default id's where possible

[wxWidgets.git] / wxPython / src / _splitter.i

/////////////////////////////////////////////////////////////////////////////
// Name:        _splitter.i
// Purpose:     SWIG interface defs for wxSplitterWindow
//
// Author:      Robin Dunn
//
// Created:     2-June-1998
// RCS-ID:      $Id$
// Copyright:   (c) 2003 by Total Control Software
// Licence:     wxWindows license
/////////////////////////////////////////////////////////////////////////////

// Not a %module


//---------------------------------------------------------------------------

MAKE_CONST_WXSTRING2(SplitterNameStr, wxT("splitter"));

//---------------------------------------------------------------------------
%newgroup

enum {
    wxSP_NOBORDER,
    wxSP_NOSASH,
    wxSP_PERMIT_UNSPLIT,
    wxSP_LIVE_UPDATE,
    wxSP_3DSASH,
    wxSP_3DBORDER,
    wxSP_NO_XP_THEME,
    wxSP_BORDER,
    wxSP_3D,
};


enum wxSplitMode
{
    wxSPLIT_HORIZONTAL = 1,
    wxSPLIT_VERTICAL
};

enum
{
    wxSPLIT_DRAG_NONE,
    wxSPLIT_DRAG_DRAGGING,
    wxSPLIT_DRAG_LEFT_DOWN
};

//---------------------------------------------------------------------------

DocStr(wxSplitterWindow,
"wx.SplitterWindow manages up to two subwindows or panes,
with an optional vertical or horizontal split which can be
used with the mouse or programmatically.
");

RefDoc(wxSplitterWindow, "
 Styles
    wx.SP_3D               Draws a 3D effect border and sash.
    wx.SP_3DSASH           Draws a 3D effect sash.
    wx.SP_3DBORDER         Synonym for wxSP_BORDER.
    wx.SP_BORDER           Draws a standard border.
    wx.SP_NOBORDER         No border (default).
    wx.SP_NO_XP_THEME      Under Windows XP, switches off the
                           attempt to draw the splitter
                           using Windows XP theming, so the
                           borders and sash will take on the
                           pre-XP look.
    wx.SP_PERMIT_UNSPLIT   Always allow to unsplit, even with
                           the minimum pane size other than zero.
    wx.SP_LIVE_UPDATE      Don't draw XOR line but resize the
                           child windows immediately.

 Events

    EVT_SPLITTER_SASH_POS_CHANGING
                           The sash position is in the
                           process of being changed. May be
                           used to modify the position of
                           the tracking bar to properly
                           reflect the position that would
                           be set if the drag were to be
                           completed at this point.

    EVT_SPLITTER_SASH_POS_CHANGED
                           The sash position was
                           changed. May be used to modify
                           the sash position before it is
                           set, or to prevent the change
                           from taking place. 

    EVT_SPLITTER_UNSPLIT   The splitter has been just unsplit.

    EVT_SPLITTER_DCLICK    The sash was double clicked. The
                           default behaviour is to unsplit
                           the window when this happens
                           (unless the minimum pane size has
                           been set to a value greater than
                           zero.)

");


// wxSplitterWindow maintains one or two panes, with an optional vertical or
// horizontal split which can be used with the mouse or programmatically.
class wxSplitterWindow: public wxWindow
{
public:
    %pythonPrepend wxSplitterWindow         "if kwargs.has_key('point'): kwargs['pos'] = kwargs['point'];del kwargs['point']"
    %pythonPrepend wxSplitterWindow()       ""
    %pythonAppend  wxSplitterWindow         "self._setOORInfo(self)"
    %pythonAppend  wxSplitterWindow()       ""

    RefDoc(wxSplitterWindow, ""); // turn it off for the ctors
    
    DocCtorStr(
        wxSplitterWindow(wxWindow* parent, wxWindowID id=-1,
                         const wxPoint& pos = wxDefaultPosition,
                         const wxSize& size = wxDefaultSize,
                         long style=wxSP_3D,
                         const wxString& name = wxPySplitterNameStr),
        "Constructor.  Creates and shows a SplitterWindow.");
    
    DocCtorStrName(
        wxSplitterWindow(),
        "Precreate a SplitterWindow for 2-phase creation.",
        PreSplitterWindow);


    DocDeclStr(
        bool , Create(wxWindow* parent, wxWindowID id=-1,
                      const wxPoint& pos = wxDefaultPosition,
                      const wxSize& size = wxDefaultSize,
                      long style=wxSP_3D,
                      const wxString& name = wxPySplitterNameStr),
        "Create the GUI part of the SplitterWindow for the 2-phase create.");
    


    DocDeclStr(
        wxWindow *, GetWindow1() const,
        "Gets the only or left/top pane.");
    

    DocDeclStr(
        wxWindow *, GetWindow2() const,
        "Gets the right/bottom pane.");


    DocDeclStr(
        void , SetSplitMode(int mode),
        "Sets the split mode.  The mode can be wx.SPLIT_VERTICAL or
wx.SPLIT_HORIZONTAL.  This only sets the internal variable;
does not update the display.");
    

    DocDeclStr(
        wxSplitMode , GetSplitMode() const,
        "Gets the split mode");
    

    DocDeclStr(
        void , Initialize(wxWindow *window),
        "Initializes the splitter window to have one pane.  This
should be called if you wish to initially view only a single
pane in the splitter window.");
    

    // Associates the given window with window 2, drawing the appropriate sash
    // and changing the split mode.
    // Does nothing and returns False if the window is already split.
    // A sashPosition of 0 means choose a default sash position,
    // negative sashPosition specifies the size of right/lower pane as it's
    // absolute value rather than the size of left/upper pane.
    
    DocDeclStr(
        virtual bool , SplitVertically(wxWindow *window1,
                                       wxWindow *window2,
                                       int sashPosition = 0),
        "Initializes the left and right panes of the splitter window.

    window1       The left pane.
    window2       The right pane.
    sashPosition  The initial position of the sash. If this
                  value is positive, it specifies the size
                  of the left pane. If it is negative, it is
                  absolute value gives the size of the right
                  pane. Finally, specify 0 (default) to
                  choose the default position (half of the
                  total window width).

Returns True if successful, False otherwise (the window was
already split).

SplitVertically should be called if you wish to initially
view two panes. It can also be called at any subsequent
time, but the application should check that the window is
not currently split using IsSplit.");
    

    DocDeclStr(
        virtual bool , SplitHorizontally(wxWindow *window1,
                                         wxWindow *window2,
                                         int sashPosition = 0),
        "Initializes the top and bottom panes of the splitter window.

    window1       The top pane.
    window2       The bottom pane.
    sashPosition  The initial position of the sash. If this
                  value is positive, it specifies the size
                  of the upper pane. If it is negative, it
                  is absolute value gives the size of the
                  lower pane. Finally, specify 0 (default)
                  to choose the default position (half of
                  the total window height).

Returns True if successful, False otherwise (the window was
already split).

SplitHorizontally should be called if you wish to initially
view two panes. It can also be called at any subsequent
time, but the application should check that the window is
not currently split using IsSplit.");

    

    DocDeclStr(
        bool , Unsplit(wxWindow *toRemove = NULL),
        "Unsplits the window.  Pass the pane to remove, or None to
remove the right or bottom pane.  Returns True if
successful, False otherwise (the window was not split).

This function will not actually delete the pane being
removed; it sends EVT_SPLITTER_UNSPLIT which can be handled
for the desired behaviour. By default, the pane being
removed is only hidden.");
    


    DocDeclStr(
        bool , ReplaceWindow(wxWindow *winOld, wxWindow *winNew),
        "This function replaces one of the windows managed by the
SplitterWindow with another one. It is in general better to
use it instead of calling Unsplit() and then resplitting the
window back because it will provoke much less flicker. It is
valid to call this function whether the splitter has two
windows or only one.

Both parameters should be non-None and winOld must specify
one of the windows managed by the splitter. If the
parameters are incorrect or the window couldn't be replaced,
False is returned. Otherwise the function will return True,
but please notice that it will not Destroy the replaced
window and you may wish to do it yourself.");
    

    DocDeclStr(
        void , UpdateSize(),
        "Causes any pending sizing of the sash and child panes to
take place immediately.

Such resizing normally takes place in idle time, in order to
wait for layout to be completed. However, this can cause
unacceptable flicker as the panes are resized after the
window has been shown. To work around this, you can perform
window layout (for example by sending a size event to the
parent window), and then call this function, before showing
the top-level window.");


   
    DocDeclStr(
        bool , IsSplit() const,
        "Is the window split?");
    

    DocDeclStr(
        void , SetSashSize(int width),
        "Sets the sash size");
    

    DocDeclStr(
        void , SetBorderSize(int width),
        "Sets the border size");
    

    DocDeclStr(
        int , GetSashSize() const,
        "Gets the sash size");
    

    DocDeclStr(
        int , GetBorderSize() const,
        "Gets the border size");
    

    DocDeclStr(
        void , SetSashPosition(int position, bool redraw = True),
        "Sets the sash position, in pixels.  If redraw is Ttrue then
the panes are resized and the sash and border are redrawn.");
    

    DocDeclStr(
        int , GetSashPosition() const,
        "Returns the surrent sash position.");
    

    DocDeclStr(
        void , SetMinimumPaneSize(int min),
        "Sets the minimum pane size in pixels.

The default minimum pane size is zero, which means that
either pane can be reduced to zero by dragging the sash,
thus removing one of the panes. To prevent this behaviour (and
veto out-of-range sash dragging), set a minimum size,
for example 20 pixels. If the wx.SP_PERMIT_UNSPLIT style is
used when a splitter window is created, the window may be
unsplit even if minimum size is non-zero.");
    
    DocDeclStr(
        int , GetMinimumPaneSize() const,
        "Gets the minimum pane size in pixels.");
    

    DocDeclStr(
        virtual bool , SashHitTest(int x, int y, int tolerance = 5),
        "Tests for x, y over the sash");
    

    DocDeclStr(
        virtual void , SizeWindows(),
        "Resizes subwindows");
    

    void SetNeedUpdating(bool needUpdating);
    bool GetNeedUpdating() const;
};



DocStr(wxSplitterEvent,
       "This class represents the events generated by a splitter control.");

class wxSplitterEvent : public wxNotifyEvent
{
public:
    wxSplitterEvent(wxEventType type = wxEVT_NULL,
                    wxSplitterWindow *splitter = (wxSplitterWindow *)NULL);


    DocDeclStr(
        void , SetSashPosition(int pos),
        "This funciton is only meaningful during
EVT_SPLITTER_SASH_POS_CHANGING and
EVT_SPLITTER_SASH_POS_CHANGED events.  In the case of
_CHANGED events, sets the the new sash position. In the case
of _CHANGING events, sets the new tracking bar position so
visual feedback during dragging will represent that change
that will actually take place. Set to -1 from the event
handler code to prevent repositioning.");
    
    DocDeclStr(
        int , GetSashPosition() const,
        "Returns the new sash position while in
EVT_SPLITTER_SASH_POS_CHANGING and
EVT_SPLITTER_SASH_POS_CHANGED events.");
    

    DocDeclStr(
        wxWindow *, GetWindowBeingRemoved() const,
        "Returns a pointer to the window being removed when a
splitter window is unsplit.");
    

    DocDeclStr(
        int , GetX() const,
        "Returns the x coordinate of the double-click point in a
EVT_SPLITTER_DCLICK event.");
    
    DocDeclStr(
        int , GetY() const,
        "Returns the y coordinate of the double-click point in a
EVT_SPLITTER_DCLICK event.");
    
};



%constant wxEventType wxEVT_COMMAND_SPLITTER_SASH_POS_CHANGED;
%constant wxEventType wxEVT_COMMAND_SPLITTER_SASH_POS_CHANGING;
%constant wxEventType wxEVT_COMMAND_SPLITTER_DOUBLECLICKED;
%constant wxEventType wxEVT_COMMAND_SPLITTER_UNSPLIT;


%pythoncode {
EVT_SPLITTER_SASH_POS_CHANGED = wx.PyEventBinder( wxEVT_COMMAND_SPLITTER_SASH_POS_CHANGED, 1 )
EVT_SPLITTER_SASH_POS_CHANGING = wx.PyEventBinder( wxEVT_COMMAND_SPLITTER_SASH_POS_CHANGING, 1 )
EVT_SPLITTER_DOUBLECLICKED = wx.PyEventBinder( wxEVT_COMMAND_SPLITTER_DOUBLECLICKED, 1 )
EVT_SPLITTER_UNSPLIT = wx.PyEventBinder( wxEVT_COMMAND_SPLITTER_UNSPLIT, 1 )
EVT_SPLITTER_DCLICK = EVT_SPLITTER_DOUBLECLICKED
}

//---------------------------------------------------------------------------