| 1 | ///////////////////////////////////////////////////////////////////////////// |
| 2 | // Name: wx/msw/setup.h |
| 3 | // Purpose: Configuration for the library |
| 4 | // Author: Julian Smart |
| 5 | // Modified by: |
| 6 | // Created: 01/02/97 |
| 7 | // RCS-ID: $Id$ |
| 8 | // Copyright: (c) Julian Smart |
| 9 | // Licence: wxWindows licence |
| 10 | ///////////////////////////////////////////////////////////////////////////// |
| 11 | |
| 12 | #ifndef _WX_SETUP_H_ |
| 13 | #define _WX_SETUP_H_ |
| 14 | |
| 15 | /* --- start common options --- */ |
| 16 | // ---------------------------------------------------------------------------- |
| 17 | // global settings |
| 18 | // ---------------------------------------------------------------------------- |
| 19 | |
| 20 | // define this to 0 when building wxBase library - this can also be done from |
| 21 | // makefile/project file overriding the value here |
| 22 | #ifndef wxUSE_GUI |
| 23 | #define wxUSE_GUI 1 |
| 24 | #endif // wxUSE_GUI |
| 25 | |
| 26 | // ---------------------------------------------------------------------------- |
| 27 | // compatibility settings |
| 28 | // ---------------------------------------------------------------------------- |
| 29 | |
| 30 | // This setting determines the compatibility with 2.6 API: set it to 0 to |
| 31 | // flag all cases of using deprecated functions. |
| 32 | // |
| 33 | // Default is 1 but please try building your code with 0 as the default will |
| 34 | // change to 0 in the next version and the deprecated functions will disappear |
| 35 | // in the version after it completely. |
| 36 | // |
| 37 | // Recommended setting: 0 (please update your code) |
| 38 | #define WXWIN_COMPATIBILITY_2_6 0 |
| 39 | |
| 40 | // This setting determines the compatibility with 2.8 API: set it to 0 to |
| 41 | // flag all cases of using deprecated functions. |
| 42 | // |
| 43 | // Default is 1 but please try building your code with 0 as the default will |
| 44 | // change to 0 in the next version and the deprecated functions will disappear |
| 45 | // in the version after it completely. |
| 46 | // |
| 47 | // Recommended setting: 0 (please update your code) |
| 48 | #define WXWIN_COMPATIBILITY_2_8 1 |
| 49 | |
| 50 | // MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when |
| 51 | // default system font is used for wxWindow::GetCharWidth/Height() instead of |
| 52 | // the current font. |
| 53 | // |
| 54 | // Default is 0 |
| 55 | // |
| 56 | // Recommended setting: 0 |
| 57 | #define wxDIALOG_UNIT_COMPATIBILITY 0 |
| 58 | |
| 59 | // ---------------------------------------------------------------------------- |
| 60 | // debugging settings |
| 61 | // ---------------------------------------------------------------------------- |
| 62 | |
| 63 | // Generic comment about debugging settings: they are very useful if you don't |
| 64 | // use any other memory leak detection tools such as Purify/BoundsChecker, but |
| 65 | // are probably redundant otherwise. Also, Visual C++ CRT has the same features |
| 66 | // as wxWidgets memory debugging subsystem built in since version 5.0 and you |
| 67 | // may prefer to use it instead of built in memory debugging code because it is |
| 68 | // faster and more fool proof. |
| 69 | // |
| 70 | // Using VC++ CRT memory debugging is enabled by default in debug mode |
| 71 | // (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0) |
| 72 | // and if __NO_VC_CRTDBG__ is not defined. |
| 73 | |
| 74 | // If 1, enables wxDebugContext, for writing error messages to file, etc. If |
| 75 | // __WXDEBUG__ is not defined, will still use the normal memory operators. |
| 76 | // |
| 77 | // Default is 0 |
| 78 | // |
| 79 | // Recommended setting: 0 |
| 80 | #define wxUSE_DEBUG_CONTEXT 0 |
| 81 | |
| 82 | // If 1, enables debugging versions of wxObject::new and wxObject::delete *IF* |
| 83 | // __WXDEBUG__ is also defined. |
| 84 | // |
| 85 | // WARNING: this code may not work with all architectures, especially if |
| 86 | // alignment is an issue. This switch is currently ignored for mingw / cygwin |
| 87 | // |
| 88 | // Default is 0 |
| 89 | // |
| 90 | // Recommended setting: 1 if you are not using a memory debugging tool, else 0 |
| 91 | #define wxUSE_MEMORY_TRACING 0 |
| 92 | |
| 93 | // In debug mode, cause new and delete to be redefined globally. |
| 94 | // If this causes problems (e.g. link errors which is a common problem |
| 95 | // especially if you use another library which also redefines the global new |
| 96 | // and delete), set this to 0. |
| 97 | // This switch is currently ignored for mingw / cygwin |
| 98 | // |
| 99 | // Default is 0 |
| 100 | // |
| 101 | // Recommended setting: 0 |
| 102 | #define wxUSE_GLOBAL_MEMORY_OPERATORS 0 |
| 103 | |
| 104 | // In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If |
| 105 | // this causes problems (e.g. link errors), set this to 0. You may need to set |
| 106 | // this to 0 if using templates (at least for VC++). This switch is currently |
| 107 | // ignored for mingw / cygwin / CodeWarrior |
| 108 | // |
| 109 | // Default is 0 |
| 110 | // |
| 111 | // Recommended setting: 0 |
| 112 | #define wxUSE_DEBUG_NEW_ALWAYS 0 |
| 113 | |
| 114 | // wxHandleFatalExceptions() may be used to catch the program faults at run |
| 115 | // time and, instead of terminating the program with a usual GPF message box, |
| 116 | // call the user-defined wxApp::OnFatalException() function. If you set |
| 117 | // wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work. |
| 118 | // |
| 119 | // This setting is for Win32 only and can only be enabled if your compiler |
| 120 | // supports Win32 structured exception handling (currently only VC++ does) |
| 121 | // |
| 122 | // Default is 1 |
| 123 | // |
| 124 | // Recommended setting: 1 if your compiler supports it. |
| 125 | #define wxUSE_ON_FATAL_EXCEPTION 1 |
| 126 | |
| 127 | // Set this to 1 to be able to generate a human-readable (unlike |
| 128 | // machine-readable minidump created by wxCrashReport::Generate()) stack back |
| 129 | // trace when your program crashes using wxStackWalker |
| 130 | // |
| 131 | // Default is 1 if supported by the compiler. |
| 132 | // |
| 133 | // Recommended setting: 1, set to 0 if your programs never crash |
| 134 | #define wxUSE_STACKWALKER 1 |
| 135 | |
| 136 | // Set this to 1 to compile in wxDebugReport class which allows you to create |
| 137 | // and optionally upload to your web site a debug report consisting of back |
| 138 | // trace of the crash (if wxUSE_STACKWALKER == 1) and other information. |
| 139 | // |
| 140 | // Default is 1 if supported by the compiler. |
| 141 | // |
| 142 | // Recommended setting: 1, it is compiled into a separate library so there |
| 143 | // is no overhead if you don't use it |
| 144 | #define wxUSE_DEBUGREPORT 1 |
| 145 | |
| 146 | // ---------------------------------------------------------------------------- |
| 147 | // Unicode support |
| 148 | // ---------------------------------------------------------------------------- |
| 149 | |
| 150 | // Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be |
| 151 | // defined as wchar_t, wxString will use Unicode internally. If you set this |
| 152 | // to 1, you must use wxT() macro for all literal strings in the program. |
| 153 | // |
| 154 | // Unicode is currently only fully supported under Windows NT/2000/XP |
| 155 | // (Windows 9x doesn't support it and the programs compiled in Unicode mode |
| 156 | // will not run under 9x -- but see wxUSE_UNICODE_MSLU below). |
| 157 | // |
| 158 | // Default is 0 |
| 159 | // |
| 160 | // Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP) |
| 161 | #ifndef wxUSE_UNICODE |
| 162 | #define wxUSE_UNICODE 0 |
| 163 | #endif |
| 164 | |
| 165 | // Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without |
| 166 | // compiling the program in Unicode mode. More precisely, it will be possible |
| 167 | // to construct wxString from a wide (Unicode) string and convert any wxString |
| 168 | // to Unicode. |
| 169 | // |
| 170 | // Default is 1 |
| 171 | // |
| 172 | // Recommended setting: 1 |
| 173 | #define wxUSE_WCHAR_T 1 |
| 174 | |
| 175 | // ---------------------------------------------------------------------------- |
| 176 | // global features |
| 177 | // ---------------------------------------------------------------------------- |
| 178 | |
| 179 | // Compile library in exception-safe mode? If set to 1, the library will try to |
| 180 | // behave correctly in presence of exceptions (even though it still will not |
| 181 | // use the exceptions itself) and notify the user code about any unhandled |
| 182 | // exceptions. If set to 0, propagation of the exceptions through the library |
| 183 | // code will lead to undefined behaviour -- but the code itself will be |
| 184 | // slightly smaller and faster. |
| 185 | // |
| 186 | // Note that like wxUSE_THREADS this option is automatically set to 0 if |
| 187 | // wxNO_EXCEPTIONS is defined. |
| 188 | // |
| 189 | // Default is 1 |
| 190 | // |
| 191 | // Recommended setting: depends on whether you intend to use C++ exceptions |
| 192 | // in your own code (1 if you do, 0 if you don't) |
| 193 | #define wxUSE_EXCEPTIONS 1 |
| 194 | |
| 195 | // Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI |
| 196 | // |
| 197 | // Default is 0 |
| 198 | // |
| 199 | // Recommended setting: 0 (this is still work in progress...) |
| 200 | #define wxUSE_EXTENDED_RTTI 0 |
| 201 | |
| 202 | // Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from |
| 203 | // std::list<Foo*> and std::vector<Foo*>, with a compatibility interface, |
| 204 | // and for wxHashMap to be implemented with templates. |
| 205 | // |
| 206 | // Default is 0 |
| 207 | // |
| 208 | // Recommended setting: YMMV |
| 209 | #define wxUSE_STL 0 |
| 210 | |
| 211 | // Support for message/error logging. This includes wxLogXXX() functions and |
| 212 | // wxLog and derived classes. Don't set this to 0 unless you really know what |
| 213 | // you are doing. |
| 214 | // |
| 215 | // Default is 1 |
| 216 | // |
| 217 | // Recommended setting: 1 (always) |
| 218 | #define wxUSE_LOG 1 |
| 219 | |
| 220 | // Recommended setting: 1 |
| 221 | #define wxUSE_LOGWINDOW 1 |
| 222 | |
| 223 | // Recommended setting: 1 |
| 224 | #define wxUSE_LOGGUI 1 |
| 225 | |
| 226 | // Recommended setting: 1 |
| 227 | #define wxUSE_LOG_DIALOG 1 |
| 228 | |
| 229 | // Support for command line parsing using wxCmdLineParser class. |
| 230 | // |
| 231 | // Default is 1 |
| 232 | // |
| 233 | // Recommended setting: 1 (can be set to 0 if you don't use the cmd line) |
| 234 | #define wxUSE_CMDLINE_PARSER 1 |
| 235 | |
| 236 | // Support for multithreaded applications: if 1, compile in thread classes |
| 237 | // (thread.h) and make the library a bit more thread safe. Although thread |
| 238 | // support is quite stable by now, you may still consider recompiling the |
| 239 | // library without it if you have no use for it - this will result in a |
| 240 | // somewhat smaller and faster operation. |
| 241 | // |
| 242 | // Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset |
| 243 | // to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in |
| 244 | // build/msw/config.* file this value will have no effect. |
| 245 | // |
| 246 | // Default is 1 |
| 247 | // |
| 248 | // Recommended setting: 0 unless you do plan to develop MT applications |
| 249 | #define wxUSE_THREADS 1 |
| 250 | |
| 251 | // If enabled, compiles wxWidgets streams classes |
| 252 | // |
| 253 | // wx stream classes are used for image IO, process IO redirection, network |
| 254 | // protocols implementation and much more and so disabling this results in a |
| 255 | // lot of other functionality being lost. |
| 256 | // |
| 257 | // Default is 1 |
| 258 | // |
| 259 | // Recommended setting: 1 as setting it to 0 disables many other things |
| 260 | #define wxUSE_STREAMS 1 |
| 261 | |
| 262 | // Use standard C++ streams if 1 instead of wx streams in some places. If |
| 263 | // disabled (default), wx streams are used everywhere and wxWidgets doesn't |
| 264 | // depend on the standard streams library. |
| 265 | // |
| 266 | // Notice that enabling this does not replace wx streams with std streams |
| 267 | // everywhere, in a lot of places wx streams are used no matter what. |
| 268 | // |
| 269 | // Default is 0 |
| 270 | // |
| 271 | // Recommended setting: 1 if you use the standard streams anyhow and so |
| 272 | // dependency on the standard streams library is not a |
| 273 | // problem |
| 274 | #define wxUSE_STD_IOSTREAM 0 |
| 275 | |
| 276 | // Enable conversion to standard C++ string if 1. |
| 277 | // |
| 278 | // Default is 1 for most compilers. |
| 279 | // |
| 280 | // Currently the Digital Mars and Watcom compilers come without standard C++ |
| 281 | // library headers by default, wxUSE_STD_STRING can be set to 1 if you do have |
| 282 | // them (e.g. from STLPort). |
| 283 | // |
| 284 | // VC++ 5.0 does include standard C++ library header, however they produce |
| 285 | // many warnings that can't be turned off when compiled at warning level 4. |
| 286 | #if defined(__DMC__) || defined(__WATCOMC__) \ |
| 287 | || (defined(_MSC_VER) && _MSC_VER < 1200) |
| 288 | #define wxUSE_STD_STRING 0 |
| 289 | #else |
| 290 | #define wxUSE_STD_STRING 1 |
| 291 | #endif |
| 292 | |
| 293 | // Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf. |
| 294 | // Note that if the system's implementation does not support positional |
| 295 | // parameters, setting this to 1 forces the use of the wxWidgets implementation |
| 296 | // of wxVsnprintf. The standard vsnprintf() supports positional parameters on |
| 297 | // many Unix systems but usually doesn't under Windows. |
| 298 | // |
| 299 | // Positional parameters are very useful when translating a program since using |
| 300 | // them in formatting strings allow translators to correctly reorder the |
| 301 | // translated sentences. |
| 302 | // |
| 303 | // Default is 1 |
| 304 | // |
| 305 | // Recommended setting: 1 if you want to support multiple languages |
| 306 | #define wxUSE_PRINTF_POS_PARAMS 1 |
| 307 | |
| 308 | // ---------------------------------------------------------------------------- |
| 309 | // non GUI features selection |
| 310 | // ---------------------------------------------------------------------------- |
| 311 | |
| 312 | // Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit |
| 313 | // integer which is implemented in terms of native 64 bit integers if any or |
| 314 | // uses emulation otherwise. |
| 315 | // |
| 316 | // This class is required by wxDateTime and so you should enable it if you want |
| 317 | // to use wxDateTime. For most modern platforms, it will use the native 64 bit |
| 318 | // integers in which case (almost) all of its functions are inline and it |
| 319 | // almost does not take any space, so there should be no reason to switch it |
| 320 | // off. |
| 321 | // |
| 322 | // Recommended setting: 1 |
| 323 | #define wxUSE_LONGLONG 1 |
| 324 | |
| 325 | // Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level |
| 326 | // POSIX functions for file access, wxFFile uses ANSI C stdio.h functions. |
| 327 | // |
| 328 | // Default is 1 |
| 329 | // |
| 330 | // Recommended setting: 1 (wxFile is highly recommended as it is required by |
| 331 | // i18n code, wxFileConfig and others) |
| 332 | #define wxUSE_FILE 1 |
| 333 | #define wxUSE_FFILE 1 |
| 334 | |
| 335 | // Use wxFSVolume class providing access to the configured/active mount points |
| 336 | // |
| 337 | // Default is 1 |
| 338 | // |
| 339 | // Recommended setting: 1 (but may be safely disabled if you don't use it) |
| 340 | #define wxUSE_FSVOLUME 1 |
| 341 | |
| 342 | // Use wxStandardPaths class which allows to retrieve some standard locations |
| 343 | // in the file system |
| 344 | // |
| 345 | // Default is 1 |
| 346 | // |
| 347 | // Recommended setting: 1 (may be disabled to save space, but not much) |
| 348 | #define wxUSE_STDPATHS 1 |
| 349 | |
| 350 | // use wxTextBuffer class: required by wxTextFile |
| 351 | #define wxUSE_TEXTBUFFER 1 |
| 352 | |
| 353 | // use wxTextFile class: requires wxFile and wxTextBuffer, required by |
| 354 | // wxFileConfig |
| 355 | #define wxUSE_TEXTFILE 1 |
| 356 | |
| 357 | // i18n support: _() macro, wxLocale class. Requires wxTextFile. |
| 358 | #define wxUSE_INTL 1 |
| 359 | |
| 360 | // Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which |
| 361 | // allow to manipulate dates, times and time intervals. wxDateTime replaces the |
| 362 | // old wxTime and wxDate classes which are still provided for backwards |
| 363 | // compatibility (and implemented in terms of wxDateTime). |
| 364 | // |
| 365 | // Note that this class is relatively new and is still officially in alpha |
| 366 | // stage because some features are not yet (fully) implemented. It is already |
| 367 | // quite useful though and should only be disabled if you are aiming at |
| 368 | // absolutely minimal version of the library. |
| 369 | // |
| 370 | // Requires: wxUSE_LONGLONG |
| 371 | // |
| 372 | // Default is 1 |
| 373 | // |
| 374 | // Recommended setting: 1 |
| 375 | #define wxUSE_DATETIME 1 |
| 376 | |
| 377 | // Set wxUSE_TIMER to 1 to compile wxTimer class |
| 378 | // |
| 379 | // Default is 1 |
| 380 | // |
| 381 | // Recommended setting: 1 |
| 382 | #define wxUSE_TIMER 1 |
| 383 | |
| 384 | // Use wxStopWatch clas. |
| 385 | // |
| 386 | // Default is 1 |
| 387 | // |
| 388 | // Recommended setting: 1 (needed by wxSocket) |
| 389 | #define wxUSE_STOPWATCH 1 |
| 390 | |
| 391 | // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes |
| 392 | // which allow the application to store its settings in the persistent |
| 393 | // storage. Setting this to 1 will also enable on-demand creation of the |
| 394 | // global config object in wxApp. |
| 395 | // |
| 396 | // See also wxUSE_CONFIG_NATIVE below. |
| 397 | // |
| 398 | // Recommended setting: 1 |
| 399 | #define wxUSE_CONFIG 1 |
| 400 | |
| 401 | // If wxUSE_CONFIG is 1, you may choose to use either the native config |
| 402 | // classes under Windows (using .INI files under Win16 and the registry under |
| 403 | // Win32) or the portable text file format used by the config classes under |
| 404 | // Unix. |
| 405 | // |
| 406 | // Default is 1 to use native classes. Note that you may still use |
| 407 | // wxFileConfig even if you set this to 1 - just the config object created by |
| 408 | // default for the applications needs will be a wxRegConfig or wxIniConfig and |
| 409 | // not wxFileConfig. |
| 410 | // |
| 411 | // Recommended setting: 1 |
| 412 | #define wxUSE_CONFIG_NATIVE 1 |
| 413 | |
| 414 | // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows |
| 415 | // to connect/disconnect from the network and be notified whenever the dial-up |
| 416 | // network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER. |
| 417 | // |
| 418 | // Default is 1. |
| 419 | // |
| 420 | // Recommended setting: 1 |
| 421 | #define wxUSE_DIALUP_MANAGER 1 |
| 422 | |
| 423 | // Compile in classes for run-time DLL loading and function calling. |
| 424 | // Required by wxUSE_DIALUP_MANAGER. |
| 425 | // |
| 426 | // This setting is for Win32 only |
| 427 | // |
| 428 | // Default is 1. |
| 429 | // |
| 430 | // Recommended setting: 1 |
| 431 | #define wxUSE_DYNLIB_CLASS 1 |
| 432 | |
| 433 | // experimental, don't use for now |
| 434 | #define wxUSE_DYNAMIC_LOADER 1 |
| 435 | |
| 436 | // Set to 1 to use socket classes |
| 437 | #define wxUSE_SOCKETS 1 |
| 438 | |
| 439 | // Set to 1 to enable virtual file systems (required by wxHTML) |
| 440 | #define wxUSE_FILESYSTEM 1 |
| 441 | |
| 442 | // Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM) |
| 443 | #define wxUSE_FS_ZIP 1 |
| 444 | |
| 445 | // Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM) |
| 446 | #define wxUSE_FS_ARCHIVE 1 |
| 447 | |
| 448 | // Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM) |
| 449 | #define wxUSE_FS_INET 1 |
| 450 | |
| 451 | // wxArchive classes for accessing archives such as zip and tar |
| 452 | #define wxUSE_ARCHIVE_STREAMS 1 |
| 453 | |
| 454 | // Set to 1 to compile wxZipInput/OutputStream classes. |
| 455 | #define wxUSE_ZIPSTREAM 1 |
| 456 | |
| 457 | // Set to 1 to compile wxTarInput/OutputStream classes. |
| 458 | #define wxUSE_TARSTREAM 1 |
| 459 | |
| 460 | // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by |
| 461 | // wxUSE_LIBPNG |
| 462 | #define wxUSE_ZLIB 1 |
| 463 | |
| 464 | // If enabled, the code written by Apple will be used to write, in a portable |
| 465 | // way, float on the disk. See extended.c for the license which is different |
| 466 | // from wxWidgets one. |
| 467 | // |
| 468 | // Default is 1. |
| 469 | // |
| 470 | // Recommended setting: 1 unless you don't like the license terms (unlikely) |
| 471 | #define wxUSE_APPLE_IEEE 1 |
| 472 | |
| 473 | // Joystick support class |
| 474 | #define wxUSE_JOYSTICK 1 |
| 475 | |
| 476 | // wxFontMapper class |
| 477 | #define wxUSE_FONTMAP 1 |
| 478 | |
| 479 | // wxMimeTypesManager class |
| 480 | #define wxUSE_MIMETYPE 1 |
| 481 | |
| 482 | // wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP |
| 483 | // or wxURL you need to set this to 1. |
| 484 | // |
| 485 | // Default is 1. |
| 486 | // |
| 487 | // Recommended setting: 1 |
| 488 | #define wxUSE_PROTOCOL 1 |
| 489 | |
| 490 | // The settings for the individual URL schemes |
| 491 | #define wxUSE_PROTOCOL_FILE 1 |
| 492 | #define wxUSE_PROTOCOL_FTP 1 |
| 493 | #define wxUSE_PROTOCOL_HTTP 1 |
| 494 | |
| 495 | // Define this to use wxURL class. |
| 496 | #define wxUSE_URL 1 |
| 497 | |
| 498 | // Define this to use native platform url and protocol support. |
| 499 | // Currently valid only for MS-Windows. |
| 500 | // Note: if you set this to 1, you can open ftp/http/gopher sites |
| 501 | // and obtain a valid input stream for these sites |
| 502 | // even when you set wxUSE_PROTOCOL_FTP/HTTP to 0. |
| 503 | // Doing so reduces the code size. |
| 504 | // |
| 505 | // This code is experimental and subject to change. |
| 506 | #define wxUSE_URL_NATIVE 0 |
| 507 | |
| 508 | // Support for wxVariant class used in several places throughout the library, |
| 509 | // notably in wxDataViewCtrl API. |
| 510 | // |
| 511 | // Default is 1. |
| 512 | // |
| 513 | // Recommended setting: 1 unless you want to reduce the library size as much as |
| 514 | // possible in which case setting this to 0 can gain up to 100KB. |
| 515 | #define wxUSE_VARIANT 1 |
| 516 | |
| 517 | // Support for regular expression matching via wxRegEx class: enable this to |
| 518 | // use POSIX regular expressions in your code. You need to compile regex |
| 519 | // library from src/regex to use it under Windows. |
| 520 | // |
| 521 | // Default is 0 |
| 522 | // |
| 523 | // Recommended setting: 1 if your compiler supports it, if it doesn't please |
| 524 | // contribute us a makefile for src/regex for it |
| 525 | #define wxUSE_REGEX 1 |
| 526 | |
| 527 | // wxSystemOptions class |
| 528 | #define wxUSE_SYSTEM_OPTIONS 1 |
| 529 | |
| 530 | // wxSound class |
| 531 | #define wxUSE_SOUND 1 |
| 532 | |
| 533 | // Use wxMediaCtrl |
| 534 | // |
| 535 | // Default is 1. |
| 536 | // |
| 537 | // Recommended setting: 1 |
| 538 | #define wxUSE_MEDIACTRL 1 |
| 539 | |
| 540 | // Use GStreamer for Unix (req a lot of dependancies) |
| 541 | // |
| 542 | // Default is 0 |
| 543 | // |
| 544 | // Recommended setting: 1 (wxMediaCtrl won't work by default without it) |
| 545 | #define wxUSE_GSTREAMER 0 |
| 546 | |
| 547 | // Use wxWidget's XRC XML-based resource system. Recommended. |
| 548 | // |
| 549 | // Default is 1 |
| 550 | // |
| 551 | // Recommended setting: 1 (requires wxUSE_XML) |
| 552 | #define wxUSE_XRC 1 |
| 553 | |
| 554 | // XML parsing classes. Note that their API will change in the future, so |
| 555 | // using wxXmlDocument and wxXmlNode in your app is not recommended. |
| 556 | // |
| 557 | // Default is the same as wxUSE_XRC, i.e. 1 by default. |
| 558 | // |
| 559 | // Recommended setting: 1 (required by XRC) |
| 560 | #define wxUSE_XML wxUSE_XRC |
| 561 | |
| 562 | // Use wxWidget's AUI docking system |
| 563 | // |
| 564 | // Default is 1 |
| 565 | // |
| 566 | // Recommended setting: 1 |
| 567 | #define wxUSE_AUI 1 |
| 568 | |
| 569 | // Use wxStyledTextCtrl, a wxWidgets implementation of Scintilla. |
| 570 | // |
| 571 | // Default is 1 |
| 572 | // |
| 573 | // Recommended setting: 1 |
| 574 | #define wxUSE_STC 1 |
| 575 | |
| 576 | |
| 577 | // Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced |
| 578 | // 2D drawing API. (Still somewhat experimental) |
| 579 | // |
| 580 | // Please note that on Windows you will need to link with gdiplus.lib (use |
| 581 | // USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your |
| 582 | // application if you want it to be runnable on pre-XP systems. |
| 583 | // |
| 584 | // Default is 0 |
| 585 | // |
| 586 | // Recommended setting: 1 |
| 587 | #ifndef wxUSE_GRAPHICS_CONTEXT |
| 588 | #define wxUSE_GRAPHICS_CONTEXT 0 |
| 589 | #endif |
| 590 | |
| 591 | // ---------------------------------------------------------------------------- |
| 592 | // Individual GUI controls |
| 593 | // ---------------------------------------------------------------------------- |
| 594 | |
| 595 | // You must set wxUSE_CONTROLS to 1 if you are using any controls at all |
| 596 | // (without it, wxControl class is not compiled) |
| 597 | // |
| 598 | // Default is 1 |
| 599 | // |
| 600 | // Recommended setting: 1 (don't change except for very special programs) |
| 601 | #define wxUSE_CONTROLS 1 |
| 602 | |
| 603 | // wxPopupWindow class is a top level transient window. It is currently used |
| 604 | // to implement wxTipWindow |
| 605 | // |
| 606 | // Default is 1 |
| 607 | // |
| 608 | // Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW) |
| 609 | #define wxUSE_POPUPWIN 1 |
| 610 | |
| 611 | // wxTipWindow allows to implement the custom tooltips, it is used by the |
| 612 | // context help classes. Requires wxUSE_POPUPWIN. |
| 613 | // |
| 614 | // Default is 1 |
| 615 | // |
| 616 | // Recommended setting: 1 (may be set to 0) |
| 617 | #define wxUSE_TIPWINDOW 1 |
| 618 | |
| 619 | // Each of the settings below corresponds to one wxWidgets control. They are |
| 620 | // all switched on by default but may be disabled if you are sure that your |
| 621 | // program (including any standard dialogs it can show!) doesn't need them and |
| 622 | // if you desperately want to save some space. If you use any of these you must |
| 623 | // set wxUSE_CONTROLS as well. |
| 624 | // |
| 625 | // Default is 1 |
| 626 | // |
| 627 | // Recommended setting: 1 |
| 628 | #define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl |
| 629 | #define wxUSE_BUTTON 1 // wxButton |
| 630 | #define wxUSE_BMPBUTTON 1 // wxBitmapButton |
| 631 | #define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl |
| 632 | #define wxUSE_CHECKBOX 1 // wxCheckBox |
| 633 | #define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN) |
| 634 | #define wxUSE_CHOICE 1 // wxChoice |
| 635 | #define wxUSE_COLLPANE 1 // wxCollapsiblePane |
| 636 | #define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl |
| 637 | #define wxUSE_COMBOBOX 1 // wxComboBox |
| 638 | #define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl |
| 639 | #define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl |
| 640 | #define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl |
| 641 | #define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl |
| 642 | #define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl |
| 643 | #define wxUSE_GAUGE 1 // wxGauge |
| 644 | #define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl |
| 645 | #define wxUSE_LISTBOX 1 // wxListBox |
| 646 | #define wxUSE_LISTCTRL 1 // wxListCtrl |
| 647 | #define wxUSE_RADIOBOX 1 // wxRadioBox |
| 648 | #define wxUSE_RADIOBTN 1 // wxRadioButton |
| 649 | #define wxUSE_SCROLLBAR 1 // wxScrollBar |
| 650 | #define wxUSE_SEARCHCTRL 1 // wxSearchCtrl |
| 651 | #define wxUSE_SLIDER 1 // wxSlider |
| 652 | #define wxUSE_SPINBTN 1 // wxSpinButton |
| 653 | #define wxUSE_SPINCTRL 1 // wxSpinCtrl |
| 654 | #define wxUSE_STATBOX 1 // wxStaticBox |
| 655 | #define wxUSE_STATLINE 1 // wxStaticLine |
| 656 | #define wxUSE_STATTEXT 1 // wxStaticText |
| 657 | #define wxUSE_STATBMP 1 // wxStaticBitmap |
| 658 | #define wxUSE_TEXTCTRL 1 // wxTextCtrl |
| 659 | #define wxUSE_TOGGLEBTN 1 // requires wxButton |
| 660 | #define wxUSE_TREECTRL 1 // wxTreeCtrl |
| 661 | |
| 662 | // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR |
| 663 | // below either wxStatusBar95 or a generic wxStatusBar will be used. |
| 664 | // |
| 665 | // Default is 1 |
| 666 | // |
| 667 | // Recommended setting: 1 |
| 668 | #define wxUSE_STATUSBAR 1 |
| 669 | |
| 670 | // Two status bar implementations are available under Win32: the generic one |
| 671 | // or the wrapper around native control. For native look and feel the native |
| 672 | // version should be used. |
| 673 | // |
| 674 | // Default is 1 for the platforms where native status bar is supported. |
| 675 | // |
| 676 | // Recommended setting: 1 (there is no advantage in using the generic one) |
| 677 | #define wxUSE_NATIVE_STATUSBAR 1 |
| 678 | |
| 679 | // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar |
| 680 | // classes at all. Otherwise, use the native toolbar class unless |
| 681 | // wxUSE_TOOLBAR_NATIVE is 0. |
| 682 | // |
| 683 | // Default is 1 for all settings. |
| 684 | // |
| 685 | // Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE. |
| 686 | #define wxUSE_TOOLBAR 1 |
| 687 | #define wxUSE_TOOLBAR_NATIVE 1 |
| 688 | |
| 689 | // wxNotebook is a control with several "tabs" located on one of its sides. It |
| 690 | // may be used to logically organise the data presented to the user instead of |
| 691 | // putting everything in one huge dialog. It replaces wxTabControl and related |
| 692 | // classes of wxWin 1.6x. |
| 693 | // |
| 694 | // Default is 1. |
| 695 | // |
| 696 | // Recommended setting: 1 |
| 697 | #define wxUSE_NOTEBOOK 1 |
| 698 | |
| 699 | // wxListbook control is similar to wxNotebook but uses wxListCtrl instead of |
| 700 | // the tabs |
| 701 | // |
| 702 | // Default is 1. |
| 703 | // |
| 704 | // Recommended setting: 1 |
| 705 | #define wxUSE_LISTBOOK 1 |
| 706 | |
| 707 | // wxChoicebook control is similar to wxNotebook but uses wxChoice instead of |
| 708 | // the tabs |
| 709 | // |
| 710 | // Default is 1. |
| 711 | // |
| 712 | // Recommended setting: 1 |
| 713 | #define wxUSE_CHOICEBOOK 1 |
| 714 | |
| 715 | // wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of |
| 716 | // the tabs |
| 717 | // |
| 718 | // Default is 1. |
| 719 | // |
| 720 | // Recommended setting: 1 |
| 721 | #define wxUSE_TREEBOOK 1 |
| 722 | |
| 723 | // wxToolbook control is similar to wxNotebook but uses wxToolBar instead of |
| 724 | // tabs |
| 725 | // |
| 726 | // Default is 1. |
| 727 | // |
| 728 | // Recommended setting: 1 |
| 729 | #define wxUSE_TOOLBOOK 1 |
| 730 | |
| 731 | // wxTabDialog is a generic version of wxNotebook but it is incompatible with |
| 732 | // the new class. It shouldn't be used in new code. |
| 733 | // |
| 734 | // Default is 0. |
| 735 | // |
| 736 | // Recommended setting: 0 (use wxNotebook) |
| 737 | #define wxUSE_TAB_DIALOG 0 |
| 738 | |
| 739 | // wxGrid class |
| 740 | // |
| 741 | // Default is 1, set to 0 to cut down compilation time and binaries size if you |
| 742 | // don't use it. |
| 743 | // |
| 744 | // Recommended setting: 1 |
| 745 | // |
| 746 | #define wxUSE_GRID 1 |
| 747 | |
| 748 | // wxMiniFrame class: a frame with narrow title bar |
| 749 | // |
| 750 | // Default is 1. |
| 751 | // |
| 752 | // Recommended setting: 1 (it doesn't cost almost anything) |
| 753 | #define wxUSE_MINIFRAME 1 |
| 754 | |
| 755 | // wxComboCtrl and related classes: combobox with custom popup window and |
| 756 | // not necessarily a listbox. |
| 757 | // |
| 758 | // Default is 1. |
| 759 | // |
| 760 | // Recommended setting: 1 but can be safely set to 0 except for wxUniv where it |
| 761 | // it used by wxComboBox |
| 762 | #define wxUSE_COMBOCTRL 1 |
| 763 | |
| 764 | // wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox |
| 765 | // items. |
| 766 | // |
| 767 | // Default is 1. |
| 768 | // |
| 769 | // Recommended setting: 1 but can be safely set to 0, except where it is |
| 770 | // needed as a base class for generic wxBitmapComboBox. |
| 771 | #define wxUSE_ODCOMBOBOX 1 |
| 772 | |
| 773 | // wxBitmapComboBox is a combobox that can have images in front of text items. |
| 774 | // |
| 775 | // Default is 1. |
| 776 | // |
| 777 | // Recommended setting: 1 but can be safely set to 0 |
| 778 | #define wxUSE_BITMAPCOMBOBOX 1 |
| 779 | |
| 780 | // ---------------------------------------------------------------------------- |
| 781 | // Miscellaneous GUI stuff |
| 782 | // ---------------------------------------------------------------------------- |
| 783 | |
| 784 | // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar) |
| 785 | #define wxUSE_ACCEL 1 |
| 786 | |
| 787 | // Hotkey support (currently Windows only) |
| 788 | #define wxUSE_HOTKEY 1 |
| 789 | |
| 790 | // Use wxCaret: a class implementing a "cursor" in a text control (called caret |
| 791 | // under Windows). |
| 792 | // |
| 793 | // Default is 1. |
| 794 | // |
| 795 | // Recommended setting: 1 (can be safely set to 0, not used by the library) |
| 796 | #define wxUSE_CARET 1 |
| 797 | |
| 798 | // Use wxDisplay class: it allows enumerating all displays on a system and |
| 799 | // their geometries as well as finding the display on which the given point or |
| 800 | // window lies. |
| 801 | // |
| 802 | // Default is 1. |
| 803 | // |
| 804 | // Recommended setting: 1 if you need it, can be safely set to 0 otherwise |
| 805 | #define wxUSE_DISPLAY 1 |
| 806 | |
| 807 | // Miscellaneous geometry code: needed for Canvas library |
| 808 | #define wxUSE_GEOMETRY 1 |
| 809 | |
| 810 | // Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and |
| 811 | // wxListCtrl. |
| 812 | // |
| 813 | // Default is 1. |
| 814 | // |
| 815 | // Recommended setting: 1 (set it to 0 if you don't use any of the controls |
| 816 | // enumerated above, then this class is mostly useless too) |
| 817 | #define wxUSE_IMAGLIST 1 |
| 818 | |
| 819 | // Use wxMenu, wxMenuBar, wxMenuItem. |
| 820 | // |
| 821 | // Default is 1. |
| 822 | // |
| 823 | // Recommended setting: 1 (can't be disabled under MSW) |
| 824 | #define wxUSE_MENUS 1 |
| 825 | |
| 826 | // Use wxSashWindow class. |
| 827 | // |
| 828 | // Default is 1. |
| 829 | // |
| 830 | // Recommended setting: 1 |
| 831 | #define wxUSE_SASH 1 |
| 832 | |
| 833 | // Use wxSplitterWindow class. |
| 834 | // |
| 835 | // Default is 1. |
| 836 | // |
| 837 | // Recommended setting: 1 |
| 838 | #define wxUSE_SPLITTER 1 |
| 839 | |
| 840 | // Use wxToolTip and wxWindow::Set/GetToolTip() methods. |
| 841 | // |
| 842 | // Default is 1. |
| 843 | // |
| 844 | // Recommended setting: 1 |
| 845 | #define wxUSE_TOOLTIPS 1 |
| 846 | |
| 847 | // wxValidator class and related methods |
| 848 | #define wxUSE_VALIDATORS 1 |
| 849 | |
| 850 | // ---------------------------------------------------------------------------- |
| 851 | // common dialogs |
| 852 | // ---------------------------------------------------------------------------- |
| 853 | |
| 854 | // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g. |
| 855 | // file selector, printer dialog). Switching this off also switches off the |
| 856 | // printing architecture and interactive wxPrinterDC. |
| 857 | // |
| 858 | // Default is 1 |
| 859 | // |
| 860 | // Recommended setting: 1 (unless it really doesn't work) |
| 861 | #define wxUSE_COMMON_DIALOGS 1 |
| 862 | |
| 863 | // wxBusyInfo displays window with message when app is busy. Works in same way |
| 864 | // as wxBusyCursor |
| 865 | #define wxUSE_BUSYINFO 1 |
| 866 | |
| 867 | // Use single/multiple choice dialogs. |
| 868 | // |
| 869 | // Default is 1 |
| 870 | // |
| 871 | // Recommended setting: 1 (used in the library itself) |
| 872 | #define wxUSE_CHOICEDLG 1 |
| 873 | |
| 874 | // Use colour picker dialog |
| 875 | // |
| 876 | // Default is 1 |
| 877 | // |
| 878 | // Recommended setting: 1 |
| 879 | #define wxUSE_COLOURDLG 1 |
| 880 | |
| 881 | // wxDirDlg class for getting a directory name from user |
| 882 | #define wxUSE_DIRDLG 1 |
| 883 | |
| 884 | // TODO: setting to choose the generic or native one |
| 885 | |
| 886 | // Use file open/save dialogs. |
| 887 | // |
| 888 | // Default is 1 |
| 889 | // |
| 890 | // Recommended setting: 1 (used in many places in the library itself) |
| 891 | #define wxUSE_FILEDLG 1 |
| 892 | |
| 893 | // Use find/replace dialogs. |
| 894 | // |
| 895 | // Default is 1 |
| 896 | // |
| 897 | // Recommended setting: 1 (but may be safely set to 0) |
| 898 | #define wxUSE_FINDREPLDLG 1 |
| 899 | |
| 900 | // Use font picker dialog |
| 901 | // |
| 902 | // Default is 1 |
| 903 | // |
| 904 | // Recommended setting: 1 (used in the library itself) |
| 905 | #define wxUSE_FONTDLG 1 |
| 906 | |
| 907 | // Use wxMessageDialog and wxMessageBox. |
| 908 | // |
| 909 | // Default is 1 |
| 910 | // |
| 911 | // Recommended setting: 1 (used in the library itself) |
| 912 | #define wxUSE_MSGDLG 1 |
| 913 | |
| 914 | // progress dialog class for lengthy operations |
| 915 | #define wxUSE_PROGRESSDLG 1 |
| 916 | |
| 917 | // support for startup tips (wxShowTip &c) |
| 918 | #define wxUSE_STARTUP_TIPS 1 |
| 919 | |
| 920 | // text entry dialog and wxGetTextFromUser function |
| 921 | #define wxUSE_TEXTDLG 1 |
| 922 | |
| 923 | // number entry dialog |
| 924 | #define wxUSE_NUMBERDLG 1 |
| 925 | |
| 926 | // splash screen class |
| 927 | #define wxUSE_SPLASH 1 |
| 928 | |
| 929 | // wizards |
| 930 | #define wxUSE_WIZARDDLG 1 |
| 931 | |
| 932 | // Compile in wxAboutBox() function showing the standard "About" dialog. |
| 933 | // |
| 934 | // Default is 1 |
| 935 | // |
| 936 | // Recommended setting: 1 but can be set to 0 to save some space if you don't |
| 937 | // use this function |
| 938 | #define wxUSE_ABOUTDLG 1 |
| 939 | |
| 940 | // ---------------------------------------------------------------------------- |
| 941 | // Metafiles support |
| 942 | // ---------------------------------------------------------------------------- |
| 943 | |
| 944 | // Windows supports the graphics format known as metafile which is, though not |
| 945 | // portable, is widely used under Windows and so is supported by wxWin (under |
| 946 | // Windows only, of course). Win16 (Win3.1) used the so-called "Window |
| 947 | // MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in |
| 948 | // Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by |
| 949 | // default, WMFs will be used under Win16 and EMFs under Win32. This may be |
| 950 | // changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting |
| 951 | // wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile |
| 952 | // in any metafile related classes at all. |
| 953 | // |
| 954 | // Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS. |
| 955 | // |
| 956 | // Recommended setting: default or 0 for everything for portable programs. |
| 957 | #define wxUSE_METAFILE 1 |
| 958 | #define wxUSE_ENH_METAFILE 1 |
| 959 | #define wxUSE_WIN_METAFILES_ALWAYS 0 |
| 960 | |
| 961 | // ---------------------------------------------------------------------------- |
| 962 | // Big GUI components |
| 963 | // ---------------------------------------------------------------------------- |
| 964 | |
| 965 | // Set to 0 to disable MDI support. |
| 966 | // |
| 967 | // Requires wxUSE_NOTEBOOK under platforms other than MSW. |
| 968 | // |
| 969 | // Default is 1. |
| 970 | // |
| 971 | // Recommended setting: 1, can be safely set to 0. |
| 972 | #define wxUSE_MDI 1 |
| 973 | |
| 974 | // Set to 0 to disable document/view architecture |
| 975 | #define wxUSE_DOC_VIEW_ARCHITECTURE 1 |
| 976 | |
| 977 | // Set to 0 to disable MDI document/view architecture |
| 978 | // |
| 979 | // Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE |
| 980 | #define wxUSE_MDI_ARCHITECTURE 1 |
| 981 | |
| 982 | // Set to 0 to disable print/preview architecture code |
| 983 | #define wxUSE_PRINTING_ARCHITECTURE 1 |
| 984 | |
| 985 | // wxHTML sublibrary allows to display HTML in wxWindow programs and much, |
| 986 | // much more. |
| 987 | // |
| 988 | // Default is 1. |
| 989 | // |
| 990 | // Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a |
| 991 | // smaller library. |
| 992 | #define wxUSE_HTML 1 |
| 993 | |
| 994 | // Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL |
| 995 | // headers and libraries to be able to compile the library with wxUSE_GLCANVAS |
| 996 | // set to 1. Note that for some compilers (notably Microsoft Visual C++) you |
| 997 | // will need to manually add opengl32.lib and glu32.lib to the list of |
| 998 | // libraries linked with your program if you use OpenGL. |
| 999 | // |
| 1000 | // Default is 0. |
| 1001 | // |
| 1002 | // Recommended setting: 1 if you intend to use OpenGL, 0 otherwise |
| 1003 | #define wxUSE_GLCANVAS 0 |
| 1004 | |
| 1005 | // wxRichTextCtrl allows editing of styled text. |
| 1006 | // |
| 1007 | // Default is 1. |
| 1008 | // |
| 1009 | // Recommended setting: 1, set to 0 if you want compile a |
| 1010 | // smaller library. |
| 1011 | #define wxUSE_RICHTEXT 1 |
| 1012 | |
| 1013 | // ---------------------------------------------------------------------------- |
| 1014 | // Data transfer |
| 1015 | // ---------------------------------------------------------------------------- |
| 1016 | |
| 1017 | // Use wxClipboard class for clipboard copy/paste. |
| 1018 | // |
| 1019 | // Default is 1. |
| 1020 | // |
| 1021 | // Recommended setting: 1 |
| 1022 | #define wxUSE_CLIPBOARD 1 |
| 1023 | |
| 1024 | // Use wxDataObject and related classes. Needed for clipboard and OLE drag and |
| 1025 | // drop |
| 1026 | // |
| 1027 | // Default is 1. |
| 1028 | // |
| 1029 | // Recommended setting: 1 |
| 1030 | #define wxUSE_DATAOBJ 1 |
| 1031 | |
| 1032 | // Use wxDropTarget and wxDropSource classes for drag and drop (this is |
| 1033 | // different from "built in" drag and drop in wxTreeCtrl which is always |
| 1034 | // available). Requires wxUSE_DATAOBJ. |
| 1035 | // |
| 1036 | // Default is 1. |
| 1037 | // |
| 1038 | // Recommended setting: 1 |
| 1039 | #define wxUSE_DRAG_AND_DROP 1 |
| 1040 | |
| 1041 | // Use wxAccessible for enhanced and customisable accessibility. |
| 1042 | // Depends on wxUSE_OLE. |
| 1043 | // |
| 1044 | // Default is 0. |
| 1045 | // |
| 1046 | // Recommended setting (at present): 0 |
| 1047 | #define wxUSE_ACCESSIBILITY 0 |
| 1048 | |
| 1049 | // ---------------------------------------------------------------------------- |
| 1050 | // miscellaneous settings |
| 1051 | // ---------------------------------------------------------------------------- |
| 1052 | |
| 1053 | // wxSingleInstanceChecker class allows to verify at startup if another program |
| 1054 | // instance is running (it is only available under Win32) |
| 1055 | // |
| 1056 | // Default is 1 |
| 1057 | // |
| 1058 | // Recommended setting: 1 (the class is tiny, disabling it won't save much |
| 1059 | // space) |
| 1060 | #define wxUSE_SNGLINST_CHECKER 1 |
| 1061 | |
| 1062 | #define wxUSE_DRAGIMAGE 1 |
| 1063 | |
| 1064 | #define wxUSE_IPC 1 |
| 1065 | // 0 for no interprocess comms |
| 1066 | #define wxUSE_HELP 1 |
| 1067 | // 0 for no help facility |
| 1068 | |
| 1069 | // Should we use MS HTML help for wxHelpController? If disabled, neither |
| 1070 | // wxCHMHelpController nor wxBestHelpController are available. |
| 1071 | // |
| 1072 | // Default is 1 under MSW, 0 is always used for the other platforms. |
| 1073 | // |
| 1074 | // Recommended setting: 1, only set to 0 if you have trouble compiling |
| 1075 | // wxCHMHelpController (could be a problem with really ancient compilers) |
| 1076 | #define wxUSE_MS_HTML_HELP 1 |
| 1077 | |
| 1078 | |
| 1079 | // Use wxHTML-based help controller? |
| 1080 | #define wxUSE_WXHTML_HELP 1 |
| 1081 | |
| 1082 | #define wxUSE_CONSTRAINTS 1 |
| 1083 | // 0 for no window layout constraint system |
| 1084 | |
| 1085 | #define wxUSE_SPLINES 1 |
| 1086 | // 0 for no splines |
| 1087 | |
| 1088 | #define wxUSE_MOUSEWHEEL 1 |
| 1089 | // Include mouse wheel support |
| 1090 | |
| 1091 | // ---------------------------------------------------------------------------- |
| 1092 | // postscript support settings |
| 1093 | // ---------------------------------------------------------------------------- |
| 1094 | |
| 1095 | // Set to 1 for PostScript device context. |
| 1096 | #define wxUSE_POSTSCRIPT 0 |
| 1097 | |
| 1098 | // Set to 1 to use font metric files in GetTextExtent |
| 1099 | #define wxUSE_AFM_FOR_POSTSCRIPT 1 |
| 1100 | |
| 1101 | // ---------------------------------------------------------------------------- |
| 1102 | // database classes |
| 1103 | // ---------------------------------------------------------------------------- |
| 1104 | |
| 1105 | // Define 1 to use ODBC classes |
| 1106 | #define wxUSE_ODBC 0 |
| 1107 | |
| 1108 | // For backward compatibility reasons, this parameter now only controls the |
| 1109 | // default scrolling method used by cursors. This default behavior can be |
| 1110 | // overriden by setting the second param of wxDB::wxDbGetConnection() or |
| 1111 | // wxDb() constructor to indicate whether the connection (and any wxDbTable()s |
| 1112 | // that use the connection) should support forward only scrolling of cursors, |
| 1113 | // or both forward and backward support for backward scrolling cursors is |
| 1114 | // dependent on the data source as well as the ODBC driver being used. |
| 1115 | #define wxODBC_FWD_ONLY_CURSORS 1 |
| 1116 | |
| 1117 | // Default is 0. Set to 1 to use the deprecated classes, enum types, function, |
| 1118 | // member variables. With a setting of 1, full backward compatibility with the |
| 1119 | // 2.0.x release is possible. It is STRONGLY recommended that this be set to 0, |
| 1120 | // as future development will be done only on the non-deprecated |
| 1121 | // functions/classes/member variables/etc. |
| 1122 | #define wxODBC_BACKWARD_COMPATABILITY 0 |
| 1123 | |
| 1124 | // ---------------------------------------------------------------------------- |
| 1125 | // other compiler (mis)features |
| 1126 | // ---------------------------------------------------------------------------- |
| 1127 | |
| 1128 | // Set this to 0 if your compiler can't cope with omission of prototype |
| 1129 | // parameters. |
| 1130 | // |
| 1131 | // Default is 1. |
| 1132 | // |
| 1133 | // Recommended setting: 1 (should never need to set this to 0) |
| 1134 | #define REMOVE_UNUSED_ARG 1 |
| 1135 | |
| 1136 | // VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix |
| 1137 | // them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1 |
| 1138 | // and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be |
| 1139 | // used anyhow. |
| 1140 | // |
| 1141 | // Default is 1. |
| 1142 | // |
| 1143 | // Recommended setting: whatever your compiler likes more |
| 1144 | #define wxUSE_IOSTREAMH 1 |
| 1145 | |
| 1146 | // ---------------------------------------------------------------------------- |
| 1147 | // image format support |
| 1148 | // ---------------------------------------------------------------------------- |
| 1149 | |
| 1150 | // wxImage supports many different image formats which can be configured at |
| 1151 | // compile-time. BMP is always supported, others are optional and can be safely |
| 1152 | // disabled if you don't plan to use images in such format sometimes saving |
| 1153 | // substantial amount of code in the final library. |
| 1154 | // |
| 1155 | // Some formats require an extra library which is included in wxWin sources |
| 1156 | // which is mentioned if it is the case. |
| 1157 | |
| 1158 | // Set to 1 for wxImage support (recommended). |
| 1159 | #define wxUSE_IMAGE 1 |
| 1160 | |
| 1161 | // Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB. |
| 1162 | #define wxUSE_LIBPNG 1 |
| 1163 | |
| 1164 | // Set to 1 for JPEG format support (requires libjpeg) |
| 1165 | #define wxUSE_LIBJPEG 1 |
| 1166 | |
| 1167 | // Set to 1 for TIFF format support (requires libtiff) |
| 1168 | #define wxUSE_LIBTIFF 1 |
| 1169 | |
| 1170 | // Set to 1 for TGA format support (loading only) |
| 1171 | #define wxUSE_TGA 1 |
| 1172 | |
| 1173 | // Set to 1 for GIF format support |
| 1174 | #define wxUSE_GIF 1 |
| 1175 | |
| 1176 | // Set to 1 for PNM format support |
| 1177 | #define wxUSE_PNM 1 |
| 1178 | |
| 1179 | // Set to 1 for PCX format support |
| 1180 | #define wxUSE_PCX 1 |
| 1181 | |
| 1182 | // Set to 1 for IFF format support (Amiga format) |
| 1183 | #define wxUSE_IFF 0 |
| 1184 | |
| 1185 | // Set to 1 for XPM format support |
| 1186 | #define wxUSE_XPM 1 |
| 1187 | |
| 1188 | // Set to 1 for MS Icons and Cursors format support |
| 1189 | #define wxUSE_ICO_CUR 1 |
| 1190 | |
| 1191 | // Set to 1 to compile in wxPalette class |
| 1192 | #define wxUSE_PALETTE 1 |
| 1193 | |
| 1194 | // ---------------------------------------------------------------------------- |
| 1195 | // wxUniversal-only options |
| 1196 | // ---------------------------------------------------------------------------- |
| 1197 | |
| 1198 | // Set to 1 to enable compilation of all themes, this is the default |
| 1199 | #define wxUSE_ALL_THEMES 1 |
| 1200 | |
| 1201 | // Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES |
| 1202 | // is unset, if it is set these options are not used; notice that metal theme |
| 1203 | // uses Win32 one |
| 1204 | #define wxUSE_THEME_GTK 0 |
| 1205 | #define wxUSE_THEME_METAL 0 |
| 1206 | #define wxUSE_THEME_MONO 0 |
| 1207 | #define wxUSE_THEME_WIN32 0 |
| 1208 | |
| 1209 | |
| 1210 | /* --- end common options --- */ |
| 1211 | |
| 1212 | // ---------------------------------------------------------------------------- |
| 1213 | // Windows-only settings |
| 1214 | // ---------------------------------------------------------------------------- |
| 1215 | |
| 1216 | // Set wxUSE_UNICODE_MSLU to 1 if you're compiling wxWidgets in Unicode mode |
| 1217 | // and want to run your programs under Windows 9x and not only NT/2000/XP. |
| 1218 | // This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see |
| 1219 | // http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note |
| 1220 | // that you will have to modify the makefiles to include unicows.lib import |
| 1221 | // library as the first library (see installation instructions in install.txt |
| 1222 | // to learn how to do it when building the library or samples). |
| 1223 | // |
| 1224 | // If your compiler doesn't have unicows.lib, you can get a version of it at |
| 1225 | // http://libunicows.sourceforge.net |
| 1226 | // |
| 1227 | // Default is 0 |
| 1228 | // |
| 1229 | // Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems) |
| 1230 | #ifndef wxUSE_UNICODE_MSLU |
| 1231 | #define wxUSE_UNICODE_MSLU 0 |
| 1232 | #endif |
| 1233 | |
| 1234 | // Set this to 1 if you want to use wxWidgets and MFC in the same program. This |
| 1235 | // will override some other settings (see below) |
| 1236 | // |
| 1237 | // Default is 0. |
| 1238 | // |
| 1239 | // Recommended setting: 0 unless you really have to use MFC |
| 1240 | #define wxUSE_MFC 0 |
| 1241 | |
| 1242 | // Set this to 1 for generic OLE support: this is required for drag-and-drop, |
| 1243 | // clipboard, OLE Automation. Only set it to 0 if your compiler is very old and |
| 1244 | // can't compile/doesn't have the OLE headers. |
| 1245 | // |
| 1246 | // Default is 1. |
| 1247 | // |
| 1248 | // Recommended setting: 1 |
| 1249 | #define wxUSE_OLE 1 |
| 1250 | |
| 1251 | // Set this to 1 to enable wxAutomationObject class. |
| 1252 | // |
| 1253 | // Default is 1. |
| 1254 | // |
| 1255 | // Recommended setting: 1 if you need to control other applications via OLE |
| 1256 | // Automation, can be safely set to 0 otherwise |
| 1257 | #define wxUSE_OLE_AUTOMATION 1 |
| 1258 | |
| 1259 | // Set this to 1 to enable wxActiveXContainer class allowing to embed OLE |
| 1260 | // controls in wx. |
| 1261 | // |
| 1262 | // Default is 1. |
| 1263 | // |
| 1264 | // Recommended setting: 1, required by wxMediaCtrl |
| 1265 | #define wxUSE_ACTIVEX 1 |
| 1266 | |
| 1267 | // wxDC cacheing implementation |
| 1268 | #define wxUSE_DC_CACHEING 1 |
| 1269 | |
| 1270 | // Set this to 1 to enable wxDIB class used internally for manipulating |
| 1271 | // wxBitmao data. |
| 1272 | // |
| 1273 | // Default is 1, set it to 0 only if you don't use wxImage neither |
| 1274 | // |
| 1275 | // Recommended setting: 1 (without it conversion to/from wxImage won't work) |
| 1276 | #define wxUSE_WXDIB 1 |
| 1277 | |
| 1278 | // Set to 0 to disable PostScript print/preview architecture code under Windows |
| 1279 | // (just use Windows printing). |
| 1280 | #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1 |
| 1281 | |
| 1282 | // Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH |
| 1283 | // which allows to put more than ~32Kb of text in it even under Win9x (NT |
| 1284 | // doesn't have such limitation). |
| 1285 | // |
| 1286 | // Default is 1 for compilers which support it |
| 1287 | // |
| 1288 | // Recommended setting: 1, only set it to 0 if your compiler doesn't have |
| 1289 | // or can't compile <richedit.h> |
| 1290 | #define wxUSE_RICHEDIT 1 |
| 1291 | |
| 1292 | // Set this to 1 to use extra features of richedit v2 and later controls |
| 1293 | // |
| 1294 | // Default is 1 for compilers which support it |
| 1295 | // |
| 1296 | // Recommended setting: 1 |
| 1297 | #define wxUSE_RICHEDIT2 1 |
| 1298 | |
| 1299 | // Set this to 1 to enable support for the owner-drawn menu and listboxes. This |
| 1300 | // is required by wxUSE_CHECKLISTBOX. |
| 1301 | // |
| 1302 | // Default is 1. |
| 1303 | // |
| 1304 | // Recommended setting: 1, set to 0 for a small library size reduction |
| 1305 | #define wxUSE_OWNER_DRAWN 1 |
| 1306 | |
| 1307 | // Set to 1 to compile MS Windows XP theme engine support |
| 1308 | #define wxUSE_UXTHEME 1 |
| 1309 | |
| 1310 | // Set to 1 to auto-adapt to MS Windows XP themes where possible |
| 1311 | // (notably, wxNotebook pages) |
| 1312 | #define wxUSE_UXTHEME_AUTO 1 |
| 1313 | |
| 1314 | // Set to 1 to use InkEdit control (Tablet PC), if available |
| 1315 | #define wxUSE_INKEDIT 0 |
| 1316 | |
| 1317 | // ---------------------------------------------------------------------------- |
| 1318 | // Generic versions of native controls |
| 1319 | // ---------------------------------------------------------------------------- |
| 1320 | |
| 1321 | // Set this to 1 to be able to use wxDatePickerCtrlGeneric in addition to the |
| 1322 | // native wxDatePickerCtrl |
| 1323 | // |
| 1324 | // Default is 0. |
| 1325 | // |
| 1326 | // Recommended setting: 0, this is mainly used for testing |
| 1327 | #define wxUSE_DATEPICKCTRL_GENERIC 0 |
| 1328 | |
| 1329 | // ---------------------------------------------------------------------------- |
| 1330 | // Crash debugging helpers |
| 1331 | // ---------------------------------------------------------------------------- |
| 1332 | |
| 1333 | // Set this to 1 to be able to use wxCrashReport::Generate() to create mini |
| 1334 | // dumps of your program when it crashes (or at any other moment) |
| 1335 | // |
| 1336 | // Default is 1 if supported by the compiler (VC++ and recent BC++ only). |
| 1337 | // |
| 1338 | // Recommended setting: 1, set to 0 if your programs never crash |
| 1339 | #define wxUSE_CRASHREPORT 1 |
| 1340 | |
| 1341 | // ---------------------------------------------------------------------------- |
| 1342 | // obsolete settings |
| 1343 | // ---------------------------------------------------------------------------- |
| 1344 | |
| 1345 | // NB: all settings in this section are obsolete and should not be used/changed |
| 1346 | // at all, they will disappear |
| 1347 | |
| 1348 | // Define 1 to use bitmap messages. |
| 1349 | #define wxUSE_BITMAP_MESSAGE 1 |
| 1350 | |
| 1351 | #endif // _WX_SETUP_H_ |
| 1352 | |