X-Git-Url: https://git.saurik.com/redis.git/blobdiff_plain/f15e33a884e45923a104ac4bfb230199e2a2f443..18aa2b87b6db7fa79b0596590aa385adcbc64e53:/redis.conf?ds=sidebyside diff --git a/redis.conf b/redis.conf index fdabda06..5a85a4ea 100644 --- a/redis.conf +++ b/redis.conf @@ -1,6 +1,6 @@ # Redis configuration file example -# Note on units: when memory size is needed, it is possible to specifiy +# Note on units: when memory size is needed, it is possible to specify # it in the usual form of 1k 5GB 4M and so forth: # # 1k => 1000 bytes @@ -37,7 +37,7 @@ port 6379 # unixsocketperm 755 # Close the connection after a client is idle for N seconds (0 to disable) -timeout 300 +timeout 0 # Set server verbosity to 'debug' # it can be one of: @@ -45,7 +45,7 @@ timeout 300 # verbose (many rarely useful info, but not a mess like the debug level) # notice (moderately verbose, what you want in production probably) # warning (only very important / critical messages are logged) -loglevel verbose +loglevel notice # Specify the log file name. Also 'stdout' can be used to force # Redis to log on the standard output. Note that if you use standard @@ -82,6 +82,12 @@ databases 16 # after 60 sec if at least 10000 keys changed # # Note: you can disable saving at all commenting all the "save" lines. +# +# It is also possible to remove all the previously configured save +# points by adding a save directive with a single empty string argument +# like in the following example: +# +# save "" save 900 1 save 300 10 @@ -126,7 +132,7 @@ dir ./ # is still in progress, the slave can act in two different ways: # # 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will -# still reply to client requests, possibly with out of data data, or the +# still reply to client requests, possibly with out of date data, or the # data set may just be empty if this is the first synchronization. # # 2) if slave-serve-stale data is set to 'no' the slave will reply with @@ -144,6 +150,10 @@ slave-serve-stale-data yes # The following option sets a timeout for both Bulk transfer I/O timeout and # master data or ping response timeout. The default value is 60 seconds. # +# It is important to make sure that this value is greater than the value +# specified for repl-ping-slave-period otherwise a timeout will be detected +# every time there is low traffic between the master and the slave. +# # repl-timeout 60 ################################## SECURITY ################################### @@ -163,7 +173,7 @@ slave-serve-stale-data yes # Command renaming. # -# It is possilbe to change the name of dangerous commands in a shared +# It is possible to change the name of dangerous commands in a shared # environment. For instance the CONFIG command may be renamed into something # of hard to guess so that it will be still available for internal-use # tools but not available for general clients. @@ -172,7 +182,7 @@ slave-serve-stale-data yes # # rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52 # -# It is also possilbe to completely kill a command renaming it into +# It is also possible to completely kill a command renaming it into # an empty string: # # rename-command CONFIG "" @@ -275,7 +285,7 @@ appendonly no # # The default is "everysec" that's usually the right compromise between # speed and data safety. It's up to you to understand if you can relax this to -# "no" that will will let the operating system flush the output buffer when +# "no" that will let the operating system flush the output buffer when # it wants, for better performances (but if you can live with the idea of # some data loss consider the default persistence mode that's snapshotting), # or on the contrary, use "always" that's very slow but a bit safer than @@ -299,7 +309,7 @@ appendfsync everysec # BGSAVE or BGREWRITEAOF is in progress. # # This means that while another child is saving the durability of Redis is -# the same as "appendfsync none", that in pratical terms means that it is +# the same as "appendfsync none", that in practical terms means that it is # possible to lost up to 30 seconds of log in the worst scenario (with the # default Linux settings). # @@ -321,7 +331,7 @@ no-appendfsync-on-rewrite no # is useful to avoid rewriting the AOF file even if the percentage increase # is reached but it is still pretty small. # -# Specify a precentage of zero in order to disable the automatic AOF +# Specify a percentage of zero in order to disable the automatic AOF # rewrite feature. auto-aof-rewrite-percentage 100 @@ -332,11 +342,15 @@ auto-aof-rewrite-min-size 64mb # Max execution time of a Lua script in milliseconds. # # If the maximum execution time is reached Redis will log that a script is -# still in execution after the maxium allowed time and will start to +# still in execution after the maximum allowed time and will start to # reply to queries with an error. # -# The SHUTDOWN command will be available to shutdown the server without -# violating the database consistency if the script entered an infinite loop. +# When a long running script exceed the maximum execution time only the +# SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be +# used to stop a script that did not yet called write commands. The second +# is the only way to shut down the server in the case a write commands was +# already issue by the script but the user don't want to wait for the natural +# termination of the script. # # Set it to 0 or a negative value for unlimited execution without warnings. lua-time-limit 5000 @@ -387,7 +401,7 @@ slowlog-max-len 1024 ############################### ADVANCED CONFIG ############################### # Hashes are encoded in a special way (much more memory efficient) when they -# have at max a given numer of elements, and the biggest element does not +# have at max a given number of elements, and the biggest element does not # exceed a given threshold. You can configure this limits with the following # configuration directives. hash-max-zipmap-entries 512 @@ -414,9 +428,9 @@ zset-max-ziplist-value 64 # Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in # order to help rehashing the main Redis hash table (the one mapping top-level -# keys to values). The hash table implementation redis uses (see dict.c) +# keys to values). The hash table implementation Redis uses (see dict.c) # performs a lazy rehashing: the more operation you run into an hash table -# that is rhashing, the more rehashing "steps" are performed, so if the +# that is rehashing, the more rehashing "steps" are performed, so if the # server is idle the rehashing is never complete and some more memory is used # by the hash table. # @@ -432,10 +446,47 @@ zset-max-ziplist-value 64 # want to free memory asap when possible. activerehashing yes +# The client output buffer limits can be used to force disconnection of clients +# that are not reading data from the server fast enough for some reason (a +# common reason is that a Pub/Sub client can't consume messages as fast as the +# publisher can produce them). +# +# The limit can be set differently for the three different classes of clients: +# +# normal -> normal clients +# slave -> slave clients and MONITOR clients +# pubsub -> clients subcribed to at least one pubsub channel or pattern +# +# The syntax of every client-output-buffer-limit directive is the following: +# +# client-output-buffer-limit +# +# A client is immediately disconnected once the hard limit is reached, or if +# the soft limit is reached and remains reached for the specified number of +# seconds (continuously). +# So for instance if the hard limit is 32 megabytes and the soft limit is +# 16 megabytes / 10 seconds, the client will get disconnected immediately +# if the size of the output buffers reach 32 megabytes, but will also get +# disconnected if the client reaches 16 megabytes and continuously overcomes +# the limit for 10 seconds. +# +# By default normal clients are not limited because they don't receive data +# without asking (in a push way), but just after a request, so only +# asynchronous clients may create a scenario where data is requested faster +# than it can read. +# +# Instead there is a default limit for pubsub and slave clients, since +# subscribers and slaves receive data in a push fashion. +# +# Both the hard or the soft limit can be disabled just setting it to zero. +client-output-buffer-limit normal 0 0 0 +client-output-buffer-limit slave 256mb 64mb 60 +client-output-buffer-limit pubsub 32mb 8mb 60 + ################################## INCLUDES ################################### # Include one or more other config files here. This is useful if you -# have a standard template that goes to all redis server but also need +# have a standard template that goes to all Redis server but also need # to customize a few per-server settings. Include files can include # other files, so use this wisely. #