X-Git-Url: https://git.saurik.com/bison.git/blobdiff_plain/cb9ec4fada480554cf47810fee736997d64e7427..1fa19a769721658bb53177596531afbbea8b4e1c:/doc/Doxyfile.in diff --git a/doc/Doxyfile.in b/doc/Doxyfile.in index d9264f0f..66626449 100644 --- a/doc/Doxyfile.in +++ b/doc/Doxyfile.in @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.3 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -38,7 +38,8 @@ PROJECT_NUMBER = "@PACKAGE_VERSION@" # for a project that appears at the top of each page and should give viewer # a quick idea about the purpose of the project. Keep the description short. -PROJECT_BRIEF = +PROJECT_BRIEF = "Generate a deterministic LR or generalized LR (GLR) \ +parser employing LALR(1), IELR(1), or canonical LR(1) parser tables." # With the PROJECT_LOGO tag one can specify an logo or icon that is # included in the documentation. The maximum height of the logo should not @@ -126,7 +127,9 @@ FULL_PATH_NAMES = NO # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -229,14 +232,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -249,6 +253,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = YES +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -269,10 +280,10 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES (the +# default) will make doxygen replace the get and set methods by a property in +# the documentation. This will only work if the methods are indeed getting or # setting a simple type. If this is not the case, or you want to show the # methods anyway, you should set this option to NO. @@ -362,7 +373,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -533,7 +545,8 @@ GENERATE_BUGLIST = YES GENERATE_DEPRECATEDLIST= YES # The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. +# documentation sections, marked by \if section-label ... \endif +# and \cond section-label ... \endcond blocks. ENABLED_SECTIONS = @@ -553,12 +566,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = NO - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -584,7 +591,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -597,7 +604,8 @@ LAYOUT_FILE = # requires the bibtex tool to be installed. See also # http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style # of the bibliography can be controlled using LATEX_BIB_STYLE. To use this -# feature you need bibtex and perl available in the search path. +# feature you need bibtex and perl available in the search path. Do not use +# file names with spaces, bibtex cannot handle them. CITE_BIB_FILES = @@ -697,9 +705,9 @@ RECURSIVE = YES # Note that relative paths are relative to the directory from which doxygen is # run. -EXCLUDE = @top_srcdir@/src/scan-gram.c \ - @top_srcdir@/src/scan-skel.c \ - @top_builddir@/src/parse-*.[ch] +EXCLUDE = @top_builddir@/src/scan-gram.c \ + @top_builddir@/src/scan-skel.c \ + @top_srcdir@/src/parse-*.[ch] # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or # directories that are symbolic links (a Unix file system feature) are excluded @@ -785,6 +793,13 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = +# If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page (index.html). +# This can be useful if you have a project on for instance GitHub and want reuse +# the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- @@ -803,7 +818,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -906,13 +921,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -953,20 +978,23 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = YES -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = NO +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -994,9 +1022,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher @@ -1145,11 +1173,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 4 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1186,6 +1209,13 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO +# When MathJax is enabled you can set the default output format to be used for +# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# SVG. The default value is HTML-CSS, which is slower, but has the best +# compatibility. + +MATHJAX_FORMAT = HTML-CSS + # When MathJax is enabled you need to specify the location relative to the # HTML output directory using the MATHJAX_RELPATH option. The destination # directory should contain the MathJax.js script. For instance, if the mathjax @@ -1214,15 +1244,50 @@ MATHJAX_EXTENSIONS = SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a PHP enabled web server instead of at the web client -# using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server -# based approach is that it scales better to large projects and allows -# full text search. The disadvantages are that it is more difficult to setup -# and does not have live searching capabilities. +# implemented using a web server instead of a web client using Javascript. +# There are two flavours of web server based search depending on the +# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for +# searching and an index file used by the script. When EXTERNAL_SEARCH is +# enabled the indexing and searching needs to be provided by external tools. +# See the manual for details. SERVER_BASED_SEARCH = NO +# When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain +# the search results. Doxygen ships with an example indexer (doxyindexer) and +# search engine (doxysearch.cgi) which are based on the open source search engine +# library Xapian. See the manual for configuration details. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will returned the search results when EXTERNAL_SEARCH is enabled. +# Doxygen ships with an example search engine (doxysearch) which is based on +# the open source search engine library Xapian. See the manual for configuration +# details. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. + +SEARCHDATA_FILE = searchdata.xml + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through other +# doxygen projects that are not otherwise connected via tags files, but are +# all added to the same search index. Each project needs to have a tag file set +# via GENERATE_TAGFILE. The search mapping then maps the name of the tag file +# to a relative location where the documentation can be found, +# similar to the +# TAGFILES option but without actually processing the tag file. +# The format is: EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... + +EXTRA_SEARCH_MAPPINGS = + #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- @@ -1506,7 +1571,9 @@ SEARCH_INCLUDES = YES # contain include files that are not input files but should be processed by # the preprocessor. -INCLUDE_PATH = @top_srcdir@ +INCLUDE_PATH = @top_srcdir@ \ + @top_srcdir@/lib \ + @top_builddir@/lib # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard # patterns (like *.h and *.hpp) to filter out the header-files in the @@ -1717,7 +1784,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = YES -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories.