From: Paul Eggert Date: Mon, 12 Aug 2002 14:01:45 +0000 (+0000) Subject: Sync with Automake 1.6.3. X-Git-Tag: BISON-1_49b~48 X-Git-Url: https://git.saurik.com/bison.git/commitdiff_plain/c896cfc95e6fff262745ad0e450c84bfa8d835f0?ds=sidebyside;hp=a447fcd20c419f1d4f6dae9b94ea8c50c0ead282 Sync with Automake 1.6.3. --- diff --git a/config/depcomp b/config/depcomp index 65899658..807b991f 100755 --- a/config/depcomp +++ b/config/depcomp @@ -31,7 +31,16 @@ if test -z "$depmode" || test -z "$source" || test -z "$object"; then fi # `libtool' can also be set to `yes' or `no'. -depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`} +if test -z "$depfile"; then + base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` + dir=`echo "$object" | sed 's,/.*$,/,'` + if test "$dir" = "$object"; then + dir= + fi + # FIXME: should be _deps on DOS. + depfile="$dir.deps/$base" +fi + tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" @@ -198,17 +207,22 @@ aix) ;; tru64) - # The Tru64 AIX compiler uses -MD to generate dependencies as a side + # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - tmpdepfile1="$object.d" - tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` if test "$libtool" = yes; then + tmpdepfile1="$dir.libs/$base.lo.d" + tmpdepfile2="$dir.libs/$base.d" "$@" -Wc,-MD else + tmpdepfile1="$dir$base.o.d" + tmpdepfile2="$dir$base.d" "$@" -MD fi @@ -240,34 +254,40 @@ tru64) dashmstdout) # Important note: in order to support this mode, a compiler *must* - # always write the proprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. - test -z "$dashmflag" && dashmflag=-M - ( IFS=" " - case " $* " in - *" --mode=compile "*) # this is libtool, let us make it quiet - for arg - do # cycle over the arguments - case "$arg" in - "--mode=compile") - # insert --quiet before "--mode=compile" - set fnord "$@" --quiet - shift # fnord - ;; - esac - set fnord "$@" "$arg" - shift # fnord - shift # "$arg" - done + # always write the proprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. We will use -o /dev/null later, + # however we can't do the remplacement now because + # `-o $object' might simply not be used + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg ;; esac - "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" - ) & - proc=$! - "$@" - stat=$? - wait "$proc" - if test "$stat" != 0; then exit $stat; fi + done + + test -z "$dashmflag" && dashmflag=-M + "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' @@ -285,36 +305,31 @@ dashXmstdout) ;; makedepend) + "$@" || exit $? # X makedepend - ( - shift - cleared=no - for arg in "$@"; do - case $cleared in no) - set ""; shift - cleared=yes - esac - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift;; - -*) - ;; - *) - set fnord "$@" "$arg"; shift;; - esac - done - obj_suffix="`echo $object | sed 's/^.*\././'`" - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@" - ) & - proc=$! - "$@" - stat=$? - wait "$proc" - if test "$stat" != 0; then exit $stat; fi + shift + cleared=no + for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + -*) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" - tail +3 "$tmpdepfile" | tr ' ' ' + sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. @@ -324,35 +339,39 @@ makedepend) cpp) # Important note: in order to support this mode, a compiler *must* - # always write the proprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. - ( IFS=" " - case " $* " in - *" --mode=compile "*) - for arg - do # cycle over the arguments - case $arg in - "--mode=compile") - # insert --quiet before "--mode=compile" - set fnord "$@" --quiet - shift # fnord - ;; - esac - set fnord "$@" "$arg" - shift # fnord - shift # "$arg" - done + # always write the proprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg ;; esac - "$@" -E | + done + + "$@" -E | sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" - ) & - proc=$! - "$@" - stat=$? - wait "$proc" - if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" @@ -364,32 +383,25 @@ msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. - ( IFS=" " - case " $* " in - *" --mode=compile "*) - for arg - do # cycle over the arguments - case $arg in - "--mode=compile") - # insert --quiet before "--mode=compile" - set fnord "$@" --quiet - shift # fnord - ;; - esac + "$@" || exit $? + IFS=" " + for arg + do + case "$arg" in + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) set fnord "$@" "$arg" - shift # fnord - shift # "$arg" - done - ;; + shift + shift + ;; esac - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" - ) & - proc=$! - "$@" - stat=$? - wait "$proc" - if test "$stat" != 0; then exit $stat; fi + done + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" diff --git a/config/install-sh b/config/install-sh index e9de2384..11870f1b 100755 --- a/config/install-sh +++ b/config/install-sh @@ -109,7 +109,7 @@ then echo "install: no input file specified" exit 1 else - true + : fi if [ x"$dir_arg" != x ]; then @@ -120,7 +120,7 @@ if [ x"$dir_arg" != x ]; then instcmd=: chmodcmd="" else - instcmd=mkdir + instcmd=$mkdirprog fi else @@ -128,9 +128,9 @@ else # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. - if [ -f $src -o -d $src ] + if [ -f "$src" ] || [ -d "$src" ] then - true + : else echo "install: $src does not exist" exit 1 @@ -141,7 +141,7 @@ else echo "install: no destination specified" exit 1 else - true + : fi # If destination is a directory, append the input filename; if your system @@ -151,7 +151,7 @@ else then dst="$dst"/`basename $src` else - true + : fi fi @@ -163,8 +163,8 @@ dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then -defaultIFS=' -' +defaultIFS=' + ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" @@ -183,7 +183,7 @@ while [ $# -ne 0 ] ; do then $mkdirprog "${pathcomp}" else - true + : fi pathcomp="${pathcomp}/" @@ -194,10 +194,10 @@ if [ x"$dir_arg" != x ] then $doit $instcmd $dst && - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi else # If we're going to rename the final executable, determine the name now. @@ -216,7 +216,7 @@ else then dstfile=`basename $dst` else - true + : fi # Make a temp file name in the proper directory. @@ -235,10 +235,10 @@ else # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi && # Now rename the file to the real destination.