#include <float.h>
#include <math.h>
#include <sys/resource.h>
+#include <sys/utsname.h>
/* Our shared "common" objects */
* results. For instance SPOP and RANDOMKEY are two random commands.
* S: Sort command output array if called from script, so that the output
* is deterministic.
+ * l: Allow command while loading the database.
+ * t: Allow command while a slave has stale data but is not allowed to
+ * server this data. Normally no command is accepted in this condition
+ * but just a few.
*/
struct redisCommand redisCommandTable[] = {
{"get",getCommand,2,"r",0,NULL,1,1,1,0,0},
{"sismember",sismemberCommand,3,"r",0,NULL,1,1,1,0,0},
{"scard",scardCommand,2,"r",0,NULL,1,1,1,0,0},
{"spop",spopCommand,2,"wRs",0,NULL,1,1,1,0,0},
- {"srandmember",srandmemberCommand,2,"rR",0,NULL,1,1,1,0,0},
+ {"srandmember",srandmemberCommand,-2,"rR",0,NULL,1,1,1,0,0},
{"sinter",sinterCommand,-2,"rS",0,NULL,1,-1,1,0,0},
{"sinterstore",sinterstoreCommand,-3,"wm",0,NULL,1,-1,1,0,0},
{"sunion",sunionCommand,-2,"rS",0,NULL,1,-1,1,0,0},
{"lastsave",lastsaveCommand,1,"r",0,NULL,0,0,0,0,0},
{"type",typeCommand,2,"r",0,NULL,1,1,1,0,0},
{"multi",multiCommand,1,"rs",0,NULL,0,0,0,0,0},
- {"exec",execCommand,1,"wms",0,NULL,0,0,0,0,0},
+ {"exec",execCommand,1,"s",0,NULL,0,0,0,0,0},
{"discard",discardCommand,1,"rs",0,NULL,0,0,0,0,0},
{"sync",syncCommand,1,"ars",0,NULL,0,0,0,0,0},
+ {"replconf",replconfCommand,-1,"ars",0,NULL,0,0,0,0,0},
{"flushdb",flushdbCommand,1,"w",0,NULL,0,0,0,0,0},
{"flushall",flushallCommand,1,"w",0,NULL,0,0,0,0,0},
- {"sort",sortCommand,-2,"wmS",0,NULL,1,1,1,0,0},
- {"info",infoCommand,-1,"r",0,NULL,0,0,0,0,0},
+ {"sort",sortCommand,-2,"wm",0,NULL,1,1,1,0,0},
+ {"info",infoCommand,-1,"rlt",0,NULL,0,0,0,0,0},
{"monitor",monitorCommand,1,"ars",0,NULL,0,0,0,0,0},
{"ttl",ttlCommand,2,"r",0,NULL,1,1,1,0,0},
{"pttl",pttlCommand,2,"r",0,NULL,1,1,1,0,0},
{"persist",persistCommand,2,"w",0,NULL,1,1,1,0,0},
- {"slaveof",slaveofCommand,3,"aws",0,NULL,0,0,0,0,0},
- {"debug",debugCommand,-2,"aws",0,NULL,0,0,0,0,0},
+ {"slaveof",slaveofCommand,3,"ast",0,NULL,0,0,0,0,0},
+ {"debug",debugCommand,-2,"as",0,NULL,0,0,0,0,0},
{"config",configCommand,-2,"ar",0,NULL,0,0,0,0,0},
- {"subscribe",subscribeCommand,-2,"rps",0,NULL,0,0,0,0,0},
- {"unsubscribe",unsubscribeCommand,-1,"rps",0,NULL,0,0,0,0,0},
- {"psubscribe",psubscribeCommand,-2,"rps",0,NULL,0,0,0,0,0},
- {"punsubscribe",punsubscribeCommand,-1,"rps",0,NULL,0,0,0,0,0},
- {"publish",publishCommand,3,"rpf",0,NULL,0,0,0,0,0},
+ {"subscribe",subscribeCommand,-2,"rpslt",0,NULL,0,0,0,0,0},
+ {"unsubscribe",unsubscribeCommand,-1,"rpslt",0,NULL,0,0,0,0,0},
+ {"psubscribe",psubscribeCommand,-2,"rpslt",0,NULL,0,0,0,0,0},
+ {"punsubscribe",punsubscribeCommand,-1,"rpslt",0,NULL,0,0,0,0,0},
+ {"publish",publishCommand,3,"pflt",0,NULL,0,0,0,0,0},
{"watch",watchCommand,-2,"rs",0,noPreloadGetKeys,1,-1,1,0,0},
{"unwatch",unwatchCommand,1,"rs",0,NULL,0,0,0,0,0},
{"cluster",clusterCommand,-2,"ar",0,NULL,0,0,0,0,0},
{"dump",dumpCommand,2,"ar",0,NULL,1,1,1,0,0},
{"object",objectCommand,-2,"r",0,NULL,2,2,2,0,0},
{"client",clientCommand,-2,"ar",0,NULL,0,0,0,0,0},
- {"eval",evalCommand,-3,"wms",0,zunionInterGetKeys,0,0,0,0,0},
- {"evalsha",evalShaCommand,-3,"wms",0,zunionInterGetKeys,0,0,0,0,0},
+ {"eval",evalCommand,-3,"s",0,zunionInterGetKeys,0,0,0,0,0},
+ {"evalsha",evalShaCommand,-3,"s",0,zunionInterGetKeys,0,0,0,0,0},
{"slowlog",slowlogCommand,-2,"r",0,NULL,0,0,0,0,0},
- {"script",scriptCommand,-2,"ras",0,NULL,0,0,0,0,0}
+ {"script",scriptCommand,-2,"ras",0,NULL,0,0,0,0,0},
+ {"time",timeCommand,1,"rR",0,NULL,0,0,0,0,0},
+ {"bitop",bitopCommand,-4,"wm",0,NULL,2,-1,1,0,0},
+ {"bitcount",bitcountCommand,-2,"r",0,NULL,1,1,1,0,0}
};
/*============================ Utility functions ============================ */
void redisLogRaw(int level, const char *msg) {
const int syslogLevelMap[] = { LOG_DEBUG, LOG_INFO, LOG_NOTICE, LOG_WARNING };
const char *c = ".-*#";
- time_t now = time(NULL);
FILE *fp;
char buf[64];
int rawmode = (level & REDIS_LOG_RAW);
if (rawmode) {
fprintf(fp,"%s",msg);
} else {
- strftime(buf,sizeof(buf),"%d %b %H:%M:%S",localtime(&now));
+ int off;
+ struct timeval tv;
+
+ gettimeofday(&tv,NULL);
+ off = strftime(buf,sizeof(buf),"%d %b %H:%M:%S.",localtime(&tv.tv_sec));
+ snprintf(buf+off,sizeof(buf)-off,"%03d",(int)tv.tv_usec/1000);
fprintf(fp,"[%d] %s %c %s\n",(int)getpid(),buf,c[level],msg);
}
fflush(fp);
redisLogRaw(level,msg);
}
-/* Redis generally does not try to recover from out of memory conditions
- * when allocating objects or strings, it is not clear if it will be possible
- * to report this condition to the client since the networking layer itself
- * is based on heap allocation for send buffers, so we simply abort.
- * At least the code will be simpler to read... */
-void oom(const char *msg) {
- redisLog(REDIS_WARNING, "%s: Out of memory\n",msg);
- sleep(1);
- abort();
+/* Log a fixed message without printf-alike capabilities, in a way that is
+ * safe to call from a signal handler.
+ *
+ * We actually use this only for signals that are not fatal from the point
+ * of view of Redis. Signals that are going to kill the server anyway and
+ * where we need printf-alike features are served by redisLog(). */
+void redisLogFromHandler(int level, const char *msg) {
+ int fd;
+ char buf[64];
+
+ if ((level&0xff) < server.verbosity ||
+ (server.logfile == NULL && server.daemonize)) return;
+ fd = server.logfile ?
+ open(server.logfile, O_APPEND|O_CREAT|O_WRONLY, 0644) :
+ STDOUT_FILENO;
+ if (fd == -1) return;
+ ll2string(buf,sizeof(buf),getpid());
+ if (write(fd,"[",1) == -1) goto err;
+ if (write(fd,buf,strlen(buf)) == -1) goto err;
+ if (write(fd," | signal handler] (",20) == -1) goto err;
+ ll2string(buf,sizeof(buf),time(NULL));
+ if (write(fd,buf,strlen(buf)) == -1) goto err;
+ if (write(fd,") ",2) == -1) goto err;
+ if (write(fd,msg,strlen(msg)) == -1) goto err;
+ if (write(fd,"\n",1) == -1) goto err;
+err:
+ if (server.logfile) close(fd);
}
/* Return the UNIX time in microseconds */
return ustime()/1000;
}
+/* After an RDB dump or AOF rewrite we exit from children using _exit() instead of
+ * exit(), because the latter may interact with the same file objects used by
+ * the parent process. However if we are testing the coverage normal exit() is
+ * used in order to obtain the right coverage information. */
+void exitFromChild(int retcode) {
+#ifdef COVERAGE_TEST
+ exit(retcode);
+#else
+ _exit(retcode);
+#endif
+}
+
/*====================== Hash table type implementation ==================== */
/* This is an hash table type that uses the SDS dynamic strings libary as
int j;
for (j = 0; j < server.dbnum; j++) {
+ /* Keys dictionary */
if (dictIsRehashing(server.db[j].dict)) {
dictRehashMilliseconds(server.db[j].dict,1);
break; /* already used our millisecond for this loop... */
}
+ /* Expires */
+ if (dictIsRehashing(server.db[j].expires)) {
+ dictRehashMilliseconds(server.db[j].expires,1);
+ break; /* already used our millisecond for this loop... */
+ }
}
}
* it will get more aggressive to avoid that too much memory is used by
* keys that can be removed from the keyspace. */
void activeExpireCycle(void) {
- int j;
+ int j, iteration = 0;
+ long long start = ustime(), timelimit;
+
+ /* We can use at max REDIS_EXPIRELOOKUPS_TIME_PERC percentage of CPU time
+ * per iteration. Since this function gets called with a frequency of
+ * REDIS_HZ times per second, the following is the max amount of
+ * microseconds we can spend in this function. */
+ timelimit = 1000000*REDIS_EXPIRELOOKUPS_TIME_PERC/REDIS_HZ/100;
+ if (timelimit <= 0) timelimit = 1;
for (j = 0; j < server.dbnum; j++) {
int expired;
/* Continue to expire if at the end of the cycle more than 25%
* of the keys were expired. */
do {
- long num = dictSize(db->expires);
+ unsigned long num = dictSize(db->expires);
+ unsigned long slots = dictSlots(db->expires);
long long now = mstime();
+ /* When there are less than 1% filled slots getting random
+ * keys is expensive, so stop here waiting for better times...
+ * The dictionary will be resized asap. */
+ if (num && slots > DICT_HT_INITIAL_SIZE &&
+ (num*100/slots < 1)) break;
+
+ /* The main collection cycle. Sample random keys among keys
+ * with an expire set, checking for expired ones. */
expired = 0;
if (num > REDIS_EXPIRELOOKUPS_PER_CRON)
num = REDIS_EXPIRELOOKUPS_PER_CRON;
server.stat_expiredkeys++;
}
}
+ /* We can't block forever here even if there are many keys to
+ * expire. So after a given amount of milliseconds return to the
+ * caller waiting for the other active expire cycle. */
+ iteration++;
+ if ((iteration & 0xf) == 0 && /* check once every 16 cycles. */
+ (ustime()-start) > timelimit) return;
} while (expired > REDIS_EXPIRELOOKUPS_PER_CRON/4);
}
}
void updateLRUClock(void) {
- server.lruclock = (time(NULL)/REDIS_LRU_CLOCK_RESOLUTION) &
+ server.lruclock = (server.unixtime/REDIS_LRU_CLOCK_RESOLUTION) &
REDIS_LRU_CLOCK_MAX;
}
+
+/* Add a sample to the operations per second array of samples. */
+void trackOperationsPerSecond(void) {
+ long long t = mstime() - server.ops_sec_last_sample_time;
+ long long ops = server.stat_numcommands - server.ops_sec_last_sample_ops;
+ long long ops_sec;
+
+ ops_sec = t > 0 ? (ops*1000/t) : 0;
+
+ server.ops_sec_samples[server.ops_sec_idx] = ops_sec;
+ server.ops_sec_idx = (server.ops_sec_idx+1) % REDIS_OPS_SEC_SAMPLES;
+ server.ops_sec_last_sample_time = mstime();
+ server.ops_sec_last_sample_ops = server.stat_numcommands;
+}
+
+/* Return the mean of all the samples. */
+long long getOperationsPerSecond(void) {
+ int j;
+ long long sum = 0;
+
+ for (j = 0; j < REDIS_OPS_SEC_SAMPLES; j++)
+ sum += server.ops_sec_samples[j];
+ return sum / REDIS_OPS_SEC_SAMPLES;
+}
+
+/* Check for timeouts. Returns non-zero if the client was terminated */
+int clientsCronHandleTimeout(redisClient *c) {
+ time_t now = server.unixtime;
+
+ if (server.maxidletime &&
+ !(c->flags & REDIS_SLAVE) && /* no timeout for slaves */
+ !(c->flags & REDIS_MASTER) && /* no timeout for masters */
+ !(c->flags & REDIS_BLOCKED) && /* no timeout for BLPOP */
+ dictSize(c->pubsub_channels) == 0 && /* no timeout for pubsub */
+ listLength(c->pubsub_patterns) == 0 &&
+ (now - c->lastinteraction > server.maxidletime))
+ {
+ redisLog(REDIS_VERBOSE,"Closing idle client");
+ freeClient(c);
+ return 1;
+ } else if (c->flags & REDIS_BLOCKED) {
+ if (c->bpop.timeout != 0 && c->bpop.timeout < now) {
+ addReply(c,shared.nullmultibulk);
+ unblockClientWaitingData(c);
+ }
+ }
+ return 0;
+}
+
+/* The client query buffer is an sds.c string that can end with a lot of
+ * free space not used, this function reclaims space if needed.
+ *
+ * The funciton always returns 0 as it never terminates the client. */
+int clientsCronResizeQueryBuffer(redisClient *c) {
+ size_t querybuf_size = sdsAllocSize(c->querybuf);
+ time_t idletime = server.unixtime - c->lastinteraction;
+
+ /* There are two conditions to resize the query buffer:
+ * 1) Query buffer is > BIG_ARG and too big for latest peak.
+ * 2) Client is inactive and the buffer is bigger than 1k. */
+ if (((querybuf_size > REDIS_MBULK_BIG_ARG) &&
+ (querybuf_size/(c->querybuf_peak+1)) > 2) ||
+ (querybuf_size > 1024 && idletime > 2))
+ {
+ /* Only resize the query buffer if it is actually wasting space. */
+ if (sdsavail(c->querybuf) > 1024) {
+ c->querybuf = sdsRemoveFreeSpace(c->querybuf);
+ }
+ }
+ /* Reset the peak again to capture the peak memory usage in the next
+ * cycle. */
+ c->querybuf_peak = 0;
+ return 0;
+}
+
+void clientsCron(void) {
+ /* Make sure to process at least 1/(REDIS_HZ*10) of clients per call.
+ * Since this function is called REDIS_HZ times per second we are sure that
+ * in the worst case we process all the clients in 10 seconds.
+ * In normal conditions (a reasonable number of clients) we process
+ * all the clients in a shorter time. */
+ int numclients = listLength(server.clients);
+ int iterations = numclients/(REDIS_HZ*10);
+
+ if (iterations < 50)
+ iterations = (numclients < 50) ? numclients : 50;
+ while(listLength(server.clients) && iterations--) {
+ redisClient *c;
+ listNode *head;
+
+ /* Rotate the list, take the current head, process.
+ * This way if the client must be removed from the list it's the
+ * first element and we don't incur into O(N) computation. */
+ listRotate(server.clients);
+ head = listFirst(server.clients);
+ c = listNodeValue(head);
+ /* The following functions do different service checks on the client.
+ * The protocol is that they return non-zero if the client was
+ * terminated. */
+ if (clientsCronHandleTimeout(c)) continue;
+ if (clientsCronResizeQueryBuffer(c)) continue;
+ }
+}
+
+/* This is our timer interrupt, called REDIS_HZ times per second.
+ * Here is where we do a number of things that need to be done asynchronously.
+ * For instance:
+ *
+ * - Active expired keys collection (it is also performed in a lazy way on
+ * lookup).
+ * - Software watchdong.
+ * - Update some statistic.
+ * - Incremental rehashing of the DBs hash tables.
+ * - Triggering BGSAVE / AOF rewrite, and handling of terminated children.
+ * - Clients timeout of differnet kinds.
+ * - Replication reconnection.
+ * - Many more...
+ *
+ * Everything directly called here will be called REDIS_HZ times per second,
+ * so in order to throttle execution of things we want to do less frequently
+ * a macro is used: run_with_period(milliseconds) { .... }
+ */
+
int serverCron(struct aeEventLoop *eventLoop, long long id, void *clientData) {
- int j, loops = server.cronloops;
+ int j;
REDIS_NOTUSED(eventLoop);
REDIS_NOTUSED(id);
REDIS_NOTUSED(clientData);
+ /* Software watchdog: deliver the SIGALRM that will reach the signal
+ * handler if we don't return here fast enough. */
+ if (server.watchdog_period) watchdogScheduleSignal(server.watchdog_period);
+
/* We take a cached value of the unix time in the global state because
* with virtual memory and aging there is to store the current time
* in objects at every object access, and accuracy is not needed.
* To access a global var is faster than calling time(NULL) */
server.unixtime = time(NULL);
+ run_with_period(100) trackOperationsPerSecond();
+
/* We have just 22 bits per object for LRU information.
* So we use an (eventually wrapping) LRU clock with 10 seconds resolution.
* 2^22 bits with 10 seconds resoluton is more or less 1.5 years.
}
/* Show some info about non-empty databases */
- for (j = 0; j < server.dbnum; j++) {
- long long size, used, vkeys;
-
- size = dictSlots(server.db[j].dict);
- used = dictSize(server.db[j].dict);
- vkeys = dictSize(server.db[j].expires);
- if (!(loops % 50) && (used || vkeys)) {
- redisLog(REDIS_VERBOSE,"DB %d: %lld keys (%lld volatile) in %lld slots HT.",j,used,vkeys,size);
- /* dictPrintStats(server.dict); */
+ run_with_period(5000) {
+ for (j = 0; j < server.dbnum; j++) {
+ long long size, used, vkeys;
+
+ size = dictSlots(server.db[j].dict);
+ used = dictSize(server.db[j].dict);
+ vkeys = dictSize(server.db[j].expires);
+ if (used || vkeys) {
+ redisLog(REDIS_VERBOSE,"DB %d: %lld keys (%lld volatile) in %lld slots HT.",j,used,vkeys,size);
+ /* dictPrintStats(server.dict); */
+ }
}
}
* a lot of memory movements in the parent will cause a lot of pages
* copied. */
if (server.rdb_child_pid == -1 && server.aof_child_pid == -1) {
- if (!(loops % 10)) tryResizeHashTables();
+ tryResizeHashTables();
if (server.activerehashing) incrementallyRehash();
}
/* Show information about connected clients */
- if (!(loops % 50)) {
- redisLog(REDIS_VERBOSE,"%d clients connected (%d slaves), %zu bytes in use",
- listLength(server.clients)-listLength(server.slaves),
- listLength(server.slaves),
- zmalloc_used_memory());
+ if (!server.sentinel_mode) {
+ run_with_period(5000) {
+ redisLog(REDIS_VERBOSE,
+ "%d clients connected (%d slaves), %zu bytes in use",
+ listLength(server.clients)-listLength(server.slaves),
+ listLength(server.slaves),
+ zmalloc_used_memory());
+ }
}
- /* Close connections of timedout clients */
- if ((server.maxidletime && !(loops % 100)) || server.bpop_blocked_clients)
- closeTimedoutClients();
+ /* We need to do a few operations on clients asynchronously. */
+ clientsCron();
/* Start a scheduled AOF rewrite if this was requested by the user while
* a BGSAVE was in progress. */
updateDictResizePolicy();
}
} else {
- time_t now = time(NULL);
-
/* If there is not a background saving/rewrite in progress check if
* we have to save/rewrite now */
for (j = 0; j < server.saveparamslen; j++) {
struct saveparam *sp = server.saveparams+j;
if (server.dirty >= sp->changes &&
- now-server.lastsave > sp->seconds) {
+ server.unixtime-server.lastsave > sp->seconds) {
redisLog(REDIS_NOTICE,"%d changes in %d seconds. Saving...",
sp->changes, sp->seconds);
rdbSaveBackground(server.rdb_filename);
/* Replication cron function -- used to reconnect to master and
* to detect transfer failures. */
- if (!(loops % 10)) replicationCron();
+ run_with_period(1000) replicationCron();
/* Run other sub-systems specific cron jobs */
- if (server.cluster_enabled && !(loops % 10)) clusterCron();
+ run_with_period(1000) {
+ if (server.cluster_enabled) clusterCron();
+ }
+
+ /* Run the sentinel timer if we are in sentinel mode. */
+ run_with_period(100) {
+ if (server.sentinel_mode) sentinelTimer();
+ }
server.cronloops++;
- return 100;
+ return 1000/REDIS_HZ;
}
/* This function gets called every time Redis is entering the
"-LOADING Redis is loading the dataset in memory\r\n"));
shared.slowscripterr = createObject(REDIS_STRING,sdsnew(
"-BUSY Redis is busy running a script. You can only call SCRIPT KILL or SHUTDOWN NOSAVE.\r\n"));
+ shared.masterdownerr = createObject(REDIS_STRING,sdsnew(
+ "-MASTERDOWN Link with MASTER is down and slave-serve-stale-data is set to 'no'.\r\n"));
+ shared.bgsaveerr = createObject(REDIS_STRING,sdsnew(
+ "-MISCONF Redis is configured to save RDB snapshots, but is currently not able to persist on disk. Commands that may modify the data set are disabled. Please check Redis logs for details about the error.\r\n"));
+ shared.roslaveerr = createObject(REDIS_STRING,sdsnew(
+ "-READONLY You can't write against a read only slave.\r\n"));
+ shared.oomerr = createObject(REDIS_STRING,sdsnew(
+ "-OOM command not allowed when used memory > 'maxmemory'.\r\n"));
shared.space = createObject(REDIS_STRING,sdsnew(" "));
shared.colon = createObject(REDIS_STRING,sdsnew(":"));
shared.plus = createObject(REDIS_STRING,sdsnew("+"));
- shared.select0 = createStringObject("select 0\r\n",10);
- shared.select1 = createStringObject("select 1\r\n",10);
- shared.select2 = createStringObject("select 2\r\n",10);
- shared.select3 = createStringObject("select 3\r\n",10);
- shared.select4 = createStringObject("select 4\r\n",10);
- shared.select5 = createStringObject("select 5\r\n",10);
- shared.select6 = createStringObject("select 6\r\n",10);
- shared.select7 = createStringObject("select 7\r\n",10);
- shared.select8 = createStringObject("select 8\r\n",10);
- shared.select9 = createStringObject("select 9\r\n",10);
+
+ for (j = 0; j < REDIS_SHARED_SELECT_CMDS; j++) {
+ shared.select[j] = createObject(REDIS_STRING,
+ sdscatprintf(sdsempty(),"select %d\r\n", j));
+ }
shared.messagebulk = createStringObject("$7\r\nmessage\r\n",13);
shared.pmessagebulk = createStringObject("$8\r\npmessage\r\n",14);
shared.subscribebulk = createStringObject("$9\r\nsubscribe\r\n",15);
shared.psubscribebulk = createStringObject("$10\r\npsubscribe\r\n",17);
shared.punsubscribebulk = createStringObject("$12\r\npunsubscribe\r\n",19);
shared.del = createStringObject("DEL",3);
+ shared.rpop = createStringObject("RPOP",4);
+ shared.lpop = createStringObject("LPOP",4);
+ shared.lpush = createStringObject("LPUSH",5);
for (j = 0; j < REDIS_SHARED_INTEGERS; j++) {
shared.integers[j] = createObject(REDIS_STRING,(void*)(long)j);
shared.integers[j]->encoding = REDIS_ENCODING_INT;
}
void initServerConfig() {
+ getRandomHexChars(server.runid,REDIS_RUN_ID_SIZE);
+ server.runid[REDIS_RUN_ID_SIZE] = '\0';
server.arch_bits = (sizeof(long) == 8) ? 64 : 32;
server.port = REDIS_SERVERPORT;
server.bindaddr = NULL;
server.aof_rewrite_base_size = 0;
server.aof_rewrite_scheduled = 0;
server.aof_last_fsync = time(NULL);
+ server.aof_rewrite_time_last = -1;
+ server.aof_rewrite_time_start = -1;
+ server.aof_lastbgrewrite_status = REDIS_OK;
+ server.aof_delayed_fsync = 0;
server.aof_fd = -1;
server.aof_selected_db = -1; /* Make sure the first time will not match */
server.aof_flush_postponed_start = 0;
server.aof_filename = zstrdup("appendonly.aof");
server.requirepass = NULL;
server.rdb_compression = 1;
+ server.rdb_checksum = 1;
server.activerehashing = 1;
server.maxclients = REDIS_MAX_CLIENTS;
server.bpop_blocked_clients = 0;
server.maxmemory = 0;
server.maxmemory_policy = REDIS_MAXMEMORY_VOLATILE_LRU;
server.maxmemory_samples = 3;
- server.hash_max_zipmap_entries = REDIS_HASH_MAX_ZIPMAP_ENTRIES;
- server.hash_max_zipmap_value = REDIS_HASH_MAX_ZIPMAP_VALUE;
+ server.hash_max_ziplist_entries = REDIS_HASH_MAX_ZIPLIST_ENTRIES;
+ server.hash_max_ziplist_value = REDIS_HASH_MAX_ZIPLIST_VALUE;
server.list_max_ziplist_entries = REDIS_LIST_MAX_ZIPLIST_ENTRIES;
server.list_max_ziplist_value = REDIS_LIST_MAX_ZIPLIST_VALUE;
server.set_max_intset_entries = REDIS_SET_MAX_INTSET_ENTRIES;
server.repl_state = REDIS_REPL_NONE;
server.repl_syncio_timeout = REDIS_REPL_SYNCIO_TIMEOUT;
server.repl_serve_stale_data = 1;
- server.repl_down_since = -1;
+ server.repl_slave_ro = 1;
+ server.repl_down_since = time(NULL);
+ server.slave_priority = REDIS_DEFAULT_SLAVE_PRIORITY;
/* Client output buffer limits */
server.client_obuf_limits[REDIS_CLIENT_LIMIT_CLASS_NORMAL].hard_limit_bytes = 0;
populateCommandTable();
server.delCommand = lookupCommandByCString("del");
server.multiCommand = lookupCommandByCString("multi");
+ server.lpushCommand = lookupCommandByCString("lpush");
+ server.lpopCommand = lookupCommandByCString("lpop");
+ server.rpopCommand = lookupCommandByCString("rpop");
/* Slow log */
server.slowlog_log_slower_than = REDIS_SLOWLOG_LOG_SLOWER_THAN;
server.slowlog_max_len = REDIS_SLOWLOG_MAX_LEN;
- /* Assert */
+ /* Debugging */
server.assert_failed = "<no assertion failed>";
server.assert_file = "<no file>";
server.assert_line = 0;
server.bug_report_start = 0;
+ server.watchdog_period = 0;
}
/* This function will try to raise the max number of open files accordingly to
rlim_t maxfiles = server.maxclients+32;
struct rlimit limit;
- if (maxfiles < 1024) maxfiles = 1024;
if (getrlimit(RLIMIT_NOFILE,&limit) == -1) {
redisLog(REDIS_WARNING,"Unable to obtain the current NOFILE limit (%s), assuming 1024 and setting the max clients configuration accordingly.",
strerror(errno));
/* Set the max number of files if the current limit is not enough
* for our needs. */
if (oldlimit < maxfiles) {
- limit.rlim_cur = maxfiles;
- limit.rlim_max = maxfiles;
- if (setrlimit(RLIMIT_NOFILE,&limit) == -1) {
- server.maxclients = oldlimit-32;
+ rlim_t f;
+
+ f = maxfiles;
+ while(f > oldlimit) {
+ limit.rlim_cur = f;
+ limit.rlim_max = f;
+ if (setrlimit(RLIMIT_NOFILE,&limit) != -1) break;
+ f -= 128;
+ }
+ if (f < oldlimit) f = oldlimit;
+ if (f != maxfiles) {
+ server.maxclients = f-32;
redisLog(REDIS_WARNING,"Unable to set the max number of files limit to %d (%s), setting the max clients configuration to %d.",
(int) maxfiles, strerror(errno), (int) server.maxclients);
} else {
server.slaves = listCreate();
server.monitors = listCreate();
server.unblocked_clients = listCreate();
+ server.ready_keys = listCreate();
createSharedObjects();
adjustOpenFilesLimit();
server.db[j].dict = dictCreate(&dbDictType,NULL);
server.db[j].expires = dictCreate(&keyptrDictType,NULL);
server.db[j].blocking_keys = dictCreate(&keylistDictType,NULL);
+ server.db[j].ready_keys = dictCreate(&setDictType,NULL);
server.db[j].watched_keys = dictCreate(&keylistDictType,NULL);
server.db[j].id = j;
}
server.cronloops = 0;
server.rdb_child_pid = -1;
server.aof_child_pid = -1;
- server.aof_rewrite_buf = sdsempty();
+ aofRewriteBufferReset();
server.aof_buf = sdsempty();
server.lastsave = time(NULL);
+ server.rdb_save_time_last = -1;
+ server.rdb_save_time_start = -1;
server.dirty = 0;
server.stat_numcommands = 0;
server.stat_numconnections = 0;
server.stat_peak_memory = 0;
server.stat_fork_time = 0;
server.stat_rejected_conn = 0;
+ memset(server.ops_sec_samples,0,sizeof(server.ops_sec_samples));
+ server.ops_sec_idx = 0;
+ server.ops_sec_last_sample_time = mstime();
+ server.ops_sec_last_sample_ops = 0;
server.unixtime = time(NULL);
+ server.lastbgsave_status = REDIS_OK;
+ server.stop_writes_on_bgsave_err = 1;
aeCreateTimeEvent(server.el, 1, serverCron, NULL, NULL);
if (server.ipfd > 0 && aeCreateFileEvent(server.el,server.ipfd,AE_READABLE,
- acceptTcpHandler,NULL) == AE_ERR) oom("creating file event");
+ acceptTcpHandler,NULL) == AE_ERR) redisPanic("Unrecoverable error creating server.ipfd file event.");
if (server.sofd > 0 && aeCreateFileEvent(server.el,server.sofd,AE_READABLE,
- acceptUnixHandler,NULL) == AE_ERR) oom("creating file event");
+ acceptUnixHandler,NULL) == AE_ERR) redisPanic("Unrecoverable error creating server.sofd file event.");
if (server.aof_state == REDIS_AOF_ON) {
server.aof_fd = open(server.aof_filename,
case 's': c->flags |= REDIS_CMD_NOSCRIPT; break;
case 'R': c->flags |= REDIS_CMD_RANDOM; break;
case 'S': c->flags |= REDIS_CMD_SORT_FOR_SCRIPT; break;
+ case 'l': c->flags |= REDIS_CMD_LOADING; break;
+ case 't': c->flags |= REDIS_CMD_STALE; break;
default: redisPanic("Unsupported command flag"); break;
}
f++;
}
}
+/* ========================== Redis OP Array API ============================ */
+
+void redisOpArrayInit(redisOpArray *oa) {
+ oa->ops = NULL;
+ oa->numops = 0;
+}
+
+int redisOpArrayAppend(redisOpArray *oa, struct redisCommand *cmd, int dbid,
+ robj **argv, int argc, int target)
+{
+ redisOp *op;
+
+ oa->ops = zrealloc(oa->ops,sizeof(redisOp)*(oa->numops+1));
+ op = oa->ops+oa->numops;
+ op->cmd = cmd;
+ op->dbid = dbid;
+ op->argv = argv;
+ op->argc = argc;
+ op->target = target;
+ oa->numops++;
+ return oa->numops;
+}
+
+void redisOpArrayFree(redisOpArray *oa) {
+ while(oa->numops) {
+ int j;
+ redisOp *op;
+
+ oa->numops--;
+ op = oa->ops+oa->numops;
+ for (j = 0; j < op->argc; j++)
+ decrRefCount(op->argv[j]);
+ zfree(op->argv);
+ }
+ zfree(oa->ops);
+}
+
/* ====================== Commands lookup and execution ===================== */
struct redisCommand *lookupCommand(sds name) {
return cmd;
}
+/* Propagate the specified command (in the context of the specified database id)
+ * to AOF, Slaves and Monitors.
+ *
+ * flags are an xor between:
+ * + REDIS_PROPAGATE_NONE (no propagation of command at all)
+ * + REDIS_PROPAGATE_AOF (propagate into the AOF file if is enabled)
+ * + REDIS_PROPAGATE_REPL (propagate into the replication link)
+ */
+void propagate(struct redisCommand *cmd, int dbid, robj **argv, int argc,
+ int flags)
+{
+ if (server.aof_state != REDIS_AOF_OFF && flags & REDIS_PROPAGATE_AOF)
+ feedAppendOnlyFile(cmd,dbid,argv,argc);
+ if (flags & REDIS_PROPAGATE_REPL && listLength(server.slaves))
+ replicationFeedSlaves(server.slaves,dbid,argv,argc);
+}
+
+/* Used inside commands to schedule the propagation of additional commands
+ * after the current command is propagated to AOF / Replication. */
+void alsoPropagate(struct redisCommand *cmd, int dbid, robj **argv, int argc,
+ int target)
+{
+ redisOpArrayAppend(&server.also_propagate,cmd,dbid,argv,argc,target);
+}
+
/* Call() is the core of Redis execution of a command */
void call(redisClient *c, int flags) {
long long dirty, start = ustime(), duration;
+ /* Sent the command to clients in MONITOR mode, only if the commands are
+ * not geneated from reading an AOF. */
+ if (listLength(server.monitors) && !server.loading)
+ replicationFeedMonitors(c,server.monitors,c->db->id,c->argv,c->argc);
+
+ /* Call the command. */
+ redisOpArrayInit(&server.also_propagate);
dirty = server.dirty;
c->cmd->proc(c);
dirty = server.dirty-dirty;
if (server.loading && c->flags & REDIS_LUA_CLIENT)
flags &= ~(REDIS_CALL_SLOWLOG | REDIS_CALL_STATS);
+ /* Log the command into the Slow log if needed, and populate the
+ * per-command statistics that we show in INFO commandstats. */
if (flags & REDIS_CALL_SLOWLOG)
slowlogPushEntryIfNeeded(c->argv,c->argc,duration);
if (flags & REDIS_CALL_STATS) {
c->cmd->microseconds += duration;
c->cmd->calls++;
}
+
+ /* Propagate the command into the AOF and replication link */
if (flags & REDIS_CALL_PROPAGATE) {
- if (server.aof_state != REDIS_AOF_OFF && dirty > 0)
- feedAppendOnlyFile(c->cmd,c->db->id,c->argv,c->argc);
- if ((dirty > 0 || c->cmd->flags & REDIS_CMD_FORCE_REPLICATION) &&
- listLength(server.slaves))
- replicationFeedSlaves(server.slaves,c->db->id,c->argv,c->argc);
- if (listLength(server.monitors))
- replicationFeedMonitors(server.monitors,c->db->id,c->argv,c->argc);
+ int flags = REDIS_PROPAGATE_NONE;
+
+ if (c->cmd->flags & REDIS_CMD_FORCE_REPLICATION)
+ flags |= REDIS_PROPAGATE_REPL;
+ if (dirty)
+ flags |= (REDIS_PROPAGATE_REPL | REDIS_PROPAGATE_AOF);
+ if (flags != REDIS_PROPAGATE_NONE)
+ propagate(c->cmd,c->db->id,c->argv,c->argc,flags);
+ }
+ /* Commands such as LPUSH or BRPOPLPUSH may propagate an additional
+ * PUSH command. */
+ if (server.also_propagate.numops) {
+ int j;
+ redisOp *rop;
+
+ for (j = 0; j < server.also_propagate.numops; j++) {
+ rop = &server.also_propagate.ops[j];
+ propagate(rop->cmd, rop->dbid, rop->argv, rop->argc, rop->target);
+ }
+ redisOpArrayFree(&server.also_propagate);
}
server.stat_numcommands++;
}
if (server.maxmemory) {
int retval = freeMemoryIfNeeded();
if ((c->cmd->flags & REDIS_CMD_DENYOOM) && retval == REDIS_ERR) {
- addReplyError(c,
- "command not allowed when used memory > 'maxmemory'");
+ addReply(c, shared.oomerr);
return REDIS_OK;
}
}
+ /* Don't accept write commands if there are problems persisting on disk. */
+ if (server.stop_writes_on_bgsave_err &&
+ server.saveparamslen > 0
+ && server.lastbgsave_status == REDIS_ERR &&
+ c->cmd->flags & REDIS_CMD_WRITE)
+ {
+ addReply(c, shared.bgsaveerr);
+ return REDIS_OK;
+ }
+
+ /* Don't accept write commands if this is a read only slave. But
+ * accept write commands if this is our master. */
+ if (server.masterhost && server.repl_slave_ro &&
+ !(c->flags & REDIS_MASTER) &&
+ c->cmd->flags & REDIS_CMD_WRITE)
+ {
+ addReply(c, shared.roslaveerr);
+ return REDIS_OK;
+ }
+
/* Only allow SUBSCRIBE and UNSUBSCRIBE in the context of Pub/Sub */
if ((dictSize(c->pubsub_channels) > 0 || listLength(c->pubsub_patterns) > 0)
&&
* we are a slave with a broken link with master. */
if (server.masterhost && server.repl_state != REDIS_REPL_CONNECTED &&
server.repl_serve_stale_data == 0 &&
- c->cmd->proc != infoCommand && c->cmd->proc != slaveofCommand)
+ !(c->cmd->flags & REDIS_CMD_STALE))
{
- addReplyError(c,
- "link with MASTER is down and slave-serve-stale-data is set to no");
+ addReply(c, shared.masterdownerr);
return REDIS_OK;
}
- /* Loading DB? Return an error if the command is not INFO */
- if (server.loading && c->cmd->proc != infoCommand) {
+ /* Loading DB? Return an error if the command has not the
+ * REDIS_CMD_LOADING flag. */
+ if (server.loading && !(c->cmd->flags & REDIS_CMD_LOADING)) {
addReply(c, shared.loadingerr);
return REDIS_OK;
}
- /* Lua script too slow? Only allow SHUTDOWN NOSAVE and SCRIPT KILL. */
+ /* Lua script too slow? Only allow commands with REDIS_CMD_STALE flag. */
if (server.lua_timedout &&
- !(c->cmd->proc != shutdownCommand &&
+ !(c->cmd->proc == shutdownCommand &&
c->argc == 2 &&
tolower(((char*)c->argv[1]->ptr)[0]) == 'n') &&
!(c->cmd->proc == scriptCommand &&
addReply(c,shared.queued);
} else {
call(c,REDIS_CALL_FULL);
+ if (listLength(server.ready_keys))
+ handleClientsBlockedOnLists();
}
return REDIS_OK;
}
/*================================== Commands =============================== */
+/* Return zero if strings are the same, non-zero if they are not.
+ * The comparison is performed in a way that prevents an attacker to obtain
+ * information about the nature of the strings just monitoring the execution
+ * time of the function.
+ *
+ * Note that limiting the comparison length to strings up to 512 bytes we
+ * can avoid leaking any information about the password length and any
+ * possible branch misprediction related leak.
+ */
+int time_independent_strcmp(char *a, char *b) {
+ char bufa[REDIS_AUTHPASS_MAX_LEN], bufb[REDIS_AUTHPASS_MAX_LEN];
+ /* The above two strlen perform len(a) + len(b) operations where either
+ * a or b are fixed (our password) length, and the difference is only
+ * relative to the length of the user provided string, so no information
+ * leak is possible in the following two lines of code. */
+ int alen = strlen(a);
+ int blen = strlen(b);
+ int j;
+ int diff = 0;
+
+ /* We can't compare strings longer than our static buffers.
+ * Note that this will never pass the first test in practical circumstances
+ * so there is no info leak. */
+ if (alen > sizeof(bufa) || blen > sizeof(bufb)) return 1;
+
+ memset(bufa,0,sizeof(bufa)); /* Constant time. */
+ memset(bufb,0,sizeof(bufb)); /* Constant time. */
+ /* Again the time of the following two copies is proportional to
+ * len(a) + len(b) so no info is leaked. */
+ memcpy(bufa,a,alen);
+ memcpy(bufb,b,blen);
+
+ /* Always compare all the chars in the two buffers without
+ * conditional expressions. */
+ for (j = 0; j < sizeof(bufa); j++) {
+ diff |= (bufa[j] ^ bufb[j]);
+ }
+ /* Length must be equal as well. */
+ diff |= alen ^ blen;
+ return diff; /* If zero strings are the same. */
+}
+
void authCommand(redisClient *c) {
if (!server.requirepass) {
addReplyError(c,"Client sent AUTH, but no password is set");
- } else if (!strcmp(c->argv[1]->ptr, server.requirepass)) {
+ } else if (!time_independent_strcmp(c->argv[1]->ptr, server.requirepass)) {
c->authenticated = 1;
addReply(c,shared.ok);
} else {
addReplyBulk(c,c->argv[1]);
}
+void timeCommand(redisClient *c) {
+ struct timeval tv;
+
+ /* gettimeofday() can only fail if &tv is a bad addresss so we
+ * don't check for errors. */
+ gettimeofday(&tv,NULL);
+ addReplyMultiBulkLen(c,2);
+ addReplyBulkLongLong(c,tv.tv_sec);
+ addReplyBulkLongLong(c,tv.tv_usec);
+}
+
/* Convert an amount of bytes into a human readable string in the form
* of 100B, 2G, 100M, 4K, and so forth. */
void bytesToHuman(char *s, unsigned long long n) {
* on memory corruption problems. */
sds genRedisInfoString(char *section) {
sds info = sdsempty();
- time_t uptime = time(NULL)-server.stat_starttime;
+ time_t uptime = server.unixtime-server.stat_starttime;
int j, numcommands;
struct rusage self_ru, c_ru;
unsigned long lol, bib;
int allsections = 0, defsections = 0;
int sections = 0;
-
+
if (section) {
allsections = strcasecmp(section,"all") == 0;
defsections = strcasecmp(section,"default") == 0;
/* Server */
if (allsections || defsections || !strcasecmp(section,"server")) {
+ struct utsname name;
+ char *mode;
+
+ if (server.cluster_enabled) mode = "cluster";
+ else if (server.sentinel_mode) mode = "sentinel";
+ else mode = "standalone";
+
if (sections++) info = sdscat(info,"\r\n");
+ uname(&name);
info = sdscatprintf(info,
"# Server\r\n"
"redis_version:%s\r\n"
"redis_git_sha1:%s\r\n"
"redis_git_dirty:%d\r\n"
+ "redis_mode:%s\r\n"
+ "os:%s %s %s\r\n"
"arch_bits:%d\r\n"
"multiplexing_api:%s\r\n"
"gcc_version:%d.%d.%d\r\n"
"process_id:%ld\r\n"
+ "run_id:%s\r\n"
"tcp_port:%d\r\n"
"uptime_in_seconds:%ld\r\n"
"uptime_in_days:%ld\r\n"
REDIS_VERSION,
redisGitSHA1(),
strtol(redisGitDirty(),NULL,10) > 0,
+ mode,
+ name.sysname, name.release, name.machine,
server.arch_bits,
aeGetApiName(),
#ifdef __GNUC__
0,0,0,
#endif
(long) getpid(),
+ server.runid,
server.port,
uptime,
uptime/(3600*24),
info = sdscatprintf(info,
"# Persistence\r\n"
"loading:%d\r\n"
+ "rdb_changes_since_last_save:%lld\r\n"
+ "rdb_bgsave_in_progress:%d\r\n"
+ "rdb_last_save_time:%ld\r\n"
+ "rdb_last_bgsave_status:%s\r\n"
+ "rdb_last_bgsave_time_sec:%ld\r\n"
+ "rdb_current_bgsave_time_sec:%ld\r\n"
"aof_enabled:%d\r\n"
- "changes_since_last_save:%lld\r\n"
- "bgsave_in_progress:%d\r\n"
- "last_save_time:%ld\r\n"
- "bgrewriteaof_in_progress:%d\r\n",
+ "aof_rewrite_in_progress:%d\r\n"
+ "aof_rewrite_scheduled:%d\r\n"
+ "aof_last_rewrite_time_sec:%ld\r\n"
+ "aof_current_rewrite_time_sec:%ld\r\n"
+ "aof_last_bgrewrite_status:%s\r\n",
server.loading,
- server.aof_state != REDIS_AOF_OFF,
server.dirty,
server.rdb_child_pid != -1,
server.lastsave,
- server.aof_child_pid != -1);
+ (server.lastbgsave_status == REDIS_OK) ? "ok" : "err",
+ server.rdb_save_time_last,
+ (server.rdb_child_pid == -1) ?
+ -1 : time(NULL)-server.rdb_save_time_start,
+ server.aof_state != REDIS_AOF_OFF,
+ server.aof_child_pid != -1,
+ server.aof_rewrite_scheduled,
+ server.aof_rewrite_time_last,
+ (server.aof_child_pid == -1) ?
+ -1 : time(NULL)-server.aof_rewrite_time_start,
+ (server.aof_lastbgrewrite_status == REDIS_OK) ? "ok" : "err");
if (server.aof_state != REDIS_AOF_OFF) {
info = sdscatprintf(info,
"aof_base_size:%lld\r\n"
"aof_pending_rewrite:%d\r\n"
"aof_buffer_length:%zu\r\n"
- "aof_pending_bio_fsync:%llu\r\n",
+ "aof_rewrite_buffer_length:%lu\r\n"
+ "aof_pending_bio_fsync:%llu\r\n"
+ "aof_delayed_fsync:%lu\r\n",
(long long) server.aof_current_size,
(long long) server.aof_rewrite_base_size,
server.aof_rewrite_scheduled,
sdslen(server.aof_buf),
- bioPendingJobsOfType(REDIS_BIO_AOF_FSYNC));
+ aofRewriteBufferSize(),
+ bioPendingJobsOfType(REDIS_BIO_AOF_FSYNC),
+ server.aof_delayed_fsync);
}
if (server.loading) {
perc = ((double)server.loading_loaded_bytes /
server.loading_total_bytes) * 100;
- elapsed = time(NULL)-server.loading_start_time;
+ elapsed = server.unixtime-server.loading_start_time;
if (elapsed == 0) {
eta = 1; /* A fake 1 second figure if we don't have
enough info */
"# Stats\r\n"
"total_connections_received:%lld\r\n"
"total_commands_processed:%lld\r\n"
+ "instantaneous_ops_per_sec:%lld\r\n"
"rejected_connections:%lld\r\n"
"expired_keys:%lld\r\n"
"evicted_keys:%lld\r\n"
"latest_fork_usec:%lld\r\n",
server.stat_numconnections,
server.stat_numcommands,
+ getOperationsPerSecond(),
server.stat_rejected_conn,
server.stat_expiredkeys,
server.stat_evictedkeys,
(server.repl_state == REDIS_REPL_CONNECTED) ?
"up" : "down",
server.master ?
- ((int)(time(NULL)-server.master->lastinteraction)) : -1,
+ ((int)(server.unixtime-server.master->lastinteraction)) : -1,
server.repl_state == REDIS_REPL_TRANSFER
);
if (server.repl_state == REDIS_REPL_TRANSFER) {
info = sdscatprintf(info,
- "master_sync_left_bytes:%ld\r\n"
+ "master_sync_left_bytes:%lld\r\n"
"master_sync_last_io_seconds_ago:%d\r\n"
- ,(long)server.repl_transfer_left,
- (int)(time(NULL)-server.repl_transfer_lastio)
+ , (long long)
+ (server.repl_transfer_size - server.repl_transfer_read),
+ (int)(server.unixtime-server.repl_transfer_lastio)
);
}
if (server.repl_state != REDIS_REPL_CONNECTED) {
info = sdscatprintf(info,
"master_link_down_since_seconds:%ld\r\n",
- (long)time(NULL)-server.repl_down_since);
+ (long)server.unixtime-server.repl_down_since);
}
+ info = sdscatprintf(info,
+ "slave_priority:%d\r\n", server.slave_priority);
}
info = sdscatprintf(info,
"connected_slaves:%lu\r\n",
}
if (state == NULL) continue;
info = sdscatprintf(info,"slave%d:%s,%d,%s\r\n",
- slaveid,ip,port,state);
+ slaveid,ip,slave->slave_listening_port,state);
slaveid++;
}
}
}
}
- /* Clusetr */
+ /* Cluster */
if (allsections || defsections || !strcasecmp(section,"cluster")) {
if (sections++) info = sdscat(info,"\r\n");
info = sdscatprintf(info,
int freeMemoryIfNeeded(void) {
size_t mem_used, mem_tofree, mem_freed;
int slaves = listLength(server.slaves);
- static time_t xt;
- int debug = 0;
-
- if (xt != time(NULL)) {
- debug = 1;
- xt = time(NULL);
- }
/* Remove the size of slaves output buffers and AOF buffer from the
* count of used memory. */
mem_used = zmalloc_used_memory();
- if (debug) printf("used_full: %zu\n", mem_used);
if (slaves) {
listIter li;
listNode *ln;
mem_used -= obuf_bytes;
}
}
- if (debug) printf("used_nosl: %zu\n", mem_used);
if (server.aof_state != REDIS_AOF_OFF) {
mem_used -= sdslen(server.aof_buf);
- mem_used -= sdslen(server.aof_rewrite_buf);
+ mem_used -= aofRewriteBufferSize();
}
/* Check if we are over the memory limit. */
/* Compute how much memory we need to free. */
mem_tofree = mem_used - server.maxmemory;
mem_freed = 0;
- if (debug) printf("tofree: %zu\n", mem_tofree);
while (mem_freed < mem_tofree) {
int j, k, keys_freed = 0;
if (slaves) flushSlavesOutputBuffers();
}
}
- if (!keys_freed) {
- if (debug) printf("-freed: %zu\n\n", mem_freed);
- return REDIS_ERR; /* nothing to free... */
- }
+ if (!keys_freed) return REDIS_ERR; /* nothing to free... */
}
- if (debug) printf("+freed: %zu\n\n", mem_freed);
return REDIS_OK;
}
}
void version() {
- printf("Redis server version %s (%s:%d)\n", REDIS_VERSION,
- redisGitSHA1(), atoi(redisGitDirty()) > 0);
+ printf("Redis server v=%s sha=%s:%d malloc=%s bits=%d\n",
+ REDIS_VERSION,
+ redisGitSHA1(),
+ atoi(redisGitDirty()) > 0,
+ ZMALLOC_LIB,
+ sizeof(long) == 4 ? 32 : 64);
exit(0);
}
fprintf(stderr,"Usage: ./redis-server [/path/to/redis.conf] [options]\n");
fprintf(stderr," ./redis-server - (read config from stdin)\n");
fprintf(stderr," ./redis-server -v or --version\n");
- fprintf(stderr," ./redis-server -h or --help\n\n");
+ fprintf(stderr," ./redis-server -h or --help\n");
+ fprintf(stderr," ./redis-server --test-memory <megabytes>\n\n");
fprintf(stderr,"Examples:\n");
fprintf(stderr," ./redis-server (run the server with default conf)\n");
fprintf(stderr," ./redis-server /etc/redis/6379.conf\n");
fprintf(stderr," ./redis-server --port 7777\n");
fprintf(stderr," ./redis-server --port 7777 --slaveof 127.0.0.1 8888\n");
- fprintf(stderr," ./redis-server /etc/myredis.conf --loglevel verbose\n");
+ fprintf(stderr," ./redis-server /etc/myredis.conf --loglevel verbose\n\n");
+ fprintf(stderr,"Sentinel mode:\n");
+ fprintf(stderr," ./redis-server /etc/sentinel.conf --sentinel\n");
exit(1);
}
void redisAsciiArt(void) {
#include "asciilogo.h"
char *buf = zmalloc(1024*16);
+ char *mode = "stand alone";
+
+ if (server.cluster_enabled) mode = "cluster";
+ else if (server.sentinel_mode) mode = "sentinel";
snprintf(buf,1024*16,ascii_logo,
REDIS_VERSION,
redisGitSHA1(),
strtol(redisGitDirty(),NULL,10) > 0,
(sizeof(long) == 8) ? "64" : "32",
- server.cluster_enabled ? "cluster" : "stand alone",
- server.port,
+ mode, server.port,
(long) getpid()
);
redisLogRaw(REDIS_NOTICE|REDIS_LOG_RAW,buf);
static void sigtermHandler(int sig) {
REDIS_NOTUSED(sig);
- redisLog(REDIS_WARNING,"Received SIGTERM, scheduling shutdown...");
+ redisLogFromHandler(REDIS_WARNING,"Received SIGTERM, scheduling shutdown...");
server.shutdown_asap = 1;
}
/* When the SA_SIGINFO flag is set in sa_flags then sa_sigaction is used.
* Otherwise, sa_handler is used. */
sigemptyset(&act.sa_mask);
- act.sa_flags = SA_NODEFER | SA_ONSTACK | SA_RESETHAND;
+ act.sa_flags = 0;
act.sa_handler = sigtermHandler;
sigaction(SIGTERM, &act, NULL);
#ifdef HAVE_BACKTRACE
sigemptyset(&act.sa_mask);
- act.sa_flags = SA_NODEFER | SA_ONSTACK | SA_RESETHAND | SA_SIGINFO;
+ act.sa_flags = SA_NODEFER | SA_RESETHAND | SA_SIGINFO;
act.sa_sigaction = sigsegvHandler;
sigaction(SIGSEGV, &act, NULL);
sigaction(SIGBUS, &act, NULL);
return;
}
+void memtest(size_t megabytes, int passes);
+
+/* Returns 1 if there is --sentinel among the arguments or if
+ * argv[0] is exactly "redis-sentinel". */
+int checkForSentinelMode(int argc, char **argv) {
+ int j;
+
+ if (strstr(argv[0],"redis-sentinel") != NULL) return 1;
+ for (j = 1; j < argc; j++)
+ if (!strcmp(argv[j],"--sentinel")) return 1;
+ return 0;
+}
+
+/* Function called at startup to load RDB or AOF file in memory. */
+void loadDataFromDisk(void) {
+ long long start = ustime();
+ if (server.aof_state == REDIS_AOF_ON) {
+ if (loadAppendOnlyFile(server.aof_filename) == REDIS_OK)
+ redisLog(REDIS_NOTICE,"DB loaded from append only file: %.3f seconds",(float)(ustime()-start)/1000000);
+ } else {
+ if (rdbLoad(server.rdb_filename) == REDIS_OK) {
+ redisLog(REDIS_NOTICE,"DB loaded from disk: %.3f seconds",
+ (float)(ustime()-start)/1000000);
+ } else if (errno != ENOENT) {
+ redisLog(REDIS_WARNING,"Fatal error loading the DB. Exiting.");
+ exit(1);
+ }
+ }
+}
+
+void redisOutOfMemoryHandler(size_t allocation_size) {
+ redisLog(REDIS_WARNING,"Out Of Memory allocating %zu bytes!",
+ allocation_size);
+ redisPanic("OOM");
+}
+
int main(int argc, char **argv) {
- long long start;
struct timeval tv;
/* We need to initialize our libraries, and the server configuration. */
zmalloc_enable_thread_safeness();
+ zmalloc_set_oom_handler(redisOutOfMemoryHandler);
srand(time(NULL)^getpid());
gettimeofday(&tv,NULL);
dictSetHashFunctionSeed(tv.tv_sec^tv.tv_usec^getpid());
+ server.sentinel_mode = checkForSentinelMode(argc,argv);
initServerConfig();
+ /* We need to init sentinel right now as parsing the configuration file
+ * in sentinel mode will have the effect of populating the sentinel
+ * data structures with master nodes to monitor. */
+ if (server.sentinel_mode) {
+ initSentinelConfig();
+ initSentinel();
+ }
+
if (argc >= 2) {
int j = 1; /* First option to parse in argv[] */
sds options = sdsempty();
strcmp(argv[1], "--version") == 0) version();
if (strcmp(argv[1], "--help") == 0 ||
strcmp(argv[1], "-h") == 0) usage();
+ if (strcmp(argv[1], "--test-memory") == 0) {
+ if (argc == 3) {
+ memtest(atoi(argv[2]),50);
+ exit(0);
+ } else {
+ fprintf(stderr,"Please specify the amount of memory to test in megabytes.\n");
+ fprintf(stderr,"Example: ./redis-server --test-memory 4096\n\n");
+ exit(1);
+ }
+ }
+
/* First argument is the config file name? */
if (argv[j][0] != '-' || argv[j][1] != '-')
configfile = argv[j++];
loadServerConfig(configfile,options);
sdsfree(options);
} else {
- redisLog(REDIS_WARNING,"Warning: no config file specified, using the default config. In order to specify a config file use 'redis-server /path/to/redis.conf'");
+ redisLog(REDIS_WARNING, "Warning: no config file specified, using the default config. In order to specify a config file use %s /path/to/%s.conf", argv[0], server.sentinel_mode ? "sentinel" : "redis");
}
if (server.daemonize) daemonize();
initServer();
if (server.daemonize) createPidFile();
redisAsciiArt();
- redisLog(REDIS_WARNING,"Server started, Redis version " REDIS_VERSION);
-#ifdef __linux__
- linuxOvercommitMemoryWarning();
-#endif
- start = ustime();
- if (server.aof_state == REDIS_AOF_ON) {
- if (loadAppendOnlyFile(server.aof_filename) == REDIS_OK)
- redisLog(REDIS_NOTICE,"DB loaded from append only file: %.3f seconds",(float)(ustime()-start)/1000000);
- } else {
- if (rdbLoad(server.rdb_filename) == REDIS_OK) {
- redisLog(REDIS_NOTICE,"DB loaded from disk: %.3f seconds",
- (float)(ustime()-start)/1000000);
- } else if (errno != ENOENT) {
- redisLog(REDIS_WARNING,"Fatal error loading the DB. Exiting.");
- exit(1);
- }
+
+ if (!server.sentinel_mode) {
+ /* Things only needed when not runnign in Sentinel mode. */
+ redisLog(REDIS_WARNING,"Server started, Redis version " REDIS_VERSION);
+ #ifdef __linux__
+ linuxOvercommitMemoryWarning();
+ #endif
+ loadDataFromDisk();
+ if (server.ipfd > 0)
+ redisLog(REDIS_NOTICE,"The server is now ready to accept connections on port %d", server.port);
+ if (server.sofd > 0)
+ redisLog(REDIS_NOTICE,"The server is now ready to accept connections at %s", server.unixsocket);
}
- if (server.ipfd > 0)
- redisLog(REDIS_NOTICE,"The server is now ready to accept connections on port %d", server.port);
- if (server.sofd > 0)
- redisLog(REDIS_NOTICE,"The server is now ready to accept connections at %s", server.unixsocket);
+
aeSetBeforeSleepProc(server.el,beforeSleep);
aeMain(server.el);
aeDeleteEventLoop(server.el);
projects / redis.git / blobdiff