X-Git-Url: https://git.saurik.com/bison.git/blobdiff_plain/fc3f467ff12133962ef69f58e60cb24fc29cc929..dd4bf078276e0ee7fac19a347ca13a7f078a2d3f:/ChangeLog diff --git a/ChangeLog b/ChangeLog index c8d3e981..370ecd05 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,1724 @@ +2006-10-12 Paul Eggert + + * data/Makefile.am (dist_pkgdata_DATA): Add bison.m4; this + accommodates the 2006-10-08 change. + +2006-10-11 Bob Rossi + + * data/push.c (yypushparse, yypvarsinit, yypvars): Wrap in b4_push_if. + (b4_yyssa, b4_yyerror_range): New macros. + (struct yypvars): Remove yyssa_ptr and yyerror_range_ptr fields. + (yypvarsinit): Remove init of removed fields. + (yypushparse): Remove use of removed fields; use new macros instead. + +2006-10-11 Paul Eggert + + * data/push.c (yypushparse): Fix memory leak if yymsg is malloced + in a push parser. Reindent slightly to match yacc.c better. + +2006-10-11 Bob Rossi + + * data/push.c (struct yypvars): Remove yymsgbuf, yymsgbuf_ptr, yymsg, + yymsg_alloc fields. + (yypvarsinit, yypushparse): Remove init of removed fields. + (yypushparse): Use yymsgbuf instead of yymsgbuf_ptr. + +2006-10-09 Paul Eggert + + * THANKS: Add Paolo Bonzini and Bob Rossi. + +2006-10-08 Paolo Bonzini + + * data/c.m4 (b4_copyright, b4_epilogue, b4_location_initial_column, + b4_location_initial_line, p4_parse_param, b4_ints_in, b4_flag_if, + b4_define_flag_if and uses, b4_basename, b4_syncline, b4_user_code, + b4_define_user_cde and uses): Remove. + (b4_comment, b4_prefix, b4_sync_start): New. + * data/bison.m4: New file, with most of the content removed from c.m4. + * src/muscle_tab.h: Use "do {...} while(0)" throughout. + * src/output.c (output_skeleton): Pass bison.m4. + (prepare): Pass glr_flag and nondeterministic_flag. Pass prefix + only if specified. + +2006-10-05 Paul Eggert + + Fix test failure reported by Tom Lane in + + and try to make such failures easier to catch in the future. + * data/glr.c (YYTRANSLATE): Don't check for nonpositive arg; + that's now the caller's responsibility. + (yyprocessOneStack, yyrecoverSyntaxError, yyparse): + Set yychar = YYEOF if it's negative. + * tests/actions.at (yylex): Abort if asked to read past EOF. + * tests/conflicts.at (yylex): Likewise. + * tests/cxx-type.at (yylex): Likewise. + * tests/glr-regression.at (yylex): Likewise. + * tests/input.at (yylex): Likewise. + * tests/regression.at (yylex): Likewise. + * tests/torture.at (yylex): Likewise. + +2006-10-01 Paul Eggert + + Fix problems with translating English-language diagnostics. + * bootstrap: Fix bug introduced in recent bootstrap changes, with + respect to bison-runtime pot generation. The YY_ stuff + wasn't being captured. + * bootstrap.conf (XGETTEXT_OPTIONS_RUNTIME): New var. + * po/POTFILES.in: Add src/location.c, src/scan-code.l. + * runtime-po/POTFILES.in: Add data/push.c. + +2006-09-29 Paul Eggert + + Merge bootstrap changes from coreutils. + + 2006-09-28 Jim Meyering + + Automatically generated dependencies are important even + when all of the sources in a directory come from gnulib. + * bootstrap (gnulib_tool): Remove the "no-dependencies" automake + option that gnulib-tool adds to what becomes our lib/gnulib.mk. + + 2006-09-23 Jim Meyering + + * bootstrap (gnulib_tool_options): Add "--local-dir gl". + + 2006-09-20 Paul Eggert + + * bootstrap: Add support for --force. + (usage): New function. Describe usage less tersely. + (CVS_only_file): New var. + +2006-09-21 Paul Eggert + + * data/push.c (YYPUSH_MORE): Make it an enum instead. + (yypushparse): Use YYPUSH_MORE instead of the mystery constant. + Adjust white space and comments to match GNU style better. + +2006-09-20 Bob Rossi + + * data/push.c (yyresult_get): Remove function. + (YYPUSH_MORE): Add #define. + (yypushparse): Modify return value. + +2006-09-20 Paul Eggert + + * stamp-h.in: Remove; no longer needed. + * .cvsignore: Replace autom4te.cache and config.cache with *.cache. + Remove config.h, config.hin, intl (no longer created). + * lib/.cvsignore: Add config.h, config.hin, configmake.h, inttypes.h, + stamp-h1. + + Sync bootstrap from coreutils, as follows: + + 2006-09-18 Paul Eggert + + * bootstrap (symlink_to_gnulib): New function. + (cp_mark_as_generated): Use it, to prefer symlinks-to-gnulib + to copies-of-gnulib. + (cp_mark_as_generated, slurp, gnulib_files): + Avoid making a copy if it's the same as the old version. + (gnulib_files): Add support for this variable (used by Bison). + +2006-09-20 Paul Eggert + + * src/getargs.c (usage): Rework to use conventions similar to + coreutils, to make translation a bit easier and the code a bit + smaller. Problem reported by Tim Van Holder. + +2006-09-15 Paul Eggert + + Use some of gnulib's new modules, taken from coreutils. + + * bootstrap: Sync from coreutils, except add support for gnulib_files. + * bootstrap.conf: New file. + (gnulib_modules): Add configmake, inttypes, unistd. + (XGETTEXT_OPTIONS): Add complain, complain_at, + fatal, fatal_at, warn, warn_at, unexpected_end. + * configure.ac (AC_CONFIG_HEADERS): config.h is now in lib, not here. + (gl_USE_SYSTEM_EXTENSIONS): Remove; gl_EARLY now does this. + (gl_EARLY): Add. + (AM_STDBOOL_H): Remove; gl_INIT now dows this. + (gl_INIT): Add + (GNULIB_AUTOCONF_SNIPPET): Remove. + (AM_GNU_GETTEXT): Add; require formatstring macros since that's + the pickiest. + * lib/.cvsignore: Add inttypes_.h. + * lib/Makefile.am: Include gnulib.mk first so we can append to it. + (AM_CFLAGS): Add WERROR_CFLAGS, to be more like coreutils. + (BUILT_SOURCES, EXTRA_DIST, MOSTLYCLEANFILES): Remove + no-longer-necessary initializations. + (lib_SOURCES): Remove, replacing by libbison_a_SOURCES. + * lib/subpipe.c: Include unconditionally, now that we + use the unistd module. + * src/system.h: Likewise. + * m4/.cvsignore: Remove *_gl.m4, gnulib.m4, inttypes_h.m4, uintmax_t.m4, + ulonglong.m4. Add gettext.m4, gnulib-cache.m4, gnulib-comp.m4, + gnulib-tool.m4, inttypes-h.m4, inttypes-pri.m4, inttypes.m4. + * src/Makefile.am (DEFS): Remove, since configmake does this for us. + (AM_CPPFLAGS): Remove -I../lib, since Automake does that for us. + * src/system.h: Include inttypes.h unconditionally, now that we + use the inttypes module. Don't bother to include stdint.h, since + inttypes.h now does that for us. + (LOCALEDIR): Remove, now that we use the configmake module. + * src/getargs.c: Include configmake.h. + * src/main.c: Likewise. + * src/output.c: Likewise. + * tests/atlocal.in (CPPFLAGS): Include from $abs_top_builddir/lib, + not from $abs_top_builddir, since config.h moved. + + + Port to GCC 2.95. First two problems reported by Michael Deutschmann in + . + + * src/parse-gram.y (symbol_declaration): Don't put statements + before declarations; it's not portable to C89. + * src/scan-code.l (handle_action_at): Likewise. + + * src/scan-code.l: Always initialize braces_level; the old code + left it uninitialized and therefore had undefined behavior. + + Don't attempt to redefine 'assert', since it runs afoul of + systems where standard headers (mistakenly) include . + Instead, define and use our own alternative, called 'aver'. + * src/reader.c: Don't include assert.h, since we no longer + use assert. + * src/scan-code.l: Likewise. + * src/system.h (assert): Remove, replacing with.... + (aver): New function, taking a bool arg. All uses changed. + * src/tables.c (pack_vector): Ensure that aver arg is bool, + not merely an integer. + +2006-09-15 Bob Rossi + + * data/Makefile.am (dist_pkgdata_DATA): Add push.c. + * data/c.m4 (YYPUSH): New. + (b4_push_if): New macro. Use it instead of #ifdef YYPUSH. + * src/getargs.c (push_parser): New var. + * src/getargs.h (push_parser): New declaration. + * src/output.c (prepare): Add macro insertion of `push_flag'. + * src/parse-gram.y (PERCENT_PUSH_PARSER): New token. + (prologue_declaration): Parse %push-parser. + * src/scan-gram.l: Scan new PERCENT_PUSH_PARSER token. + * tests/calc.at (_AT_CHECK_CALC_ERROR): Add "Return" and "Now" to + list of removed lines from the traces observed. + (AT_CHECK_CALC_LALR): Added push parser tests. + +2006-09-13 Paul Eggert + + * NEWS: Version 2.3a. + * configure.ac (AC_INIT): Likewise. + + * tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Remove + "#define YYSTYPE int" that caused "make maintainer-check" to fail + due to header ordering dependencies. I don't know why the #define + was there. + + Fix glr.cc and lalr1.cc's use of YYDEBUG so that there's zero + runtime cost when YYDEBUG is not defined, and so that some tests + that used to fail now work. Problem and initial suggestion by + Paolo Bonzini. + * data/c++.m4 (b4_parse_param_cons): Omit leading ','. + * data/glr.cc (b4_parser_class_name): + Initialize yycdebug_ only if YYDEBUG. Also, initialize yydebug_. + (debug_level, set_debug_level): Affect yydebug_, not ::yydebug. + (yydebug_) [YYDEBUG]: New member. + (yycdebug_): Now defined only if YYDEBUG. + * data/lalr1.cc (yydebug_, yycdebug_): Now defined only if YYDEBUG. + (YYCDEBUG) [!YYDEBUG]: Don't use yydebug_ and yycdebug_. + (b4_parser_class_name): Initialize yydebug_ and yycdebug_ only + if YYYDEBUG. + (debug_stream, set_debug_stream, debug_level, set_debug_level): + Define only if YYDEBUG. + * tests/calc.at (_AT_DATA_CALC_Y) [!YYDEBUG]: Omit call to + set_debug_level. + * tests/regression.at (_AT_DATA_DANCER_Y) [!YYDEBUG]: Likewise. + * tests/calc.at (AT_CHECK_CALC_GLR_CC): Uncomment calls to + AT_CHECK_CALC_GLR_CC that are working now. + +2006-09-12 Paul Eggert + + * data/glr.cc (YYERROR_VERBOSE, YYTOKEN_TABLE): Remove. + We don't need them in glr.cc, and glr.c defines them. + Defining YYERROR_VERBOSE to 0 here breaks glr.c, since glr.c + assumes that defining it to anything is the same as defining + it to 1. Problem reported by Paolo Bonzini. + +2006-09-12 Paolo Bonzini (tiny change) + + * data/c.m4 (b4_null, b4_case): Define. + * src/output.c (prepare_symbols): Use b4_null. + (user_actions_output): Use b4_case. + +2006-09-11 Paul Eggert + + * data/glr.c (b4_shared_declarations): Put start-header first, + before any #includes that we generate, so that feature-test + macros work. Problem reported by Michael Deutschmann in + . + * data/lalr1.cc: Likewise. + * doc/bison.texinfo (Prologue): Document that feature-test macros + should be defined before any Bison declarations. + * tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Put defns + that depend on location.hh after, not before, Bison decls, since + we now include location.hh after the first user prologue. + + * doc/bison.texinfo (Calc++ Parser): Fix memory leak reported by + Sander Brandenburg in + . + Also, fix minor white space and comment issues. + (Prologue): Mention that it's better to define feature-test macros + before Bison declarations. Problem reported by Michael Deutschmann. + + * README-cvs: Fix typo: "&" should be "&&". Problem reported + by Jim Meyering. + * m4/.cvsignore: Add argmatch.m4. Remove obstack.m4, strerror_r.m4. + This adjusts to recent gnulib changes. + +2006-09-04 Joel E. Denny + + Finish implementation of per-type %destructor/%printer. Discussed + starting at + + and + . + * NEWS (2.3+): Add a description of this feature to the default + %destructor/%printer description. + * doc/bison.texinfo (Freeing Discarded Symbols): Likewise. + * src/symlist.c (symbol_list_destructor_set, symbol_list_printer_set): + Invoke semantic_type_destructor_set or semantic_type_printer_set when a + list node contains a semantic type. + * src/symtab.c, src/symtab.h: Extend with a table that associates + semantic types with their %destructor's and %printer's. + (semantic_type_from_uniqstr, semantic_type_get, + semantic_type_destructor_set, semantic_type_printer_set): New functions + composing the public interface of that table. + (symbol_destructor_get, symbol_destructor_location_get, + symbol_printer_get, symbol_printer_location_get): If there's no + per-symbol %destructor/%printer, look up the per-type before trying + the default. + * tests/actions.at (Per-type %printer and %destructor): New test case. + * tests/input.at (Default %printer and %destructor redeclared): + Extend to check that multiple occurrences of %symbol-default in a + single %destructor/%printer declaration is an error. + (Per-type %printer and %destructor redeclared, Unused values with + per-type %destructor): New test cases. + +2006-09-04 Joel E. Denny + + Require default %destructor/%printer to be declared using + %symbol-default instead of an empty symbol list, and start working on + new per-type %destructor/%printer. Discussed at + . + * NEWS (2.3+): Add %symbol-default to example. + * bison.texinfo (Freeing Discarded Symbols): Likewise. + (Bison Symbols): Add entry for %symbol-default. + * src/parse-gram.y (PERCENT_SYMBOL_DEFAULT): New token. + (generic_symlist, generic_symlist_item): New nonterminals for creating + a list in which each item is a symbol, semantic type, or + %symbol-default. + (grammar_declaration): Use generic_symlist in %destructor and %printer + declarations instead of symbols.1 or an empty list. + (symbol_declaration, precedence_declaration, symbols.1): Update actions + for changes to symbol_list. + * src/reader.c: Update for changes to symbol_list. + * src/scan-code.l: Likewise. + * src/scan-gram.l: Scan new PERCENT_SYMBOL_DEFAULT token. + * src/symlist.c, src/symlist.h: Extend such that a list node may + represent a semantic type or a %symbol-default in addition to just an + ordinary symbol. Add switched functions for setting %destructor's and + %printer's. + * tests/actions.at, tests/input.at: Add %symbol-default to all default + %destructor/%printer declarations. + +2006-08-23 Joel E. Denny + + Whether the default %destructor/%printer applies to a particular symbol + isn't a question of whether the user *declares* that symbol (in %token, + for example). It's a question of whether the user by any means + *defines* the symbol at all (by simply using a char token, for + example). $end is defined by Bison whereas any other token with token + number 0 is defined by the user. The error token is always defined by + Bison regardless of whether the user declares it with %token, but we + may one day let the user define error as a nonterminal instead. + * NEWS (2.3+): Say "user-defined" instead of "user-declared". + * doc/bison.texinfo (Freeing Discarded Symbols): Likewise, and document + the meaning of "user-defined". + * tests/actions.at (Default %printer and %destructor for user-declared + end token): Rename to... + (Default %printer and %destructor for user-defined end token): ... + this. + + * src/symtab.c (symbol_destructor_get, symbol_printer_get): In the + computation of whether to apply the default, don't maintain a list of + every Bison-defined symbol. Instead, just check for a first character + of '$', which a user symbol cannot have, and check for the error token. + +2006-08-21 Joel E. Denny + + Don't apply the default %destructor or %printer to the error token, + $undefined, or $accept. This change fits the general rule that the + default %destructor and %printer are only for user-declared symbols, + and it solves several difficulties that are described in the new test + cases listed below. + * src/symtab.c (symbol_destructor_get, symbol_printer_get): Implement. + * tests/actions.at (Default %printer and %destructor are not for error + or $undefined, Default %printer and %destructor are not for $accept): + New test cases. + +2006-08-19 Joel E. Denny + + Allow %start after the first rule. + * src/reader.c (grammar_current_rule_begin): Don't set the start symbol + when parsing the first rule. + (check_and_convert_grammar): Search for it here after all grammar + declarations have been parsed. Skip midrules, which have dummy LHS + nonterminals. + * src/symtab.c (symbol_is_dummy): New function. + * src/symtab.h (symbol_is_dummy): Declare it. + * tests/input.at (%start after first rule): New test. + +2006-08-18 Joel E. Denny + + Redo some of the previous commit: add back the ability to use + non-aliased/undeclared string literals since it might be useful to + those declaring %token-table. + * src/reader.c (check_and_convert_grammar): Undo changes in previous + commit: don't worry about complaints from symbols_pack. + * src/symtab.c (symbol_new, symbol_class_set, + symbol_check_alias_consistency): Undo changes in previous commit: count + each string literal as a new symbol and token, assign it a symbol + number, and don't complain about non-aliased string literals. + (symbols_pack): Since symbol_make_alias still does not decrement symbol + and token counts but does still set aliased tokens to the same number, + symbol_pack_processor now leaves empty slots in the symbols array. + Remove those slots. + * tests/regression.at (Undeclared string literal): Remove test case + added in previous commit since non-aliased string literals are allowed + again. + (Characters Escapes, Web2c Actions): Undo changes in previous commit: + remove unnecessary string literal declarations. + * tests/sets.at (Firsts): Likewise. + +2006-08-18 Joel E. Denny + + Don't allow an undeclared string literal, but allow a string literal to + be used before its declaration. + * src/reader.c (check_and_convert_grammar): Don't invoke packgram if + symbols_pack complained. + * src/symtab.c (symbol_new): Don't count a string literal as a new + symbol. + (symbol_class_set): Don't count a string literal as a new token, and + don't assign it a symbol number since symbol_make_alias does that. + (symbol_make_alias): It's not necessary to decrement the symbol and + token counts anymore. Don't assume that an alias declaration occurs + before any uses of the identifier or string, and thus don't assert that + one of them has the highest symbol number so far. + (symbol_check_alias_consistency): Complain if there's a string literal + that wasn't declared as an alias. + (symbols_pack): Bail if symbol_check_alias_consistency failed since + symbol_pack asserts that every token has been assigned a symbol number + although undeclared string literals have not. + * tests/regression.at (String alias declared after use, Undeclared + string literal): New test cases. + (Characters Escapes, Web2c Actions): Declare string literals as + aliases. + * tests/sets.at (Firsts): Likewise. + +2006-08-14 Joel E. Denny + + In the grammar scanner, STRING_FINISH unclosed constructs and return + them to the parser in order to improve error messages. + * src/scan-gram.l (SC_ESCAPED_STRING, SC_ESCAPED_CHARACTER, + SC_BRACED_CODE, SC_PROLOGUE): Implement. + * tests/input.at (Unclosed constructs): New test case. + * tests/regression.at (Invalid inputs): Update now that unclosed %{ is + seen. + + * src/scan-gram.h, src/scan-gram.l (gram_last_braced_code_loc): Remove + unused global. + +2006-08-13 Joel E. Denny + + Handle string aliases for character tokens correctly. + * src/symtab.c (symbol_user_token_number_set): If the token has an + alias, check and set its alias's user token number instead of its own, + which is set to indicate the alias. Previously, every occurrence of + the character token in the grammar overwrote that alias indicator with + the character code. + * tests/input.at (String aliases for character tokens): New test. + +2006-08-12 Joel E. Denny + + * src/parse-gram.y: Add `%expect 0' so we don't overlook conflicts. + +2006-08-11 Paul Eggert + + * bootstrap: Put in need-ngettext argument to AM_GNU_GETTEXT, + to prevent failures when building on older platforms. + Check for autopoint failure. + Set XGETTEXT_OPTIONS to values that check for C format strings, + so that translators are warned about them (this also helps + prevent core dumps). + + * lib/subpipe.c (create_subpipe): Use new gnulib pipe_safer + function, since it simplifies our code a bit. + + * configure.ac (AC_ARG_ENABLE): Use -Wextra -Wno-sign-compare + rather than -W, so we don't get bogus warnings about sign comparisons. + Add -Wpointer-arith, since that warning is useful (it reports code + that does not conform to C89 and that some compilers reject). + * data/c.m4, data/glr.c, data/lalr1.cc, data/yacc.c: Undo latest change, + since it's no longer needed. + +2006-08-10 Joel E. Denny + + Clean up scanners a bit. + * src/flex-scanner.h (FLEX_NO_OBSTACK): New macro that blocks obstack + definitions so gcc won't warn when obstack_for_string is unused. + * src/scan-code.l: config.h and system.h are already #include'd by + scan-code-c.c, so get rid of them here. + * src/scan-gram.l: Likewise. + * src/scan-skel.l: Likewise, and use flex-scanner.h without obstack + definitions rather than duplicating the rest of it. + * src/scan-gram-c.c, scan-skel-c.c: #include "system.h". + +2006-08-09 Joel E. Denny + + Suppress signed/unsigned comparison warnings for yycheck. + * data/c.m4 (b4_safest_int_type): New macro. + * data/glr.c, data/lalr1.cc: Wherever you compare yycheck[i] against + a signed int type, cast it to b4_safest_int_type first. + * data/yacc.c: Likewise. + (b4_safest_int_type): Overwrite the one from c.m4 since b4_int_type is + also overwritten. + +2006-08-09 Ralf Wildenhues (tiny change) + + * doc/bison.texinfo: Fix some typos. + +2006-08-02 Paul Eggert + + * m4/.cvsignore: Add inttypes_h.m4,lib-ld.m4, lib-prefix.m4, + po.m4, stdint_h.m4, uintmax_t.m4, ulonglong.m4, warning.m4. + + * bootstrap (gnulib_tool): Stop using --assume-autoconf; + the latest gnulib does this a different way. + (get_translations): Sharuzzaman Ahmat Raslan reported that the ms + translation was patched, so stop omitting it. + +2006-07-29 Joel E. Denny + + Enable declaration of default %printer/%destructor. Make the parser + use these for all user-declared grammar symbols for which the user does + not declare a specific %printer/%destructor. Thus, the parser uses it + for token 0 if the user declares it but not if Bison generates it as + $end. Discussed starting at + , + , + and + . + * NEWS (2.3+): Mention. + * doc/bison.texinfo (Actions in Mid-Rule): It's no longer impossible to + declare a %destructor for a mid-rule's semantic value. It's just + impossible to declare one specific to it. + (Freeing Discarded Symbols): Mention that @$ can be used in %destructor + code. Describe default %destructor form. + * src/parse-gram.y (grammar_declaration): Parse default + %printer/%destructor declarations. + * src/output.c (symbol_destructors_output): Use symbol_destructor_get + and symbol_destructor_location_get rather than accessing the destructor + and destructor_location members of struct symbol. + (symbol_printers_output): Likewise but for %printer's. + * src/reader.c (symbol_should_be_used): Likewise but for %destructor's + again. + * src/symtab.c (default_destructor, default_destructor_location, + default_printer, default_printer_location): New static global + variables to record the default %destructor and %printer. + (symbol_destructor_get, symbol_destructor_location_get, + symbol_printer_get, symbol_printer_location_get): New functions to + compute the appropriate %destructor and %printer for a symbol. + (default_destructor_set, default_printer_set): New functions to set the + default %destructor and %printer. + * src/symtab.h: Prototype all those new functions. + * tests/actions.at (Default %printer and %destructor): New test to + check that the right %printer and %destructor are called, that they're + not called for $end, and that $$ and @$ work correctly. + (Default %printer and %destructor for user-declared end token): New + test to check that the default %printer and %destructor are called for + a user-declared end token. + * tests/input.at (Default %printer and %destructor redeclared, Unused + values with default %destructor): New tests to check related grammar + warnings and errors. + +2006-07-29 Joel E. Denny + + Clean up handling of %destructor for the end token (token 0). + Discussed starting at + + and + . + + Make the skeletons consistent in how they pop the end token and invoke + its %destructor. + * data/glr.c (yyrecoverSyntaxError, yyparse): Don't pop the start + state, which has token number 0, since this would invoke the + %destructor for the end token. + * data/lalr1.cc (yy::parser::parse): Don't check for the final state + until after shifting the end token, or else it won't be popped. + * data/yacc.c (yyparse): Likewise. + + * data/glr.c (yyparse): Clear the lookahead after shifting it even when + it's the end token. Upon termination, destroy an unshifted lookahead + even when it's the end token. + * data/lalr1.cc (yy::parser::parse): Likewise. + * data/yacc.c (yyparse): Likewise. + + * src/reader.c (packgram): Don't check rule 0. This suppresses unused + value warnings for the end token when the user gives the end token a + %destructor. + + * tests/actions.at (Printers and Destructors): Test all the above. + +2006-07-24 Paul Eggert + + Update to latest gnulib and gettext versions. + * bootstrap (gnulib-modules): Remove hard-locale, stdio-safer. + Add fopen-safer. + (gnulib_files): Add m4/warning.m4. Don't worry about files + overwritten by autopoint. + Replace gt_INTL_SUBDIR_CORE with an empty body in m4/gettext_gl.m4. + Suppress "id", "ms", "tr" translations for now, since gettext 0.15 + rejects them. + Don't use autoreconf; instead, invoke autopoint etc. by hand, + so that we can remove the intl files at a better time. + (intl_files_to_remove): Remove aclocal.m4, since it gets + rebuilt anyway. Remove m4/inttypes_h.m4, m4/inttypes.m4, + m4/isc-posix.m4, m4/lib-ld.m4, m4/lib-prefix.m4, m4/po.m4, + m4/stdint_h.m4, m4/uintmax_t.m4, m4/ulonglong.m4. + Add m4/inttypes-h.m4, m4/lock.m4, m4/visibility.m4. + Remove datarootdir hack; no longer needed. + * configure.ac: Use gl_WARNING_CFLAGS rather than BISON_WARNING. + (AM_GNU_GETTEXT_VERSION): Bump from 0.12 to 0.15. + * lib/.cvsignore: Remove hard-locale.c, hard-locale.h, strdup.c, + strdup.h. + * m4/.cvsignore: Remove hard-locale.m4, strdup.m4. + * m4/warning.m4: Remove from CVS, since we now use gnulib's version. + +2006-07-20 Paul Eggert + + * bootstrap: Adjust to today's change to gnulib-tool by invoking + it with --assume-autoconf='latest-stable'. + +2006-07-13 Joel E. Denny + + * src/parse-gram.y (grammar_declaration): Don't confuse Doxygen (at + least 1.4.7 and 1.4.4) by putting a #line between `typedef union + YYSTYPE' and `{'. + * src/muscle_tab.h (muscle_grow): Replace the header comments with + those from muscle_tab.c since the old ones are misleading. + +2006-07-13 Akim Demaille + + Support %define "KEY" {VALUE}. + * src/scan-code.h, src/scan-code.l (translate_action) + (translate_rule_action, translate_symbol_action, translate_code): + Return char *, not const char *. + * src/parse-gram.y (declaration): Rename as... + (prologue_declaration): this. + (string_content): Remove this nonterminal, use STRING. + (braceless, content, content.opt): New nonterminal. + Use them. + (%define): Now accept content.opt, i.e., accept also BRACED_CODE + as value. + * src/scan-gram.l (getargs.h): Don't include it. + +2006-07-12 Paul Eggert + + * data/lalr1.cc (YYCDEBUG): Use 'if (yydebug_) (*yycdebug_)' + rather than a for-loop that declares a local bool variable. This + should work around a compatibility problem with a Cray x1e C++ + compiler reported by Hung Nguyen in + . + The for-loop was introduced in the 2004-11-17 change but I don't + know why it was needed. + +2006-07-12 Akim Demaille + + * data/c.m4: Comment changes. + +2006-07-10 Akim Demaille + + * src/complain.c (error_message, ERROR_MESSAGE): New. + To factor... + (fatal_at, fatal, warn_at, warn, complain_at, complain): these. + * src/complain.h, src/complain.c (warning_issued): Remove, unused. + +2006-07-09 Paul Eggert + + * NEWS: Instead of %union, you can define and use your own union type + YYSTYPE if your grammar contains at least one tag. + Your YYSTYPE need not be a macro; it can be a typedef. + * doc/bison.texinfo (Value Type, Multiple Types, Location Type): + (Union Decl, Decl Summary): Document this. + * data/glr.c (YYSTYPE): Implement this. + * data/glr.cc (YYSTYPE): Likewise. + * data/lalr1.cc (YYSTYPE): Likewise. + * data/yacc.c (YYSTYPE): Likewise. + * src/output.c (prepare): Output tag_seen_flag. + * src/parse-gram.y (declaration, grammar_declaration): + Use 'union_seen' rather than 'typed' to determine whether + %union has been seen, since grammars can now be typed without + %union. + (symbol_declaration, type.opt, symbol_def): + Keep track of whether a tag has been seen. + * src/reader.c (union_seen, tag_seen): New vars. + (typed): remove. + * src/reader.h (union_seen, tag_seen, typed): Likewise. + * src/scan-code.l (untyped_var_seen): New variable. + (handle_action_dollar): Adjust to above changes. + (handle_action_dollar, handle_action_at): + Improve overflow checking for outlandish numbers. + * tests/input.at (AT_CHECK_UNUSED_VALUES): Redo test to + avoid new diagnostics generated by above changes. + * tests/regression.at (YYSTYPE typedef): Add test to check + for type tags without %union. + + * src/symlist.c (symbol_list_length): Return int, not unsigned + int, since callers expect int. This may need to get revisited + once we have proper integer overflow checking. + + * src/scan-gram.h (gram_scanner_cursor): Remove decl, since this + object is now static. + + * src/getargs.c (flags_argmatch): Return void, not int, + to pacify ./configure --enable-gcc-warnings. + + * src/flex-scanner.h (STRING_FREE): Don't use FLEX_PREFIX (last_string) + since last_string is already defined to FLEX_PREFIX (last_string). + +2006-07-09 Akim Demaille + + Implement --warnings/-W. + * src/getargs.c (report_argmatch, trace_argmatch): Remove, + replaced by... + (flags_argmatch, FLAGS_ARGMATCH): this new function and macro. + Adjust callers. + * src/getargs.h, src/getargs.c (warnings, warnings_flags) + (warnings_args, warnings_types): New. + (getargs, short_options, long_options): Accept -W/--warnings. + Sort the options by alphabetical order, upper case letter right + before its lower case. + +2006-07-09 Joel E. Denny + + Change %merge result type clash warnings to errors. Discussed at + . + * src/reader.c (record_merge_function_type): Use complain_at. + * tests/glr-regression.at (Missed %merge type warnings when LHS type is + declared later): Update test case results. + +2006-07-09 Akim Demaille + + * src/getargs.h, src/getargs.c: Swap --report and --trace handling + to be in alphabetical order. + (trace_args): Spelling fixes. + +2006-07-09 Paul Eggert + + * data/yacc.c (YYID, yy_stack_print): Prefix local vars with "yy" + so they don't collide with user-defined macros. + (yy_stack_print): Don't assume that yytype_int16 promotes to int; + this was never guaranteed, and now that we're using gnulib stdint, + which defines int_fast16_t to long int, the problem is exposed. + +2006-07-08 Paul Eggert + + * data/c.m4 (b4_basename): Simplify a bit, since we don't + need the full POSIX semantics (and weren't implementing them + anyway). + + Adjust to Autoconf 2.60 and today's gnulib. + * bootstrap (gnulib_modules): Add stdint. + Remove special case for m4/onceonly_2_57.m4, since gnulib-tool + no longer copies it. + (intl_files_to_remove): Remove m4/longlong.m4 and m4/wchar_t.m4, + since stdint needs the former and wcwidth (which is now required + by mbswidth) needs the latter. + Append 'datarootdir = @datarootdir@' to po/Makefile.in.in, to + work around a compatibility glitch between gettext 0.14.6 and + Autoconf 2.60. + * configure.ac (AC_PREREQ): Require Autoconf 2.60. + Do not check for uintptr_t, since new stdint module does the right + thing. + * lib/.cvsignore: Remove alloca.c, alloca.h, alloca_.h. + Add stdint.h, stdint_.h, wcwidth.h. + * m4/.cvsignore: Remove alloca.m4, onceonly.m4. + Add absolute-header.m4, double-slash-root.m4, longlong.m4, + stdint.m4, wchar_t.m4, wcwidth.m4. + * src/files.c: Include and in the + usual order for ../lib/*.h files. + (file_name_split): Use last_component, not base_name, to adjust + to gnulib changes. + * src/parse-gram.h: Include in the usual order + for ../lib/*.h files. + (YYTYPE_INT16, YYTYPE_INT8, YYTYPE_UINT16, YYTYPE_UINT8): + Define unconditionally, since we now assume the stdint module. + * src/scan-skel.l: Include . + (BASE_QPUTS): Use last_component, not base_name. + * src/system.h: Include in the usual order + for ../lib/*.h files. Include unconditionally, + since we now use the stdint module. + (uintptr_t): Declare if UINTPTR_MAX is not defined, not + HAVE_UINTPTR_T, since we now use the stdint module. + (base_name): Remove decl, since files now include + to get the decl. + +2006-07-08 Akim Demaille + + * data/c.m4 (b4_location_initial_column, b4_location_initial_line): + New, default to 1. + * data/yacc.c, data/glr.c, data/location.cc: Use them. + * NEWS, doc/bison.texinfo: The initial column and line are 1 by + default. + * tests/calc.at: Adjust. + +2006-07-08 Akim Demaille + + * data/c.m4 (b4_basename): New. + (b4_syncline): Also output the location of its invocation (from + the skeleton). + (b4_user_action, b4_define_user_action, b4_user_actions) + (b4_user_initial_action, b4_user_post_prologue, b4_user_start_header) + (b4_user_stype): New. + * data/yacc.c, data/glr.c, data/lalr1.cc, data/glr.cc: Use them. + +2006-07-07 Joel E. Denny + + In the grammar file, the first column is 1 not 0 on the first line as + on every other line. + * src/parse-gram.y (%initial-action): Initialize @$ correctly. + * tests/input.at (Torturing the Scanner): Update output. + + * src/scan-gram.l (scanner_cursor): Declare it static. + +2006-07-07 Joel E. Denny + + In warnings, say "previous declaration" rather than "first + declaration". + * src/symtab.c (redeclaration): Do that here. + * src/reader.c (record_merge_function_type): In the case of a result + type clash, report the previous declaration rather than the very first + one in the grammar file. + * tests/glr-regression.at (Missed %merge type warnings when LHS type is + declared later): Add a third declaration to check this behavior. + * tests/input.at (Incompatible Aliases): Update output. + +2006-06-27 Akim Demaille + + * doc/Doxyfile.in: New. + * doc/Makefile.am: Use it. + * src/lalr.h, src/symtab.h: Initial doxygenation. + +2006-06-26 Joel E. Denny + + Don't miss %merge result type warnings just because the LHS types are + declared after the %merge. This continues the effort of the previous + patch. + * src/reader.c (get_merge_function): Don't set the merger type yet. + (record_merge_function_type): New function for setting the merger type + and checking for clashes. + (grammar_current_rule_merge_set): Set the location of the %merge for + the current rule. + (packgram): Invoke record_merge_function_type for each rule now that + all symbol type declarations have been parsed. + * src/reader.h (merger_list.type_declaration_location): New member + storing the location of the first %merge from which the type for this + merging function was derived. + * src/symlist.h (symbol_list.merger_declaration_location): New member + storing the location of a rule's %merge, if any. + * tests/glr-regression.at (Missed %merge type warnings when LHS type is + declared later): New test to catch the error fixed by the above patch. + +2006-06-26 Joel E. Denny + + Get action warnings (grammar_rule_check) right even when symbol + declarations appear after the rules. Discussed at + + and + . + Don't mistake the type of $$ in a midrule to be that of its parent + rule's $$. + * src/reader.c (grammar_current_rule_end): Don't invoke + grammar_rule_check yet since not all symbol declarations may have been + parsed yet. + (grammar_midrule_action): Likewise. + Don't record whether the midrule's $$ has been used yet since actions + haven't been translated yet. + Record the midrule's parent rule and its RHS index within the parent + rule. + (grammar_current_rule_action_append): Don't translate the action yet + since not all symbol declarations may have been parsed yet and, thus, + warnings about types for $$, $n, @$, and @n can't be reported yet. + (packgram): Translate the action and invoke grammar_rule_check now that + all symbol declarations have been parsed. + * src/scan-code.l (handle_action_dollar): Now that this is invoked + after parsing the entire grammar file, the symbol list here in the case + of a midrule is actually the midrule's empty RHS, so reference its + parent rule's RHS where necessary. + On the other hand, now that you can already know it's a midrule, you + aren't forced to think $$ has the same type as its parent rule's $$. + (handle_action_at): In the case of a midrule, reference the parent rule + where necessary. + * src/symlist.c (symbol_list_new): Initialize new midrule-related + members. + (symbol_list_length): Now that this is invoked after all rules have + been parsed, a NULL symbol (rather than a NULL symbol list node) + terminates a rule. symbol_list_print already does this correctly. + * src/symlist.h (symbol_list.midrule_parent_rule, + symbol_list.midrule_parent_rhs_index): New members so that midrules can + remember their relationships with their parents. + * tests/input.at (Type Clashes): Extend to catch the midrule $$ error + fixed by the above patch. + (_AT_UNUSED_VALUES_DECLARATIONS, AT_CHECK_UNUSED_VALUES): New m4 macros + implementing... + (Unused values): ... this old test case and... + (Unused values before symbol declarations): ... this new test case. + This one is the same as `Unused values' except that all symbol + declarations appear after the rules in order to catch the rest of the + errors fixed by the above patch. + +2006-06-26 Joel E. Denny + + More cleanup. + * src/reader.c (current_rule): Declare it static since it's no longer + used outside this file. + (grammar_current_rule_action_append): Remove redundant arguments from + translate_rule_action invocation. + * src/reader.h (current_rule): Remove this unused extern. + * src/scan-code.h (translate_rule_action): Remove redundant arguments. + * src/scan-code.l (translate_rule_action): Likewise. + +2006-06-25 Joel E. Denny + + Clean up yesterday's patch. + * parse-gram.y (rhs): Move grammar_midrule_action invocation from here + to... + * src/reader.c (grammar_current_rule_action_append): ... here for + consistency with grammar_current_rule_symbol_append. + * tests/regression.at (Braced code in declaration in rules section): + Make yyerror and yylex static as usual. + +2006-06-24 Joel E. Denny + + Fix bug that mistakes braced code in a declaration in the rules section + to be a rule action. Mentioned at + . + * src/scan-gram.l: Move midrule action detection from the start of the + scanning of any braced code to... + * src/parse-gram.y (rhs): ... the parsing of braced code as a rule + action. For readability, use $2 and @2 rather than the equivalent + global variables. + * tests/regression.at (Braced code in declaration in rules section): + New test to catch the error fixed by the above patch. + + Work on code readability some. + * src/scan-code.l (current_rule): Get rid of this misleading and + redundant declaration: it's actually extern'ed in reader.h. + (YY_DECL, code_lex, handle_action_dollar, handle_action_at, + translate_action): Add a rule argument and use it instead of the global + current_rule. + (translate_rule_action): This already receives current_rule through an + argument, so pass it on to translate_action instead of assigning + current_rule to current_rule. + (translate_symbol_action, translate_code): Pass rule = NULL to + translate_action. + +2006-06-23 Joel E. Denny + + Rename %before-definitions to %start-header and %after-definitions to + %end-header. Don't use these declarations to separate pre-prologue + blocks from post-prologue blocks. Add new order-independent + declarations %before-header and %after-header as alternatives to the + traditional Yacc pre-prologue and post-prologue blocks. Discussed at + . + * NEWS (2.3+): Update for these changes. + * data/glr.c (b4_before_definitions): Update to... + (b4_start_header): ... this. + (b4_after_definitions): Update to... + (b4_end_header): ... this. + * data/glr.cc: Likewise. + * data/lalr1.cc: Likewise. + * data/yacc.c: Likewise. + * doc/bison.texinfo (The prologue): Update names, and replace remaining + prologue blocks with %*-header declarations. + (Calc++ Parser): Likewise. + (Bison Declaration Summary): Update names. + (Bison Symbols): Update description. + * src/parse-gram.y (PERCENT_AFTER_DEFINITIONS): Update to... + (PERCENT_END_HEADER): ... this. + (PERCENT_BEFORE_DEFINITIONS): Update to... + (PERCENT_START_HEADER): ... this. + (PERCENT_AFTER_HEADER, PERCENT_BEFORE_HEADER): New tokens. + (declaration): Update token names and m4 macro names. + When parsing %end-header and %start-header, invoke translate_code + before muscle_code_grow, and no longer set global booleans to remember + whether these declarations have been seen. + Parse new %after-header and %before-header. + * src/reader.c (before_definitions, after_definitions): Remove. + (prologue_augment): Accept a new bool argument to specify whether to + augment the pre-prologue or post-prologue. + * src/reader.h (before_definitions, after_definitions): Remove these + extern's. + (prologue_augment): Add new bool argument. + * src/scan-gram.l (PERCENT_AFTER_DEFINITIONS): Update to... + (PERCENT_END_HEADER): ... this. + (PERCENT_BEFORE_DEFINITIONS): Update to... + (PERCENT_START_HEADER): ... this. + (PERCENT_AFTER_HEADER, PERCENT_BEFORE_HEADER): New tokens. + * tests/actions.at (Printers and Destructors): Update names. + +2006-06-22 Joel E. Denny + + Add comparison operators for C++ location classes. Discussed at + . + * data/c++.m4 (b4_define_location_comparison): New boolean %define + declaration indicating whether filename_type has an operator==. If + filename_type is `std::string', it defaults to `1', `0' otherwise. + * data/location.cc: Iff b4_define_location_comparison is `1', add + operator== and operator!= for class position and for class location. + + Some minor fixes. + * src/scan-action.l: Remove unused file. + * src/symtab.c (symbol_printer_set): Use printer_location not + destructor_location. + * src/symtab.h (struct symbol): Replace incorrect source comment for + printer members. + * tests/input.at (Incompatible Aliases): Update output with correct + printer location. + +2006-06-20 Joel E. Denny + + Don't put the pre-prologue in the header file. For the yacc.c code + file and the glr.c header and code files, move the pre-prologue before + the token definitions. Add new %before-definitions and + %after-definitions to declare code that will go in both the header file + and code file. Discussed at + , + , + and + . + * NEWS (2.3+): Describe these changes. + * data/glr.c (b4_pre_prologue): Move from within to before... + (b4_shared_declarations): ... this. + Add new b4_before_definitions before b4_token_enums. + Add new b4_after_definitions at the end. + * data/glr.cc (b4_pre_prologue): Replace with... + (b4_before_definitions): ... this in the header file. + (b4_after_definitions): New near the end of the header file. + * data/lalr1.cc (b4_pre_prologue): Move from the header file to the + code file right before including the header file. + (b4_before_definitions): New in the previous position of + b4_pre_prologue in the header file. + (b4_after_definitions): New near the end of the header file. + * data/yacc.c: Clean up some m4 quoting especially in the header file. + (b4_token_enums_defines): In the code file, move to right before + YYSTYPE for consistency with the header file. + (b4_before_definitions): New right before b4_token_enums_defines in + both the header and code file. + (b4_after_definitions): New right after YYLTYPE and yylloc in both the + header and code file. + * doc/bison.texinfo (Prologue): Show use of %before-definitions instead + of prologues for %union dependencies. + (Bison Declaration Summary): In %defines description, mention the + effect of %before-definitions and %after-definitions on the header + file. + (Calc++ Parser): Forward declare driver in a %before-definitions rather + than in the pre-prologue so that make check succeeds. + (Bison Symbols): Add entries for %before-definitions and + %after-definitions. + * src/parse-gram.y (PERCENT_BEFORE_DEFINITIONS): New token for + %before-definitions. + (PERCENT_AFTER_DEFINITIONS): New token for %after-definitions. + (declaration): Parse those declarations and append to + b4_before_definitions and b4_after_definitions, respectively. + * src/reader.c (before_definitions, after_definitions): New bools to + track whether those declarations have been seen. + (prologue_augment): Add to the post-prologue if %union, + %before-definitions, or %after-definitions has been seen. + * src/reader.h (before_definitions, after_definitions): New extern's. + * src/scan-gram.l: Scan the new declarations. + * tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Place the second + prologue block in a %before-definitions or a %after-definitions based + on whether the %union is declared. + * tests/regression.at (Early token definitions with --yacc, Early token + definitions without --yacc): Move tests for token definitions into the + post-prologue since token names are no longer defined in the + pre-prologue. + +2006-06-20 Akim Demaille + + * src/symtab.h, src/symtab.c (symbol_from_uniqstr): New. + (symbol_get): Use it. + * src/parse-gram.y: Use it. + +2006-06-19 Joel E. Denny + + * src/scan-gram.l: Remove unused declaration of last_string_1 so the + build succeeds when configured with --enable-gcc-warnings. + +2006-06-19 Paul Eggert + + * src/parse-gram.y (char_name): New function. + (CHAR, STRING, string_content): For %printer, properly escape. + (ID): Prefer fputs to fprintf. + (id): Reindent to be consistent with other rules. + Properly quote char. + + The Translation Project changed its way of publishing translations + to maintainers. I haven't received any responses to my request + for supporting the old way, or for documenting the new way. I + have modified 'bootstrap' to use screen scraping + (in this case, HTML scraping). This is unreliable and inelegant, + but I don't see any better way. Yuck. + * bootstrap (TP_URL, WGET_COMMAND): New vars. + (get_translations): New function, which uses HTML scraping to + deduce locations of latest translations. + Use this function to grab both bison and bison-runtime .po files. + Don't bother priming the pump for the runtime-po domain any more, + as it's now translated better than bison is. + +2006-06-19 Akim Demaille + + * src/scan-gram.l: No longer "parse" things after `%union' until + `{'. Rather, return a single "%union" token. + No longer make symbols: return strings, and leave the conversion + to symbols to the parser. + (SC_PRE_CODE, token_type): Remove. + * src/parse-gram.y (%union): New field `character'. + Sort tokens. + (CHAR): New token. + (ID, ID_COLON): Now that the scanner no longer makes them + identifiers, adjust all uses to invoke symbol_get. + (id_colon): New, wraps the conversion from string to symbol. + (%union): Accept a possible union_name. + (symbol): Now can be a char. + * data/c.m4 (b4_union_name): Leave a default value. + * data/glr.c, data/yacc.c: Use it. + +2006-06-11 Joel E. Denny + + For associating token numbers with token names for "yacc.c", don't use + #define statements unless `--yacc' is specified; always use enum + yytokentype. Most important discussions start at: + , + , + and + . + * NEWS (2.3+): Mention. + * data/c.m4 (b4_yacc_if): New. + (b4_token_enums_defines): Use b4_yacc_if to decide whether to add the + token #define's. + * doc/bison.texinfo (Bison Options): Describe the effect of `--yacc' + on token name definitions. + * src/getargs.c (usage): Capitalize `Yacc' in English. + * src/output.c (prepare): Define b4_yacc_flag. + * tests/regression.at (Early token definitions): Test that tokens names + are defined before the pre-prologue not just before the post-prologue. + Remove this test case and copy to... + (Early token definitions with --yacc): ... this to test #define's. + (Early token definitions without --yacc): ... and this to test enums. + +2006-06-11 Paul Eggert + + * NEWS: Reword the post-2.3 change to not be so optimistic about + removing the old "look-ahead" spelling. + Update previous look-ahead/lookahead change reports. + * REFERENCES: look-ahead -> lookahead (since that's + what he actually wrote). + * doc/refcard.tex: look ahead -> lookahead, + look-ahead -> lookahead + +2006-06-09 Joel E. Denny + + For consistency, use `lookahead' instead of `look-ahead' or + `look_ahead'. Discussed starting at + + and then at + . + * NEWS: For the next release, note the change to `--report'. + * TODO, doc/bison.1: Update English. + * doc/bison.texinfo: Update English. + (Understanding Your Parser, Bison Options): Document as + `--report=lookahead' rather than `--report=look-ahead'. + * src/conflicts.c: Update English in comments. + (lookahead_set): Rename from look_ahead_set. + (flush_reduce): Rename argument look_ahead_tokens to lookahead_tokens. + (resolve_sr_conflict): Rename local look_ahead_tokens to + lookahead_tokens, and update other uses. + (flush_shift, set_conflicts, conflicts_solve, count_sr_conflicts, + count_rr_conflicts, conflicts_free): Update uses. + * src/getargs.c (report_args): Move "lookahead" before alternate + spellings. + (report_types): Update uses. + (usage): For `--report' usage description, state `lookahead' spelling + rather than `look-ahead'. + * src/getargs.h (report.report_lookahead_tokens): Rename from + report_look_ahead_tokens. + * src/lalr.c: Update English in comments. + (compute_lookahead_tokens): Rename from compute_look_ahead_tokens. + (state_lookahead_tokens_count): Rename from + state_look_ahead_tokens_count. + Rename local n_look_ahead_tokens to n_lookahead_tokens. + (lookahead_tokens_print): Rename from look_ahead_tokens_print. + Rename local n_look_ahead_tokens to n_lookahead_tokens. + Update other uses. + Update English in output. + (add_lookback_edge, initialize_LA, lalr, lalr_free): Update uses. + * src/print.c: Update English in comments. + (lookahead_set): Rename from look_ahead_set. + (print_reduction): Rename argument lookahead_token from + look_ahead_token. + (print_core, state_default_rule, print_reductions, print_results): + Update uses. + * src/print_graph.c: Update English in comments. + (print_core): Update uses. + * src/state.c: Update English in comments. + (reductions_new): Update uses. + (state_rule_lookahead_tokens_print): Rename from + state_rule_look_ahead_tokens_print, and update other uses. + * src/state.h: Update English in comments. + (reductions.lookahead_tokens): Rename from look_ahead_tokens. + (state_rule_lookahead_tokens_print): Rename from + state_rule_look_ahead_tokens_print. + * src/tables.c: Update English in comments. + (conflict_row, action_row): Update uses. + * tests/glr-regression.at + (Incorrect lookahead during deterministic GLR, + Incorrect lookahead during nondeterministic GLR): Rename + print_look_ahead to print_lookahead. + * tests/torture.at: Update English in comments. + (AT_DATA_LOOKAHEAD_TOKENS_GRAMMAR): Rename from + AT_DATA_LOOK_AHEAD_TOKENS_GRAMMAR. + (Many lookahead tokens): Update uses. + * data/glr.c: Update English in comments. + * lalr1.cc: Likewise. + * yacc.c: Likewise. + * src/conflicts.h: Likewise. + * src/lalr.h: Likewise. + * src/main.c: Likewise. + * src/output.c: Likewise. + * src/parse-gram.c: Likewise. + * src/tables.h: Likewise. + * tests/calc.at: Likewise. + +2006-06-08 Joel E. Denny + + * src/flex-scanner.h (yytext): Remove stray `*/' in #define. + +2006-06-07 Paul Eggert + + * TODO: Add request from Nelson H. F. Beebe to be able to install + Bison without installing the yacc script. + +2006-06-07 Joel E. Denny + + * src/flex-scanner.h: For the sake of Flex 2.5.4, don't #define yyleng + and yytext if they're already #define'd. + * src/flex-scanner.h, src/location.h: Move #include "system.h" to... + * src/scan-code-c.c: ... here. + * src/scan-code.l, src/scan-gram.l: ... and here. Also #include + . + +2006-06-07 Joel E. Denny + + Get Bison to build again when configured with --enable-gcc-warnings. + * src/location.c, src/location.h, src/main.c, src/scan-code.l: Add some + missing #include's. + * src/scan-code.l (handle_action_dollar, handle_action_at): Rename + loc argument as it shadows a global. + * src/scan-gram.l: Remove stray comma that prevents boundary_set + invocation. + + * src/.cvsignore: Add scan-code.c. + +2006-06-07 Akim Demaille + + * src/scan-gram.l: Move the "add a trailing ; to actions" code + to... + * src/scan-code.l: here. + * tests/input.at (Torturing the Scanner): Fix another location + error. + +2006-06-07 Akim Demaille + + * src/Makefile.am (BUILT_SOURCES): Fix the trailing backslash. + +2006-06-06 Akim Demaille + + Extract the parsing of user actions from the grammar scanner. + As a consequence, the relation between the grammar scanner and + parser is much simpler. We can also split "composite tokens" back + into simple tokens. + * src/gram.h (ITEM_NUMBER_MAX, RULE_NUMBER_MAX): New. + * src/scan-gram.l (add_column_width, adjust_location): Move to and + rename as... + * src/location.h, src/location.c (add_column_width) + (location_compute): these. + Fix the column count: the initial column is 0. + (location_print): Be robust to ending column being 0. + * src/location.h (boundary_set): New. + * src/main.c: Adjust to scanner_free being renamed as + gram_scanner_free. + * src/output.c: Include scan-code.h. + * src/parse-gram.y: Include scan-gram.h and scan-code.h. + Use boundary_set. + (PERCENT_DESTRUCTOR, PERCENT_PRINTER, PERCENT_INITIAL_ACTION) + (PERCENT_LEX_PARAM, PERCENT_PARSE_PARAM): Remove the {...} part, + which is now, again, a separate token. + Adjust all dependencies. + Whereever actions with $ and @ are used, use translate_code. + (action): Remove this nonterminal which is now useless. + * src/reader.c: Include assert.h, scan-gram.h and scan-code.h. + (grammar_current_rule_action_append): Use translate_code. + (packgram): Bound check ruleno, itemno, and rule_length. + * src/reader.h (gram_in, gram__flex_debug, scanner_cursor) + (last_string, last_braced_code_loc, max_left_semantic_context) + (scanner_initialize, scanner_free, scanner_last_string_free) + (gram_out, gram_lineno, YY_DECL_): Move to... + * src/scan-gram.h: this new file. + (YY_DECL): Rename as... + (GRAM_DECL): this. + * src/scan-code.h, src/scan-code.l, src/scan-code-c.c: New. + * src/scan-gram.l (gram_get_lineno, gram_get_in, gram_get_out): + (gram_get_leng, gram_get_text, gram_set_lineno, gram_set_in): + (gram_set_out, gram_get_debug, gram_set_debug, gram_lex_destroy): + Move these declarations, and... + (obstack_for_string, STRING_GROW, STRING_FINISH, STRING_FREE): + these to... + * src/flex-scanner.h: this new file. + * src/scan-gram.l (rule_length, rule_length_overflow) + (increment_rule_length): Remove. + (last_braced_code_loc): Rename as... + (gram_last_braced_code_loc): this. + Adjust to the changes of the parser. + Move all the handling of $ and @ into... + * src/scan-code.l: here. + * src/scan-gram.l (handle_dollar, handle_at): Remove. + (handle_action_dollar, handle_action_at): Move to... + * src/scan-code.l: here. + * src/Makefile.am (bison_SOURCES): Add flex-scanner.h, + scan-code.h, scan-code-c.c, scan-gram.h. + (EXTRA_bison_SOURCES): Add scan-code.l. + (BUILT_SOURCES): Add scan-code.c. + (yacc): Be robust to white spaces. + + * tests/conflicts.at, tests/input.at, tests/reduce.at, + * tests/regression.at: Adjust the column numbers. + * tests/regression.at: Adjust the error message. + +2006-06-06 Joel E. Denny + + * src/getargs.c (usage): Mention GLR not just LALR(1) in --help output. + Use Akim's wording from + . + +2006-06-06 Joel E. Denny + + Between Bison releases, manually append `+' to the previous Bison + release number, and use that as a signal to automatically print the + ChangeLog's CVS Id keyword from --version. Discussed starting at + . + * ChangeLog: Add Id header. + * configure.ac (AC_INIT): Append `+' to `2.3'. + * src/.cvsignore: Add revision.c. + * src/Makefile.am (bison_SOURCES): Add revision.c and revision.h. + (BUILT_SOURCES): Add revision.c. + (revision.c): New target rule. This file defines a new global variable + named revision. It initializes it with either the Id from ChangeLog + or, if VERSION doesn't contain `+', with the empty string. + * src/getargs.c (version): Print the value of revision. + * src/revision.h: Extern revision. + +2006-06-05 Paul Eggert + + * NEWS: Version 2.3. + * configure.ac (AC_INIT): Likewise. + +2006-05-30 Paul Eggert + + * data/glr.c (YYRECOVERING): Define to be a function-like macro + with no arguments, not as an object-like macro. This is for + compatibility with data/yacc.c. Problem reported by John P. Hartmann in + . + * doc/bison.texinfo (Action Features, Error Recovery, Table of Symbols): + Document this. + +2006-05-30 Joel E. Denny + + * src/getargs.c (usage): Back out yesterday's modification of the + --help output so that we don't have to wait for translation before + releasing 2.3. + +2006-05-29 Paul Eggert + + * doc/bison.texinfo (Introduction): Don't say "GLR grammar". + Problem reported by Akim Demaille. + +2006-05-29 Joel E. Denny + + * src/getargs.c (usage): Mention GLR not just LALR(1) in --help output. + +2006-05-26 Paul Eggert + + * data/yacc.c (yy_reduce_print): Omit trailing white space in + generated source code. Problem reported by Frans Englich in + . + +2006-05-22 Paul Eggert + + * Makefile.maint (gzip_rsyncable, GZIP_ENV): Compute within the + shell, not within 'make', so that 'make' by an ordinary builder + (using GNU make) does not worry about configuring gzip. This also + works around a bug reported independently by Keith Thompson and by + Georg Schwarz, whereby gzip 1.2.4 --help would output usage on + stderr rather than stdout, messing up the build logs. + +2006-05-21 Joel E. Denny + + * data/yacc.c (yyparse): Wrap the final return from yyparse inside YYID + to make sure that YYID will never be unused. This fixes a 'make + maintainer-check' failure caused by the recent changes to the 'Trivial + grammars' test case, which caused g++ 4.1.0 to complain that YYID was + not used. + * data/glr.c (yyparse): Wrap yyparse's return inside YYID just in case. + +2006-05-21 Joel E. Denny + + * data/glr.c (yyresolveLocations): Remove bogus YYASSERT that the + state before an empty RHS is always resolved here. Only the location + of that state is guaranteed to be resolved, and that's enough. This + fixes the remaining bug reported by Derek M. Jones in + . + * tests/glr-regression.at (Uninitialized location when reporting + ambiguity): Test the above case. + Also, the embedded comments in this test case claim it checks the case + of an empty RHS that has inherited the initial location. However, the + corresponding LHS was already resolved, so yyresolveLocations didn't + actually have reason to modify it. Fix this by forcing + nondeterministic operation at the beginning of the parse. + +2006-05-20 Paul Eggert + + * data/c.m4 (b4_yy_symbol_print_generate): + (b4_yy_symbol_print_generate): Use 'YYSTYPE const' rather than + 'const YYSTYPE', and similarly for YYLTYPE. This fixes one + of the bugs reported today by Derek M Jones in + . + * doc/bison.texinfo (Value Type): Document that YYSTYPE must be + defined to be a type name without parens or brackets. + (Location Type): Similarly for YYLTYPE. + * tests/regression.at (Trivial grammars): Put in a test for this + bug that will be caught by 'make maintainer-check' (though not, + alas, by 'make check' unless your compiler is picky). + +2006-05-19 Paul Eggert + + * NEWS: Version 2.2. + * configure.ac (AC_INIT): Likewise. + +2006-05-17 Joel E. Denny + + * data/glr.c (yyreportTree): Make room in yystates for the state + preceding the RHS. This fixes the segmentation fault reported by Derek + M. Jones in + . + (yyreportTree, yypdumpstack): Subtract 1 from yyrule before printing + to the user. Reported for yyreportTree by Derek M. Jones later in the + same thread. + * THANKS: Add Derek M. Jones. + Update my email address. + Fix typo in Steve Murphy's name. + +2006-05-14 Paul Eggert + + * data/glr.c (yyreportSyntaxError): Fix off-by-one error in + checking against YYLAST that caused the parser to miss a potential + alternative in its diagnostic. + Problem reported by Maria Jose Moron Fernandez in + . + * data/lalr1.cc (yysyntax_error_): Likewise. + * data/yacc.c (yysyntax_error): Likewise. + * tests/regression.at (_AT_DATA_DANCER_Y): Use static array for + tokens, in case we run into an older C compiler. + (_AT_DATA_EXPECT2_Y, AT_CHECK_EXPECT2): New macros. + Use them to check for the off-by-one error fixed above. + + * data/yacc.c (yytnamerr): Fix typo: local var should be of type + YYSIZE_T, not size_t. + * tests/regression.at (Trivial grammars): New test, to catch + the error fixed by the above patch. + +2006-05-14 Akim Demaille + + * doc/bison.texinfo (C++ Bison Interface): Clarify the naming + scheme. + Reported by Steve Murphy. + +2006-05-14 Akim Demaille + + * data/glr.cc, data/lalr1.cc: Using %defines is mandatory. + * data/glr.cc: b4_location_flag is now b4_locations_flag. + +2006-05-14 Akim Demaille + + Implement --trace=m4. + * src/getargs.c (trace_types, trace_args): Accept trace_m4. + * src/output.c (output_skeleton): When set, pass -dV to m4. + + Factor the handling of flags in m4. + * src/output.c (prepare): Rename the muscle names debug, defines, + error_verbose to debug_flag, defines_flag, error_verbose_flag. + * data/c.m4: Adjust. + (_b4_define_flag_if, b4_define_flag_if, b4_defines_if): New. + Use b4_define_flag_if to define other b4_FLAG_if macros. + (b4_location_if): As a consequence, rename as... + (b4_locations_if): this, for consistency. + Adjust all the skeletons. + +2006-05-14 Akim Demaille + + * etc/bench.pm: Shorten bench names. + +2006-05-14 Akim Demaille + + * src/output.h, src/output.c (error_verbose): Move to... + * src/getargs.h, src/getargs.c: here. + Sort the flags. + Adjust dependencies. + +2006-05-13 Paul Eggert + + * data/c.m4 (b4_copyright): Put the special exception for Bison + skeletons here, so we don't have to put it in each skeleton. All + uses changed. Suggested by Akim Demaille. Also, wrap the + copyright notice, in case it is longer than 80 columns. Replace + comma by newline after title. + +2006-05-11 Paul Eggert + + * doc/bison.texinfo (Calc++ Scanner): The flex behavior is an + incompatibility, not a bug. Mention that it wasn't fixed as of + flex 2.5.33. + +2006-05-11 Akim Demaille + + * examples/extexi: Enforce the precedence of concatenation over + >>. + Reported by Tommy Nordgren. + +2006-05-11 Akim Demaille + + * data/lalr1.cc (yytranslate_): Rename token as t to avoid clashes + with the member "token". + Reported by Martin Nylin. + +2006-05-08 Paul Eggert + + * data/glr.c: Switch to Bison 2.2 special-exception language in + the copyright notice. Use more-regular format for titles and + copyright notices. + * data/glr.cc: Likewise. + * data/location.cc: Likewise. + * data/yacc.cc: Likewise. + * doc/bison.texinfo (Conditions): Document this. + * NEWS: likewise. Upgrade version to 2.2. + +2006-04-27 Akim Demaille + + * data/glr.cc: Remove dead code. + +2006-04-25 Paul Eggert + + * bootstrap: Comment out the AM_CPPFLAGS line, since we don't use + that variable and the line breaks the bootstrap. Problem reported + by Juan M. Guerrero. + +2006-04-24 Akim Demaille + + * doc/bison.texinfo (Multiple start-symbols): New. + +2006-04-24 Akim Demaille + + * etc/README, etc/bench.pl: New. + +2006-04-03 Akim Demaille + + * src/scan-gram.l: Be robust to BRACED_CODE appearing before any + rule. + Reported by Mickael Labau. + * tests/input.at (Torturing the Scanner): Test it. + +2006-03-16 Paul Eggert + + * doc/bison.texinfo (Decl Summary): Don't mention yylloc twice. + Problem reported by Bob Rossi. + +2006-03-13 Paul Eggert + + * doc/bison.texinfo: Remove @shorttitlepage stuff; it wasn't used + and didn't really work. + For the index, use @ifnotinfo, not @iftex. + Minor cleanups of spacing and terminology. + +2006-03-12 Akim Demaille + + * tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Fix the definition + of AT_NAME_PREFIX when %name-prefix is not used. + +2006-03-12 Akim Demaille + + Apply --prefix to C++ skeletons too: they change the namespace. + The test suite already exercize these cases. + * data/c++.m4 (b4_namespace): New. + * data/lalr1.cc, data/glr.cc, data/location.cc: Use it instead of `yy'. + * data/lalr1.cc (yytnameerr_): Move its definition into the namespace. + * data/yacc.c, data/glr.c: Remove a useless `[]'. + * doc/bison.texinfo: Document it. + (Option Cross Key): Use @multitable in all formats. It looks + nicer, even in TeX outputs. + (Rules): Use the same code whatever the output type is. + * tests/local.at (_AT_BISON_OPTION_PUSHDEFS) + (_AT_BISON_OPTION_POPDEFS): Support AT_NAME_PREFIX. + * tests/calc.at: Use it, instead of hard coding `yy'. + +2006-03-10 Akim Demaille + + * TODO: Remove dead items. + +2006-03-10 Akim Demaille + + * doc/FAQ: Remove, merged into... + * doc/bison.texinfo (FAQ): this. + * doc/Makefile.am (EXTRA_DIST): Adjust. + +2006-03-10 Akim Demaille + + * data/c.m4 (b4_token_enum): Always define the enum of tokens, + even if empty. + * data/lalrl1.cc, data/glr.cc (parser::token_type): New. + * doc/bison.texinfo (Calc++ Scanner): Use it. + +2006-03-09 Paul Eggert + + Fix two nits reported by twlevo, plus one more that I discovered. + + * src/assoc.h (assoc_to_string): Give a name to the arg, as + this is the usual Bison style. + * src/location.h (location_print): Likewise. + + * src/reader.h (token_name): Likewise. + +2006-03-08 Paul Eggert + + Fix some nits reported by twlevo. + * doc/FAQ: Remove ancient Y2K FAQ, replacing it with "secure" + and "POSIX". Use more-modern syntax for URLs. Mention C++ + and ask for Java. Don't hardwire OS version numbers. Add + copyright notice. + * m4/.cvsignore: Add unistd_h.m4, for latest gnulib. + * src/conflicts.c (solved_conflicts_obstack): Now static. + +2006-03-08 Joel E. Denny + + * doc/bison.texinfo (Introduction): Mention GLR and C++ as on the web + page. Say "you can use it" not "you may use it" as on the web page; + we're describing capabilities not granting permission. + +2006-03-06 Paul Eggert + + * data/glr.c (yyresolveLocations): Rename local variables to avoid + shadowing warnings. Use usual patter for iterating through RHS. + * tests/glr-regression.at + (Uninitialized location when reporting ambiguity): + Modify yylex so that it uses its argument, rather than trying + to rely on ARGSUSED (which doesn't work for gcc with warnings). + const char -> char const. + + * tests/Makefile.am ($(srcdir)/package.m4, maintainer-check-valgrind): + Don't use tabs inside commands; it messes up 'ps'. + Problem reported by twlevo. + +2006-03-06 Joel E. Denny + + * tests/glr-regression.at (Uninitialized location when reporting + ambiguity): New test case. + * data/glr.c (yyresolveLocations): New function, which uses + YYLLOC_DEFAULT. + (yyresolveValue): Invoke yyresolveLocations before reporting an + ambiguity. + * doc/bison.texinfo (Default Action for Locations): Note + YYLLOC_DEFAULT's usage for ambiguity locations. + (GLR Semantic Actions): Cross-reference those notes. + +2006-03-04 Joel E. Denny + + * tests/glr-regression.at (Leaked semantic values when reporting + ambiguity): Remove unnecessary union and type declarations. + (Leaked lookahead after nondeterministic parse syntax error): New test + case. + * data/glr.c (yyparse): Check for zero stacks remaining before + attempting to shift the lookahead so that you don't lose it. + +2006-03-02 Joel E. Denny + + Avoid memory leaks by not invoking longjmp in yyreportAmbiguity. + * tests/glr-regression.at (Leaked semantic values when reporting + ambiguity): New test case. + * data/glr.c (yyreportAmbiguity): Invoke yyyerror directly and return + yyabort rather than invoking yyFail, which invokes longjmp. Remove the + now unnecessary yystackp parameter. + (yyresolveValue): Return yyreportAmbiguity's result. Now the necessary + destructors can be called. + + * tests/glr-regression.at: Don't invoke bison with `-t' unnecessarily + in existing testcases. + +2006-03-02 Joel E. Denny + + Don't leak semantic values for parent RHS when a user action cuts the + parser, and clean up related code a bit. + * tests/glr-regression.at (Leaked merged semantic value if user action + cuts parse): Rename to... + (Leaked semantic values if user action cuts parse): ... this. Add check + for leaked parent RHS values. + * data/glr.c (yydestroyGLRState): In debugging output, distinguish + between an unresolved state (non-empty chain of semantic options) and + an incomplete one (signaled by an empty chain). + (yyresolveStates): Document the interface. Move all manipulation of a + successfully or unsuccessfully resolved yyGLRState to... + (yyresolveValue): ... here so that yyresolveValue always leaves a + yyGLRState with consistent data and thus is easier to understand. + Remove the yyvalp and yylocp parameters since they are always just + taken from the yys parameter. When reporting a discarded merged value + in debugging output, note that it is incompletely merged. Document the + interface. + (yyresolveAction): If resolving any of the RHS states fails, destroy + them all rather than leaking them. Thus, as long as user actions are + written to clean up the RHS correctly, yyresolveAction always cleans up + the RHS of a semantic option. Document the interface. + +2006-02-27 Paul Eggert + + * data/glr.c (yyexpandGLRStack): Catch an off-by-one error that + led to a segmentation fault in GNU Pascal. Problem reported + by Waldek Hebisch. + +2006-02-21 Joel E. Denny + + * doc/bison.texinfo (Mid-Rule Actions): Explain how to bury a + mid-rule action inside a nonterminal symbol in order to declare a + destructor for its semantic value. + 2006-02-16 Paul Eggert * data/yacc.c [(! defined yyoverflow || YYERROR_VERBOSE) && ! @@ -2996,7 +4717,7 @@ * data/lalr1.cc (symprint_): Use cdebug_ to avoid warnings. -2004-10-28 Akim Demaille , +2004-11-17 Akim Demaille , Alexandre Duret-Lutz * data/lalr1.cc (Parser::yycdebug_): New, a pointer, to allow @@ -15652,3 +17373,5 @@ Copying and distribution of this file, with or without modification, are permitted provided the copyright notice and this notice are preserved. + +$Id$