X-Git-Url: https://git.saurik.com/bison.git/blobdiff_plain/55bcd09a24d643f03046f4bbcc2985d40b01fe7e..fd6b609da9661ebab37643153bc02e633de25eb9:/Makefile.in diff --git a/Makefile.in b/Makefile.in index d4e9e795..a2a2c472 100644 --- a/Makefile.in +++ b/Makefile.in @@ -1,193 +1,414 @@ -# Makefile for bison -# Copyright (C) 1988, 1989, 1991, 1993 Bob Corbett and Free Software Foundation, Inc. -# -# This file is part of Bison, the GNU Compiler Compiler. -# -# Bison is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# Bison is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with Bison; see the file COPYING. If not, write to -# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - -#### Start of system configuration section. #### +# Makefile.in generated automatically by automake 1.4-p4 from Makefile.am -srcdir = @srcdir@ -VPATH = @srcdir@ +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -CC = @CC@ -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ -MAKEINFO = makeinfo +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. -# Things you might add to DEFS: -# -DSTDC_HEADERS If you have ANSI C headers and libraries. -# -DHAVE_STRING_H If you don't have ANSI C headers but have string.h. -# -DHAVE_MEMORY_H If you don't have ANSI C headers and have memory.h. -# -DHAVE_STRERROR If you have strerror function. -DEFS = @DEFS@ -CFLAGS = @CFLAGS@ -LDFLAGS = @LDFLAGS@ - -LIBS = @LIBS@ - -# Some System V machines do not come with libPW. If this is true, use -# the GNU alloca.o here. -ALLOCA = @ALLOCA@ +SHELL = @SHELL@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ -# where the installed binary goes -bindir = $(exec_prefix)/bin - -# where the parsers go -datadir = $(prefix)/share - -# where the info files go -infodir = $(prefix)/info - -# where manual pages go and what their extensions should be -mandir = $(prefix)/man/man$(manext) -manext = 1 - -#### End of system configuration section. #### - -DISTFILES = COPYING ChangeLog Makefile.in configure configure.in \ - REFERENCES bison.1 bison.rnh configure.bat \ - bison.simple bison.hairy \ - LR0.c allocate.c closure.c conflicts.c derives.c \ - files.c getargs.c gram.c lalr.c lex.c main.c nullable.c \ - output.c print.c reader.c reduce.c symtab.c version.c \ - warshall.c files.h gram.h lex.h machine.h new.h state.h \ - symtab.h system.h types.h bison.cld build.com vmsgetargs.c \ - vmshlp.mar README INSTALL NEWS bison.texinfo bison.info* texinfo.tex \ - getopt.c getopt.h getopt1.c alloca.c mkinstalldirs install-sh - - -SHELL = /bin/sh - -# This rule allows us to supply the necessary -D options -# in addition to whatever the user asks for. -.c.o: - $(CC) -c $(DEFS) -I$(srcdir)/../include $(CPPFLAGS) $(CFLAGS) $< +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include -# names of parser files -PFILE = bison.simple -PFILE1 = bison.hairy +DESTDIR = -PFILES = -DXPFILE=\"$(datadir)/$(PFILE)\" \ - -DXPFILE1=\"$(datadir)/$(PFILE1)\" +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ -OBJECTS = LR0.o allocate.o closure.o conflicts.o derives.o files.o \ - getargs.o gram.o lalr.o lex.o \ - main.o nullable.o output.o print.o reader.o reduce.o symtab.o \ - warshall.o version.o \ - getopt.o getopt1.o $(ALLOCA) +top_builddir = . -all: bison bison.info bison.s1 +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ -Makefile: config.status Makefile.in - CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status - -config.status: configure - ./config.status --recheck - -configure: configure.in - cd $(srcdir) && autoconf - -# Copy bison.simple, inserting directory name into the #line commands. -bison.s1: bison.simple - -rm -f bison.s1 - sed -e "/^#line/ s|bison|$(datadir)/bison|" < $(srcdir)/$(PFILE) > $@-tmp - mv $@-tmp $@ - -clean: - rm -f *.o core bison bison.s1 config.status config.log - -mostlyclean: clean - -distclean: clean - rm -f Makefile - -realclean: distclean - rm -f TAGS *.info* - -# Most of these deps are in case using RCS. -install: all bison.1 $(srcdir)/$(PFILE) $(srcdir)/$(PFILE1) installdirs uninstall - $(INSTALL_PROGRAM) bison $(bindir)/bison - $(INSTALL_DATA) bison.s1 $(datadir)/$(PFILE) - $(INSTALL_DATA) $(srcdir)/$(PFILE1) $(datadir)/$(PFILE1) - cd $(srcdir); for f in bison.info*; \ - do $(INSTALL_DATA) $$f $(infodir)/$$f; done - -$(INSTALL_DATA) $(srcdir)/bison.1 $(mandir)/bison.$(manext) - -# Make sure all installation directories, e.g. $(bindir) actually exist by -# making them if necessary. -installdirs: - -sh $(srcdir)/mkinstalldirs $(bindir) $(datadir) $(libdir) $(infodir) $(mandir) - -uninstall: - rm -f $(bindir)/bison - -cd $(datadir); rm -f $(PFILE) $(PFILE1) - rm -f $(mandir)/bison.$(manext) $(infodir)/bison.info* - -check: - @echo "No checks implemented (yet)." - -bison: $(OBJECTS) - $(CC) $(LDFLAGS) $(CFLAGS) -o $@ $(OBJECTS) $(LIBS) +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ +AT_TESTPATH = @AT_TESTPATH@ +BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@ +CATALOGS = @CATALOGS@ +CATOBJEXT = @CATOBJEXT@ +CC = @CC@ +CPP = @CPP@ +DATADIRNAME = @DATADIRNAME@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GENCAT = @GENCAT@ +GLIBC21 = @GLIBC21@ +GMOFILES = @GMOFILES@ +GMSGFMT = @GMSGFMT@ +INSTOBJEXT = @INSTOBJEXT@ +INTLBISON = @INTLBISON@ +INTLLIBS = @INTLLIBS@ +INTLOBJS = @INTLOBJS@ +INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@ +LIBICONV = @LIBICONV@ +LIBOBJS = @LIBOBJS@ +M4 = @M4@ +MAKEINFO = @MAKEINFO@ +MKINSTALLDIRS = @MKINSTALLDIRS@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +POFILES = @POFILES@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +U = @U@ +USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +WARNING_CFLAGS = @WARNING_CFLAGS@ + +AUTOMAKE_OPTIONS = 1.4 check-news readme-alpha + +ACLOCAL_AMFLAGS = -I m4 + +SUBDIRS = config intl po lib src doc m4 tests + +EXTRA_DIST = REFERENCES configure.bat OChangeLog Makefile.maint GNUmakefile + +DISTCLEANFILES = intl/libintl.h + +move_if_change = $(srcdir)/config/move-if-change +prev_version_file = $(srcdir)/config/prev-version.txt +release_archive_dir = releases + +# Uploading betas. +hosts = alpha +alpha_host = alpha.gnu.org +alpha_url_dir = gnu/bison + +# Files to update automatically. +wget_files = $(srcdir)/config/config.guess $(srcdir)/config/config.sub $(srcdir)/config/texinfo.tex + +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +DIST_COMMON = README ./stamp-h.in ABOUT-NLS AUTHORS COPYING ChangeLog \ +INSTALL Makefile.am Makefile.in NEWS README-alpha THANKS aclocal.m4 \ +config.hin configure configure.in missing mkinstalldirs + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP_ENV = --best +all: all-redirect +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +$(ACLOCAL_M4): configure.in m4/atconfig.m4 m4/c-bs-a.m4 m4/codeset.m4 \ + m4/error.m4 m4/gettext.m4 m4/glibc21.m4 m4/iconv.m4 \ + m4/isc-posix.m4 m4/lcmessage.m4 m4/m4.m4 m4/malloc.m4 \ + m4/mbstate_t.m4 m4/prereq.m4 m4/progtest.m4 \ + m4/realloc.m4 m4/strerror_r.m4 m4/warning.m4 + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.status: $(srcdir)/configure.in $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) + +config.h: stamp-h + @if test ! -f $@; then \ + rm -f stamp-h; \ + $(MAKE) stamp-h; \ + else :; fi +stamp-h: $(srcdir)/config.hin $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES= CONFIG_HEADERS=config.h:config.hin \ + $(SHELL) ./config.status + @echo timestamp > stamp-h 2> /dev/null +$(srcdir)/config.hin: $(srcdir)/stamp-h.in + @if test ! -f $@; then \ + rm -f $(srcdir)/stamp-h.in; \ + $(MAKE) $(srcdir)/stamp-h.in; \ + else :; fi +$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOHEADER) + @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null + +mostlyclean-hdr: + +clean-hdr: + +distclean-hdr: + -rm -f config.h + +maintainer-clean-hdr: + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. + +@SET_MAKE@ + +all-recursive install-data-recursive install-exec-recursive \ +installdirs-recursive install-recursive uninstall-recursive \ +check-recursive installcheck-recursive info-recursive dvi-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $(MAKEFLAGS); amf=$$2; \ + dot_seen=no; \ + rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ + rev="$$subdir $$rev"; \ + test "$$subdir" = "." && dot_seen=yes; \ + done; \ + test "$$dot_seen" = "no" && rev=". $$rev"; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done -# We don't use $(srcdir) in this rule -# because it is normally used in the master source dir -# in which configure has not been run. -dist: bison.info - echo bison-`sed -e '/version_string/!d' -e 's/[^0-9.]*\([0-9.]*\).*/\1/' -e q version.c` > .fname - -rm -rf `cat .fname` - mkdir `cat .fname` - dst=`cat .fname`; for f in $(DISTFILES); do \ - ln $$f $$dst/$$f || { echo copying $$f; cp -p $$f $$dst/$$f ; } \ +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)config.hin$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.hin $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --with-included-gettext --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +distdir: $(DISTFILES) + @if sed 15q $(srcdir)/NEWS | fgrep -e "$(VERSION)" > /dev/null; then :; else \ + echo "NEWS not updated; not releasing" 1>&2; \ + exit 1; \ + fi + -rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + here=`cd $(top_builddir) && pwd`; \ + top_distdir=`cd $(distdir) && pwd`; \ + distdir=`cd $(distdir) && pwd`; \ + cd $(top_srcdir) \ + && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile + @for file in $(DISTFILES); do \ + d=$(srcdir); \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done + for subdir in $(SUBDIRS); do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + chmod 777 $(distdir)/$$subdir; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ + || exit 1; \ + fi; \ done - tar --gzip -chf `cat .fname`.tar.gz `cat .fname` - -rm -rf `cat .fname` .fname - -bison.info: bison.texinfo - $(MAKEINFO) $(srcdir)/bison.texinfo - -TAGS: *.c *.h - etags *.c *.h - -# This file is different to pass the parser file names to the compiler. -files.o: files.c - $(CC) -c $(PFILES) $(DEFS) $(CPPFLAGS) $(CFLAGS) \ - $(srcdir)/files.c $(OUTPUT_OPTION) - -LR0.o: system.h machine.h new.h gram.h state.h -allocate.o: system.h -closure.o: system.h machine.h new.h gram.h -conflicts.o: system.h machine.h new.h files.h gram.h state.h -derives.o: system.h new.h types.h gram.h -files.o: system.h files.h new.h gram.h -getargs.o: system.h files.h -lalr.o: system.h machine.h types.h state.h new.h gram.h -lex.o: system.h files.h symtab.h lex.h -main.o: system.h machine.h -nullable.o: system.h types.h gram.h new.h -output.o: system.h machine.h new.h files.h gram.h state.h -print.o: system.h machine.h new.h files.h gram.h state.h -reader.o: system.h files.h new.h symtab.h lex.h gram.h -reduce.o: system.h machine.h files.h new.h gram.h -symtab.o: system.h new.h symtab.h gram.h -warshall.o: system.h machine.h - -# Prevent GNU make v3 from overflowing arg limit on SysV. +info-am: +info: info-recursive +dvi-am: +dvi: dvi-recursive +check-am: all-am +check: check-recursive +installcheck-am: +installcheck: installcheck-recursive +all-recursive-am: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +install-exec-am: +install-exec: install-exec-recursive + +install-data-am: +install-data: install-data-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-recursive +uninstall-am: +uninstall: uninstall-recursive +all-am: Makefile config.h +all-redirect: all-recursive-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: installdirs-recursive +installdirs-am: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-recursive + +clean-am: clean-hdr clean-tags clean-generic mostlyclean-am + +clean: clean-recursive + +distclean-am: distclean-hdr distclean-tags distclean-generic clean-am + +distclean: distclean-recursive + -rm -f config.status + +maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-recursive + -rm -f config.status + +.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ +install-data-recursive uninstall-data-recursive install-exec-recursive \ +uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ +all-recursive check-recursive installcheck-recursive info-recursive \ +dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ +maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \ +install-exec-am install-exec install-data-am install-data install-am \ +install uninstall-am uninstall all-redirect all-am all installdirs-am \ +installdirs mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: