X-Git-Url: https://git.saurik.com/redis.git/blobdiff_plain/40f3ff21b7366defa4ae84ba93f4833a468669a1..4d3bbf3590af7b575dd90512aa12706cea7ed899:/redis.conf diff --git a/redis.conf b/redis.conf index df23414c..2b4b6479 100644 --- a/redis.conf +++ b/redis.conf @@ -1,6 +1,6 @@ # Redis configuration file example -# Note on units: when memory size is needed, it is possible to specifiy +# Note on units: when memory size is needed, it is possible to specify # it in the usual form of 1k 5GB 4M and so forth: # # 1k => 1000 bytes @@ -45,7 +45,7 @@ timeout 0 # verbose (many rarely useful info, but not a mess like the debug level) # notice (moderately verbose, what you want in production probably) # warning (only very important / critical messages are logged) -loglevel verbose +loglevel notice # Specify the log file name. Also 'stdout' can be used to force # Redis to log on the standard output. Note that if you use standard @@ -82,11 +82,32 @@ databases 16 # after 60 sec if at least 10000 keys changed # # Note: you can disable saving at all commenting all the "save" lines. +# +# It is also possible to remove all the previously configured save +# points by adding a save directive with a single empty string argument +# like in the following example: +# +# save "" save 900 1 save 300 10 save 60 10000 +# By default Redis will stop accepting writes if RDB snapshots are enabled +# (at least one save point) and the latest background save failed. +# This will make the user aware (in an hard way) that data is not persisting +# on disk properly, otherwise chances are that no one will notice and some +# distater will happen. +# +# If the background saving process will start working again Redis will +# automatically allow writes again. +# +# However if you have setup your proper monitoring of the Redis server +# and persistence, you may want to disable this feature so that Redis will +# continue to work as usually even if there are problems with disk, +# permissions, and so forth. +stop-writes-on-bgsave-error yes + # Compress string objects using LZF when dump .rdb databases? # For default that's set to 'yes' as it's almost always a win. # If you want to save some CPU in the saving child set it to 'no' but @@ -126,7 +147,7 @@ dir ./ # is still in progress, the slave can act in two different ways: # # 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will -# still reply to client requests, possibly with out of data data, or the +# still reply to client requests, possibly with out of date data, or the # data set may just be empty if this is the first synchronization. # # 2) if slave-serve-stale data is set to 'no' the slave will reply with @@ -167,7 +188,7 @@ slave-serve-stale-data yes # Command renaming. # -# It is possilbe to change the name of dangerous commands in a shared +# It is possible to change the name of dangerous commands in a shared # environment. For instance the CONFIG command may be renamed into something # of hard to guess so that it will be still available for internal-use # tools but not available for general clients. @@ -176,7 +197,7 @@ slave-serve-stale-data yes # # rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52 # -# It is also possilbe to completely kill a command renaming it into +# It is also possible to completely kill a command renaming it into # an empty string: # # rename-command CONFIG "" @@ -195,21 +216,27 @@ slave-serve-stale-data yes # maxclients 10000 # Don't use more memory than the specified amount of bytes. -# When the memory limit is reached Redis will try to remove keys with an -# EXPIRE set. It will try to start freeing keys that are going to expire -# in little time and preserve keys with a longer time to live. -# Redis will also try to remove objects from free lists if possible. -# -# If all this fails, Redis will start to reply with errors to commands -# that will use more memory, like SET, LPUSH, and so on, and will continue -# to reply to most read-only commands like GET. -# -# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a -# 'state' server or cache, not as a real DB. When Redis is used as a real -# database the memory usage will grow over the weeks, it will be obvious if -# it is going to use too much memory in the long run, and you'll have the time -# to upgrade. With maxmemory after the limit is reached you'll start to get -# errors for write operations, and this may even lead to DB inconsistency. +# When the memory limit is reached Redis will try to remove keys +# accordingly to the eviction policy selected (see maxmemmory-policy). +# +# If Redis can't remove keys according to the policy, or if the policy is +# set to 'noeviction', Redis will start to reply with errors to commands +# that would use more memory, like SET, LPUSH, and so on, and will continue +# to reply to read-only commands like GET. +# +# This option is usually useful when using Redis as an LRU cache, or to set +# an hard memory limit for an instance (using the 'noeviction' policy). +# +# WARNING: If you have slaves attached to an instance with maxmemory on, +# the size of the output buffers needed to feed the slaves are subtracted +# from the used memory count, so that network problems / resyncs will +# not trigger a loop where keys are evicted, and in turn the output +# buffer of slaves is full with DELs of keys evicted triggering the deletion +# of more keys, and so forth until the database is completely emptied. +# +# In short... if you have slaves attached it is suggested that you set a lower +# limit for maxmemory so that there is some free RAM on the system for slave +# output buffers (but this is not needed if the policy is 'noeviction'). # # maxmemory @@ -279,7 +306,7 @@ appendonly no # # The default is "everysec" that's usually the right compromise between # speed and data safety. It's up to you to understand if you can relax this to -# "no" that will will let the operating system flush the output buffer when +# "no" that will let the operating system flush the output buffer when # it wants, for better performances (but if you can live with the idea of # some data loss consider the default persistence mode that's snapshotting), # or on the contrary, use "always" that's very slow but a bit safer than @@ -303,7 +330,7 @@ appendfsync everysec # BGSAVE or BGREWRITEAOF is in progress. # # This means that while another child is saving the durability of Redis is -# the same as "appendfsync none", that in pratical terms means that it is +# the same as "appendfsync none", that in practical terms means that it is # possible to lost up to 30 seconds of log in the worst scenario (with the # default Linux settings). # @@ -325,7 +352,7 @@ no-appendfsync-on-rewrite no # is useful to avoid rewriting the AOF file even if the percentage increase # is reached but it is still pretty small. # -# Specify a precentage of zero in order to disable the automatic AOF +# Specify a percentage of zero in order to disable the automatic AOF # rewrite feature. auto-aof-rewrite-percentage 100 @@ -336,10 +363,10 @@ auto-aof-rewrite-min-size 64mb # Max execution time of a Lua script in milliseconds. # # If the maximum execution time is reached Redis will log that a script is -# still in execution after the maxium allowed time and will start to +# still in execution after the maximum allowed time and will start to # reply to queries with an error. # -# When a long running script exceed the maxium execution time only the +# When a long running script exceed the maximum execution time only the # SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be # used to stop a script that did not yet called write commands. The second # is the only way to shut down the server in the case a write commands was @@ -395,7 +422,7 @@ slowlog-max-len 1024 ############################### ADVANCED CONFIG ############################### # Hashes are encoded in a special way (much more memory efficient) when they -# have at max a given numer of elements, and the biggest element does not +# have at max a given number of elements, and the biggest element does not # exceed a given threshold. You can configure this limits with the following # configuration directives. hash-max-zipmap-entries 512 @@ -422,9 +449,9 @@ zset-max-ziplist-value 64 # Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in # order to help rehashing the main Redis hash table (the one mapping top-level -# keys to values). The hash table implementation redis uses (see dict.c) +# keys to values). The hash table implementation Redis uses (see dict.c) # performs a lazy rehashing: the more operation you run into an hash table -# that is rhashing, the more rehashing "steps" are performed, so if the +# that is rehashing, the more rehashing "steps" are performed, so if the # server is idle the rehashing is never complete and some more memory is used # by the hash table. # @@ -440,10 +467,47 @@ zset-max-ziplist-value 64 # want to free memory asap when possible. activerehashing yes +# The client output buffer limits can be used to force disconnection of clients +# that are not reading data from the server fast enough for some reason (a +# common reason is that a Pub/Sub client can't consume messages as fast as the +# publisher can produce them). +# +# The limit can be set differently for the three different classes of clients: +# +# normal -> normal clients +# slave -> slave clients and MONITOR clients +# pubsub -> clients subcribed to at least one pubsub channel or pattern +# +# The syntax of every client-output-buffer-limit directive is the following: +# +# client-output-buffer-limit +# +# A client is immediately disconnected once the hard limit is reached, or if +# the soft limit is reached and remains reached for the specified number of +# seconds (continuously). +# So for instance if the hard limit is 32 megabytes and the soft limit is +# 16 megabytes / 10 seconds, the client will get disconnected immediately +# if the size of the output buffers reach 32 megabytes, but will also get +# disconnected if the client reaches 16 megabytes and continuously overcomes +# the limit for 10 seconds. +# +# By default normal clients are not limited because they don't receive data +# without asking (in a push way), but just after a request, so only +# asynchronous clients may create a scenario where data is requested faster +# than it can read. +# +# Instead there is a default limit for pubsub and slave clients, since +# subscribers and slaves receive data in a push fashion. +# +# Both the hard or the soft limit can be disabled just setting it to zero. +client-output-buffer-limit normal 0 0 0 +client-output-buffer-limit slave 256mb 64mb 60 +client-output-buffer-limit pubsub 32mb 8mb 60 + ################################## INCLUDES ################################### # Include one or more other config files here. This is useful if you -# have a standard template that goes to all redis server but also need +# have a standard template that goes to all Redis server but also need # to customize a few per-server settings. Include files can include # other files, so use this wisely. #