X-Git-Url: https://git.saurik.com/bison.git/blobdiff_plain/cbd50549099fd3c84814e608025dcd2c3ccf0aaa..a924ef368d861a0593285ac9640837b9080f29ca:/ChangeLog diff --git a/ChangeLog b/ChangeLog index 4573fc0c..d163147c 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,889 @@ +2008-02-06 Juan Manuel Guerrero + + DJGPP specific issues. + * djgpp/config.bat: Add filenames that are not 8.3 clean and that must + be changed. Copyright timestamp adjusted. + * djgpp/config.sed: Add filenames that are not 8.3 clean and that must + be changed. Copyright timestamp adjusted. + * djgpp/config.site: Copyright timestamp adjusted. + * djgpp/config_h.sed: Copyright timestamp adjusted. + * djgpp/djunpack.bat: Copyright timestamp adjusted. + * djgpp/fnchnage.lst: Add filenames that are not 8.3 clean to the + filename translation list. + * djgpp/subpipe.c (init_subpipe): Check the environment variables + TMPDIR, TMP and TEMP, in that order, to determinate where the temp + files shall be created. Before trying to use the temp dir where the + environment variable points to check that the dir really exists. If + not default to the cwd as temp dir. Copyright timestamp adjusted. + * djgpp/subpipe.h: Copyright timestamp adjusted. + * djgpp/testsuite.sed: Copyright timestamp adjusted. + +2008-01-30 Paul Eggert + + * doc/bison.texinfo: Update Back-Cover text to reflect new GNU wording. + +2008-01-09 Paul Eggert + + * data/yacc.c (yyparse): Correct the comment when locations aren't used. + Problem reported by Claudio Saavedra in + . + +2008-01-05 Wojciech Polak + + * data/xslt/xml2xhtml.xsl (xsl:template match="/"): Precede an XHTML + document's title with the input grammar file name. + +2007-12-22 Joel E. Denny + + Automate regression testing of the XML/XSLT implementation. Discussed + starting at + . + * configure.ac (XSLTPROC): New substitution. + * Makefile.am (maintainer-xml-check): New phony target invoking... + * tests/Makefile.am (maintainer-xml-check): ... this new phony target + invoking make maintainer-check with BISON_TEST_XML=1. + * tests/atlocal.in (XSLTPROC): New. + * tests/local.at (AT_BISON_CHECK): New macro to (1) instruct Valgrind + not to report reachable memory when Bison is expected to have a + non-zero exit status and (2) to compare XML/XSLT output with --graph + and --report=all output for every working grammar when + BISON_TEST_XML=1. + (AT_BISON_CHECK_NO_XML): Likewise, but skip XML checks. + (AT_BISON_CHECK_XML): New. + (AT_QUELL_VALGRIND): New. + * tests/testsuite.at (ORIGINAL_AT_CHECK): Remove this and... + (AT_CHECK): ... don't redefine this since this was the old way to + quell Valgrind. + * tests/actions.at: Rewrite all AT_CHECK invocations for bison as + AT_BISON_CHECK invocations. + * tests/c++.at: Likewise. + * tests/calc.at: Likewise. + * tests/conflicts.at: Likewise. + * tests/cxx-type.at: Likewise. + * tests/existing.at: Likewise. + * tests/glr-regression.at: Likewise. + * tests/headers.at: Likewise. + * tests/input.at: Likewise. + * tests/java.at: Likewise. + * tests/output.at: Likewise. + * tests/push.at: Likewise. + * tests/reduce.at: Likewise. + * tests/regression.at: Likewise. + * tests/sets.at: Likewise. + * tests/skeletons.at: Likewise. + * tests/synclines.at: Likewise. + * tests/torture.at: Likewise. + (Big triangle): Use AT_BISON_CHECK_NO_XML instead since this grammar + tends to hang xsltproc. + (Big horizontal): Likewise. + +2007-12-08 Joel E. Denny + + In XML output, remove redundant class attribute on symbol element. + * data/xslt/bison.xsl (xsl:key name="bison:symbolByName"): New. + * data/xslt/xml2xhtml.xsl (xsl:template match="symbol"): Use it to + look up a symbol to determine whether it's a nonterminal or terminal. + * src/gram.c (rule_rhs_print_xml): Remove class attribute. + * src/state.c (state_rule_lookahead_tokens_print_xml): Likewise. + + Add prec/assoc information to XML output. + * src/gram.c (grammar_rules_print_xml): For each rule that has a + %prec, add a percent_prec attribute. + * src/print-xml.c (print_grammar): For each terminal that has a + precedence or associativity, add a prec or assoc attribute. + (xml_indent): New. + (xml_puts): Use xml_indent. + (xml_printf): Use xml_indent. + * src/print-xml.h (xml_indent): Prototype. + + * tests/existing.at (GNU pic Grammar): Fix a rule miscopied from + . + +2007-12-08 Joel E. Denny + + * data/xslt/bison.xsl (bison:ruleNumber): Rename to... + (bison:ruleByNumber): ... this for clarity. + * data/xslt/xml2dot.xsl (xsl:template match="item"): Update. + * data/xslt/xml2text.xsl (xsl:template match="item"): Update. + (xsl:template match="reduction"): Update. + (xsl:template match="item"): Update. + (xsl:template match="reduction"): Update. + + In the XML output, don't print the list of rules where symbols appear. + Compute it in XSLT instead. Discussed at + . + * data/xslt/bison.xsl (bison:ruleByLhs): New. + (bison:ruleByRhs): New. + * data/xslt/xml2text.xsl (xsl:template match="terminal"): Use + bison:ruleByRhs. + (xsl:template match="terminal/rule"): Remove. + (xsl:template match="nonterminal"): Use bison:ruleByLhs and + bison:ruleByRhs. + (xsl:template match="nonterminal/left/rule|nonterminal/right/rule"): + Remove. + * data/xslt/xml2xhtml.xsl (xsl:template match="terminal"): Use + bison:ruleByRhs and mode="number-link" for rule template. + (xsl:template match="terminal/rule"): Remove. + (xsl:template match="nonterminal"): Use bison:ruleByLhs and + bison:ruleByRhs and mode="number-link" for rule template. + (xsl:template match="nonterminal/left/rule|nonterminal/right/rule"): + Rewrite as... + (xsl:template match="rule" mode="number-link"): ... this. + * src/print-xml.c (print_grammar): Don't print the list of rules. + +2007-12-01 Joel E. Denny + + Don't let --report affect XML output; always print all information. + Discussed at + . + * src/conflicts.c (log_resolution): Implement. + * src/print-xml.c (print_core): Implement. + (print_state): Implement. + (print_xml): Implement. + + * NEWS (2.3a+): Fix quotes. + * src/parse-gram.y (prologue_declaration): For consistency with -v, + don't let %verbose clear the list specified by --report. + +2007-11-26 Akim Demaille + + * data/Makefile.am (dist_pkgdata_DATA): Ship and install bison.xsl. + +2007-11-24 Joel E. Denny + + In the XML output, list useless and unused symbols and rules with the + useful ones and add a "usefulness" attribute. Discussed starting at + . + * src/gram.c (grammar_rules_partial_print_xml): Remove. + (grammar_rules_print_xml): Print all rules instead of just those + useful in the grammar, and add a "usefulness" attribute. + * src/gram.h (grammar_rules_partial_print_xml): Remove prototype. + * src/print-xml.c (print_rules_useless_in_parser): Remove. + (print_grammar): Print all nonterminals instead of just useful ones, + and add a "usefulness" attribute to nonterminals and terminals. + (print_xml): Don't print a separate "reductions" or + "rules-useless-in-parser" element. + * src/reduce.c (reduce_output): Use reduce_token_unused_in_grammar. + (reduce_xml): Remove. + (reduce_token_unused_in_grammar): New. + (reduce_nonterminal_useless_in_grammar): New. + * src/reduce.h (reduce_xml): Remove prototype. + (reduce_token_unused_in_grammar): Add prototype. + (reduce_nonterminal_useless_in_grammar): Add prototype. + * data/xslt/xml2text.xsl: Update for XML changes. + * data/xslt/xml2xhtml.xsl: Update for XML changes. + * tests/reduce.at (Useless Terminals): Update output. + (Useless Rules): Update output. + (Reduced Automaton): Update output. + + Say "Terminals unused in grammar" instead of "Unused terminals". + * NEWS (2.3a+): Update. + * doc/bison.texinfo (Understanding): Update example output. + * src/reduce.c (reduce_output): Implement. + * data/xslt/xml2text.xsl: Implement. + * data/xslt/xml2xhtml.xsl: Implement. + +2007-11-18 Joel E. Denny + + Accept --report-file=FILE to override the default `.output' filename. + * NEWS (2.3a+): Mention. + * doc/bison.texinfo (Bison Options): Add an entry. + * src/files.c (compute_output_file_names): Don't override + spec_verbose_file if already set. + * src/getargs.c (usage): Document --report-file. + (REPORT_FILE_OPTION): New anonymous enum member. + (long_options): Add entry for it. + (getargs): Add case for it setting spec_verbose_file. + + * build-aux/cross-options.pl: Don't record a short option just because + there's an arg. + * doc/.cvsignore: Add yacc.1. + +2007-11-14 Akim Demaille + + * doc/yacc.1.in: New. + * configure.ac, doc/Makefile.am: Adjust. + * configure.ac (PACKAGE_COPYRIGHT_YEAR): New substitution, and new + config.h symbol. + Use AC_SUBST for assignments too. + * src/getargs.c (version): Use PACKAGE_COPYRIGHT_YEAR. + +2007-11-10 Joel E. Denny + + * src/gram.c: Remove comments that duplicate comments in gram.h. + + When reporting useless rules and nonterminals, say "useless in grammar" + instead of "useless", and say "useless in parser" instead of "never + reduced". Discussed starting at + . + * NEWS (2.3a+): Mention this change. + * data/xslt/xml2text.xsl: Update output text and expected input XML + element names to match changes below. + * data/xslt/xml2xhtml.xsl: Likewise. + (xsl:template match="bison-xml-report"): Add missing entry in Table of + Contents: "Rules useless in parser due to conflicts". + * doc/bison.texinfo (Decl Summary): Reword a little. + (Understanding): Update example output for changes below. + * src/gram.c: (rule_useful_p): Rename to... + (rule_useful_in_grammar_p): ... this. + (rule_useless_p): Rename to... + (rule_useless_in_grammar_p): ... this. + (rule_never_reduced_p): Rename to... + (rule_useless_in_parser_p): ... this. + (grammar_rules_print): Update for renames. + (grammar_rules_print_xml): Update for renames. + (grammar_rules_never_reduced_report): Rename to... + (grammar_rules_useless_report): ... this since it is used for either + kind of useless rule. + * src/gram.h: Reword comments and update function names in prototypes. + * src/main.c (main): Say "rule useless in parser due to conflicts". + * src/print-xml.c (print_rules_never_reduced): Rename to... + (print_rules_useless_in_parser): ... this, and rename output XML + element "rules-never-reduced" to "rules-useless-in-parser". + (print_xml): Update for rename. + * src/print.c (print_results): Say "Rules useless in parser due to + conflicts". + * src/reduce.c (reduce_grammar_tables): Say "rule useless in grammar". + (nonterminals_reduce): Say "nonterminal useless in grammar". + (reduce_output): Say "Nonterminals useless in grammar". + Say "Rules useless in grammar". + (reduce_xml): Rename output XML element "useless" to + "useless-in-grammar". + (reduce_print): Don't report the count of grammatically useless rules + as "rules never reduced" just because %yacc is specified. + In the correct report of this count, say nonterminal(s) and rule(s) + "useless in grammar". + * tests/conflicts.at (S/R in initial): Update expected output. + (Defaulted Conflicted Reduction): Likewise. + (Unreachable States After Conflict Resolution): Likewise. + * tests/existing.at (GNU pic Grammar): Likewise. + * tests/reduce.at (Useless Nonterminals): Likewise. + (Useless Rules): Likewise. + (Reduced Automaton): Likewise. + (Underivable Rules): Likewise. + (Empty Language): Likewise. + +2007-11-09 Joel E. Denny + + * data/bison.m4 (b4_cat): Put a newline after the end delimiter of the + here document and before the EOF so that BSD's implementation of Bourne + shell doesn't parse the delimiter as part of the here document. + * doc/.cvsignore: Add cross-options.texi. + * src/getargs.c (usage): Add a blank line after the warning categories. + +2007-11-08 Paolo Bonzini + + * data/lalr1.java (Lexer): Remove usage of b4_pure_if. + +2007-11-05 Akim Demaille + + Remove Id: from bison.1. + * doc/Makefile.am (remove_time_stamp): Include the sed invocation. + (perl -0777 -pi -e 's/\.PP\nId): New. + (.x.1): Use it to ignore the version control revision. + +2007-11-05 Akim Demaille + + * build-aux/Makefile.am: Ship cross-options.pl. + * doc/Makefile.am: Always refer to cross-options.texi with + $(srcdir). + (MAINTAINERCLEANFILES): Add it. + +2007-11-04 Akim Demaille + + Generate the long/short option cross-table. + * build-aux/cross-options.pl: New. + * doc/Makefile.am (cross-options.texi): New. + * doc/bison.texinfo: Use it. + +2007-11-04 Akim Demaille + + Generate bison.1 using help2man. + * doc/common.x, doc/bison.x: New. + * doc/Makefile.am (bison.1, .x.1): New. + The code is taken from autoconf-2.61/man/Makefile.am. + * configure.ac: Look for help2man. + +2007-11-04 Akim Demaille + + Complete --help. + * src/getargs.c (usage): Document -W, make it clear that -d, + -g and -x have optional arguments. + +2007-11-04 Akim Demaille + + Find sha1sum when named gsha1sum. + * bootstrap (find_tool): New. + ($SHA1SUM): New. + +2007-10-28 Joel E. Denny + + Deprecate %pure-parser and add `%define api.pure'. Discussed starting + at + . + * NEWS (2.3a+): Mention. + * data/bison.m4 (b4_pure_if): Don't define it here. + * data/c.m4 (b4_identification): Depend on individual skeletons to + define b4_pure_flag, b4_push_flag, or b4_pull_flag if they use the + values of the %define variables api.pure or api.push_pull. Define + YYPURE, YYPUSH, and YYPULL accordingly. + * data/glr.c: Define b4_pure_if based on `%define api.pure' unless + glr.cc has already defined b4_pure_flag. + * data/push.c: Define b4_pure_if based on `%define api.pure'. + Remove YYPUSH and YYPULL since they're back in b4_identification again. + * data/yacc.c Define b4_pure_if based on `%define api.pure'. + * doc/bison.texinfo (Pure Decl): Update. + (Push Decl): Update. + (Decl Summary): Add api.pure to %define entry. + In %pure-parser entry, say it's deprecated and reference %define. + (Pure Calling): Update. + (Error Reporting): Update. + (C++ Scanner Interface): Update. + (How Can I Reset the Parser): Update. + (Table of Symbols): In %pure-parser entry, say it's deprecated and + reference %define. + * src/getargs.c (pure_parser): Remove global variable. + * src/getargs.h (pure_parser): Remove extern. + * src/output.c (prepare): Don't define pure_flag muscle. + * src/parse-gram.y (prologue_declaration): Implement %pure-parser as a + wrapper around `%define api.pure'. + * tests/calc.at (Simple LALR Calculator): Update. + (Simple GLR Calculator): Update. + * tests/cxx-type.at (GLR: Resolve ambiguity, pure, no locations): + Update. + (GLR: Resolve ambiguity, pure, locations): Update. + (GLR: Merge conflicting parses, pure, no locations): Update. + (GLR: Merge conflicting parses, pure, locations): Update. + * tests/glr-regression.at (Uninitialized location when reporting + ambiguity): Update + * tests/input.at (Unused %define api.pure): New test case. + * tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Update definition for + AT_PURE_IF and AT_PURE_AND_LOC_IF. + * tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update. + +2007-10-28 Joel E. Denny + + %define push_pull -> %define api.push_pull. Discussed starting at + . + * data/push.c: Expect the new name. + * data/yacc.c: Likewise. + * doc/bison.texinfo (Push Decl): Update. + (Decl Summary): Update %define entry. + (Push Parser Function): Update. + (Pull Parser Function): Update. + (Parser Create Function): Update. + (Parser Delete Function): Update. + * tests/calc.at (Simple LALR Calculator): Update. + * tests/input.at (%define enum variables): Update. + * tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update. + (Push Parsing: Multiple impure instances): Update. + (Push Parsing: Unsupported Skeletons): Update. + * tests/torture.at (Exploding the Stack Size with Alloca): Update. + (Exploding the Stack Size with Malloc): Update. + + * NEWS (2.3a+): Add an entry for the push parser, and clean up the + other entries some. + +2007-10-27 Joel E. Denny + + For the XML output's terminal element, rename @number to @token-number, + and add @symbol-number. In the nonterminal element, rename @number to + @symbol-number. Discussed starting at + . + * data/xslt/xml2text.xsl (xsl:template match="terminal"): Update for + renames. + (xsl:template match="nonterminal"): Likewise. + * data/xslt/xml2xhtml.xsl (xsl:template match="terminal"): Likewise. + (xsl:template match="nonterminal"): Likewise. + * src/print-xml.c (print_grammar): Implement. + +2007-10-21 Joel E. Denny + + * data/xslt/xml2dot.xsl (xsl:template match="automaton/state"): After + 2007-10-11 change, the child elements here are items not rules. + (xsl:template match="item"): New. + (xsl:template match="rule"): Update for new reduced itemset. + (xsl:template match="point"): Remove. + (xsl:template match="empty"): For consistency with --graph, don't + output "/* empty */". + * data/xslt/xml2text.xsl (xsl:template match="terminal"): When invoking + line-wrap, don't pass a negative value as first-line-length since this + won't work with the following changes. + (xsl:template name="line-wrap"): Simplify slightly. + (xsl:template name="ws-search"): Eliminate recursion. + * src/print_graph.c (print_core): Don't print a reduction's lookahead + set next to an item whose dot is not at the end of the RHS even if it + happens to be associated with the same rule. + +2007-10-19 Joel E. Denny + + Add %define lr.keep_unreachable_states. + * NEWS (2.3a+): Mention it in the entry for unreachable state removal. + * doc/bison.texinfo (Decl Summary): Mention it in the %define entry. + * src/main.c (main): Implement it. + * tests/conflicts.at (Unreachable States After Conflict Resolution): + Extend to test it, and fix a typo. + +2007-10-19 Joel E. Denny + + * NEWS (2.3a+): Add entry for recent .output file lookahead set fix. + * doc/bison.texinfo (Understanding): Remove a bogus lookahead set in + the example .output text. + * tests/regression.at (Extra lookahead sets in report): Improve wording + of comments. + +2007-10-17 Wojciech Polak + + * src/print-xml.c (print_grammar): Renamed + and attributes: + "type" to "number" and "symbol" to "name". + * data/xslt/xml2text.xsl (xsl:template match="terminal"): + Use new attribute names. + (xsl:template match="nonterminal"): Likewise. + * data/xslt/xml2xhtml.xsl: Likewise. + +2007-10-17 Joel E. Denny + + * doc/bison.texinfo (Bison Options): Add entry for --print-datadir. + (Option Cross Key): Likewise. + + * src/print-xml.c (print_core): Don't print a reduction's lookahead set + next to an item whose dot is not at the end of the RHS even if it + happens to be associated with the same rule. + * src/print.c (print_core): Likewise. + * tests/conflicts.at (Unresolved SR Conflicts): Update output. + (Resolved SR Conflicts): Update output. + * tests/regression.at (Extra lookahead sets in report): New test case. + +2007-10-11 Wojciech Polak + + * src/print-xml.c (print_core): Remove item set + redundancy. + * data/xslt/bison.xsl (bison:ruleNumber): New key. + Improve processing time. Suggested by Joel E. Denny. + * data/xslt/xml2dot.xsl (xsl:template name="escape"): + Write xsl:param "required" attribute as comment. + * data/xslt/xml2text.xsl (xsl:template match="item"): New. + (xsl:template match="rule"): Support new reduced itemset. + (xsl:template match="point"): Remove. + * data/xslt/xml2xhtml.xsl: Likewise. + +2007-10-09 Joel E. Denny + + * src/getargs.c (version): Update copyright year. + +2007-10-09 Joel E. Denny + + Make xml2dot.xsl and --graph produce the same output. + * data/xslt/xml2dot.xsl (xsl:template match="rule"): Use a ` ' + instead of a `\n'. That is, don't add escapes yet or they'll be doubly + escaped later. + (xsl:template name="output-node"): Use the new escape template instead + of the string-replace template directly. + (xsl:template name="output-edge"): Likewise. + (xsl:template name="escape"): New, escapes backslashes and newlines in + addition to quotation marks. + * src/graphviz.c (start_graph, output_node, output_edge): Add + whitespace to output for legibility. + + Make xml2text.xsl and --report produce the same output, and remove the + XML "conflicts" element since a conflict summary is easily extracted + from the automaton. + * data/xslt/bison.xsl: New. + (xsl:template match="state" mode="bison:count-conflicts): New. + * data/xslt/xml2text.xsl: Import bison.xsl. + (xsl:template match="bison-xml-report"): Instead of styling the + "conflicts" element, style the "automaton" element with mode + "conflicts". Unlike the former, the latter lists S/R and R/R + conflicts for a state on the same line. + (xsl:template match="conflicts"): Remove. + (xsl:template match="conflict"): Remove. + (xsl:template match="terminal"): Line-wrap the list of rules in which + the terminal is used. + (xsl:template match="nonterminal"): Likewise for nonterminals. + (xsl:template match="automaton" mode="conflicts"): New. + (xsl:template match="state" mode="conflicts"): New. + (xsl:template name="line-wrap"): New. + (xsl:template name="ws-search"): New. + * data/xslt/xml2xhtml.xsl: Import bison.xsl. + (xsl:template match="bison-xml-report"): Instead of styling the + "conflicts" element, style the "automaton" element with mode + "conflicts." + (xsl:template match="conflicts"): Remove. + (xsl:template match="conflict"): Remove. + (xsl:template match="automaton" mode="conflicts"): New. + (xsl:template match="state" mode="conflicts): New. + * src/conflicts.c (conflicts_output_xml): Remove. + * src/conflicts.h (conflicts_output_xml): Remove prototype. + * src/print-xml.c (print_xml): Don't invoke conflicts_output_xml. + * src/print.c (print_grammar): Consistently wrap at the 66th column so + the corresponding XSLT is easier. Also, never wrap between a word and + the comma that follows it. + +2007-10-08 Joel E. Denny + + Improve C++ namespace support. Discussed starting at + . + * data/c++.m4: (b4_namespace_ref, b4_namespace_open, + b4_namespace_close): New macros that interpret the %define variable + "namespace" so its value can contain "::" to indicate nested + namespaces. + * data/glr.cc (b4_namespace): Don't define, and replace all uses with + the above macros. + * data/lalr1.cc (b4_namespace): Likewise. + * data/location.cc (b4_namespace): Likewise. + * doc/bison.texinfo (Decl Summary): Move `%define push_pull' entry + inside a new table in the general %define entry. Document `%define + namespace' there as well. Point the %name-prefix entry to it since it + explains it more completely in the case of C++. + (C++ Bison Interface): Mention `%define namespace' instead of + %name-prefix. + (Table of Symbols): Remove the `%define push_pull' entry. The %define + entry suffices. + * tests/c++.at (Relative namespace references): New test case. + (Absolute namespace references): New test case. + (Syntactically invalid namespace references): New test case. + * tests/input.at (C++ namespace reference errors): New test case. + +2007-10-08 Joel E. Denny + + Add syncline support and location accessor to internal %define + interfaces. + * data/bison.m4 (b4_percent_define_get_loc): New. + (b4_percent_define_get_syncline): New. + (b4_percent_define_flag_if): Use b4_percent_define_get_loc. + (b4_percent_define_default): Record defining location as line 1 rather + than 0 for the sake of synchronizing #line's, and define + b4_percent_define_syncline(VARIABLE). + (b4_percent_define_check_values): Use b4_percent_define_get_loc. + * src/muscle_tab.c (muscle_syncline_grow): New. + (muscle_code_grow): Use muscle_syncline_grow. + (muscle_percent_define_insert): Use muscle_percent_define_get_loc, and + define b4_percent_define_syncline(VARIABLE). + (muscle_percent_define_get_loc): New. + (muscle_percent_define_get_syncline): New. + (muscle_percent_define_flag_if): Use muscle_percent_define_get_loc, and + remove some unused variables. + (muscle_percent_define_default): Record defining location as line 1 + rather than 0 for the sake of synchronizing #line's, and define + b4_percent_define_syncline(VARIABLE). + (muscle_percent_define_check_values): Use + muscle_percent_define_get_loc. + * src/muscle_tab.h (muscle_percent_define_get_loc): Prototype. + (muscle_percent_define_get_syncline): Prototype. + * tests/skeletons.at (%define Boolean variables: invalid skeleton + defaults): Update output for location change. + (Complaining during macro argument expansion): Extend to test + b4_percent_define_get_loc and b4_percent_define_get_syncline errors. + +2007-10-07 Joel E. Denny + + Fix some error-reporting macro bugs. + * data/bison.m4 (b4_cat): New. + (b4_error, b4_error_at): Use b4_cat to send error directives directly + to stdout so they don't become arguments to other macros. Update + comments and add examples. + (b4_warn, b4_warn_at, b4_complain, b4_complain_at): Update comments and + add examples. + (b4_fatal, b4_fatal_at): Likewise, and invoke m4_exit(1) immediately + after printing the error directive so that M4 doesn't report subsequent + problems that are induced by this problem. + * src/scan-skel.l: Recognize @` digraph outside of directive arguments + instead of just in them. Recognize @\n in both places. Both expand to + the empty string. Needed by b4_cat. + * tests/skeletons.at (Complaining during macro argument expansion): + New test case. + (Fatal errors make M4 exit immediately): New test case. + +2007-10-04 Joel E. Denny + + Implement --print-datadir. + * src/getargs.c (usage): Mention. + (PRINT_DATADIR_OPTION): New anonymous enum member. + (long_options): Add entry for it. + (getargs): Add case for it calling compute_pkgdatadir. + * src/output.c (output_skeleton): Encapsulate data directory + computation from here... + (prepare): ... and from here... + (compute_pkgdatadir): ... into this new function. + * src/output.h (compute_pkgdatadir): Prototype. + +2007-09-29 Joel E. Denny + + * src/print-xml.c (escape_bufs): New static global variable + replacing... + (xml_escape_n): ... the static local variable buf here. + (print_xml): Free memory for escape_bufs. + * src/reduce.c (reduce_xml): XML-escape terminal symbol tags. + +2007-09-25 Joel E. Denny + + Replace `%push-parser' and `%push-pull-parser' with + `%define push_pull "push"' and `%define push_pull "both"'. + `%define push_pull "pull"' is the default. + * doc/bison.texinfo (Push Decl, Push Parser Function, + Pull Parser Function, Parser Create Function, Parser Delete Function): + Update declarations. + (Decl Summary, Table of Symbols): Replace %push-parser and + %push-pull-parser entries with a %define push_pull entry. + * data/bison.m4 (b4_percent_define_check_values): New macro. + (b4_pull_if, b4_push_if, b4_use_push_for_pull_if): Move these + definitions... + * data/c.m4 (b4_identification): ... and the YYPUSH and YYPULL cpp + definitions... + * data/push.c: ... to here and compute them from the value of the + %define variable push_pull. + * data/c-skel.m4: Instead of choosing the push.c skeleton for push + parsing requests here... + * data/yacc.c: ... hack this to switch to push.c any time + b4_use_push_pull_flag or the %define variable push_pull is set. This + will go away when we mv push.c yacc.c. + * data/c++-skel.m4, data/glr.c, data/java-skel.m4: Don't report that + push parsing is not supported since unused %define variables are + reported anyway. + * src/getargs.c, src/getargs.h (pull_parser, push_parser): Remove. + * src/muscle_tab.h (muscle_percent_define_check_values): Update + comments for consistency with b4_percent_define_check_values. + * src/output.c (prepare): Don't insert b4_pull_flag and b4_push_flag + muscles. + * src/parse-gram.y (PERCENT_PUSH_PARSER, PERCENT_PUSH_PULL_PARSER): + Remove. + (prologue_declaration): Remove %push-parser and %push-pull-parser + rules. + * src/scan-gram.l (%push-parser, %push-pull-parser): Remove rules. + * tests/calc.at: Update declarations. + * tests/input.at (%define enum variables): New test case. + * tests/push.at (Push Parsing: Memory Leak for Early Deletion): Update + declaration. + (Push Parsing: Multiple impure instances): Update declaration. + (Push Parsing: Unsupported Skeletons): New test case. + * tests/torture.at (Exploding the Stack Size with Alloca): Update + declaration. + (Exploding the Stack Size with Malloc): Update declaration. + +2007-09-24 Wojciech Polak + + Add XSLT transformations. + + * data/xslt/xml2dot.xsl: Transform XML into DOT. + * data/xslt/xml2text.xsl: Transform XML into plain text. + * data/xslt/xml2xhtml.xsl: Transform XML into XHTML. + * data/Makefile.am (xsltdir): New variable. + (dist_xslt_DATA): Add xslt/*.xsl files. + +2007-09-23 Paul Eggert + + * src/conflicts.c (log_resolution): Fix indenting bugs I introduced. + Problem reported by Wojciech Polak. + * src/print-xml.c (xml_puts): Work even if LEVEL exceeds INT_MAX/2. + (xml_printf): Undo change I made on 21 September; that is, + indent 2 spaces, not 1. + +2007-09-23 Joel E. Denny + + Pacify ./configure --enable-gcc-warnings. + * src/print-xml.c, src/print-xml.h (xml_puts): Make third argument + `char const *' instead of `char *'. + * src/state.c (state_rule_lookahead_tokens_print_xml): Remove unused + local variable `sep'. + +2007-09-21 Paul Eggert + + * src/gram.c (rule_rhs_print_xml): Now static, since it isn't used + elsewhere. + * src/print-xml.c: Prefer "const" after types; that's more consistent. + (xml_printf): Indent just 1 space for level. + (e_char, xlate_char): Remove. + (xml_escape_string): Rewrite to avoid undefined behavior (used + storage that was freed from the stack). + (xml_escape_n): Don't bother checking for subscript error. + +2007-09-21 Wojciech Polak + + Add Bison XML Automaton Report. + + Add support for an -x option to generate an XML report. + It is not documented yet. + * src/print-xml.c: New file. + * src/print-xml.h: Likewise. + * lib/timevar.def (TV_XML): New var. + * src/Makefile.am (bison_SOURCES): Add print-xml.c, print-xml.h. + * src/conflicts.c: Include print-xml.h. + (solved_conflicts_xml_obstack): New var. + (log_resolution, conflicts_solve, conflicts_free): + Add support for XML report. + (conflicts_output_val): New function. + * src/conflicts.h (conflicts_output_val): New decl. + * src/files.c (spec_xml_file): New var. + (compute_output_file_names, output_file_names_free): Add XML support. + * src/files.h (spec_xml_file): New decl. + * src/getargs.c (xml_flag): New var. + (usage, short_options, long_options, getargs): Add XML support. + * src/getargs.h (xml_flag): New decl. + * src/gram.c: Include print-xml.h. + (rule_lhs_print_xml, rule_rhs_print_xml): + (grammar_rules_partial_print_xml, grammar_rules_print_xml): + New functions. + * src/gram.h: Declare external ones. + * src/main.c: Include print-xml.h. + (main): Add XML support. + * src/reduce.c: Include print-xml.h. + (reduce_xml): New function. + * src/reduce.h: Declare it. + * src/state.c: Include print-xml.h. + (state_new): Add XML support. + (state_rule_lookahead_tokens_print_xml): New function. + * src/state.h: Declare it. + (struct state): New member solved_conflicts_xml. + * src/symtab.c (symbol_class_get_string): New function. + * src/symtab.h: Declare it. + +2007-09-21 Paul Eggert + + * GNUmakefile: Switch to coreutils's version. + * bootstrap: Likewise. + * Makefile.cfg: Adjust to new GNUmakefile. + * README-hacking: Likewise. + + Import from gnulib: + + 2006-08-18 Paul Eggert + Bruno Haible + + * m4/bison-i18n.m4 (BISON_I18N): Also handle the case where yacc exists + and is a script that invokes bison. Tighten the code. Add comments. + +2007-08-28 Joel E. Denny + + Spell "boolean" as "Boolean". Reported by Akim Demaille. + * data/bison.m4 (b4_percent_define_flag_if): Fix complaint. + * doc/bison.texinfo (Decl Summary): Fix. + * src/muscle_tab.c (muscle_percent_define_flag_if): Fix complaint. + * tests/input.at (Boolean %define variables): Update output. + * tests/skeletons.at (%define boolean variables: invalid skeleton + defaults): Rename to... + (%define Boolean variables: invalid skeleton defaults): ... this and + update output. + +2007-08-17 Joel E. Denny + + In impure push mode, don't allow more than one yypstate to be allocated + since multiple impure parsers would corrupt yynerrs. + * data/push.c (yypstate_allocated): New static global variable + initialized to 0. + (yypull_parse): If yypstate_new returns 0, don't report it as memory + exhaustion if yypstate_allocated is 1, but still return 2. + (yypstate_new): Invoke yyerror and return 0 if yypstate_allocated is + already 1. Otherwise, set it to 1. + (yypstate_delete): Set it to 0. + * tests/push.at (Push Parsing: Multiple impure instances): New test + case. + +2007-08-17 Bob Rossi + + * doc/bison.texinfo (Push Decl): Document the push parser. + (Table of Symbols): Ditto. + (Pure Decl): Ditto. + (Decl Summary): Ditto. + (Multiple Parsers, Push Parser Function, Pull Parser Function, + Parser Create Function, Parser Delete Function): + Add new push parser symbols. + (Table of Symbols): Document push-parser, push-pull-parser, + yypush_parse, yypull_parse, yypstate_new and yypstate_delete. + +2007-08-15 Paul Eggert + + Update to GPLv3. + * doc/gpl-3.0.texi: New file. + * doc/gpl.texi: Remove. + * COPYING, GNUmakefile, HACKING, Makefile.am, Makefile.cfg: + * Makefile.maint, NEWS, PACKAGING, README, README-alpha: + * README-hacking, TODO, bootstrap, bootstrap.conf: + * configure.ac, data/Makefile.am, data/README, data/bison.m4: + * data/c++-skel.m4, data/c++.m4, data/c-skel.m4, data/c.m4: + * data/glr.c, data/glr.cc, data/java-skel.m4, data/java.m4: + * data/lalr1.cc, data/lalr1.java, data/location.cc: + * data/push.c, data/yacc.c, data/m4sugar/m4sugar.m4: + * djgpp/Makefile.maint, djgpp/README.in, djgpp/config.bat: + * djgpp/config.sed, djgpp/config.site, djgpp/config_h.sed: + * djgpp/djunpack.bat, djgpp/subpipe.c, djgpp/subpipe.h: + * djgpp/testsuite.sed, doc/Makefile.am, doc/bison.texinfo: + * doc/fdl.texi, doc/refcard.tex, etc/Makefile.am, etc/README: + * etc/bench.pl.in, examples/Makefile.am, examples/extexi: + * examples/calc++/Makefile.am, lib/Makefile.am, lib/abitset.c: + * lib/abitset.h, lib/bbitset.h, lib/bitset.c, lib/bitset.h: + * lib/bitset_stats.c, lib/bitset_stats.h, lib/bitsetv-print.c: + * lib/bitsetv-print.h, lib/bitsetv.c, lib/bitsetv.h: + * lib/ebitset.c, lib/ebitset.h, lib/get-errno.c: + * lib/get-errno.h, lib/lbitset.c, lib/lbitset.h: + * lib/libiberty.h, lib/main.c, lib/subpipe.c, lib/subpipe.h: + * lib/timevar.c, lib/timevar.def, lib/timevar.h: + * lib/vbitset.c, lib/vbitset.h, lib/yyerror.c: + * m4/c-working.m4, m4/cxx.m4, m4/m4.m4, m4/subpipe.m4: + * m4/timevar.m4, src/LR0.c, src/LR0.h, src/Makefile.am: + * src/assoc.c, src/assoc.h, src/closure.c, src/closure.h: + * src/complain.c, src/complain.h, src/conflicts.c: + * src/conflicts.h, src/derives.c, src/derives.h, src/files.c: + * src/files.h, src/flex-scanner.h, src/getargs.c: + * src/getargs.h, src/gram.c, src/gram.h, src/graphviz.c: + * src/lalr.c, src/lalr.h, src/location.c, src/location.h: + * src/main.c, src/muscle_tab.c, src/muscle_tab.h: + * src/nullable.c, src/nullable.h, src/output.c, src/output.h: + * src/parse-gram.c, src/parse-gram.h, src/parse-gram.y: + * src/print.c, src/print.h, src/print_graph.c: + * src/print_graph.h, src/reader.c, src/reader.h, src/reduce.c: + * src/reduce.h, src/relation.c, src/relation.h: + * src/revision.h, src/scan-code.h, src/scan-code.l: + * src/scan-gram.h, src/scan-gram.l, src/scan-skel.h: + * src/scan-skel.l, src/state.c, src/state.h, src/symlist.c: + * src/symlist.h, src/symtab.c, src/symtab.h, src/system.h: + * src/tables.c, src/tables.h, src/uniqstr.c, src/uniqstr.h: + * tests/Makefile.am, tests/actions.at, tests/c++.at: + * tests/calc.at, tests/conflicts.at, tests/cxx-type.at: + * tests/existing.at, tests/glr-regression.at: + * tests/headers.at, tests/input.at, tests/java.at: + * tests/local.at, tests/output.at, tests/push.at: + * tests/reduce.at, tests/regression.at, tests/sets.at: + * tests/skeletons.at, tests/synclines.at, tests/testsuite.at: + * tests/torture.at: + Update to GPLv3. + +2007-08-11 Joel E. Denny + + Get rid of broken %no-parser, -n, and --no-parser implementation and + documentation. + * TODO: Don't mention them. + * doc/bison.1: Likewise. + * doc/bison.texinfo (Decl Summary): Likewise. + (Bison Options): Likewise. + (Option Cross Key): Likewise. + * src/getargs.c (no_parser_flag): Remove global variable. + (usage): Don't print description of -n and --no-parser. + (long_options): Remove --no-parser entry here. + (getargs): Remove -n case in the switch here. + * src/getargs.h (no_parser_flag): Remove extern. + * tests/regression.at (Web2c Actions): Remove comment that mentions + --no-parser. + +2007-08-11 Joel E. Denny + + * tests/push.at (Push Parsing: Memory Leak for Early Deletion): Do not + name user variables starting with `yy'. Just pass NULL instead of a + dummy local &yylval to yypush_parse. + * tests/torture.at (AT_DATA_STACK_TORTURE): Do not name user variables + starting with `yy'. + +2007-08-03 Joel E. Denny + + * data/yacc.c (yyexhaustedlab): Define it when YYERROR_VERBOSE is + true since it's then always used regardless of whether yyoverflow is + defined. Reported by Christian Burger at + . + * THANKS: Add Christian Burger. + + * ChangeLog: For changes in doc/bison.texinfo, consistently reference + node names: say "Decl Summary" not "Bison Declaration Summary". + 2007-07-28 Joel E. Denny * src/muscle_tab.c (muscle_percent_define_flag_if): In order to @@ -242,38 +1128,38 @@ 2007-03-07 Paolo Bonzini - * data/java.m4 (b4_single_class_if): Remove. - (b4_abstract_if): Look at "%define abstract". - (b4_lexer_if): New. - (b4_union_name): Rename... - (b4_yystype): ... to this. Map to "%define stype". - (b4_rhs_value, b4_parse_param_decl, b4_lex_param_decl, - b4_maybe_throws): Fix quoting. - (b4_lex_param_call): Move below to keep b4_*_param_decl close. - * data/lalr1.java (Lexer interface): Always define. - (Lexer interface within parser class): Remove. - (YYLexer class): New, used when "%code lexer" is present. - (constructor): When "%code lexer" is used, pass %lex-param - to the lexer constructor. - (yylex, yyparse): Remove %lex-param from method invocations - (YYStack, yyaction, yyparse): Rename b4_union_name to b4_yystype. - - * doc/bison.texinfo (Java Bison Interface): Mention "%define - abstract". Rename "%define union_name" to "%define stype". - Rename method names according to previous patch. - (Java Scanner Interface): Describe "%code lexer" instead of - "%pure-parser" and "%define single_class". - (Java Differences): Mention "%code lexer". - - * tests/java.at (_AT_DATA_JAVA_CALC_Y): Remove final argument. - Include scanner here, using macros from tests/local.at. - (AT_DATA_CALC_Y): Remove final argument. - (_AT_CHECK_JAVA_CALC): Likewise. - (AT_CHECK_JAVA_CALC): Likewise. Test all four combinations - of %locations and %error-verbose. - (main): Test with and without %lex-param. - * tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Push AT_LEXPARAM_IF. - (AT_BISON_OPTION_POPDEFS): Pop it. + * data/java.m4 (b4_single_class_if): Remove. + (b4_abstract_if): Look at "%define abstract". + (b4_lexer_if): New. + (b4_union_name): Rename... + (b4_yystype): ... to this. Map to "%define stype". + (b4_rhs_value, b4_parse_param_decl, b4_lex_param_decl, + b4_maybe_throws): Fix quoting. + (b4_lex_param_call): Move below to keep b4_*_param_decl close. + * data/lalr1.java (Lexer interface): Always define. + (Lexer interface within parser class): Remove. + (YYLexer class): New, used when "%code lexer" is present. + (constructor): When "%code lexer" is used, pass %lex-param + to the lexer constructor. + (yylex, yyparse): Remove %lex-param from method invocations + (YYStack, yyaction, yyparse): Rename b4_union_name to b4_yystype. + + * doc/bison.texinfo (Java Bison Interface): Mention "%define + abstract". Rename "%define union_name" to "%define stype". + Rename method names according to previous patch. + (Java Scanner Interface): Describe "%code lexer" instead of + "%pure-parser" and "%define single_class". + (Java Differences): Mention "%code lexer". + + * tests/java.at (_AT_DATA_JAVA_CALC_Y): Remove final argument. + Include scanner here, using macros from tests/local.at. + (AT_DATA_CALC_Y): Remove final argument. + (_AT_CHECK_JAVA_CALC): Likewise. + (AT_CHECK_JAVA_CALC): Likewise. Test all four combinations + of %locations and %error-verbose. + (main): Test with and without %lex-param. + * tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Push AT_LEXPARAM_IF. + (AT_BISON_OPTION_POPDEFS): Pop it. 2007-03-07 Juan Manuel Guerrero @@ -729,8 +1615,8 @@ * NEWS (2.3a+): Add entry for the change to %define. Update entry for %code. * doc/bison.texinfo (Prologue Alternatives): Update. - (Bison Declaration Summary): In %defines entry, update mention of - `%code requires' and `%code provides'. + (Decl Summary): In %defines entry, update mention of `%code requires' + and `%code provides'. (C++ Location Values): Update %define uses. (Calc++ Parser Interface): Likewise. (Calc++ Parser): Likewise, and update `%code requires' uses. @@ -3007,7 +3893,7 @@ * doc/bison.texinfo (The prologue): Update names, and replace remaining prologue blocks with %*-header declarations. (Calc++ Parser): Likewise. - (Bison Declaration Summary): Update names. + (Decl Summary): Update names. (Table of Symbols): Update description. * src/parse-gram.y (PERCENT_AFTER_DEFINITIONS): Update to... (PERCENT_END_HEADER): ... this. @@ -3084,9 +3970,8 @@ header and code file. * doc/bison.texinfo (Prologue): Show use of %before-definitions instead of prologues for %union dependencies. - (Bison Declaration Summary): In %defines description, mention the - effect of %before-definitions and %after-definitions on the header - file. + (Decl Summary): In %defines description, mention the effect of + %before-definitions and %after-definitions on the header file. (Calc++ Parser): Forward declare driver in a %before-definitions rather than in the pre-prologue so that make check succeeds. (Table of Symbols): Add entries for %before-definitions and