X-Git-Url: https://git.saurik.com/bison.git/blobdiff_plain/e4e1a4dcb41f3c2b47ffb7668eac97900b1498f9..1ce5149ac8ffb10e03301661ac3abcc39de31702:/doc/bison.texinfo?ds=sidebyside diff --git a/doc/bison.texinfo b/doc/bison.texinfo index 7c0b3454..0d3ce7d5 100644 --- a/doc/bison.texinfo +++ b/doc/bison.texinfo @@ -5,9 +5,7 @@ @settitle Bison @value{VERSION} @setchapternewpage odd -@iftex @finalout -@end iftex @c SMALL BOOK version @c This edition has been formatted so that you can format and print it in @@ -23,6 +21,7 @@ @c Check COPYRIGHT dates. should be updated in the titlepage, ifinfo @c titlepage; should NOT be changed in the GPL. --mew +@c FIXME: I don't understand this `iftex'. Obsolete? --akim. @iftex @syncodeindex fn cp @syncodeindex vr cp @@ -47,7 +46,7 @@ END-INFO-DIR-ENTRY This file documents the Bison parser generator. Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1995, 1998, 1999, -2000, 2001 +2000, 2001, 2002 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of @@ -89,7 +88,7 @@ instead of in the original English. @page @vskip 0pt plus 1filll Copyright @copyright{} 1988, 1989, 1990, 1991, 1992, 1993, 1995, 1998, -1999, 2000, 2001 +1999, 2000, 2001, 2002 Free Software Foundation, Inc. @sp 2 @@ -154,7 +153,7 @@ Reference sections: * Error Recovery:: Writing rules for error recovery. * Context Dependency:: What to do if your language syntax is too messy for Bison to handle straightforwardly. -* Debugging:: Debugging Bison parsers that parse wrong. +* Debugging:: Understanding or debugging Bison parsers. * Invocation:: How to run Bison (to produce the parser source file). * Table of Symbols:: All the keywords of the Bison language are explained. * Glossary:: Basic concepts are explained. @@ -299,6 +298,11 @@ Handling Context Dependencies * Tie-in Recovery:: Lexical tie-ins have implications for how error recovery rules must be written. +Understanding or Debugging Your Parser + +* Understanding:: Understanding the structure of your parser. +* Tracing:: Tracing the execution of your parser. + Invoking Bison * Bison Options:: All the options described in detail, @@ -433,7 +437,7 @@ smaller constructs according to grammatical rules are called @dfn{nonterminal symbols}; those which can't be subdivided are called @dfn{terminal symbols} or @dfn{token types}. We call a piece of input corresponding to a single terminal symbol a @dfn{token}, and a piece -corresponding to a single nonterminal symbol a @dfn{grouping}.@refill +corresponding to a single nonterminal symbol a @dfn{grouping}. We can use the C language as an example of what symbols, terminal and nonterminal, mean. The tokens of C are identifiers, constants (numeric and @@ -565,7 +569,7 @@ if a rule mentions the terminal symbol `integer constant', it means that @emph{any} integer constant is grammatically valid in that position. The precise value of the constant is irrelevant to how to parse the input: if @samp{x+4} is grammatical then @samp{x+1} or @samp{x+3989} is equally -grammatical.@refill +grammatical. But the precise value is very important for what the input means once it is parsed. A compiler is useless if it fails to distinguish between 4, 1 and @@ -577,7 +581,7 @@ The token type is a terminal symbol defined in the grammar, such as @code{INTEGER}, @code{IDENTIFIER} or @code{','}. It tells everything you need to know to decide where the token may validly appear and how to group it with other tokens. The grammar rules know nothing about tokens -except their types.@refill +except their types. The semantic value has all the rest of the information about the meaning of the token, such as the value of an integer, or the name of an @@ -707,9 +711,9 @@ In some cases the Bison parser file includes system headers, and in those cases your code should respect the identifiers reserved by those headers. On some non-@sc{gnu} hosts, @code{}, @code{}, and @code{} are included as needed to -declare memory allocators and related types. -Other system headers may be included if you define @code{YYDEBUG} to a -nonzero value (@pxref{Debugging, ,Debugging Your Parser}). +declare memory allocators and related types. Other system headers may +be included if you define @code{YYDEBUG} to a nonzero value +(@pxref{Tracing, ,Tracing Your Parser}). @node Stages @section Stages in Using Bison @@ -766,7 +770,7 @@ general form of a Bison grammar file is as follows: @example %@{ -@var{Prologue (declarations)} +@var{Prologue} %@} @var{Bison declarations} @@ -774,7 +778,7 @@ general form of a Bison grammar file is as follows: %% @var{Grammar rules} %% -@var{Epilogue (additional code)} +@var{Epilogue} @end example @noindent @@ -1083,7 +1087,7 @@ The return value of the lexical analyzer function is a numeric code which represents a token type. The same text used in Bison rules to stand for this token type is also a C expression for the numeric code for the type. This works in two ways. If the token type is a character literal, then its -numeric code is the ASCII code for that character; you can use the same +numeric code is that of the character; you can use the same character literal in the lexical analyzer to express the number. If the token type is an identifier, that identifier is defined by Bison as a C macro whose definition is the appropriate number. In this example, @@ -1104,8 +1108,8 @@ Here is the code for the lexical analyzer: @example @group /* Lexical analyzer returns a double floating point - number on the stack and the token NUM, or the ASCII - character read if not a number. Skips all blanks + number on the stack and the token NUM, or the numeric code + of the character read if not a number. Skips all blanks and tabs, returns 0 for EOF. */ #include @@ -1382,7 +1386,7 @@ upon to print its message as well.) The action executes the statement @code{yyerrok}, a macro defined automatically by Bison; its meaning is that error recovery is complete (@pxref{Error Recovery}). Note the difference between @code{yyerrok} and @code{yyerror}; neither one is a -misprint.@refill +misprint. This form of error recovery deals with syntax errors. There are other kinds of errors; for example, division by zero, which raises an exception @@ -1881,7 +1885,7 @@ the name appears in the table, a pointer to its location and its type (@code{VAR} or @code{FNCT}) is returned to @code{yyparse}. If it is not already in the table, then it is installed as a @code{VAR} using @code{putsym}. Again, a pointer and its type (which must be @code{VAR}) is -returned to @code{yyparse}.@refill +returned to @code{yyparse}. No change is needed in the handling of numeric values and arithmetic operators in @code{yylex}. @@ -2043,7 +2047,7 @@ Comments enclosed in @samp{/* @dots{} */} may appear in any of the sections. @cindex Prologue @cindex declarations -The @var{prologue} section contains macro definitions and +The @var{Prologue} section contains macro definitions and declarations of functions and variables that are used in the actions in the grammar rules. These are copied to the beginning of the parser file so that they precede the definition of @code{yyparse}. You can use @@ -2051,6 +2055,33 @@ that they precede the definition of @code{yyparse}. You can use need any C declarations, you may omit the @samp{%@{} and @samp{%@}} delimiters that bracket this section. +You may have more than one @var{Prologue} section, intermixed with the +@var{Bison declarations}. This allows you to have C and Bison +declarations that refer to each other. For example, the @code{%union} +declaration may use types defined in a header file, and you may wish to +prototype functions that take arguments of type @code{YYSTYPE}. This +can be done with two @var{Prologue} blocks, one before and one after the +@code{%union} declaration. + +@smallexample +%@{ +#include +#include "ptypes.h" +%@} + +%union @{ + long n; + tree t; /* @r{@code{tree} is defined in @file{ptypes.h}.} */ +@} + +%@{ +static void yyprint(FILE *, int, YYSTYPE); +#define YYPRINT(F, N, L) yyprint(F, N, L) +%@} + +@dots{} +@end smallexample + @node Bison Declarations @subsection The Bison Declarations Section @cindex Bison declarations (introduction) @@ -2079,8 +2110,8 @@ if it is the first thing in the file. @cindex epilogue @cindex C code, section for additional -The @var{epilogue} is copied verbatim to the end of the parser file, just as -the @var{prologue} is copied to the beginning. This is the most convenient +The @var{Epilogue} is copied verbatim to the end of the parser file, just as +the @var{Prologue} is copied to the beginning. This is the most convenient place to put anything that you want to have in the parser file but which need not come before the definition of @code{yyparse}. For example, the definitions of @code{yylex} and @code{yyerror} often go here. @@ -2148,7 +2179,7 @@ your program will confuse other readers. All the usual escape sequences used in character literals in C can be used in Bison as well, but you must not use the null character as a -character literal because its ASCII code, zero, is the code @code{yylex} +character literal because its numeric code, zero, is the code @code{yylex} returns for end-of-input (@pxref{Calling Convention, ,Calling Convention for @code{yylex}}). @@ -2189,7 +2220,7 @@ on when the parser function returns that symbol. The value returned by @code{yylex} is always one of the terminal symbols (or 0 for end-of-input). Whichever way you write the token type in the grammar rules, you write it the same way in the definition of @code{yylex}. -The numeric code for a character token type is simply the ASCII code for +The numeric code for a character token type is simply the numeric code of the character, so @code{yylex} can use the identical character constant to generate the requisite code. Each named token type becomes a C macro in the parser file, so @code{yylex} can use the name to stand for the code. @@ -2202,9 +2233,25 @@ option when you run Bison, so that it will write these macro definitions into a separate header file @file{@var{name}.tab.h} which you can include in the other source files that need it. @xref{Invocation, ,Invoking Bison}. +The @code{yylex} function must use the same character set and encoding +that was used by Bison. For example, if you run Bison in an +@sc{ascii} environment, but then compile and run the resulting program +in an environment that uses an incompatible character set like +@sc{ebcdic}, the resulting program will probably not work because the +tables generated by Bison will assume @sc{ascii} numeric values for +character tokens. Portable grammars should avoid non-@sc{ascii} +character tokens, as implementations in practice often use different +and incompatible extensions in this area. However, it is standard +practice for software distributions to contain C source files that +were generated by Bison in an @sc{ascii} environment, so installers on +platforms that are incompatible with @sc{ascii} must rebuild those +files before compiling them. + The symbol @code{error} is a terminal symbol reserved for error recovery (@pxref{Error Recovery}); you shouldn't use it for any other purpose. -In particular, @code{yylex} should never return this value. +In particular, @code{yylex} should never return this value. The default +value of the error token is 256, unless you explicitly assigned 256 to +one of your tokens with a @code{%token} declaration. @node Rules @section Syntax of Grammar Rules @@ -2335,14 +2382,14 @@ expseq1: exp @end example @noindent -Any kind of sequence can be defined using either left recursion or -right recursion, but you should always use left recursion, because it -can parse a sequence of any number of elements with bounded stack -space. Right recursion uses up space on the Bison stack in proportion -to the number of elements in the sequence, because all the elements -must be shifted onto the stack before the rule can be applied even -once. @xref{Algorithm, ,The Bison Parser Algorithm }, for -further explanation of this. +Any kind of sequence can be defined using either left recursion or right +recursion, but you should always use left recursion, because it can +parse a sequence of any number of elements with bounded stack space. +Right recursion uses up space on the Bison stack in proportion to the +number of elements in the sequence, because all the elements must be +shifted onto the stack before the rule can be applied even once. +@xref{Algorithm, ,The Bison Parser Algorithm}, for further explanation +of this. @cindex mutual recursion @dfn{Indirect} or @dfn{mutual} recursion occurs when the result of the @@ -2485,7 +2532,19 @@ which are the first and third symbols on the right hand side of the rule. The sum is stored into @code{$$} so that it becomes the semantic value of the addition-expression just recognized by the rule. If there were a useful semantic value associated with the @samp{+} token, it could be -referred to as @code{$2}.@refill +referred to as @code{$2}. + +Note that the vertical-bar character @samp{|} is really a rule +separator, and actions are attached to a single rule. This is a +difference with tools like Flex, for which @samp{|} stands for either +``or'', or ``the same action as that of the next rule''. In the +following example, the action is triggered only when @samp{b} is found: + +@example +@group +a-or-b: 'a'|'b' @{ a_or_b_found = 1; @}; +@end group +@end example @cindex default action If you don't specify an action for a rule, Bison supplies a default: @@ -2531,7 +2590,7 @@ If you have used @code{%union} to specify a variety of data types, then you must declare a choice among these types for each terminal or nonterminal symbol that can have a semantic value. Then each time you use @code{$$} or @code{$@var{n}}, its data type is determined by which symbol it refers to -in the rule. In this example,@refill +in the rule. In this example, @example @group @@ -2545,7 +2604,7 @@ exp: @dots{} @code{$1} and @code{$3} refer to instances of @code{exp}, so they all have the data type declared for the nonterminal symbol @code{exp}. If @code{$2} were used, it would have the data type declared for the -terminal symbol @code{'+'}, whatever that might be.@refill +terminal symbol @code{'+'}, whatever that might be. Alternatively, you can specify the data type when you refer to the value, by inserting @samp{<@var{type}>} after the @samp{$} at the beginning of the @@ -2858,9 +2917,11 @@ By default, it is defined this way: @example @group -#define YYLLOC_DEFAULT(Current, Rhs, N) \ - Current.last_line = Rhs[N].last_line; \ - Current.last_column = Rhs[N].last_column; +#define YYLLOC_DEFAULT(Current, Rhs, N) \ + Current.first_line = Rhs[1].first_line; \ + Current.first_column = Rhs[1].first_column; \ + Current.last_line = Rhs[N].last_line; \ + Current.last_column = Rhs[N].last_column; @end group @end example @@ -2872,12 +2933,8 @@ All arguments are free of side-effects. However, only the first one (the result) should be modified by @code{YYLLOC_DEFAULT}. @item -Before @code{YYLLOC_DEFAULT} is executed, the output parser sets @code{@@$} -to @code{@@1}. - -@item -For consistency with semantic actions, valid indexes for the location array -range from 1 to @var{n}. +For consistency with semantic actions, valid indexes for the location +array range from 1 to @var{n}. @end itemize @node Declarations @@ -2942,7 +2999,7 @@ an integer value in the field immediately following the token name: @noindent It is generally best, however, to let Bison choose the numeric codes for all token types. Bison will automatically select codes that don't conflict -with each other or with ASCII characters. +with each other or with normal characters. In the event that the stack type is a union, you must augment the @code{%token} or other token declaration to include the data type @@ -3250,7 +3307,7 @@ directives: @item %debug In the parser file, define the macro @code{YYDEBUG} to 1 if it is not already defined, so that the debugging facilities are compiled. -@xref{Debugging, ,Debugging Your Parser}. +@xref{Tracing, ,Tracing Your Parser}. @item %defines Write an extra output file containing macro definitions for the token @@ -3258,12 +3315,12 @@ type names defined in the grammar and the semantic value type @code{YYSTYPE}, as well as a few @code{extern} variable declarations. If the parser output file is named @file{@var{name}.c} then this file -is named @file{@var{name}.h}.@refill +is named @file{@var{name}.h}. This output file is essential if you wish to put the definition of @code{yylex} in a separate source file, because @code{yylex} needs to be able to refer to token type codes and the variable -@code{yylval}. @xref{Token Values, ,Semantic Values of Tokens}.@refill +@code{yylval}. @xref{Token Values, ,Semantic Values of Tokens}. @item %file-prefix="@var{prefix}" Specify a prefix to use for all Bison output file names. The names are @@ -3360,17 +3417,10 @@ The number of parser states (@pxref{Parser States}). @item %verbose Write an extra output file containing verbose descriptions of the parser states and what is done for each type of look-ahead token in -that state. - -This file also describes all the conflicts, both those resolved by -operator precedence and the unresolved ones. +that state. @xref{Understanding, , Understanding Your Parser}, for more +information. -The file's name is made by removing @samp{.tab.c} or @samp{.c} from -the parser output file name, and adding @samp{.output} instead.@refill -Therefore, if the input file is @file{foo.y}, then the parser file is -called @file{foo.tab.c} by default. As a consequence, the verbose -output file is called @file{foo.output}.@refill @item %yacc Pretend the option @option{--yacc} was given, i.e., imitate Yacc, @@ -3476,7 +3526,7 @@ need to arrange for the token-type macro definitions to be available there. To do this, use the @samp{-d} option when you run Bison, so that it will write these macro definitions into a separate header file @file{@var{name}.tab.h} which you can include in the other source files -that need it. @xref{Invocation, ,Invoking Bison}.@refill +that need it. @xref{Invocation, ,Invoking Bison}. @menu * Calling Convention:: How @code{yyparse} calls @code{yylex}. @@ -3826,7 +3876,7 @@ Types of Values in Actions}. @item $<@var{typealt}>@var{n} Like @code{$@var{n}} but specifies alternative @var{typealt} in the union specified by the @code{%union} declaration. -@xref{Action Types, ,Data Types of Values in Actions}.@refill +@xref{Action Types, ,Data Types of Values in Actions}. @item YYABORT; Return immediately from @code{yyparse}, indicating failure. @@ -4284,7 +4334,7 @@ The Bison precedence declarations, @code{%left}, @code{%right} and @code{%nonassoc}, can only be used once for a given token; so a token has only one precedence declared in this way. For context-dependent precedence, you need to use an additional mechanism: the @code{%prec} -modifier for rules.@refill +modifier for rules. The @code{%prec} modifier declares the precedence of a particular rule by specifying a terminal symbol whose precedence should be used for that rule. @@ -4928,9 +4978,414 @@ make sure your error recovery rules are not of this kind. Each rule must be such that you can be sure that it always will, or always won't, have to clear the flag. +@c ================================================== Debugging Your Parser + @node Debugging @chapter Debugging Your Parser -@findex YYDEBUG + +Developing a parser can be a challenge, especially if you don't +understand the algorithm (@pxref{Algorithm, ,The Bison Parser +Algorithm}). Even so, sometimes a detailed description of the automaton +can help (@pxref{Understanding, , Understanding Your Parser}), or +tracing the execution of the parser can give some insight on why it +behaves improperly (@pxref{Tracing, , Tracing Your Parser}). + +@menu +* Understanding:: Understanding the structure of your parser. +* Tracing:: Tracing the execution of your parser. +@end menu + +@node Understanding +@section Understanding Your Parser + +As documented elsewhere (@pxref{Algorithm, ,The Bison Parser Algorithm}) +Bison parsers are @dfn{shift/reduce automata}. In some cases (much more +frequent than one would hope), looking at this automaton is required to +tune or simply fix a parser. Bison provides two different +representation of it, either textually or graphically (as a @sc{vcg} +file). + +The textual file is generated when the options @option{--report} or +@option{--verbose} are specified, see @xref{Invocation, , Invoking +Bison}. Its name is made by removing @samp{.tab.c} or @samp{.c} from +the parser output file name, and adding @samp{.output} instead. +Therefore, if the input file is @file{foo.y}, then the parser file is +called @file{foo.tab.c} by default. As a consequence, the verbose +output file is called @file{foo.output}. + +The following grammar file, @file{calc.y}, will be used in the sequel: + +@example +%token NUM STR +%left '+' '-' +%left '*' +%% +exp: exp '+' exp + | exp '-' exp + | exp '*' exp + | exp '/' exp + | NUM + ; +useless: STR; +%% +@end example + +@command{bison} reports that @samp{calc.y contains 1 useless nonterminal +and 1 useless rule} and that @samp{calc.y contains 7 shift/reduce +conflicts}. When given @option{--report=state}, in addition to +@file{calc.tab.c}, it creates a file @file{calc.output} with contents +detailed below. The order of the output and the exact presentation +might vary, but the interpretation is the same. + +The first section includes details on conflicts that were solved thanks +to precedence and/or associativity: + +@example +Conflict in state 8 between rule 2 and token '+' resolved as reduce. +Conflict in state 8 between rule 2 and token '-' resolved as reduce. +Conflict in state 8 between rule 2 and token '*' resolved as shift. +@exdent @dots{} +@end example + +@noindent +The next section lists states that still have conflicts. + +@example +State 8 contains 1 shift/reduce conflict. +State 9 contains 1 shift/reduce conflict. +State 10 contains 1 shift/reduce conflict. +State 11 contains 4 shift/reduce conflicts. +@end example + +@noindent +@cindex token, useless +@cindex useless token +@cindex nonterminal, useless +@cindex useless nonterminal +@cindex rule, useless +@cindex useless rule +The next section reports useless tokens, nonterminal and rules. Useless +nonterminals and rules are removed in order to produce a smaller parser, +but useless tokens are preserved, since they might be used by the +scanner (note the difference between ``useless'' and ``not used'' +below): + +@example +Useless nonterminals: + useless + +Terminals which are not used: + STR + +Useless rules: +#6 useless: STR; +@end example + +@noindent +The next section reproduces the exact grammar that Bison used: + +@example +Grammar + + Number, Line, Rule + 0 5 $axiom -> exp $ + 1 5 exp -> exp '+' exp + 2 6 exp -> exp '-' exp + 3 7 exp -> exp '*' exp + 4 8 exp -> exp '/' exp + 5 9 exp -> NUM +@end example + +@noindent +and reports the uses of the symbols: + +@example +Terminals, with rules where they appear + +$ (0) 0 +'*' (42) 3 +'+' (43) 1 +'-' (45) 2 +'/' (47) 4 +error (256) +NUM (258) 5 + +Nonterminals, with rules where they appear + +$axiom (8) + on left: 0 +exp (9) + on left: 1 2 3 4 5, on right: 0 1 2 3 4 +@end example + +@noindent +@cindex item +@cindex pointed rule +@cindex rule, pointed +Bison then proceeds onto the automaton itself, describing each state +with it set of @dfn{items}, also known as @dfn{pointed rules}. Each +item is a production rule together with a point (marked by @samp{.}) +that the input cursor. + +@example +state 0 + + $axiom -> . exp $ (rule 0) + + NUM shift, and go to state 1 + + exp go to state 2 +@end example + +This reads as follows: ``state 0 corresponds to being at the very +beginning of the parsing, in the initial rule, right before the start +symbol (here, @code{exp}). When the parser returns to this state right +after having reduced a rule that produced an @code{exp}, the control +flow jumps to state 2. If there is no such transition on a nonterminal +symbol, and the lookahead is a @code{NUM}, then this token is shifted on +the parse stack, and the control flow jumps to state 1. Any other +lookahead triggers a parse error.'' + +@cindex core, item set +@cindex item set core +@cindex kernel, item set +@cindex item set core +Even though the only active rule in state 0 seems to be rule 0, the +report lists @code{NUM} as a lookahead symbol because @code{NUM} can be +at the beginning of any rule deriving an @code{exp}. By default Bison +reports the so-called @dfn{core} or @dfn{kernel} of the item set, but if +you want to see more detail you can invoke @command{bison} with +@option{--report=itemset} to list all the items, include those that can +be derived: + +@example +state 0 + + $axiom -> . exp $ (rule 0) + exp -> . exp '+' exp (rule 1) + exp -> . exp '-' exp (rule 2) + exp -> . exp '*' exp (rule 3) + exp -> . exp '/' exp (rule 4) + exp -> . NUM (rule 5) + + NUM shift, and go to state 1 + + exp go to state 2 +@end example + +@noindent +In the state 1... + +@example +state 1 + + exp -> NUM . (rule 5) + + $default reduce using rule 5 (exp) +@end example + +@noindent +the rule 5, @samp{exp: NUM;}, is completed. Whatever the lookahead +(@samp{$default}), the parser will reduce it. If it was coming from +state 0, then, after this reduction it will return to state 0, and will +jump to state 2 (@samp{exp: go to state 2}). + +@example +state 2 + + $axiom -> exp . $ (rule 0) + exp -> exp . '+' exp (rule 1) + exp -> exp . '-' exp (rule 2) + exp -> exp . '*' exp (rule 3) + exp -> exp . '/' exp (rule 4) + + $ shift, and go to state 3 + '+' shift, and go to state 4 + '-' shift, and go to state 5 + '*' shift, and go to state 6 + '/' shift, and go to state 7 +@end example + +@noindent +In state 2, the automaton can only shift a symbol. For instance, +because of the item @samp{exp -> exp . '+' exp}, if the lookahead if +@samp{+}, it will be shifted on the parse stack, and the automaton +control will jump to state 4, corresponding to the item @samp{exp -> exp +'+' . exp}. Since there is no default action, any other token than +those listed above will trigger a parse error. + +The state 3 is named the @dfn{final state}, or the @dfn{accepting +state}: + +@example +state 3 + + $axiom -> exp $ . (rule 0) + + $default accept +@end example + +@noindent +the initial rule is completed (the start symbol and the end +of input were read), the parsing exits successfully. + +The interpretation of states 4 to 7 is straightforward, and is left to +the reader. + +@example +state 4 + + exp -> exp '+' . exp (rule 1) + + NUM shift, and go to state 1 + + exp go to state 8 + +state 5 + + exp -> exp '-' . exp (rule 2) + + NUM shift, and go to state 1 + + exp go to state 9 + +state 6 + + exp -> exp '*' . exp (rule 3) + + NUM shift, and go to state 1 + + exp go to state 10 + +state 7 + + exp -> exp '/' . exp (rule 4) + + NUM shift, and go to state 1 + + exp go to state 11 +@end example + +As was announced in beginning of the report, @samp{State 8 contains 1 +shift/reduce conflict}: + +@example +state 8 + + exp -> exp . '+' exp (rule 1) + exp -> exp '+' exp . (rule 1) + exp -> exp . '-' exp (rule 2) + exp -> exp . '*' exp (rule 3) + exp -> exp . '/' exp (rule 4) + + '*' shift, and go to state 6 + '/' shift, and go to state 7 + + '/' [reduce using rule 1 (exp)] + $default reduce using rule 1 (exp) +@end example + +Indeed, there are two actions associated to the lookahead @samp{/}: +either shifting (and going to state 7), or reducing rule 1. The +conflict means that either the grammar is ambiguous, or the parser lacks +information to make the right decision. Indeed the grammar is +ambiguous, as, since we did not specify the precedence of @samp{/}, the +sentence @samp{NUM + NUM / NUM} can be parsed as @samp{NUM + (NUM / +NUM)}, which corresponds to shifting @samp{/}, or as @samp{(NUM + NUM) / +NUM}, which corresponds to reducing rule 1. + +Because in LALR(1) parsing a single decision can be made, Bison +arbitrarily chose to disable the reduction, see @ref{Shift/Reduce, , +Shift/Reduce Conflicts}. Discarded actions are reported in between +square brackets. + +Note that all the previous states had a single possible action: either +shifting the next token and going to the corresponding state, or +reducing a single rule. In the other cases, i.e., when shifting +@emph{and} reducing is possible or when @emph{several} reductions are +possible, the lookahead is required to select the action. State 8 is +one such state: if the lookahead is @samp{*} or @samp{/} then the action +is shifting, otherwise the action is reducing rule 1. In other words, +the first two items, corresponding to rule 1, are not eligible when the +lookahead is @samp{*}, since we specified that @samp{*} has higher +precedence that @samp{+}. More generally, some items are eligible only +with some set of possible lookaheads. When run with +@option{--report=lookahead}, Bison specifies these lookaheads: + +@example +state 8 + + exp -> exp . '+' exp [$, '+', '-', '/'] (rule 1) + exp -> exp '+' exp . [$, '+', '-', '/'] (rule 1) + exp -> exp . '-' exp (rule 2) + exp -> exp . '*' exp (rule 3) + exp -> exp . '/' exp (rule 4) + + '*' shift, and go to state 6 + '/' shift, and go to state 7 + + '/' [reduce using rule 1 (exp)] + $default reduce using rule 1 (exp) +@end example + +The remaining states are similar: + +@example +state 9 + + exp -> exp . '+' exp (rule 1) + exp -> exp . '-' exp (rule 2) + exp -> exp '-' exp . (rule 2) + exp -> exp . '*' exp (rule 3) + exp -> exp . '/' exp (rule 4) + + '*' shift, and go to state 6 + '/' shift, and go to state 7 + + '/' [reduce using rule 2 (exp)] + $default reduce using rule 2 (exp) + +state 10 + + exp -> exp . '+' exp (rule 1) + exp -> exp . '-' exp (rule 2) + exp -> exp . '*' exp (rule 3) + exp -> exp '*' exp . (rule 3) + exp -> exp . '/' exp (rule 4) + + '/' shift, and go to state 7 + + '/' [reduce using rule 3 (exp)] + $default reduce using rule 3 (exp) + +state 11 + + exp -> exp . '+' exp (rule 1) + exp -> exp . '-' exp (rule 2) + exp -> exp . '*' exp (rule 3) + exp -> exp . '/' exp (rule 4) + exp -> exp '/' exp . (rule 4) + + '+' shift, and go to state 4 + '-' shift, and go to state 5 + '*' shift, and go to state 6 + '/' shift, and go to state 7 + + '+' [reduce using rule 4 (exp)] + '-' [reduce using rule 4 (exp)] + '*' [reduce using rule 4 (exp)] + '/' [reduce using rule 4 (exp)] + $default reduce using rule 4 (exp) +@end example + +@noindent +Observe that state 11 contains conflicts due to the lack of precedence +of @samp{/} wrt @samp{+}, @samp{-}, and @samp{*}, but also because the +associativity of @samp{/} is not specified. + + +@node Tracing +@section Tracing Your Parser @findex yydebug @cindex debugging @cindex tracing the parser @@ -4938,15 +5393,32 @@ clear the flag. If a Bison grammar compiles properly but doesn't do what you want when it runs, the @code{yydebug} parser-trace feature can help you figure out why. -To enable compilation of trace facilities, you must define the macro -@code{YYDEBUG} to a nonzero value when you compile the parser. You -could use @samp{-DYYDEBUG=1} as a compiler option or you could put -@samp{#define YYDEBUG 1} in the prologue of the grammar file -(@pxref{Prologue, , The Prologue}). Alternatively, use the @samp{-t} -option when you run Bison (@pxref{Invocation, ,Invoking Bison}) or the -@code{%debug} declaration (@pxref{Decl Summary, ,Bison Declaration -Summary}). We suggest that you always define @code{YYDEBUG} so that -debugging is always possible. +There are several means to enable compilation of trace facilities: + +@table @asis +@item the macro @code{YYDEBUG} +@findex YYDEBUG +Define the macro @code{YYDEBUG} to a nonzero value when you compile the +parser. This is compliant with POSIX Yacc. You could use +@samp{-DYYDEBUG=1} as a compiler option or you could put @samp{#define +YYDEBUG 1} in the prologue of the grammar file (@pxref{Prologue, , The +Prologue}). + +@item the option @option{-t}, @option{--debug} +Use the @samp{-t} option when you run Bison (@pxref{Invocation, +,Invoking Bison}). This is POSIX compliant too. + +@item the directive @samp{%debug} +@findex %debug +Add the @code{%debug} directive (@pxref{Decl Summary, ,Bison +Declaration Summary}). This is a Bison extension, which will prove +useful when Bison will output parsers for languages that don't use a +preprocessor. Useless POSIX and Yacc portability matter to you, this is +the preferred solution. +@end table + +We suggest that you always enable the debug option so that debugging is +always possible. The trace facility outputs messages with macro calls of the form @code{YYFPRINTF (stderr, @var{format}, @var{args})} where @@ -5017,6 +5489,8 @@ yyprint (FILE *file, int type, YYSTYPE value) @} @end smallexample +@c ================================================= Invoking Bison + @node Invocation @chapter Invoking Bison @cindex invoking Bison @@ -5096,7 +5570,7 @@ Equivalent to @samp{-o y.tab.c}; the parser output file is called @file{y.tab.c}, and the other outputs are called @file{y.output} and @file{y.tab.h}. The purpose of this option is to imitate Yacc's output file name conventions. Thus, the following shell script can substitute -for Yacc:@refill +for Yacc: @example bison -y $* @@ -5116,7 +5590,7 @@ you are developing Bison. @itemx --debug In the parser file, define the macro @code{YYDEBUG} to 1 if it is not already defined, so that the debugging facilities are compiled. -@xref{Debugging, ,Debugging Your Parser}. +@xref{Tracing, ,Tracing Your Parser}. @item --locations Pretend that @code{%locations} was specified. @xref{Decl Summary}. @@ -5162,6 +5636,27 @@ Same as above, but save in the file @var{defines-file}. Pretend that @code{%verbose} was specified, i.e, specify prefix to use for all Bison output file names. @xref{Decl Summary}. +@item -r @var{things} +@itemx --report=@var{things} +Write an extra output file containing verbose description of the comma +separated list of @var{things} among: + +@table @code +@item state +Description of the grammar, conflicts (resolved and unresolved), and +LALR automaton. + +@item lookahead +Implies @code{state} and augments the description of the automaton with +each rule's lookahead set. + +@item itemset +Implies @code{state} and augments the description of the automaton with +the full set of items for each state, instead of its core only. +@end table + +For instance, on the following grammar + @item -v @itemx --verbose Pretend that @code{%verbose} was specified, i.e, write an extra output @@ -5189,7 +5684,6 @@ the output graph filename. @node Environment Variables @section Environment Variables @cindex environment variables -@cindex BISON_HAIRY @cindex BISON_SIMPLE Here is a list of environment variables which affect the way Bison @@ -5197,18 +5691,11 @@ runs. @table @samp @item BISON_SIMPLE -@itemx BISON_HAIRY Much of the parser generated by Bison is copied verbatim from a file called @file{bison.simple}. If Bison cannot find that file, or if you would like to direct Bison to use a different copy, setting the environment variable @code{BISON_SIMPLE} to the path of the file will cause Bison to use that copy instead. - -When the @samp{%semantic-parser} declaration is used, Bison copies from -a file called @file{bison.hairy} instead. The location of this file can -also be specified or overridden in a similar fashion, with the -@code{BISON_HAIRY} environment variable. - @end table @node Option Cross Key @@ -5289,6 +5776,22 @@ would instead be named @file{foo_tab.c}. @cindex symbols in Bison, table of @table @code +@item @@$ +In an action, the location of the left-hand side of the rule. + @xref{Locations, , Locations Overview}. + +@item @@@var{n} +In an action, the location of the @var{n}-th symbol of the right-hand +side of the rule. @xref{Locations, , Locations Overview}. + +@item $$ +In an action, the semantic value of the left-hand side of the rule. +@xref{Actions}. + +@item $@var{n} +In an action, the semantic value of the @var{n}-th symbol of the +right-hand side of the rule. @xref{Actions}. + @item error A token name reserved for error recovery. This token may be used in grammar rules so as to allow the Bison parser to recognize an error in @@ -5314,6 +5817,10 @@ read, by making @code{yyparse} return 0 immediately. Macro to discard a value from the parser stack and fake a look-ahead token. @xref{Action Features, ,Special Features for Use in Actions}. +@item YYDEBUG +Macro to define to equip the parser with tracing code. @xref{Tracing, +,Tracing Your Parser}. + @item YYERROR Macro to pretend that a syntax error has just been detected: call @code{yyerror} and then perform normal error recovery if possible @@ -5376,7 +5883,7 @@ look-ahead token. @xref{Error Recovery}. @item yydebug External integer variable set to zero by default. If @code{yydebug} is given a nonzero value, the parser will output information on input -symbols and parser action. @xref{Debugging, ,Debugging Your Parser}. +symbols and parser action. @xref{Tracing, ,Tracing Your Parser}. @item yyerrok Macro to cause parser to recover immediately to its normal mode @@ -5487,6 +5994,8 @@ Bison declaration to specify several possible data types for semantic values. @xref{Union Decl, ,The Collection of Value Types}. @end table +@sp 1 + These are the punctuation and delimiters used in Bison input: @table @samp