From: Paul Eggert Date: Fri, 8 Oct 2010 18:10:06 +0000 (-0700) Subject: Adjust to recent changes to gnulib bootstrap. X-Git-Tag: v2.5_rc1~61 X-Git-Url: https://git.saurik.com/bison.git/commitdiff_plain/86996fca101c629ef197313a1058df26e01df950 Adjust to recent changes to gnulib bootstrap. * .cvsignore, build-aux/.cvsignore, doc/.cvsignore, etc/.cvsignore: * examples/calc++/.cvsignore, lib/.cvsignore, m4/.cvsignore: * po/.cvsignore, runtime-po/.cvsignore, src/.cvsignore: * tests/.cvsignore: Remove; I don't use CVS to maintain Bison anymore and don't know of anybody else who does. If someone needs these files, they can resurrect them. * .gitignore, build-aux/.gitignore, doc/.gitignore, lib/.gitignore: * m4/.gitignore, po/.gitignore, runtime-po/.gitignore: Omit leading '/', since bootstrap omits it. Adjust file names to match current contents better. * bootstrap: Sync from gnulib: this contains the new gnulib_mk_hook installed just for us. * bootstrap.conf (excluded_files): Don't exclude codeset.m4, glibc21.m4, inttypes_h.m4, size_max.m4, xsize.m4, as they are now needed somehow. Don't have time to look into why. (gnulib_modules): Change malloc to malloc-gnu. Do we really assume the GNU malloc behavior, where malloc (0) != NULL unless we're out of storage? If not, we can omit malloc-gnu; but for now I left it in to be safe. (vc_ignore): Remove. * README-hacking: Renamed from HACKING, since gnulib bootstrap now uses that convention. (cherry picked from commit 95aed8db15a0bb0f7819bf77586d0cf6812ffdfd) Conflicts: bootstrap build-aux/.cvsignore build-aux/.gitignore doc/.cvsignore doc/.gitignore etc/.cvsignore m4/.cvsignore m4/.gitignore src/.cvsignore src/.gitignore tests/.cvsignore --- diff --git a/.cvsignore b/.cvsignore deleted file mode 100644 index 20ef6773..00000000 --- a/.cvsignore +++ /dev/null @@ -1,32 +0,0 @@ -*.cache -*.flc -*.prj -*~ -.tarball-version -.version -ABOUT-NLS -COPYING -GNUmakefile -INSTALL -Makefile -Makefile.in -_* -a.exe -a.out -aclocal.m4 -b.out -bison-* -conf[0-9]* -confdefs* -config.log -config.status -configure -configure.lineno -conftest* -gnulib -javacomp.sh -javaexec.sh -maint.mk -patches -releases -stamp-h* diff --git a/.gitignore b/.gitignore index 185cefcd..95e5d696 100644 --- a/.gitignore +++ b/.gitignore @@ -1,32 +1,32 @@ +.tarball-version +.version /*.cache /*.flc /*.prj /*~ -/.tarball-version -/.version -/ABOUT-NLS -/COPYING -/GNUmakefile -/INSTALL -/Makefile -/Makefile.in /_* -/a.exe -/a.out -/aclocal.m4 -/b.out -/bison-* -/conf[0-9]* -/confdefs* -/config.log -/config.status -/configure -/configure.lineno -/conftest* -/gnulib -/javacomp.sh -/javaexec.sh -/maint.mk -/patches -/releases -/stamp-h* +ABOUT-NLS +COPYING +GNUmakefile +INSTALL +Makefile +Makefile.in +a.exe +a.out +aclocal.m4 +b.out +bison-* +conf[0-9]* +confdefs* +config.log +config.status +configure +configure.lineno +conftest* +gnulib +javacomp.sh +javaexec.sh +maint.mk +patches +releases +stamp-h* diff --git a/ChangeLog b/ChangeLog index f5559768..d7df79fe 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,30 @@ +2010-10-08 Paul Eggert + + Adjust to recent changes to gnulib bootstrap. + + * .cvsignore, build-aux/.cvsignore, doc/.cvsignore, etc/.cvsignore: + * examples/calc++/.cvsignore, lib/.cvsignore, m4/.cvsignore: + * po/.cvsignore, runtime-po/.cvsignore, src/.cvsignore: + * tests/.cvsignore: Remove; I don't use CVS to maintain Bison + anymore and don't know of anybody else who does. If someone needs + these files, they can resurrect them. + * .gitignore, build-aux/.gitignore, doc/.gitignore, lib/.gitignore: + * m4/.gitignore, po/.gitignore, runtime-po/.gitignore: + Omit leading '/', since bootstrap omits it. + Adjust file names to match current contents better. + * bootstrap: Sync from gnulib: this contains the new gnulib_mk_hook + installed just for us. + * bootstrap.conf (excluded_files): Don't exclude codeset.m4, + glibc21.m4, inttypes_h.m4, size_max.m4, xsize.m4, as they are now + needed somehow. Don't have time to look into why. + (gnulib_modules): Change malloc to malloc-gnu. Do we really assume + the GNU malloc behavior, where malloc (0) != NULL unless we're + out of storage? If not, we can omit malloc-gnu; but for now I left + it in to be safe. + (vc_ignore): Remove. + * README-hacking: Renamed from HACKING, since gnulib bootstrap now + uses that convention. + 2010-08-05 Joel E. Denny Version 2.4.3. diff --git a/HACKING b/HACKING deleted file mode 100644 index 759e08c5..00000000 --- a/HACKING +++ /dev/null @@ -1,386 +0,0 @@ --*- outline -*- - -This file attempts to describe the rules to use when hacking Bison. -Don't put this file into the distribution. - -Everything related to the development of Bison is on Savannah: - - http://savannah.gnu.org/projects/bison/ - - -* Administrivia - -** If you incorporate a change from somebody on the net: -First, if it is a large change, you must make sure they have signed -the appropriate paperwork. Second, be sure to add their name and -email address to THANKS. - -** If a change fixes a test, mention the test in the ChangeLog entry. - -** Bug reports -If somebody reports a new bug, mention his name in the ChangeLog entry -and in the test case you write. Put him into THANKS. - -The correct response to most actual bugs is to write a new test case -which demonstrates the bug. Then fix the bug, re-run the test suite, -and check everything in. - -** You may find it useful to install the git-merge-changelog merge driver: - - http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=lib/git-merge-changelog.c - -When following the generic installation instructions there, keep in mind that -your clone of Bison's git repository already contains appropriate -.gitattributes files, and running Bison's bootstrap script will make the -necessary changes to .git/config. - - -* Hacking - -** Visible changes -Which include serious bug fixes, must be mentioned in NEWS. - -** Translations -Only user visible strings are to be translated: error messages, bits -of the .output file etc. This excludes impossible error messages -(comparable to assert/abort), and all the --trace output which is -meant for the maintainers only. - - -* Working from the repository - -These notes intend to help people working on the checked-out sources. -These requirements do not apply when building from a distribution tarball. - -** Requirements - -We've opted to keep only the highest-level sources in the repository. -This eases our maintenance burden, (fewer merges etc.), but imposes more -requirements on anyone wishing to build from the just-checked-out sources. -For example, you have to use the latest stable versions of the maintainer -tools we depend upon, including: - -- Automake -- Autoconf -- Flex -- Gettext -- Gzip -- Perl -- Rsync -- Tar - -Valgrind is also highly recommended, if -Valgrind supports your architecture. - -Bison is written using Bison grammars, so there are bootstrapping -issues. The bootstrap script attempts to discover when the C code -generated from the grammars is out of date, and to bootstrap with an -out-of-date version of the C code, but the process is not foolproof. -Also, you may run into similar problems yourself if you modify Bison. - -Only building the initial full source tree will be a bit painful. -Later, after synchronizing from the repository a plain `make' should -be sufficient. - -** First checkout - -Obviously, if you are reading these notes, you did manage to check out -this package from the repository. For the record, you will find all the -relevant information on: - - http://savannah.gnu.org/git/?group=bison - -Bison uses Git submodules: subscriptions to other Git repositories. -In particular it uses gnulib, the GNU portability library. To ask Git -to perform the first checkout of the submodules, run - - $ git submodule update --init - -Git submodule support is weak before versions 1.6 and later, you -should probably upgrade Git if your version is older. - -The next step is to get other files needed to build, which are -extracted from other source packages: - - $ ./bootstrap - -And there you are! Just - - $ ./configure - $ make - $ make check - -At this point, there should be no difference between your local copy, -and the master copy: - - $ git diff - -should output no difference. - -Enjoy! - -** Updating - -The use of submodules make things somewhat different because git does -not support recursive operations: submodules must be taken care of -explicitly by the user. - -*** Updating Bison - -If you pull a newer version of a branch, say via `git pull', you might -import requests for updated submodules. A simple `git diff' will -reveal if the current version of the submodule (i.e., the actual -contents of the gnulib directory) and the current request from the -subscriber (i.e., the reference of the version of gnulib that the -Bison reporitory requests) differ. To upgrade the submodules (i.e., -to check out the version that is actually requested by the subscriber, -run `git submodule update'. - - $ git pull - $ git submodule update - -*** Updating a submodule -To update a submodule, say gnulib, do as follows: - -Get the most recent version of the master branch from git. - - $ cd gnulib - $ git fetch - $ git checkout -b master --track origin/master - -Make sure Bison can live with that version of gnulib. - - $ cd .. - $ ./bootstrap - $ make distcheck - -Register your changes. - - $ git checkin ... - - -* Test suite - -** make check -Use liberally. - -** Release checks -Try to run the test suite with more severe conditions before a -release: - -- Configure the package with --enable-gcc-warnings, so that one checks - that 1. Bison compiles cleanly, 2. the parsers it produces compile - cleanly too. - -- Build with -DGNULIB_POSIXCHECK. It suggests gnulib modules that can - fix portability issues. - -- run `make maintainer-check' which: - - runs `valgrind -q bison' to run Bison under Valgrind. - - runs the parsers under Valgrind. - - runs the test suite with G++ as C compiler... - -- run `make maintainer-push-check', which runs `make maintainer-check' - while activating the push implementation and its pull interface wrappers - in many test cases that were originally written to exercise only the - pull implementation. This makes certain the push implementation can - perform every task the pull implementation can. - -- run `make maintainer-xml-check', which runs `make maintainer-check' - while checking Bison's XML automaton report for every working grammar - passed to Bison in the test suite. The check just diffs the output of - Bison's included XSLT style sheets with the output of --report=all and - --graph. - -- Change tests/atlocal/CFLAGS to add your preferred options. For - instance, `-traditional' to check that the parsers are K&R. Note - that it does not make sense for glr.c, which should be ANSI, - but currently is actually GNU C, nor for lalr1.cc. - - -* Release Procedure - -** Try to get the *.pot files to the Translation Project at least one -week before a stable release, to give them time to translate them. -Before generating the *.pot files, make sure that po/POTFILES.in and -runtime-po/POTFILES.in list all files with translatable strings. -This helps: grep -l '\<_(' * - -** Tests -See above. - -** Update the foreign files -Running `./bootstrap' in the top level should update them all for you. -This covers PO files too. Sometimes a PO file contains problems that -causes it to be rejected by recent Gettext releases; please report -these to the Translation Project. - -** Update README -Make sure the information in README is current. Most notably, make sure -it recommends a version of GNU M4 that is compatible with the latest -Bison sources. - -** Check copyright years. -We update years in copyright statements throughout Bison once at the -start of every year by running `make update-copyright'. However, before -a release, it's good to verify that it's actually been run. Besides the -copyright statement for each Bison file, check the copyright statements -that the skeletons insert into generated parsers, and check all -occurrences of PACKAGE_COPYRIGHT_YEAR in configure.ac. - -** Update NEWS -The version number, *and* the date of the release (including for -betas). - -** Update ChangeLog -Should have an entry similar to `Version 1.49b.'. - -** Tag the release -Before Bison will build with the right version number, you must tag the release -in git. Do this after all other changes. The command is similar to: - - git tag -a v2.3b - -The log message can be simply: - - Bison 2.3b - -** Push -Once `make distcheck' passes, push your changes and the tag. -`git push' without arguments will not push the tag. - -** make alpha -FIXME: `make alpha' is not maintained and is broken. These -instructions need to be replaced or removed. - -Running `make alpha' is absolutely perfect for beta releases: it makes -the tarballs, the xdeltas, and prepares (in /tmp/) a proto -announcement. It is so neat, that that's what I use anyway for -genuine releases, but adjusting things by hand (e.g., the urls in the -announcement file, the ChangeLog which is not needed etc.). - -If it fails, you're on your own... - -It requires GNU Make. - -** Upload -The generic GNU upload procedure is at: - - http://www.gnu.org/prep/maintain/maintain.html#Automated-FTP-Uploads - -Follow the instructions there to register your information so you're permitted -to upload. Make sure your public key has been uploaded at least to -keys.gnupg.net. You can upload it with: - - gpg --keyserver keys.gnupg.net --send-keys F125BDF3 - -where F125BDF3 should be replaced with your key ID. - -Here's a brief reminder of how to roll the tarballs and upload them: - -*** make distcheck -*** gpg -b bison-2.3b.tar.gz -*** In a file named `bison-2.3b.tar.gz.directive', type: - - version: 1.1 - directory: bison - filename: bison-2.3b.tar.gz - -*** gpg --clearsign bison-2.3b.tar.gz.directive -*** ftp ftp-upload.gnu.org # Log in as anonymous. -*** cd /incoming/alpha # cd /incoming/ftp for full release. -*** put bison-2.3b.tar.gz # This can take a while. -*** put bison-2.3b.tar.gz.sig -*** put bison-2.3b.tar.gz.directive.asc -*** Repeat all these steps for bison-2.3b.tar.bz2. - -** Update Bison manual on www.gnu.org. - -*** You need a non-anonymous checkout of the web pages directory. - - $ cvs -d YOUR_USERID@cvs.savannah.gnu.org:/web/bison checkout bison - -*** Get familiar with the instructions for web page maintainers. -http://www.gnu.org/server/standards/readme_index.html -http://www.gnu.org/server/standards/README.software.html -especially the note about symlinks. - -*** Build the web pages. -Assuming BISON_CHECKOUT refers to a checkout of the Bison dir, and -BISON_WWW_CHECKOUT refers to the web directory created above, do: - - $ cd $BISON_CHECKOUT/doc - $ make stamp-vti - $ ../build-aux/gendocs.sh -o "$BISON_WWW_CHECKOUT/manual" \ - bison "Bison - GNU parser generator" - $ cd $BISON_WWW_CHECKOUT - -Verify that the result looks sane. - -*** Commit the modified and the new files. - -*** Remove old files. -Find the files which have not been overwritten (because they belonged to -sections that have been removed or renamed): - - $ cd manual/html_node - $ ls -lt - -Remove these files and commit their removal to CVS. For each of these -files, add a line to the file .symlinks. This will ensure that -hyperlinks to the removed files will redirect to the entire manual; this -is better than a 404 error. - -There is a problem with 'index.html' being written twice (once for POSIX -function 'index', once for the table of contents); you can ignore this -issue. - -** Announce -To generate a template announcement file: - - make RELEASE_TYPE=alpha gpg_key_ID=F125BDF3 announcement - -where alpha can be replaced by beta or stable and F125BDF3 should be -replaced with your key ID. - -Complete/fix the announcement file. The generated list of recipients -(info-gnu@gnu.org, bug-bison@gnu.org, help-bison@gnu.org, -bison-patches@gnu.org, and coordinator@translationproject.org) is -appropriate for a stable release or a ``serious beta''. For any other -release, drop at least info-gnu@gnu.org. For an example of how to fill -out the rest of the template, search the mailing list archives for the -most recent release announcement. - -For a stable release, send the same announcement on the comp.compilers -newsgroup by sending email to compilers@iecc.com. Do not make any Cc as -the moderator will throw away anything cross-posted or Cc'ed. It really -needs to be a separate message. - -** Bump the version number -In configure.ac. Run `make'. So that developers don't accidentally add new -items to the old NEWS entry, create a new empty NEWS entry something like: - - Changes in version ?.? (????-??-??): - -Push these changes. - - ------ - -Copyright (C) 2002, 2003, 2004, 2005, 2007, 2008, 2009, 2010 Free -Software Foundation, Inc. - -This file is part of GNU Bison. - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 3 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . diff --git a/README-hacking b/README-hacking new file mode 100644 index 00000000..759e08c5 --- /dev/null +++ b/README-hacking @@ -0,0 +1,386 @@ +-*- outline -*- + +This file attempts to describe the rules to use when hacking Bison. +Don't put this file into the distribution. + +Everything related to the development of Bison is on Savannah: + + http://savannah.gnu.org/projects/bison/ + + +* Administrivia + +** If you incorporate a change from somebody on the net: +First, if it is a large change, you must make sure they have signed +the appropriate paperwork. Second, be sure to add their name and +email address to THANKS. + +** If a change fixes a test, mention the test in the ChangeLog entry. + +** Bug reports +If somebody reports a new bug, mention his name in the ChangeLog entry +and in the test case you write. Put him into THANKS. + +The correct response to most actual bugs is to write a new test case +which demonstrates the bug. Then fix the bug, re-run the test suite, +and check everything in. + +** You may find it useful to install the git-merge-changelog merge driver: + + http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=lib/git-merge-changelog.c + +When following the generic installation instructions there, keep in mind that +your clone of Bison's git repository already contains appropriate +.gitattributes files, and running Bison's bootstrap script will make the +necessary changes to .git/config. + + +* Hacking + +** Visible changes +Which include serious bug fixes, must be mentioned in NEWS. + +** Translations +Only user visible strings are to be translated: error messages, bits +of the .output file etc. This excludes impossible error messages +(comparable to assert/abort), and all the --trace output which is +meant for the maintainers only. + + +* Working from the repository + +These notes intend to help people working on the checked-out sources. +These requirements do not apply when building from a distribution tarball. + +** Requirements + +We've opted to keep only the highest-level sources in the repository. +This eases our maintenance burden, (fewer merges etc.), but imposes more +requirements on anyone wishing to build from the just-checked-out sources. +For example, you have to use the latest stable versions of the maintainer +tools we depend upon, including: + +- Automake +- Autoconf +- Flex +- Gettext +- Gzip +- Perl +- Rsync +- Tar + +Valgrind is also highly recommended, if +Valgrind supports your architecture. + +Bison is written using Bison grammars, so there are bootstrapping +issues. The bootstrap script attempts to discover when the C code +generated from the grammars is out of date, and to bootstrap with an +out-of-date version of the C code, but the process is not foolproof. +Also, you may run into similar problems yourself if you modify Bison. + +Only building the initial full source tree will be a bit painful. +Later, after synchronizing from the repository a plain `make' should +be sufficient. + +** First checkout + +Obviously, if you are reading these notes, you did manage to check out +this package from the repository. For the record, you will find all the +relevant information on: + + http://savannah.gnu.org/git/?group=bison + +Bison uses Git submodules: subscriptions to other Git repositories. +In particular it uses gnulib, the GNU portability library. To ask Git +to perform the first checkout of the submodules, run + + $ git submodule update --init + +Git submodule support is weak before versions 1.6 and later, you +should probably upgrade Git if your version is older. + +The next step is to get other files needed to build, which are +extracted from other source packages: + + $ ./bootstrap + +And there you are! Just + + $ ./configure + $ make + $ make check + +At this point, there should be no difference between your local copy, +and the master copy: + + $ git diff + +should output no difference. + +Enjoy! + +** Updating + +The use of submodules make things somewhat different because git does +not support recursive operations: submodules must be taken care of +explicitly by the user. + +*** Updating Bison + +If you pull a newer version of a branch, say via `git pull', you might +import requests for updated submodules. A simple `git diff' will +reveal if the current version of the submodule (i.e., the actual +contents of the gnulib directory) and the current request from the +subscriber (i.e., the reference of the version of gnulib that the +Bison reporitory requests) differ. To upgrade the submodules (i.e., +to check out the version that is actually requested by the subscriber, +run `git submodule update'. + + $ git pull + $ git submodule update + +*** Updating a submodule +To update a submodule, say gnulib, do as follows: + +Get the most recent version of the master branch from git. + + $ cd gnulib + $ git fetch + $ git checkout -b master --track origin/master + +Make sure Bison can live with that version of gnulib. + + $ cd .. + $ ./bootstrap + $ make distcheck + +Register your changes. + + $ git checkin ... + + +* Test suite + +** make check +Use liberally. + +** Release checks +Try to run the test suite with more severe conditions before a +release: + +- Configure the package with --enable-gcc-warnings, so that one checks + that 1. Bison compiles cleanly, 2. the parsers it produces compile + cleanly too. + +- Build with -DGNULIB_POSIXCHECK. It suggests gnulib modules that can + fix portability issues. + +- run `make maintainer-check' which: + - runs `valgrind -q bison' to run Bison under Valgrind. + - runs the parsers under Valgrind. + - runs the test suite with G++ as C compiler... + +- run `make maintainer-push-check', which runs `make maintainer-check' + while activating the push implementation and its pull interface wrappers + in many test cases that were originally written to exercise only the + pull implementation. This makes certain the push implementation can + perform every task the pull implementation can. + +- run `make maintainer-xml-check', which runs `make maintainer-check' + while checking Bison's XML automaton report for every working grammar + passed to Bison in the test suite. The check just diffs the output of + Bison's included XSLT style sheets with the output of --report=all and + --graph. + +- Change tests/atlocal/CFLAGS to add your preferred options. For + instance, `-traditional' to check that the parsers are K&R. Note + that it does not make sense for glr.c, which should be ANSI, + but currently is actually GNU C, nor for lalr1.cc. + + +* Release Procedure + +** Try to get the *.pot files to the Translation Project at least one +week before a stable release, to give them time to translate them. +Before generating the *.pot files, make sure that po/POTFILES.in and +runtime-po/POTFILES.in list all files with translatable strings. +This helps: grep -l '\<_(' * + +** Tests +See above. + +** Update the foreign files +Running `./bootstrap' in the top level should update them all for you. +This covers PO files too. Sometimes a PO file contains problems that +causes it to be rejected by recent Gettext releases; please report +these to the Translation Project. + +** Update README +Make sure the information in README is current. Most notably, make sure +it recommends a version of GNU M4 that is compatible with the latest +Bison sources. + +** Check copyright years. +We update years in copyright statements throughout Bison once at the +start of every year by running `make update-copyright'. However, before +a release, it's good to verify that it's actually been run. Besides the +copyright statement for each Bison file, check the copyright statements +that the skeletons insert into generated parsers, and check all +occurrences of PACKAGE_COPYRIGHT_YEAR in configure.ac. + +** Update NEWS +The version number, *and* the date of the release (including for +betas). + +** Update ChangeLog +Should have an entry similar to `Version 1.49b.'. + +** Tag the release +Before Bison will build with the right version number, you must tag the release +in git. Do this after all other changes. The command is similar to: + + git tag -a v2.3b + +The log message can be simply: + + Bison 2.3b + +** Push +Once `make distcheck' passes, push your changes and the tag. +`git push' without arguments will not push the tag. + +** make alpha +FIXME: `make alpha' is not maintained and is broken. These +instructions need to be replaced or removed. + +Running `make alpha' is absolutely perfect for beta releases: it makes +the tarballs, the xdeltas, and prepares (in /tmp/) a proto +announcement. It is so neat, that that's what I use anyway for +genuine releases, but adjusting things by hand (e.g., the urls in the +announcement file, the ChangeLog which is not needed etc.). + +If it fails, you're on your own... + +It requires GNU Make. + +** Upload +The generic GNU upload procedure is at: + + http://www.gnu.org/prep/maintain/maintain.html#Automated-FTP-Uploads + +Follow the instructions there to register your information so you're permitted +to upload. Make sure your public key has been uploaded at least to +keys.gnupg.net. You can upload it with: + + gpg --keyserver keys.gnupg.net --send-keys F125BDF3 + +where F125BDF3 should be replaced with your key ID. + +Here's a brief reminder of how to roll the tarballs and upload them: + +*** make distcheck +*** gpg -b bison-2.3b.tar.gz +*** In a file named `bison-2.3b.tar.gz.directive', type: + + version: 1.1 + directory: bison + filename: bison-2.3b.tar.gz + +*** gpg --clearsign bison-2.3b.tar.gz.directive +*** ftp ftp-upload.gnu.org # Log in as anonymous. +*** cd /incoming/alpha # cd /incoming/ftp for full release. +*** put bison-2.3b.tar.gz # This can take a while. +*** put bison-2.3b.tar.gz.sig +*** put bison-2.3b.tar.gz.directive.asc +*** Repeat all these steps for bison-2.3b.tar.bz2. + +** Update Bison manual on www.gnu.org. + +*** You need a non-anonymous checkout of the web pages directory. + + $ cvs -d YOUR_USERID@cvs.savannah.gnu.org:/web/bison checkout bison + +*** Get familiar with the instructions for web page maintainers. +http://www.gnu.org/server/standards/readme_index.html +http://www.gnu.org/server/standards/README.software.html +especially the note about symlinks. + +*** Build the web pages. +Assuming BISON_CHECKOUT refers to a checkout of the Bison dir, and +BISON_WWW_CHECKOUT refers to the web directory created above, do: + + $ cd $BISON_CHECKOUT/doc + $ make stamp-vti + $ ../build-aux/gendocs.sh -o "$BISON_WWW_CHECKOUT/manual" \ + bison "Bison - GNU parser generator" + $ cd $BISON_WWW_CHECKOUT + +Verify that the result looks sane. + +*** Commit the modified and the new files. + +*** Remove old files. +Find the files which have not been overwritten (because they belonged to +sections that have been removed or renamed): + + $ cd manual/html_node + $ ls -lt + +Remove these files and commit their removal to CVS. For each of these +files, add a line to the file .symlinks. This will ensure that +hyperlinks to the removed files will redirect to the entire manual; this +is better than a 404 error. + +There is a problem with 'index.html' being written twice (once for POSIX +function 'index', once for the table of contents); you can ignore this +issue. + +** Announce +To generate a template announcement file: + + make RELEASE_TYPE=alpha gpg_key_ID=F125BDF3 announcement + +where alpha can be replaced by beta or stable and F125BDF3 should be +replaced with your key ID. + +Complete/fix the announcement file. The generated list of recipients +(info-gnu@gnu.org, bug-bison@gnu.org, help-bison@gnu.org, +bison-patches@gnu.org, and coordinator@translationproject.org) is +appropriate for a stable release or a ``serious beta''. For any other +release, drop at least info-gnu@gnu.org. For an example of how to fill +out the rest of the template, search the mailing list archives for the +most recent release announcement. + +For a stable release, send the same announcement on the comp.compilers +newsgroup by sending email to compilers@iecc.com. Do not make any Cc as +the moderator will throw away anything cross-posted or Cc'ed. It really +needs to be a separate message. + +** Bump the version number +In configure.ac. Run `make'. So that developers don't accidentally add new +items to the old NEWS entry, create a new empty NEWS entry something like: + + Changes in version ?.? (????-??-??): + +Push these changes. + + +----- + +Copyright (C) 2002, 2003, 2004, 2005, 2007, 2008, 2009, 2010 Free +Software Foundation, Inc. + +This file is part of GNU Bison. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . diff --git a/bootstrap b/bootstrap index 12e1319c..2b3f24b3 100755 --- a/bootstrap +++ b/bootstrap @@ -1,9 +1,10 @@ #! /bin/sh +# Print a version string. +scriptversion=2010-10-08.16; # UTC # Bootstrap this package from checked-out sources. -# Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free -# Software Foundation, Inc. +# Copyright (C) 2003-2010 Free Software Foundation, Inc. # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -18,13 +19,20 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . -# Written by Paul Eggert. +# Originally written by Paul Eggert. The canonical version of this +# script is maintained as build-aux/bootstrap in gnulib, however, to +# be useful to your project, you should place a copy of it under +# version control in the top-level directory of your project. The +# intent is that all customization can be done with a bootstrap.conf +# file also maintained in your version control; gnulib comes with a +# template build-aux/bootstrap.conf to get you started. + +# Please report bugs or propose patches to bug-gnulib@gnu.org. nl=' ' # Ensure file names are sorted consistently across platforms. -# Also, ensure diagnostics are in English, e.g., "wget --help" below. LC_ALL=C export LC_ALL @@ -45,7 +53,7 @@ Options: sources reside. Use this if you already have gnulib sources on your machine, and do not want to waste your bandwidth downloading - them again. + them again. Defaults to \$GNULIB_SRCDIR. --copy Copy files instead of creating symbolic links. --force Attempt to bootstrap even if the sources seem not to have been checked out. @@ -72,6 +80,10 @@ gnulib_modules= # Any gnulib files needed that are not in modules. gnulib_files= +# A function to be called to edit gnulib.mk right after it's created. +# Override it via your own definition in bootstrap.conf. +gnulib_mk_hook() { :; } + # A function to be called after everything else in this script. # Override it via your own definition in bootstrap.conf. bootstrap_epilogue() { :; } @@ -82,7 +94,8 @@ bootstrap_epilogue() { :; } # options because the latest/%s directory and the .po files within are # all symlinks. po_download_command_format=\ -"rsync -Lrtvz 'translationproject.org::tp/latest/%s/' '%s'" +"rsync --delete --exclude '*.s1' -Lrtvz \ + 'translationproject.org::tp/latest/%s/' '%s'" extract_package_name=' /^AC_INIT(/{ @@ -135,7 +148,8 @@ XGETTEXT_OPTIONS='\\\ --flag=error:3:c-format --flag=error_at_line:5:c-format\\\ ' -# Package bug report address for gettext files +# Package bug report address and copyright holder for gettext files +COPYRIGHT_HOLDER='Free Software Foundation, Inc.' MSGID_BUGS_ADDRESS=bug-$package@gnu.org # Files we don't want to import. @@ -143,7 +157,7 @@ excluded_files= # File that should exist in the top directory of a checked out hierarchy, # but not in a distribution tarball. -checkout_only_file=HACKING +checkout_only_file=README-hacking # Whether to use copies instead of symlinks. copy=false @@ -162,7 +176,6 @@ vc_ignore=auto # die otherwise. find_tool () { - # Find sha1sum, named gsha1sum on MacPorts. find_tool_envvar=$1 shift find_tool_names=$@ @@ -190,8 +203,8 @@ find_tool () eval "export $find_tool_envvar" } -# Find sha1sum, named gsha1sum on MacPorts. -find_tool SHA1SUM sha1sum gsha1sum +# Find sha1sum, named gsha1sum on MacPorts, and shasum on MacOS 10.6. +find_tool SHA1SUM sha1sum gsha1sum shasum # Override the default configuration, if necessary. # Make sure that bootstrap.conf is sourced from the current directory @@ -248,21 +261,6 @@ insert_sorted_if_absent() { || exit 1 } -# Adjust $PATTERN for $VC_IGNORE_FILE and insert it with -# insert_sorted_if_absent. -insert_vc_ignore() { - vc_ignore_file="$1" - case $vc_ignore_file in - *.gitignore) - # A .gitignore entry that does not start with `/' applies recursively to - # subdirectories, so prepend `/' to every .gitignore entry. - pattern=`echo "$2" | sed s,^,/,`;; - *) - pattern="$2";; - esac - insert_sorted_if_absent "$vc_ignore_file" "$pattern" -} - # Die if there is no AC_CONFIG_AUX_DIR($build_aux) line in configure.ac. found_aux_dir=no grep '^[ ]*AC_CONFIG_AUX_DIR(\['"$build_aux"'\])' configure.ac \ @@ -281,7 +279,7 @@ if test ! -d $build_aux; then mkdir $build_aux for dot_ig in x $vc_ignore; do test $dot_ig = x && continue - insert_vc_ignore $dot_ig $build_aux + insert_sorted_if_absent $dot_ig $build_aux done fi @@ -352,8 +350,12 @@ check_versions() { ret=0 while read app req_ver; do + # We only need libtoolize from the libtool package. + if test "$app" = libtool; then + app=libtoolize + fi # Honor $APP variables ($TAR, $AUTOCONF, etc.) - appvar=`echo $app | tr '[a-z]' '[A-Z]'` + appvar=`echo $app | tr '[a-z]-' '[A-Z]_'` test "$appvar" = TAR && appvar=AMTAR eval "app=\${$appvar-$app}" inst_ver=$(get_version $app) @@ -376,16 +378,30 @@ check_versions() { print_versions() { echo "Program Min_version" echo "----------------------" - printf "$buildreq" + printf %s "$buildreq" echo "----------------------" # can't depend on column -t } +use_libtool=0 +# We'd like to use grep -E, to see if any of LT_INIT, +# AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac, +# but that's not portable enough (e.g., for Solaris). +grep '^[ ]*A[CM]_PROG_LIBTOOL' configure.ac >/dev/null \ + && use_libtool=1 +grep '^[ ]*LT_INIT' configure.ac >/dev/null \ + && use_libtool=1 +if test $use_libtool = 1; then + find_tool LIBTOOLIZE glibtoolize libtoolize +fi + if ! printf "$buildreq" | check_versions; then - test -f README-prereq && - echo "See README-prereq for notes on obtaining these prerequisite programs:" >&2 - echo - print_versions + echo >&2 + if test -f README-prereq; then + echo "See README-prereq for how to get the prerequisite programs" >&2 + else + echo "Please install the prerequisite programs" >&2 + fi exit 1 fi @@ -407,7 +423,7 @@ fi cleanup_gnulib() { status=$? - rm -fr gnulib + rm -fr "$gnulib_path" exit $status } @@ -415,6 +431,9 @@ git_modules_config () { test -f .gitmodules && git config --file .gitmodules "$@" } +gnulib_path=`git_modules_config submodule.gnulib.path` +: ${gnulib_path=gnulib} + # Get gnulib files. case ${GNULIB_SRCDIR--} in @@ -424,30 +443,44 @@ case ${GNULIB_SRCDIR--} in git submodule init || exit $? git submodule update || exit $? - elif [ ! -d gnulib ]; then + elif [ ! -d "$gnulib_path" ]; then echo "$0: getting gnulib files..." trap cleanup_gnulib 1 2 13 15 - git clone --help|grep depth > /dev/null && shallow='--depth 2' || shallow= - git clone $shallow git://git.sv.gnu.org/gnulib || + shallow= + git clone -h 2>&1 | grep -- --depth > /dev/null && shallow='--depth 2' + git clone $shallow git://git.sv.gnu.org/gnulib "$gnulib_path" || cleanup_gnulib trap - 1 2 13 15 fi - GNULIB_SRCDIR=gnulib + GNULIB_SRCDIR=$gnulib_path ;; *) - # Redirect the gnulib submodule to the directory on the command line - # if possible. + # Use GNULIB_SRCDIR as a reference. if test -d "$GNULIB_SRCDIR"/.git && \ git_modules_config submodule.gnulib.url >/dev/null; then - git submodule init - GNULIB_SRCDIR=`cd $GNULIB_SRCDIR && pwd` - git_modules_config --replace-all submodule.gnulib.url $GNULIB_SRCDIR echo "$0: getting gnulib files..." - git submodule update || exit $? - GNULIB_SRCDIR=gnulib + if git submodule -h|grep -- --reference > /dev/null; then + # Prefer the one-liner available in git 1.6.4 or newer. + git submodule update --init --reference "$GNULIB_SRCDIR" \ + "$gnulib_path" || exit $? + else + # This fallback allows at least git 1.5.5. + if test -f "$gnulib_path"/gnulib-tool; then + # Since file already exists, assume submodule init already complete. + git submodule update || exit $? + else + # Older git can't clone into an empty directory. + rmdir "$gnulib_path" 2>/dev/null + git clone --reference "$GNULIB_SRCDIR" \ + "$(git_modules_config submodule.gnulib.url)" "$gnulib_path" \ + && git submodule init && git submodule update \ + || exit $? + fi + fi + GNULIB_SRCDIR=$gnulib_path fi ;; esac @@ -465,22 +498,24 @@ download_po_files() { eval "$cmd" } -# Download .po files to $po_dir/.reference and copy only the new +# Mirror .po files to $po_dir/.reference and copy only the new # or modified ones into $po_dir. Also update $po_dir/LINGUAS. +# Note po files that exist locally only are left in $po_dir but will +# not be included in LINGUAS and hence will not be distributed. update_po_files() { # Directory containing primary .po files. # Overwrite them only when we're sure a .po file is new. po_dir=$1 domain=$2 - # Download *.po files into this dir. + # Mirror *.po files into this dir. # Usually contains *.s1 checksum files. ref_po_dir="$po_dir/.reference" test -d $ref_po_dir || mkdir $ref_po_dir || return download_po_files $ref_po_dir $domain \ && ls "$ref_po_dir"/*.po 2>/dev/null | - sed 's|.*/||; s|\.po$||' > "$po_dir/LINGUAS" + sed 's|.*/||; s|\.po$||' > "$po_dir/LINGUAS" || return langs=`cd $ref_po_dir && echo *.po|sed 's/\.po//g'` test "$langs" = '*' && langs=x @@ -510,27 +545,6 @@ case $SKIP_PO in fi;; esac -check_dst_dir() -{ - dst=$1 - # If the destination directory doesn't exist, create it. - # This is required at least for "lib/uniwidth/cjk.h". - dst_dir=`dirname "$dst"` - if ! test -d "$dst_dir"; then - mkdir -p "$dst_dir" - - # If we've just created a directory like lib/uniwidth, - # tell version control system(s) it's ignorable. - # FIXME: for now, this does only one level - parent=`dirname "$dst_dir"` - for dot_ig in x $vc_ignore; do - test $dot_ig = x && continue - ig=$parent/$dot_ig - insert_vc_ignore $ig `echo "$dst_dir"|sed 's,.*/,,'` - done - fi -} - symlink_to_dir() { src=$1/$2 @@ -538,7 +552,22 @@ symlink_to_dir() test -f "$src" && { - check_dst_dir "$dst" + # If the destination directory doesn't exist, create it. + # This is required at least for "lib/uniwidth/cjk.h". + dst_dir=`dirname "$dst"` + if ! test -d "$dst_dir"; then + mkdir -p "$dst_dir" + + # If we've just created a directory like lib/uniwidth, + # tell version control system(s) it's ignorable. + # FIXME: for now, this does only one level + parent=`dirname "$dst_dir"` + for dot_ig in x $vc_ignore; do + test $dot_ig = x && continue + ig=$parent/$dot_ig + insert_sorted_if_absent $ig `echo "$dst_dir"|sed 's,.*/,,'` + done + fi if $copy; then { @@ -595,6 +624,11 @@ cp_mark_as_generated() *) c1= ; c2= ;; esac + # If the destination directory doesn't exist, create it. + # This is required at least for "lib/uniwidth/cjk.h". + dst_dir=`dirname "$cp_dst"` + test -d "$dst_dir" || mkdir -p "$dst_dir" + if test -z "$c1"; then cmp -s "$cp_src" "$cp_dst" || { # Copy the file first to get proper permissions if it @@ -606,7 +640,6 @@ cp_mark_as_generated() mv -f "$cp_dst-t" "$cp_dst" } else - check_dst_dir "$cp_dst" # Copy the file first to get proper permissions if it # doesn't already exist. Then overwrite the copy. cp "$cp_src" "$cp_dst-t" && @@ -649,19 +682,22 @@ slurp() { for file in `ls -a $1/$dir`; do case $file in .|..) continue;; - .*) continue;; # FIXME: should all file names starting with "." be ignored? + # FIXME: should all file names starting with "." be ignored? + .*) continue;; esac test -d $1/$dir/$file && continue for excluded_file in $excluded_files; do test "$dir/$file" = "$excluded_file" && continue 2 done - if test $file = Makefile.am; then + if test $file = Makefile.am && test "X$gnulib_mk" != XMakefile.am; then copied=$copied${sep}$gnulib_mk; sep=$nl remove_intl='/^[^#].*\/intl/s/^/#/;'"s!$bt_regex/!!g" - sed "$remove_intl" $1/$dir/$file | cmp - $dir/$gnulib_mk > /dev/null || { + sed "$remove_intl" $1/$dir/$file | + cmp - $dir/$gnulib_mk > /dev/null || { echo "$0: Copying $1/$dir/$file to $dir/$gnulib_mk ..." && rm -f $dir/$gnulib_mk && - sed "$remove_intl" $1/$dir/$file >$dir/$gnulib_mk + sed "$remove_intl" $1/$dir/$file >$dir/$gnulib_mk && + gnulib_mk_hook $dir/$gnulib_mk } elif { test "${2+set}" = set && test -r $2/$dir/$file; } || version_controlled_file $dir $file; then @@ -673,7 +709,7 @@ slurp() { rm -f $dir/$file sed ' /^AC_DEFUN(\[AM_INTL_SUBDIR],/,/^]/c\ - AC_DEFUN([AM_INTL_SUBDIR], [ + AC_DEFUN([AM_INTL_SUBDIR], []) /^AC_DEFUN(\[gt_INTL_SUBDIR_CORE],/,/^]/c\ AC_DEFUN([gt_INTL_SUBDIR_CORE], []) $a\ @@ -689,18 +725,25 @@ slurp() { test $dot_ig = x && continue ig=$dir/$dot_ig if test -n "$copied"; then - insert_vc_ignore $ig "$copied" + insert_sorted_if_absent $ig "$copied" # If an ignored file name ends with .in.h, then also add # the name with just ".h". Many gnulib headers are generated, # e.g., stdint.in.h -> stdint.h, dirent.in.h ->..., etc. # Likewise for .gperf -> .h, .y -> .c, and .sin -> .sed - f=`echo "$copied"|sed 's/\.in\.h$/.h/;s/\.sin$/.sed/;s/\.y$/.c/;s/\.gperf$/.h/'` - insert_vc_ignore $ig "$f" + f=`echo "$copied" | + sed ' + s/\.in\.h$/.h/ + s/\.sin$/.sed/ + s/\.y$/.c/ + s/\.gperf$/.h/ + ' + ` + insert_sorted_if_absent $ig "$f" # For files like sys_stat.in.h and sys_time.in.h, record as # ignorable the directory we might eventually create: sys/. f=`echo "$copied"|sed 's/sys_.*\.in\.h$/sys/'` - insert_vc_ignore $ig "$f" + insert_sorted_if_absent $ig "$f" fi done done @@ -725,6 +768,12 @@ gnulib_tool_options="\ --local-dir $local_gl_dir\ $gnulib_tool_option_extras\ " +if test $use_libtool = 1; then + case "$gnulib_tool_options " in + *' --libtool '*) ;; + *) gnulib_tool_options="$gnulib_tool_options --libtool" ;; + esac +fi echo "$0: $gnulib_tool $gnulib_tool_options --import ..." $gnulib_tool $gnulib_tool_options --import $gnulib_modules && slurp $bt || exit @@ -767,20 +816,12 @@ grep -E '^[ ]*AC_CONFIG_HEADERS?\>' configure.ac >/dev/null || for command in \ libtool \ - "${ACLOCAL-aclocal} --force -I m4" \ + "${ACLOCAL-aclocal} --force -I m4 $ACLOCAL_FLAGS" \ "${AUTOCONF-autoconf} --force" \ "${AUTOHEADER-autoheader} --force" \ "${AUTOMAKE-automake} --add-missing --copy --force-missing" do if test "$command" = libtool; then - use_libtool=0 - # We'd like to use grep -E, to see if any of LT_INIT, - # AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac, - # but that's not portable enough (e.g., for Solaris). - grep '^[ ]*A[CM]_PROG_LIBTOOL' configure.ac >/dev/null \ - && use_libtool=1 - grep '^[ ]*LT_INIT' configure.ac >/dev/null \ - && use_libtool=1 test $use_libtool = 0 \ && continue command="${LIBTOOLIZE-libtoolize} -c -f" @@ -806,13 +847,14 @@ if test $with_gettext = yes; then rm -f po/Makevars sed ' /^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/ - /^MSGID_BUGS_ADDRESS *=/s/=.*/= '"$MSGID_BUGS_ADDRESS"'/ + /^COPYRIGHT_HOLDER *=/s/=.*/= '"$COPYRIGHT_HOLDER"'/ + /^MSGID_BUGS_ADDRESS *=/s|=.*|= '"$MSGID_BUGS_ADDRESS"'| /^XGETTEXT_OPTIONS *=/{ s/$/ \\/ a\ '"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+} } - ' po/Makevars.template >po/Makevars + ' po/Makevars.template >po/Makevars || exit 1 if test -d runtime-po; then # Similarly for runtime-po/Makevars, but not quite the same. @@ -826,7 +868,7 @@ if test $with_gettext = yes; then a\ '"$XGETTEXT_OPTIONS_RUNTIME"' $${end_of_xgettext_options+} } - ' runtime-po/Makevars + ' po/Makevars.template >runtime-po/Makevars || exit 1 # Copy identical files from po to runtime-po. (cd po && cp -p Makefile.in.in *-quot *.header *.sed *.sin ../runtime-po) @@ -837,6 +879,10 @@ bootstrap_epilogue echo "$0: done. Now you can run './configure'." -# Local Variables: -# indent-tabs-mode: nil +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: diff --git a/bootstrap.conf b/bootstrap.conf index 4d9aaf8f..e19bb721 100644 --- a/bootstrap.conf +++ b/bootstrap.conf @@ -20,7 +20,7 @@ gnulib_modules=' announce-gen argmatch assert config-h c-strcase configmake dirname error extensions fopen-safer gendocs getopt-gnu gettext git-version-gen hash inttypes javacomp-script javaexec-script - maintainer-makefile malloc mbswidth obstack pipe quote quotearg + maintainer-makefile malloc-gnu mbswidth obstack pipe quote quotearg realloc-posix stdbool stpcpy strerror strtoul strverscmp unistd unistd-safer unlocked-io update-copyright unsetenv verify warnings xalloc xalloc-die xstrndup @@ -45,29 +45,20 @@ XGETTEXT_OPTIONS_RUNTIME=$XGETTEXT_OPTIONS'\\\ # Gettext supplies these files, but we don't need them since # we don't have an intl subdirectory. excluded_files=' - m4/codeset.m4 m4/glibc2.m4 - m4/glibc21.m4 m4/intdiv0.m4 m4/intl.m4 m4/intldir.m4 m4/intmax.m4 - m4/inttypes_h.m4 m4/lcmessage.m4 m4/lock.m4 m4/longdouble.m4 m4/signed.m4 - m4/size_max.m4 m4/uintmax_t.m4 m4/ulonglong.m4 m4/visibility.m4 - m4/xsize.m4 ' -# In directories like lib/, m4/, and po/, generate both these files because we -# still try to support CVS emulation. -vc_ignore='.cvsignore .gitignore' - bootstrap_epilogue() { # Make sure we don't need src/bison, which usually doesn't exist at diff --git a/build-aux/.cvsignore b/build-aux/.cvsignore deleted file mode 100644 index 1c89631e..00000000 --- a/build-aux/.cvsignore +++ /dev/null @@ -1,24 +0,0 @@ -Makefile -Makefile.in -announce-gen -arg-nonnull.h -c++defs.h -compile -config.guess -config.rpath -config.sub -depcomp -gendocs.sh -git-version-gen -install-sh -javacomp.sh.in -javaexec.sh.in -link-warning.h -mdate-sh -missing -texinfo.tex -update-copyright -useless-if-before-free -vc-list-files -warn-on-use.h -ylwrap diff --git a/build-aux/.gitignore b/build-aux/.gitignore index eb4e6bf8..1c89631e 100644 --- a/build-aux/.gitignore +++ b/build-aux/.gitignore @@ -1,24 +1,24 @@ -/Makefile -/Makefile.in -/announce-gen -/arg-nonnull.h -/c++defs.h -/compile -/config.guess -/config.rpath -/config.sub -/depcomp -/gendocs.sh -/git-version-gen -/install-sh -/javacomp.sh.in -/javaexec.sh.in -/link-warning.h -/mdate-sh -/missing -/texinfo.tex -/update-copyright -/useless-if-before-free -/vc-list-files -/warn-on-use.h -/ylwrap +Makefile +Makefile.in +announce-gen +arg-nonnull.h +c++defs.h +compile +config.guess +config.rpath +config.sub +depcomp +gendocs.sh +git-version-gen +install-sh +javacomp.sh.in +javaexec.sh.in +link-warning.h +mdate-sh +missing +texinfo.tex +update-copyright +useless-if-before-free +vc-list-files +warn-on-use.h +ylwrap diff --git a/doc/.cvsignore b/doc/.cvsignore deleted file mode 100644 index 28087990..00000000 --- a/doc/.cvsignore +++ /dev/null @@ -1,26 +0,0 @@ -*.info* -Makefile -Makefile.in -bison.1 -bison.aux -bison.cp -bison.cps -bison.dvi -bison.fn -bison.html -bison.ky -bison.log -bison.pdf -bison.pg -bison.ps -bison.toc -bison.tp -bison.vr -cross-options.texi -gendocs_template -refcard.dvi -refcard.log -refcard.ps -stamp-vti -version.texi -yacc.1 diff --git a/doc/.gitignore b/doc/.gitignore index 341c2b19..2e7b3dfb 100644 --- a/doc/.gitignore +++ b/doc/.gitignore @@ -1,26 +1,28 @@ -/*.info* -/Makefile -/Makefile.in -/bison.1 -/bison.aux -/bison.cp -/bison.cps -/bison.dvi -/bison.fn -/bison.html -/bison.ky -/bison.log -/bison.pdf -/bison.pg -/bison.ps -/bison.toc -/bison.tp -/bison.vr -/cross-options.texi -/gendocs_template -/refcard.dvi -/refcard.log -/refcard.ps -/stamp-vti -/version.texi -/yacc.1 +*.info* +*~ +.dirstamp +Makefile +Makefile.in +bison.1 +bison.aux +bison.cp +bison.cps +bison.dvi +bison.fn +bison.html +bison.ky +bison.log +bison.pdf +bison.pg +bison.ps +bison.toc +bison.tp +bison.vr +cross-options.texi +gendocs_template +refcard.dvi +refcard.log +refcard.ps +stamp-vti +version.texi +yacc.1 diff --git a/etc/.cvsignore b/etc/.cvsignore deleted file mode 100644 index c5858faf..00000000 --- a/etc/.cvsignore +++ /dev/null @@ -1,3 +0,0 @@ -Makefile -Makefile.in -bench.pl diff --git a/examples/calc++/.cvsignore b/examples/calc++/.cvsignore deleted file mode 100644 index cacb7664..00000000 --- a/examples/calc++/.cvsignore +++ /dev/null @@ -1,11 +0,0 @@ -*.cc -*.hh -*.ll -*.output -*.stamp -*.tmp -*.yy -.deps -Makefile -Makefile.in -calc++ diff --git a/lib/.cvsignore b/lib/.cvsignore deleted file mode 100644 index 9997462d..00000000 --- a/lib/.cvsignore +++ /dev/null @@ -1,219 +0,0 @@ -.deps -Makefile -Makefile.in -alloca.h -alloca.in.h -argmatch.c -argmatch.h -asnprintf.c -basename-lgpl.c -basename.c -binary-io.h -bitrotate.h -c-ctype.c -c-ctype.h -c-strcase.h -c-strcasecmp.c -c-strncasecmp.c -charset.alias -cloexec.c -cloexec.h -config.charset -config.h -config.hin -configmake.h -dirname-lgpl.c -dirname.c -dirname.h -dup-safer-flag.c -dup-safer.c -dup2.c -errno.h -errno.in.h -error.c -error.h -exitfail.c -exitfail.h -fatal-signal.c -fatal-signal.h -fcntl.c -fcntl.h -fcntl.in.h -fd-safer-flag.c -fd-safer.c -float+.h -float.h -float.in.h -fopen-safer.c -fopen.c -fprintf.c -fpucw.h -frexp.c -frexpl.c -fseterr.c -fseterr.h -getdtablesize.c -getopt.c -getopt.h -getopt.in.h -getopt1.c -getopt_.h -getopt_int.h -getpagesize.c -gettext.h -gnulib.mk -hash.c -hash.h -intprops.h -inttypes.h -inttypes.in.h -inttypes_.h -isnan.c -isnand-nolibm.h -isnand.c -isnanf-nolibm.h -isnanf.c -isnanl-nolibm.h -isnanl.c -localcharset.c -localcharset.h -malloc.c -math.h -math.in.h -mbrtowc.c -mbsinit.c -mbswidth.c -mbswidth.h -memchr.c -memchr.valgrind -obstack.c -obstack.h -open.c -pipe-safer.c -pipe.c -pipe.h -pipe2-safer.c -pipe2.c -printf-args.c -printf-args.h -printf-frexp.c -printf-frexp.h -printf-frexpl.c -printf-frexpl.h -printf-parse.c -printf-parse.h -printf.c -quote.c -quote.h -quotearg.c -quotearg.h -rawmemchr.c -rawmemchr.valgrind -realloc.c -ref-add.sed -ref-add.sin -ref-del.sed -ref-del.sin -sched.h -sched.in.h -sig-handler.h -sigaction.c -signal.h -signal.in.h -signbitd.c -signbitf.c -signbitl.c -sigprocmask.c -size_max.h -snprintf.c -spawn.h -spawn.in.h -spawn_faction_addclose.c -spawn_faction_adddup2.c -spawn_faction_addopen.c -spawn_faction_destroy.c -spawn_faction_init.c -spawn_int.h -spawnattr_destroy.c -spawnattr_init.c -spawnattr_setflags.c -spawnattr_setsigmask.c -spawni.c -spawnp.c -sprintf.c -stamp-h1 -stat.c -stdbool.h -stdbool.in.h -stdbool_.h -stddef.h -stddef.in.h -stdint.h -stdint.in.h -stdint_.h -stdio--.h -stdio-impl.h -stdio-safer.h -stdio-write.c -stdio.h -stdio.in.h -stdlib.h -stdlib.in.h -stdlib_.h -stpcpy.c -strchrnul.c -strchrnul.valgrind -streq.h -strerror.c -string.h -string.in.h -string_.h -stripslash.c -strndup.c -strnlen.c -strtol.c -strtoul.c -strverscmp.c -strverscmp.h -sys -sys_stat.h -sys_stat.in.h -sys_wait.h -sys_wait.in.h -time.h -time.in.h -unistd--.h -unistd-safer.h -unistd.h -unistd.in.h -unistd_.h -unitypes.h -unitypes.in.h -uniwidth -uniwidth.h -uniwidth.in.h -unlocked-io.h -unsetenv.c -vasnprintf.c -vasnprintf.h -verify.h -vfprintf.c -vsnprintf.c -vsprintf.c -w32spawn.h -wait-process.c -wait-process.h -wchar.h -wchar.in.h -wchar_.h -wctype.h -wctype.in.h -wctype_.h -wcwidth.c -wcwidth.h -xalloc-die.c -xalloc.h -xmalloc.c -xsize.h -xstrndup.c -xstrndup.h diff --git a/lib/.gitignore b/lib/.gitignore index e88601a3..03887d94 100644 --- a/lib/.gitignore +++ b/lib/.gitignore @@ -1,222 +1,216 @@ -/*.a -/*.o -/*~ -/.deps -/Makefile -/Makefile.in -/alloca.h -/alloca.in.h -/argmatch.c -/argmatch.h -/asnprintf.c -/basename-lgpl.c -/basename.c -/binary-io.h -/bitrotate.h -/c-ctype.c -/c-ctype.h -/c-strcase.h -/c-strcasecmp.c -/c-strncasecmp.c -/charset.alias -/cloexec.c -/cloexec.h -/config.charset -/config.h -/config.hin -/configmake.h -/dirname-lgpl.c -/dirname.c -/dirname.h -/dup-safer-flag.c -/dup-safer.c -/dup2.c -/errno.h -/errno.in.h -/error.c -/error.h -/exitfail.c -/exitfail.h -/fatal-signal.c -/fatal-signal.h -/fcntl.c -/fcntl.h -/fcntl.in.h -/fd-safer-flag.c -/fd-safer.c -/float+.h -/float.h -/float.in.h -/fopen-safer.c -/fopen.c -/fprintf.c -/fpucw.h -/frexp.c -/frexpl.c -/fseterr.c -/fseterr.h -/getdtablesize.c -/getopt.c -/getopt.h -/getopt.in.h -/getopt1.c -/getopt_.h -/getopt_int.h -/getpagesize.c -/gettext.h -/gnulib.mk -/hash.c -/hash.h -/intprops.h -/inttypes.h -/inttypes.in.h -/inttypes_.h -/isnan.c -/isnand-nolibm.h -/isnand.c -/isnanf-nolibm.h -/isnanf.c -/isnanl-nolibm.h -/isnanl.c -/localcharset.c -/localcharset.h -/malloc.c -/math.h -/math.in.h -/mbrtowc.c -/mbsinit.c -/mbswidth.c -/mbswidth.h -/memchr.c -/memchr.valgrind -/obstack.c -/obstack.h -/open.c -/pipe-safer.c -/pipe.c -/pipe.h -/pipe2-safer.c -/pipe2.c -/printf-args.c -/printf-args.h -/printf-frexp.c -/printf-frexp.h -/printf-frexpl.c -/printf-frexpl.h -/printf-parse.c -/printf-parse.h -/printf.c -/quote.c -/quote.h -/quotearg.c -/quotearg.h -/rawmemchr.c -/rawmemchr.valgrind -/realloc.c -/ref-add.sed -/ref-add.sin -/ref-del.sed -/ref-del.sin -/sched.h -/sched.in.h -/sig-handler.h -/sigaction.c -/signal.h -/signal.in.h -/signbitd.c -/signbitf.c -/signbitl.c -/sigprocmask.c -/size_max.h -/snprintf.c -/spawn.h -/spawn.in.h -/spawn_faction_addclose.c -/spawn_faction_adddup2.c -/spawn_faction_addopen.c -/spawn_faction_destroy.c -/spawn_faction_init.c -/spawn_int.h -/spawnattr_destroy.c -/spawnattr_init.c -/spawnattr_setflags.c -/spawnattr_setsigmask.c -/spawni.c -/spawnp.c -/sprintf.c -/stamp-h1 -/stat.c -/stdbool.h -/stdbool.in.h -/stdbool_.h -/stddef.h -/stddef.in.h -/stdint.h -/stdint.in.h -/stdint_.h -/stdio--.h -/stdio-impl.h -/stdio-safer.h -/stdio-write.c -/stdio.h -/stdio.in.h -/stdlib.h -/stdlib.in.h -/stdlib_.h -/stpcpy.c -/strchrnul.c -/strchrnul.valgrind -/streq.h -/strerror.c -/string.h -/string.in.h -/string_.h -/stripslash.c -/strndup.c -/strnlen.c -/strtol.c -/strtoul.c -/strverscmp.c -/strverscmp.h -/sys -/sys_stat.h -/sys_stat.in.h -/sys_wait.h -/sys_wait.in.h -/time.h -/time.in.h -/unistd--.h -/unistd-safer.h -/unistd.h -/unistd.in.h -/unistd_.h -/unitypes.h -/unitypes.in.h -/uniwidth -/uniwidth.h -/uniwidth.in.h -/unlocked-io.h -/unsetenv.c -/vasnprintf.c -/vasnprintf.h -/verify.h -/vfprintf.c -/vsnprintf.c -/vsprintf.c -/w32spawn.h -/wait-process.c -/wait-process.h -/wchar.h -/wchar.in.h -/wchar_.h -/wctype.h -/wctype.in.h -/wctype_.h -/wcwidth.c -/wcwidth.h -/xalloc-die.c -/xalloc.h -/xmalloc.c -/xsize.h -/xstrndup.c -/xstrndup.h +*.a +*.bak +*.o +*~ +.deps +.dirstamp +Makefile +Makefile.in +alloca.h +alloca.in.h +arg-nonnull.h +argmatch.c +argmatch.h +asnprintf.c +basename-lgpl.c +basename.c +binary-io.h +bitrotate.h +c++defs.h +c-ctype.c +c-ctype.h +c-strcase.h +c-strcasecmp.c +c-strncasecmp.c +charset.alias +cloexec.c +cloexec.h +config.charset +config.h +config.hin +configmake.h +dirname-lgpl.c +dirname.c +dirname.h +dup-safer-flag.c +dup-safer.c +dup2.c +errno.h +errno.in.h +error.c +error.h +exitfail.c +exitfail.h +fatal-signal.c +fatal-signal.h +fcntl.c +fcntl.h +fcntl.in.h +fd-safer-flag.c +fd-safer.c +float+.h +float.h +float.in.h +fopen-safer.c +fopen.c +fprintf.c +fpucw.h +frexp.c +frexpl.c +fseterr.c +fseterr.h +getdtablesize.c +getopt.c +getopt.h +getopt.in.h +getopt1.c +getopt_int.h +gettext.h +gnulib.mk +hash.c +hash.h +intprops.h +inttypes.h +inttypes.in.h +isnan.c +isnand-nolibm.h +isnand.c +isnanf-nolibm.h +isnanf.c +isnanl-nolibm.h +isnanl.c +localcharset.c +localcharset.h +malloc.c +math.h +math.in.h +mbrtowc.c +mbsinit.c +mbswidth.c +mbswidth.h +memchr.c +memchr.valgrind +obstack.c +obstack.h +open.c +pipe-safer.c +pipe.c +pipe.h +pipe2-safer.c +pipe2.c +printf-args.c +printf-args.h +printf-frexp.c +printf-frexp.h +printf-frexpl.c +printf-frexpl.h +printf-parse.c +printf-parse.h +printf.c +quote.c +quote.h +quotearg.c +quotearg.h +rawmemchr.c +rawmemchr.valgrind +realloc.c +ref-add.sed +ref-add.sin +ref-del.sed +ref-del.sin +sched.h +sched.in.h +sig-handler.h +sigaction.c +signal.h +signal.in.h +signbitd.c +signbitf.c +signbitl.c +sigprocmask.c +size_max.h +snprintf.c +spawn.h +spawn.in.h +spawn_faction_addclose.c +spawn_faction_adddup2.c +spawn_faction_addopen.c +spawn_faction_destroy.c +spawn_faction_init.c +spawn_int.h +spawnattr_destroy.c +spawnattr_init.c +spawnattr_setflags.c +spawnattr_setsigmask.c +spawni.c +spawnp.c +sprintf.c +stamp-h1 +stat.c +stdbool.h +stdbool.in.h +stddef.h +stddef.in.h +stdint.h +stdint.in.h +stdio--.h +stdio-impl.h +stdio-safer.h +stdio-write.c +stdio.h +stdio.in.h +stdlib.h +stdlib.in.h +stpcpy.c +strchrnul.c +strchrnul.valgrind +streq.h +strerror.c +string.h +string.in.h +stripslash.c +strndup.c +strnlen.c +strtol.c +strtoul.c +strverscmp.c +sys +sys_stat.h +sys_stat.in.h +sys_wait.h +sys_wait.in.h +time.h +time.in.h +unistd--.h +unistd-safer.h +unistd.h +unistd.in.h +unitypes.h +unitypes.in.h +uniwidth +uniwidth.h +uniwidth.in.h +unlocked-io.h +unsetenv.c +vasnprintf.c +vasnprintf.h +verify.h +vfprintf.c +vsnprintf.c +vsprintf.c +w32spawn.h +wait-process.c +wait-process.h +waitpid.c +warn-on-use.h +wchar.h +wchar.in.h +wctype.h +wctype.in.h +wcwidth.c +xalloc-die.c +xalloc.h +xmalloc.c +xsize.h +xstrndup.c +xstrndup.h diff --git a/m4/.cvsignore b/m4/.cvsignore deleted file mode 100644 index a064dc6a..00000000 --- a/m4/.cvsignore +++ /dev/null @@ -1,142 +0,0 @@ -00gnulib.m4 -absolute-header.m4 -alloca.m4 -argmatch.m4 -asm-underscore.m4 -assert.m4 -cloexec.m4 -config-h.m4 -dirname.m4 -dos.m4 -double-slash-root.m4 -dup2.m4 -environ.m4 -errno_h.m4 -error.m4 -exitfail.m4 -exponentd.m4 -exponentf.m4 -exponentl.m4 -extensions.m4 -fatal-signal.m4 -fcntl-o.m4 -fcntl.m4 -fcntl_h.m4 -float_h.m4 -fopen.m4 -fpieee.m4 -fprintf-posix.m4 -frexp.m4 -frexpl.m4 -getdtablesize.m4 -getopt.m4 -getpagesize.m4 -gettext.m4 -gnulib-cache.m4 -gnulib-common.m4 -gnulib-comp.m4 -gnulib-tool.m4 -hash.m4 -iconv.m4 -include_next.m4 -inline.m4 -intlmacosx.m4 -intmax_t.m4 -inttypes-h.m4 -inttypes-pri.m4 -inttypes.m4 -isnand.m4 -isnanf.m4 -isnanl.m4 -javacomp.m4 -javaexec.m4 -ldexpl.m4 -lib-ld.m4 -lib-link.m4 -lib-prefix.m4 -libunistring-base.m4 -localcharset.m4 -locale-fr.m4 -locale-ja.m4 -locale-zh.m4 -longlong.m4 -malloc.m4 -math_h.m4 -mbrtowc.m4 -mbsinit.m4 -mbstate_t.m4 -mbswidth.m4 -memchr.m4 -mmap-anon.m4 -mode_t.m4 -multiarch.m4 -nls.m4 -nocrash.m4 -open.m4 -pipe.m4 -pipe2.m4 -po.m4 -posix_spawn.m4 -printf-frexp.m4 -printf-frexpl.m4 -printf-posix-rpl.m4 -printf-posix.m4 -printf.m4 -progtest.m4 -quote.m4 -quotearg.m4 -rawmemchr.m4 -realloc.m4 -sched_h.m4 -setenv.m4 -sig_atomic_t.m4 -sigaction.m4 -signal_h.m4 -signalblocking.m4 -signbit.m4 -snprintf-posix.m4 -snprintf.m4 -spawn_h.m4 -sprintf-posix.m4 -stat.m4 -stdbool.m4 -stddef_h.m4 -stdint.m4 -stdint_h.m4 -stdio-safer.m4 -stdio_h.m4 -stdlib_h.m4 -stpcpy.m4 -strchrnul.m4 -strerror.m4 -string_h.m4 -strndup.m4 -strnlen.m4 -strtol.m4 -strtoul.m4 -strverscmp.m4 -sys_stat_h.m4 -sys_wait_h.m4 -threadlib.m4 -time_h.m4 -unistd-safer.m4 -unistd_h.m4 -unlocked-io.m4 -vasnprintf.m4 -vfprintf-posix.m4 -vsnprintf-posix.m4 -vsnprintf.m4 -vsprintf-posix.m4 -wait-process.m4 -warn-on-use.m4 -warning.m4 -warnings.m4 -wchar.m4 -wchar_h.m4 -wchar_t.m4 -wctype.m4 -wctype_h.m4 -wcwidth.m4 -wint_t.m4 -xalloc.m4 -xstrndup.m4 diff --git a/m4/.gitignore b/m4/.gitignore index d4104e3a..dfbe31b0 100644 --- a/m4/.gitignore +++ b/m4/.gitignore @@ -1,142 +1,141 @@ -/00gnulib.m4 -/absolute-header.m4 -/alloca.m4 -/argmatch.m4 -/asm-underscore.m4 -/assert.m4 -/cloexec.m4 -/config-h.m4 -/dirname.m4 -/dos.m4 -/double-slash-root.m4 -/dup2.m4 -/environ.m4 -/errno_h.m4 -/error.m4 -/exitfail.m4 -/exponentd.m4 -/exponentf.m4 -/exponentl.m4 -/extensions.m4 -/fatal-signal.m4 -/fcntl-o.m4 -/fcntl.m4 -/fcntl_h.m4 -/float_h.m4 -/fopen.m4 -/fpieee.m4 -/fprintf-posix.m4 -/frexp.m4 -/frexpl.m4 -/getdtablesize.m4 -/getopt.m4 -/getpagesize.m4 -/gettext.m4 -/gnulib-cache.m4 -/gnulib-common.m4 -/gnulib-comp.m4 -/gnulib-tool.m4 -/hash.m4 -/iconv.m4 -/include_next.m4 -/inline.m4 -/intlmacosx.m4 -/intmax_t.m4 -/inttypes-h.m4 -/inttypes-pri.m4 -/inttypes.m4 -/isnand.m4 -/isnanf.m4 -/isnanl.m4 -/javacomp.m4 -/javaexec.m4 -/ldexpl.m4 -/lib-ld.m4 -/lib-link.m4 -/lib-prefix.m4 -/libunistring-base.m4 -/localcharset.m4 -/locale-fr.m4 -/locale-ja.m4 -/locale-zh.m4 -/longlong.m4 -/malloc.m4 -/math_h.m4 -/mbrtowc.m4 -/mbsinit.m4 -/mbstate_t.m4 -/mbswidth.m4 -/memchr.m4 -/mmap-anon.m4 -/mode_t.m4 -/multiarch.m4 -/nls.m4 -/nocrash.m4 -/open.m4 -/pipe.m4 -/pipe2.m4 -/po.m4 -/posix_spawn.m4 -/printf-frexp.m4 -/printf-frexpl.m4 -/printf-posix-rpl.m4 -/printf-posix.m4 -/printf.m4 -/progtest.m4 -/quote.m4 -/quotearg.m4 -/rawmemchr.m4 -/realloc.m4 -/sched_h.m4 -/setenv.m4 -/sig_atomic_t.m4 -/sigaction.m4 -/signal_h.m4 -/signalblocking.m4 -/signbit.m4 -/snprintf-posix.m4 -/snprintf.m4 -/spawn_h.m4 -/sprintf-posix.m4 -/stat.m4 -/stdbool.m4 -/stddef_h.m4 -/stdint.m4 -/stdint_h.m4 -/stdio-safer.m4 -/stdio_h.m4 -/stdlib_h.m4 -/stpcpy.m4 -/strchrnul.m4 -/strerror.m4 -/string_h.m4 -/strndup.m4 -/strnlen.m4 -/strtol.m4 -/strtoul.m4 -/strverscmp.m4 -/sys_stat_h.m4 -/sys_wait_h.m4 -/threadlib.m4 -/time_h.m4 -/unistd-safer.m4 -/unistd_h.m4 -/unlocked-io.m4 -/vasnprintf.m4 -/vfprintf-posix.m4 -/vsnprintf-posix.m4 -/vsnprintf.m4 -/vsprintf-posix.m4 -/wait-process.m4 -/warn-on-use.m4 -/warning.m4 -/warnings.m4 -/wchar.m4 -/wchar_h.m4 -/wchar_t.m4 -/wctype.m4 -/wctype_h.m4 -/wcwidth.m4 -/wint_t.m4 -/xalloc.m4 -/xstrndup.m4 +00gnulib.m4 +alloca.m4 +argmatch.m4 +asm-underscore.m4 +assert.m4 +cloexec.m4 +codeset.m4 +config-h.m4 +dirname.m4 +dos.m4 +double-slash-root.m4 +dup2.m4 +environ.m4 +errno_h.m4 +error.m4 +exponentd.m4 +exponentf.m4 +exponentl.m4 +extensions.m4 +fatal-signal.m4 +fcntl-o.m4 +fcntl.m4 +fcntl_h.m4 +float_h.m4 +fopen.m4 +fpieee.m4 +fprintf-posix.m4 +frexp.m4 +frexpl.m4 +getdtablesize.m4 +getopt.m4 +gettext.m4 +glibc21.m4 +gnulib-cache.m4 +gnulib-common.m4 +gnulib-comp.m4 +gnulib-tool.m4 +hash.m4 +iconv.m4 +include_next.m4 +inline.m4 +intlmacosx.m4 +intmax_t.m4 +inttypes-pri.m4 +inttypes.m4 +inttypes_h.m4 +isnand.m4 +isnanf.m4 +isnanl.m4 +javacomp.m4 +javaexec.m4 +ldexpl.m4 +lib-ld.m4 +lib-link.m4 +lib-prefix.m4 +libunistring-base.m4 +localcharset.m4 +locale-fr.m4 +locale-ja.m4 +locale-zh.m4 +longlong.m4 +malloc.m4 +math_h.m4 +mbrtowc.m4 +mbsinit.m4 +mbstate_t.m4 +mbswidth.m4 +memchr.m4 +mmap-anon.m4 +mode_t.m4 +multiarch.m4 +nls.m4 +nocrash.m4 +open.m4 +pipe.m4 +pipe2.m4 +po.m4 +posix_spawn.m4 +printf-frexp.m4 +printf-frexpl.m4 +printf-posix-rpl.m4 +printf-posix.m4 +printf.m4 +progtest.m4 +quote.m4 +quotearg.m4 +rawmemchr.m4 +realloc.m4 +sched_h.m4 +setenv.m4 +sig_atomic_t.m4 +sigaction.m4 +signal_h.m4 +signalblocking.m4 +signbit.m4 +size_max.m4 +snprintf-posix.m4 +snprintf.m4 +spawn_h.m4 +sprintf-posix.m4 +stat.m4 +stdbool.m4 +stddef_h.m4 +stdint.m4 +stdint_h.m4 +stdio-safer.m4 +stdio_h.m4 +stdlib_h.m4 +stpcpy.m4 +strchrnul.m4 +strerror.m4 +string_h.m4 +strndup.m4 +strnlen.m4 +strtol.m4 +strtoul.m4 +strverscmp.m4 +sys_stat_h.m4 +sys_wait_h.m4 +threadlib.m4 +time_h.m4 +unistd-safer.m4 +unistd_h.m4 +unlocked-io.m4 +vasnprintf.m4 +vfprintf-posix.m4 +vsnprintf-posix.m4 +vsnprintf.m4 +vsprintf-posix.m4 +wait-process.m4 +waitpid.m4 +warn-on-use.m4 +warnings.m4 +wchar_h.m4 +wchar_t.m4 +wctype_h.m4 +wcwidth.m4 +wint_t.m4 +xalloc.m4 +xsize.m4 +xstrndup.m4 diff --git a/po/.cvsignore b/po/.cvsignore deleted file mode 100644 index db44d74e..00000000 --- a/po/.cvsignore +++ /dev/null @@ -1,22 +0,0 @@ -*.gmo -*.po -*.po~ -.reference -LINGUAS -Makefile -Makefile.in -Makefile.in.in -Makevars -Makevars.template -POTFILES -Rules-quot -bison.pot -boldquot.sed -en@boldquot.header -en@quot.header -insert-header.sed -insert-header.sin -quot.sed -remove-potcdate.sed -remove-potcdate.sin -stamp-po diff --git a/po/.gitignore b/po/.gitignore index 79594c04..db44d74e 100644 --- a/po/.gitignore +++ b/po/.gitignore @@ -1,22 +1,22 @@ -/*.gmo -/*.po -/*.po~ -/.reference -/LINGUAS -/Makefile -/Makefile.in -/Makefile.in.in -/Makevars -/Makevars.template -/POTFILES -/Rules-quot -/bison.pot -/boldquot.sed -/en@boldquot.header -/en@quot.header -/insert-header.sed -/insert-header.sin -/quot.sed -/remove-potcdate.sed -/remove-potcdate.sin -/stamp-po +*.gmo +*.po +*.po~ +.reference +LINGUAS +Makefile +Makefile.in +Makefile.in.in +Makevars +Makevars.template +POTFILES +Rules-quot +bison.pot +boldquot.sed +en@boldquot.header +en@quot.header +insert-header.sed +insert-header.sin +quot.sed +remove-potcdate.sed +remove-potcdate.sin +stamp-po diff --git a/runtime-po/.cvsignore b/runtime-po/.cvsignore deleted file mode 100644 index db53cdef..00000000 --- a/runtime-po/.cvsignore +++ /dev/null @@ -1,22 +0,0 @@ -*.gmo -*.po -*.po~ -.reference -LINGUAS -Makefile -Makefile.in -Makefile.in.in -Makevars -Makevars.template -POTFILES -Rules-quot -bison-runtime.pot -boldquot.sed -en@boldquot.header -en@quot.header -insert-header.sed -insert-header.sin -quot.sed -remove-potcdate.sed -remove-potcdate.sin -stamp-po diff --git a/runtime-po/.gitignore b/runtime-po/.gitignore index 44ff8963..db53cdef 100644 --- a/runtime-po/.gitignore +++ b/runtime-po/.gitignore @@ -1,22 +1,22 @@ -/*.gmo -/*.po -/*.po~ -/.reference -/LINGUAS -/Makefile -/Makefile.in -/Makefile.in.in -/Makevars -/Makevars.template -/POTFILES -/Rules-quot -/bison-runtime.pot -/boldquot.sed -/en@boldquot.header -/en@quot.header -/insert-header.sed -/insert-header.sin -/quot.sed -/remove-potcdate.sed -/remove-potcdate.sin -/stamp-po +*.gmo +*.po +*.po~ +.reference +LINGUAS +Makefile +Makefile.in +Makefile.in.in +Makevars +Makevars.template +POTFILES +Rules-quot +bison-runtime.pot +boldquot.sed +en@boldquot.header +en@quot.header +insert-header.sed +insert-header.sin +quot.sed +remove-potcdate.sed +remove-potcdate.sin +stamp-po diff --git a/src/.cvsignore b/src/.cvsignore deleted file mode 100644 index 00e5045a..00000000 --- a/src/.cvsignore +++ /dev/null @@ -1,11 +0,0 @@ -*.flc -*.log -*.output -.deps -Makefile -Makefile.in -bison -scan-code.c -scan-gram.c -scan-skel.c -yacc diff --git a/src/.gitignore b/src/.gitignore index c259f416..4425956c 100644 --- a/src/.gitignore +++ b/src/.gitignore @@ -1,13 +1,14 @@ -/*.flc -/*.log -/*.o -/*.output -/.deps -/Makefile -/Makefile.in -/bison -/bison.exe -/scan-code.c -/scan-gram.c -/scan-skel.c -/yacc +*.flc +*.log +*.o +*.output +.deps +.dirstamp +Makefile +Makefile.in +bison +bison.exe +scan-code.c +scan-gram.c +scan-skel.c +yacc diff --git a/tests/.cvsignore b/tests/.cvsignore deleted file mode 100644 index c5b12971..00000000 --- a/tests/.cvsignore +++ /dev/null @@ -1,16 +0,0 @@ -*.dot -*.output -atconfig -atlocal -autom4te.cache -bison -calc -calc.[chy] -calc.tab.* -Makefile -Makefile.in -Makefile.in -package.m4 -testsuite -testsuite.dir -testsuite.log