]> git.saurik.com Git - wxWidgets.git/blame - include/wx/univ/setup0.h
put grid string in generic/grid.cpp, not common/datacmn.cpp
[wxWidgets.git] / include / wx / univ / setup0.h
CommitLineData
2b5f62a0
VZ
1///////////////////////////////////////////////////////////////////////////////
2// Name: wx/univ/setup.h
3// Purpose: configuration settings for wxUniversal/MSW
4// Author: Vadim Zeitlin
5// Modified by:
6// Created: 14.08.00
7// RCS-ID: $Id$
8// Copyright: (c) 2000 SciTech Software, Inc. (www.scitechsoft.com)
65571936 9// Licence: wxWindows licence
2b5f62a0
VZ
10///////////////////////////////////////////////////////////////////////////////
11
12#ifndef _WX_UNIV_SETUP_H_
13#define _WX_UNIV_SETUP_H_
14
15// ----------------------------------------------------------------------------
16// global settings
17// ----------------------------------------------------------------------------
18
19// define this to 0 when building wxBase library - this can also be done from
20// makefile/project file overriding the value here
21#ifndef wxUSE_GUI
22 #define wxUSE_GUI 1
23#endif // wxUSE_GUI
24
25// ----------------------------------------------------------------------------
26// compatibility settings
27// ----------------------------------------------------------------------------
28
dee1a63f 29// This setting determines the compatibility with 2.4 API: set it to 1 to
2b5f62a0
VZ
30// enable it
31//
134ecc85 32// Default is 0.
2b5f62a0
VZ
33//
34// Recommended setting: 0 (please update your code instead!)
dee1a63f 35#define WXWIN_COMPATIBILITY_2_4 0
2b5f62a0 36
dee1a63f 37// This setting determines the compatibility with 2.6 API: set it to 0 to
134ecc85
VZ
38// flag all cases of using deprecated functions.
39//
40// Default is 1 but please try building your code with 0 as the default will
41// change to 0 in the next version and the deprecated functions will disappear
42// in the version after it completely.
43//
44// Recommended setting: 0 (please update your code)
dee1a63f 45#define WXWIN_COMPATIBILITY_2_6 1
134ecc85 46
2b5f62a0
VZ
47// Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before.
48// If migrating between versions, your dialogs may seem to shrink.
49//
50// Default is 1
51//
52// Recommended setting: 0 (the new calculations are more correct!)
53#define wxDIALOG_UNIT_COMPATIBILITY 0
54
55// ----------------------------------------------------------------------------
56// debugging settings
57// ----------------------------------------------------------------------------
58
59// Generic comment about debugging settings: they are very useful if you don't
60// use any other memory leak detection tools such as Purify/BoundsChecker, but
61// are probably redundant otherwise. Also, Visual C++ CRT has the same features
77ffb593 62// as wxWidgets memory debugging subsystem built in since version 5.0 and you
2b5f62a0
VZ
63// may prefer to use it instead of built in memory debugging code because it is
64// faster and more fool proof.
65//
66// Using VC++ CRT memory debugging is enabled by default in debug mode
67// (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
68// and if __NO_VC_CRTDBG__ is not defined.
69
70// If 1, enables wxDebugContext, for writing error messages to file, etc. If
71// __WXDEBUG__ is not defined, will still use the normal memory operators.
72//
73// Default is 0
74//
75// Recommended setting: 0
76#ifdef __MWERKS__
77 #define wxUSE_DEBUG_CONTEXT 1
78#else
79 #define wxUSE_DEBUG_CONTEXT 0
80#endif
81
82// If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
83// __WXDEBUG__ is also defined.
84//
85// WARNING: this code may not work with all architectures, especially if
86// alignment is an issue. This switch is currently ignored for mingw / cygwin
87//
88// Default is 0
89//
90// Recommended setting: 1 if you are not using a memory debugging tool, else 0
91#define wxUSE_MEMORY_TRACING 0
92
93// In debug mode, cause new and delete to be redefined globally.
94// If this causes problems (e.g. link errors which is a common problem
95// especially if you use another library which also redefines the global new
96// and delete), set this to 0.
97// This switch is currently ignored for mingw / cygwin
98//
99// Default is 0
100//
101// Recommended setting: 0
102#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
103
104// In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
105// this causes problems (e.g. link errors), set this to 0. You may need to set
106// this to 0 if using templates (at least for VC++). This switch is currently
107// ignored for mingw / cygwin / CodeWarrior
108//
109// Default is 0
110//
111// Recommended setting: 0
112#define wxUSE_DEBUG_NEW_ALWAYS 0
113
114// wxHandleFatalExceptions() may be used to catch the program faults at run
115// time and, instead of terminating the program with a usual GPF message box,
116// call the user-defined wxApp::OnFatalException() function. If you set
117// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
118//
119// This setting is for Win32 only and can only be enabled if your compiler
120// supports Win32 structured exception handling (currently only VC++ does)
121//
122// Default is 1
123//
124// Recommended setting: 1 if your compiler supports it.
125#ifdef _MSC_VER
126 #define wxUSE_ON_FATAL_EXCEPTION 1
127#else
128 #define wxUSE_ON_FATAL_EXCEPTION 0
129#endif
130
131// ----------------------------------------------------------------------------
132// Unicode support
133// ----------------------------------------------------------------------------
134
77ffb593 135// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
2b5f62a0
VZ
136// defined as wchar_t, wxString will use Unicode internally. If you set this
137// to 1, you must use wxT() macro for all literal strings in the program.
138//
139// Unicode is currently only fully supported under Windows NT/2000/XP (Windows 9x
140// doesn't support it and the programs compiled in Unicode mode will not run
141// under 9x).
142//
143// Default is 0
144//
145// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
86c8acb7
VZ
146#ifndef wxUSE_UNICODE
147 #define wxUSE_UNICODE 0
148#endif
2b5f62a0 149
77ffb593 150// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode
2b5f62a0
VZ
151// and be able to run compiled apps under Windows 9x as well as NT/2000/XP. This
152// setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
153// http://www.microsoft.com/globaldev/Articles/mslu_announce.asp). Note that you
154// will have to modify the makefiles to include unicows.lib import library as the first
155// library (if you use MSVC, you can run the makefile with "nmake MSLU=1 UNICODE=1"
156// command).
157//
158// If your compiler doesn't have unicows.lib, you can get a version of it at
159// http://libunicows.sourceforge.net
160//
161// Default is 0
162//
163// Recommended setting: 0
164#define wxUSE_UNICODE_MSLU 0
165
166// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
167// compiling the program in Unicode mode. More precisely, it will be possible
168// to construct wxString from a wide (Unicode) string and convert any wxString
169// to Unicode.
170//
171// Default is 1
172//
173// Recommended setting: 1 for win32 else 0
127eab18 174#if defined(__WIN32__) || defined(__WATCOMC__)
317246df 175 #define wxUSE_WCHAR_T 1
2b5f62a0
VZ
176#else
177 #define wxUSE_WCHAR_T 0
178#endif
179
180// ----------------------------------------------------------------------------
181// global features
182// ----------------------------------------------------------------------------
183
c37dc21c
VZ
184// Compile library in exception-safe mode? If set to 1, the library will try to
185// behave correctly in presence of exceptions (even though it still will not
186// use the exceptions itself) and notify the user code about any unhandled
187// exceptions. If set to 0, propagation of the exceptions through the library
188// code will lead to undefined behaviour -- but the code itself will be
189// slightly smaller and faster.
190//
191// Default is 1
192//
193// Recommended setting: depends on whether you intend to use C++ exceptions
194// in your own code (1 if you do, 0 if you don't)
195#define wxUSE_EXCEPTIONS 1
196
252e57ce
VZ
197// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
198// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
199// and for wxHashMap to be implemented with templates.
200//
201// Default is 0
202//
203// Recommended setting: YMMV
204#define wxUSE_STL 0
205
206// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
207//
208// Default is 0
209//
210// Recommended setting: 0
211#define wxUSE_EXTENDED_RTTI 0
212
2b5f62a0
VZ
213// Support for message/error logging. This includes wxLogXXX() functions and
214// wxLog and derived classes. Don't set this to 0 unless you really know what
215// you are doing.
216//
217// Default is 1
218//
219// Recommended setting: 1 (always)
220#define wxUSE_LOG 1
221
2b5f62a0
VZ
222// Recommended setting: 1
223#define wxUSE_LOGWINDOW 1
224
225// Recommended setting: 1
226#define wxUSE_LOGGUI 1
227
228// Recommended setting: 1
229#define wxUSE_LOG_DIALOG 1
230
715d7d25
JS
231// Support for command line parsing using wxCmdLineParser class.
232//
233// Default is 1
234//
235// Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
236#define wxUSE_CMDLINE_PARSER 1
237
2b5f62a0
VZ
238// Support for multithreaded applications: if 1, compile in thread classes
239// (thread.h) and make the library a bit more thread safe. Although thread
240// support is quite stable by now, you may still consider recompiling the
241// library without it if you have no use for it - this will result in a
242// somewhat smaller and faster operation.
243//
244// This is ignored under Win16, threads are only supported under Win32.
245//
246// Default is 1
247//
248// Recommended setting: 0 unless you do plan to develop MT applications
249#define wxUSE_THREADS 1
250
77ffb593 251// If enabled (1), compiles wxWidgets streams classes
2b5f62a0
VZ
252#define wxUSE_STREAMS 1
253
254// Use standard C++ streams if 1. If 0, use wxWin streams implementation.
255#ifdef __MWERKS__
256 #define wxUSE_STD_IOSTREAM 1
257#else
258 #define wxUSE_STD_IOSTREAM 0
259#endif
260
b41af6aa
WS
261// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
262// Note that if the system's implementation does not support positional
263// parameters, setting this to 1 forces the use of the wxWidgets implementation
264// of wxVsnprintf. The standard vsnprintf() supports positional parameters on
265// many Unix systems but usually doesn't under Windows.
266//
267// Positional parameters are very useful when translating a program since using
268// them in formatting strings allow translators to correctly reorder the
269// translated sentences.
270//
271// Default is 1
272//
273// Recommended setting: 1 if you want to support multiple languages
274#define wxUSE_PRINTF_POS_PARAMS 0
275
2b5f62a0
VZ
276// ----------------------------------------------------------------------------
277// non GUI features selection
278// ----------------------------------------------------------------------------
279
280// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
281// integer which is implemented in terms of native 64 bit integers if any or
282// uses emulation otherwise.
283//
284// This class is required by wxDateTime and so you should enable it if you want
285// to use wxDateTime. For most modern platforms, it will use the native 64 bit
286// integers in which case (almost) all of its functions are inline and it
287// almost does not take any space, so there should be no reason to switch it
288// off.
289//
290// Recommended setting: 1
291#define wxUSE_LONGLONG 1
292
293// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
294// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
295//
296// Default is 1
297//
298// Recommended setting: 1 (wxFile is highly recommended as it is required by
299// i18n code, wxFileConfig and others)
300#define wxUSE_FILE 1
301#define wxUSE_FFILE 1
302
303// Use wxFSVolume class providing access to the configured/active mount points
304//
305// Default is 1
306//
307// Recommended setting: 1 (but may be safely disabled if you don't use it)
308#define wxUSE_FSVOLUME 1
309
a28b4703
WS
310// Use wxStandardPaths class which allows to retrieve some standard locations
311// in the file system
312//
313// Default is 1
314//
315// Recommended setting: 1 (may be disabled to save space, but not much)
316#define wxUSE_STDPATHS 1
317
2b5f62a0
VZ
318// use wxTextBuffer class: required by wxTextFile
319#define wxUSE_TEXTBUFFER 1
320
321// use wxTextFile class: requires wxFile and wxTextBuffer, required by
322// wxFileConfig
323#define wxUSE_TEXTFILE 1
324
325// i18n support: _() macro, wxLocale class. Requires wxTextFile.
326#define wxUSE_INTL 1
327
328// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
329// allow to manipulate dates, times and time intervals. wxDateTime replaces the
330// old wxTime and wxDate classes which are still provided for backwards
331// compatibility (and implemented in terms of wxDateTime).
332//
333// Note that this class is relatively new and is still officially in alpha
334// stage because some features are not yet (fully) implemented. It is already
335// quite useful though and should only be disabled if you are aiming at
336// absolutely minimal version of the library.
337//
338// Requires: wxUSE_LONGLONG
339//
340// Default is 1
341//
342// Recommended setting: 1
343#define wxUSE_DATETIME 1
344
345// wxUSE_TIMEDATE enables compilation of the old wxDate and wxTime classes (not
346// the same as wxDateTime!). These classes are obsolete and shouldn't be used
347// in new code
348//
349// Default is 0
350//
351// Recommended setting: 0 unless you have legacy code which uses these classes
352#define wxUSE_TIMEDATE 0
353
354// Set wxUSE_TIMER to 1 to compile wxTimer class
355//
356// Default is 1
357//
358// Recommended setting: 1
359#define wxUSE_TIMER 1
360
361// Use wxStopWatch clas.
362//
363// Default is 1
364//
365// Recommended setting: 1 (needed by wxSocket)
366#define wxUSE_STOPWATCH 1
367
368// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
369// which allow the application to store its settings in the persistent
370// storage. Setting this to 1 will also enable on-demand creation of the
371// global config object in wxApp.
372//
373// See also wxUSE_CONFIG_NATIVE below.
374//
375// Recommended setting: 1
376#define wxUSE_CONFIG 1
377
378// If wxUSE_CONFIG is 1, you may choose to use either the native config
379// classes under Windows (using .INI files under Win16 and the registry under
380// Win32) or the portable text file format used by the config classes under
381// Unix.
382//
383// Default is 1 to use native classes. Note that you may still use
384// wxFileConfig even if you set this to 1 - just the config object created by
385// default for the applications needs will be a wxRegConfig or wxIniConfig and
386// not wxFileConfig.
387//
388// Recommended setting: 0 (universal should not use native)
389#if defined(__WIN32__)
390 #define wxUSE_CONFIG_NATIVE 0
391#else
392 #define wxUSE_CONFIG_NATIVE 0
393#endif
394
395// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
396// to connect/disconnect from the network and be notified whenever the dial-up
397// network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
398//
399// Default is 1.
400//
401// Recommended setting: 1
402#if defined(__WIN32__)
403 #define wxUSE_DIALUP_MANAGER 1
404#else
405 #define wxUSE_DIALUP_MANAGER 0
406#endif
407
408// Compile in classes for run-time DLL loading and function calling.
409// Required by wxUSE_DIALUP_MANAGER.
410//
411// This setting is for Win32 only
412//
413// Default is 1.
414//
415// Recommended setting: 1
416#if defined(__WIN32__)
417 #define wxUSE_DYNLIB_CLASS 1
418#else
419 #define wxUSE_DYNLIB_CLASS 0
420#endif
421
422// experimental, don't use for now
423#if defined(__WIN32__)
424 #define wxUSE_DYNAMIC_LOADER 1
425#else
426 #define wxUSE_DYNAMIC_LOADER 0
427#endif
428
429// Set to 1 to use socket classes
430#define wxUSE_SOCKETS 1
431
432// Set to 1 to enable virtual file systems (required by wxHTML)
433#define wxUSE_FILESYSTEM 1
434
435// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
436#define wxUSE_FS_ZIP 1
437
81f90336 438// wxArchive classes for accessing archives such as zip and tar
9e8e867f 439#define wxUSE_ARCHIVE_STREAMS 1
81f90336 440
2b5f62a0
VZ
441// Set to 1 to compile wxZipInput/OutputStream classes.
442#define wxUSE_ZIPSTREAM 1
443
444// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
477a6238 445// wxUSE_LIBPNG
6f96ac03
VZ
446#define wxUSE_ZLIB 1
447
2b5f62a0
VZ
448// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
449#define wxUSE_FS_INET 1
450
451// If enabled, the code written by Apple will be used to write, in a portable
452// way, float on the disk. See extended.c for the license which is different
77ffb593 453// from wxWidgets one.
2b5f62a0
VZ
454//
455// Default is 1.
456//
457// Recommended setting: 1 unless you don't like the license terms (unlikely)
458#define wxUSE_APPLE_IEEE 1
459
460// Joystick support class
461#if defined(__WIN32__)
462 #define wxUSE_JOYSTICK 1
463#else
464 #define wxUSE_JOYSTICK 1
465#endif
466
467// wxFontMapper class
468#define wxUSE_FONTMAP 1
469
470// wxMimeTypesManager class
471#define wxUSE_MIMETYPE 1
472
473// wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP
474// or wxURL you need to set this to 1.
475//
476// Default is 1.
477//
478// Recommended setting: 1
479#define wxUSE_PROTOCOL 1
480
2b5f62a0
VZ
481// The settings for the individual URL schemes
482#define wxUSE_PROTOCOL_FILE 1
483#define wxUSE_PROTOCOL_FTP 1
484#define wxUSE_PROTOCOL_HTTP 1
485
715d7d25
JS
486// Define this to use wxURL class.
487#define wxUSE_URL 1
488
b6428aba
WS
489// Support for wxVariant class used in several places throughout the library,
490// notably in wxDataViewCtrl API.
491//
492// Default is 1.
493//
494// Recommended setting: 1 unless you want to reduce the library size as much as
495// possible in which case setting this to 0 can gain up to 100KB.
496#define wxUSE_VARIANT 1
497
2b5f62a0
VZ
498// Support for regular expression matching via wxRegEx class: enable this to
499// use POSIX regular expressions in your code. You need to compile regex
500// library from src/regex to use it under Windows.
501//
502// Default is 0
503//
504// Recommended setting: 1 if your compiler supports it, if it doesn't please
505// contribute us a makefile for src/regex for it
506#define wxUSE_REGEX 1
507
508// wxSystemOptions class
509#define wxUSE_SYSTEM_OPTIONS 1
510
002ed9af
VS
511// wxSound class
512#define wxUSE_SOUND 1
2b5f62a0 513
c8a50408
RN
514// Use wxMediaCtrl
515//
516// Default is 1.
517//
922bcaff 518// Recommended setting: 1
c8a50408
RN
519#define wxUSE_MEDIACTRL 1
520
521// Use QuickTime
522//
523// Default is 0
524//
525// Recommended setting: 1 if you have the QT SDK installed and you need it, else 0
526#define wxUSE_QUICKTIME 0
527
528// Use DirectShow
529//
530// Default is 0
531//
532// Recommended setting: 1 if the DirectX 7 SDK is installed (highly recommended), else 0
533#define wxUSE_DIRECTSHOW 0
534
9581c3c6
RN
535// Use wxWidget's XRC XML-based resource system. Recommended.
536//
537// Default is 1
538//
84fe931d 539// Recommended setting: 1 (requires wxUSE_XML)
9581c3c6
RN
540#define wxUSE_XRC 1
541
7de1e98d
JS
542// XML parsing classes. Note that their API will change in the future, so
543// using wxXmlDocument and wxXmlNode in your app is not recommended.
544//
545// Default is 1
546//
9581c3c6
RN
547// Recommended setting: 1 (required by XRC)
548#if wxUSE_XRC
549# define wxUSE_XML 1
550#else
551# define wxUSE_XML 0
552#endif
7de1e98d 553
5e4903f5
JS
554// Use wxWidget's AUI docking system
555//
556// Default is 1
557//
558// Recommended setting: 1
559#define wxUSE_AUI 1
560
7de1e98d
JS
561// Set to 1 to compile MS Windows XP theme engine support
562#define wxUSE_UXTHEME 0
563
564// Set to 1 to auto-adapt to MS Windows XP themes where possible
565// (notably, wxNotebook pages)
566#define wxUSE_UXTHEME_AUTO 0
567
2b5f62a0
VZ
568// ----------------------------------------------------------------------------
569// Individual GUI controls
570// ----------------------------------------------------------------------------
571
572// You must set wxUSE_CONTROLS to 1 if you are using any controls at all
573// (without it, wxControl class is not compiled)
574//
575// Default is 1
576//
577// Recommended setting: 1 (don't change except for very special programs)
578#define wxUSE_CONTROLS 1
579
580// wxPopupWindow class is a top level transient window. It is currently used
581// to implement wxTipWindow
582//
583// Default is 1
584//
585// Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
586#define wxUSE_POPUPWIN 1
587
588// wxTipWindow allows to implement the custom tooltips, it is used by the
589// context help classes. Requires wxUSE_POPUPWIN.
590//
591// Default is 1
592//
593// Recommended setting: 1 (may be set to 0)
594#define wxUSE_TIPWINDOW 1
595
77ffb593 596// Each of the settings below corresponds to one wxWidgets control. They are
2b5f62a0
VZ
597// all switched on by default but may be disabled if you are sure that your
598// program (including any standard dialogs it can show!) doesn't need them and
599// if you desperately want to save some space. If you use any of these you must
600// set wxUSE_CONTROLS as well.
601//
602// Default is 1
603//
604// Recommended setting: 1
24bbfc62
WS
605#define wxUSE_BUTTON 1 // wxButton
606#define wxUSE_BMPBUTTON 1 // wxBitmapButton
607#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
608#define wxUSE_CHECKBOX 1 // wxCheckBox
609#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox
610#define wxUSE_CHOICE 1 // wxChoice
611#define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl
612#define wxUSE_COMBOBOX 1 // wxComboBox
613#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
614#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
615#define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl
616#define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl
617#define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl
618#define wxUSE_GAUGE 1 // wxGauge
619#define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl
620#define wxUSE_LISTBOX 1 // wxListBox
621#define wxUSE_LISTCTRL 1 // wxListCtrl
622#define wxUSE_RADIOBOX 1 // wxRadioBox
623#define wxUSE_RADIOBTN 1 // wxRadioButton
624#define wxUSE_SCROLLBAR 1 // wxScrollBar
625#define wxUSE_SLIDER 1 // wxSlider
626#define wxUSE_SPINBTN 1 // wxSpinButton
627#define wxUSE_SPINCTRL 1 // wxSpinCtrl
628#define wxUSE_STATBOX 1 // wxStaticBox
629#define wxUSE_STATLINE 1 // wxStaticLine
630#define wxUSE_STATTEXT 1 // wxStaticText
631#define wxUSE_STATBMP 1 // wxStaticBitmap
632#define wxUSE_TEXTCTRL 1 // wxTextCtrl
633#define wxUSE_TOGGLEBTN 1 // wxToggleButton
634#define wxUSE_TREECTRL 1 // wxTreeCtrl
2b5f62a0
VZ
635
636// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
637// below either wxStatusBar95 or a generic wxStatusBar will be used.
638//
639// Default is 1
640//
641// Recommended setting: 1
642#define wxUSE_STATUSBAR 1
643
644// Two status bar implementations are available under Win32: the generic one
645// or the wrapper around native control. For native look and feel the native
646// version should be used.
647//
648// Default is 0.
649//
650// Recommended setting: 0
651#define wxUSE_NATIVE_STATUSBAR 0
652
653// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
654// classes at all. Otherwise, use the native toolbar class unless
8a82c9ec 655// wxUSE_TOOLBAR_NATIVE is 0.
2b5f62a0
VZ
656//
657// Default is 0 for all settings.
658//
8a82c9ec 659// Recommended setting: 1 for wxUSE_TOOLBAR and 0 for wxUSE_TOOLBAR_NATIVE.
2b5f62a0
VZ
660#define wxUSE_TOOLBAR 1
661#define wxUSE_TOOLBAR_NATIVE 0
2b5f62a0 662
2b5f62a0
VZ
663// wxNotebook is a control with several "tabs" located on one of its sides. It
664// may be used ot logically organise the data presented to the user instead of
665// putting everything in one huge dialog. It replaces wxTabControl and related
666// classes of wxWin 1.6x.
667//
668// Default is 1.
669//
670// Recommended setting: 1
671#define wxUSE_NOTEBOOK 1
672
e9c0df38
VZ
673// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
674// the tabs
675//
676// Default is 1.
677//
678// Recommended setting: 1
679#define wxUSE_LISTBOOK 1
680
f5e0b4bc
WS
681// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
682// the tabs
683//
684// Default is 1.
685//
686// Recommended setting: 1
687#define wxUSE_CHOICEBOOK 1
688
eca15c0d
VZ
689// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
690// the tabs
691//
692// Default is 1.
693//
694// Recommended setting: 1
695#define wxUSE_TREEBOOK 1
696
e36bdde2
WS
697// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
698// tabs
699//
700// Default is 1.
701//
702// Recommended setting: 1
703#define wxUSE_TOOLBOOK 1
704
2b5f62a0
VZ
705// wxTabDialog is a generic version of wxNotebook but it is incompatible with
706// the new class. It shouldn't be used in new code.
707//
708// Default is 0.
709//
710// Recommended setting: 0 (use wxNotebook)
711#define wxUSE_TAB_DIALOG 0
712
e36bdde2
WS
713// wxGrid class
714//
715// Default is 1, set to 0 to cut down compilation time and binaries size if you
716// don't use it.
717//
718// Recommended setting: 1
2b5f62a0 719//
2b5f62a0 720#define wxUSE_GRID 1
2b5f62a0
VZ
721
722// wxProperty[Value/Form/List] classes, used by Dialog Editor
723#define wxUSE_PROPSHEET 1
724
e36bdde2
WS
725// wxComboCtrl and related classes: combobox with custom popup window and
726// not necessarily a listbox.
727//
728// Default is 1.
729//
730// Recommended setting: 1 but can be safely set to 0 except for wxUniv where it
731// it used by wxComboBox
732#define wxUSE_COMBOCTRL 1
733
734// wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox
735// items.
736//
737// Default is 1.
738//
95a46303
RR
739// Recommended setting: 1 but can be safely set to 0, except where it is
740// needed as a base class for generic wxBitmapComboBox.
e36bdde2
WS
741#define wxUSE_ODCOMBOBOX 1
742
95a46303
RR
743// wxBitmapComboBox a combobox that can have images in front of text items.
744//
745// Default is 1.
746//
747// Recommended setting: 1 but can be safely set to 0
748#define wxUSE_BITMAPCOMBOBOX 1
749
2b5f62a0
VZ
750// ----------------------------------------------------------------------------
751// Miscellaneous GUI stuff
752// ----------------------------------------------------------------------------
753
754// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
755#define wxUSE_ACCEL 1
756
757// Use wxCaret: a class implementing a "cursor" in a text control (called caret
758// under Windows).
759//
760// Default is 1.
761//
762// Recommended setting: 1 (can be safely set to 0, not used by the library)
763#define wxUSE_CARET 1
764
715d7d25
JS
765// Use wxDisplay class: it allows enumerating all displays on a system and
766// working with them.
767//
768// Default is 0 because it isn't yet implemented on all platforms
769//
770// Recommended setting: 1 if you need it, can be safely set to 0 otherwise
771#define wxUSE_DISPLAY 0
772
2b5f62a0
VZ
773// Miscellaneous geometry code: needed for Canvas library
774#define wxUSE_GEOMETRY 0
775
776// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
777// wxListCtrl.
778//
779// Default is 1.
780//
781// Recommended setting: 1 (set it to 0 if you don't use any of the controls
782// enumerated above, then this class is mostly useless too)
783#define wxUSE_IMAGLIST 1
784
785// Use wxMenu, wxMenuBar, wxMenuItem.
786//
787// Default is 1.
788//
789// Recommended setting: 1 (can't be disabled under MSW)
790#define wxUSE_MENUS 1
791
792// Use wxSashWindow class.
793//
794// Default is 1.
795//
796// Recommended setting: 1
797#define wxUSE_SASH 1
798
799// Use wxSplitterWindow class.
800//
801// Default is 1.
802//
803// Recommended setting: 1
804#define wxUSE_SPLITTER 1
805
806// Use wxToolTip and wxWindow::Set/GetToolTip() methods.
807//
808// Default is 1.
809//
810// Recommended setting: 1
c3a6a2bc
JS
811#ifdef __WIN32__
812 #define wxUSE_TOOLTIPS 1
813#else
814 #define wxUSE_TOOLTIPS 0
815#endif
2b5f62a0
VZ
816
817// wxValidator class and related methods
818#define wxUSE_VALIDATORS 1
819
820// wxDC cacheing implementation
821#define wxUSE_DC_CACHEING 1
822
715d7d25
JS
823// Set this to 1 to enable the use of DIB's for wxBitmap to support
824// bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only.
825#define wxUSE_DIB_FOR_BITMAP 0
826
2b5f62a0
VZ
827// ----------------------------------------------------------------------------
828// common dialogs
829// ----------------------------------------------------------------------------
830
2b5f62a0
VZ
831// On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
832// file selector, printer dialog). Switching this off also switches off the
833// printing architecture and interactive wxPrinterDC.
834//
835// Default is 1
836//
837// Recommended setting: 1 (unless it really doesn't work)
838#define wxUSE_COMMON_DIALOGS 1
839
840// wxBusyInfo displays window with message when app is busy. Works in same way
841// as wxBusyCursor
842#define wxUSE_BUSYINFO 1
843
844// Use single/multiple choice dialogs.
845//
846// Default is 1
847//
848// Recommended setting: 1 (used in the library itself)
849#define wxUSE_CHOICEDLG 1
850
851// Use colour picker dialog
852//
853// Default is 1
854//
855// Recommended setting: 1
856#define wxUSE_COLOURDLG 1
857
858// wxDirDlg class for getting a directory name from user
859#define wxUSE_DIRDLG 1
860
861// TODO: setting to choose the generic or native one
862
863// Use file open/save dialogs.
864//
865// Default is 1
866//
867// Recommended setting: 1 (used in many places in the library itself)
868#if defined(__WIN32__)
869 #define wxUSE_FILEDLG 1
870#else
871 #define wxUSE_FILEDLG 1
872#endif
873
874// Use find/replace dialogs.
875//
876// Default is 1
877//
878// Recommended setting: 1 (but may be safely set to 0)
879#define wxUSE_FINDREPLDLG 1
880
881// Use font picker dialog
882//
883// Default is 1
884//
885// Recommended setting: 1 (used in the library itself)
886#define wxUSE_FONTDLG 1
887
888// Use wxMessageDialog and wxMessageBox.
889//
890// Default is 1
891//
892// Recommended setting: 1 (used in the library itself)
893#define wxUSE_MSGDLG 1
894
895// progress dialog class for lengthy operations
896#define wxUSE_PROGRESSDLG 1
897
898// support for startup tips (wxShowTip &c)
899#define wxUSE_STARTUP_TIPS 1
900
901// text entry dialog and wxGetTextFromUser function
902#define wxUSE_TEXTDLG 1
903
904// number entry dialog
905#define wxUSE_NUMBERDLG 1
906
907// splash screen class
908#define wxUSE_SPLASH 1
909
910// wizards
29f82345 911#define wxUSE_WIZARDDLG 1
2b5f62a0
VZ
912
913// ----------------------------------------------------------------------------
914// Metafiles support
915// ----------------------------------------------------------------------------
916
917// Windows supports the graphics format known as metafile which is, though not
918// portable, is widely used under Windows and so is supported by wxWin (under
919// Windows only, of course). Win16 (Win3.1) used the so-called "Window
920// MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
921// Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
922// default, WMFs will be used under Win16 and EMFs under Win32. This may be
923// changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
924// wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
925// in any metafile related classes at all.
926//
927// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
928//
929// Recommended setting: default or 0 for everything for portable programs.
5cdff299
JS
930#if defined(__WIN32__)
931 #define wxUSE_METAFILE 1
932 #define wxUSE_ENH_METAFILE 1
933 #define wxUSE_WIN_METAFILES_ALWAYS 0
934#else
935 #define wxUSE_METAFILE 0
936 #define wxUSE_ENH_METAFILE 0
937 #define wxUSE_WIN_METAFILES_ALWAYS 0
938#endif
2b5f62a0
VZ
939
940// ----------------------------------------------------------------------------
941// Big GUI components
942// ----------------------------------------------------------------------------
943
496e80e5
JS
944// Set to 0 to disable MDI support.
945//
946// Requires wxUSE_NOTEBOOK under platforms other than MSW.
947//
948// Default is 1.
949//
950// Recommended setting: 1, can be safely set to 0.
951#define wxUSE_MDI 1
952
2b5f62a0
VZ
953// Set to 0 to disable document/view architecture
954#define wxUSE_DOC_VIEW_ARCHITECTURE 1
955
956// Set to 0 to disable MDI document/view architecture
81152407
VZ
957//
958// Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
2b5f62a0
VZ
959#define wxUSE_MDI_ARCHITECTURE 1
960
961// Set to 0 to disable print/preview architecture code
12bdd77c 962#define wxUSE_PRINTING_ARCHITECTURE 1
2b5f62a0
VZ
963
964// wxHTML sublibrary allows to display HTML in wxWindow programs and much,
965// much more.
966//
967// Default is 1.
968//
969// Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
970// smaller library.
971#define wxUSE_HTML 1
972
715d7d25
JS
973// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
974// headers and libraries to be able to compile the library with wxUSE_GLCANVAS
975// set to 1. Note that for some compilers (notably Microsoft Visual C++) you
976// will need to manually add opengl32.lib and glu32.lib to the list of
977// libraries linked with your program if you use OpenGL.
978//
979// Default is 0.
980//
981// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
2b5f62a0 982#if defined(__WIN32__)
5cdff299 983 #define wxUSE_GLCANVAS 1
2b5f62a0
VZ
984#else
985 #define wxUSE_GLCANVAS 0
986#endif
987
922bcaff
WS
988// wxRichTextCtrl allows editing of styled text.
989//
990// Default is 1.
991//
992// Recommended setting: 1, set to 0 if you want compile a
993// smaller library.
994#define wxUSE_RICHTEXT 1
995
2b5f62a0
VZ
996// wxTreeLayout class
997#define wxUSE_TREELAYOUT 1
998
999// ----------------------------------------------------------------------------
1000// Data transfer
1001// ----------------------------------------------------------------------------
1002
1003// Use wxClipboard class for clipboard copy/paste.
1004//
1005// Default is 1.
1006//
1007// Recommended setting: 1
5cdff299 1008#define wxUSE_CLIPBOARD 1
2b5f62a0
VZ
1009
1010// Use wxDataObject and related classes. Needed for clipboard and OLE drag and
1011// drop
1012//
1013// Default is 1.
1014//
5cdff299 1015// Recommended setting: 1 for WIN32
2b5f62a0
VZ
1016#define wxUSE_DATAOBJ 1
1017
1018// Use wxDropTarget and wxDropSource classes for drag and drop (this is
1019// different from "built in" drag and drop in wxTreeCtrl which is always
1020// available). Requires wxUSE_DATAOBJ.
1021//
1022// Default is 1.
1023//
1024// Recommended setting: 1
1025#if defined(__WIN32__)
5cdff299 1026 #define wxUSE_DRAG_AND_DROP 1
2b5f62a0
VZ
1027#else
1028 #define wxUSE_DRAG_AND_DROP 0
1029#endif
1030
715d7d25
JS
1031// Use wxAccessible for enhanced and customisable accessibility.
1032// Depends on wxUSE_OLE.
1033//
1034// Default is 0.
1035//
1036// Recommended setting (at present): 0
1037#define wxUSE_ACCESSIBILITY 0
1038
2b5f62a0
VZ
1039// ----------------------------------------------------------------------------
1040// miscellaneous settings
1041// ----------------------------------------------------------------------------
1042
1043// wxSingleInstanceChecker class allows to verify at startup if another program
1044// instance is running (it is only available under Win32)
1045//
1046// Default is 1
1047//
1048// Recommended setting: 1 (the class is tiny, disabling it won't save much
1049// space)
1050#if defined(__WIN32__)
1051 #define wxUSE_SNGLINST_CHECKER 1
1052#else
1053 #define wxUSE_SNGLINST_CHECKER 0
1054#endif
1055
1056// Drag image
1057#define wxUSE_DRAGIMAGE 1
1058
1059// Interprocess communication
1060#define wxUSE_IPC 1
1061
1062// Help
1063#if defined(__WIN32__)
1064 #define wxUSE_HELP 1
1065#else
1066 #define wxUSE_HELP 1
1067#endif
1068
1069// MS help
1070#define wxUSE_MS_HTML_HELP 1
1071
5cdff299 1072// Use wxHTML-based help controller
aab49a0b 1073#define wxUSE_WXHTML_HELP 1
2b5f62a0
VZ
1074
1075// Use resources
922bcaff 1076#define wxUSE_RESOURCES 0
2b5f62a0
VZ
1077
1078// Window layout constraint system
1079#define wxUSE_CONSTRAINTS 1
1080
1081// Splines
1082#define wxUSE_SPLINES 1
1083
2b5f62a0
VZ
1084// Include mouse wheel support
1085#define wxUSE_MOUSEWHEEL 1
1086
1087// ----------------------------------------------------------------------------
1088// postscript support settings
1089// ----------------------------------------------------------------------------
1090
1091// Set to 1 for PostScript device context.
1092#define wxUSE_POSTSCRIPT 1
1093
1094// Set to 1 to use font metric files in GetTextExtent
1095#define wxUSE_AFM_FOR_POSTSCRIPT 1
1096
2b5f62a0
VZ
1097// ----------------------------------------------------------------------------
1098// database classes
1099// ----------------------------------------------------------------------------
1100
1101// Define 1 to use ODBC classes
1102#define wxUSE_ODBC 1
1103
1104// For backward compatibility reasons, this parameter now only controls the
1105// default scrolling method used by cursors. This default behavior can be
1106// overriden by setting the second param of wxDB::wxDbGetConnection() or
1107// wxDb() constructor to indicate whether the connection (and any wxDbTable()s
1108// that use the connection) should support forward only scrolling of cursors,
1109// or both forward and backward support for backward scrolling cursors is
1110// dependent on the data source as well as the ODBC driver being used.
1111#define wxODBC_FWD_ONLY_CURSORS 0
1112
1113// Default is 0. Set to 1 to use the deprecated classes, enum types, function,
3103e8a9 1114// member variables. With a setting of 1, full backward compatibility with the
2b5f62a0
VZ
1115// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
1116// as future development will be done only on the non-deprecated
1117// functions/classes/member variables/etc.
1118#define wxODBC_BACKWARD_COMPATABILITY 0
1119
1120// ----------------------------------------------------------------------------
1121// other compiler (mis)features
1122// ----------------------------------------------------------------------------
1123
1124// Set this to 0 if your compiler can't cope with omission of prototype
1125// parameters.
1126//
1127// Default is 1.
1128//
1129// Recommended setting: 1 (should never need to set this to 0)
1130#define REMOVE_UNUSED_ARG 1
1131
1132// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
1133// them. Set to 1 for <iostream.h>, 0 for <iostream>
1134//
1135// Default is 1.
1136//
1137// Recommended setting: whatever your compiler likes more
1138#ifdef __MWERKS__
1139 #define wxUSE_IOSTREAMH 1
1140#else
1141 #define wxUSE_IOSTREAMH 0
1142#endif
1143
1144// ----------------------------------------------------------------------------
1145// image format support
1146// ----------------------------------------------------------------------------
1147
1148// wxImage supports many different image formats which can be configured at
1149// compile-time. BMP is always supported, others are optional and can be safely
1150// disabled if you don't plan to use images in such format sometimes saving
1151// substantial amount of code in the final library.
1152//
1153// Some formats require an extra library which is included in wxWin sources
1154// which is mentioned if it is the case.
1155
1156// Set to 1 for wxImage support (recommended).
1157#define wxUSE_IMAGE 1
1158
1159// Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
1160#define wxUSE_LIBPNG 1
1161
1162// Set to 1 for JPEG format support (requires libjpeg)
1163#define wxUSE_LIBJPEG 1
1164
1165// Set to 1 for TIFF format support (requires libtiff)
1166#define wxUSE_LIBTIFF 1
1167
1168// Set to 1 for GIF format support
1169#define wxUSE_GIF 1
1170
1171// Set to 1 for PNM format support
1172#define wxUSE_PNM 1
1173
1174// Set to 1 for PCX format support
1175#define wxUSE_PCX 1
1176
1177// Set to 1 for IFF format support (Amiga format)
1178#define wxUSE_IFF 0
1179
1180// Set to 1 for XPM format support
1181#define wxUSE_XPM 1
1182
1183// Set to 1 for MS Icons and Cursors format support
1184#define wxUSE_ICO_CUR 0
1185
1186// Set to 1 to compile in wxPalette class
715d7d25 1187 #define wxUSE_PALETTE 1
2b5f62a0
VZ
1188
1189// ----------------------------------------------------------------------------
1190// Windows-only settings
1191// ----------------------------------------------------------------------------
1192#if defined(__WINDOWS__)
1193
77ffb593 1194// Set this to 1 if you want to use wxWidgets and MFC in the same program. This
2b5f62a0
VZ
1195// will override some other settings (see below)
1196//
1197// Default is 0.
1198//
1199// Recommended setting: 0 unless you really have to use MFC
1200#define wxUSE_MFC 0
1201
1202// Set this to 1 for generic OLE support: this is required for drag-and-drop,
1203// clipboard, OLE Automation. Only set it to 0 if your compiler is very old and
1204// can't compile/doesn't have the OLE headers.
1205//
1206// Default is 1.
1207//
5cdff299 1208// Recommended setting: 1 for WIN32
5cdff299 1209 #define wxUSE_OLE 1
2b5f62a0 1210
e6bdaaad
MW
1211// Set to 0 to disable PostScript print/preview architecture code under Windows
1212// (just use Windows printing).
1213#if defined(__WIN32__)
1214 #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
1215#else
1216 #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 0
1217#endif
1218
2b5f62a0
VZ
1219// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
1220// which allows to put more than ~32Kb of text in it even under Win9x (NT
1221// doesn't have such limitation).
1222//
1223// Default is 1 for compilers which support it
1224//
1225// Recommended setting: 1, only set it to 0 if your compiler doesn't have
1226// or can't compile <richedit.h>
b39dbf34 1227#if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__)
2b5f62a0
VZ
1228// TODO: This should be ifdef'ed for any compilers that don't support
1229// RichEdit 2.0 but do have RichEdit 1.0...
5cdff299
JS
1230 #define wxUSE_RICHEDIT 0 // currently not supported
1231 #define wxUSE_RICHEDIT2 0 // currently not supported
2b5f62a0
VZ
1232
1233#else
1234 #define wxUSE_RICHEDIT 0
1235 #define wxUSE_RICHEDIT2 0
1236#endif
1237
ea5ef76f 1238// Set this to 1 to enable support for the owner-drawn menu and listboxes.
2b5f62a0
VZ
1239//
1240// Default is 1.
1241//
1242// Recommended setting: 1, set to 0 for a small library size reduction
ea5ef76f 1243#define wxUSE_OWNER_DRAWN 0
2b5f62a0 1244
ee64d4f3
MW
1245// Set this to 1 to be able to use wxCrashReport::Generate() to create mini
1246// dumps of your program when it crashes (or at any other moment)
1247//
1248// Default is 1 if supported by the compiler (VC++ and recent BC++ only).
1249//
1250// Recommended setting: 1, set to 0 if your programs never crash
1251#define wxUSE_CRASHREPORT 1
1252
2b5f62a0
VZ
1253#endif
1254
2b5f62a0
VZ
1255// ----------------------------------------------------------------------------
1256// unknown settings
1257// ----------------------------------------------------------------------------
1258
2b5f62a0
VZ
1259// If 1, enables provision of run-time type information.
1260// NOW MANDATORY: don't change.
1261#define wxUSE_DYNAMIC_CLASSES 1
1262
2b5f62a0
VZ
1263//??????
1264#if defined(__WIN32__)
1265 #define wxUSE_DDE_FOR_IPC 0
1266#else
1267 #define wxUSE_DDE_FOR_IPC 0
1268#endif
1269
2b5f62a0 1270#endif // _WX_UNIV_SETUP_H_