X-Git-Url: https://git.saurik.com/bison.git/blobdiff_plain/67a9768ed49978ce5c5d4d4636091c427ac0f3e6..02975b9aade52df362645b82a81ac2134290e221:/doc/bison.texinfo?ds=sidebyside diff --git a/doc/bison.texinfo b/doc/bison.texinfo index e78f4346..6183793b 100644 --- a/doc/bison.texinfo +++ b/doc/bison.texinfo @@ -2687,8 +2687,8 @@ feature test macros can affect the behavior of Bison-generated The functionality of @var{Prologue} sections can often be subtle and inflexible. As an alternative, Bison provides a set of more explicit directives: -@code{%code-top}, @code{%requires}, @code{%provides}, and @code{%code}. -@xref{Table of Symbols}. +@code{%code}, @code{%requires}, @code{%provides}, and @code{%code-top}. +@xref{Table of Symbols,,Bison Symbols}. Look again at the example of the previous section: @@ -2728,7 +2728,7 @@ You should prototype it in the second since Bison will insert that code This distinction in functionality between the two @var{Prologue} sections is established by the appearance of the @code{%union} between them. -This behavior raises several questions. +This behavior raises a few questions. First, why should the position of a @code{%union} affect definitions related to @code{YYLTYPE} and @code{yytokentype}? Second, what if there is no @code{%union}? @@ -2777,7 +2777,7 @@ as the two kinds of @var{Prologue} sections, but it's always explicit which kind you intend. Moreover, both kinds are always available even in the absence of @code{%union}. -The first @var{Prologue} section above now logically contains two parts. +The @code{%code-top} block above logically contains two parts. The first two lines need to appear in the parser code file. The fourth line is required by @code{YYSTYPE} and thus also needs to appear in the parser code file. @@ -2787,7 +2787,7 @@ appear before the @code{YYSTYPE} definition in that header file as well. Also, the @code{YYLTYPE} definition should appear in the parser header file to override the default @code{YYLTYPE} definition there. -In other words, in the first @var{Prologue} section, all but the first two +In other words, in the @code{%code-top} block above, all but the first two lines are dependency code for externally exposed definitions (@code{YYSTYPE} and @code{YYLTYPE}) required by Bison. Thus, they belong in one or more @code{%requires}: @@ -2834,6 +2834,18 @@ definitions in both the parser code file and the parser header file. (By the same reasoning, @code{%requires} would also be the appropriate place to write your own definition for @code{YYSTYPE}.) +When you are writing dependency code for @code{YYSTYPE} and @code{YYLTYPE}, you +should prefer @code{%requires} over @code{%code-top} regardless of whether you +instruct Bison to generate a parser header file. +When you are writing code that you need Bison to insert only into the parser +code file and that has no special need to appear at the top of the code file, +you should prefer @code{%code} over @code{%code-top}. +These practices will make the purpose of each block of your code explicit to +Bison and to other developers reading your grammar file. +Following these practices, we expect @code{%code} and @code{%requires} to be +the most important of the four @var{Prologue} alternative directives discussed +in this section. + At some point while developing your parser, you might decide to provide @code{trace_token} to modules that are external to your parser. Thus, you might wish for Bison to insert the prototype into both the parser @@ -2891,11 +2903,11 @@ file and the parser code file after the definitions for @code{yytokentype}, The above examples are careful to write directives in an order that reflects the layout of the generated parser code and header files: @code{%code-top}, @code{%requires}, @code{%provides}, and then @code{%code}. -While your grammar files will generally be easier to read if you also follow +While your grammar files may generally be easier to read if you also follow this order, Bison does not require it. Instead, Bison lets you choose an organization that makes sense to you. -Any of these directives may be declared multiple times in the grammar file. +You may declare any of these directives multiple times in the grammar file. In that case, Bison concatenates the contained code in declaration order. This is the only way in which the position of one of these directives within the grammar file affects its functionality. @@ -2926,6 +2938,15 @@ definitions section is going to adversely affect their functionality in some counter-intuitive manner just because it comes first. Such an organization is not possible using @var{Prologue} sections. +This section has been concerned with explaining the advantages of the four +@var{Prologue} alternative directives over the original Yacc @var{Prologue}. +However, in most cases when using these directives, you shouldn't need to +think about all the low-level ordering issues discussed here. +Instead, you should simply use these directives to label each block of your +code according to its purpose and let Bison handle the ordering. +@code{%code} is the most generic label. +Move code to @code{%requires}, @code{%provides}, or @code{%code-top} as needed. + @node Bison Declarations @subsection The Bison Declarations Section @cindex Bison declarations (introduction) @@ -4215,8 +4236,8 @@ For instance, if your locations use a file name, you may use @subsection Freeing Discarded Symbols @cindex freeing discarded symbols @findex %destructor -@findex %symbol-default - +@findex <*> +@findex <> During error recovery (@pxref{Error Recovery}), symbols already pushed on the stack and tokens coming from the rest of the file are discarded until the parser falls on its feet. If the parser runs out of memory, @@ -4244,21 +4265,26 @@ The Parser Function @code{yyparse}}). When a symbol is listed among @var{symbols}, its @code{%destructor} is called a per-symbol @code{%destructor}. You may also define a per-type @code{%destructor} by listing a semantic type -among @var{symbols}. +tag among @var{symbols}. In that case, the parser will invoke this @var{code} whenever it discards any -grammar symbol that has that semantic type unless that symbol has its own +grammar symbol that has that semantic type tag unless that symbol has its own per-symbol @code{%destructor}. -Finally, you may define a default @code{%destructor} by placing -@code{%symbol-default} in the @var{symbols} list of exactly one -@code{%destructor} declaration in your grammar file. -In that case, the parser will invoke the associated @var{code} whenever it -discards any user-defined grammar symbol for which there is no per-type or -per-symbol @code{%destructor}. +Finally, you can define two different kinds of default @code{%destructor}s. +You can place each of @code{<*>} and @code{<>} in the @var{symbols} list of +exactly one @code{%destructor} declaration in your grammar file. +The parser will invoke the @var{code} associated with one of these whenever it +discards any user-defined grammar symbol that has no per-symbol and no per-type +@code{%destructor}. +The parser uses the @var{code} for @code{<*>} in the case of such a grammar +symbol for which you have formally declared a semantic type tag (@code{%type} +counts as such a declaration, but @code{$$} does not). +The parser uses the @var{code} for @code{<>} in the case of such a grammar +symbol that has no declared semantic type tag. @end deffn @noindent -For instance: +For example: @smallexample %union @{ char *string; @} @@ -4269,35 +4295,52 @@ For instance: %union @{ char character; @} %token CHR %type chr -%destructor @{ free ($$); @} %symbol-default -%destructor @{ free ($$); printf ("%d", @@$.first_line); @} STRING1 string1 +%token TAGLESS + %destructor @{ @} +%destructor @{ free ($$); @} <*> +%destructor @{ free ($$); printf ("%d", @@$.first_line); @} STRING1 string1 +%destructor @{ printf ("Discarding tagless symbol.\n"); @} <> @end smallexample @noindent guarantees that, when the parser discards any user-defined symbol that has a semantic type tag other than @code{}, it passes its semantic value -to @code{free}. +to @code{free} by default. However, when the parser discards a @code{STRING1} or a @code{string1}, it also prints its line number to @code{stdout}. It performs only the second @code{%destructor} in this case, so it invokes @code{free} only once. - -Notice that a Bison-generated parser invokes the default @code{%destructor} -only for user-defined as opposed to Bison-defined symbols. -For example, the parser will not invoke it for the special Bison-defined -symbols @code{$accept}, @code{$undefined}, or @code{$end} (@pxref{Table of -Symbols, ,Bison Symbols}), none of which you can reference in your grammar. -It also will not invoke it for the @code{error} token (@pxref{Table of Symbols, -,error}), which is always defined by Bison regardless of whether you reference -it in your grammar. -However, it will invoke it for the end token (token 0) if you redefine it from -@code{$end} to, for example, @code{END}: +Finally, the parser merely prints a message whenever it discards any symbol, +such as @code{TAGLESS}, that has no semantic type tag. + +A Bison-generated parser invokes the default @code{%destructor}s only for +user-defined as opposed to Bison-defined symbols. +For example, the parser will not invoke either kind of default +@code{%destructor} for the special Bison-defined symbols @code{$accept}, +@code{$undefined}, or @code{$end} (@pxref{Table of Symbols, ,Bison Symbols}), +none of which you can reference in your grammar. +It also will not invoke either for the @code{error} token (@pxref{Table of +Symbols, ,error}), which is always defined by Bison regardless of whether you +reference it in your grammar. +However, it may invoke one of them for the end token (token 0) if you +redefine it from @code{$end} to, for example, @code{END}: @smallexample %token END 0 @end smallexample +@cindex actions in mid-rule +@cindex mid-rule actions +Finally, Bison will never invoke a @code{%destructor} for an unreferenced +mid-rule semantic value (@pxref{Mid-Rule Actions,,Actions in Mid-Rule}). +That is, Bison does not consider a mid-rule to have a semantic value if you do +not reference @code{$$} in the mid-rule's action or @code{$@var{n}} (where +@var{n} is the RHS symbol position of the mid-rule) in any later action in that +rule. +However, if you do reference either, the Bison-generated parser will invoke the +@code{<>} @code{%destructor} whenever it discards the mid-rule symbol. + @ignore @noindent In the future, it may be possible to redefine the @code{error} token as a @@ -4555,12 +4598,16 @@ header also contains their code. @xref{Table of Symbols, ,%requires}. @end deffn +@deffn {Directive} %defines @var{defines-file} +Same as above, but save in the file @var{defines-file}. +@end deffn + @deffn {Directive} %destructor Specify how the parser should reclaim the memory associated to discarded symbols. @xref{Destructor Decl, , Freeing Discarded Symbols}. @end deffn -@deffn {Directive} %file-prefix="@var{prefix}" +@deffn {Directive} %file-prefix "@var{prefix}" Specify a prefix to use for all Bison output file names. The names are chosen as if the input file were named @file{@var{prefix}.y}. @end deffn @@ -4573,14 +4620,14 @@ grammar does not use it, using @samp{%locations} allows for more accurate syntax error messages. @end deffn -@deffn {Directive} %name-prefix="@var{prefix}" +@deffn {Directive} %name-prefix "@var{prefix}" Rename the external symbols used in the parser so that they start with @var{prefix} instead of @samp{yy}. The precise list of symbols renamed in C parsers is @code{yyparse}, @code{yylex}, @code{yyerror}, @code{yynerrs}, @code{yylval}, @code{yychar}, @code{yydebug}, and (if locations are used) @code{yylloc}. For example, if you use -@samp{%name-prefix="c_"}, the names become @code{c_parse}, @code{c_lex}, +@samp{%name-prefix "c_"}, the names become @code{c_parse}, @code{c_lex}, and so on. In C++ parsers, it is only the surrounding namespace which is named @var{prefix} instead of @samp{yy}. @xref{Multiple Parsers, ,Multiple Parsers in the Same Program}. @@ -4613,7 +4660,7 @@ associate errors with the parser file, treating it an independent source file in its own right. @end deffn -@deffn {Directive} %output="@var{file}" +@deffn {Directive} %output "@var{file}" Specify @var{file} for the parser file. @end deffn @@ -7222,7 +7269,7 @@ Pretend that @code{%locations} was specified. @xref{Decl Summary}. @item -p @var{prefix} @itemx --name-prefix=@var{prefix} -Pretend that @code{%name-prefix="@var{prefix}"} was specified. +Pretend that @code{%name-prefix "@var{prefix}"} was specified. @xref{Decl Summary}. @item -l @@ -8523,6 +8570,18 @@ Separates alternate rules for the same result nonterminal. @xref{Rules, ,Syntax of Grammar Rules}. @end deffn +@deffn {Directive} <*> +Used to define a default tagged @code{%destructor} or default tagged +@code{%printer}. +@xref{Destructor Decl, , Freeing Discarded Symbols}. +@end deffn + +@deffn {Directive} <> +Used to define a default tagless @code{%destructor} or default tagless +@code{%printer}. +@xref{Destructor Decl, , Freeing Discarded Symbols}. +@end deffn + @deffn {Symbol} $accept The predefined nonterminal whose only rule is @samp{$accept: @var{start} $end}, where @var{start} is the start symbol. @xref{Start Decl, , The @@ -8598,6 +8657,11 @@ Bison declaration to create a header file meant for the scanner. @xref{Decl Summary}. @end deffn +@deffn {Directive} %defines @var{defines-file} +Same as above, but save in the file @var{defines-file}. +@xref{Decl Summary}. +@end deffn + @deffn {Directive} %destructor Specify how the parser should reclaim the memory associated to discarded symbols. @xref{Destructor Decl, , Freeing Discarded Symbols}. @@ -8630,7 +8694,7 @@ Bison declaration to request verbose, specific error message strings when @code{yyerror} is called. @end deffn -@deffn {Directive} %file-prefix="@var{prefix}" +@deffn {Directive} %file-prefix "@var{prefix}" Bison declaration to set the prefix of the output files. @xref{Decl Summary}. @end deffn @@ -8662,7 +8726,7 @@ function is applied to the two semantic values to get a single result. @xref{GLR Parsers, ,Writing @acronym{GLR} Parsers}. @end deffn -@deffn {Directive} %name-prefix="@var{prefix}" +@deffn {Directive} %name-prefix "@var{prefix}" Bison declaration to rename the external symbols. @xref{Decl Summary}. @end deffn @@ -8684,7 +8748,7 @@ Bison declaration to assign nonassociativity to token(s). @xref{Precedence Decl, ,Operator Precedence}. @end deffn -@deffn {Directive} %output="@var{file}" +@deffn {Directive} %output "@var{file}" Bison declaration to set the name of the parser file. @xref{Decl Summary}. @end deffn @@ -8755,11 +8819,6 @@ Bison declaration to specify the start symbol. @xref{Start Decl, ,The Start-Symbol}. @end deffn -@deffn {Directive} %symbol-default -Used to declare a default @code{%destructor} or default @code{%printer}. -@xref{Destructor Decl, , Freeing Discarded Symbols}. -@end deffn - @deffn {Directive} %token Bison declaration to declare token(s) without specifying precedence. @xref{Token Decl, ,Token Type Names}.