X-Git-Url: https://git.saurik.com/redis.git/blobdiff_plain/b8cfcea4243ef22537bdfefe73fd6c54fc41ee70..d1c4c94ebf918b908691ab7f58f872b04d93f3f9:/redis.conf?ds=sidebyside diff --git a/redis.conf b/redis.conf index 407d102b..5a85a4ea 100644 --- a/redis.conf +++ b/redis.conf @@ -1,6 +1,6 @@ # Redis configuration file example -# Note on units: when memory size is needed, it is possible to specifiy +# Note on units: when memory size is needed, it is possible to specify # it in the usual form of 1k 5GB 4M and so forth: # # 1k => 1000 bytes @@ -21,6 +21,7 @@ daemonize no pidfile /var/run/redis.pid # Accept connections on the specified port, default is 6379. +# If port 0 is specified Redis will not listen on a TCP socket. port 6379 # If you want you can bind a single interface, if the bind option is not @@ -33,9 +34,10 @@ port 6379 # on a unix socket when not specified. # # unixsocket /tmp/redis.sock +# unixsocketperm 755 # Close the connection after a client is idle for N seconds (0 to disable) -timeout 300 +timeout 0 # Set server verbosity to 'debug' # it can be one of: @@ -43,7 +45,7 @@ timeout 300 # verbose (many rarely useful info, but not a mess like the debug level) # notice (moderately verbose, what you want in production probably) # warning (only very important / critical messages are logged) -loglevel verbose +loglevel notice # Specify the log file name. Also 'stdout' can be used to force # Redis to log on the standard output. Note that if you use standard @@ -80,6 +82,12 @@ databases 16 # after 60 sec if at least 10000 keys changed # # Note: you can disable saving at all commenting all the "save" lines. +# +# It is also possible to remove all the previously configured save +# points by adding a save directive with a single empty string argument +# like in the following example: +# +# save "" save 900 1 save 300 10 @@ -124,7 +132,7 @@ dir ./ # is still in progress, the slave can act in two different ways: # # 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will -# still reply to client requests, possibly with out of data data, or the +# still reply to client requests, possibly with out of date data, or the # data set may just be empty if this is the first synchronization. # # 2) if slave-serve-stale data is set to 'no' the slave will reply with @@ -133,6 +141,21 @@ dir ./ # slave-serve-stale-data yes +# Slaves send PINGs to server in a predefined interval. It's possible to change +# this interval with the repl_ping_slave_period option. The default value is 10 +# seconds. +# +# repl-ping-slave-period 10 + +# The following option sets a timeout for both Bulk transfer I/O timeout and +# master data or ping response timeout. The default value is 60 seconds. +# +# It is important to make sure that this value is greater than the value +# specified for repl-ping-slave-period otherwise a timeout will be detected +# every time there is low traffic between the master and the slave. +# +# repl-timeout 60 + ################################## SECURITY ################################### # Require clients to issue AUTH before processing any other @@ -150,7 +173,7 @@ slave-serve-stale-data yes # Command renaming. # -# It is possilbe to change the name of dangerous commands in a shared +# It is possible to change the name of dangerous commands in a shared # environment. For instance the CONFIG command may be renamed into something # of hard to guess so that it will be still available for internal-use # tools but not available for general clients. @@ -159,20 +182,23 @@ slave-serve-stale-data yes # # rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52 # -# It is also possilbe to completely kill a command renaming it into +# It is also possible to completely kill a command renaming it into # an empty string: # # rename-command CONFIG "" ################################### LIMITS #################################### -# Set the max number of connected clients at the same time. By default there -# is no limit, and it's up to the number of file descriptors the Redis process -# is able to open. The special value '0' means no limits. +# Set the max number of connected clients at the same time. By default +# this limit is set to 10000 clients, however if the Redis server is not +# able ot configure the process file limit to allow for the specified limit +# the max number of allowed clients is set to the current file limit +# minus 32 (as Redis reserves a few file descriptors for internal uses). +# # Once the limit is reached Redis will close all the new connections sending # an error 'max number of clients reached'. # -# maxclients 128 +# maxclients 10000 # Don't use more memory than the specified amount of bytes. # When the memory limit is reached Redis will try to remove keys with an @@ -259,7 +285,7 @@ appendonly no # # The default is "everysec" that's usually the right compromise between # speed and data safety. It's up to you to understand if you can relax this to -# "no" that will will let the operating system flush the output buffer when +# "no" that will let the operating system flush the output buffer when # it wants, for better performances (but if you can live with the idea of # some data loss consider the default persistence mode that's snapshotting), # or on the contrary, use "always" that's very slow but a bit safer than @@ -283,7 +309,7 @@ appendfsync everysec # BGSAVE or BGREWRITEAOF is in progress. # # This means that while another child is saving the durability of Redis is -# the same as "appendfsync none", that in pratical terms means that it is +# the same as "appendfsync none", that in practical terms means that it is # possible to lost up to 30 seconds of log in the worst scenario (with the # default Linux settings). # @@ -291,36 +317,91 @@ appendfsync everysec # "no" that is the safest pick from the point of view of durability. no-appendfsync-on-rewrite no -#################################### DISK STORE ############################### +# Automatic rewrite of the append only file. +# Redis is able to automatically rewrite the log file implicitly calling +# BGREWRITEAOF when the AOF log size will growth by the specified percentage. +# +# This is how it works: Redis remembers the size of the AOF file after the +# latest rewrite (or if no rewrite happened since the restart, the size of +# the AOF at startup is used). +# +# This base size is compared to the current size. If the current size is +# bigger than the specified percentage, the rewrite is triggered. Also +# you need to specify a minimal size for the AOF file to be rewritten, this +# is useful to avoid rewriting the AOF file even if the percentage increase +# is reached but it is still pretty small. +# +# Specify a percentage of zero in order to disable the automatic AOF +# rewrite feature. + +auto-aof-rewrite-percentage 100 +auto-aof-rewrite-min-size 64mb -# When disk store is active Redis works as an on-disk database, where memory -# is only used as a object cache. +################################ LUA SCRIPTING ############################### + +# Max execution time of a Lua script in milliseconds. +# +# If the maximum execution time is reached Redis will log that a script is +# still in execution after the maximum allowed time and will start to +# reply to queries with an error. # -# This mode is good for datasets that are bigger than memory, and in general -# when you want to trade speed for: +# When a long running script exceed the maximum execution time only the +# SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be +# used to stop a script that did not yet called write commands. The second +# is the only way to shut down the server in the case a write commands was +# already issue by the script but the user don't want to wait for the natural +# termination of the script. +# +# Set it to 0 or a negative value for unlimited execution without warnings. +lua-time-limit 5000 + +################################ REDIS CLUSTER ############################### # -# - less memory used -# - immediate server restart -# - per key durability, without need for backgrond savig +# Normal Redis instances can't be part of a Redis Cluster, only nodes that are +# started as cluster nodes can. In order to start a Redis instance as a +# cluster node enable the cluster support uncommenting the following: # -# On the other hand, with disk store enabled MULTI/EXEC are no longer -# transactional from the point of view of the persistence on disk, that is, -# Redis transactions will still guarantee that commands are either processed -# all or nothing, but there is no guarantee that all the keys are flushed -# on disk in an atomic way. +# cluster-enabled yes + +# Every cluster node has a cluster configuration file. This file is not +# intended to be edited by hand. It is created and updated by Redis nodes. +# Every Redis Cluster node requires a different cluster configuration file. +# Make sure that instances running in the same system does not have +# overlapping cluster configuration file names. # -# Of course with disk store enabled Redis is not as fast as it is when -# working with just the memory back end. +# cluster-config-file nodes-6379.conf + +# In order to setup your cluster make sure to read the documentation +# available at http://redis.io web site. + +################################## SLOW LOG ################################### + +# The Redis Slow Log is a system to log queries that exceeded a specified +# execution time. The execution time does not include the I/O operations +# like talking with the client, sending the reply and so forth, +# but just the time needed to actually execute the command (this is the only +# stage of command execution where the thread is blocked and can not serve +# other requests in the meantime). +# +# You can configure the slow log with two parameters: one tells Redis +# what is the execution time, in microseconds, to exceed in order for the +# command to get logged, and the other parameter is the length of the +# slow log. When a new command is logged the oldest one is removed from the +# queue of logged commands. + +# The following time is expressed in microseconds, so 1000000 is equivalent +# to one second. Note that a negative number disables the slow log, while +# a value of zero forces the logging of every command. +slowlog-log-slower-than 10000 -diskstore-enabled no -diskstore-path redis.ds -cache-max-memory 0 -cache-flush-delay 0 +# There is no limit to this length. Just be aware that it will consume memory. +# You can reclaim memory used by the slow log with SLOWLOG RESET. +slowlog-max-len 1024 ############################### ADVANCED CONFIG ############################### # Hashes are encoded in a special way (much more memory efficient) when they -# have at max a given numer of elements, and the biggest element does not +# have at max a given number of elements, and the biggest element does not # exceed a given threshold. You can configure this limits with the following # configuration directives. hash-max-zipmap-entries 512 @@ -339,11 +420,17 @@ list-max-ziplist-value 64 # set in order to use this special memory saving encoding. set-max-intset-entries 512 +# Similarly to hashes and lists, sorted sets are also specially encoded in +# order to save a lot of space. This encoding is only used when the length and +# elements of a sorted set are below the following limits: +zset-max-ziplist-entries 128 +zset-max-ziplist-value 64 + # Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in # order to help rehashing the main Redis hash table (the one mapping top-level -# keys to values). The hash table implementation redis uses (see dict.c) +# keys to values). The hash table implementation Redis uses (see dict.c) # performs a lazy rehashing: the more operation you run into an hash table -# that is rhashing, the more rehashing "steps" are performed, so if the +# that is rehashing, the more rehashing "steps" are performed, so if the # server is idle the rehashing is never complete and some more memory is used # by the hash table. # @@ -359,10 +446,47 @@ set-max-intset-entries 512 # want to free memory asap when possible. activerehashing yes +# The client output buffer limits can be used to force disconnection of clients +# that are not reading data from the server fast enough for some reason (a +# common reason is that a Pub/Sub client can't consume messages as fast as the +# publisher can produce them). +# +# The limit can be set differently for the three different classes of clients: +# +# normal -> normal clients +# slave -> slave clients and MONITOR clients +# pubsub -> clients subcribed to at least one pubsub channel or pattern +# +# The syntax of every client-output-buffer-limit directive is the following: +# +# client-output-buffer-limit +# +# A client is immediately disconnected once the hard limit is reached, or if +# the soft limit is reached and remains reached for the specified number of +# seconds (continuously). +# So for instance if the hard limit is 32 megabytes and the soft limit is +# 16 megabytes / 10 seconds, the client will get disconnected immediately +# if the size of the output buffers reach 32 megabytes, but will also get +# disconnected if the client reaches 16 megabytes and continuously overcomes +# the limit for 10 seconds. +# +# By default normal clients are not limited because they don't receive data +# without asking (in a push way), but just after a request, so only +# asynchronous clients may create a scenario where data is requested faster +# than it can read. +# +# Instead there is a default limit for pubsub and slave clients, since +# subscribers and slaves receive data in a push fashion. +# +# Both the hard or the soft limit can be disabled just setting it to zero. +client-output-buffer-limit normal 0 0 0 +client-output-buffer-limit slave 256mb 64mb 60 +client-output-buffer-limit pubsub 32mb 8mb 60 + ################################## INCLUDES ################################### # Include one or more other config files here. This is useful if you -# have a standard template that goes to all redis server but also need +# have a standard template that goes to all Redis server but also need # to customize a few per-server settings. Include files can include # other files, so use this wisely. #