |
| 3969 | dir="$absdir" |
| 3970 | ;; |
| 3971 | esac |
| 3972 | case "$deplibs " in |
| 3973 | *" -L$dir "*) ;; |
| 3974 | *) |
| 3975 | deplibs="$deplibs -L$dir" |
| 3976 | lib_search_path="$lib_search_path $dir" |
| 3977 | ;; |
| 3978 | esac |
| 3979 | case $host in |
| 3980 | *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) |
| 3981 | testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` |
| 3982 | case :$dllsearchpath: in |
| 3983 | *":$dir:"*) ;; |
| 3984 | *) dllsearchpath="$dllsearchpath:$dir";; |
| 3985 | esac |
| 3986 | case :$dllsearchpath: in |
| 3987 | *":$testbindir:"*) ;; |
| 3988 | *) dllsearchpath="$dllsearchpath:$testbindir";; |
| 3989 | esac |
| 3990 | ;; |
| 3991 | esac |
| 3992 | continue |
| 3993 | ;; |
| 3994 | |
| 3995 | -l*) |
| 3996 | if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then |
| 3997 | case $host in |
| 3998 | *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) |
| 3999 | # These systems don't actually have a C or math library (as such) |
| 4000 | continue |
| 4001 | ;; |
| 4002 | *-*-os2*) |
| 4003 | # These systems don't actually have a C library (as such) |
| 4004 | test "X$arg" = "X-lc" && continue |
| 4005 | ;; |
| 4006 | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) |
| 4007 | # Do not include libc due to us having libc/libc_r. |
| 4008 | test "X$arg" = "X-lc" && continue |
| 4009 | ;; |
| 4010 | *-*-rhapsody* | *-*-darwin1.[012]) |
| 4011 | # Rhapsody C and math libraries are in the System framework |
| 4012 | deplibs="$deplibs System.ltframework" |
| 4013 | continue |
| 4014 | ;; |
| 4015 | *-*-sco3.2v5* | *-*-sco5v6*) |
| 4016 | # Causes problems with __ctype |
| 4017 | test "X$arg" = "X-lc" && continue |
| 4018 | ;; |
| 4019 | *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) |
| 4020 | # Compiler inserts libc in the correct place for threads to work |
| 4021 | test "X$arg" = "X-lc" && continue |
| 4022 | ;; |
| 4023 | esac |
| 4024 | elif test "X$arg" = "X-lc_r"; then |
| 4025 | case $host in |
| 4026 | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) |
| 4027 | # Do not include libc_r directly, use -pthread flag. |
| 4028 | continue |
| 4029 | ;; |
| 4030 | esac |
| 4031 | fi |
| 4032 | deplibs="$deplibs $arg" |
| 4033 | continue |
| 4034 | ;; |
| 4035 | |
| 4036 | -module) |
| 4037 | module=yes |
| 4038 | continue |
| 4039 | ;; |
| 4040 | |
| 4041 | # Tru64 UNIX uses -model [arg] to determine the layout of C++ |
| 4042 | # classes, name mangling, and exception handling. |
| 4043 | # Darwin uses the -arch flag to determine output architecture. |
| 4044 | -model|-arch|-isysroot) |
| 4045 | compiler_flags="$compiler_flags $arg" |
| 4046 | func_append compile_command " $arg" |
| 4047 | func_append finalize_command " $arg" |
| 4048 | prev=xcompiler |
| 4049 | continue |
| 4050 | ;; |
| 4051 | |
| 4052 | -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) |
| 4053 | compiler_flags="$compiler_flags $arg" |
| 4054 | func_append compile_command " $arg" |
| 4055 | func_append finalize_command " $arg" |
| 4056 | case "$new_inherited_linker_flags " in |
| 4057 | *" $arg "*) ;; |
| 4058 | * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; |
| 4059 | esac |
| 4060 | continue |
| 4061 | ;; |
| 4062 | |
| 4063 | -multi_module) |
| 4064 | single_module="${wl}-multi_module" |
| 4065 | continue |
| 4066 | ;; |
| 4067 | |
| 4068 | -no-fast-install) |
| 4069 | fast_install=no |
| 4070 | continue |
| 4071 | ;; |
| 4072 | |
| 4073 | -no-install) |
| 4074 | case $host in |
| 4075 | *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) |
| 4076 | # The PATH hackery in wrapper scripts is required on Windows |
| 4077 | # and Darwin in order for the loader to find any dlls it needs. |
| 4078 | func_warning "\`-no-install' is ignored for $host" |
| 4079 | func_warning "assuming \`-no-fast-install' instead" |
| 4080 | fast_install=no |
| 4081 | ;; |
| 4082 | *) no_install=yes ;; |
| 4083 | esac |
| 4084 | continue |
| 4085 | ;; |
| 4086 | |
| 4087 | -no-undefined) |
| 4088 | allow_undefined=no |
| 4089 | continue |
| 4090 | ;; |
| 4091 | |
| 4092 | -objectlist) |
| 4093 | prev=objectlist |
| 4094 | continue |
| 4095 | ;; |
| 4096 | |
| 4097 | -o) prev=output ;; |
| 4098 | |
| 4099 | -precious-files-regex) |
| 4100 | prev=precious_regex |
| 4101 | continue |
| 4102 | ;; |
| 4103 | |
| 4104 | -release) |
| 4105 | prev=release |
| 4106 | continue |
| 4107 | ;; |
| 4108 | |
| 4109 | -rpath) |
| 4110 | prev=rpath |
| 4111 | continue |
| 4112 | ;; |
| 4113 | |
| 4114 | -R) |
| 4115 | prev=xrpath |
| 4116 | continue |
| 4117 | ;; |
| 4118 | |
| 4119 | -R*) |
| 4120 | func_stripname '-R' '' "$arg" |
| 4121 | dir=$func_stripname_result |
| 4122 | # We need an absolute path. |
| 4123 | case $dir in |
| 4124 | [\\/]* | [A-Za-z]:[\\/]*) ;; |
| 4125 | *) |
| 4126 | func_fatal_error "only absolute run-paths are allowed" |
| 4127 | ;; |
| 4128 | esac |
| 4129 | case "$xrpath " in |
| 4130 | *" $dir "*) ;; |
| 4131 | *) xrpath="$xrpath $dir" ;; |
| 4132 | esac |
| 4133 | continue |
| 4134 | ;; |
| 4135 | |
| 4136 | -shared) |
| 4137 | # The effects of -shared are defined in a previous loop. |
| 4138 | continue |
| 4139 | ;; |
| 4140 | |
| 4141 | -shrext) |
| 4142 | prev=shrext |
| 4143 | continue |
| 4144 | ;; |
| 4145 | |
| 4146 | -static | -static-libtool-libs) |
| 4147 | # The effects of -static are defined in a previous loop. |
| 4148 | # We used to do the same as -all-static on platforms that |
| 4149 | # didn't have a PIC flag, but the assumption that the effects |
| 4150 | # would be equivalent was wrong. It would break on at least |
| 4151 | # Digital Unix and AIX. |
| 4152 | continue |
| 4153 | ;; |
| 4154 | |
| 4155 | -thread-safe) |
| 4156 | thread_safe=yes |
| 4157 | continue |
| 4158 | ;; |
| 4159 | |
| 4160 | -version-info) |
| 4161 | prev=vinfo |
| 4162 | continue |
| 4163 | ;; |
| 4164 | |
| 4165 | -version-number) |
| 4166 | prev=vinfo |
| 4167 | vinfo_number=yes |
| 4168 | continue |
| 4169 | ;; |
| 4170 | |
| 4171 | -weak) |
| 4172 | prev=weak |
| 4173 | continue |
| 4174 | ;; |
| 4175 | |
| 4176 | -Wc,*) |
| 4177 | func_stripname '-Wc,' '' "$arg" |
| 4178 | args=$func_stripname_result |
| 4179 | arg= |
| 4180 | save_ifs="$IFS"; IFS=',' |
| 4181 | for flag in $args; do |
| 4182 | IFS="$save_ifs" |
| 4183 | func_quote_for_eval "$flag" |
| 4184 | arg="$arg $wl$func_quote_for_eval_result" |
| 4185 | compiler_flags="$compiler_flags $func_quote_for_eval_result" |
| 4186 | done |
| 4187 | IFS="$save_ifs" |
| 4188 | func_stripname ' ' '' "$arg" |
| 4189 | arg=$func_stripname_result |
| 4190 | ;; |
| 4191 | |
| 4192 | -Wl,*) |
| 4193 | func_stripname '-Wl,' '' "$arg" |
| 4194 | args=$func_stripname_result |
| 4195 | arg= |
| 4196 | save_ifs="$IFS"; IFS=',' |
| 4197 | for flag in $args; do |
| 4198 | IFS="$save_ifs" |
| 4199 | func_quote_for_eval "$flag" |
| 4200 | arg="$arg $wl$func_quote_for_eval_result" |
| 4201 | compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" |
| 4202 | linker_flags="$linker_flags $func_quote_for_eval_result" |
| 4203 | done |
| 4204 | IFS="$save_ifs" |
| 4205 | func_stripname ' ' '' "$arg" |
| 4206 | arg=$func_stripname_result |
| 4207 | ;; |
| 4208 | |
| 4209 | -Xcompiler) |
| 4210 | prev=xcompiler |
| 4211 | continue |
| 4212 | ;; |
| 4213 | |
| 4214 | -Xlinker) |
| 4215 | prev=xlinker |
| 4216 | continue |
| 4217 | ;; |
| 4218 | |
| 4219 | -XCClinker) |
| 4220 | prev=xcclinker |
| 4221 | continue |
| 4222 | ;; |
| 4223 | |
| 4224 | # -msg_* for osf cc |
| 4225 | -msg_*) |
| 4226 | func_quote_for_eval "$arg" |
| 4227 | arg="$func_quote_for_eval_result" |
| 4228 | ;; |
| 4229 | |
| 4230 | # -64, -mips[0-9] enable 64-bit mode on the SGI compiler |
| 4231 | # -r[0-9][0-9]* specifies the processor on the SGI compiler |
| 4232 | # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler |
| 4233 | # +DA*, +DD* enable 64-bit mode on the HP compiler |
| 4234 | # -q* pass through compiler args for the IBM compiler |
| 4235 | # -m*, -t[45]*, -txscale* pass through architecture-specific |
| 4236 | # compiler args for GCC |
| 4237 | # -F/path gives path to uninstalled frameworks, gcc on darwin |
| 4238 | # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC |
| 4239 | # @file GCC response files |
| 4240 | -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ |
| 4241 | -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) |
| 4242 | func_quote_for_eval "$arg" |
| 4243 | arg="$func_quote_for_eval_result" |
| 4244 | func_append compile_command " $arg" |
| 4245 | func_append finalize_command " $arg" |
| 4246 | compiler_flags="$compiler_flags $arg" |
| 4247 | continue |
| 4248 | ;; |
| 4249 | |
| 4250 | # Some other compiler flag. |
| 4251 | -* | +*) |
| 4252 | func_quote_for_eval "$arg" |
| 4253 | arg="$func_quote_for_eval_result" |
| 4254 | ;; |
| 4255 | |
| 4256 | *.$objext) |
| 4257 | # A standard object. |
| 4258 | objs="$objs $arg" |
| 4259 | ;; |
| 4260 | |
| 4261 | *.lo) |
| 4262 | # A libtool-controlled object. |
| 4263 | |
| 4264 | # Check to see that this really is a libtool object. |
| 4265 | if func_lalib_unsafe_p "$arg"; then |
| 4266 | pic_object= |
| 4267 | non_pic_object= |
| 4268 | |
| 4269 | # Read the .lo file |
| 4270 | func_source "$arg" |
| 4271 | |
| 4272 | if test -z "$pic_object" || |
| 4273 | test -z "$non_pic_object" || |
| 4274 | test "$pic_object" = none && |
| 4275 | test "$non_pic_object" = none; then |
| 4276 | func_fatal_error "cannot find name of object for \`$arg'" |
| 4277 | fi |
| 4278 | |
| 4279 | # Extract subdirectory from the argument. |
| 4280 | func_dirname "$arg" "/" "" |
| 4281 | xdir="$func_dirname_result" |
| 4282 | |
| 4283 | if test "$pic_object" != none; then |
| 4284 | # Prepend the subdirectory the object is found in. |
| 4285 | pic_object="$xdir$pic_object" |
| 4286 | |
| 4287 | if test "$prev" = dlfiles; then |
| 4288 | if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then |
| 4289 | dlfiles="$dlfiles $pic_object" |
| 4290 | prev= |
| 4291 | continue |
| 4292 | else |
| 4293 | # If libtool objects are unsupported, then we need to preload. |
| 4294 | prev=dlprefiles |
| 4295 | fi |
| 4296 | fi |
| 4297 | |
| 4298 | # CHECK ME: I think I busted this. -Ossama |
| 4299 | if test "$prev" = dlprefiles; then |
| 4300 | # Preload the old-style object. |
| 4301 | dlprefiles="$dlprefiles $pic_object" |
| 4302 | prev= |
| 4303 | fi |
| 4304 | |
| 4305 | # A PIC object. |
| 4306 | func_append libobjs " $pic_object" |
| 4307 | arg="$pic_object" |
| 4308 | fi |
| 4309 | |
| 4310 | # Non-PIC object. |
| 4311 | if test "$non_pic_object" != none; then |
| 4312 | # Prepend the subdirectory the object is found in. |
| 4313 | non_pic_object="$xdir$non_pic_object" |
| 4314 | |
| 4315 | # A standard non-PIC object |
| 4316 | func_append non_pic_objects " $non_pic_object" |
| 4317 | if test -z "$pic_object" || test "$pic_object" = none ; then |
| 4318 | arg="$non_pic_object" |
| 4319 | fi |
| 4320 | else |
| 4321 | # If the PIC object exists, use it instead. |
| 4322 | # $xdir was prepended to $pic_object above. |
| 4323 | non_pic_object="$pic_object" |
| 4324 | func_append non_pic_objects " $non_pic_object" |
| 4325 | fi |
| 4326 | else |
| 4327 | # Only an error if not doing a dry-run. |
| 4328 | if $opt_dry_run; then |
| 4329 | # Extract subdirectory from the argument. |
| 4330 | func_dirname "$arg" "/" "" |
| 4331 | xdir="$func_dirname_result" |
| 4332 | |
| 4333 | func_lo2o "$arg" |
| 4334 | pic_object=$xdir$objdir/$func_lo2o_result |
| 4335 | non_pic_object=$xdir$func_lo2o_result |
| 4336 | func_append libobjs " $pic_object" |
| 4337 | func_append non_pic_objects " $non_pic_object" |
| 4338 | else |
| 4339 | func_fatal_error "\`$arg' is not a valid libtool object" |
| 4340 | fi |
| 4341 | fi |
| 4342 | ;; |
| 4343 | |
| 4344 | *.$libext) |
| 4345 | # An archive. |
| 4346 | deplibs="$deplibs $arg" |
| 4347 | old_deplibs="$old_deplibs $arg" |
| 4348 | continue |
| 4349 | ;; |
| 4350 | |
| 4351 | *.la) |
| 4352 | # A libtool-controlled library. |
| 4353 | |
| 4354 | if test "$prev" = dlfiles; then |
| 4355 | # This library was specified with -dlopen. |
| 4356 | dlfiles="$dlfiles $arg" |
| 4357 | prev= |
| 4358 | elif test "$prev" = dlprefiles; then |
| 4359 | # The library was specified with -dlpreopen. |
| 4360 | dlprefiles="$dlprefiles $arg" |
| 4361 | prev= |
| 4362 | else |
| 4363 | deplibs="$deplibs $arg" |
| 4364 | fi |
| 4365 | continue |
| 4366 | ;; |
| 4367 | |
| 4368 | # Some other compiler argument. |
| 4369 | *) |
| 4370 | # Unknown arguments in both finalize_command and compile_command need |
| 4371 | # to be aesthetically quoted because they are evaled later. |
| 4372 | func_quote_for_eval "$arg" |
| 4373 | arg="$func_quote_for_eval_result" |
| 4374 | ;; |
| 4375 | esac # arg |
| 4376 | |
| 4377 | # Now actually substitute the argument into the commands. |
| 4378 | if test -n "$arg"; then |
| 4379 | func_append compile_command " $arg" |
| 4380 | func_append finalize_command " $arg" |
| 4381 | fi |
| 4382 | done # argument parsing loop |
| 4383 | |
| 4384 | test -n "$prev" && \ |
| 4385 | func_fatal_help "the \`$prevarg' option requires an argument" |
| 4386 | |
| 4387 | if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then |
| 4388 | eval arg=\"$export_dynamic_flag_spec\" |
| 4389 | func_append compile_command " $arg" |
| 4390 | func_append finalize_command " $arg" |
| 4391 | fi |
| 4392 | |
| 4393 | oldlibs= |
| 4394 | # calculate the name of the file, without its directory |
| 4395 | func_basename "$output" |
| 4396 | outputname="$func_basename_result" |
| 4397 | libobjs_save="$libobjs" |
| 4398 | |
| 4399 | if test -n "$shlibpath_var"; then |
| 4400 | # get the directories listed in $shlibpath_var |
| 4401 | eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` |
| 4402 | else |
| 4403 | shlib_search_path= |
| 4404 | fi |
| 4405 | eval sys_lib_search_path=\"$sys_lib_search_path_spec\" |
| 4406 | eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" |
| 4407 | |
| 4408 | func_dirname "$output" "/" "" |
| 4409 | output_objdir="$func_dirname_result$objdir" |
| 4410 | # Create the object directory. |
| 4411 | func_mkdir_p "$output_objdir" |
| 4412 | |
| 4413 | # Determine the type of output |
| 4414 | case $output in |
| 4415 | "") |
| 4416 | func_fatal_help "you must specify an output file" |
| 4417 | ;; |
| 4418 | *.$libext) linkmode=oldlib ;; |
| 4419 | *.lo | *.$objext) linkmode=obj ;; |
| 4420 | *.la) linkmode=lib ;; |
| 4421 | *) linkmode=prog ;; # Anything else should be a program. |
| 4422 | esac |
| 4423 | |
| 4424 | specialdeplibs= |
| 4425 | |
| 4426 | libs= |
| 4427 | # Find all interdependent deplibs by searching for libraries |
| 4428 | # that are linked more than once (e.g. -la -lb -la) |
| 4429 | for deplib in $deplibs; do |
| 4430 | if $opt_duplicate_deps ; then |
| 4431 | case "$libs " in |
| 4432 | *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; |
| 4433 | esac |
| 4434 | fi |
| 4435 | libs="$libs $deplib" |
| 4436 | done |
| 4437 | |
| 4438 | if test "$linkmode" = lib; then |
| 4439 | libs="$predeps $libs $compiler_lib_search_path $postdeps" |
| 4440 | |
| 4441 | # Compute libraries that are listed more than once in $predeps |
| 4442 | # $postdeps and mark them as special (i.e., whose duplicates are |
| 4443 | # not to be eliminated). |
| 4444 | pre_post_deps= |
| 4445 | if $opt_duplicate_compiler_generated_deps; then |
| 4446 | for pre_post_dep in $predeps $postdeps; do |
| 4447 | case "$pre_post_deps " in |
| 4448 | *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; |
| 4449 | esac |
| 4450 | pre_post_deps="$pre_post_deps $pre_post_dep" |
| 4451 | done |
| 4452 | fi |
| 4453 | pre_post_deps= |
| 4454 | fi |
| 4455 | |
| 4456 | deplibs= |
| 4457 | newdependency_libs= |
| 4458 | newlib_search_path= |
| 4459 | need_relink=no # whether we're linking any uninstalled libtool libraries |
| 4460 | notinst_deplibs= # not-installed libtool libraries |
| 4461 | notinst_path= # paths that contain not-installed libtool libraries |
| 4462 | |
| 4463 | case $linkmode in |
| 4464 | lib) |
| 4465 | passes="conv dlpreopen link" |
| 4466 | for file in $dlfiles $dlprefiles; do |
| 4467 | case $file in |
| 4468 | *.la) ;; |
| 4469 | *) |
| 4470 | func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" |
| 4471 | ;; |
| 4472 | esac |
| 4473 | done |
| 4474 | ;; |
| 4475 | prog) |
| 4476 | compile_deplibs= |
| 4477 | finalize_deplibs= |
| 4478 | alldeplibs=no |
| 4479 | newdlfiles= |
| 4480 | newdlprefiles= |
| 4481 | passes="conv scan dlopen dlpreopen link" |
| 4482 | ;; |
| 4483 | *) passes="conv" |
| 4484 | ;; |
| 4485 | esac |
| 4486 | |
| 4487 | for pass in $passes; do |
| 4488 | # The preopen pass in lib mode reverses $deplibs; put it back here |
| 4489 | # so that -L comes before libs that need it for instance... |
| 4490 | if test "$linkmode,$pass" = "lib,link"; then |
| 4491 | ## FIXME: Find the place where the list is rebuilt in the wrong |
| 4492 | ## order, and fix it there properly |
| 4493 | tmp_deplibs= |
| 4494 | for deplib in $deplibs; do |
| 4495 | tmp_deplibs="$deplib $tmp_deplibs" |
| 4496 | done |
| 4497 | deplibs="$tmp_deplibs" |
| 4498 | fi |
| 4499 | |
| 4500 | if test "$linkmode,$pass" = "lib,link" || |
| 4501 | test "$linkmode,$pass" = "prog,scan"; then |
| 4502 | libs="$deplibs" |
| 4503 | deplibs= |
| 4504 | fi |
| 4505 | if test "$linkmode" = prog; then |
| 4506 | case $pass in |
| 4507 | dlopen) libs="$dlfiles" ;; |
| 4508 | dlpreopen) libs="$dlprefiles" ;; |
| 4509 | link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; |
| 4510 | esac |
| 4511 | fi |
| 4512 | if test "$linkmode,$pass" = "lib,dlpreopen"; then |
| 4513 | # Collect and forward deplibs of preopened libtool libs |
| 4514 | for lib in $dlprefiles; do |
| 4515 | # Ignore non-libtool-libs |
| 4516 | dependency_libs= |
| 4517 | case $lib in |
| 4518 | *.la) func_source "$lib" ;; |
| 4519 | esac |
| 4520 | |
| 4521 | # Collect preopened libtool deplibs, except any this library |
| 4522 | # has declared as weak libs |
| 4523 | for deplib in $dependency_libs; do |
| 4524 | deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` |
| 4525 | case " $weak_libs " in |
| 4526 | *" $deplib_base "*) ;; |
| 4527 | *) deplibs="$deplibs $deplib" ;; |
| 4528 | esac |
| 4529 | done |
| 4530 | done |
| 4531 | libs="$dlprefiles" |
| 4532 | fi |
| 4533 | if test "$pass" = dlopen; then |
| 4534 | # Collect dlpreopened libraries |
| 4535 | save_deplibs="$deplibs" |
| 4536 | deplibs= |
| 4537 | fi |
| 4538 | |
| 4539 | for deplib in $libs; do |
| 4540 | lib= |
| 4541 | found=no |
| 4542 | case $deplib in |
| 4543 | -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) |
| 4544 | if test "$linkmode,$pass" = "prog,link"; then |
| 4545 | compile_deplibs="$deplib $compile_deplibs" |
| 4546 | finalize_deplibs="$deplib $finalize_deplibs" |
| 4547 | else |
| 4548 | compiler_flags="$compiler_flags $deplib" |
| 4549 | if test "$linkmode" = lib ; then |
| 4550 | case "$new_inherited_linker_flags " in |
| 4551 | *" $deplib "*) ;; |
| 4552 | * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; |
| 4553 | esac |
| 4554 | fi |
| 4555 | fi |
| 4556 | continue |
| 4557 | ;; |
| 4558 | -l*) |
| 4559 | if test "$linkmode" != lib && test "$linkmode" != prog; then |
| 4560 | func_warning "\`-l' is ignored for archives/objects" |
| 4561 | continue |
| 4562 | fi |
| 4563 | func_stripname '-l' '' "$deplib" |
| 4564 | name=$func_stripname_result |
| 4565 | if test "$linkmode" = lib; then |
| 4566 | searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" |
| 4567 | else |
| 4568 | searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" |
| 4569 | fi |
| 4570 | for searchdir in $searchdirs; do |
| 4571 | for search_ext in .la $std_shrext .so .a; do |
| 4572 | # Search the libtool library |
| 4573 | lib="$searchdir/lib${name}${search_ext}" |
| 4574 | if test -f "$lib"; then |
| 4575 | if test "$search_ext" = ".la"; then |
| 4576 | found=yes |
| 4577 | else |
| 4578 | found=no |
| 4579 | fi |
| 4580 | break 2 |
| 4581 | fi |
| 4582 | done |
| 4583 | done |
| 4584 | if test "$found" != yes; then |
| 4585 | # deplib doesn't seem to be a libtool library |
| 4586 | if test "$linkmode,$pass" = "prog,link"; then |
| 4587 | compile_deplibs="$deplib $compile_deplibs" |
| 4588 | finalize_deplibs="$deplib $finalize_deplibs" |
| 4589 | else |
| 4590 | deplibs="$deplib $deplibs" |
| 4591 | test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" |
| 4592 | fi |
| 4593 | continue |
| 4594 | else # deplib is a libtool library |
| 4595 | # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, |
| 4596 | # We need to do some special things here, and not later. |
| 4597 | if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then |
| 4598 | case " $predeps $postdeps " in |
| 4599 | *" $deplib "*) |
| 4600 | if func_lalib_p "$lib"; then |
| 4601 | library_names= |
| 4602 | old_library= |
| 4603 | func_source "$lib" |
| 4604 | for l in $old_library $library_names; do |
| 4605 | ll="$l" |
| 4606 | done |
| 4607 | if test "X$ll" = "X$old_library" ; then # only static version available |
| 4608 | found=no |
| 4609 | func_dirname "$lib" "" "." |
| 4610 | ladir="$func_dirname_result" |
| 4611 | lib=$ladir/$old_library |
| 4612 | if test "$linkmode,$pass" = "prog,link"; then |
| 4613 | compile_deplibs="$deplib $compile_deplibs" |
| 4614 | finalize_deplibs="$deplib $finalize_deplibs" |
| 4615 | else |
| 4616 | deplibs="$deplib $deplibs" |
| 4617 | test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" |
| 4618 | fi |
| 4619 | continue |
| 4620 | fi |
| 4621 | fi |
| 4622 | ;; |
| 4623 | *) ;; |
| 4624 | esac |
| 4625 | fi |
| 4626 | fi |
| 4627 | ;; # -l |
| 4628 | *.ltframework) |
| 4629 | if test "$linkmode,$pass" = "prog,link"; then |
| 4630 | compile_deplibs="$deplib $compile_deplibs" |
| 4631 | finalize_deplibs="$deplib $finalize_deplibs" |
| 4632 | else |
| 4633 | deplibs="$deplib $deplibs" |
| 4634 | if test "$linkmode" = lib ; then |
| 4635 | case "$new_inherited_linker_flags " in |
| 4636 | *" $deplib "*) ;; |
| 4637 | * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; |
| 4638 | esac |
| 4639 | fi |
| 4640 | fi |
| 4641 | continue |
| 4642 | ;; |
| 4643 | -L*) |
| 4644 | case $linkmode in |
| 4645 | lib) |
| 4646 | deplibs="$deplib $deplibs" |
| 4647 | test "$pass" = conv && continue |
| 4648 | newdependency_libs="$deplib $newdependency_libs" |
| 4649 | func_stripname '-L' '' "$deplib" |
| 4650 | newlib_search_path="$newlib_search_path $func_stripname_result" |
| 4651 | ;; |
| 4652 | prog) |
| 4653 | if test "$pass" = conv; then |
| 4654 | deplibs="$deplib $deplibs" |
| 4655 | continue |
| 4656 | fi |
| 4657 | if test "$pass" = scan; then |
| 4658 | deplibs="$deplib $deplibs" |
| 4659 | else |
| 4660 | compile_deplibs="$deplib $compile_deplibs" |
| 4661 | finalize_deplibs="$deplib $finalize_deplibs" |
| 4662 | fi |
| 4663 | func_stripname '-L' '' "$deplib" |
| 4664 | newlib_search_path="$newlib_search_path $func_stripname_result" |
| 4665 | ;; |
| 4666 | *) |
| 4667 | func_warning "\`-L' is ignored for archives/objects" |
| 4668 | ;; |
| 4669 | esac # linkmode |
| 4670 | continue |
| 4671 | ;; # -L |
| 4672 | -R*) |
| 4673 | if test "$pass" = link; then |
| 4674 | func_stripname '-R' '' "$deplib" |
| 4675 | dir=$func_stripname_result |
| 4676 | # Make sure the xrpath contains only unique directories. |
| 4677 | case "$xrpath " in |
| 4678 | *" $dir "*) ;; |
| 4679 | *) xrpath="$xrpath $dir" ;; |
| 4680 | esac |
| 4681 | fi |
| 4682 | deplibs="$deplib $deplibs" |
| 4683 | continue |
| 4684 | ;; |
| 4685 | *.la) lib="$deplib" ;; |
| 4686 | *.$libext) |
| 4687 | if test "$pass" = conv; then |
| 4688 | deplibs="$deplib $deplibs" |
| 4689 | continue |
| 4690 | fi |
| 4691 | case $linkmode in |
| 4692 | lib) |
| 4693 | # Linking convenience modules into shared libraries is allowed, |
| 4694 | # but linking other static libraries is non-portable. |
| 4695 | case " $dlpreconveniencelibs " in |
| 4696 | *" $deplib "*) ;; |
| 4697 | *) |
| 4698 | valid_a_lib=no |
| 4699 | case $deplibs_check_method in |
| 4700 | match_pattern*) |
| 4701 | set dummy $deplibs_check_method; shift |
| 4702 | match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` |
| 4703 | if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ |
| 4704 | | $EGREP "$match_pattern_regex" > /dev/null; then |
| 4705 | valid_a_lib=yes |
| 4706 | fi |
| 4707 | ;; |
| 4708 | pass_all) |
| 4709 | valid_a_lib=yes |
| 4710 | ;; |
| 4711 | esac |
| 4712 | if test "$valid_a_lib" != yes; then |
| 4713 | $ECHO |
| 4714 | $ECHO "*** Warning: Trying to link with static lib archive $deplib." |
| 4715 | $ECHO "*** I have the capability to make that library automatically link in when" |
| 4716 | $ECHO "*** you link to this library. But I can only do this if you have a" |
| 4717 | $ECHO "*** shared version of the library, which you do not appear to have" |
| 4718 | $ECHO "*** because the file extensions .$libext of this argument makes me believe" |
| 4719 | $ECHO "*** that it is just a static archive that I should not use here." |
| 4720 | else |
| 4721 | $ECHO |
| 4722 | $ECHO "*** Warning: Linking the shared library $output against the" |
| 4723 | $ECHO "*** static library $deplib is not portable!" |
| 4724 | deplibs="$deplib $deplibs" |
| 4725 | fi |
| 4726 | ;; |
| 4727 | esac |
| 4728 | continue |
| 4729 | ;; |
| 4730 | prog) |
| 4731 | if test "$pass" != link; then |
| 4732 | deplibs="$deplib $deplibs" |
| 4733 | else |
| 4734 | compile_deplibs="$deplib $compile_deplibs" |
| 4735 | finalize_deplibs="$deplib $finalize_deplibs" |
| 4736 | fi |
| 4737 | continue |
| 4738 | ;; |
| 4739 | esac # linkmode |
| 4740 | ;; # *.$libext |
| 4741 | *.lo | *.$objext) |
| 4742 | if test "$pass" = conv; then |
| 4743 | deplibs="$deplib $deplibs" |
| 4744 | elif test "$linkmode" = prog; then |
| 4745 | if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then |
| 4746 | # If there is no dlopen support or we're linking statically, |
| 4747 | # we need to preload. |
| 4748 | newdlprefiles="$newdlprefiles $deplib" |
| 4749 | compile_deplibs="$deplib $compile_deplibs" |
| 4750 | finalize_deplibs="$deplib $finalize_deplibs" |
| 4751 | else |
| 4752 | newdlfiles="$newdlfiles $deplib" |
| 4753 | fi |
| 4754 | fi |
| 4755 | continue |
| 4756 | ;; |
| 4757 | %DEPLIBS%) |
| 4758 | alldeplibs=yes |
| 4759 | continue |
| 4760 | ;; |
| 4761 | esac # case $deplib |
| 4762 | |
| 4763 | if test "$found" = yes || test -f "$lib"; then : |
| 4764 | else |
| 4765 | func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" |
| 4766 | fi |
| 4767 | |
| 4768 | # Check to see that this really is a libtool archive. |
| 4769 | func_lalib_unsafe_p "$lib" \ |
| 4770 | || func_fatal_error "\`$lib' is not a valid libtool archive" |
| 4771 | |
| 4772 | func_dirname "$lib" "" "." |
| 4773 | ladir="$func_dirname_result" |
| 4774 | |
| 4775 | dlname= |
| 4776 | dlopen= |
| 4777 | dlpreopen= |
| 4778 | libdir= |
| 4779 | library_names= |
| 4780 | old_library= |
| 4781 | inherited_linker_flags= |
| 4782 | # If the library was installed with an old release of libtool, |
| 4783 | # it will not redefine variables installed, or shouldnotlink |
| 4784 | installed=yes |
| 4785 | shouldnotlink=no |
| 4786 | avoidtemprpath= |
| 4787 | |
| 4788 | |
| 4789 | # Read the .la file |
| 4790 | func_source "$lib" |
| 4791 | |
| 4792 | # Convert "-framework foo" to "foo.ltframework" |
| 4793 | if test -n "$inherited_linker_flags"; then |
| 4794 | tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` |
| 4795 | for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do |
| 4796 | case " $new_inherited_linker_flags " in |
| 4797 | *" $tmp_inherited_linker_flag "*) ;; |
| 4798 | *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; |
| 4799 | esac |
| 4800 | done |
| 4801 | fi |
| 4802 | dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` |
| 4803 | if test "$linkmode,$pass" = "lib,link" || |
| 4804 | test "$linkmode,$pass" = "prog,scan" || |
| 4805 | { test "$linkmode" != prog && test "$linkmode" != lib; }; then |
| 4806 | test -n "$dlopen" && dlfiles="$dlfiles $dlopen" |
| 4807 | test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" |
| 4808 | fi |
| 4809 | |
| 4810 | if test "$pass" = conv; then |
| 4811 | # Only check for convenience libraries |
| 4812 | deplibs="$lib $deplibs" |
| 4813 | if test -z "$libdir"; then |
| 4814 | if test -z "$old_library"; then |
| 4815 | func_fatal_error "cannot find name of link library for \`$lib'" |
| 4816 | fi |
| 4817 | # It is a libtool convenience library, so add in its objects. |
| 4818 | convenience="$convenience $ladir/$objdir/$old_library" |
| 4819 | old_convenience="$old_convenience $ladir/$objdir/$old_library" |
| 4820 | elif test "$linkmode" != prog && test "$linkmode" != lib; then |
| 4821 | func_fatal_error "\`$lib' is not a convenience library" |
| 4822 | fi |
| 4823 | tmp_libs= |
| 4824 | for deplib in $dependency_libs; do |
| 4825 | deplibs="$deplib $deplibs" |
| 4826 | if $opt_duplicate_deps ; then |
| 4827 | case "$tmp_libs " in |
| 4828 | *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; |
| 4829 | esac |
| 4830 | fi |
| 4831 | tmp_libs="$tmp_libs $deplib" |
| 4832 | done |
| 4833 | continue |
| 4834 | fi # $pass = conv |
| 4835 | |
| 4836 | |
| 4837 | # Get the name of the library we link against. |
| 4838 | linklib= |
| 4839 | for l in $old_library $library_names; do |
| 4840 | linklib="$l" |
| 4841 | done |
| 4842 | if test -z "$linklib"; then |
| 4843 | func_fatal_error "cannot find name of link library for \`$lib'" |
| 4844 | fi |
| 4845 | |
| 4846 | # This library was specified with -dlopen. |
| 4847 | if test "$pass" = dlopen; then |
| 4848 | if test -z "$libdir"; then |
| 4849 | func_fatal_error "cannot -dlopen a convenience library: \`$lib'" |
| 4850 | fi |
| 4851 | if test -z "$dlname" || |
| 4852 | test "$dlopen_support" != yes || |
| 4853 | test "$build_libtool_libs" = no; then |
| 4854 | # If there is no dlname, no dlopen support or we're linking |
| 4855 | # statically, we need to preload. We also need to preload any |
| 4856 | # dependent libraries so libltdl's deplib preloader doesn't |
| 4857 | # bomb out in the load deplibs phase. |
| 4858 | dlprefiles="$dlprefiles $lib $dependency_libs" |
| 4859 | else |
| 4860 | newdlfiles="$newdlfiles $lib" |
| 4861 | fi |
| 4862 | continue |
| 4863 | fi # $pass = dlopen |
| 4864 | |
| 4865 | # We need an absolute path. |
| 4866 | case $ladir in |
| 4867 | [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; |
| 4868 | *) |
| 4869 | abs_ladir=`cd "$ladir" && pwd` |
| 4870 | if test -z "$abs_ladir"; then |
| 4871 | func_warning "cannot determine absolute directory name of \`$ladir'" |
| 4872 | func_warning "passing it literally to the linker, although it might fail" |
| 4873 | abs_ladir="$ladir" |
| 4874 | fi |
| 4875 | ;; |
| 4876 | esac |
| 4877 | func_basename "$lib" |
| 4878 | laname="$func_basename_result" |
| 4879 | |
| 4880 | # Find the relevant object directory and library name. |
| 4881 | if test "X$installed" = Xyes; then |
| 4882 | if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then |
| 4883 | func_warning "library \`$lib' was moved." |
| 4884 | dir="$ladir" |
| 4885 | absdir="$abs_ladir" |
| 4886 | libdir="$abs_ladir" |
| 4887 | else |
| 4888 | dir="$libdir" |
| 4889 | absdir="$libdir" |
| 4890 | fi |
| 4891 | test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes |
| 4892 | else |
| 4893 | if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then |
| 4894 | dir="$ladir" |
| 4895 | absdir="$abs_ladir" |
| 4896 | # Remove this search path later |
| 4897 | notinst_path="$notinst_path $abs_ladir" |
| 4898 | else |
| 4899 | dir="$ladir/$objdir" |
| 4900 | absdir="$abs_ladir/$objdir" |
| 4901 | # Remove this search path later |
| 4902 | notinst_path="$notinst_path $abs_ladir" |
| 4903 | fi |
| 4904 | fi # $installed = yes |
| 4905 | func_stripname 'lib' '.la' "$laname" |
| 4906 | name=$func_stripname_result |
| 4907 | |
| 4908 | # This library was specified with -dlpreopen. |
| 4909 | if test "$pass" = dlpreopen; then |
| 4910 | if test -z "$libdir" && test "$linkmode" = prog; then |
| 4911 | func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" |
| 4912 | fi |
| 4913 | # Prefer using a static library (so that no silly _DYNAMIC symbols |
| 4914 | # are required to link). |
| 4915 | if test -n "$old_library"; then |
| 4916 | newdlprefiles="$newdlprefiles $dir/$old_library" |
| 4917 | # Keep a list of preopened convenience libraries to check |
| 4918 | # that they are being used correctly in the link pass. |
| 4919 | test -z "$libdir" && \ |
| 4920 | dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" |
| 4921 | # Otherwise, use the dlname, so that lt_dlopen finds it. |
| 4922 | elif test -n "$dlname"; then |
| 4923 | newdlprefiles="$newdlprefiles $dir/$dlname" |
| 4924 | else |
| 4925 | newdlprefiles="$newdlprefiles $dir/$linklib" |
| 4926 | fi |
| 4927 | fi # $pass = dlpreopen |
| 4928 | |
| 4929 | if test -z "$libdir"; then |
| 4930 | # Link the convenience library |
| 4931 | if test "$linkmode" = lib; then |
| 4932 | deplibs="$dir/$old_library $deplibs" |
| 4933 | elif test "$linkmode,$pass" = "prog,link"; then |
| 4934 | compile_deplibs="$dir/$old_library $compile_deplibs" |
| 4935 | finalize_deplibs="$dir/$old_library $finalize_deplibs" |
| 4936 | else |
| 4937 | deplibs="$lib $deplibs" # used for prog,scan pass |
| 4938 | fi |
| 4939 | continue |
| 4940 | fi |
| 4941 | |
| 4942 | |
| 4943 | if test "$linkmode" = prog && test "$pass" != link; then |
| 4944 | newlib_search_path="$newlib_search_path $ladir" |
| 4945 | deplibs="$lib $deplibs" |
| 4946 | |
| 4947 | linkalldeplibs=no |
| 4948 | if test "$link_all_deplibs" != no || test -z "$library_names" || |
| 4949 | test "$build_libtool_libs" = no; then |
| 4950 | linkalldeplibs=yes |
| 4951 | fi |
| 4952 | |
| 4953 | tmp_libs= |
| 4954 | for deplib in $dependency_libs; do |
| 4955 | case $deplib in |
| 4956 | -L*) func_stripname '-L' '' "$deplib" |
| 4957 | newlib_search_path="$newlib_search_path $func_stripname_result" |
| 4958 | ;; |
| 4959 | esac |
| 4960 | # Need to link against all dependency_libs? |
| 4961 | if test "$linkalldeplibs" = yes; then |
| 4962 | deplibs="$deplib $deplibs" |
| 4963 | else |
| 4964 | # Need to hardcode shared library paths |
| 4965 | # or/and link against static libraries |
| 4966 | newdependency_libs="$deplib $newdependency_libs" |
| 4967 | fi |
| 4968 | if $opt_duplicate_deps ; then |
| 4969 | case "$tmp_libs " in |
| 4970 | *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; |
| 4971 | esac |
| 4972 | fi |
| 4973 | tmp_libs="$tmp_libs $deplib" |
| 4974 | done # for deplib |
| 4975 | continue |
| 4976 | fi # $linkmode = prog... |
| 4977 | |
| 4978 | if test "$linkmode,$pass" = "prog,link"; then |
| 4979 | if test -n "$library_names" && |
| 4980 | { { test "$prefer_static_libs" = no || |
| 4981 | test "$prefer_static_libs,$installed" = "built,yes"; } || |
| 4982 | test -z "$old_library"; }; then |
| 4983 | # We need to hardcode the library path |
| 4984 | if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then |
| 4985 | # Make sure the rpath contains only unique directories. |
| 4986 | case "$temp_rpath:" in |
| 4987 | *"$absdir:"*) ;; |
| 4988 | *) temp_rpath="$temp_rpath$absdir:" ;; |
| 4989 | esac |
| 4990 | fi |
| 4991 | |
| 4992 | # Hardcode the library path. |
| 4993 | # Skip directories that are in the system default run-time |
| 4994 | # search path. |
| 4995 | case " $sys_lib_dlsearch_path " in |
| 4996 | *" $absdir "*) ;; |
| 4997 | *) |
| 4998 | case "$compile_rpath " in |
| 4999 | *" $absdir "*) ;; |
| 5000 | *) compile_rpath="$compile_rpath $absdir" |
| 5001 | esac |
| 5002 | ;; |
| 5003 | esac |
| 5004 | case " $sys_lib_dlsearch_path " in |
| 5005 | *" $libdir "*) ;; |
| 5006 | *) |
| 5007 | case "$finalize_rpath " in |
| 5008 | *" $libdir "*) ;; |
| 5009 | *) finalize_rpath="$finalize_rpath $libdir" |
| 5010 | esac |
| 5011 | ;; |
| 5012 | esac |
| 5013 | fi # $linkmode,$pass = prog,link... |
| 5014 | |
| 5015 | if test "$alldeplibs" = yes && |
| 5016 | { test "$deplibs_check_method" = pass_all || |
| 5017 | { test "$build_libtool_libs" = yes && |
| 5018 | test -n "$library_names"; }; }; then |
| 5019 | # We only need to search for static libraries |
| 5020 | continue |
| 5021 | fi |
| 5022 | fi |
| 5023 | |
| 5024 | link_static=no # Whether the deplib will be linked statically |
| 5025 | use_static_libs=$prefer_static_libs |
| 5026 | if test "$use_static_libs" = built && test "$installed" = yes; then |
| 5027 | use_static_libs=no |
| 5028 | fi |
| 5029 | if test -n "$library_names" && |
| 5030 | { test "$use_static_libs" = no || test -z "$old_library"; }; then |
| 5031 | case $host in |
| 5032 | *cygwin* | *mingw*) |
| 5033 | # No point in relinking DLLs because paths are not encoded |
| 5034 | notinst_deplibs="$notinst_deplibs $lib" |
| 5035 | need_relink=no |
| 5036 | ;; |
| 5037 | *) |
| 5038 | if test "$installed" = no; then |
| 5039 | notinst_deplibs="$notinst_deplibs $lib" |
| 5040 | need_relink=yes |
| 5041 | fi |
| 5042 | ;; |
| 5043 | esac |
| 5044 | # This is a shared library |
| 5045 | |
| 5046 | # Warn about portability, can't link against -module's on some |
| 5047 | # systems (darwin). Don't bleat about dlopened modules though! |
| 5048 | dlopenmodule="" |
| 5049 | for dlpremoduletest in $dlprefiles; do |
| 5050 | if test "X$dlpremoduletest" = "X$lib"; then |
| 5051 | dlopenmodule="$dlpremoduletest" |
| 5052 | break |
| 5053 | fi |
| 5054 | done |
| 5055 | if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then |
| 5056 | $ECHO |
| 5057 | if test "$linkmode" = prog; then |
| 5058 | $ECHO "*** Warning: Linking the executable $output against the loadable module" |
| 5059 | else |
| 5060 | $ECHO "*** Warning: Linking the shared library $output against the loadable module" |
| 5061 | fi |
| 5062 | $ECHO "*** $linklib is not portable!" |
| 5063 | fi |
| 5064 | if test "$linkmode" = lib && |
| 5065 | test "$hardcode_into_libs" = yes; then |
| 5066 | # Hardcode the library path. |
| 5067 | # Skip directories that are in the system default run-time |
| 5068 | # search path. |
| 5069 | case " $sys_lib_dlsearch_path " in |
| 5070 | *" $absdir "*) ;; |
| 5071 | *) |
| 5072 | case "$compile_rpath " in |
| 5073 | *" $absdir "*) ;; |
| 5074 | *) compile_rpath="$compile_rpath $absdir" |
| 5075 | esac |
| 5076 | ;; |
| 5077 | esac |
| 5078 | case " $sys_lib_dlsearch_path " in |
| 5079 | *" $libdir "*) ;; |
| 5080 | *) |
| 5081 | case "$finalize_rpath " in |
| 5082 | *" $libdir "*) ;; |
| 5083 | *) finalize_rpath="$finalize_rpath $libdir" |
| 5084 | esac |
| 5085 | ;; |
| 5086 | esac |
| 5087 | fi |
| 5088 | |
| 5089 | if test -n "$old_archive_from_expsyms_cmds"; then |
| 5090 | # figure out the soname |
| 5091 | set dummy $library_names |
| 5092 | shift |
| 5093 | realname="$1" |
| 5094 | shift |
| 5095 | libname=`eval "\\$ECHO \"$libname_spec\""` |
| 5096 | # use dlname if we got it. it's perfectly good, no? |
| 5097 | if test -n "$dlname"; then |
| 5098 | soname="$dlname" |
| 5099 | elif test -n "$soname_spec"; then |
| 5100 | # bleh windows |
| 5101 | case $host in |
| 5102 | *cygwin* | mingw*) |
| 5103 | func_arith $current - $age |
| 5104 | major=$func_arith_result |
| 5105 | versuffix="-$major" |
| 5106 | ;; |
| 5107 | esac |
| 5108 | eval soname=\"$soname_spec\" |
| 5109 | else |
| 5110 | soname="$realname" |
| 5111 | fi |
| 5112 | |
| 5113 | # Make a new name for the extract_expsyms_cmds to use |
| 5114 | soroot="$soname" |
| 5115 | func_basename "$soroot" |
| 5116 | soname="$func_basename_result" |
| 5117 | func_stripname 'lib' '.dll' "$soname" |
| 5118 | newlib=libimp-$func_stripname_result.a |
| 5119 | |
| 5120 | # If the library has no export list, then create one now |
| 5121 | if test -f "$output_objdir/$soname-def"; then : |
| 5122 | else |
| 5123 | func_verbose "extracting exported symbol list from \`$soname'" |
| 5124 | func_execute_cmds "$extract_expsyms_cmds" 'exit $?' |
| 5125 | fi |
| 5126 | |
| 5127 | # Create $newlib |
| 5128 | if test -f "$output_objdir/$newlib"; then :; else |
| 5129 | func_verbose "generating import library for \`$soname'" |
| 5130 | func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' |
| 5131 | fi |
| 5132 | # make sure the library variables are pointing to the new library |
| 5133 | dir=$output_objdir |
| 5134 | linklib=$newlib |
| 5135 | fi # test -n "$old_archive_from_expsyms_cmds" |
| 5136 | |
| 5137 | if test "$linkmode" = prog || test "$mode" != relink; then |
| 5138 | add_shlibpath= |
| 5139 | add_dir= |
| 5140 | add= |
| 5141 | lib_linked=yes |
| 5142 | case $hardcode_action in |
| 5143 | immediate | unsupported) |
| 5144 | if test "$hardcode_direct" = no; then |
| 5145 | add="$dir/$linklib" |
| 5146 | case $host in |
| 5147 | *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; |
| 5148 | *-*-sysv4*uw2*) add_dir="-L$dir" ;; |
| 5149 | *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ |
| 5150 | *-*-unixware7*) add_dir="-L$dir" ;; |
| 5151 | *-*-darwin* ) |
| 5152 | # if the lib is a (non-dlopened) module then we can not |
| 5153 | # link against it, someone is ignoring the earlier warnings |
| 5154 | if /usr/bin/file -L $add 2> /dev/null | |
| 5155 | $GREP ": [^:]* bundle" >/dev/null ; then |
| 5156 | if test "X$dlopenmodule" != "X$lib"; then |
| 5157 | $ECHO "*** Warning: lib $linklib is a module, not a shared library" |
| 5158 | if test -z "$old_library" ; then |
| 5159 | $ECHO |
| 5160 | $ECHO "*** And there doesn't seem to be a static archive available" |
| 5161 | $ECHO "*** The link will probably fail, sorry" |
| 5162 | else |
| 5163 | add="$dir/$old_library" |
| 5164 | fi |
| 5165 | elif test -n "$old_library"; then |
| 5166 | add="$dir/$old_library" |
| 5167 | fi |
| 5168 | fi |
| 5169 | esac |
| 5170 | elif test "$hardcode_minus_L" = no; then |
| 5171 | case $host in |
| 5172 | *-*-sunos*) add_shlibpath="$dir" ;; |
| 5173 | esac |
| 5174 | add_dir="-L$dir" |
| 5175 | add="-l$name" |
| 5176 | elif test "$hardcode_shlibpath_var" = no; then |
| 5177 | add_shlibpath="$dir" |
| 5178 | add="-l$name" |
| 5179 | else |
| 5180 | lib_linked=no |
| 5181 | fi |
| 5182 | ;; |
| 5183 | relink) |
| 5184 | if test "$hardcode_direct" = yes && |
| 5185 | test "$hardcode_direct_absolute" = no; then |
| 5186 | add="$dir/$linklib" |
| 5187 | elif test "$hardcode_minus_L" = yes; then |
| 5188 | add_dir="-L$dir" |
| 5189 | # Try looking first in the location we're being installed to. |
| 5190 | if test -n "$inst_prefix_dir"; then |
| 5191 | case $libdir in |
| 5192 | [\\/]*) |
| 5193 | add_dir="$add_dir -L$inst_prefix_dir$libdir" |
| 5194 | ;; |
| 5195 | esac |
| 5196 | fi |
| 5197 | add="-l$name" |
| 5198 | elif test "$hardcode_shlibpath_var" = yes; then |
| 5199 | add_shlibpath="$dir" |
| 5200 | add="-l$name" |
| 5201 | else |
| 5202 | lib_linked=no |
| 5203 | fi |
| 5204 | ;; |
| 5205 | *) lib_linked=no ;; |
| 5206 | esac |
| 5207 | |
| 5208 | if test "$lib_linked" != yes; then |
| 5209 | func_fatal_configuration "unsupported hardcode properties" |
| 5210 | fi |
| 5211 | |
| 5212 | if test -n "$add_shlibpath"; then |
| 5213 | case :$compile_shlibpath: in |
| 5214 | *":$add_shlibpath:"*) ;; |
| 5215 | *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; |
| 5216 | esac |
| 5217 | fi |
| 5218 | if test "$linkmode" = prog; then |
| 5219 | test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" |
| 5220 | test -n "$add" && compile_deplibs="$add $compile_deplibs" |
| 5221 | else |
| 5222 | test -n "$add_dir" && deplibs="$add_dir $deplibs" |
| 5223 | test -n "$add" && deplibs="$add $deplibs" |
| 5224 | if test "$hardcode_direct" != yes && |
| 5225 | test "$hardcode_minus_L" != yes && |
| 5226 | test "$hardcode_shlibpath_var" = yes; then |
| 5227 | case :$finalize_shlibpath: in |
| 5228 | *":$libdir:"*) ;; |
| 5229 | *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; |
| 5230 | esac |
| 5231 | fi |
| 5232 | fi |
| 5233 | fi |
| 5234 | |
| 5235 | if test "$linkmode" = prog || test "$mode" = relink; then |
| 5236 | add_shlibpath= |
| 5237 | add_dir= |
| 5238 | add= |
| 5239 | # Finalize command for both is simple: just hardcode it. |
| 5240 | if test "$hardcode_direct" = yes && |
| 5241 | test "$hardcode_direct_absolute" = no; then |
| 5242 | add="$libdir/$linklib" |
| 5243 | elif test "$hardcode_minus_L" = yes; then |
| 5244 | add_dir="-L$libdir" |
| 5245 | add="-l$name" |
| 5246 | elif test "$hardcode_shlibpath_var" = yes; then |
| 5247 | case :$finalize_shlibpath: in |
| 5248 | *":$libdir:"*) ;; |
| 5249 | *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; |
| 5250 | esac |
| 5251 | add="-l$name" |
| 5252 | elif test "$hardcode_automatic" = yes; then |
| 5253 | if test -n "$inst_prefix_dir" && |
| 5254 | test -f "$inst_prefix_dir$libdir/$linklib" ; then |
| 5255 | add="$inst_prefix_dir$libdir/$linklib" |
| 5256 | else |
| 5257 | add="$libdir/$linklib" |
| 5258 | fi |
| 5259 | else |
| 5260 | # We cannot seem to hardcode it, guess we'll fake it. |
| 5261 | add_dir="-L$libdir" |
| 5262 | # Try looking first in the location we're being installed to. |
| 5263 | if test -n "$inst_prefix_dir"; then |
| 5264 | case $libdir in |
| 5265 | [\\/]*) |
| 5266 | add_dir="$add_dir -L$inst_prefix_dir$libdir" |
| 5267 | ;; |
| 5268 | esac |
| 5269 | fi |
| 5270 | add="-l$name" |
| 5271 | fi |
| 5272 | |
| 5273 | if test "$linkmode" = prog; then |
| 5274 | test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" |
| 5275 | test -n "$add" && finalize_deplibs="$add $finalize_deplibs" |
| 5276 | else |
| 5277 | test -n "$add_dir" && deplibs="$add_dir $deplibs" |
| 5278 | test -n "$add" && deplibs="$add $deplibs" |
| 5279 | fi |
| 5280 | fi |
| 5281 | elif test "$linkmode" = prog; then |
| 5282 | # Here we assume that one of hardcode_direct or hardcode_minus_L |
| 5283 | # is not unsupported. This is valid on all known static and |
| 5284 | # shared platforms. |
| 5285 | if test "$hardcode_direct" != unsupported; then |
| 5286 | test -n "$old_library" && linklib="$old_library" |
| 5287 | compile_deplibs="$dir/$linklib $compile_deplibs" |
| 5288 | finalize_deplibs="$dir/$linklib $finalize_deplibs" |
| 5289 | else |
| 5290 | compile_deplibs="-l$name -L$dir $compile_deplibs" |
| 5291 | finalize_deplibs="-l$name -L$dir $finalize_deplibs" |
| 5292 | fi |
| 5293 | elif test "$build_libtool_libs" = yes; then |
| 5294 | # Not a shared library |
| 5295 | if test "$deplibs_check_method" != pass_all; then |
| 5296 | # We're trying link a shared library against a static one |
| 5297 | # but the system doesn't support it. |
| 5298 | |
| 5299 | # Just print a warning and add the library to dependency_libs so |
| 5300 | # that the program can be linked against the static library. |
| 5301 | $ECHO |
| 5302 | $ECHO "*** Warning: This system can not link to static lib archive $lib." |
| 5303 | $ECHO "*** I have the capability to make that library automatically link in when" |
| 5304 | $ECHO "*** you link to this library. But I can only do this if you have a" |
| 5305 | $ECHO "*** shared version of the library, which you do not appear to have." |
| 5306 | if test "$module" = yes; then |
| 5307 | $ECHO "*** But as you try to build a module library, libtool will still create " |
| 5308 | $ECHO "*** a static module, that should work as long as the dlopening application" |
| 5309 | $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." |
| 5310 | if test -z "$global_symbol_pipe"; then |
| 5311 | $ECHO |
| 5312 | $ECHO "*** However, this would only work if libtool was able to extract symbol" |
| 5313 | $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" |
| 5314 | $ECHO "*** not find such a program. So, this module is probably useless." |
| 5315 | $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." |
| 5316 | fi |
| 5317 | if test "$build_old_libs" = no; then |
| 5318 | build_libtool_libs=module |
| 5319 | build_old_libs=yes |
| 5320 | else |
| 5321 | build_libtool_libs=no |
| 5322 | fi |
| 5323 | fi |
| 5324 | else |
| 5325 | deplibs="$dir/$old_library $deplibs" |
| 5326 | link_static=yes |
| 5327 | fi |
| 5328 | fi # link shared/static library? |
| 5329 | |
| 5330 | if test "$linkmode" = lib; then |
| 5331 | if test -n "$dependency_libs" && |
| 5332 | { test "$hardcode_into_libs" != yes || |
| 5333 | test "$build_old_libs" = yes || |
| 5334 | test "$link_static" = yes; }; then |
| 5335 | # Extract -R from dependency_libs |
| 5336 | temp_deplibs= |
| 5337 | for libdir in $dependency_libs; do |
| 5338 | case $libdir in |
| 5339 | -R*) func_stripname '-R' '' "$libdir" |
| 5340 | temp_xrpath=$func_stripname_result |
| 5341 | case " $xrpath " in |
| 5342 | *" $temp_xrpath "*) ;; |
| 5343 | *) xrpath="$xrpath $temp_xrpath";; |
| 5344 | esac;; |
| 5345 | *) temp_deplibs="$temp_deplibs $libdir";; |
| 5346 | esac |
| 5347 | done |
| 5348 | dependency_libs="$temp_deplibs" |
| 5349 | fi |
| 5350 | |
| 5351 | newlib_search_path="$newlib_search_path $absdir" |
| 5352 | # Link against this library |
| 5353 | test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" |
| 5354 | # ... and its dependency_libs |
| 5355 | tmp_libs= |
| 5356 | for deplib in $dependency_libs; do |
| 5357 | newdependency_libs="$deplib $newdependency_libs" |
| 5358 | if $opt_duplicate_deps ; then |
| 5359 | case "$tmp_libs " in |
| 5360 | *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; |
| 5361 | esac |
| 5362 | fi |
| 5363 | tmp_libs="$tmp_libs $deplib" |
| 5364 | done |
| 5365 | |
| 5366 | if test "$link_all_deplibs" != no; then |
| 5367 | # Add the search paths of all dependency libraries |
| 5368 | for deplib in $dependency_libs; do |
| 5369 | case $deplib in |
| 5370 | -L*) path="$deplib" ;; |
| 5371 | *.la) |
| 5372 | func_dirname "$deplib" "" "." |
| 5373 | dir="$func_dirname_result" |
| 5374 | # We need an absolute path. |
| 5375 | case $dir in |
| 5376 | [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; |
| 5377 | *) |
| 5378 | absdir=`cd "$dir" && pwd` |
| 5379 | if test -z "$absdir"; then |
| 5380 | func_warning "cannot determine absolute directory name of \`$dir'" |
| 5381 | absdir="$dir" |
| 5382 | fi |
| 5383 | ;; |
| 5384 | esac |
| 5385 | if $GREP "^installed=no" $deplib > /dev/null; then |
| 5386 | case $host in |
| 5387 | *-*-darwin*) |
| 5388 | depdepl= |
| 5389 | eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` |
| 5390 | if test -n "$deplibrary_names" ; then |
| 5391 | for tmp in $deplibrary_names ; do |
| 5392 | depdepl=$tmp |
| 5393 | done |
| 5394 | if test -f "$absdir/$objdir/$depdepl" ; then |
| 5395 | depdepl="$absdir/$objdir/$depdepl" |
| 5396 | darwin_install_name=`otool -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'` |
| 5397 | darwin_install_name=`$ECHO $darwin_install_name` |
| 5398 | if test -z "$darwin_install_name"; then |
| 5399 | darwin_install_name=`otool64 -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'` |
| 5400 | darwin_install_name=`$ECHO $darwin_install_name` |
| 5401 | fi |
| 5402 | compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" |
| 5403 | linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" |
| 5404 | path= |
| 5405 | fi |
| 5406 | fi |
| 5407 | ;; |
| 5408 | *) |
| 5409 | path="-L$absdir/$objdir" |
| 5410 | ;; |
| 5411 | esac |
| 5412 | else |
| 5413 | eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` |
| 5414 | test -z "$libdir" && \ |
| 5415 | func_fatal_error "\`$deplib' is not a valid libtool archive" |
| 5416 | test "$absdir" != "$libdir" && \ |
| 5417 | func_warning "\`$deplib' seems to be moved" |
| 5418 | |
| 5419 | path="-L$absdir" |
| 5420 | fi |
| 5421 | ;; |
| 5422 | esac |
| 5423 | case " $deplibs " in |
| 5424 | *" $path "*) ;; |
| 5425 | *) deplibs="$path $deplibs" ;; |
| 5426 | esac |
| 5427 | done |
| 5428 | fi # link_all_deplibs != no |
| 5429 | fi # linkmode = lib |
| 5430 | done # for deplib in $libs |
| 5431 | if test "$pass" = link; then |
| 5432 | if test "$linkmode" = "prog"; then |
| 5433 | compile_deplibs="$new_inherited_linker_flags $compile_deplibs" |
| 5434 | finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" |
| 5435 | else |
| 5436 | compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` |
| 5437 | fi |
| 5438 | fi |
| 5439 | dependency_libs="$newdependency_libs" |
| 5440 | if test "$pass" = dlpreopen; then |
| 5441 | # Link the dlpreopened libraries before other libraries |
| 5442 | for deplib in $save_deplibs; do |
| 5443 | deplibs="$deplib $deplibs" |
| 5444 | done |
| 5445 | fi |
| 5446 | if test "$pass" != dlopen; then |
| 5447 | if test "$pass" != conv; then |
| 5448 | # Make sure lib_search_path contains only unique directories. |
| 5449 | lib_search_path= |
| 5450 | for dir in $newlib_search_path; do |
| 5451 | case "$lib_search_path " in |
| 5452 | *" $dir "*) ;; |
| 5453 | *) lib_search_path="$lib_search_path $dir" ;; |
| 5454 | esac |
| 5455 | done |
| 5456 | newlib_search_path= |
| 5457 | fi |
| 5458 | |
| 5459 | if test "$linkmode,$pass" != "prog,link"; then |
| 5460 | vars="deplibs" |
| 5461 | else |
| 5462 | vars="compile_deplibs finalize_deplibs" |
| 5463 | fi |
| 5464 | for var in $vars dependency_libs; do |
| 5465 | # Add libraries to $var in reverse order |
| 5466 | eval tmp_libs=\"\$$var\" |
| 5467 | new_libs= |
| 5468 | for deplib in $tmp_libs; do |
| 5469 | # FIXME: Pedantically, this is the right thing to do, so |
| 5470 | # that some nasty dependency loop isn't accidentally |
| 5471 | # broken: |
| 5472 | #new_libs="$deplib $new_libs" |
| 5473 | # Pragmatically, this seems to cause very few problems in |
| 5474 | # practice: |
| 5475 | case $deplib in |
| 5476 | -L*) new_libs="$deplib $new_libs" ;; |
| 5477 | -R*) ;; |
| 5478 | *) |
| 5479 | # And here is the reason: when a library appears more |
| 5480 | # than once as an explicit dependence of a library, or |
| 5481 | # is implicitly linked in more than once by the |
| 5482 | # compiler, it is considered special, and multiple |
| 5483 | # occurrences thereof are not removed. Compare this |
| 5484 | # with having the same library being listed as a |
| 5485 | # dependency of multiple other libraries: in this case, |
| 5486 | # we know (pedantically, we assume) the library does not |
| 5487 | # need to be listed more than once, so we keep only the |
| 5488 | # last copy. This is not always right, but it is rare |
| 5489 | # enough that we require users that really mean to play |
| 5490 | # such unportable linking tricks to link the library |
| 5491 | # using -Wl,-lname, so that libtool does not consider it |
| 5492 | # for duplicate removal. |
| 5493 | case " $specialdeplibs " in |
| 5494 | *" $deplib "*) new_libs="$deplib $new_libs" ;; |
| 5495 | *) |
| 5496 | case " $new_libs " in |
| 5497 | *" $deplib "*) ;; |
| 5498 | *) new_libs="$deplib $new_libs" ;; |
| 5499 | esac |
| 5500 | ;; |
| 5501 | esac |
| 5502 | ;; |
| 5503 | esac |
| 5504 | done |
| 5505 | tmp_libs= |
| 5506 | for deplib in $new_libs; do |
| 5507 | case $deplib in |
| 5508 | -L*) |
| 5509 | case " $tmp_libs " in |
| 5510 | *" $deplib "*) ;; |
| 5511 | *) tmp_libs="$tmp_libs $deplib" ;; |
| 5512 | esac |
| 5513 | ;; |
| 5514 | *) tmp_libs="$tmp_libs $deplib" ;; |
| 5515 | esac |
| 5516 | done |
| 5517 | eval $var=\"$tmp_libs\" |
| 5518 | done # for var |
| 5519 | fi |
| 5520 | # Last step: remove runtime libs from dependency_libs |
| 5521 | # (they stay in deplibs) |
| 5522 | tmp_libs= |
| 5523 | for i in $dependency_libs ; do |
| 5524 | case " $predeps $postdeps $compiler_lib_search_path " in |
| 5525 | *" $i "*) |
| 5526 | i="" |
| 5527 | ;; |
| 5528 | esac |
| 5529 | if test -n "$i" ; then |
| 5530 | tmp_libs="$tmp_libs $i" |
| 5531 | fi |
| 5532 | done |
| 5533 | dependency_libs=$tmp_libs |
| 5534 | done # for pass |
| 5535 | if test "$linkmode" = prog; then |
| 5536 | dlfiles="$newdlfiles" |
| 5537 | fi |
| 5538 | if test "$linkmode" = prog || test "$linkmode" = lib; then |
| 5539 | dlprefiles="$newdlprefiles" |
| 5540 | fi |
| 5541 | |
| 5542 | case $linkmode in |
| 5543 | oldlib) |
| 5544 | if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then |
| 5545 | func_warning "\`-dlopen' is ignored for archives" |
| 5546 | fi |
| 5547 | |
| 5548 | case " $deplibs" in |
| 5549 | *\ -l* | *\ -L*) |
| 5550 | func_warning "\`-l' and \`-L' are ignored for archives" ;; |
| 5551 | esac |
| 5552 | |
| 5553 | test -n "$rpath" && \ |
| 5554 | func_warning "\`-rpath' is ignored for archives" |
| 5555 | |
| 5556 | test -n "$xrpath" && \ |
| 5557 | func_warning "\`-R' is ignored for archives" |
| 5558 | |
| 5559 | test -n "$vinfo" && \ |
| 5560 | func_warning "\`-version-info/-version-number' is ignored for archives" |
| 5561 | |
| 5562 | test -n "$release" && \ |
| 5563 | func_warning "\`-release' is ignored for archives" |
| 5564 | |
| 5565 | test -n "$export_symbols$export_symbols_regex" && \ |
| 5566 | func_warning "\`-export-symbols' is ignored for archives" |
| 5567 | |
| 5568 | # Now set the variables for building old libraries. |
| 5569 | build_libtool_libs=no |
| 5570 | oldlibs="$output" |
| 5571 | objs="$objs$old_deplibs" |
| 5572 | ;; |
| 5573 | |
| 5574 | lib) |
| 5575 | # Make sure we only generate libraries of the form `libNAME.la'. |
| 5576 | case $outputname in |
| 5577 | lib*) |
| 5578 | func_stripname 'lib' '.la' "$outputname" |
| 5579 | name=$func_stripname_result |
| 5580 | eval shared_ext=\"$shrext_cmds\" |
| 5581 | eval libname=\"$libname_spec\" |
| 5582 | ;; |
| 5583 | *) |
| 5584 | test "$module" = no && \ |
| 5585 | func_fatal_help "libtool library \`$output' must begin with \`lib'" |
| 5586 | |
| 5587 | if test "$need_lib_prefix" != no; then |
| 5588 | # Add the "lib" prefix for modules if required |
| 5589 | func_stripname '' '.la' "$outputname" |
| 5590 | name=$func_stripname_result |
| 5591 | eval shared_ext=\"$shrext_cmds\" |
| 5592 | eval libname=\"$libname_spec\" |
| 5593 | else |
| 5594 | func_stripname '' '.la' "$outputname" |
| 5595 | libname=$func_stripname_result |
| 5596 | fi |
| 5597 | ;; |
| 5598 | esac |
| 5599 | |
| 5600 | if test -n "$objs"; then |
| 5601 | if test "$deplibs_check_method" != pass_all; then |
| 5602 | func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" |
| 5603 | else |
| 5604 | $ECHO |
| 5605 | $ECHO "*** Warning: Linking the shared library $output against the non-libtool" |
| 5606 | $ECHO "*** objects $objs is not portable!" |
| 5607 | libobjs="$libobjs $objs" |
| 5608 | fi |
| 5609 | fi |
| 5610 | |
| 5611 | test "$dlself" != no && \ |
| 5612 | func_warning "\`-dlopen self' is ignored for libtool libraries" |
| 5613 | |
| 5614 | set dummy $rpath |
| 5615 | shift |
| 5616 | test "$#" -gt 1 && \ |
| 5617 | func_warning "ignoring multiple \`-rpath's for a libtool library" |
| 5618 | |
| 5619 | install_libdir="$1" |
| 5620 | |
| 5621 | oldlibs= |
| 5622 | if test -z "$rpath"; then |
| 5623 | if test "$build_libtool_libs" = yes; then |
| 5624 | # Building a libtool convenience library. |
| 5625 | # Some compilers have problems with a `.al' extension so |
| 5626 | # convenience libraries should have the same extension an |
| 5627 | # archive normally would. |
| 5628 | oldlibs="$output_objdir/$libname.$libext $oldlibs" |
| 5629 | build_libtool_libs=convenience |
| 5630 | build_old_libs=yes |
| 5631 | fi |
| 5632 | |
| 5633 | test -n "$vinfo" && \ |
| 5634 | func_warning "\`-version-info/-version-number' is ignored for convenience libraries" |
| 5635 | |
| 5636 | test -n "$release" && \ |
| 5637 | func_warning "\`-release' is ignored for convenience libraries" |
| 5638 | else |
| 5639 | |
| 5640 | # Parse the version information argument. |
| 5641 | save_ifs="$IFS"; IFS=':' |
| 5642 | set dummy $vinfo 0 0 0 |
| 5643 | shift |
| 5644 | IFS="$save_ifs" |
| 5645 | |
| 5646 | test -n "$7" && \ |
| 5647 | func_fatal_help "too many parameters to \`-version-info'" |
| 5648 | |
| 5649 | # convert absolute version numbers to libtool ages |
| 5650 | # this retains compatibility with .la files and attempts |
| 5651 | # to make the code below a bit more comprehensible |
| 5652 | |
| 5653 | case $vinfo_number in |
| 5654 | yes) |
| 5655 | number_major="$1" |
| 5656 | number_minor="$2" |
| 5657 | number_revision="$3" |
| 5658 | # |
| 5659 | # There are really only two kinds -- those that |
| 5660 | # use the current revision as the major version |
| 5661 | # and those that subtract age and use age as |
| 5662 | # a minor version. But, then there is irix |
| 5663 | # which has an extra 1 added just for fun |
| 5664 | # |
| 5665 | case $version_type in |
| 5666 | darwin|linux|osf|windows|none) |
| 5667 | func_arith $number_major + $number_minor |
| 5668 | current=$func_arith_result |
| 5669 | age="$number_minor" |
| 5670 | revision="$number_revision" |
| 5671 | ;; |
| 5672 | freebsd-aout|freebsd-elf|sunos) |
| 5673 | current="$number_major" |
| 5674 | revision="$number_minor" |
| 5675 | age="0" |
| 5676 | ;; |
| 5677 | irix|nonstopux) |
| 5678 | func_arith $number_major + $number_minor |
| 5679 | current=$func_arith_result |
| 5680 | age="$number_minor" |
| 5681 | revision="$number_minor" |
| 5682 | lt_irix_increment=no |
| 5683 | ;; |
| 5684 | esac |
| 5685 | ;; |
| 5686 | no) |
| 5687 | current="$1" |
| 5688 | revision="$2" |
| 5689 | age="$3" |
| 5690 | ;; |
| 5691 | esac |
| 5692 | |
| 5693 | # Check that each of the things are valid numbers. |
| 5694 | case $current in |
| 5695 | 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; |
| 5696 | *) |
| 5697 | func_error "CURRENT \`$current' must be a nonnegative integer" |
| 5698 | func_fatal_error "\`$vinfo' is not valid version information" |
| 5699 | ;; |
| 5700 | esac |
| 5701 | |
| 5702 | case $revision in |
| 5703 | 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; |
| 5704 | *) |
| 5705 | func_error "REVISION \`$revision' must be a nonnegative integer" |
| 5706 | func_fatal_error "\`$vinfo' is not valid version information" |
| 5707 | ;; |
| 5708 | esac |
| 5709 | |
| 5710 | case $age in |
| 5711 | 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; |
| 5712 | *) |
| 5713 | func_error "AGE \`$age' must be a nonnegative integer" |
| 5714 | func_fatal_error "\`$vinfo' is not valid version information" |
| 5715 | ;; |
| 5716 | esac |
| 5717 | |
| 5718 | if test "$age" -gt "$current"; then |
| 5719 | func_error "AGE \`$age' is greater than the current interface number \`$current'" |
| 5720 | func_fatal_error "\`$vinfo' is not valid version information" |
| 5721 | fi |
| 5722 | |
| 5723 | # Calculate the version variables. |
| 5724 | major= |
| 5725 | versuffix= |
| 5726 | verstring= |
| 5727 | case $version_type in |
| 5728 | none) ;; |
| 5729 | |
| 5730 | darwin) |
| 5731 | # Like Linux, but with the current version available in |
| 5732 | # verstring for coding it into the library header |
| 5733 | func_arith $current - $age |
| 5734 | major=.$func_arith_result |
| 5735 | versuffix="$major.$age.$revision" |
| 5736 | # Darwin ld doesn't like 0 for these options... |
| 5737 | func_arith $current + 1 |
| 5738 | minor_current=$func_arith_result |
| 5739 | xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" |
| 5740 | verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" |
| 5741 | ;; |
| 5742 | |
| 5743 | freebsd-aout) |
| 5744 | major=".$current" |
| 5745 | versuffix=".$current.$revision"; |
| 5746 | ;; |
| 5747 | |
| 5748 | freebsd-elf) |
| 5749 | major=".$current" |
| 5750 | versuffix=".$current" |
| 5751 | ;; |
| 5752 | |
| 5753 | irix | nonstopux) |
| 5754 | if test "X$lt_irix_increment" = "Xno"; then |
| 5755 | func_arith $current - $age |
| 5756 | else |
| 5757 | func_arith $current - $age + 1 |
| 5758 | fi |
| 5759 | major=$func_arith_result |
| 5760 | |
| 5761 | case $version_type in |
| 5762 | nonstopux) verstring_prefix=nonstopux ;; |
| 5763 | *) verstring_prefix=sgi ;; |
| 5764 | esac |
| 5765 | verstring="$verstring_prefix$major.$revision" |
| 5766 | |
| 5767 | # Add in all the interfaces that we are compatible with. |
| 5768 | loop=$revision |
| 5769 | while test "$loop" -ne 0; do |
| 5770 | func_arith $revision - $loop |
| 5771 | iface=$func_arith_result |
| 5772 | func_arith $loop - 1 |
| 5773 | loop=$func_arith_result |
| 5774 | verstring="$verstring_prefix$major.$iface:$verstring" |
| 5775 | done |
| 5776 | |
| 5777 | # Before this point, $major must not contain `.'. |
| 5778 | major=.$major |
| 5779 | versuffix="$major.$revision" |
| 5780 | ;; |
| 5781 | |
| 5782 | linux) |
| 5783 | func_arith $current - $age |
| 5784 | major=.$func_arith_result |
| 5785 | versuffix="$major.$age.$revision" |
| 5786 | ;; |
| 5787 | |
| 5788 | osf) |
| 5789 | func_arith $current - $age |
| 5790 | major=.$func_arith_result |
| 5791 | versuffix=".$current.$age.$revision" |
| 5792 | verstring="$current.$age.$revision" |
| 5793 | |
| 5794 | # Add in all the interfaces that we are compatible with. |
| 5795 | loop=$age |
| 5796 | while test "$loop" -ne 0; do |
| 5797 | func_arith $current - $loop |
| 5798 | iface=$func_arith_result |
| 5799 | func_arith $loop - 1 |
| 5800 | loop=$func_arith_result |
| 5801 | verstring="$verstring:${iface}.0" |
| 5802 | done |
| 5803 | |
| 5804 | # Make executables depend on our current version. |
| 5805 | verstring="$verstring:${current}.0" |
| 5806 | ;; |
| 5807 | |
| 5808 | qnx) |
| 5809 | major=".$current" |
| 5810 | versuffix=".$current" |
| 5811 | ;; |
| 5812 | |
| 5813 | sunos) |
| 5814 | major=".$current" |
| 5815 | versuffix=".$current.$revision" |
| 5816 | ;; |
| 5817 | |
| 5818 | windows) |
| 5819 | # Use '-' rather than '.', since we only want one |
| 5820 | # extension on DOS 8.3 filesystems. |
| 5821 | func_arith $current - $age |
| 5822 | major=$func_arith_result |
| 5823 | versuffix="-$major" |
| 5824 | ;; |
| 5825 | |
| 5826 | *) |
| 5827 | func_fatal_configuration "unknown library version type \`$version_type'" |
| 5828 | ;; |
| 5829 | esac |
| 5830 | |
| 5831 | # Clear the version info if we defaulted, and they specified a release. |
| 5832 | if test -z "$vinfo" && test -n "$release"; then |
| 5833 | major= |
| 5834 | case $version_type in |
| 5835 | darwin) |
| 5836 | # we can't check for "0.0" in archive_cmds due to quoting |
| 5837 | # problems, so we reset it completely |
| 5838 | verstring= |
| 5839 | ;; |
| 5840 | *) |
| 5841 | verstring="0.0" |
| 5842 | ;; |
| 5843 | esac |
| 5844 | if test "$need_version" = no; then |
| 5845 | versuffix= |
| 5846 | else |
| 5847 | versuffix=".0.0" |
| 5848 | fi |
| 5849 | fi |
| 5850 | |
| 5851 | # Remove version info from name if versioning should be avoided |
| 5852 | if test "$avoid_version" = yes && test "$need_version" = no; then |
| 5853 | major= |
| 5854 | versuffix= |
| 5855 | verstring="" |
| 5856 | fi |
| 5857 | |
| 5858 | # Check to see if the archive will have undefined symbols. |
| 5859 | if test "$allow_undefined" = yes; then |
| 5860 | if test "$allow_undefined_flag" = unsupported; then |
| 5861 | func_warning "undefined symbols not allowed in $host shared libraries" |
| 5862 | build_libtool_libs=no |
| 5863 | build_old_libs=yes |
| 5864 | fi |
| 5865 | else |
| 5866 | # Don't allow undefined symbols. |
| 5867 | allow_undefined_flag="$no_undefined_flag" |
| 5868 | fi |
| 5869 | |
| 5870 | fi |
| 5871 | |
| 5872 | func_generate_dlsyms "$libname" "$libname" "yes" |
| 5873 | libobjs="$libobjs $symfileobj" |
| 5874 | test "X$libobjs" = "X " && libobjs= |
| 5875 | |
| 5876 | if test "$mode" != relink; then |
| 5877 | # Remove our outputs, but don't remove object files since they |
| 5878 | # may have been created when compiling PIC objects. |
| 5879 | removelist= |
| 5880 | tempremovelist=`$ECHO "$output_objdir/*"` |
| 5881 | for p in $tempremovelist; do |
| 5882 | case $p in |
| 5883 | *.$objext) |
| 5884 | ;; |
| 5885 | $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) |
| 5886 | if test "X$precious_files_regex" != "X"; then |
| 5887 | if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 |
| 5888 | then |
| 5889 | continue |
| 5890 | fi |
| 5891 | fi |
| 5892 | removelist="$removelist $p" |
| 5893 | ;; |
| 5894 | *) ;; |
| 5895 | esac |
| 5896 | done |
| 5897 | test -n "$removelist" && \ |
| 5898 | func_show_eval "${RM}r \$removelist" |
| 5899 | fi |
| 5900 | |
| 5901 | # Now set the variables for building old libraries. |
| 5902 | if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then |
| 5903 | oldlibs="$oldlibs $output_objdir/$libname.$libext" |
| 5904 | |
| 5905 | # Transform .lo files to .o files. |
| 5906 | oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` |
| 5907 | fi |
| 5908 | |
| 5909 | # Eliminate all temporary directories. |
| 5910 | #for path in $notinst_path; do |
| 5911 | # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` |
| 5912 | # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` |
| 5913 | # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` |
| 5914 | #done |
| 5915 | |
| 5916 | if test -n "$xrpath"; then |
| 5917 | # If the user specified any rpath flags, then add them. |
| 5918 | temp_xrpath= |
| 5919 | for libdir in $xrpath; do |
| 5920 | temp_xrpath="$temp_xrpath -R$libdir" |
| 5921 | case "$finalize_rpath " in |
| 5922 | *" $libdir "*) ;; |
| 5923 | *) finalize_rpath="$finalize_rpath $libdir" ;; |
| 5924 | esac |
| 5925 | done |
| 5926 | if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then |
| 5927 | dependency_libs="$temp_xrpath $dependency_libs" |
| 5928 | fi |
| 5929 | fi |
| 5930 | |
| 5931 | # Make sure dlfiles contains only unique files that won't be dlpreopened |
| 5932 | old_dlfiles="$dlfiles" |
| 5933 | dlfiles= |
| 5934 | for lib in $old_dlfiles; do |
| 5935 | case " $dlprefiles $dlfiles " in |
| 5936 | *" $lib "*) ;; |
| 5937 | *) dlfiles="$dlfiles $lib" ;; |
| 5938 | esac |
| 5939 | done |
| 5940 | |
| 5941 | # Make sure dlprefiles contains only unique files |
| 5942 | old_dlprefiles="$dlprefiles" |
| 5943 | dlprefiles= |
| 5944 | for lib in $old_dlprefiles; do |
| 5945 | case "$dlprefiles " in |
| 5946 | *" $lib "*) ;; |
| 5947 | *) dlprefiles="$dlprefiles $lib" ;; |
| 5948 | esac |
| 5949 | done |
| 5950 | |
| 5951 | if test "$build_libtool_libs" = yes; then |
| 5952 | if test -n "$rpath"; then |
| 5953 | case $host in |
| 5954 | *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) |
| 5955 | # these systems don't actually have a c library (as such)! |
| 5956 | ;; |
| 5957 | *-*-rhapsody* | *-*-darwin1.[012]) |
| 5958 | # Rhapsody C library is in the System framework |
| 5959 | deplibs="$deplibs System.ltframework" |
| 5960 | ;; |
| 5961 | *-*-netbsd*) |
| 5962 | # Don't link with libc until the a.out ld.so is fixed. |
| 5963 | ;; |
| 5964 | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) |
| 5965 | # Do not include libc due to us having libc/libc_r. |
| 5966 | ;; |
| 5967 | *-*-sco3.2v5* | *-*-sco5v6*) |
| 5968 | # Causes problems with __ctype |
| 5969 | ;; |
| 5970 | *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) |
| 5971 | # Compiler inserts libc in the correct place for threads to work |
| 5972 | ;; |
| 5973 | *) |
| 5974 | # Add libc to deplibs on all other systems if necessary. |
| 5975 | if test "$build_libtool_need_lc" = "yes"; then |
| 5976 | deplibs="$deplibs -lc" |
| 5977 | fi |
| 5978 | ;; |
| 5979 | esac |
| 5980 | fi |
| 5981 | |
| 5982 | # Transform deplibs into only deplibs that can be linked in shared. |
| 5983 | name_save=$name |
| 5984 | libname_save=$libname |
| 5985 | release_save=$release |
| 5986 | versuffix_save=$versuffix |
| 5987 | major_save=$major |
| 5988 | # I'm not sure if I'm treating the release correctly. I think |
| 5989 | # release should show up in the -l (ie -lgmp5) so we don't want to |
| 5990 | # add it in twice. Is that correct? |
| 5991 | release="" |
| 5992 | versuffix="" |
| 5993 | major="" |
| 5994 | newdeplibs= |
| 5995 | droppeddeps=no |
| 5996 | case $deplibs_check_method in |
| 5997 | pass_all) |
| 5998 | # Don't check for shared/static. Everything works. |
| 5999 | # This might be a little naive. We might want to check |
| 6000 | # whether the library exists or not. But this is on |
| 6001 | # osf3 & osf4 and I'm not really sure... Just |
| 6002 | # implementing what was already the behavior. |
| 6003 | newdeplibs=$deplibs |
| 6004 | ;; |
| 6005 | test_compile) |
| 6006 | # This code stresses the "libraries are programs" paradigm to its |
| 6007 | # limits. Maybe even breaks it. We compile a program, linking it |
| 6008 | # against the deplibs as a proxy for the library. Then we can check |
| 6009 | # whether they linked in statically or dynamically with ldd. |
| 6010 | $opt_dry_run || $RM conftest.c |
| 6011 | cat > conftest.c <<EOF |
| 6012 | int main() { return 0; } |
| 6013 | EOF |
| 6014 | $opt_dry_run || $RM conftest |
| 6015 | if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then |
| 6016 | ldd_output=`ldd conftest` |
| 6017 | for i in $deplibs; do |
| 6018 | case $i in |
| 6019 | -l*) |
| 6020 | func_stripname -l '' "$i" |
| 6021 | name=$func_stripname_result |
| 6022 | if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then |
| 6023 | case " $predeps $postdeps " in |
| 6024 | *" $i "*) |
| 6025 | newdeplibs="$newdeplibs $i" |
| 6026 | i="" |
| 6027 | ;; |
| 6028 | esac |
| 6029 | fi |
| 6030 | if test -n "$i" ; then |
| 6031 | libname=`eval "\\$ECHO \"$libname_spec\""` |
| 6032 | deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` |
| 6033 | set dummy $deplib_matches; shift |
| 6034 | deplib_match=$1 |
| 6035 | if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then |
| 6036 | newdeplibs="$newdeplibs $i" |
| 6037 | else |
| 6038 | droppeddeps=yes |
| 6039 | $ECHO |
| 6040 | $ECHO "*** Warning: dynamic linker does not accept needed library $i." |
| 6041 | $ECHO "*** I have the capability to make that library automatically link in when" |
| 6042 | $ECHO "*** you link to this library. But I can only do this if you have a" |
| 6043 | $ECHO "*** shared version of the library, which I believe you do not have" |
| 6044 | $ECHO "*** because a test_compile did reveal that the linker did not use it for" |
| 6045 | $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." |
| 6046 | fi |
| 6047 | fi |
| 6048 | ;; |
| 6049 | *) |
| 6050 | newdeplibs="$newdeplibs $i" |
| 6051 | ;; |
| 6052 | esac |
| 6053 | done |
| 6054 | else |
| 6055 | # Error occurred in the first compile. Let's try to salvage |
| 6056 | # the situation: Compile a separate program for each library. |
| 6057 | for i in $deplibs; do |
| 6058 | case $i in |
| 6059 | -l*) |
| 6060 | func_stripname -l '' "$i" |
| 6061 | name=$func_stripname_result |
| 6062 | $opt_dry_run || $RM conftest |
| 6063 | if $LTCC $LTCFLAGS -o conftest conftest.c $i; then |
| 6064 | ldd_output=`ldd conftest` |
| 6065 | if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then |
| 6066 | case " $predeps $postdeps " in |
| 6067 | *" $i "*) |
| 6068 | newdeplibs="$newdeplibs $i" |
| 6069 | i="" |
| 6070 | ;; |
| 6071 | esac |
| 6072 | fi |
| 6073 | if test -n "$i" ; then |
| 6074 | libname=`eval "\\$ECHO \"$libname_spec\""` |
| 6075 | deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` |
| 6076 | set dummy $deplib_matches; shift |
| 6077 | deplib_match=$1 |
| 6078 | if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then |
| 6079 | newdeplibs="$newdeplibs $i" |
| 6080 | else |
| 6081 | droppeddeps=yes |
| 6082 | $ECHO |
| 6083 | $ECHO "*** Warning: dynamic linker does not accept needed library $i." |
| 6084 | $ECHO "*** I have the capability to make that library automatically link in when" |
| 6085 | $ECHO "*** you link to this library. But I can only do this if you have a" |
| 6086 | $ECHO "*** shared version of the library, which you do not appear to have" |
| 6087 | $ECHO "*** because a test_compile did reveal that the linker did not use this one" |
| 6088 | $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." |
| 6089 | fi |
| 6090 | fi |
| 6091 | else |
| 6092 | droppeddeps=yes |
| 6093 | $ECHO |
| 6094 | $ECHO "*** Warning! Library $i is needed by this library but I was not able to" |
| 6095 | $ECHO "*** make it link in! You will probably need to install it or some" |
| 6096 | $ECHO "*** library that it depends on before this library will be fully" |
| 6097 | $ECHO "*** functional. Installing it before continuing would be even better." |
| 6098 | fi |
| 6099 | ;; |
| 6100 | *) |
| 6101 | newdeplibs="$newdeplibs $i" |
| 6102 | ;; |
| 6103 | esac |
| 6104 | done |
| 6105 | fi |
| 6106 | ;; |
| 6107 | file_magic*) |
| 6108 | set dummy $deplibs_check_method; shift |
| 6109 | file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` |
| 6110 | for a_deplib in $deplibs; do |
| 6111 | case $a_deplib in |
| 6112 | -l*) |
| 6113 | func_stripname -l '' "$a_deplib" |
| 6114 | name=$func_stripname_result |
| 6115 | if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then |
| 6116 | case " $predeps $postdeps " in |
| 6117 | *" $a_deplib "*) |
| 6118 | newdeplibs="$newdeplibs $a_deplib" |
| 6119 | a_deplib="" |
| 6120 | ;; |
| 6121 | esac |
| 6122 | fi |
| 6123 | if test -n "$a_deplib" ; then |
| 6124 | libname=`eval "\\$ECHO \"$libname_spec\""` |
| 6125 | for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do |
| 6126 | potential_libs=`ls $i/$libname[.-]* 2>/dev/null` |
| 6127 | for potent_lib in $potential_libs; do |
| 6128 | # Follow soft links. |
| 6129 | if ls -lLd "$potent_lib" 2>/dev/null | |
| 6130 | $GREP " -> " >/dev/null; then |
| 6131 | continue |
| 6132 | fi |
| 6133 | # The statement above tries to avoid entering an |
| 6134 | # endless loop below, in case of cyclic links. |
| 6135 | # We might still enter an endless loop, since a link |
| 6136 | # loop can be closed while we follow links, |
| 6137 | # but so what? |
| 6138 | potlib="$potent_lib" |
| 6139 | while test -h "$potlib" 2>/dev/null; do |
| 6140 | potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` |
| 6141 | case $potliblink in |
| 6142 | [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; |
| 6143 | *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; |
| 6144 | esac |
| 6145 | done |
| 6146 | if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | |
| 6147 | $SED -e 10q | |
| 6148 | $EGREP "$file_magic_regex" > /dev/null; then |
| 6149 | newdeplibs="$newdeplibs $a_deplib" |
| 6150 | a_deplib="" |
| 6151 | break 2 |
| 6152 | fi |
| 6153 | done |
| 6154 | done |
| 6155 | fi |
| 6156 | if test -n "$a_deplib" ; then |
| 6157 | droppeddeps=yes |
| 6158 | $ECHO |
| 6159 | $ECHO "*** Warning: linker path does not have real file for library $a_deplib." |
| 6160 | $ECHO "*** I have the capability to make that library automatically link in when" |
| 6161 | $ECHO "*** you link to this library. But I can only do this if you have a" |
| 6162 | $ECHO "*** shared version of the library, which you do not appear to have" |
| 6163 | $ECHO "*** because I did check the linker path looking for a file starting" |
| 6164 | if test -z "$potlib" ; then |
| 6165 | $ECHO "*** with $libname but no candidates were found. (...for file magic test)" |
| 6166 | else |
| 6167 | $ECHO "*** with $libname and none of the candidates passed a file format test" |
| 6168 | $ECHO "*** using a file magic. Last file checked: $potlib" |
| 6169 | fi |
| 6170 | fi |
| 6171 | ;; |
| 6172 | *) |
| 6173 | # Add a -L argument. |
| 6174 | newdeplibs="$newdeplibs $a_deplib" |
| 6175 | ;; |
| 6176 | esac |
| 6177 | done # Gone through all deplibs. |
| 6178 | ;; |
| 6179 | match_pattern*) |
| 6180 | set dummy $deplibs_check_method; shift |
| 6181 | match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` |
| 6182 | for a_deplib in $deplibs; do |
| 6183 | case $a_deplib in |
| 6184 | -l*) |
| 6185 | func_stripname -l '' "$a_deplib" |
| 6186 | name=$func_stripname_result |
| 6187 | if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then |
| 6188 | case " $predeps $postdeps " in |
| 6189 | *" $a_deplib "*) |
| 6190 | newdeplibs="$newdeplibs $a_deplib" |
| 6191 | a_deplib="" |
| 6192 | ;; |
| 6193 | esac |
| 6194 | fi |
| 6195 | if test -n "$a_deplib" ; then |
| 6196 | libname=`eval "\\$ECHO \"$libname_spec\""` |
| 6197 | for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do |
| 6198 | potential_libs=`ls $i/$libname[.-]* 2>/dev/null` |
| 6199 | for potent_lib in $potential_libs; do |
| 6200 | potlib="$potent_lib" # see symlink-check above in file_magic test |
| 6201 | if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ |
| 6202 | $EGREP "$match_pattern_regex" > /dev/null; then |
| 6203 | newdeplibs="$newdeplibs $a_deplib" |
| 6204 | a_deplib="" |
| 6205 | break 2 |
| 6206 | fi |
| 6207 | done |
| 6208 | done |
| 6209 | fi |
| 6210 | if test -n "$a_deplib" ; then |
| 6211 | droppeddeps=yes |
| 6212 | $ECHO |
| 6213 | $ECHO "*** Warning: linker path does not have real file for library $a_deplib." |
| 6214 | $ECHO "*** I have the capability to make that library automatically link in when" |
| 6215 | $ECHO "*** you link to this library. But I can only do this if you have a" |
| 6216 | $ECHO "*** shared version of the library, which you do not appear to have" |
| 6217 | $ECHO "*** because I did check the linker path looking for a file starting" |
| 6218 | if test -z "$potlib" ; then |
| 6219 | $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" |
| 6220 | else |
| 6221 | $ECHO "*** with $libname and none of the candidates passed a file format test" |
| 6222 | $ECHO "*** using a regex pattern. Last file checked: $potlib" |
| 6223 | fi |
| 6224 | fi |
| 6225 | ;; |
| 6226 | *) |
| 6227 | # Add a -L argument. |
| 6228 | newdeplibs="$newdeplibs $a_deplib" |
| 6229 | ;; |
| 6230 | esac |
| 6231 | done # Gone through all deplibs. |
| 6232 | ;; |
| 6233 | none | unknown | *) |
| 6234 | newdeplibs="" |
| 6235 | tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ |
| 6236 | -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` |
| 6237 | if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then |
| 6238 | for i in $predeps $postdeps ; do |
| 6239 | # can't use Xsed below, because $i might contain '/' |
| 6240 | tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` |
| 6241 | done |
| 6242 | fi |
| 6243 | if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | |
| 6244 | $GREP . >/dev/null; then |
| 6245 | $ECHO |
| 6246 | if test "X$deplibs_check_method" = "Xnone"; then |
| 6247 | $ECHO "*** Warning: inter-library dependencies are not supported in this platform." |
| 6248 | else |
| 6249 | $ECHO "*** Warning: inter-library dependencies are not known to be supported." |
| 6250 | fi |
| 6251 | $ECHO "*** All declared inter-library dependencies are being dropped." |
| 6252 | droppeddeps=yes |
| 6253 | fi |
| 6254 | ;; |
| 6255 | esac |
| 6256 | versuffix=$versuffix_save |
| 6257 | major=$major_save |
| 6258 | release=$release_save |
| 6259 | libname=$libname_save |
| 6260 | name=$name_save |
| 6261 | |
| 6262 | case $host in |
| 6263 | *-*-rhapsody* | *-*-darwin1.[012]) |
| 6264 | # On Rhapsody replace the C library with the System framework |
| 6265 | newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` |
| 6266 | ;; |
| 6267 | esac |
| 6268 | |
| 6269 | if test "$droppeddeps" = yes; then |
| 6270 | if test "$module" = yes; then |
| 6271 | $ECHO |
| 6272 | $ECHO "*** Warning: libtool could not satisfy all declared inter-library" |
| 6273 | $ECHO "*** dependencies of module $libname. Therefore, libtool will create" |
| 6274 | $ECHO "*** a static module, that should work as long as the dlopening" |
| 6275 | $ECHO "*** application is linked with the -dlopen flag." |
| 6276 | if test -z "$global_symbol_pipe"; then |
| 6277 | $ECHO |
| 6278 | $ECHO "*** However, this would only work if libtool was able to extract symbol" |
| 6279 | $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" |
| 6280 | $ECHO "*** not find such a program. So, this module is probably useless." |
| 6281 | $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." |
| 6282 | fi |
| 6283 | if test "$build_old_libs" = no; then |
| 6284 | oldlibs="$output_objdir/$libname.$libext" |
| 6285 | build_libtool_libs=module |
| 6286 | build_old_libs=yes |
| 6287 | else |
| 6288 | build_libtool_libs=no |
| 6289 | fi |
| 6290 | else |
| 6291 | $ECHO "*** The inter-library dependencies that have been dropped here will be" |
| 6292 | $ECHO "*** automatically added whenever a program is linked with this library" |
| 6293 | $ECHO "*** or is declared to -dlopen it." |
| 6294 | |
| 6295 | if test "$allow_undefined" = no; then |
| 6296 | $ECHO |
| 6297 | $ECHO "*** Since this library must not contain undefined symbols," |
| 6298 | $ECHO "*** because either the platform does not support them or" |
| 6299 | $ECHO "*** it was explicitly requested with -no-undefined," |
| 6300 | $ECHO "*** libtool will only create a static version of it." |
| 6301 | if test "$build_old_libs" = no; then |
| 6302 | oldlibs="$output_objdir/$libname.$libext" |
| 6303 | build_libtool_libs=module |
| 6304 | build_old_libs=yes |
| 6305 | else |
| 6306 | build_libtool_libs=no |
| 6307 | fi |
| 6308 | fi |
| 6309 | fi |
| 6310 | fi |
| 6311 | # Done checking deplibs! |
| 6312 | deplibs=$newdeplibs |
| 6313 | fi |
| 6314 | # Time to change all our "foo.ltframework" stuff back to "-framework foo" |
| 6315 | case $host in |
| 6316 | *-*-darwin*) |
| 6317 | newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` |
| 6318 | new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` |
| 6319 | deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` |
| 6320 | ;; |
| 6321 | esac |
| 6322 | |
| 6323 | # move library search paths that coincide with paths to not yet |
| 6324 | # installed libraries to the beginning of the library search list |
| 6325 | new_libs= |
| 6326 | for path in $notinst_path; do |
| 6327 | case " $new_libs " in |
| 6328 | *" -L$path/$objdir "*) ;; |
| 6329 | *) |
| 6330 | case " $deplibs " in |
| 6331 | *" -L$path/$objdir "*) |
| 6332 | new_libs="$new_libs -L$path/$objdir" ;; |
| 6333 | esac |
| 6334 | ;; |
| 6335 | esac |
| 6336 | done |
| 6337 | for deplib in $deplibs; do |
| 6338 | case $deplib in |
| 6339 | -L*) |
| 6340 | case " $new_libs " in |
| 6341 | *" $deplib "*) ;; |
| 6342 | *) new_libs="$new_libs $deplib" ;; |
| 6343 | esac |
| 6344 | ;; |
| 6345 | *) new_libs="$new_libs $deplib" ;; |
| 6346 | esac |
| 6347 | done |
| 6348 | deplibs="$new_libs" |
| 6349 | |
| 6350 | # All the library-specific variables (install_libdir is set above). |
| 6351 | library_names= |
| 6352 | old_library= |
| 6353 | dlname= |
| 6354 | |
| 6355 | # Test again, we may have decided not to build it any more |
| 6356 | if test "$build_libtool_libs" = yes; then |
| 6357 | if test "$hardcode_into_libs" = yes; then |
| 6358 | # Hardcode the library paths |
| 6359 | hardcode_libdirs= |
| 6360 | dep_rpath= |
| 6361 | rpath="$finalize_rpath" |
| 6362 | test "$mode" != relink && rpath="$compile_rpath$rpath" |
| 6363 | for libdir in $rpath; do |
| 6364 | if test -n "$hardcode_libdir_flag_spec"; then |
| 6365 | if test -n "$hardcode_libdir_separator"; then |
| 6366 | if test -z "$hardcode_libdirs"; then |
| 6367 | hardcode_libdirs="$libdir" |
| 6368 | else |
| 6369 | # Just accumulate the unique libdirs. |
| 6370 | case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in |
| 6371 | *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) |
| 6372 | ;; |
| 6373 | *) |
| 6374 | hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" |
| 6375 | ;; |
| 6376 | esac |
| 6377 | fi |
| 6378 | else |
| 6379 | eval flag=\"$hardcode_libdir_flag_spec\" |
| 6380 | dep_rpath="$dep_rpath $flag" |
| 6381 | fi |
| 6382 | elif test -n "$runpath_var"; then |
| 6383 | case "$perm_rpath " in |
| 6384 | *" $libdir "*) ;; |
| 6385 | *) perm_rpath="$perm_rpath $libdir" ;; |
| 6386 | esac |
| 6387 | fi |
| 6388 | done |
| 6389 | # Substitute the hardcoded libdirs into the rpath. |
| 6390 | if test -n "$hardcode_libdir_separator" && |
| 6391 | test -n "$hardcode_libdirs"; then |
| 6392 | libdir="$hardcode_libdirs" |
| 6393 | if test -n "$hardcode_libdir_flag_spec_ld"; then |
| 6394 | eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" |
| 6395 | else |
| 6396 | eval dep_rpath=\"$hardcode_libdir_flag_spec\" |
| 6397 | fi |
| 6398 | fi |
| 6399 | if test -n "$runpath_var" && test -n "$perm_rpath"; then |
| 6400 | # We should set the runpath_var. |
| 6401 | rpath= |
| 6402 | for dir in $perm_rpath; do |
| 6403 | rpath="$rpath$dir:" |
| 6404 | done |
| 6405 | eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" |
| 6406 | fi |
| 6407 | test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" |
| 6408 | fi |
| 6409 | |
| 6410 | shlibpath="$finalize_shlibpath" |
| 6411 | test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" |
| 6412 | if test -n "$shlibpath"; then |
| 6413 | eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" |
| 6414 | fi |
| 6415 | |
| 6416 | # Get the real and link names of the library. |
| 6417 | eval shared_ext=\"$shrext_cmds\" |
| 6418 | eval library_names=\"$library_names_spec\" |
| 6419 | set dummy $library_names |
| 6420 | shift |
| 6421 | realname="$1" |
| 6422 | shift |
| 6423 | |
| 6424 | if test -n "$soname_spec"; then |
| 6425 | eval soname=\"$soname_spec\" |
| 6426 | else |
| 6427 | soname="$realname" |
| 6428 | fi |
| 6429 | if test -z "$dlname"; then |
| 6430 | dlname=$soname |
| 6431 | fi |
| 6432 | |
| 6433 | lib="$output_objdir/$realname" |
| 6434 | linknames= |
| 6435 | for link |
| 6436 | do |
| 6437 | linknames="$linknames $link" |
| 6438 | done |
| 6439 | |
| 6440 | # Use standard objects if they are pic |
| 6441 | test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` |
| 6442 | test "X$libobjs" = "X " && libobjs= |
| 6443 | |
| 6444 | delfiles= |
| 6445 | if test -n "$export_symbols" && test -n "$include_expsyms"; then |
| 6446 | $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" |
| 6447 | export_symbols="$output_objdir/$libname.uexp" |
| 6448 | delfiles="$delfiles $export_symbols" |
| 6449 | fi |
| 6450 | |
| 6451 | orig_export_symbols= |
| 6452 | case $host_os in |
| 6453 | cygwin* | mingw*) |
| 6454 | if test -n "$export_symbols" && test -z "$export_symbols_regex"; then |
| 6455 | # exporting using user supplied symfile |
| 6456 | if test "x`$SED 1q $export_symbols`" != xEXPORTS; then |
| 6457 | # and it's NOT already a .def file. Must figure out |
| 6458 | # which of the given symbols are data symbols and tag |
| 6459 | # them as such. So, trigger use of export_symbols_cmds. |
| 6460 | # export_symbols gets reassigned inside the "prepare |
| 6461 | # the list of exported symbols" if statement, so the |
| 6462 | # include_expsyms logic still works. |
| 6463 | orig_export_symbols="$export_symbols" |
| 6464 | export_symbols= |
| 6465 | always_export_symbols=yes |
| 6466 | fi |
| 6467 | fi |
| 6468 | ;; |
| 6469 | esac |
| 6470 | |
| 6471 | # Prepare the list of exported symbols |
| 6472 | if test -z "$export_symbols"; then |
| 6473 | if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then |
| 6474 | func_verbose "generating symbol list for \`$libname.la'" |
| 6475 | export_symbols="$output_objdir/$libname.exp" |
| 6476 | $opt_dry_run || $RM $export_symbols |
| 6477 | cmds=$export_symbols_cmds |
| 6478 | save_ifs="$IFS"; IFS='~' |
| 6479 | for cmd in $cmds; do |
| 6480 | IFS="$save_ifs" |
| 6481 | eval cmd=\"$cmd\" |
| 6482 | func_len " $cmd" |
| 6483 | len=$func_len_result |
| 6484 | if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then |
| 6485 | func_show_eval "$cmd" 'exit $?' |
| 6486 | skipped_export=false |
| 6487 | else |
| 6488 | # The command line is too long to execute in one step. |
| 6489 | func_verbose "using reloadable object file for export list..." |
| 6490 | skipped_export=: |
| 6491 | # Break out early, otherwise skipped_export may be |
| 6492 | # set to false by a later but shorter cmd. |
| 6493 | break |
| 6494 | fi |
| 6495 | done |
| 6496 | IFS="$save_ifs" |
| 6497 | if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then |
| 6498 | func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' |
| 6499 | func_show_eval '$MV "${export_symbols}T" "$export_symbols"' |
| 6500 | fi |
| 6501 | fi |
| 6502 | fi |
| 6503 | |
| 6504 | if test -n "$export_symbols" && test -n "$include_expsyms"; then |
| 6505 | tmp_export_symbols="$export_symbols" |
| 6506 | test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" |
| 6507 | $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' |
| 6508 | fi |
| 6509 | |
| 6510 | if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then |
| 6511 | # The given exports_symbols file has to be filtered, so filter it. |
| 6512 | func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" |
| 6513 | # FIXME: $output_objdir/$libname.filter potentially contains lots of |
| 6514 | # 's' commands which not all seds can handle. GNU sed should be fine |
| 6515 | # though. Also, the filter scales superlinearly with the number of |
| 6516 | # global variables. join(1) would be nice here, but unfortunately |
| 6517 | # isn't a blessed tool. |
| 6518 | $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter |
| 6519 | delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" |
| 6520 | export_symbols=$output_objdir/$libname.def |
| 6521 | $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols |
| 6522 | fi |
| 6523 | |
| 6524 | tmp_deplibs= |
| 6525 | for test_deplib in $deplibs; do |
| 6526 | case " $convenience " in |
| 6527 | *" $test_deplib "*) ;; |
| 6528 | *) |
| 6529 | tmp_deplibs="$tmp_deplibs $test_deplib" |
| 6530 | ;; |
| 6531 | esac |
| 6532 | done |
| 6533 | deplibs="$tmp_deplibs" |
| 6534 | |
| 6535 | if test -n "$convenience"; then |
| 6536 | if test -n "$whole_archive_flag_spec" && |
| 6537 | test "$compiler_needs_object" = yes && |
| 6538 | test -z "$libobjs"; then |
| 6539 | # extract the archives, so we have objects to list. |
| 6540 | # TODO: could optimize this to just extract one archive. |
| 6541 | whole_archive_flag_spec= |
| 6542 | fi |
| 6543 | if test -n "$whole_archive_flag_spec"; then |
| 6544 | save_libobjs=$libobjs |
| 6545 | eval libobjs=\"\$libobjs $whole_archive_flag_spec\" |
| 6546 | test "X$libobjs" = "X " && libobjs= |
| 6547 | else |
| 6548 | gentop="$output_objdir/${outputname}x" |
| 6549 | generated="$generated $gentop" |
| 6550 | |
| 6551 | func_extract_archives $gentop $convenience |
| 6552 | libobjs="$libobjs $func_extract_archives_result" |
| 6553 | test "X$libobjs" = "X " && libobjs= |
| 6554 | fi |
| 6555 | fi |
| 6556 | |
| 6557 | if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then |
| 6558 | eval flag=\"$thread_safe_flag_spec\" |
| 6559 | linker_flags="$linker_flags $flag" |
| 6560 | fi |
| 6561 | |
| 6562 | # Make a backup of the uninstalled library when relinking |
| 6563 | if test "$mode" = relink; then |
| 6564 | $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? |
| 6565 | fi |
| 6566 | |
| 6567 | # Do each of the archive commands. |
| 6568 | if test "$module" = yes && test -n "$module_cmds" ; then |
| 6569 | if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then |
| 6570 | eval test_cmds=\"$module_expsym_cmds\" |
| 6571 | cmds=$module_expsym_cmds |
| 6572 | else |
| 6573 | eval test_cmds=\"$module_cmds\" |
| 6574 | cmds=$module_cmds |
| 6575 | fi |
| 6576 | else |
| 6577 | if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then |
| 6578 | eval test_cmds=\"$archive_expsym_cmds\" |
| 6579 | cmds=$archive_expsym_cmds |
| 6580 | else |
| 6581 | eval test_cmds=\"$archive_cmds\" |
| 6582 | cmds=$archive_cmds |
| 6583 | fi |
| 6584 | fi |
| 6585 | |
| 6586 | if test "X$skipped_export" != "X:" && |
| 6587 | func_len " $test_cmds" && |
| 6588 | len=$func_len_result && |
| 6589 | test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then |
| 6590 | : |
| 6591 | else |
| 6592 | # The command line is too long to link in one step, link piecewise |
| 6593 | # or, if using GNU ld and skipped_export is not :, use a linker |
| 6594 | # script. |
| 6595 | |
| 6596 | # Save the value of $output and $libobjs because we want to |
| 6597 | # use them later. If we have whole_archive_flag_spec, we |
| 6598 | # want to use save_libobjs as it was before |
| 6599 | # whole_archive_flag_spec was expanded, because we can't |
| 6600 | # assume the linker understands whole_archive_flag_spec. |
| 6601 | # This may have to be revisited, in case too many |
| 6602 | # convenience libraries get linked in and end up exceeding |
| 6603 | # the spec. |
| 6604 | if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then |
| 6605 | save_libobjs=$libobjs |
| 6606 | fi |
| 6607 | save_output=$output |
| 6608 | output_la=`$ECHO "X$output" | $Xsed -e "$basename"` |
| 6609 | |
| 6610 | # Clear the reloadable object creation command queue and |
| 6611 | # initialize k to one. |
| 6612 | test_cmds= |
| 6613 | concat_cmds= |
| 6614 | objlist= |
| 6615 | last_robj= |
| 6616 | k=1 |
| 6617 | |
| 6618 | if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then |
| 6619 | output=${output_objdir}/${output_la}.lnkscript |
| 6620 | func_verbose "creating GNU ld script: $output" |
| 6621 | $ECHO 'INPUT (' > $output |
| 6622 | for obj in $save_libobjs |
| 6623 | do |
| 6624 | $ECHO "$obj" >> $output |
| 6625 | done |
| 6626 | $ECHO ')' >> $output |
| 6627 | delfiles="$delfiles $output" |
| 6628 | elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then |
| 6629 | output=${output_objdir}/${output_la}.lnk |
| 6630 | func_verbose "creating linker input file list: $output" |
| 6631 | : > $output |
| 6632 | set x $save_libobjs |
| 6633 | shift |
| 6634 | firstobj= |
| 6635 | if test "$compiler_needs_object" = yes; then |
| 6636 | firstobj="$1 " |
| 6637 | shift |
| 6638 | fi |
| 6639 | for obj |
| 6640 | do |
| 6641 | $ECHO "$obj" >> $output |
| 6642 | done |
| 6643 | delfiles="$delfiles $output" |
| 6644 | output=$firstobj\"$file_list_spec$output\" |
| 6645 | else |
| 6646 | if test -n "$save_libobjs"; then |
| 6647 | func_verbose "creating reloadable object files..." |
| 6648 | output=$output_objdir/$output_la-${k}.$objext |
| 6649 | eval test_cmds=\"$reload_cmds\" |
| 6650 | func_len " $test_cmds" |
| 6651 | len0=$func_len_result |
| 6652 | len=$len0 |
| 6653 | |
| 6654 | # Loop over the list of objects to be linked. |
| 6655 | for obj in $save_libobjs |
| 6656 | do |
| 6657 | func_len " $obj" |
| 6658 | func_arith $len + $func_len_result |
| 6659 | len=$func_arith_result |
| 6660 | if test "X$objlist" = X || |
| 6661 | test "$len" -lt "$max_cmd_len"; then |
| 6662 | func_append objlist " $obj" |
| 6663 | else |
| 6664 | # The command $test_cmds is almost too long, add a |
| 6665 | # command to the queue. |
| 6666 | if test "$k" -eq 1 ; then |
| 6667 | # The first file doesn't have a previous command to add. |
| 6668 | eval concat_cmds=\"$reload_cmds $objlist $last_robj\" |
| 6669 | else |
| 6670 | # All subsequent reloadable object files will link in |
| 6671 | # the last one created. |
| 6672 | eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" |
| 6673 | fi |
| 6674 | last_robj=$output_objdir/$output_la-${k}.$objext |
| 6675 | func_arith $k + 1 |
| 6676 | k=$func_arith_result |
| 6677 | output=$output_objdir/$output_la-${k}.$objext |
| 6678 | objlist=$obj |
| 6679 | func_len " $last_robj" |
| 6680 | func_arith $len0 + $func_len_result |
| 6681 | len=$func_arith_result |
| 6682 | fi |
| 6683 | done |
| 6684 | # Handle the remaining objects by creating one last |
| 6685 | # reloadable object file. All subsequent reloadable object |
| 6686 | # files will link in the last one created. |
| 6687 | test -z "$concat_cmds" || concat_cmds=$concat_cmds~ |
| 6688 | eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" |
| 6689 | if test -n "$last_robj"; then |
| 6690 | eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" |
| 6691 | fi |
| 6692 | delfiles="$delfiles $output" |
| 6693 | |
| 6694 | else |
| 6695 | output= |
| 6696 | fi |
| 6697 | |
| 6698 | if ${skipped_export-false}; then |
| 6699 | func_verbose "generating symbol list for \`$libname.la'" |
| 6700 | export_symbols="$output_objdir/$libname.exp" |
| 6701 | $opt_dry_run || $RM $export_symbols |
| 6702 | libobjs=$output |
| 6703 | # Append the command to create the export file. |
| 6704 | test -z "$concat_cmds" || concat_cmds=$concat_cmds~ |
| 6705 | eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" |
| 6706 | if test -n "$last_robj"; then |
| 6707 | eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" |
| 6708 | fi |
| 6709 | fi |
| 6710 | |
| 6711 | test -n "$save_libobjs" && |
| 6712 | func_verbose "creating a temporary reloadable object file: $output" |
| 6713 | |
| 6714 | # Loop through the commands generated above and execute them. |
| 6715 | save_ifs="$IFS"; IFS='~' |
| 6716 | for cmd in $concat_cmds; do |
| 6717 | IFS="$save_ifs" |
| 6718 | $opt_silent || { |
| 6719 | func_quote_for_expand "$cmd" |
| 6720 | eval "func_echo $func_quote_for_expand_result" |
| 6721 | } |
| 6722 | $opt_dry_run || eval "$cmd" || { |
| 6723 | lt_exit=$? |
| 6724 | |
| 6725 | # Restore the uninstalled library and exit |
| 6726 | if test "$mode" = relink; then |
| 6727 | ( cd "$output_objdir" && \ |
| 6728 | $RM "${realname}T" && \ |
| 6729 | $MV "${realname}U" "$realname" ) |
| 6730 | fi |
| 6731 | |
| 6732 | exit $lt_exit |
| 6733 | } |
| 6734 | done |
| 6735 | IFS="$save_ifs" |
| 6736 | |
| 6737 | if test -n "$export_symbols_regex" && ${skipped_export-false}; then |
| 6738 | func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' |
| 6739 | func_show_eval '$MV "${export_symbols}T" "$export_symbols"' |
| 6740 | fi |
| 6741 | fi |
| 6742 | |
| 6743 | if ${skipped_export-false}; then |
| 6744 | if test -n "$export_symbols" && test -n "$include_expsyms"; then |
| 6745 | tmp_export_symbols="$export_symbols" |
| 6746 | test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" |
| 6747 | $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' |
| 6748 | fi |
| 6749 | |
| 6750 | if test -n "$orig_export_symbols"; then |
| 6751 | # The given exports_symbols file has to be filtered, so filter it. |
| 6752 | func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" |
| 6753 | # FIXME: $output_objdir/$libname.filter potentially contains lots of |
| 6754 | # 's' commands which not all seds can handle. GNU sed should be fine |
| 6755 | # though. Also, the filter scales superlinearly with the number of |
| 6756 | # global variables. join(1) would be nice here, but unfortunately |
| 6757 | # isn't a blessed tool. |
| 6758 | $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter |
| 6759 | delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" |
| 6760 | export_symbols=$output_objdir/$libname.def |
| 6761 | $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols |
| 6762 | fi |
| 6763 | fi |
| 6764 | |
| 6765 | libobjs=$output |
| 6766 | # Restore the value of output. |
| 6767 | output=$save_output |
| 6768 | |
| 6769 | if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then |
| 6770 | eval libobjs=\"\$libobjs $whole_archive_flag_spec\" |
| 6771 | test "X$libobjs" = "X " && libobjs= |
| 6772 | fi |
| 6773 | # Expand the library linking commands again to reset the |
| 6774 | # value of $libobjs for piecewise linking. |
| 6775 | |
| 6776 | # Do each of the archive commands. |
| 6777 | if test "$module" = yes && test -n "$module_cmds" ; then |
| 6778 | if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then |
| 6779 | cmds=$module_expsym_cmds |
| 6780 | else |
| 6781 | cmds=$module_cmds |
| 6782 | fi |
| 6783 | else |
| 6784 | if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then |
| 6785 | cmds=$archive_expsym_cmds |
| 6786 | else |
| 6787 | cmds=$archive_cmds |
| 6788 | fi |
| 6789 | fi |
| 6790 | fi |
| 6791 | |
| 6792 | if test -n "$delfiles"; then |
| 6793 | # Append the command to remove temporary files to $cmds. |
| 6794 | eval cmds=\"\$cmds~\$RM $delfiles\" |
| 6795 | fi |
| 6796 | |
| 6797 | # Add any objects from preloaded convenience libraries |
| 6798 | if test -n "$dlprefiles"; then |
| 6799 | gentop="$output_objdir/${outputname}x" |
| 6800 | generated="$generated $gentop" |
| 6801 | |
| 6802 | func_extract_archives $gentop $dlprefiles |
| 6803 | libobjs="$libobjs $func_extract_archives_result" |
| 6804 | test "X$libobjs" = "X " && libobjs= |
| 6805 | fi |
| 6806 | |
| 6807 | save_ifs="$IFS"; IFS='~' |
| 6808 | for cmd in $cmds; do |
| 6809 | IFS="$save_ifs" |
| 6810 | eval cmd=\"$cmd\" |
| 6811 | $opt_silent || { |
| 6812 | func_quote_for_expand "$cmd" |
| 6813 | eval "func_echo $func_quote_for_expand_result" |
| 6814 | } |
| 6815 | $opt_dry_run || eval "$cmd" || { |
| 6816 | lt_exit=$? |
| 6817 | |
| 6818 | # Restore the uninstalled library and exit |
| 6819 | if test "$mode" = relink; then |
| 6820 | ( cd "$output_objdir" && \ |
| 6821 | $RM "${realname}T" && \ |
| 6822 | $MV "${realname}U" "$realname" ) |
| 6823 | fi |
| 6824 | |
| 6825 | exit $lt_exit |
| 6826 | } |
| 6827 | done |
| 6828 | IFS="$save_ifs" |
| 6829 | |
| 6830 | # Restore the uninstalled library and exit |
| 6831 | if test "$mode" = relink; then |
| 6832 | $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? |
| 6833 | |
| 6834 | if test -n "$convenience"; then |
| 6835 | if test -z "$whole_archive_flag_spec"; then |
| 6836 | func_show_eval '${RM}r "$gentop"' |
| 6837 | fi |
| 6838 | fi |
| 6839 | |
| 6840 | exit $EXIT_SUCCESS |
| 6841 | fi |
| 6842 | |
| 6843 | # Create links to the real library. |
| 6844 | for linkname in $linknames; do |
| 6845 | if test "$realname" != "$linkname"; then |
| 6846 | func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' |
| 6847 | fi |
| 6848 | done |
| 6849 | |
| 6850 | # If -module or -export-dynamic was specified, set the dlname. |
| 6851 | if test "$module" = yes || test "$export_dynamic" = yes; then |
| 6852 | # On all known operating systems, these are identical. |
| 6853 | dlname="$soname" |
| 6854 | fi |
| 6855 | fi |
| 6856 | ;; |
| 6857 | |
| 6858 | obj) |
| 6859 | if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then |
| 6860 | func_warning "\`-dlopen' is ignored for objects" |
| 6861 | fi |
| 6862 | |
| 6863 | case " $deplibs" in |
| 6864 | *\ -l* | *\ -L*) |
| 6865 | func_warning "\`-l' and \`-L' are ignored for objects" ;; |
| 6866 | esac |
| 6867 | |
| 6868 | test -n "$rpath" && \ |
| 6869 | func_warning "\`-rpath' is ignored for objects" |
| 6870 | |
| 6871 | test -n "$xrpath" && \ |
| 6872 | func_warning "\`-R' is ignored for objects" |
| 6873 | |
| 6874 | test -n "$vinfo" && \ |
| 6875 | func_warning "\`-version-info' is ignored for objects" |
| 6876 | |
| 6877 | test -n "$release" && \ |
| 6878 | func_warning "\`-release' is ignored for objects" |
| 6879 | |
| 6880 | case $output in |
| 6881 | *.lo) |
| 6882 | test -n "$objs$old_deplibs" && \ |
| 6883 | func_fatal_error "cannot build library object \`$output' from non-libtool objects" |
| 6884 | |
| 6885 | libobj=$output |
| 6886 | func_lo2o "$libobj" |
| 6887 | obj=$func_lo2o_result |
| 6888 | ;; |
| 6889 | *) |
| 6890 | libobj= |
| 6891 | obj="$output" |
| 6892 | ;; |
| 6893 | esac |
| 6894 | |
| 6895 | # Delete the old objects. |
| 6896 | $opt_dry_run || $RM $obj $libobj |
| 6897 | |
| 6898 | # Objects from convenience libraries. This assumes |
| 6899 | # single-version convenience libraries. Whenever we create |
| 6900 | # different ones for PIC/non-PIC, this we'll have to duplicate |
| 6901 | # the extraction. |
| 6902 | reload_conv_objs= |
| 6903 | gentop= |
| 6904 | # reload_cmds runs $LD directly, so let us get rid of |
| 6905 | # -Wl from whole_archive_flag_spec and hope we can get by with |
| 6906 | # turning comma into space.. |
| 6907 | wl= |
| 6908 | |
| 6909 | if test -n "$convenience"; then |
| 6910 | if test -n "$whole_archive_flag_spec"; then |
| 6911 | eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" |
| 6912 | reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` |
| 6913 | else |
| 6914 | gentop="$output_objdir/${obj}x" |
| 6915 | generated="$generated $gentop" |
| 6916 | |
| 6917 | func_extract_archives $gentop $convenience |
| 6918 | reload_conv_objs="$reload_objs $func_extract_archives_result" |
| 6919 | fi |
| 6920 | fi |
| 6921 | |
| 6922 | # Create the old-style object. |
| 6923 | reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test |
| 6924 | |
| 6925 | output="$obj" |
| 6926 | func_execute_cmds "$reload_cmds" 'exit $?' |
| 6927 | |
| 6928 | # Exit if we aren't doing a library object file. |
| 6929 | if test -z "$libobj"; then |
| 6930 | if test -n "$gentop"; then |
| 6931 | func_show_eval '${RM}r "$gentop"' |
| 6932 | fi |
| 6933 | |
| 6934 | exit $EXIT_SUCCESS |
| 6935 | fi |
| 6936 | |
| 6937 | if test "$build_libtool_libs" != yes; then |
| 6938 | if test -n "$gentop"; then |
| 6939 | func_show_eval '${RM}r "$gentop"' |
| 6940 | fi |
| 6941 | |
| 6942 | # Create an invalid libtool object if no PIC, so that we don't |
| 6943 | # accidentally link it into a program. |
| 6944 | # $show "echo timestamp > $libobj" |
| 6945 | # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? |
| 6946 | exit $EXIT_SUCCESS |
| 6947 | fi |
| 6948 | |
| 6949 | if test -n "$pic_flag" || test "$pic_mode" != default; then |
| 6950 | # Only do commands if we really have different PIC objects. |
| 6951 | reload_objs="$libobjs $reload_conv_objs" |
| 6952 | output="$libobj" |
| 6953 | func_execute_cmds "$reload_cmds" 'exit $?' |
| 6954 | fi |
| 6955 | |
| 6956 | if test -n "$gentop"; then |
| 6957 | func_show_eval '${RM}r "$gentop"' |
| 6958 | fi |
| 6959 | |
| 6960 | exit $EXIT_SUCCESS |
| 6961 | ;; |
| 6962 | |
| 6963 | prog) |
| 6964 | case $host in |
| 6965 | *cygwin*) func_stripname '' '.exe' "$output" |
| 6966 | output=$func_stripname_result.exe;; |
| 6967 | esac |
| 6968 | test -n "$vinfo" && \ |
| 6969 | func_warning "\`-version-info' is ignored for programs" |
| 6970 | |
| 6971 | test -n "$release" && \ |
| 6972 | func_warning "\`-release' is ignored for programs" |
| 6973 | |
| 6974 | test "$preload" = yes \ |
| 6975 | && test "$dlopen_support" = unknown \ |
| 6976 | && test "$dlopen_self" = unknown \ |
| 6977 | && test "$dlopen_self_static" = unknown && \ |
| 6978 | func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." |
| 6979 | |
| 6980 | case $host in |
| 6981 | *-*-rhapsody* | *-*-darwin1.[012]) |
| 6982 | # On Rhapsody replace the C library is the System framework |
| 6983 | compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` |
| 6984 | finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` |
| 6985 | ;; |
| 6986 | esac |
| 6987 | |
| 6988 | case $host in |
| 6989 | *-*-darwin*) |
| 6990 | # Don't allow lazy linking, it breaks C++ global constructors |
| 6991 | # But is supposedly fixed on 10.4 or later (yay!). |
| 6992 | if test "$tagname" = CXX ; then |
| 6993 | case ${MACOSX_DEPLOYMENT_TARGET-10.0} in |
| 6994 | 10.[0123]) |
| 6995 | compile_command="$compile_command ${wl}-bind_at_load" |
| 6996 | finalize_command="$finalize_command ${wl}-bind_at_load" |
| 6997 | ;; |
| 6998 | esac |
| 6999 | fi |
| 7000 | # Time to change all our "foo.ltframework" stuff back to "-framework foo" |
| 7001 | compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` |
| 7002 | finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` |
| 7003 | ;; |
| 7004 | esac |
| 7005 | |
| 7006 | |
| 7007 | # move library search paths that coincide with paths to not yet |
| 7008 | # installed libraries to the beginning of the library search list |
| 7009 | new_libs= |
| 7010 | for path in $notinst_path; do |
| 7011 | case " $new_libs " in |
| 7012 | *" -L$path/$objdir "*) ;; |
| 7013 | *) |
| 7014 | case " $compile_deplibs " in |
| 7015 | *" -L$path/$objdir "*) |
| 7016 | new_libs="$new_libs -L$path/$objdir" ;; |
| 7017 | esac |
| 7018 | ;; |
| 7019 | esac |
| 7020 | done |
| 7021 | for deplib in $compile_deplibs; do |
| 7022 | case $deplib in |
| 7023 | -L*) |
| 7024 | case " $new_libs " in |
| 7025 | *" $deplib "*) ;; |
| 7026 | *) new_libs="$new_libs $deplib" ;; |
| 7027 | esac |
| 7028 | ;; |
| 7029 | *) new_libs="$new_libs $deplib" ;; |
| 7030 | esac |
| 7031 | done |
| 7032 | compile_deplibs="$new_libs" |
| 7033 | |
| 7034 | |
| 7035 | compile_command="$compile_command $compile_deplibs" |
| 7036 | finalize_command="$finalize_command $finalize_deplibs" |
| 7037 | |
| 7038 | if test -n "$rpath$xrpath"; then |
| 7039 | # If the user specified any rpath flags, then add them. |
| 7040 | for libdir in $rpath $xrpath; do |
| 7041 | # This is the magic to use -rpath. |
| 7042 | case "$finalize_rpath " in |
| 7043 | *" $libdir "*) ;; |
| 7044 | *) finalize_rpath="$finalize_rpath $libdir" ;; |
| 7045 | esac |
| 7046 | done |
| 7047 | fi |
| 7048 | |
| 7049 | # Now hardcode the library paths |
| 7050 | rpath= |
| 7051 | hardcode_libdirs= |
| 7052 | for libdir in $compile_rpath $finalize_rpath; do |
| 7053 | if test -n "$hardcode_libdir_flag_spec"; then |
| 7054 | if test -n "$hardcode_libdir_separator"; then |
| 7055 | if test -z "$hardcode_libdirs"; then |
| 7056 | hardcode_libdirs="$libdir" |
| 7057 | else |
| 7058 | # Just accumulate the unique libdirs. |
| 7059 | case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in |
| 7060 | *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) |
| 7061 | ;; |
| 7062 | *) |
| 7063 | hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" |
| 7064 | ;; |
| 7065 | esac |
| 7066 | fi |
| 7067 | else |
| 7068 | eval flag=\"$hardcode_libdir_flag_spec\" |
| 7069 | rpath="$rpath $flag" |
| 7070 | fi |
| 7071 | elif test -n "$runpath_var"; then |
| 7072 | case "$perm_rpath " in |
| 7073 | *" $libdir "*) ;; |
| 7074 | *) perm_rpath="$perm_rpath $libdir" ;; |
| 7075 | esac |
| 7076 | fi |
| 7077 | case $host in |
| 7078 | *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) |
| 7079 | testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` |
| 7080 | case :$dllsearchpath: in |
| 7081 | *":$libdir:"*) ;; |
| 7082 | *) dllsearchpath="$dllsearchpath:$libdir";; |
| 7083 | esac |
| 7084 | case :$dllsearchpath: in |
| 7085 | *":$testbindir:"*) ;; |
| 7086 | *) dllsearchpath="$dllsearchpath:$testbindir";; |
| 7087 | esac |
| 7088 | ;; |
| 7089 | esac |
| 7090 | done |
| 7091 | # Substitute the hardcoded libdirs into the rpath. |
| 7092 | if test -n "$hardcode_libdir_separator" && |
| 7093 | test -n "$hardcode_libdirs"; then |
| 7094 | libdir="$hardcode_libdirs" |
| 7095 | eval rpath=\" $hardcode_libdir_flag_spec\" |
| 7096 | fi |
| 7097 | compile_rpath="$rpath" |
| 7098 | |
| 7099 | rpath= |
| 7100 | hardcode_libdirs= |
| 7101 | for libdir in $finalize_rpath; do |
| 7102 | if test -n "$hardcode_libdir_flag_spec"; then |
| 7103 | if test -n "$hardcode_libdir_separator"; then |
| 7104 | if test -z "$hardcode_libdirs"; then |
| 7105 | hardcode_libdirs="$libdir" |
| 7106 | else |
| 7107 | # Just accumulate the unique libdirs. |
| 7108 | case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in |
| 7109 | *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) |
| 7110 | ;; |
| 7111 | *) |
| 7112 | hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" |
| 7113 | ;; |
| 7114 | esac |
| 7115 | fi |
| 7116 | else |
| 7117 | eval flag=\"$hardcode_libdir_flag_spec\" |
| 7118 | rpath="$rpath $flag" |
| 7119 | fi |
| 7120 | elif test -n "$runpath_var"; then |
| 7121 | case "$finalize_perm_rpath " in |
| 7122 | *" $libdir "*) ;; |
| 7123 | *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; |
| 7124 | esac |
| 7125 | fi |
| 7126 | done |
| 7127 | # Substitute the hardcoded libdirs into the rpath. |
| 7128 | if test -n "$hardcode_libdir_separator" && |
| 7129 | test -n "$hardcode_libdirs"; then |
| 7130 | libdir="$hardcode_libdirs" |
| 7131 | eval rpath=\" $hardcode_libdir_flag_spec\" |
| 7132 | fi |
| 7133 | finalize_rpath="$rpath" |
| 7134 | |
| 7135 | if test -n "$libobjs" && test "$build_old_libs" = yes; then |
| 7136 | # Transform all the library objects into standard objects. |
| 7137 | compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` |
| 7138 | finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` |
| 7139 | fi |
| 7140 | |
| 7141 | func_generate_dlsyms "$outputname" "@PROGRAM@" "no" |
| 7142 | |
| 7143 | # template prelinking step |
| 7144 | if test -n "$prelink_cmds"; then |
| 7145 | func_execute_cmds "$prelink_cmds" 'exit $?' |
| 7146 | fi |
| 7147 | |
| 7148 | wrappers_required=yes |
| 7149 | case $host in |
| 7150 | *cygwin* | *mingw* ) |
| 7151 | if test "$build_libtool_libs" != yes; then |
| 7152 | wrappers_required=no |
| 7153 | fi |
| 7154 | ;; |
| 7155 | *) |
| 7156 | if test "$need_relink" = no || test "$build_libtool_libs" != yes; then |
| 7157 | wrappers_required=no |
| 7158 | fi |
| 7159 | ;; |
| 7160 | esac |
| 7161 | if test "$wrappers_required" = no; then |
| 7162 | # Replace the output file specification. |
| 7163 | compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` |
| 7164 | link_command="$compile_command$compile_rpath" |
| 7165 | |
| 7166 | # We have no uninstalled library dependencies, so finalize right now. |
| 7167 | exit_status=0 |
| 7168 | func_show_eval "$link_command" 'exit_status=$?' |
| 7169 | |
| 7170 | # Delete the generated files. |
| 7171 | if test -f "$output_objdir/${outputname}S.${objext}"; then |
| 7172 | func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' |
| 7173 | fi |
| 7174 | |
| 7175 | exit $exit_status |
| 7176 | fi |
| 7177 | |
| 7178 | if test -n "$compile_shlibpath$finalize_shlibpath"; then |
| 7179 | compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" |
| 7180 | fi |
| 7181 | if test -n "$finalize_shlibpath"; then |
| 7182 | finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" |
| 7183 | fi |
| 7184 | |
| 7185 | compile_var= |
| 7186 | finalize_var= |
| 7187 | if test -n "$runpath_var"; then |
| 7188 | if test -n "$perm_rpath"; then |
| 7189 | # We should set the runpath_var. |
| 7190 | rpath= |
| 7191 | for dir in $perm_rpath; do |
| 7192 | rpath="$rpath$dir:" |
| 7193 | done |
| 7194 | compile_var="$runpath_var=\"$rpath\$$runpath_var\" " |
| 7195 | fi |
| 7196 | if test -n "$finalize_perm_rpath"; then |
| 7197 | # We should set the runpath_var. |
| 7198 | rpath= |
| 7199 | for dir in $finalize_perm_rpath; do |
| 7200 | rpath="$rpath$dir:" |
| 7201 | done |
| 7202 | finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " |
| 7203 | fi |
| 7204 | fi |
| 7205 | |
| 7206 | if test "$no_install" = yes; then |
| 7207 | # We don't need to create a wrapper script. |
| 7208 | link_command="$compile_var$compile_command$compile_rpath" |
| 7209 | # Replace the output file specification. |
| 7210 | link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` |
| 7211 | # Delete the old output file. |
| 7212 | $opt_dry_run || $RM $output |
| 7213 | # Link the executable and exit |
| 7214 | func_show_eval "$link_command" 'exit $?' |
| 7215 | exit $EXIT_SUCCESS |
| 7216 | fi |
| 7217 | |
| 7218 | if test "$hardcode_action" = relink; then |
| 7219 | # Fast installation is not supported |
| 7220 | link_command="$compile_var$compile_command$compile_rpath" |
| 7221 | relink_command="$finalize_var$finalize_command$finalize_rpath" |
| 7222 | |
| 7223 | func_warning "this platform does not like uninstalled shared libraries" |
| 7224 | func_warning "\`$output' will be relinked during installation" |
| 7225 | else |
| 7226 | if test "$fast_install" != no; then |
| 7227 | link_command="$finalize_var$compile_command$finalize_rpath" |
| 7228 | if test "$fast_install" = yes; then |
| 7229 | relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` |
| 7230 | else |
| 7231 | # fast_install is set to needless |
| 7232 | relink_command= |
| 7233 | fi |
| 7234 | else |
| 7235 | link_command="$compile_var$compile_command$compile_rpath" |
| 7236 | relink_command="$finalize_var$finalize_command$finalize_rpath" |
| 7237 | fi |
| 7238 | fi |
| 7239 | |
| 7240 | # Replace the output file specification. |
| 7241 | link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` |
| 7242 | |
| 7243 | # Delete the old output files. |
| 7244 | $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname |
| 7245 | |
| 7246 | func_show_eval "$link_command" 'exit $?' |
| 7247 | |
| 7248 | # Now create the wrapper script. |
| 7249 | func_verbose "creating $output" |
| 7250 | |
| 7251 | # Quote the relink command for shipping. |
| 7252 | if test -n "$relink_command"; then |
| 7253 | # Preserve any variables that may affect compiler behavior |
| 7254 | for var in $variables_saved_for_relink; do |
| 7255 | if eval test -z \"\${$var+set}\"; then |
| 7256 | relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" |
| 7257 | elif eval var_value=\$$var; test -z "$var_value"; then |
| 7258 | relink_command="$var=; export $var; $relink_command" |
| 7259 | else |
| 7260 | func_quote_for_eval "$var_value" |
| 7261 | relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" |
| 7262 | fi |
| 7263 | done |
| 7264 | relink_command="(cd `pwd`; $relink_command)" |
| 7265 | relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` |
| 7266 | fi |
| 7267 | |
| 7268 | # Quote $ECHO for shipping. |
| 7269 | if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then |
| 7270 | case $progpath in |
| 7271 | [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; |
| 7272 | *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; |
| 7273 | esac |
| 7274 | qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` |
| 7275 | else |
| 7276 | qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` |
| 7277 | fi |
| 7278 | |
| 7279 | # Only actually do things if not in dry run mode. |
| 7280 | $opt_dry_run || { |
| 7281 | # win32 will think the script is a binary if it has |
| 7282 | # a .exe suffix, so we strip it off here. |
| 7283 | case $output in |
| 7284 | *.exe) func_stripname '' '.exe' "$output" |
| 7285 | output=$func_stripname_result ;; |
| 7286 | esac |
| 7287 | # test for cygwin because mv fails w/o .exe extensions |
| 7288 | case $host in |
| 7289 | *cygwin*) |
| 7290 | exeext=.exe |
| 7291 | func_stripname '' '.exe' "$outputname" |
| 7292 | outputname=$func_stripname_result ;; |
| 7293 | *) exeext= ;; |
| 7294 | esac |
| 7295 | case $host in |
| 7296 | *cygwin* | *mingw* ) |
| 7297 | func_dirname_and_basename "$output" "" "." |
| 7298 | output_name=$func_basename_result |
| 7299 | output_path=$func_dirname_result |
| 7300 | cwrappersource="$output_path/$objdir/lt-$output_name.c" |
| 7301 | cwrapper="$output_path/$output_name.exe" |
| 7302 | $RM $cwrappersource $cwrapper |
| 7303 | trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 |
| 7304 | |
| 7305 | func_emit_cwrapperexe_src > $cwrappersource |
| 7306 | |
| 7307 | # we should really use a build-platform specific compiler |
| 7308 | # here, but OTOH, the wrappers (shell script and this C one) |
| 7309 | # are only useful if you want to execute the "real" binary. |
| 7310 | # Since the "real" binary is built for $host, then this |
| 7311 | # wrapper might as well be built for $host, too. |
| 7312 | $opt_dry_run || { |
| 7313 | $LTCC $LTCFLAGS -o $cwrapper $cwrappersource |
| 7314 | $STRIP $cwrapper |
| 7315 | } |
| 7316 | |
| 7317 | # Now, create the wrapper script for func_source use: |
| 7318 | func_ltwrapper_scriptname $cwrapper |
| 7319 | $RM $func_ltwrapper_scriptname_result |
| 7320 | trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 |
| 7321 | $opt_dry_run || { |
| 7322 | # note: this script will not be executed, so do not chmod. |
| 7323 | if test "x$build" = "x$host" ; then |
| 7324 | $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result |
| 7325 | else |
| 7326 | func_emit_wrapper no > $func_ltwrapper_scriptname_result |
| 7327 | fi |
| 7328 | } |
| 7329 | ;; |
| 7330 | * ) |
| 7331 | $RM $output |
| 7332 | trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 |
| 7333 | |
| 7334 | func_emit_wrapper no > $output |
| 7335 | chmod +x $output |
| 7336 | ;; |
| 7337 | esac |
| 7338 | } |
| 7339 | exit $EXIT_SUCCESS |
| 7340 | ;; |
| 7341 | esac |
| 7342 | |
| 7343 | # See if we need to build an old-fashioned archive. |
| 7344 | for oldlib in $oldlibs; do |
| 7345 | |
| 7346 | if test "$build_libtool_libs" = convenience; then |
| 7347 | oldobjs="$libobjs_save $symfileobj" |
| 7348 | addlibs="$convenience" |
| 7349 | build_libtool_libs=no |
| 7350 | else |
| 7351 | if test "$build_libtool_libs" = module; then |
| 7352 | oldobjs="$libobjs_save" |
| 7353 | build_libtool_libs=no |
| 7354 | else |
| 7355 | oldobjs="$old_deplibs $non_pic_objects" |
| 7356 | if test "$preload" = yes && test -f "$symfileobj"; then |
| 7357 | oldobjs="$oldobjs $symfileobj" |
| 7358 | fi |
| 7359 | fi |
| 7360 | addlibs="$old_convenience" |
| 7361 | fi |
| 7362 | |
| 7363 | if test -n "$addlibs"; then |
| 7364 | gentop="$output_objdir/${outputname}x" |
| 7365 | generated="$generated $gentop" |
| 7366 | |
| 7367 | func_extract_archives $gentop $addlibs |
| 7368 | oldobjs="$oldobjs $func_extract_archives_result" |
| 7369 | fi |
| 7370 | |
| 7371 | # Do each command in the archive commands. |
| 7372 | if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then |
| 7373 | cmds=$old_archive_from_new_cmds |
| 7374 | else |
| 7375 | |
| 7376 | # Add any objects from preloaded convenience libraries |
| 7377 | if test -n "$dlprefiles"; then |
| 7378 | gentop="$output_objdir/${outputname}x" |
| 7379 | generated="$generated $gentop" |
| 7380 | |
| 7381 | func_extract_archives $gentop $dlprefiles |
| 7382 | oldobjs="$oldobjs $func_extract_archives_result" |
| 7383 | fi |
| 7384 | |
| 7385 | # POSIX demands no paths to be encoded in archives. We have |
| 7386 | # to avoid creating archives with duplicate basenames if we |
| 7387 | # might have to extract them afterwards, e.g., when creating a |
| 7388 | # static archive out of a convenience library, or when linking |
| 7389 | # the entirety of a libtool archive into another (currently |
| 7390 | # not supported by libtool). |
| 7391 | if (for obj in $oldobjs |
| 7392 | do |
| 7393 | func_basename "$obj" |
| 7394 | $ECHO "$func_basename_result" |
| 7395 | done | sort | sort -uc >/dev/null 2>&1); then |
| 7396 | : |
| 7397 | else |
| 7398 | $ECHO "copying selected object files to avoid basename conflicts..." |
| 7399 | gentop="$output_objdir/${outputname}x" |
| 7400 | generated="$generated $gentop" |
| 7401 | func_mkdir_p "$gentop" |
| 7402 | save_oldobjs=$oldobjs |
| 7403 | oldobjs= |
| 7404 | counter=1 |
| 7405 | for obj in $save_oldobjs |
| 7406 | do |
| 7407 | func_basename "$obj" |
| 7408 | objbase="$func_basename_result" |
| 7409 | case " $oldobjs " in |
| 7410 | " ") oldobjs=$obj ;; |
| 7411 | *[\ /]"$objbase "*) |
| 7412 | while :; do |
| 7413 | # Make sure we don't pick an alternate name that also |
| 7414 | # overlaps. |
| 7415 | newobj=lt$counter-$objbase |
| 7416 | func_arith $counter + 1 |
| 7417 | counter=$func_arith_result |
| 7418 | case " $oldobjs " in |
| 7419 | *[\ /]"$newobj "*) ;; |
| 7420 | *) if test ! -f "$gentop/$newobj"; then break; fi ;; |
| 7421 | esac |
| 7422 | done |
| 7423 | func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" |
| 7424 | oldobjs="$oldobjs $gentop/$newobj" |
| 7425 | ;; |
| 7426 | *) oldobjs="$oldobjs $obj" ;; |
| 7427 | esac |
| 7428 | done |
| 7429 | fi |
| 7430 | eval cmds=\"$old_archive_cmds\" |
| 7431 | |
| 7432 | func_len " $cmds" |
| 7433 | len=$func_len_result |
| 7434 | if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then |
| 7435 | cmds=$old_archive_cmds |
| 7436 | else |
| 7437 | # the command line is too long to link in one step, link in parts |
| 7438 | func_verbose "using piecewise archive linking..." |
| 7439 | save_RANLIB=$RANLIB |
| 7440 | RANLIB=: |
| 7441 | objlist= |
| 7442 | concat_cmds= |
| 7443 | save_oldobjs=$oldobjs |
| 7444 | oldobjs= |
| 7445 | # Is there a better way of finding the last object in the list? |
| 7446 | for obj in $save_oldobjs |
| 7447 | do |
| 7448 | last_oldobj=$obj |
| 7449 | done |
| 7450 | eval test_cmds=\"$old_archive_cmds\" |
| 7451 | func_len " $test_cmds" |
| 7452 | len0=$func_len_result |
| 7453 | len=$len0 |
| 7454 | for obj in $save_oldobjs |
| 7455 | do |
| 7456 | func_len " $obj" |
| 7457 | func_arith $len + $func_len_result |
| 7458 | len=$func_arith_result |
| 7459 | func_append objlist " $obj" |
| 7460 | if test "$len" -lt "$max_cmd_len"; then |
| 7461 | : |
| 7462 | else |
| 7463 | # the above command should be used before it gets too long |
| 7464 | oldobjs=$objlist |
| 7465 | if test "$obj" = "$last_oldobj" ; then |
| 7466 | RANLIB=$save_RANLIB |
| 7467 | fi |
| 7468 | test -z "$concat_cmds" || concat_cmds=$concat_cmds~ |
| 7469 | eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" |
| 7470 | objlist= |
| 7471 | len=$len0 |
| 7472 | fi |
| 7473 | done |
| 7474 | RANLIB=$save_RANLIB |
| 7475 | oldobjs=$objlist |
| 7476 | if test "X$oldobjs" = "X" ; then |
| 7477 | eval cmds=\"\$concat_cmds\" |
| 7478 | else |
| 7479 | eval cmds=\"\$concat_cmds~\$old_archive_cmds\" |
| 7480 | fi |
| 7481 | fi |
| 7482 | fi |
| 7483 | func_execute_cmds "$cmds" 'exit $?' |
| 7484 | done |
| 7485 | |
| 7486 | test -n "$generated" && \ |
| 7487 | func_show_eval "${RM}r$generated" |
| 7488 | |
| 7489 | # Now create the libtool archive. |
| 7490 | case $output in |
| 7491 | *.la) |
| 7492 | old_library= |
| 7493 | test "$build_old_libs" = yes && old_library="$libname.$libext" |
| 7494 | func_verbose "creating $output" |
| 7495 | |
| 7496 | # Preserve any variables that may affect compiler behavior |
| 7497 | for var in $variables_saved_for_relink; do |
| 7498 | if eval test -z \"\${$var+set}\"; then |
| 7499 | relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" |
| 7500 | elif eval var_value=\$$var; test -z "$var_value"; then |
| 7501 | relink_command="$var=; export $var; $relink_command" |
| 7502 | else |
| 7503 | func_quote_for_eval "$var_value" |
| 7504 | relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" |
| 7505 | fi |
| 7506 | done |
| 7507 | # Quote the link command for shipping. |
| 7508 | relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" |
| 7509 | relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` |
| 7510 | if test "$hardcode_automatic" = yes ; then |
| 7511 | relink_command= |
| 7512 | fi |
| 7513 | |
| 7514 | # Only create the output if not a dry run. |
| 7515 | $opt_dry_run || { |
| 7516 | for installed in no yes; do |
| 7517 | if test "$installed" = yes; then |
| 7518 | if test -z "$install_libdir"; then |
| 7519 | break |
| 7520 | fi |
| 7521 | output="$output_objdir/$outputname"i |
| 7522 | # Replace all uninstalled libtool libraries with the installed ones |
| 7523 | newdependency_libs= |
| 7524 | for deplib in $dependency_libs; do |
| 7525 | case $deplib in |
| 7526 | *.la) |
| 7527 | func_basename "$deplib" |
| 7528 | name="$func_basename_result" |
| 7529 | eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` |
| 7530 | test -z "$libdir" && \ |
| 7531 | func_fatal_error "\`$deplib' is not a valid libtool archive" |
| 7532 | newdependency_libs="$newdependency_libs $libdir/$name" |
| 7533 | ;; |
| 7534 | *) newdependency_libs="$newdependency_libs $deplib" ;; |
| 7535 | esac |
| 7536 | done |
| 7537 | dependency_libs="$newdependency_libs" |
| 7538 | newdlfiles= |
| 7539 | |
| 7540 | for lib in $dlfiles; do |
| 7541 | case $lib in |
| 7542 | *.la) |
| 7543 | func_basename "$lib" |
| 7544 | name="$func_basename_result" |
| 7545 | eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` |
| 7546 | test -z "$libdir" && \ |
| 7547 | func_fatal_error "\`$lib' is not a valid libtool archive" |
| 7548 | newdlfiles="$newdlfiles $libdir/$name" |
| 7549 | ;; |
| 7550 | *) newdlfiles="$newdlfiles $lib" ;; |
| 7551 | esac |
| 7552 | done |
| 7553 | dlfiles="$newdlfiles" |
| 7554 | newdlprefiles= |
| 7555 | for lib in $dlprefiles; do |
| 7556 | case $lib in |
| 7557 | *.la) |
| 7558 | # Only pass preopened files to the pseudo-archive (for |
| 7559 | # eventual linking with the app. that links it) if we |
| 7560 | # didn't already link the preopened objects directly into |
| 7561 | # the library: |
| 7562 | func_basename "$lib" |
| 7563 | name="$func_basename_result" |
| 7564 | eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` |
| 7565 | test -z "$libdir" && \ |
| 7566 | func_fatal_error "\`$lib' is not a valid libtool archive" |
| 7567 | newdlprefiles="$newdlprefiles $libdir/$name" |
| 7568 | ;; |
| 7569 | esac |
| 7570 | done |
| 7571 | dlprefiles="$newdlprefiles" |
| 7572 | else |
| 7573 | newdlfiles= |
| 7574 | for lib in $dlfiles; do |
| 7575 | case $lib in |
| 7576 | [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; |
| 7577 | *) abs=`pwd`"/$lib" ;; |
| 7578 | esac |
| 7579 | newdlfiles="$newdlfiles $abs" |
| 7580 | done |
| 7581 | dlfiles="$newdlfiles" |
| 7582 | newdlprefiles= |
| 7583 | for lib in $dlprefiles; do |
| 7584 | case $lib in |
| 7585 | [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; |
| 7586 | *) abs=`pwd`"/$lib" ;; |
| 7587 | esac |
| 7588 | newdlprefiles="$newdlprefiles $abs" |
| 7589 | done |
| 7590 | dlprefiles="$newdlprefiles" |
| 7591 | fi |
| 7592 | $RM $output |
| 7593 | # place dlname in correct position for cygwin |
| 7594 | tdlname=$dlname |
| 7595 | case $host,$output,$installed,$module,$dlname in |
| 7596 | *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; |
| 7597 | esac |
| 7598 | $ECHO > $output "\ |
| 7599 | # $outputname - a libtool library file |
| 7600 | # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION |
| 7601 | # |
| 7602 | # Please DO NOT delete this file! |
| 7603 | # It is necessary for linking the library. |
| 7604 | |
| 7605 | # The name that we can dlopen(3). |
| 7606 | dlname='$tdlname' |
| 7607 | |
| 7608 | # Names of this library. |
| 7609 | library_names='$library_names' |
| 7610 | |
| 7611 | # The name of the static archive. |
| 7612 | old_library='$old_library' |
| 7613 | |
| 7614 | # Linker flags that can not go in dependency_libs. |
| 7615 | inherited_linker_flags='$new_inherited_linker_flags' |
| 7616 | |
| 7617 | # Libraries that this one depends upon. |
| 7618 | dependency_libs='$dependency_libs' |
| 7619 | |
| 7620 | # Names of additional weak libraries provided by this library |
| 7621 | weak_library_names='$weak_libs' |
| 7622 | |
| 7623 | # Version information for $libname. |
| 7624 | current=$current |
| 7625 | age=$age |
| 7626 | revision=$revision |
| 7627 | |
| 7628 | # Is this an already installed library? |
| 7629 | installed=$installed |
| 7630 | |
| 7631 | # Should we warn about portability when linking against -modules? |
| 7632 | shouldnotlink=$module |
| 7633 | |
| 7634 | # Files to dlopen/dlpreopen |
| 7635 | dlopen='$dlfiles' |
| 7636 | dlpreopen='$dlprefiles' |
| 7637 | |
| 7638 | # Directory that this library needs to be installed in: |
| 7639 | libdir='$install_libdir'" |
| 7640 | if test "$installed" = no && test "$need_relink" = yes; then |
| 7641 | $ECHO >> $output "\ |
| 7642 | relink_command=\"$relink_command\"" |
| 7643 | fi |
| 7644 | done |
| 7645 | } |
| 7646 | |
| 7647 | # Do a symbolic link so that the libtool archive can be found in |
| 7648 | # LD_LIBRARY_PATH before the program is installed. |
| 7649 | func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' |
| 7650 | ;; |
| 7651 | esac |
| 7652 | exit $EXIT_SUCCESS |
| 7653 | } |
| 7654 | |
| 7655 | { test "$mode" = link || test "$mode" = relink; } && |
| 7656 | func_mode_link ${1+"$@"} |
| 7657 | |
| 7658 | |
| 7659 | # func_mode_uninstall arg... |
| 7660 | func_mode_uninstall () |
| 7661 | { |
| 7662 | $opt_debug |
| 7663 | RM="$nonopt" |
| 7664 | files= |
| 7665 | rmforce= |
| 7666 | exit_status=0 |
| 7667 | |
| 7668 | # This variable tells wrapper scripts just to set variables rather |
| 7669 | # than running their programs. |
| 7670 | libtool_install_magic="$magic" |
| 7671 | |
| 7672 | for arg |
| 7673 | do |
| 7674 | case $arg in |
| 7675 | -f) RM="$RM $arg"; rmforce=yes ;; |
| 7676 | -*) RM="$RM $arg" ;; |
| 7677 | *) files="$files $arg" ;; |
| 7678 | esac |
| 7679 | done |
| 7680 | |
| 7681 | test -z "$RM" && \ |
| 7682 | func_fatal_help "you must specify an RM program" |
| 7683 | |
| 7684 | rmdirs= |
| 7685 | |
| 7686 | origobjdir="$objdir" |
| 7687 | for file in $files; do |
| 7688 | func_dirname "$file" "" "." |
| 7689 | dir="$func_dirname_result" |
| 7690 | if test "X$dir" = X.; then |
| 7691 | objdir="$origobjdir" |
| 7692 | else |
| 7693 | objdir="$dir/$origobjdir" |
| 7694 | fi |
| 7695 | func_basename "$file" |
| 7696 | name="$func_basename_result" |
| 7697 | test "$mode" = uninstall && objdir="$dir" |
| 7698 | |
| 7699 | # Remember objdir for removal later, being careful to avoid duplicates |
| 7700 | if test "$mode" = clean; then |
| 7701 | case " $rmdirs " in |
| 7702 | *" $objdir "*) ;; |
| 7703 | *) rmdirs="$rmdirs $objdir" ;; |
| 7704 | esac |
| 7705 | fi |
| 7706 | |
| 7707 | # Don't error if the file doesn't exist and rm -f was used. |
| 7708 | if { test -L "$file"; } >/dev/null 2>&1 || |
| 7709 | { test -h "$file"; } >/dev/null 2>&1 || |
| 7710 | test -f "$file"; then |
| 7711 | : |
| 7712 | elif test -d "$file"; then |
| 7713 | exit_status=1 |
| 7714 | continue |
| 7715 | elif test "$rmforce" = yes; then |
| 7716 | continue |
| 7717 | fi |
| 7718 | |
| 7719 | rmfiles="$file" |
| 7720 | |
| 7721 | case $name in |
| 7722 | *.la) |
| 7723 | # Possibly a libtool archive, so verify it. |
| 7724 | if func_lalib_p "$file"; then |
| 7725 | func_source $dir/$name |
| 7726 | |
| 7727 | # Delete the libtool libraries and symlinks. |
| 7728 | for n in $library_names; do |
| 7729 | rmfiles="$rmfiles $objdir/$n" |
| 7730 | done |
| 7731 | test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" |
| 7732 | |
| 7733 | case "$mode" in |
| 7734 | clean) |
| 7735 | case " $library_names " in |
| 7736 | # " " in the beginning catches empty $dlname |
| 7737 | *" $dlname "*) ;; |
| 7738 | *) rmfiles="$rmfiles $objdir/$dlname" ;; |
| 7739 | esac |
| 7740 | test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" |
| 7741 | ;; |
| 7742 | uninstall) |
| 7743 | if test -n "$library_names"; then |
| 7744 | # Do each command in the postuninstall commands. |
| 7745 | func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' |
| 7746 | fi |
| 7747 | |
| 7748 | if test -n "$old_library"; then |
| 7749 | # Do each command in the old_postuninstall commands. |
| 7750 | func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' |
| 7751 | fi |
| 7752 | # FIXME: should reinstall the best remaining shared library. |
| 7753 | ;; |
| 7754 | esac |
| 7755 | fi |
| 7756 | ;; |
| 7757 | |
| 7758 | *.lo) |
| 7759 | # Possibly a libtool object, so verify it. |
| 7760 | if func_lalib_p "$file"; then |
| 7761 | |
| 7762 | # Read the .lo file |
| 7763 | func_source $dir/$name |
| 7764 | |
| 7765 | # Add PIC object to the list of files to remove. |
| 7766 | if test -n "$pic_object" && |
| 7767 | test "$pic_object" != none; then |
| 7768 | rmfiles="$rmfiles $dir/$pic_object" |
| 7769 | fi |
| 7770 | |
| 7771 | # Add non-PIC object to the list of files to remove. |
| 7772 | if test -n "$non_pic_object" && |
| 7773 | test "$non_pic_object" != none; then |
| 7774 | rmfiles="$rmfiles $dir/$non_pic_object" |
| 7775 | fi |
| 7776 | fi |
| 7777 | ;; |
| 7778 | |
| 7779 | *) |
| 7780 | if test "$mode" = clean ; then |
| 7781 | noexename=$name |
| 7782 | case $file in |
| 7783 | *.exe) |
| 7784 | func_stripname '' '.exe' "$file" |
| 7785 | file=$func_stripname_result |
| 7786 | func_stripname '' '.exe' "$name" |
| 7787 | noexename=$func_stripname_result |
| 7788 | # $file with .exe has already been added to rmfiles, |
| 7789 | # add $file without .exe |
| 7790 | rmfiles="$rmfiles $file" |
| 7791 | ;; |
| 7792 | esac |
| 7793 | # Do a test to see if this is a libtool program. |
| 7794 | if func_ltwrapper_p "$file"; then |
| 7795 | if func_ltwrapper_executable_p "$file"; then |
| 7796 | func_ltwrapper_scriptname "$file" |
| 7797 | relink_command= |
| 7798 | func_source $func_ltwrapper_scriptname_result |
| 7799 | rmfiles="$rmfiles $func_ltwrapper_scriptname_result" |
| 7800 | else |
| 7801 | relink_command= |
| 7802 | func_source $dir/$noexename |
| 7803 | fi |
| 7804 | |
| 7805 | # note $name still contains .exe if it was in $file originally |
| 7806 | # as does the version of $file that was added into $rmfiles |
| 7807 | rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" |
| 7808 | if test "$fast_install" = yes && test -n "$relink_command"; then |
| 7809 | rmfiles="$rmfiles $objdir/lt-$name" |
| 7810 | fi |
| 7811 | if test "X$noexename" != "X$name" ; then |
| 7812 | rmfiles="$rmfiles $objdir/lt-${noexename}.c" |
| 7813 | fi |
| 7814 | fi |
| 7815 | fi |
| 7816 | ;; |
| 7817 | esac |
| 7818 | func_show_eval "$RM $rmfiles" 'exit_status=1' |
| 7819 | done |
| 7820 | objdir="$origobjdir" |
| 7821 | |
| 7822 | # Try to remove the ${objdir}s in the directories where we deleted files |
| 7823 | for dir in $rmdirs; do |
| 7824 | if test -d "$dir"; then |
| 7825 | func_show_eval "rmdir $dir >/dev/null 2>&1" |
| 7826 | fi |
| 7827 | done |
| 7828 | |
| 7829 | exit $exit_status |
| 7830 | } |
| 7831 | |
| 7832 | { test "$mode" = uninstall || test "$mode" = clean; } && |
| 7833 | func_mode_uninstall ${1+"$@"} |
| 7834 | |
| 7835 | test -z "$mode" && { |
| 7836 | help="$generic_help" |
| 7837 | func_fatal_help "you must specify a MODE" |
| 7838 | } |
| 7839 | |
| 7840 | test -z "$exec_cmd" && \ |
| 7841 | func_fatal_help "invalid operation mode \`$mode'" |
| 7842 | |
| 7843 | if test -n "$exec_cmd"; then |
| 7844 | eval exec "$exec_cmd" |
| 7845 | exit $EXIT_FAILURE |
| 7846 | fi |
| 7847 | |
| 7848 | exit $exit_status |
| 7849 | |
| 7850 | |
| 7851 | # The TAGs below are defined such that we never get into a situation |
| 7852 | # in which we disable both kinds of libraries. Given conflicting |
| 7853 | # choices, we go for a static library, that is the most portable, |
| 7854 | # since we can't tell whether shared libraries were disabled because |
| 7855 | # the user asked for that or because the platform doesn't support |
| 7856 | # them. This is particularly important on AIX, because we don't |
| 7857 | # support having both static and shared libraries enabled at the same |
| 7858 | # time on that platform, so we default to a shared-only configuration. |
| 7859 | # If a disable-shared tag is given, we'll fallback to a static-only |
| 7860 | # configuration. But we'll never go from static-only to shared-only. |
| 7861 | |
| 7862 | # ### BEGIN LIBTOOL TAG CONFIG: disable-shared |
| 7863 | build_libtool_libs=no |
| 7864 | build_old_libs=yes |
| 7865 | # ### END LIBTOOL TAG CONFIG: disable-shared |
| 7866 | |
| 7867 | # ### BEGIN LIBTOOL TAG CONFIG: disable-static |
| 7868 | build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` |
| 7869 | # ### END LIBTOOL TAG CONFIG: disable-static |
| 7870 | |
| 7871 | # Local Variables: |
| 7872 | # mode:shell-script |
| 7873 | # sh-indentation:2 |
| 7874 | # End: |
| 7875 | # vi:sw=2 |
| 7876 | |