X-Git-Url: https://git.saurik.com/redis.git/blobdiff_plain/ed329fcf25bb1c41949678eec125034326f86af2..18aa2b87b6db7fa79b0596590aa385adcbc64e53:/redis.conf?ds=sidebyside diff --git a/redis.conf b/redis.conf index 3727efd5..5a85a4ea 100644 --- a/redis.conf +++ b/redis.conf @@ -1,24 +1,74 @@ # Redis configuration file example +# Note on units: when memory size is needed, it is possible to specify +# it in the usual form of 1k 5GB 4M and so forth: +# +# 1k => 1000 bytes +# 1kb => 1024 bytes +# 1m => 1000000 bytes +# 1mb => 1024*1024 bytes +# 1g => 1000000000 bytes +# 1gb => 1024*1024*1024 bytes +# +# units are case insensitive so 1GB 1Gb 1gB are all the same. + # By default Redis does not run as a daemon. Use 'yes' if you need it. # Note that Redis will write a pid file in /var/run/redis.pid when daemonized. daemonize no -# When run as a daemon, Redis write a pid file in /var/run/redis.pid by default. -# You can specify a custom pid file location here. +# When running daemonized, Redis writes a pid file in /var/run/redis.pid by +# default. You can specify a custom pid file location here. pidfile /var/run/redis.pid -# Accept connections on the specified port, default is 6379 +# Accept connections on the specified port, default is 6379. +# If port 0 is specified Redis will not listen on a TCP socket. port 6379 # If you want you can bind a single interface, if the bind option is not -# specified all the interfaces will listen for connections. +# specified all the interfaces will listen for incoming connections. # # bind 127.0.0.1 -# Close the connection after a client is idle for N seconds -timeout 300 +# Specify the path for the unix socket that will be used to listen for +# incoming connections. There is no default, so Redis will not listen +# on a unix socket when not specified. +# +# unixsocket /tmp/redis.sock +# unixsocketperm 755 + +# Close the connection after a client is idle for N seconds (0 to disable) +timeout 0 + +# Set server verbosity to 'debug' +# it can be one of: +# debug (a lot of information, useful for development/testing) +# verbose (many rarely useful info, but not a mess like the debug level) +# notice (moderately verbose, what you want in production probably) +# warning (only very important / critical messages are logged) +loglevel notice + +# Specify the log file name. Also 'stdout' can be used to force +# Redis to log on the standard output. Note that if you use standard +# output for logging but daemonize, logs will be sent to /dev/null +logfile stdout + +# To enable logging to the system logger, just set 'syslog-enabled' to yes, +# and optionally update the other syslog parameters to suit your needs. +# syslog-enabled no +# Specify the syslog identity. +# syslog-ident redis + +# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7. +# syslog-facility local0 + +# Set the number of databases. The default database is DB 0, you can select +# a different one on a per-connection basis using SELECT where +# dbid is a number between 0 and 'databases'-1 +databases 16 + +################################ SNAPSHOTTING ################################# +# # Save the DB on disk: # # save @@ -30,28 +80,37 @@ timeout 300 # after 900 sec (15 min) if at least 1 key changed # after 300 sec (5 min) if at least 10 keys changed # after 60 sec if at least 10000 keys changed +# +# Note: you can disable saving at all commenting all the "save" lines. +# +# It is also possible to remove all the previously configured save +# points by adding a save directive with a single empty string argument +# like in the following example: +# +# save "" + save 900 1 save 300 10 save 60 10000 -# For default save/load DB in/from the working directory -# Note that you must specify a directory not a file name. -dir ./ - -# Set server verbosity to 'debug' -# it can be one of: -# debug (a lot of information, useful for development/testing) -# notice (moderately verbose, what you want in production probably) -# warning (only very important / critical messages are logged) -loglevel debug +# Compress string objects using LZF when dump .rdb databases? +# For default that's set to 'yes' as it's almost always a win. +# If you want to save some CPU in the saving child set it to 'no' but +# the dataset will likely be bigger if you have compressible values or keys. +rdbcompression yes -# Specify the log file name. Also 'stdout' can be used to force -# the demon to log on the standard output. Note that if you use standard -# output for logging but daemonize, logs will be sent to /dev/null -logfile stdout +# The filename where to dump the DB +dbfilename dump.rdb -# Set the number of databases. -databases 16 +# The working directory. +# +# The DB will be written inside this directory, with the filename specified +# above using the 'dbfilename' configuration directive. +# +# Also the Append Only File will be created inside this directory. +# +# Note that you must specify a directory here, not a file name. +dir ./ ################################# REPLICATION ################################# @@ -59,12 +118,377 @@ databases 16 # another Redis server. Note that the configuration is local to the slave # so for example it is possible to configure the slave to save the DB with a # different interval, or to listen to another port, and so on. - +# # slaveof +# If the master is password protected (using the "requirepass" configuration +# directive below) it is possible to tell the slave to authenticate before +# starting the replication synchronization process, otherwise the master will +# refuse the slave request. +# +# masterauth + +# When a slave lost the connection with the master, or when the replication +# is still in progress, the slave can act in two different ways: +# +# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will +# still reply to client requests, possibly with out of date data, or the +# data set may just be empty if this is the first synchronization. +# +# 2) if slave-serve-stale data is set to 'no' the slave will reply with +# an error "SYNC with master in progress" to all the kind of commands +# but to INFO and SLAVEOF. +# +slave-serve-stale-data yes + +# Slaves send PINGs to server in a predefined interval. It's possible to change +# this interval with the repl_ping_slave_period option. The default value is 10 +# seconds. +# +# repl-ping-slave-period 10 + +# The following option sets a timeout for both Bulk transfer I/O timeout and +# master data or ping response timeout. The default value is 60 seconds. +# +# It is important to make sure that this value is greater than the value +# specified for repl-ping-slave-period otherwise a timeout will be detected +# every time there is low traffic between the master and the slave. +# +# repl-timeout 60 + +################################## SECURITY ################################### + +# Require clients to issue AUTH before processing any other +# commands. This might be useful in environments in which you do not trust +# others with access to the host running redis-server. +# +# This should stay commented out for backward compatibility and because most +# people do not need auth (e.g. they run their own servers). +# +# Warning: since Redis is pretty fast an outside user can try up to +# 150k passwords per second against a good box. This means that you should +# use a very strong password otherwise it will be very easy to break. +# +# requirepass foobared + +# Command renaming. +# +# It is possible to change the name of dangerous commands in a shared +# environment. For instance the CONFIG command may be renamed into something +# of hard to guess so that it will be still available for internal-use +# tools but not available for general clients. +# +# Example: +# +# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52 +# +# It is also possible to completely kill a command renaming it into +# an empty string: +# +# rename-command CONFIG "" + +################################### LIMITS #################################### + +# Set the max number of connected clients at the same time. By default +# this limit is set to 10000 clients, however if the Redis server is not +# able ot configure the process file limit to allow for the specified limit +# the max number of allowed clients is set to the current file limit +# minus 32 (as Redis reserves a few file descriptors for internal uses). +# +# Once the limit is reached Redis will close all the new connections sending +# an error 'max number of clients reached'. +# +# maxclients 10000 + +# Don't use more memory than the specified amount of bytes. +# When the memory limit is reached Redis will try to remove keys with an +# EXPIRE set. It will try to start freeing keys that are going to expire +# in little time and preserve keys with a longer time to live. +# Redis will also try to remove objects from free lists if possible. +# +# If all this fails, Redis will start to reply with errors to commands +# that will use more memory, like SET, LPUSH, and so on, and will continue +# to reply to most read-only commands like GET. +# +# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a +# 'state' server or cache, not as a real DB. When Redis is used as a real +# database the memory usage will grow over the weeks, it will be obvious if +# it is going to use too much memory in the long run, and you'll have the time +# to upgrade. With maxmemory after the limit is reached you'll start to get +# errors for write operations, and this may even lead to DB inconsistency. +# +# maxmemory + +# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory +# is reached? You can select among five behavior: +# +# volatile-lru -> remove the key with an expire set using an LRU algorithm +# allkeys-lru -> remove any key accordingly to the LRU algorithm +# volatile-random -> remove a random key with an expire set +# allkeys->random -> remove a random key, any key +# volatile-ttl -> remove the key with the nearest expire time (minor TTL) +# noeviction -> don't expire at all, just return an error on write operations +# +# Note: with all the kind of policies, Redis will return an error on write +# operations, when there are not suitable keys for eviction. +# +# At the date of writing this commands are: set setnx setex append +# incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd +# sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby +# zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby +# getset mset msetnx exec sort +# +# The default is: +# +# maxmemory-policy volatile-lru + +# LRU and minimal TTL algorithms are not precise algorithms but approximated +# algorithms (in order to save memory), so you can select as well the sample +# size to check. For instance for default Redis will check three keys and +# pick the one that was used less recently, you can change the sample size +# using the following configuration directive. +# +# maxmemory-samples 3 + +############################## APPEND ONLY MODE ############################### + +# By default Redis asynchronously dumps the dataset on disk. If you can live +# with the idea that the latest records will be lost if something like a crash +# happens this is the preferred way to run Redis. If instead you care a lot +# about your data and don't want to that a single record can get lost you should +# enable the append only mode: when this mode is enabled Redis will append +# every write operation received in the file appendonly.aof. This file will +# be read on startup in order to rebuild the full dataset in memory. +# +# Note that you can have both the async dumps and the append only file if you +# like (you have to comment the "save" statements above to disable the dumps). +# Still if append only mode is enabled Redis will load the data from the +# log file at startup ignoring the dump.rdb file. +# +# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append +# log file in background when it gets too big. + +appendonly no + +# The name of the append only file (default: "appendonly.aof") +# appendfilename appendonly.aof + +# The fsync() call tells the Operating System to actually write data on disk +# instead to wait for more data in the output buffer. Some OS will really flush +# data on disk, some other OS will just try to do it ASAP. +# +# Redis supports three different modes: +# +# no: don't fsync, just let the OS flush the data when it wants. Faster. +# always: fsync after every write to the append only log . Slow, Safest. +# everysec: fsync only if one second passed since the last fsync. Compromise. +# +# The default is "everysec" that's usually the right compromise between +# speed and data safety. It's up to you to understand if you can relax this to +# "no" that will let the operating system flush the output buffer when +# it wants, for better performances (but if you can live with the idea of +# some data loss consider the default persistence mode that's snapshotting), +# or on the contrary, use "always" that's very slow but a bit safer than +# everysec. +# +# If unsure, use "everysec". + +# appendfsync always +appendfsync everysec +# appendfsync no + +# When the AOF fsync policy is set to always or everysec, and a background +# saving process (a background save or AOF log background rewriting) is +# performing a lot of I/O against the disk, in some Linux configurations +# Redis may block too long on the fsync() call. Note that there is no fix for +# this currently, as even performing fsync in a different thread will block +# our synchronous write(2) call. +# +# In order to mitigate this problem it's possible to use the following option +# that will prevent fsync() from being called in the main process while a +# BGSAVE or BGREWRITEAOF is in progress. +# +# This means that while another child is saving the durability of Redis is +# the same as "appendfsync none", that in practical terms means that it is +# possible to lost up to 30 seconds of log in the worst scenario (with the +# default Linux settings). +# +# If you have latency problems turn this to "yes". Otherwise leave it as +# "no" that is the safest pick from the point of view of durability. +no-appendfsync-on-rewrite no + +# Automatic rewrite of the append only file. +# Redis is able to automatically rewrite the log file implicitly calling +# BGREWRITEAOF when the AOF log size will growth by the specified percentage. +# +# This is how it works: Redis remembers the size of the AOF file after the +# latest rewrite (or if no rewrite happened since the restart, the size of +# the AOF at startup is used). +# +# This base size is compared to the current size. If the current size is +# bigger than the specified percentage, the rewrite is triggered. Also +# you need to specify a minimal size for the AOF file to be rewritten, this +# is useful to avoid rewriting the AOF file even if the percentage increase +# is reached but it is still pretty small. +# +# Specify a percentage of zero in order to disable the automatic AOF +# rewrite feature. + +auto-aof-rewrite-percentage 100 +auto-aof-rewrite-min-size 64mb + +################################ LUA SCRIPTING ############################### + +# Max execution time of a Lua script in milliseconds. +# +# If the maximum execution time is reached Redis will log that a script is +# still in execution after the maximum allowed time and will start to +# reply to queries with an error. +# +# When a long running script exceed the maximum execution time only the +# SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be +# used to stop a script that did not yet called write commands. The second +# is the only way to shut down the server in the case a write commands was +# already issue by the script but the user don't want to wait for the natural +# termination of the script. +# +# Set it to 0 or a negative value for unlimited execution without warnings. +lua-time-limit 5000 + +################################ REDIS CLUSTER ############################### +# +# Normal Redis instances can't be part of a Redis Cluster, only nodes that are +# started as cluster nodes can. In order to start a Redis instance as a +# cluster node enable the cluster support uncommenting the following: +# +# cluster-enabled yes + +# Every cluster node has a cluster configuration file. This file is not +# intended to be edited by hand. It is created and updated by Redis nodes. +# Every Redis Cluster node requires a different cluster configuration file. +# Make sure that instances running in the same system does not have +# overlapping cluster configuration file names. +# +# cluster-config-file nodes-6379.conf + +# In order to setup your cluster make sure to read the documentation +# available at http://redis.io web site. + +################################## SLOW LOG ################################### + +# The Redis Slow Log is a system to log queries that exceeded a specified +# execution time. The execution time does not include the I/O operations +# like talking with the client, sending the reply and so forth, +# but just the time needed to actually execute the command (this is the only +# stage of command execution where the thread is blocked and can not serve +# other requests in the meantime). +# +# You can configure the slow log with two parameters: one tells Redis +# what is the execution time, in microseconds, to exceed in order for the +# command to get logged, and the other parameter is the length of the +# slow log. When a new command is logged the oldest one is removed from the +# queue of logged commands. + +# The following time is expressed in microseconds, so 1000000 is equivalent +# to one second. Note that a negative number disables the slow log, while +# a value of zero forces the logging of every command. +slowlog-log-slower-than 10000 + +# There is no limit to this length. Just be aware that it will consume memory. +# You can reclaim memory used by the slow log with SLOWLOG RESET. +slowlog-max-len 1024 + ############################### ADVANCED CONFIG ############################### -# Glue small output buffers together in order to send small replies in a -# single TCP packet. Uses a bit more CPU but most of the times it is a win -# in terms of number of queries per second. Use 'yes' if unsure. -glueoutputbuf yes +# Hashes are encoded in a special way (much more memory efficient) when they +# have at max a given number of elements, and the biggest element does not +# exceed a given threshold. You can configure this limits with the following +# configuration directives. +hash-max-zipmap-entries 512 +hash-max-zipmap-value 64 + +# Similarly to hashes, small lists are also encoded in a special way in order +# to save a lot of space. The special representation is only used when +# you are under the following limits: +list-max-ziplist-entries 512 +list-max-ziplist-value 64 + +# Sets have a special encoding in just one case: when a set is composed +# of just strings that happens to be integers in radix 10 in the range +# of 64 bit signed integers. +# The following configuration setting sets the limit in the size of the +# set in order to use this special memory saving encoding. +set-max-intset-entries 512 + +# Similarly to hashes and lists, sorted sets are also specially encoded in +# order to save a lot of space. This encoding is only used when the length and +# elements of a sorted set are below the following limits: +zset-max-ziplist-entries 128 +zset-max-ziplist-value 64 + +# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in +# order to help rehashing the main Redis hash table (the one mapping top-level +# keys to values). The hash table implementation Redis uses (see dict.c) +# performs a lazy rehashing: the more operation you run into an hash table +# that is rehashing, the more rehashing "steps" are performed, so if the +# server is idle the rehashing is never complete and some more memory is used +# by the hash table. +# +# The default is to use this millisecond 10 times every second in order to +# active rehashing the main dictionaries, freeing memory when possible. +# +# If unsure: +# use "activerehashing no" if you have hard latency requirements and it is +# not a good thing in your environment that Redis can reply form time to time +# to queries with 2 milliseconds delay. +# +# use "activerehashing yes" if you don't have such hard requirements but +# want to free memory asap when possible. +activerehashing yes + +# The client output buffer limits can be used to force disconnection of clients +# that are not reading data from the server fast enough for some reason (a +# common reason is that a Pub/Sub client can't consume messages as fast as the +# publisher can produce them). +# +# The limit can be set differently for the three different classes of clients: +# +# normal -> normal clients +# slave -> slave clients and MONITOR clients +# pubsub -> clients subcribed to at least one pubsub channel or pattern +# +# The syntax of every client-output-buffer-limit directive is the following: +# +# client-output-buffer-limit +# +# A client is immediately disconnected once the hard limit is reached, or if +# the soft limit is reached and remains reached for the specified number of +# seconds (continuously). +# So for instance if the hard limit is 32 megabytes and the soft limit is +# 16 megabytes / 10 seconds, the client will get disconnected immediately +# if the size of the output buffers reach 32 megabytes, but will also get +# disconnected if the client reaches 16 megabytes and continuously overcomes +# the limit for 10 seconds. +# +# By default normal clients are not limited because they don't receive data +# without asking (in a push way), but just after a request, so only +# asynchronous clients may create a scenario where data is requested faster +# than it can read. +# +# Instead there is a default limit for pubsub and slave clients, since +# subscribers and slaves receive data in a push fashion. +# +# Both the hard or the soft limit can be disabled just setting it to zero. +client-output-buffer-limit normal 0 0 0 +client-output-buffer-limit slave 256mb 64mb 60 +client-output-buffer-limit pubsub 32mb 8mb 60 + +################################## INCLUDES ################################### + +# Include one or more other config files here. This is useful if you +# have a standard template that goes to all Redis server but also need +# to customize a few per-server settings. Include files can include +# other files, so use this wisely. +# +# include /path/to/local.conf +# include /path/to/other.conf