X-Git-Url: https://git.saurik.com/redis.git/blobdiff_plain/57c0cf8b8571128152ca785f664ee369c5a433a7..3f7ad83398f66dfd7a4beb1b5bf610b499f6b942:/redis.conf?ds=inline diff --git a/redis.conf b/redis.conf index 22ec82e7..52520fe2 100644 --- a/redis.conf +++ b/redis.conf @@ -82,11 +82,32 @@ databases 16 # after 60 sec if at least 10000 keys changed # # Note: you can disable saving at all commenting all the "save" lines. +# +# It is also possible to remove all the previously configured save +# points by adding a save directive with a single empty string argument +# like in the following example: +# +# save "" save 900 1 save 300 10 save 60 10000 +# By default Redis will stop accepting writes if RDB snapshots are enabled +# (at least one save point) and the latest background save failed. +# This will make the user aware (in an hard way) that data is not persisting +# on disk properly, otherwise chances are that no one will notice and some +# distater will happen. +# +# If the background saving process will start working again Redis will +# automatically allow writes again. +# +# However if you have setup your proper monitoring of the Redis server +# and persistence, you may want to disable this feature so that Redis will +# continue to work as usually even if there are problems with disk, +# permissions, and so forth. +stop-writes-on-bgsave-error yes + # Compress string objects using LZF when dump .rdb databases? # For default that's set to 'yes' as it's almost always a win. # If you want to save some CPU in the saving child set it to 'no' but @@ -135,6 +156,14 @@ dir ./ # slave-serve-stale-data yes +# You can configure a slave instance to accept writes or not. Writing against +# a slave instance may be useful to store some ephemeral data (because data +# written on a slave will be easily deleted after resync with the master) but +# may also cause problems if clients are writing to it for an error. +# +# Since Redis 2.6 by default slaves are read-only. +slave-read-only yes + # Slaves send PINGs to server in a predefined interval. It's possible to change # this interval with the repl_ping_slave_period option. The default value is 10 # seconds. @@ -195,21 +224,27 @@ slave-serve-stale-data yes # maxclients 10000 # Don't use more memory than the specified amount of bytes. -# When the memory limit is reached Redis will try to remove keys with an -# EXPIRE set. It will try to start freeing keys that are going to expire -# in little time and preserve keys with a longer time to live. -# Redis will also try to remove objects from free lists if possible. -# -# If all this fails, Redis will start to reply with errors to commands -# that will use more memory, like SET, LPUSH, and so on, and will continue -# to reply to most read-only commands like GET. -# -# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a -# 'state' server or cache, not as a real DB. When Redis is used as a real -# database the memory usage will grow over the weeks, it will be obvious if -# it is going to use too much memory in the long run, and you'll have the time -# to upgrade. With maxmemory after the limit is reached you'll start to get -# errors for write operations, and this may even lead to DB inconsistency. +# When the memory limit is reached Redis will try to remove keys +# accordingly to the eviction policy selected (see maxmemmory-policy). +# +# If Redis can't remove keys according to the policy, or if the policy is +# set to 'noeviction', Redis will start to reply with errors to commands +# that would use more memory, like SET, LPUSH, and so on, and will continue +# to reply to read-only commands like GET. +# +# This option is usually useful when using Redis as an LRU cache, or to set +# an hard memory limit for an instance (using the 'noeviction' policy). +# +# WARNING: If you have slaves attached to an instance with maxmemory on, +# the size of the output buffers needed to feed the slaves are subtracted +# from the used memory count, so that network problems / resyncs will +# not trigger a loop where keys are evicted, and in turn the output +# buffer of slaves is full with DELs of keys evicted triggering the deletion +# of more keys, and so forth until the database is completely emptied. +# +# In short... if you have slaves attached it is suggested that you set a lower +# limit for maxmemory so that there is some free RAM on the system for slave +# output buffers (but this is not needed if the policy is 'noeviction'). # # maxmemory @@ -219,7 +254,7 @@ slave-serve-stale-data yes # volatile-lru -> remove the key with an expire set using an LRU algorithm # allkeys-lru -> remove any key accordingly to the LRU algorithm # volatile-random -> remove a random key with an expire set -# allkeys->random -> remove a random key, any key +# allkeys-random -> remove a random key, any key # volatile-ttl -> remove the key with the nearest expire time (minor TTL) # noeviction -> don't expire at all, just return an error on write operations # @@ -349,25 +384,6 @@ auto-aof-rewrite-min-size 64mb # Set it to 0 or a negative value for unlimited execution without warnings. lua-time-limit 5000 -################################ REDIS CLUSTER ############################### -# -# Normal Redis instances can't be part of a Redis Cluster, only nodes that are -# started as cluster nodes can. In order to start a Redis instance as a -# cluster node enable the cluster support uncommenting the following: -# -# cluster-enabled yes - -# Every cluster node has a cluster configuration file. This file is not -# intended to be edited by hand. It is created and updated by Redis nodes. -# Every Redis Cluster node requires a different cluster configuration file. -# Make sure that instances running in the same system does not have -# overlapping cluster configuration file names. -# -# cluster-config-file nodes-6379.conf - -# In order to setup your cluster make sure to read the documentation -# available at http://redis.io web site. - ################################## SLOW LOG ################################### # The Redis Slow Log is a system to log queries that exceeded a specified @@ -394,12 +410,11 @@ slowlog-max-len 1024 ############################### ADVANCED CONFIG ############################### -# Hashes are encoded in a special way (much more memory efficient) when they -# have at max a given number of elements, and the biggest element does not -# exceed a given threshold. You can configure this limits with the following -# configuration directives. -hash-max-zipmap-entries 512 -hash-max-zipmap-value 64 +# Hashes are encoded using a memory efficient data structure when they have a +# small number of entries, and the biggest entry does not exceed a given +# threshold. These thresholds can be configured using the following directives. +hash-max-ziplist-entries 512 +hash-max-ziplist-value 64 # Similarly to hashes, small lists are also encoded in a special way in order # to save a lot of space. The special representation is only used when @@ -440,6 +455,43 @@ zset-max-ziplist-value 64 # want to free memory asap when possible. activerehashing yes +# The client output buffer limits can be used to force disconnection of clients +# that are not reading data from the server fast enough for some reason (a +# common reason is that a Pub/Sub client can't consume messages as fast as the +# publisher can produce them). +# +# The limit can be set differently for the three different classes of clients: +# +# normal -> normal clients +# slave -> slave clients and MONITOR clients +# pubsub -> clients subcribed to at least one pubsub channel or pattern +# +# The syntax of every client-output-buffer-limit directive is the following: +# +# client-output-buffer-limit +# +# A client is immediately disconnected once the hard limit is reached, or if +# the soft limit is reached and remains reached for the specified number of +# seconds (continuously). +# So for instance if the hard limit is 32 megabytes and the soft limit is +# 16 megabytes / 10 seconds, the client will get disconnected immediately +# if the size of the output buffers reach 32 megabytes, but will also get +# disconnected if the client reaches 16 megabytes and continuously overcomes +# the limit for 10 seconds. +# +# By default normal clients are not limited because they don't receive data +# without asking (in a push way), but just after a request, so only +# asynchronous clients may create a scenario where data is requested faster +# than it can read. +# +# Instead there is a default limit for pubsub and slave clients, since +# subscribers and slaves receive data in a push fashion. +# +# Both the hard or the soft limit can be disabled just setting it to zero. +client-output-buffer-limit normal 0 0 0 +client-output-buffer-limit slave 256mb 64mb 60 +client-output-buffer-limit pubsub 32mb 8mb 60 + ################################## INCLUDES ################################### # Include one or more other config files here. This is useful if you