unit/protocol
unit/basic
unit/type/list
+ unit/type/list-2
+ unit/type/list-3
unit/type/set
unit/type/zset
unit/type/hash
unit/sort
unit/expire
unit/other
- unit/cas
+ unit/multi
unit/quit
+ unit/aofrw
integration/replication
+ integration/replication-2
+ integration/replication-3
+ integration/replication-4
integration/aof
+ integration/rdb
+ integration/convert-zipmap-hash-on-load
unit/pubsub
unit/slowlog
+ unit/scripting
+ unit/maxmemory
+ unit/introspection
+ unit/limits
+ unit/obuf-limits
+ unit/dump
+ unit/bitops
}
# Index to the next test to run in the ::all_tests list.
set ::next_test 0
set ::host 127.0.0.1
-set ::port 16379
+set ::port 21111
set ::traceleaks 0
set ::valgrind 0
set ::verbose 0
+set ::quiet 0
set ::denytags {}
set ::allowtags {}
set ::external 0; # If "1" this means, we are running against external instance
set ::file ""; # If set, runs only the tests in this comma separated list
set ::curfile ""; # Hold the filename of the current suite
+set ::accurate 0; # If true runs fuzz tests with more iterations
+set ::force_failure 0
# Set to 1 when we are running in client mode. The Redis test uses a
# server-client model to run tests simultaneously. The server instance
set path "tests/$name.tcl"
set ::curfile $path
source $path
- send_data_packet $::test_server_fd done "$name finished"
+ send_data_packet $::test_server_fd done "$name"
}
# Setup a list to hold a stack of server configs. When calls to start_server
}
# re-set $srv in the servers list
- set ::servers [lreplace $::servers end+$level 1 $srv]
+ lset ::servers end+$level $srv
}
proc redis_deferring_client {args} {
}
proc cleanup {} {
- puts -nonewline "Cleanup: warning may take some time... "
+ if {!$::quiet} {puts -nonewline "Cleanup: may take some time... "}
flush stdout
catch {exec rm -rf {*}[glob tests/tmp/redis.conf.*]}
catch {exec rm -rf {*}[glob tests/tmp/server.*]}
- puts "OK"
+ if {!$::quiet} {puts "OK"}
+}
+
+proc find_available_port start {
+ for {set j $start} {$j < $start+1024} {incr j} {
+ if {[catch {
+ set fd [socket 127.0.0.1 $j]
+ }]} {
+ return $j
+ } else {
+ close $fd
+ }
+ }
+ if {$j == $start+1024} {
+ error "Can't find a non busy port in the $start-[expr {$start+1023}] range."
+ }
}
proc test_server_main {} {
cleanup
# Open a listening socket, trying different ports in order to find a
# non busy one.
- set port 11111
- while 1 {
+ set port [find_available_port 11111]
+ if {!$::quiet} {
puts "Starting test server at port $port"
- if {[catch {socket -server accept_test_clients $port} e]} {
- if {[string match {*address already in use*} $e]} {
- if {$port == 20000} {
- puts "Can't find an available TCP port for test server."
- exit 1
- } else {
- incr port
- }
- } else {
- puts "Fatal error starting test server: $e"
- exit 1
- }
- } else {
- break
- }
}
+ socket -server accept_test_clients $port
# Start the client instances
+ set ::clients_pids {}
+ set start_port [expr {$::port+100}]
for {set j 0} {$j < $::numclients} {incr j} {
- exec tclsh8.5 [info script] {*}$::argv \
- --client $port --port [expr {$::port+($j*10)}] &
+ set start_port [find_available_port $start_port]
+ set p [exec tclsh8.5 [info script] {*}$::argv \
+ --client $port --port $start_port &]
+ lappend ::clients_pids $p
+ incr start_port 10
}
# Setup global state for the test server
set ::idle_clients {}
set ::active_clients {}
+ array set ::clients_start_time {}
+ set ::clients_time_history {}
+ set ::failed_tests {}
# Enter the event loop to handle clients I/O
after 100 test_server_cron
set bytes [gets $fd]
set payload [read $fd $bytes]
foreach {status data} $payload break
- puts "($fd) \[$status\]: $data"
if {$status eq {ready}} {
+ if {!$::quiet} {
+ puts "\[$status\]: $data"
+ }
signal_idle_client $fd
} elseif {$status eq {done}} {
+ set elapsed [expr {[clock seconds]-$::clients_start_time($fd)}]
+ set all_tests_count [llength $::all_tests]
+ set running_tests_count [expr {[llength $::active_clients]-1}]
+ set completed_tests_count [expr {$::next_test-$running_tests_count}]
+ puts "\[$completed_tests_count/$all_tests_count [colorstr yellow $status]\]: $data ($elapsed seconds)"
+ lappend ::clients_time_history $elapsed $data
signal_idle_client $fd
- puts "+++ [llength $::active_clients] units still in execution."
+ } elseif {$status eq {ok}} {
+ if {!$::quiet} {
+ puts "\[[colorstr green $status]\]: $data"
+ }
+ } elseif {$status eq {err}} {
+ set err "\[[colorstr red $status]\]: $data"
+ puts $err
+ lappend ::failed_tests $err
+ } elseif {$status eq {exception}} {
+ puts "\[[colorstr red $status]\]: $data"
+ foreach p $::clients_pids {
+ catch {exec kill -9 $p}
+ }
+ exit 1
+ } elseif {$status eq {testing}} {
+ # No op
+ } else {
+ if {!$::quiet} {
+ puts "\[$status\]: $data"
+ }
}
}
[lsearch -all -inline -not -exact $::active_clients $fd]
# New unit to process?
if {$::next_test != [llength $::all_tests]} {
- puts "Spawing new test process for: [lindex $::all_tests $::next_test]"
+ if {!$::quiet} {
+ puts [colorstr bold-white "Testing [lindex $::all_tests $::next_test]"]
+ }
+ set ::clients_start_time($fd) [clock seconds]
send_data_packet $fd run [lindex $::all_tests $::next_test]
lappend ::active_clients $fd
incr ::next_test
# executed, so the test finished.
proc the_end {} {
# TODO: print the status, exit with the rigth exit code.
- puts "The End"
- exit 1
+ puts "\n The End\n"
+ puts "Execution time of different units:"
+ foreach {time name} $::clients_time_history {
+ puts " $time seconds - $name"
+ }
+ if {[llength $::failed_tests]} {
+ puts "\n[colorstr bold-red {!!! WARNING}] The following tests failed:\n"
+ foreach failed $::failed_tests {
+ puts "*** $failed"
+ }
+ cleanup
+ exit 1
+ } else {
+ puts "\n[colorstr bold-white {\o/}] [colorstr bold-green {All tests passed without errors!}]\n"
+ cleanup
+ exit 0
+ }
}
# The client is not even driven (the test server is instead) as we just need
flush $fd
}
+proc print_help_screen {} {
+ puts [join {
+ "--valgrind Run the test over valgrind."
+ "--accurate Run slow randomized tests for more iterations."
+ "--quiet Don't show individual tests."
+ "--single <unit> Just execute the specified unit (see next option)."
+ "--list-tests List all the available test units."
+ "--clients <num> Number of test clients (16)."
+ "--force-failure Force the execution of a test that always fails."
+ "--help Print this help screen."
+ } "\n"]
+}
+
# parse arguments
for {set j 0} {$j < [llength $argv]} {incr j} {
set opt [lindex $argv $j]
incr j
} elseif {$opt eq {--valgrind}} {
set ::valgrind 1
- } elseif {$opt eq {--file}} {
- set ::file $arg
- incr j
+ } elseif {$opt eq {--quiet}} {
+ set ::quiet 1
} elseif {$opt eq {--host}} {
set ::external 1
set ::host $arg
} elseif {$opt eq {--port}} {
set ::port $arg
incr j
- } elseif {$opt eq {--verbose}} {
- set ::verbose 1
+ } elseif {$opt eq {--accurate}} {
+ set ::accurate 1
+ } elseif {$opt eq {--force-failure}} {
+ set ::force_failure 1
+ } elseif {$opt eq {--single}} {
+ set ::all_tests $arg
+ incr j
+ } elseif {$opt eq {--list-tests}} {
+ foreach t $::all_tests {
+ puts $t
+ }
+ exit 0
} elseif {$opt eq {--client}} {
set ::client 1
set ::test_server_port $arg
incr j
+ } elseif {$opt eq {--clients}} {
+ set ::numclients $arg
+ incr j
+ } elseif {$opt eq {--help}} {
+ print_help_screen
+ exit 0
} else {
puts "Wrong argument: $opt"
exit 1
}
}
+# With the parallel test running multiple Redis instances at the same time
+# we need a fast enough computer, otherwise a lot of tests may generate
+# false positives.
+# If the computer is too slow we revert the sequetial test without any
+# parallelism, that is, clients == 1.
+proc is_a_slow_computer {} {
+ set start [clock milliseconds]
+ for {set j 0} {$j < 1000000} {incr j} {}
+ set elapsed [expr [clock milliseconds]-$start]
+ expr {$elapsed > 200}
+}
+
if {$::client} {
if {[catch { test_client_main $::test_server_port } err]} {
set estr "Executing test client: $err.\n$::errorInfo"
exit 1
}
} else {
+ if {[is_a_slow_computer]} {
+ puts "** SLOW COMPUTER ** Using a single client to avoid false positives."
+ set ::numclients 1
+ }
+
if {[catch { test_server_main } err]} {
if {[string length $err] > 0} {
# only display error when not generated by the test suite
projects / redis.git / blobdiff