[redis.git] / deps / lua / Makefile

# makefile for installing Lua
# see INSTALL for installation instructions
# see src/Makefile and src/luaconf.h for further customization

# == CHANGE THE SETTINGS BELOW TO SUIT YOUR ENVIRONMENT =======================

# Your platform. See PLATS for possible values.
PLAT= none

# Where to install. The installation starts in the src and doc directories,
# so take care if INSTALL_TOP is not an absolute path.
INSTALL_TOP= /usr/local
INSTALL_BIN= $(INSTALL_TOP)/bin
INSTALL_INC= $(INSTALL_TOP)/include
INSTALL_LIB= $(INSTALL_TOP)/lib
INSTALL_MAN= $(INSTALL_TOP)/man/man1
#
# You probably want to make INSTALL_LMOD and INSTALL_CMOD consistent with
# LUA_ROOT, LUA_LDIR, and LUA_CDIR in luaconf.h (and also with etc/lua.pc).
INSTALL_LMOD= $(INSTALL_TOP)/share/lua/$V
INSTALL_CMOD= $(INSTALL_TOP)/lib/lua/$V

# How to install. If your install program does not support "-p", then you
# may have to run ranlib on the installed liblua.a (do "make ranlib").
INSTALL= install -p
INSTALL_EXEC= $(INSTALL) -m 0755
INSTALL_DATA= $(INSTALL) -m 0644
#
# If you don't have install you can use cp instead.
# INSTALL= cp -p
# INSTALL_EXEC= $(INSTALL)
# INSTALL_DATA= $(INSTALL)

# Utilities.
MKDIR= mkdir -p
RANLIB= ranlib

# == END OF USER SETTINGS. NO NEED TO CHANGE ANYTHING BELOW THIS LINE =========

# Convenience platforms targets.
PLATS= aix ansi bsd freebsd generic linux macosx mingw posix solaris

# What to install.
TO_BIN= lua luac
TO_INC= lua.h luaconf.h lualib.h lauxlib.h ../etc/lua.hpp
TO_LIB= liblua.a
TO_MAN= lua.1 luac.1

# Lua version and release.
V= 5.1
R= 5.1.4

all:	$(PLAT)

$(PLATS) clean:
	cd src && $(MAKE) $@

test:	dummy
	src/lua test/hello.lua

install: dummy
	cd src && $(MKDIR) $(INSTALL_BIN) $(INSTALL_INC) $(INSTALL_LIB) $(INSTALL_MAN) $(INSTALL_LMOD) $(INSTALL_CMOD)
	cd src && $(INSTALL_EXEC) $(TO_BIN) $(INSTALL_BIN)
	cd src && $(INSTALL_DATA) $(TO_INC) $(INSTALL_INC)
	cd src && $(INSTALL_DATA) $(TO_LIB) $(INSTALL_LIB)
	cd doc && $(INSTALL_DATA) $(TO_MAN) $(INSTALL_MAN)

ranlib:
	cd src && cd $(INSTALL_LIB) && $(RANLIB) $(TO_LIB)

local:
	$(MAKE) install INSTALL_TOP=..

none:
	@echo "Please do"
	@echo "   make PLATFORM"
	@echo "where PLATFORM is one of these:"
	@echo "   $(PLATS)"
	@echo "See INSTALL for complete instructions."

# make may get confused with test/ and INSTALL in a case-insensitive OS
dummy:

# echo config parameters
echo:
	@echo ""
	@echo "These are the parameters currently set in src/Makefile to build Lua $R:"
	@echo ""
	@cd src && $(MAKE) -s echo
	@echo ""
	@echo "These are the parameters currently set in Makefile to install Lua $R:"
	@echo ""
	@echo "PLAT = $(PLAT)"
	@echo "INSTALL_TOP = $(INSTALL_TOP)"
	@echo "INSTALL_BIN = $(INSTALL_BIN)"
	@echo "INSTALL_INC = $(INSTALL_INC)"
	@echo "INSTALL_LIB = $(INSTALL_LIB)"
	@echo "INSTALL_MAN = $(INSTALL_MAN)"
	@echo "INSTALL_LMOD = $(INSTALL_LMOD)"
	@echo "INSTALL_CMOD = $(INSTALL_CMOD)"
	@echo "INSTALL_EXEC = $(INSTALL_EXEC)"
	@echo "INSTALL_DATA = $(INSTALL_DATA)"
	@echo ""
	@echo "See also src/luaconf.h ."
	@echo ""

# echo private config parameters
pecho:
	@echo "V = $(V)"
	@echo "R = $(R)"
	@echo "TO_BIN = $(TO_BIN)"
	@echo "TO_INC = $(TO_INC)"
	@echo "TO_LIB = $(TO_LIB)"
	@echo "TO_MAN = $(TO_MAN)"

# echo config parameters as Lua code
# uncomment the last sed expression if you want nil instead of empty strings
lecho:
	@echo "-- installation parameters for Lua $R"
	@echo "VERSION = '$V'"
	@echo "RELEASE = '$R'"
	@$(MAKE) echo | grep = | sed -e 's/= /= "/' -e 's/$$/"/' #-e 's/""/nil/'
	@echo "-- EOF"

# list targets that do not create files (but not all makes understand .PHONY)
.PHONY: all $(PLATS) clean test install local none dummy echo pecho lecho

# (end of Makefile)
Commit	Line	Data
21d3294c	1	# makefile for installing Lua
	2	# see INSTALL for installation instructions
	3	# see src/Makefile and src/luaconf.h for further customization
	4
	5	# == CHANGE THE SETTINGS BELOW TO SUIT YOUR ENVIRONMENT =======================
	6
	7	# Your platform. See PLATS for possible values.
	8	PLAT= none
	9
	10	# Where to install. The installation starts in the src and doc directories,
	11	# so take care if INSTALL_TOP is not an absolute path.
	12	INSTALL_TOP= /usr/local
	13	INSTALL_BIN= $(INSTALL_TOP)/bin
	14	INSTALL_INC= $(INSTALL_TOP)/include
	15	INSTALL_LIB= $(INSTALL_TOP)/lib
	16	INSTALL_MAN= $(INSTALL_TOP)/man/man1
	17	#
	18	# You probably want to make INSTALL_LMOD and INSTALL_CMOD consistent with
	19	# LUA_ROOT, LUA_LDIR, and LUA_CDIR in luaconf.h (and also with etc/lua.pc).
	20	INSTALL_LMOD= $(INSTALL_TOP)/share/lua/$V
	21	INSTALL_CMOD= $(INSTALL_TOP)/lib/lua/$V
	22
	23	# How to install. If your install program does not support "-p", then you
	24	# may have to run ranlib on the installed liblua.a (do "make ranlib").
	25	INSTALL= install -p
	26	INSTALL_EXEC= $(INSTALL) -m 0755
	27	INSTALL_DATA= $(INSTALL) -m 0644
	28	#
	29	# If you don't have install you can use cp instead.
	30	# INSTALL= cp -p
	31	# INSTALL_EXEC= $(INSTALL)
	32	# INSTALL_DATA= $(INSTALL)
	33
	34	# Utilities.
	35	MKDIR= mkdir -p
	36	RANLIB= ranlib
	37
	38	# == END OF USER SETTINGS. NO NEED TO CHANGE ANYTHING BELOW THIS LINE =========
	39
	40	# Convenience platforms targets.
	41	PLATS= aix ansi bsd freebsd generic linux macosx mingw posix solaris
	42
	43	# What to install.
	44	TO_BIN= lua luac
	45	TO_INC= lua.h luaconf.h lualib.h lauxlib.h ../etc/lua.hpp
	46	TO_LIB= liblua.a
	47	TO_MAN= lua.1 luac.1
	48
	49	# Lua version and release.
	50	V= 5.1
	51	R= 5.1.4
	52
	53	all: $(PLAT)
	54
	55	$(PLATS) clean:
b28d0461	56	cd src && $(MAKE) $@
21d3294c	57
	58	test: dummy
	59	src/lua test/hello.lua
	60
	61	install: dummy
	62	cd src && $(MKDIR) $(INSTALL_BIN) $(INSTALL_INC) $(INSTALL_LIB) $(INSTALL_MAN) $(INSTALL_LMOD) $(INSTALL_CMOD)
	63	cd src && $(INSTALL_EXEC) $(TO_BIN) $(INSTALL_BIN)
	64	cd src && $(INSTALL_DATA) $(TO_INC) $(INSTALL_INC)
	65	cd src && $(INSTALL_DATA) $(TO_LIB) $(INSTALL_LIB)
	66	cd doc && $(INSTALL_DATA) $(TO_MAN) $(INSTALL_MAN)
	67
	68	ranlib:
	69	cd src && cd $(INSTALL_LIB) && $(RANLIB) $(TO_LIB)
	70
	71	local:
	72	$(MAKE) install INSTALL_TOP=..
	73
	74	none:
	75	@echo "Please do"
	76	@echo " make PLATFORM"
	77	@echo "where PLATFORM is one of these:"
	78	@echo " $(PLATS)"
	79	@echo "See INSTALL for complete instructions."
	80
	81	# make may get confused with test/ and INSTALL in a case-insensitive OS
	82	dummy:
	83
	84	# echo config parameters
	85	echo:
	86	@echo ""
	87	@echo "These are the parameters currently set in src/Makefile to build Lua $R:"
	88	@echo ""
	89	@cd src && $(MAKE) -s echo
	90	@echo ""
	91	@echo "These are the parameters currently set in Makefile to install Lua $R:"
	92	@echo ""
	93	@echo "PLAT = $(PLAT)"
	94	@echo "INSTALL_TOP = $(INSTALL_TOP)"
	95	@echo "INSTALL_BIN = $(INSTALL_BIN)"
	96	@echo "INSTALL_INC = $(INSTALL_INC)"
	97	@echo "INSTALL_LIB = $(INSTALL_LIB)"
	98	@echo "INSTALL_MAN = $(INSTALL_MAN)"
	99	@echo "INSTALL_LMOD = $(INSTALL_LMOD)"
	100	@echo "INSTALL_CMOD = $(INSTALL_CMOD)"
	101	@echo "INSTALL_EXEC = $(INSTALL_EXEC)"
	102	@echo "INSTALL_DATA = $(INSTALL_DATA)"
	103	@echo ""
	104	@echo "See also src/luaconf.h ."
	105	@echo ""
	106
	107	# echo private config parameters
	108	pecho:
	109	@echo "V = $(V)"
	110	@echo "R = $(R)"
	111	@echo "TO_BIN = $(TO_BIN)"
	112	@echo "TO_INC = $(TO_INC)"
	113	@echo "TO_LIB = $(TO_LIB)"
	114	@echo "TO_MAN = $(TO_MAN)"
	115
	116	# echo config parameters as Lua code
	117	# uncomment the last sed expression if you want nil instead of empty strings
	118	lecho:
	119	@echo "-- installation parameters for Lua $R"
	120	@echo "VERSION = '$V'"
121	@echo "RELEASE = '$R'"
122	@$(MAKE) echo \| grep = \| sed -e 's/= /= "/' -e 's/$$/"/' #-e 's/""/nil/'
123	@echo "-- EOF"
124
125	# list targets that do not create files (but not all makes understand .PHONY)
126	.PHONY: all $(PLATS) clean test install local none dummy echo pecho lecho
127
128	# (end of Makefile)