X-Git-Url: https://git.saurik.com/bison.git/blobdiff_plain/3ded9a63e320a0f6142c1112b248a7926569d791..ccaf65bc6331dfb0684876a7475c6474b99125ea:/doc/bison.texinfo?ds=sidebyside diff --git a/doc/bison.texinfo b/doc/bison.texinfo index 58186349..e4eff35f 100644 --- a/doc/bison.texinfo +++ b/doc/bison.texinfo @@ -5,9 +5,7 @@ @settitle Bison @value{VERSION} @setchapternewpage odd -@iftex @finalout -@end iftex @c SMALL BOOK version @c This edition has been formatted so that you can format and print it in @@ -23,6 +21,7 @@ @c Check COPYRIGHT dates. should be updated in the titlepage, ifinfo @c titlepage; should NOT be changed in the GPL. --mew +@c FIXME: I don't understand this `iftex'. Obsolete? --akim. @iftex @syncodeindex fn cp @syncodeindex vr cp @@ -154,7 +153,7 @@ Reference sections: * Error Recovery:: Writing rules for error recovery. * Context Dependency:: What to do if your language syntax is too messy for Bison to handle straightforwardly. -* Debugging:: Debugging Bison parsers that parse wrong. +* Debugging:: Understanding or debugging Bison parsers. * Invocation:: How to run Bison (to produce the parser source file). * Table of Symbols:: All the keywords of the Bison language are explained. * Glossary:: Basic concepts are explained. @@ -283,6 +282,7 @@ The Bison Parser Algorithm * Parser States:: The parser is a finite-state-machine with stack. * Reduce/Reduce:: When two rules are applicable in the same situation. * Mystery Conflicts:: Reduce/reduce conflicts that look unjustified. +* Generalized LR Parsing:: Parsing arbitrary context-free grammars. * Stack Overflow:: What happens when stack gets full. How to avoid it. Operator Precedence @@ -299,6 +299,11 @@ Handling Context Dependencies * Tie-in Recovery:: Lexical tie-ins have implications for how error recovery rules must be written. +Understanding or Debugging Your Parser + +* Understanding:: Understanding the structure of your parser. +* Tracing:: Tracing the execution of your parser. + Invoking Bison * Bison Options:: All the options described in detail, @@ -384,6 +389,7 @@ use Bison or Yacc, we suggest you start by reading this chapter carefully. a semantic value (the value of an integer, the name of an identifier, etc.). * Semantic Actions:: Each rule can have an action containing C code. +* GLR Parsers:: Writing parsers for general context-free languages * Locations Overview:: Tracking Locations. * Bison Parser:: What are Bison's input and output, how is the output used? @@ -414,8 +420,12 @@ specify the language Algol 60. Any grammar expressed in BNF is a context-free grammar. The input to Bison is essentially machine-readable BNF. -Not all context-free languages can be handled by Bison, only those -that are LALR(1). In brief, this means that it must be possible to +@cindex LALR(1) grammars +@cindex LR(1) grammars +There are various important subclasses of context-free grammar. Although it +can handle almost all context-free grammars, Bison is optimized for what +are called LALR(1) grammars. +In brief, in these grammars, it must be possible to tell how to parse any portion of an input string with just a single token of look-ahead. Strictly speaking, that is a description of an LR(1) grammar, and LALR(1) involves additional restrictions that are @@ -423,6 +433,24 @@ hard to explain simply; but it is rare in actual practice to find an LR(1) grammar that fails to be LALR(1). @xref{Mystery Conflicts, , Mysterious Reduce/Reduce Conflicts}, for more information on this. +@cindex GLR parsing +@cindex generalized LR (GLR) parsing +@cindex ambiguous grammars +@cindex non-deterministic parsing +Parsers for LALR(1) grammars are @dfn{deterministic}, meaning roughly that +the next grammar rule to apply at any point in the input is uniquely +determined by the preceding input and a fixed, finite portion (called +a @dfn{look-ahead}) of the remaining input. +A context-free grammar can be @dfn{ambiguous}, meaning that +there are multiple ways to apply the grammar rules to get the some inputs. +Even unambiguous grammars can be @dfn{non-deterministic}, meaning that no +fixed look-ahead always suffices to determine the next grammar rule to apply. +With the proper declarations, Bison is also able to parse these more general +context-free grammars, using a technique known as GLR parsing (for +Generalized LR). Bison's GLR parsers are able to handle any context-free +grammar for which the number of possible parses of any given string +is finite. + @cindex symbols (abstract) @cindex token @cindex syntactic grouping @@ -628,6 +656,180 @@ expr: expr '+' expr @{ $$ = $1 + $3; @} The action says how to produce the semantic value of the sum expression from the values of the two subexpressions. +@node GLR Parsers +@section Writing GLR Parsers +@cindex GLR parsing +@cindex generalized LR (GLR) parsing +@findex %glr-parser +@cindex conflicts +@cindex shift/reduce conflicts + +In some grammars, there will be cases where Bison's standard LALR(1) +parsing algorithm cannot decide whether to apply a certain grammar rule +at a given point. That is, it may not be able to decide (on the basis +of the input read so far) which of two possible reductions (applications +of a grammar rule) applies, or whether to apply a reduction or read more +of the input and apply a reduction later in the input. These are known +respectively as @dfn{reduce/reduce} conflicts (@pxref{Reduce/Reduce}), +and @dfn{shift/reduce} conflicts (@pxref{Shift/Reduce}). + +To use a grammar that is not easily modified to be LALR(1), a more +general parsing algorithm is sometimes necessary. If you include +@code{%glr-parser} among the Bison declarations in your file +(@pxref{Grammar Outline}), the result will be a Generalized LR (GLR) +parser. These parsers handle Bison grammars that contain no unresolved +conflicts (i.e., after applying precedence declarations) identically to +LALR(1) parsers. However, when faced with unresolved shift/reduce and +reduce/reduce conflicts, GLR parsers use the simple expedient of doing +both, effectively cloning the parser to follow both possibilities. Each +of the resulting parsers can again split, so that at any given time, +there can be any number of possible parses being explored. The parsers +proceed in lockstep; that is, all of them consume (shift) a given input +symbol before any of them proceed to the next. Each of the cloned +parsers eventually meets one of two possible fates: either it runs into +a parsing error, in which case it simply vanishes, or it merges with +another parser, because the two of them have reduced the input to an +identical set of symbols. + +During the time that there are multiple parsers, semantic actions are +recorded, but not performed. When a parser disappears, its recorded +semantic actions disappear as well, and are never performed. When a +reduction makes two parsers identical, causing them to merge, Bison +records both sets of semantic actions. Whenever the last two parsers +merge, reverting to the single-parser case, Bison resolves all the +outstanding actions either by precedences given to the grammar rules +involved, or by performing both actions, and then calling a designated +user-defined function on the resulting values to produce an arbitrary +merged result. + +Let's consider an example, vastly simplified from C++. + +@example +%@{ + #define YYSTYPE const char* +%@} + +%token TYPENAME ID + +%right '=' +%left '+' + +%glr-parser + +%% + +prog : + | prog stmt @{ printf ("\n"); @} + ; + +stmt : expr ';' %dprec 1 + | decl %dprec 2 + ; + +expr : ID @{ printf ("%s ", $$); @} + | TYPENAME '(' expr ')' + @{ printf ("%s ", $1); @} + | expr '+' expr @{ printf ("+ "); @} + | expr '=' expr @{ printf ("= "); @} + ; + +decl : TYPENAME declarator ';' + @{ printf ("%s ", $1); @} + | TYPENAME declarator '=' expr ';' + @{ printf ("%s ", $1); @} + ; + +declarator : ID @{ printf ("\"%s\" ", $1); @} + | '(' declarator ')' + ; +@end example + +@noindent +This models a problematic part of the C++ grammar---the ambiguity between +certain declarations and statements. For example, + +@example +T (x) = y+z; +@end example + +@noindent +parses as either an @code{expr} or a @code{stmt} +(assuming that @samp{T} is recognized as a TYPENAME and @samp{x} as an ID). +Bison detects this as a reduce/reduce conflict between the rules +@code{expr : ID} and @code{declarator : ID}, which it cannot resolve at the +time it encounters @code{x} in the example above. The two @code{%dprec} +declarations, however, give precedence to interpreting the example as a +@code{decl}, which implies that @code{x} is a declarator. +The parser therefore prints + +@example +"x" y z + T +@end example + +Consider a different input string for this parser: + +@example +T (x) + y; +@end example + +@noindent +Here, there is no ambiguity (this cannot be parsed as a declaration). +However, at the time the Bison parser encounters @code{x}, it does not +have enough information to resolve the reduce/reduce conflict (again, +between @code{x} as an @code{expr} or a @code{declarator}). In this +case, no precedence declaration is used. Instead, the parser splits +into two, one assuming that @code{x} is an @code{expr}, and the other +assuming @code{x} is a @code{declarator}. The second of these parsers +then vanishes when it sees @code{+}, and the parser prints + +@example +x T y + +@end example + +Suppose that instead of resolving the ambiguity, you wanted to see all +the possibilities. For this purpose, we must @dfn{merge} the semantic +actions of the two possible parsers, rather than choosing one over the +other. To do so, you could change the declaration of @code{stmt} as +follows: + +@example +stmt : expr ';' %merge + | decl %merge + ; +@end example + +@noindent + +and define the @code{stmtMerge} function as: + +@example +static YYSTYPE stmtMerge (YYSTYPE x0, YYSTYPE x1) +@{ + printf (" "); + return ""; +@} +@end example + +@noindent +with an accompanying forward declaration +in the C declarations at the beginning of the file: + +@example +%@{ + #define YYSTYPE const char* + static YYSTYPE stmtMerge (YYSTYPE x0, YYSTYPE x1); +%@} +@end example + +@noindent +With these declarations, the resulting parser will parse the first example +as both an @code{expr} and a @code{decl}, and print + +@example +"x" y z + T x T y z + = +@end example + + @node Locations Overview @section Locations @cindex location @@ -707,9 +909,9 @@ In some cases the Bison parser file includes system headers, and in those cases your code should respect the identifiers reserved by those headers. On some non-@sc{gnu} hosts, @code{}, @code{}, and @code{} are included as needed to -declare memory allocators and related types. -Other system headers may be included if you define @code{YYDEBUG} to a -nonzero value (@pxref{Debugging, ,Debugging Your Parser}). +declare memory allocators and related types. Other system headers may +be included if you define @code{YYDEBUG} to a nonzero value +(@pxref{Tracing, ,Tracing Your Parser}). @node Stages @section Stages in Using Bison @@ -766,7 +968,7 @@ general form of a Bison grammar file is as follows: @example %@{ -@var{Prologue (declarations)} +@var{Prologue} %@} @var{Bison declarations} @@ -774,7 +976,7 @@ general form of a Bison grammar file is as follows: %% @var{Grammar rules} %% -@var{Epilogue (additional code)} +@var{Epilogue} @end example @noindent @@ -2043,7 +2245,7 @@ Comments enclosed in @samp{/* @dots{} */} may appear in any of the sections. @cindex Prologue @cindex declarations -The @var{prologue} section contains macro definitions and +The @var{Prologue} section contains macro definitions and declarations of functions and variables that are used in the actions in the grammar rules. These are copied to the beginning of the parser file so that they precede the definition of @code{yyparse}. You can use @@ -2051,6 +2253,33 @@ that they precede the definition of @code{yyparse}. You can use need any C declarations, you may omit the @samp{%@{} and @samp{%@}} delimiters that bracket this section. +You may have more than one @var{Prologue} section, intermixed with the +@var{Bison declarations}. This allows you to have C and Bison +declarations that refer to each other. For example, the @code{%union} +declaration may use types defined in a header file, and you may wish to +prototype functions that take arguments of type @code{YYSTYPE}. This +can be done with two @var{Prologue} blocks, one before and one after the +@code{%union} declaration. + +@smallexample +%@{ +#include +#include "ptypes.h" +%@} + +%union @{ + long n; + tree t; /* @r{@code{tree} is defined in @file{ptypes.h}.} */ +@} + +%@{ +static void yyprint(FILE *, int, YYSTYPE); +#define YYPRINT(F, N, L) yyprint(F, N, L) +%@} + +@dots{} +@end smallexample + @node Bison Declarations @subsection The Bison Declarations Section @cindex Bison declarations (introduction) @@ -2079,8 +2308,8 @@ if it is the first thing in the file. @cindex epilogue @cindex C code, section for additional -The @var{epilogue} is copied verbatim to the end of the parser file, just as -the @var{prologue} is copied to the beginning. This is the most convenient +The @var{Epilogue} is copied verbatim to the end of the parser file, just as +the @var{Prologue} is copied to the beginning. This is the most convenient place to put anything that you want to have in the parser file but which need not come before the definition of @code{yyparse}. For example, the definitions of @code{yylex} and @code{yyerror} often go here. @@ -2218,11 +2447,9 @@ files before compiling them. The symbol @code{error} is a terminal symbol reserved for error recovery (@pxref{Error Recovery}); you shouldn't use it for any other purpose. -In particular, @code{yylex} should never return this value. -The default value of the error token is 256, so in the -unlikely event that you need to use a character token with numeric -value 256 you must reassign the error token's value with a -@code{%token} declaration. +In particular, @code{yylex} should never return this value. The default +value of the error token is 256, unless you explicitly assigned 256 to +one of your tokens with a @code{%token} declaration. @node Rules @section Syntax of Grammar Rules @@ -2353,14 +2580,14 @@ expseq1: exp @end example @noindent -Any kind of sequence can be defined using either left recursion or -right recursion, but you should always use left recursion, because it -can parse a sequence of any number of elements with bounded stack -space. Right recursion uses up space on the Bison stack in proportion -to the number of elements in the sequence, because all the elements -must be shifted onto the stack before the rule can be applied even -once. @xref{Algorithm, ,The Bison Parser Algorithm }, for -further explanation of this. +Any kind of sequence can be defined using either left recursion or right +recursion, but you should always use left recursion, because it can +parse a sequence of any number of elements with bounded stack space. +Right recursion uses up space on the Bison stack in proportion to the +number of elements in the sequence, because all the elements must be +shifted onto the stack before the rule can be applied even once. +@xref{Algorithm, ,The Bison Parser Algorithm}, for further explanation +of this. @cindex mutual recursion @dfn{Indirect} or @dfn{mutual} recursion occurs when the result of the @@ -2884,13 +3111,28 @@ the location of the grouping (the result of the computation). The second one is an array holding locations of all right hand side elements of the rule being matched. The last one is the size of the right hand side rule. -By default, it is defined this way: +By default, it is defined this way for simple LALR(1) parsers: + +@example +@group +#define YYLLOC_DEFAULT(Current, Rhs, N) \ + Current.first_line = Rhs[1].first_line; \ + Current.first_column = Rhs[1].first_column; \ + Current.last_line = Rhs[N].last_line; \ + Current.last_column = Rhs[N].last_column; +@end group +@end example + +@noindent +and like this for GLR parsers: @example @group -#define YYLLOC_DEFAULT(Current, Rhs, N) \ - Current.last_line = Rhs[N].last_line; \ - Current.last_column = Rhs[N].last_column; +#define YYLLOC_DEFAULT(Current, Rhs, N) \ + Current.first_line = YYRHSLOC(Rhs,1).first_line; \ + Current.first_column = YYRHSLOC(Rhs,1).first_column; \ + Current.last_line = YYRHSLOC(Rhs,N).last_line; \ + Current.last_column = YYRHSLOC(Rhs,N).last_column; @end group @end example @@ -2902,12 +3144,8 @@ All arguments are free of side-effects. However, only the first one (the result) should be modified by @code{YYLLOC_DEFAULT}. @item -Before @code{YYLLOC_DEFAULT} is executed, the output parser sets @code{@@$} -to @code{@@1}. - -@item -For consistency with semantic actions, valid indexes for the location array -range from 1 to @var{n}. +For consistency with semantic actions, valid indexes for the location +array range from 1 to @var{n}. @end itemize @node Declarations @@ -3280,7 +3518,7 @@ directives: @item %debug In the parser file, define the macro @code{YYDEBUG} to 1 if it is not already defined, so that the debugging facilities are compiled. -@xref{Debugging, ,Debugging Your Parser}. +@xref{Tracing, ,Tracing Your Parser}. @item %defines Write an extra output file containing macro definitions for the token @@ -3390,17 +3628,10 @@ The number of parser states (@pxref{Parser States}). @item %verbose Write an extra output file containing verbose descriptions of the parser states and what is done for each type of look-ahead token in -that state. +that state. @xref{Understanding, , Understanding Your Parser}, for more +information. -This file also describes all the conflicts, both those resolved by -operator precedence and the unresolved ones. -The file's name is made by removing @samp{.tab.c} or @samp{.c} from -the parser output file name, and adding @samp{.output} instead. - -Therefore, if the input file is @file{foo.y}, then the parser file is -called @file{foo.tab.c} by default. As a consequence, the verbose -output file is called @file{foo.output}. @item %yacc Pretend the option @option{--yacc} was given, i.e., imitate Yacc, @@ -3870,6 +4101,7 @@ Return immediately from @code{yyparse}, indicating success. @findex YYBACKUP Unshift a token. This macro is allowed only for rules that reduce a single value, and only when there is no look-ahead token. +It is also disallowed in GLR parsers. It installs a look-ahead token with token type @var{token} and semantic value @var{value}; then it discards the value that was going to be reduced by this rule. @@ -4010,6 +4242,7 @@ This kind of parser is known in the literature as a bottom-up parser. * Parser States:: The parser is a finite-state-machine with stack. * Reduce/Reduce:: When two rules are applicable in the same situation. * Mystery Conflicts:: Reduce/reduce conflicts that look unjustified. +* Generalized LR Parsing:: Parsing arbitrary context-free grammars. * Stack Overflow:: What happens when stack gets full. How to avoid it. @end menu @@ -4604,6 +4837,82 @@ return_spec: ; @end example +@node Generalized LR Parsing +@section Generalized LR (GLR) Parsing +@cindex GLR parsing +@cindex generalized LR (GLR) parsing +@cindex ambiguous grammars +@cindex non-deterministic parsing + +Bison produces @emph{deterministic} parsers that choose uniquely +when to reduce and which reduction to apply +based on a summary of the preceding input and on one extra token of lookahead. +As a result, normal Bison handles a proper subset of the family of +context-free languages. +Ambiguous grammars, since they have strings with more than one possible +sequence of reductions cannot have deterministic parsers in this sense. +The same is true of languages that require more than one symbol of +lookahead, since the parser lacks the information necessary to make a +decision at the point it must be made in a shift-reduce parser. +Finally, as previously mentioned (@pxref{Mystery Conflicts}), +there are languages where Bison's particular choice of how to +summarize the input seen so far loses necessary information. + +When you use the @samp{%glr-parser} declaration in your grammar file, +Bison generates a parser that uses a different algorithm, called +Generalized LR (or GLR). A Bison GLR parser uses the same basic +algorithm for parsing as an ordinary Bison parser, but behaves +differently in cases where there is a shift-reduce conflict that has not +been resolved by precedence rules (@pxref{Precedence}) or a +reduce-reduce conflict. When a GLR parser encounters such a situation, it +effectively @emph{splits} into a several parsers, one for each possible +shift or reduction. These parsers then proceed as usual, consuming +tokens in lock-step. Some of the stacks may encounter other conflicts +and split further, with the result that instead of a sequence of states, +a Bison GLR parsing stack is what is in effect a tree of states. + +In effect, each stack represents a guess as to what the proper parse +is. Additional input may indicate that a guess was wrong, in which case +the appropriate stack silently disappears. Otherwise, the semantics +actions generated in each stack are saved, rather than being executed +immediately. When a stack disappears, its saved semantic actions never +get executed. When a reduction causes two stacks to become equivalent, +their sets of semantic actions are both saved with the state that +results from the reduction. We say that two stacks are equivalent +when they both represent the same sequence of states, +and each pair of corresponding states represents a +grammar symbol that produces the same segment of the input token +stream. + +Whenever the parser makes a transition from having multiple +states to having one, it reverts to the normal LALR(1) parsing +algorithm, after resolving and executing the saved-up actions. +At this transition, some of the states on the stack will have semantic +values that are sets (actually multisets) of possible actions. The +parser tries to pick one of the actions by first finding one whose rule +has the highest dynamic precedence, as set by the @samp{%dprec} +declaration. Otherwise, if the alternative actions are not ordered by +precedence, but there the same merging function is declared for both +rules by the @samp{%merge} declaration, +Bison resolves and evaluates both and then calls the merge function on +the result. Otherwise, it reports an ambiguity. + +It is possible to use a data structure for the GLR parsing tree that +permits the processing of any LALR(1) grammar in linear time (in the +size of the input), any unambiguous (not necessarily LALR(1)) grammar in +quadratic worst-case time, and any general (possibly ambiguous) +context-free grammar in cubic worst-case time. However, Bison currently +uses a simpler data structure that requires time proportional to the +length of the input times the maximum number of stacks required for any +prefix of the input. Thus, really ambiguous or non-deterministic +grammars can require exponential time and space to process. Such badly +behaving examples, however, are not generally of practical interest. +Usually, non-determinism in a grammar is local---the parser is ``in +doubt'' only for a few tokens at a time. Therefore, the current data +structure should generally be adequate. On LALR(1) portions of a +grammar, in particular, it is only slightly slower than with the default +Bison parser. + @node Stack Overflow @section Stack Overflow, and How to Avoid It @cindex stack overflow @@ -4958,8 +5267,414 @@ make sure your error recovery rules are not of this kind. Each rule must be such that you can be sure that it always will, or always won't, have to clear the flag. +@c ================================================== Debugging Your Parser + @node Debugging @chapter Debugging Your Parser + +Developing a parser can be a challenge, especially if you don't +understand the algorithm (@pxref{Algorithm, ,The Bison Parser +Algorithm}). Even so, sometimes a detailed description of the automaton +can help (@pxref{Understanding, , Understanding Your Parser}), or +tracing the execution of the parser can give some insight on why it +behaves improperly (@pxref{Tracing, , Tracing Your Parser}). + +@menu +* Understanding:: Understanding the structure of your parser. +* Tracing:: Tracing the execution of your parser. +@end menu + +@node Understanding +@section Understanding Your Parser + +As documented elsewhere (@pxref{Algorithm, ,The Bison Parser Algorithm}) +Bison parsers are @dfn{shift/reduce automata}. In some cases (much more +frequent than one would hope), looking at this automaton is required to +tune or simply fix a parser. Bison provides two different +representation of it, either textually or graphically (as a @sc{vcg} +file). + +The textual file is generated when the options @option{--report} or +@option{--verbose} are specified, see @xref{Invocation, , Invoking +Bison}. Its name is made by removing @samp{.tab.c} or @samp{.c} from +the parser output file name, and adding @samp{.output} instead. +Therefore, if the input file is @file{foo.y}, then the parser file is +called @file{foo.tab.c} by default. As a consequence, the verbose +output file is called @file{foo.output}. + +The following grammar file, @file{calc.y}, will be used in the sequel: + +@example +%token NUM STR +%left '+' '-' +%left '*' +%% +exp: exp '+' exp + | exp '-' exp + | exp '*' exp + | exp '/' exp + | NUM + ; +useless: STR; +%% +@end example + +@command{bison} reports that @samp{calc.y contains 1 useless nonterminal +and 1 useless rule} and that @samp{calc.y contains 7 shift/reduce +conflicts}. When given @option{--report=state}, in addition to +@file{calc.tab.c}, it creates a file @file{calc.output} with contents +detailed below. The order of the output and the exact presentation +might vary, but the interpretation is the same. + +The first section includes details on conflicts that were solved thanks +to precedence and/or associativity: + +@example +Conflict in state 8 between rule 2 and token '+' resolved as reduce. +Conflict in state 8 between rule 2 and token '-' resolved as reduce. +Conflict in state 8 between rule 2 and token '*' resolved as shift. +@exdent @dots{} +@end example + +@noindent +The next section lists states that still have conflicts. + +@example +State 8 contains 1 shift/reduce conflict. +State 9 contains 1 shift/reduce conflict. +State 10 contains 1 shift/reduce conflict. +State 11 contains 4 shift/reduce conflicts. +@end example + +@noindent +@cindex token, useless +@cindex useless token +@cindex nonterminal, useless +@cindex useless nonterminal +@cindex rule, useless +@cindex useless rule +The next section reports useless tokens, nonterminal and rules. Useless +nonterminals and rules are removed in order to produce a smaller parser, +but useless tokens are preserved, since they might be used by the +scanner (note the difference between ``useless'' and ``not used'' +below): + +@example +Useless nonterminals: + useless + +Terminals which are not used: + STR + +Useless rules: +#6 useless: STR; +@end example + +@noindent +The next section reproduces the exact grammar that Bison used: + +@example +Grammar + + Number, Line, Rule + 0 5 $axiom -> exp $ + 1 5 exp -> exp '+' exp + 2 6 exp -> exp '-' exp + 3 7 exp -> exp '*' exp + 4 8 exp -> exp '/' exp + 5 9 exp -> NUM +@end example + +@noindent +and reports the uses of the symbols: + +@example +Terminals, with rules where they appear + +$ (0) 0 +'*' (42) 3 +'+' (43) 1 +'-' (45) 2 +'/' (47) 4 +error (256) +NUM (258) 5 + +Nonterminals, with rules where they appear + +$axiom (8) + on left: 0 +exp (9) + on left: 1 2 3 4 5, on right: 0 1 2 3 4 +@end example + +@noindent +@cindex item +@cindex pointed rule +@cindex rule, pointed +Bison then proceeds onto the automaton itself, describing each state +with it set of @dfn{items}, also known as @dfn{pointed rules}. Each +item is a production rule together with a point (marked by @samp{.}) +that the input cursor. + +@example +state 0 + + $axiom -> . exp $ (rule 0) + + NUM shift, and go to state 1 + + exp go to state 2 +@end example + +This reads as follows: ``state 0 corresponds to being at the very +beginning of the parsing, in the initial rule, right before the start +symbol (here, @code{exp}). When the parser returns to this state right +after having reduced a rule that produced an @code{exp}, the control +flow jumps to state 2. If there is no such transition on a nonterminal +symbol, and the lookahead is a @code{NUM}, then this token is shifted on +the parse stack, and the control flow jumps to state 1. Any other +lookahead triggers a parse error.'' + +@cindex core, item set +@cindex item set core +@cindex kernel, item set +@cindex item set core +Even though the only active rule in state 0 seems to be rule 0, the +report lists @code{NUM} as a lookahead symbol because @code{NUM} can be +at the beginning of any rule deriving an @code{exp}. By default Bison +reports the so-called @dfn{core} or @dfn{kernel} of the item set, but if +you want to see more detail you can invoke @command{bison} with +@option{--report=itemset} to list all the items, include those that can +be derived: + +@example +state 0 + + $axiom -> . exp $ (rule 0) + exp -> . exp '+' exp (rule 1) + exp -> . exp '-' exp (rule 2) + exp -> . exp '*' exp (rule 3) + exp -> . exp '/' exp (rule 4) + exp -> . NUM (rule 5) + + NUM shift, and go to state 1 + + exp go to state 2 +@end example + +@noindent +In the state 1... + +@example +state 1 + + exp -> NUM . (rule 5) + + $default reduce using rule 5 (exp) +@end example + +@noindent +the rule 5, @samp{exp: NUM;}, is completed. Whatever the lookahead +(@samp{$default}), the parser will reduce it. If it was coming from +state 0, then, after this reduction it will return to state 0, and will +jump to state 2 (@samp{exp: go to state 2}). + +@example +state 2 + + $axiom -> exp . $ (rule 0) + exp -> exp . '+' exp (rule 1) + exp -> exp . '-' exp (rule 2) + exp -> exp . '*' exp (rule 3) + exp -> exp . '/' exp (rule 4) + + $ shift, and go to state 3 + '+' shift, and go to state 4 + '-' shift, and go to state 5 + '*' shift, and go to state 6 + '/' shift, and go to state 7 +@end example + +@noindent +In state 2, the automaton can only shift a symbol. For instance, +because of the item @samp{exp -> exp . '+' exp}, if the lookahead if +@samp{+}, it will be shifted on the parse stack, and the automaton +control will jump to state 4, corresponding to the item @samp{exp -> exp +'+' . exp}. Since there is no default action, any other token than +those listed above will trigger a parse error. + +The state 3 is named the @dfn{final state}, or the @dfn{accepting +state}: + +@example +state 3 + + $axiom -> exp $ . (rule 0) + + $default accept +@end example + +@noindent +the initial rule is completed (the start symbol and the end +of input were read), the parsing exits successfully. + +The interpretation of states 4 to 7 is straightforward, and is left to +the reader. + +@example +state 4 + + exp -> exp '+' . exp (rule 1) + + NUM shift, and go to state 1 + + exp go to state 8 + +state 5 + + exp -> exp '-' . exp (rule 2) + + NUM shift, and go to state 1 + + exp go to state 9 + +state 6 + + exp -> exp '*' . exp (rule 3) + + NUM shift, and go to state 1 + + exp go to state 10 + +state 7 + + exp -> exp '/' . exp (rule 4) + + NUM shift, and go to state 1 + + exp go to state 11 +@end example + +As was announced in beginning of the report, @samp{State 8 contains 1 +shift/reduce conflict}: + +@example +state 8 + + exp -> exp . '+' exp (rule 1) + exp -> exp '+' exp . (rule 1) + exp -> exp . '-' exp (rule 2) + exp -> exp . '*' exp (rule 3) + exp -> exp . '/' exp (rule 4) + + '*' shift, and go to state 6 + '/' shift, and go to state 7 + + '/' [reduce using rule 1 (exp)] + $default reduce using rule 1 (exp) +@end example + +Indeed, there are two actions associated to the lookahead @samp{/}: +either shifting (and going to state 7), or reducing rule 1. The +conflict means that either the grammar is ambiguous, or the parser lacks +information to make the right decision. Indeed the grammar is +ambiguous, as, since we did not specify the precedence of @samp{/}, the +sentence @samp{NUM + NUM / NUM} can be parsed as @samp{NUM + (NUM / +NUM)}, which corresponds to shifting @samp{/}, or as @samp{(NUM + NUM) / +NUM}, which corresponds to reducing rule 1. + +Because in LALR(1) parsing a single decision can be made, Bison +arbitrarily chose to disable the reduction, see @ref{Shift/Reduce, , +Shift/Reduce Conflicts}. Discarded actions are reported in between +square brackets. + +Note that all the previous states had a single possible action: either +shifting the next token and going to the corresponding state, or +reducing a single rule. In the other cases, i.e., when shifting +@emph{and} reducing is possible or when @emph{several} reductions are +possible, the lookahead is required to select the action. State 8 is +one such state: if the lookahead is @samp{*} or @samp{/} then the action +is shifting, otherwise the action is reducing rule 1. In other words, +the first two items, corresponding to rule 1, are not eligible when the +lookahead is @samp{*}, since we specified that @samp{*} has higher +precedence that @samp{+}. More generally, some items are eligible only +with some set of possible lookaheads. When run with +@option{--report=lookahead}, Bison specifies these lookaheads: + +@example +state 8 + + exp -> exp . '+' exp [$, '+', '-', '/'] (rule 1) + exp -> exp '+' exp . [$, '+', '-', '/'] (rule 1) + exp -> exp . '-' exp (rule 2) + exp -> exp . '*' exp (rule 3) + exp -> exp . '/' exp (rule 4) + + '*' shift, and go to state 6 + '/' shift, and go to state 7 + + '/' [reduce using rule 1 (exp)] + $default reduce using rule 1 (exp) +@end example + +The remaining states are similar: + +@example +state 9 + + exp -> exp . '+' exp (rule 1) + exp -> exp . '-' exp (rule 2) + exp -> exp '-' exp . (rule 2) + exp -> exp . '*' exp (rule 3) + exp -> exp . '/' exp (rule 4) + + '*' shift, and go to state 6 + '/' shift, and go to state 7 + + '/' [reduce using rule 2 (exp)] + $default reduce using rule 2 (exp) + +state 10 + + exp -> exp . '+' exp (rule 1) + exp -> exp . '-' exp (rule 2) + exp -> exp . '*' exp (rule 3) + exp -> exp '*' exp . (rule 3) + exp -> exp . '/' exp (rule 4) + + '/' shift, and go to state 7 + + '/' [reduce using rule 3 (exp)] + $default reduce using rule 3 (exp) + +state 11 + + exp -> exp . '+' exp (rule 1) + exp -> exp . '-' exp (rule 2) + exp -> exp . '*' exp (rule 3) + exp -> exp . '/' exp (rule 4) + exp -> exp '/' exp . (rule 4) + + '+' shift, and go to state 4 + '-' shift, and go to state 5 + '*' shift, and go to state 6 + '/' shift, and go to state 7 + + '+' [reduce using rule 4 (exp)] + '-' [reduce using rule 4 (exp)] + '*' [reduce using rule 4 (exp)] + '/' [reduce using rule 4 (exp)] + $default reduce using rule 4 (exp) +@end example + +@noindent +Observe that state 11 contains conflicts due to the lack of precedence +of @samp{/} wrt @samp{+}, @samp{-}, and @samp{*}, but also because the +associativity of @samp{/} is not specified. + + +@node Tracing +@section Tracing Your Parser @findex yydebug @cindex debugging @cindex tracing the parser @@ -5063,6 +5778,8 @@ yyprint (FILE *file, int type, YYSTYPE value) @} @end smallexample +@c ================================================= Invoking Bison + @node Invocation @chapter Invoking Bison @cindex invoking Bison @@ -5104,7 +5821,6 @@ will produce @file{output.c++} and @file{outfile.h++}. @menu * Bison Options:: All the options described in detail, in alphabetical order by short options. -* Environment Variables:: Variables which affect Bison execution. * Option Cross Key:: Alphabetical list of long options. * VMS Invocation:: Bison command syntax on VMS. @end menu @@ -5162,7 +5878,7 @@ you are developing Bison. @itemx --debug In the parser file, define the macro @code{YYDEBUG} to 1 if it is not already defined, so that the debugging facilities are compiled. -@xref{Debugging, ,Debugging Your Parser}. +@xref{Tracing, ,Tracing Your Parser}. @item --locations Pretend that @code{%locations} was specified. @xref{Decl Summary}. @@ -5208,6 +5924,27 @@ Same as above, but save in the file @var{defines-file}. Pretend that @code{%verbose} was specified, i.e, specify prefix to use for all Bison output file names. @xref{Decl Summary}. +@item -r @var{things} +@itemx --report=@var{things} +Write an extra output file containing verbose description of the comma +separated list of @var{things} among: + +@table @code +@item state +Description of the grammar, conflicts (resolved and unresolved), and +LALR automaton. + +@item lookahead +Implies @code{state} and augments the description of the automaton with +each rule's lookahead set. + +@item itemset +Implies @code{state} and augments the description of the automaton with +the full set of items for each state, instead of its core only. +@end table + +For instance, on the following grammar + @item -v @itemx --verbose Pretend that @code{%verbose} was specified, i.e, write an extra output @@ -5232,31 +5969,6 @@ difference is that it has an optionnal argument which is the name of the output graph filename. @end table -@node Environment Variables -@section Environment Variables -@cindex environment variables -@cindex BISON_HAIRY -@cindex BISON_SIMPLE - -Here is a list of environment variables which affect the way Bison -runs. - -@table @samp -@item BISON_SIMPLE -@itemx BISON_HAIRY -Much of the parser generated by Bison is copied verbatim from a file -called @file{bison.simple}. If Bison cannot find that file, or if you -would like to direct Bison to use a different copy, setting the -environment variable @code{BISON_SIMPLE} to the path of the file will -cause Bison to use that copy instead. - -When the @samp{%semantic-parser} declaration is used, Bison copies from -a file called @file{bison.hairy} instead. The location of this file can -also be specified or overridden in a similar fashion, with the -@code{BISON_HAIRY} environment variable. - -@end table - @node Option Cross Key @section Option Cross Key @@ -5377,8 +6089,8 @@ Macro to discard a value from the parser stack and fake a look-ahead token. @xref{Action Features, ,Special Features for Use in Actions}. @item YYDEBUG -Macro to define to equip the parser with tracing code. @xref{Debugging, -,Debugging Your Parser}. +Macro to define to equip the parser with tracing code. @xref{Tracing, +,Tracing Your Parser}. @item YYERROR Macro to pretend that a syntax error has just been detected: call @@ -5442,7 +6154,7 @@ look-ahead token. @xref{Error Recovery}. @item yydebug External integer variable set to zero by default. If @code{yydebug} is given a nonzero value, the parser will output information on input -symbols and parser action. @xref{Debugging, ,Debugging Your Parser}. +symbols and parser action. @xref{Tracing, ,Tracing Your Parser}. @item yyerrok Macro to cause parser to recover immediately to its normal mode @@ -5489,10 +6201,17 @@ Equip the parser for debugging. @xref{Decl Summary}. Bison declaration to create a header file meant for the scanner. @xref{Decl Summary}. +@item %dprec +Bison declaration to assign a precedence to a rule that is used at parse +time to resolve reduce/reduce conflicts. @xref{GLR Parsers}. + @item %file-prefix="@var{prefix}" -Bison declaration to set tge prefix of the output files. @xref{Decl +Bison declaration to set the prefix of the output files. @xref{Decl Summary}. +@item %glr-parser +Bison declaration to produce a GLR parser. @xref{GLR Parsers}. + @c @item %source-extension @c Bison declaration to specify the generated parser output file extension. @c @xref{Decl Summary}. @@ -5505,6 +6224,12 @@ Summary}. Bison declaration to assign left associativity to token(s). @xref{Precedence Decl, ,Operator Precedence}. +@item %merge +Bison declaration to assign a merging function to a rule. If there is a +reduce/reduce conflict with a rule having the same merging function, the +function is applied to the two semantic values to get a single result. +@xref{GLR Parsers}. + @item %name-prefix="@var{prefix}" Bison declaration to rename the external symbols. @xref{Decl Summary}. @@ -5617,6 +6342,13 @@ machine. In the case of the parser, the input is the language being parsed, and the states correspond to various stages in the grammar rules. @xref{Algorithm, ,The Bison Parser Algorithm }. +@item Generalized LR (GLR) +A parsing algorithm that can handle all context-free grammars, including those +that are not LALR(1). It resolves situations that Bison's usual LALR(1) +algorithm cannot by effectively splitting off multiple parsers, trying all +possible parsers, and discarding those that fail in the light of additional +right context. @xref{Generalized LR Parsing, ,Generalized LR Parsing}. + @item Grouping A language construct that is (in general) grammatically divisible; for example, `expression' or `declaration' in C.