X-Git-Url: https://git.saurik.com/redis.git/blobdiff_plain/44b38ef43259e8805b01db01ad9a1c67479c6194..c8d9e7f4c0c237ca75e0e53c0c643ef0f09f81bb:/redis.conf?ds=sidebyside

diff --git a/redis.conf b/redis.conf
index fac5ba60..c48a2fb8 100644
--- a/redis.conf
+++ b/redis.conf
@@ -1,24 +1,56 @@
 # Redis configuration file example
 
+# Note on units: when memory size is needed, it is possible to specifiy
+# it in the usual form of 1k 5GB 4M and so forth:
+#
+# 1k => 1000 bytes
+# 1kb => 1024 bytes
+# 1m => 1000000 bytes
+# 1mb => 1024*1024 bytes
+# 1g => 1000000000 bytes
+# 1gb => 1024*1024*1024 bytes
+#
+# units are case insensitive so 1GB 1Gb 1gB are all the same.
+
 # By default Redis does not run as a daemon. Use 'yes' if you need it.
 # Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
 daemonize no
 
-# When run as a daemon, Redis write a pid file in /var/run/redis.pid by default.
-# You can specify a custom pid file location here.
+# When running daemonized, Redis writes a pid file in /var/run/redis.pid by
+# default. You can specify a custom pid file location here.
 pidfile /var/run/redis.pid
 
 # Accept connections on the specified port, default is 6379
 port 6379
 
 # If you want you can bind a single interface, if the bind option is not
-# specified all the interfaces will listen for connections.
+# specified all the interfaces will listen for incoming connections.
 #
 # bind 127.0.0.1
 
 # Close the connection after a client is idle for N seconds (0 to disable)
 timeout 300
 
+# Set server verbosity to 'debug'
+# it can be one of:
+# debug (a lot of information, useful for development/testing)
+# verbose (many rarely useful info, but not a mess like the debug level)
+# notice (moderately verbose, what you want in production probably)
+# warning (only very important / critical messages are logged)
+loglevel verbose
+
+# Specify the log file name. Also 'stdout' can be used to force
+# Redis to log on the standard output. Note that if you use standard
+# output for logging but daemonize, logs will be sent to /dev/null
+logfile stdout
+
+# Set the number of databases. The default database is DB 0, you can select
+# a different one on a per-connection basis using SELECT <dbid> where
+# dbid is a number between 0 and 'databases'-1
+databases 16
+
+################################ SNAPSHOTTING  #################################
+#
 # Save the DB on disk:
 #
 #   save <seconds> <changes>
@@ -30,43 +62,48 @@ timeout 300
 #   after 900 sec (15 min) if at least 1 key changed
 #   after 300 sec (5 min) if at least 10 keys changed
 #   after 60 sec if at least 10000 keys changed
+#
+#   Note: you can disable saving at all commenting all the "save" lines.
+
 save 900 1
 save 300 10
 save 60 10000
 
+# Compress string objects using LZF when dump .rdb databases?
+# For default that's set to 'yes' as it's almost always a win.
+# If you want to save some CPU in the saving child set it to 'no' but
+# the dataset will likely be bigger if you have compressible values or keys.
+rdbcompression yes
+
 # The filename where to dump the DB
 dbfilename dump.rdb
 
-# For default save/load DB in/from the working directory
-# Note that you must specify a directory not a file name.
+# The working directory.
+#
+# The DB will be written inside this directory, with the filename specified
+# above using the 'dbfilename' configuration directive.
+# 
+# Also the Append Only File will be created inside this directory.
+# 
+# Note that you must specify a directory here, not a file name.
 dir ./
 
-# Set server verbosity to 'debug'
-# it can be one of:
-# debug (a lot of information, useful for development/testing)
-# notice (moderately verbose, what you want in production probably)
-# warning (only very important / critical messages are logged)
-loglevel debug
-
-# Specify the log file name. Also 'stdout' can be used to force
-# the demon to log on the standard output. Note that if you use standard
-# output for logging but daemonize, logs will be sent to /dev/null
-logfile stdout
-
-# Set the number of databases. The default database is DB 0, you can select
-# a different one on a per-connection basis using SELECT <dbid> where
-# dbid is a number between 0 and 'databases'-1
-databases 16
-
 ################################# REPLICATION #################################
 
 # Master-Slave replication. Use slaveof to make a Redis instance a copy of
 # another Redis server. Note that the configuration is local to the slave
 # so for example it is possible to configure the slave to save the DB with a
 # different interval, or to listen to another port, and so on.
-
+#
 # slaveof <masterip> <masterport>
 
+# If the master is password protected (using the "requirepass" configuration
+# directive below) it is possible to tell the slave to authenticate before
+# starting the replication synchronization process, otherwise the master will
+# refuse the slave request.
+#
+# masterauth <master-password>
+
 ################################## SECURITY ###################################
 
 # Require clients to issue AUTH <PASSWORD> before processing any other
@@ -75,17 +112,21 @@ databases 16
 #
 # This should stay commented out for backward compatibility and because most
 # people do not need auth (e.g. they run their own servers).
-
+# 
+# Warning: since Redis is pretty fast an outside user can try up to
+# 150k passwords per second against a good box. This means that you should
+# use a very strong password otherwise it will be very easy to break.
+#
 # requirepass foobared
 
 ################################### LIMITS ####################################
 
 # Set the max number of connected clients at the same time. By default there
 # is no limit, and it's up to the number of file descriptors the Redis process
-# is able to open. The special value '0' means no limts.
+# is able to open. The special value '0' means no limits.
 # Once the limit is reached Redis will close all the new connections sending
 # an error 'max number of clients reached'.
-
+#
 # maxclients 128
 
 # Don't use more memory than the specified amount of bytes.
@@ -104,7 +145,7 @@ databases 16
 # it is going to use too much memory in the long run, and you'll have the time
 # to upgrade. With maxmemory after the limit is reached you'll start to get
 # errors for write operations, and this may even lead to DB inconsistency.
-
+#
 # maxmemory <bytes>
 
 ############################## APPEND ONLY MODE ###############################
@@ -114,15 +155,117 @@ databases 16
 # happens this is the preferred way to run Redis. If instead you care a lot
 # about your data and don't want to that a single record can get lost you should
 # enable the append only mode: when this mode is enabled Redis will append
-# every write operation received in the file appendonly.log. This file will
+# every write operation received in the file appendonly.aof. This file will
 # be read on startup in order to rebuild the full dataset in memory.
 #
 # Note that you can have both the async dumps and the append only file if you
 # like (you have to comment the "save" statements above to disable the dumps).
 # Still if append only mode is enabled Redis will load the data from the
 # log file at startup ignoring the dump.rdb file.
+#
+# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
+# log file in background when it gets too big.
+
+appendonly no
+
+# The name of the append only file (default: "appendonly.aof")
+# appendfilename appendonly.aof
+
+# The fsync() call tells the Operating System to actually write data on disk
+# instead to wait for more data in the output buffer. Some OS will really flush 
+# data on disk, some other OS will just try to do it ASAP.
+#
+# Redis supports three different modes:
+#
+# no: don't fsync, just let the OS flush the data when it wants. Faster.
+# always: fsync after every write to the append only log . Slow, Safest.
+# everysec: fsync only if one second passed since the last fsync. Compromise.
+#
+# The default is "everysec" that's usually the right compromise between
+# speed and data safety. It's up to you to understand if you can relax this to
+# "no" that will will let the operating system flush the output buffer when
+# it wants, for better performances (but if you can live with the idea of
+# some data loss consider the default persistence mode that's snapshotting),
+# or on the contrary, use "always" that's very slow but a bit safer than
+# everysec.
+#
+# If unsure, use "everysec".
+
+# appendfsync always
+appendfsync everysec
+# appendfsync no
+
+################################ VIRTUAL MEMORY ###############################
+
+# Virtual Memory allows Redis to work with datasets bigger than the actual
+# amount of RAM needed to hold the whole dataset in memory.
+# In order to do so very used keys are taken in memory while the other keys
+# are swapped into a swap file, similarly to what operating systems do
+# with memory pages.
+#
+# To enable VM just set 'vm-enabled' to yes, and set the following three
+# VM parameters accordingly to your needs.
 
-# appendonly yes
+vm-enabled no
+# vm-enabled yes
+
+# This is the path of the Redis swap file. As you can guess, swap files
+# can't be shared by different Redis instances, so make sure to use a swap
+# file for every redis process you are running. Redis will complain if the
+# swap file is already in use.
+#
+# The best kind of storage for the Redis swap file (that's accessed at random) 
+# is a Solid State Disk (SSD).
+#
+# *** WARNING *** if you are using a shared hosting the default of putting
+# the swap file under /tmp is not secure. Create a dir with access granted
+# only to Redis user and configure Redis to create the swap file there.
+vm-swap-file /tmp/redis.swap
+
+# vm-max-memory configures the VM to use at max the specified amount of
+# RAM. Everything that deos not fit will be swapped on disk *if* possible, that
+# is, if there is still enough contiguous space in the swap file.
+#
+# With vm-max-memory 0 the system will swap everything it can. Not a good
+# default, just specify the max amount of RAM you can in bytes, but it's
+# better to leave some margin. For instance specify an amount of RAM
+# that's more or less between 60 and 80% of your free RAM.
+vm-max-memory 0
+
+# Redis swap files is split into pages. An object can be saved using multiple
+# contiguous pages, but pages can't be shared between different objects.
+# So if your page is too big, small objects swapped out on disk will waste
+# a lot of space. If you page is too small, there is less space in the swap
+# file (assuming you configured the same number of total swap file pages).
+#
+# If you use a lot of small objects, use a page size of 64 or 32 bytes.
+# If you use a lot of big objects, use a bigger page size.
+# If unsure, use the default :)
+vm-page-size 32
+
+# Number of total memory pages in the swap file.
+# Given that the page table (a bitmap of free/used pages) is taken in memory,
+# every 8 pages on disk will consume 1 byte of RAM.
+#
+# The total swap size is vm-page-size * vm-pages
+#
+# With the default of 32-bytes memory pages and 134217728 pages Redis will
+# use a 4 GB swap file, that will use 16 MB of RAM for the page table.
+#
+# It's better to use the smallest acceptable value for your application,
+# but the default is large in order to work in most conditions.
+vm-pages 134217728
+
+# Max number of VM I/O threads running at the same time.
+# This threads are used to read/write data from/to swap file, since they
+# also encode and decode objects from disk to memory or the reverse, a bigger
+# number of threads can help with big objects even if they can't help with
+# I/O itself as the physical device may not be able to couple with many
+# reads/writes operations at the same time.
+#
+# The special value of 0 turn off threaded I/O and enables the blocking
+# Virtual Memory implementation.
+vm-max-threads 4
 
 ############################### ADVANCED CONFIG ###############################
 
@@ -131,19 +274,39 @@ databases 16
 # in terms of number of queries per second. Use 'yes' if unsure.
 glueoutputbuf yes
 
-# Use object sharing. Can save a lot of memory if you have many common
-# string in your dataset, but performs lookups against the shared objects
-# pool so it uses more CPU and can be a bit slower. Usually it's a good
-# idea.
-#
-# When object sharing is enabled (shareobjects yes) you can use
-# shareobjectspoolsize to control the size of the pool used in order to try
-# object sharing. A bigger pool size will lead to better sharing capabilities.
-# In general you want this value to be at least the double of the number of
-# very common strings you have in your dataset.
-#
-# WARNING: object sharing is experimental, don't enable this feature
-# in production before of Redis 1.0-stable. Still please try this feature in
-# your development environment so that we can test it better.
-shareobjects no
-shareobjectspoolsize 1024
+# Hashes are encoded in a special way (much more memory efficient) when they
+# have at max a given numer of elements, and the biggest element does not
+# exceed a given threshold. You can configure this limits with the following
+# configuration directives.
+hash-max-zipmap-entries 64
+hash-max-zipmap-value 512
+
+# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
+# order to help rehashing the main Redis hash table (the one mapping top-level
+# keys to values). The hash table implementation redis uses (see dict.c)
+# performs a lazy rehashing: the more operation you run into an hash table
+# that is rhashing, the more rehashing "steps" are performed, so if the
+# server is idle the rehashing is never complete and some more memory is used
+# by the hash table.
+# 
+# The default is to use this millisecond 10 times every second in order to
+# active rehashing the main dictionaries, freeing memory when possible.
+#
+# If unsure:
+# use "activerehashing no" if you have hard latency requirements and it is
+# not a good thing in your environment that Redis can reply form time to time
+# to queries with 2 milliseconds delay.
+#
+# use "activerehashing yes" if you don't have such hard requirements but
+# want to free memory asap when possible.
+activerehashing yes
+
+################################## INCLUDES ###################################
+
+# Include one or more other config files here.  This is useful if you
+# have a standard template that goes to all redis server but also need
+# to customize a few per-server settings.  Include files can include
+# other files, so use this wisely.
+#
+# include /path/to/local.conf
+# include /path/to/other.conf