X-Git-Url: https://git.saurik.com/bison.git/blobdiff_plain/a034c8b84911a09b68d92ebbe9a90e08f21aef23..c97011bfc1cabd3f7aa8e263f83d9e8a18a262bf:/tests/regression.at?ds=sidebyside diff --git a/tests/regression.at b/tests/regression.at index a18bfc45..13d3ab9e 100644 --- a/tests/regression.at +++ b/tests/regression.at @@ -1,5 +1,5 @@ # Bison Regressions. -*- Autotest -*- -# Copyright 2001 Free Software Foundation, Inc. +# Copyright (C) 2001, 2002 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -18,6 +18,67 @@ AT_BANNER([[Regression tests.]]) + +## ------------------------- ## +## Early token definitions. ## +## ------------------------- ## + + +AT_SETUP([Early token definitions]) + +# Found in GCJ: they expect the tokens to be defined before the user +# prologue, so that they can use the token definitions in it. + +AT_DATA([input.y], +[[%{ +void yyerror (const char *s); +int yylex (void); +%} + +%union +{ + int val; +}; +%{ +#ifndef MY_TOKEN +# error "MY_TOKEN not defined." +#endif +%} +%token MY_TOKEN +%% +exp: MY_TOKEN; +%% +]]) + +AT_CHECK([bison input.y -o input.c]) +AT_COMPILE([input.o], [-c input.c]) + +AT_CLEANUP + + + +## ---------------- ## +## Braces parsing. ## +## ---------------- ## + + +AT_SETUP([Braces parsing]) + +AT_DATA([input.y], +[[/* Bison used to swallow the character after `}'. */ + +%% +exp: { tests = {{{{{{{{{{}}}}}}}}}}; }; +%% +]]) + +AT_CHECK([bison -v input.y -o input.c]) + +AT_CHECK([fgrep 'tests = {{{{{{{{{{}}}}}}}}}};' input.c], 0, [ignore]) + +AT_CLEANUP + + ## ------------------ ## ## Duplicate string. ## ## ------------------ ## @@ -25,7 +86,7 @@ AT_BANNER([[Regression tests.]]) AT_SETUP([Duplicate string]) -AT_DATA([duplicate.y], +AT_DATA([input.y], [[/* `Bison -v' used to dump core when two tokens are defined with the same string, as LE and GE below. */ @@ -38,400 +99,537 @@ exp: '(' exp ')' | NUM ; %% ]]) -AT_CHECK([bison -v duplicate.y -o duplicate.c], 0, ignore, ignore) +AT_CHECK([bison -v input.y -o input.c], 0, [], +[[input.y:6.8-14: warning: symbol `"<="' used more than once as a literal string +]]) AT_CLEANUP -## ------------------------- ## -## Unresolved SR Conflicts. ## -## ------------------------- ## +## ------------------- ## +## Rule Line Numbers. ## +## ------------------- ## + +AT_SETUP([Rule Line Numbers]) -AT_SETUP([Unresolved SR Conflicts]) +AT_KEYWORDS([report]) AT_DATA([input.y], -[[%token NUM OP -%% -exp: exp OP exp | NUM; +[[%% +expr: +'a' + +{ + +} + +'b' + +{ + +} + +| + + +{ + + +} + +'c' + +{ + +}; ]]) -AT_CHECK([bison input.y -o input.c -v], 0, [], -[input.y contains 1 shift/reduce conflict. -]) +AT_CHECK([bison input.y -o input.c -v]) # Check the contents of the report. AT_CHECK([cat input.output], [], -[[State 4 contains 1 shift/reduce conflict. +[[Grammar + + 0 $accept: expr $end + + 1 @1: /* empty */ -Grammar + 2 expr: 'a' @1 'b' + + 3 @2: /* empty */ + + 4 expr: @2 'c' - Number, Line, Rule - 1 3 exp -> exp OP exp - 2 3 exp -> NUM Terminals, with rules where they appear -$ (-1) +$end (0) 0 +'a' (97) 2 +'b' (98) 2 +'c' (99) 4 error (256) -NUM (257) 2 -OP (258) 1 + Nonterminals, with rules where they appear -exp (5) - on left: 1 2, on right: 1 +$accept (6) + on left: 0 +expr (7) + on left: 2 4, on right: 0 +@1 (8) + on left: 1, on right: 2 +@2 (9) + on left: 3, on right: 4 state 0 - NUM shift, and go to state 1 + 0 $accept: . expr $end - exp go to state 2 + 'a' shift, and go to state 1 + $default reduce using rule 3 (@2) + + expr go to state 2 + @2 go to state 3 state 1 - exp -> NUM . (rule 2) + 2 expr: 'a' . @1 'b' - $default reduce using rule 2 (exp) + $default reduce using rule 1 (@1) + @1 go to state 4 state 2 - exp -> exp . OP exp (rule 1) - - $ go to state 5 - OP shift, and go to state 3 + 0 $accept: expr . $end + $end shift, and go to state 5 state 3 - exp -> exp OP . exp (rule 1) + 4 expr: @2 . 'c' - NUM shift, and go to state 1 + 'c' shift, and go to state 6 - exp go to state 4 +state 4 + 2 expr: 'a' @1 . 'b' -state 4 + 'b' shift, and go to state 7 - exp -> exp . OP exp (rule 1) - exp -> exp OP exp . (rule 1) - OP shift, and go to state 3 +state 5 - OP [reduce using rule 1 (exp)] - $default reduce using rule 1 (exp) + 0 $accept: expr $end . + $default accept -state 5 +state 6 - $ go to state 6 + 4 expr: @2 'c' . + $default reduce using rule 4 (expr) -state 6 +state 7 + + 2 expr: 'a' @1 'b' . - $default accept + $default reduce using rule 2 (expr) ]]) AT_CLEANUP -## --------------------- ## -## Solved SR Conflicts. ## -## --------------------- ## -AT_SETUP([Solved SR Conflicts]) +## ---------------------- ## +## Mixing %token styles. ## +## ---------------------- ## + + +AT_SETUP([Mixing %token styles]) +# Taken from the documentation. AT_DATA([input.y], -[[%token NUM OP -%right OP +[[%token OR "||" +%token LE 134 "<=" +%left OR "<=" +%% +exp: ; %% -exp: exp OP exp | NUM; ]]) -AT_CHECK([bison input.y -o input.c -v], 0, [], []) - -# Check the contents of the report. -AT_CHECK([cat input.output], [], -[[Conflict in state 4 between rule 1 and token OP resolved as shift. - -Grammar +AT_CHECK([bison -v input.y -o input.c]) - Number, Line, Rule - 1 4 exp -> exp OP exp - 2 4 exp -> NUM +AT_CLEANUP -Terminals, with rules where they appear -$ (-1) -error (256) -NUM (257) 2 -OP (258) 1 -Nonterminals, with rules where they appear +## ---------------- ## +## Invalid inputs. ## +## ---------------- ## -exp (5) - on left: 1 2, on right: 1 +AT_SETUP([Invalid inputs]) -state 0 +AT_DATA([input.y], +[[%% +? +default: 'a' } +%& +%a +%- +%{ +]]) - NUM shift, and go to state 1 +AT_CHECK([bison input.y], [1], [], +[[input.y:2.1: invalid character: `?' +input.y:3.14: invalid character: `}' +input.y:4.1: invalid character: `%' +input.y:4.2: invalid character: `&' +input.y:5.1: invalid character: `%' +input.y:6.1: invalid character: `%' +input.y:6.2: invalid character: `-' +input.y:7.1-8.0: unexpected end of file in a prologue +input.y:7.1-8.0: parse error, unexpected "%{...%}", expecting ";" or "|" +]]) - exp go to state 2 +AT_CLEANUP -state 1 +## ------------------- ## +## Token definitions. ## +## ------------------- ## - exp -> NUM . (rule 2) - - $default reduce using rule 2 (exp) +AT_SETUP([Token definitions]) +# Bison managed, when fed with `%token 'f' "f"' to #define 'f'! +AT_DATA([input.y], +[%{ +void yyerror (const char *s); +int yylex (void); +%} +[%token YYEOF 0 "end of file" +%token 'a' "a" +%token b "b" +%token c 'c' +%token 'd' d +%% +exp: "a"; +]]) -state 2 +AT_CHECK([bison input.y -o input.c]) +AT_COMPILE([input.o], [-c input.c]) +AT_CLEANUP - exp -> exp . OP exp (rule 1) - $ go to state 5 - OP shift, and go to state 3 +## -------------- ## +## Web2c Report. ## +## -------------- ## +# The generation of the reduction was once wrong in Bison, and made it +# miss some reductions. In the following test case, the reduction on +# `undef_id_tok' in state 1 was missing. This is stripped down from +# the actual web2c.y. -state 3 +AT_SETUP([Web2c Report]) - exp -> exp OP . exp (rule 1) +AT_KEYWORDS([report]) - NUM shift, and go to state 1 +AT_DATA([input.y], +[[%token undef_id_tok const_id_tok - exp go to state 4 +%start CONST_DEC_PART + +%% +CONST_DEC_PART: + CONST_DEC_LIST + ; + +CONST_DEC_LIST: + CONST_DEC + | CONST_DEC_LIST CONST_DEC + ; + +CONST_DEC: + { } undef_id_tok '=' const_id_tok ';' + ; +%% +]]) +AT_CHECK([bison -v input.y]) +AT_CHECK([cat input.output], 0, +[[Grammar + 0 $accept: CONST_DEC_PART $end -state 4 + 1 CONST_DEC_PART: CONST_DEC_LIST - exp -> exp . OP exp (rule 1) - exp -> exp OP exp . (rule 1) + 2 CONST_DEC_LIST: CONST_DEC + 3 | CONST_DEC_LIST CONST_DEC - OP shift, and go to state 3 + 4 @1: /* empty */ - $default reduce using rule 1 (exp) + 5 CONST_DEC: @1 undef_id_tok '=' const_id_tok ';' +Terminals, with rules where they appear -state 5 +$end (0) 0 +';' (59) 5 +'=' (61) 5 +error (256) +undef_id_tok (258) 5 +const_id_tok (259) 5 - $ go to state 6 +Nonterminals, with rules where they appear +$accept (7) + on left: 0 +CONST_DEC_PART (8) + on left: 1, on right: 0 +CONST_DEC_LIST (9) + on left: 2 3, on right: 1 3 +CONST_DEC (10) + on left: 5, on right: 2 3 +@1 (11) + on left: 4, on right: 5 -state 6 - $default accept -]]) +state 0 -AT_CLEANUP + 0 $accept: . CONST_DEC_PART $end + $default reduce using rule 4 (@1) + CONST_DEC_PART go to state 1 + CONST_DEC_LIST go to state 2 + CONST_DEC go to state 3 + @1 go to state 4 -## -------------------- ## -## %expect not enough. ## -## -------------------- ## -AT_SETUP([%expect not enough]) +state 1 -AT_DATA([input.y], -[[%token NUM OP -%expect 0 -%% -exp: exp OP exp | NUM; -]]) + 0 $accept: CONST_DEC_PART . $end -AT_CHECK([bison input.y -o input.c], 1, [], -[input.y contains 1 shift/reduce conflict. -expected 0 shift/reduce conflicts -]) -AT_CLEANUP + $end shift, and go to state 5 -## --------------- ## -## %expect right. ## -## --------------- ## +state 2 -AT_SETUP([%expect right]) + 1 CONST_DEC_PART: CONST_DEC_LIST . + 3 CONST_DEC_LIST: CONST_DEC_LIST . CONST_DEC -AT_DATA([input.y], -[[%token NUM OP -%expect 1 -%% -exp: exp OP exp | NUM; -]]) + undef_id_tok reduce using rule 4 (@1) + $default reduce using rule 1 (CONST_DEC_PART) -AT_CHECK([bison input.y -o input.c], 0) -AT_CLEANUP + CONST_DEC go to state 6 + @1 go to state 4 -## ------------------ ## -## %expect too much. ## -## ------------------ ## +state 3 -AT_SETUP([%expect too much]) + 2 CONST_DEC_LIST: CONST_DEC . -AT_DATA([input.y], -[[%token NUM OP -%expect 2 -%% -exp: exp OP exp | NUM; -]]) + $default reduce using rule 2 (CONST_DEC_LIST) -AT_CHECK([bison input.y -o input.c], 1, [], -[input.y contains 1 shift/reduce conflict. -expected 2 shift/reduce conflicts -]) -AT_CLEANUP +state 4 -## ---------------------- ## -## Mixing %token styles. ## -## ---------------------- ## + 5 CONST_DEC: @1 . undef_id_tok '=' const_id_tok ';' + undef_id_tok shift, and go to state 7 -AT_SETUP([Mixing %token styles]) -# Taken from the documentation. -AT_DATA([input.y], -[[%token OR "||" -%token LE 134 "<=" -%left OR "<=" -%% -exp: ; -%% -]]) +state 5 -AT_CHECK([bison -v input.y -o input.c], 0, ignore, ignore) + 0 $accept: CONST_DEC_PART $end . -AT_CLEANUP + $default accept +state 6 -## ---------------------- ## -## %union and --defines. ## -## ---------------------- ## + 3 CONST_DEC_LIST: CONST_DEC_LIST CONST_DEC . + $default reduce using rule 3 (CONST_DEC_LIST) -AT_SETUP([%union and --defines]) -AT_DATA([union.y], -[%union -{ - int integer; - char *string ; -} -%% -exp: {}; -]) +state 7 -AT_CHECK([bison --defines union.y]) + 5 CONST_DEC: @1 undef_id_tok . '=' const_id_tok ';' -AT_CLEANUP + '=' shift, and go to state 8 -## --------------------------------------- ## -## Duplicate '/' in C comments in %union ## -## --------------------------------------- ## +state 8 + 5 CONST_DEC: @1 undef_id_tok '=' . const_id_tok ';' -AT_SETUP([%union and C comments]) + const_id_tok shift, and go to state 9 -AT_DATA([union-comment.y], -[%union -{ - /* The int. */ int integer; - /* The string. */ char *string ; -} -%% -exp: {}; -]) -AT_CHECK([bison union-comment.y]) -AT_CHECK([fgrep '//*' union-comment.tab.c], [1], []) +state 9 -AT_CLEANUP + 5 CONST_DEC: @1 undef_id_tok '=' const_id_tok . ';' + ';' shift, and go to state 10 -## ----------------- ## -## Invalid input 1. ## -## ----------------- ## +state 10 -AT_SETUP([Invalid input: 1]) + 5 CONST_DEC: @1 undef_id_tok '=' const_id_tok ';' . -AT_DATA([input.y], -[[%% -? + $default reduce using rule 5 (CONST_DEC) ]]) -AT_CHECK([bison input.y], [1], [], -[input.y:2: invalid input: `?' -input.y:3: fatal error: no rules in the input grammar -]) - AT_CLEANUP -## ----------------- ## -## Invalid input 2. ## -## ----------------- ## +## --------------- ## +## Web2c Actions. ## +## --------------- ## + +# The generation of the mapping `state -> action' was once wrong in +# extremely specific situations. web2c.y exhibits this situation. +# Below is a stripped version of the grammar. It looks like one can +# simplify it further, but just don't: it is tuned to exhibit a bug, +# which disapears when applying sane grammar transformations. +# +# It used to be wrong on yydefact only: +# +# static const short yydefact[] = +# { +# - 2, 0, 1, 0, 0, 2, 3, 2, 5, 4, +# + 2, 0, 1, 0, 0, 0, 3, 2, 5, 4, +# 0, 0 +# }; +# +# but let's check all the tables. + +AT_SETUP([Web2c Actions]) -AT_SETUP([Invalid input: 2]) +AT_KEYWORDS([report]) AT_DATA([input.y], [[%% -default: 'a' } +statement: struct_stat; +struct_stat: /* empty. */ | if else; +if: "if" "const" "then" statement; +else: "else" statement; +%% ]]) -AT_CHECK([bison input.y], [1], [], -[input.y:2: invalid input: `}' -]) +AT_CHECK([bison -v input.y -o input.c]) -AT_CLEANUP - - - -## --------------------- ## -## Invalid CPP headers. ## -## --------------------- ## - -# AT_TEST_CPP_GUARD_H([INPUT-FILE-BASE) -# ------------------------------------- -m4_define([AT_TEST_CPP_GUARD_H], -[AT_SETUP([Invalid CPP guards: $1]) - -# Possibly create inner directories. -dirname=`AS_DIRNAME([$1])` -AS_MKDIR_P([$dirname]) - -AT_DATA([$1.y], -[%% -dummy: -]) +# Check only the tables. We don't use --no-parser, because it is +# still to be implemented in the experimental branch of Bison. +[sed -n 's/ *$//;/^static const.*\[\] =/,/^}/p' input.c >tables.c] -AT_CHECK([bison --defines=$1.h $1.y]) - -# CPP should be happy with it. -AT_CHECK([$CC -E $1.h], 0, [ignore]) +AT_CHECK([[cat tables.c]], 0, +[[static const unsigned char yytranslate[] = +{ + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6 +}; +static const unsigned char yyprhs[] = +{ + 0, 0, 3, 5, 6, 9, 14 +}; +static const signed char yyrhs[] = +{ + 8, 0, -1, 9, -1, -1, 10, 11, -1, 3, + 4, 5, 8, -1, 6, 8, -1 +}; +static const unsigned char yyrline[] = +{ + 0, 2, 2, 3, 3, 4, 5 +}; +static const char *const yytname[] = +{ + "$end", "error", "$undefined", "\"if\"", "\"const\"", "\"then\"", + "\"else\"", "$accept", "statement", "struct_stat", "if", "else", 0 +}; +static const unsigned short yytoknum[] = +{ + 0, 256, 257, 258, 259, 260, 261 +}; +static const unsigned char yyr1[] = +{ + 0, 7, 8, 9, 9, 10, 11 +}; +static const unsigned char yyr2[] = +{ + 0, 2, 1, 0, 2, 4, 2 +}; +static const unsigned char yydefact[] = +{ + 3, 0, 0, 2, 0, 0, 1, 3, 4, 3, + 6, 5 +}; +static const signed char yydefgoto[] = +{ + -1, 2, 3, 4, 8 +}; +static const signed char yypact[] = +{ + -2, -1, 4, -8, 0, 2, -8, -2, -8, -2, + -8, -8 +}; +static const signed char yypgoto[] = +{ + -8, -7, -8, -8, -8 +}; +static const unsigned char yytable[] = +{ + 10, 1, 11, 5, 6, 0, 7, 9 +}; +static const signed char yycheck[] = +{ + 7, 3, 9, 4, 0, -1, 6, 5 +}; +static const unsigned char yystos[] = +{ + 0, 3, 8, 9, 10, 4, 0, 6, 11, 5, + 8, 8 +}; +]]) AT_CLEANUP -]) - -AT_TEST_CPP_GUARD_H([input/input]) -AT_TEST_CPP_GUARD_H([9foo])