# Bison Regressions. -*- Autotest -*-
-# Copyright 2001 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
AT_BANNER([[Regression tests.]])
-## ------------------ ##
-## Duplicate string. ##
-## ------------------ ##
+## ------------------------- ##
+## Early token definitions. ##
+## ------------------------- ##
-AT_SETUP([Duplicate string])
-AT_DATA([duplicate.y],
-[[/* `Bison -v' used to dump core when two tokens are defined with the same
- string, as LE and GE below. */
+AT_SETUP([Early token definitions])
-%token NUM
-%token LE "<="
-%token GE "<="
+# Found in GCJ: they expect the tokens to be defined before the user
+# prologue, so that they can use the token definitions in it.
+AT_DATA([input.y],
+[[%{
+void yyerror (const char *s);
+int yylex (void);
+%}
+
+%union
+{
+ int val;
+};
+%{
+#ifndef MY_TOKEN
+# error "MY_TOKEN not defined."
+#endif
+%}
+%token MY_TOKEN
%%
-exp: '(' exp ')' | NUM ;
+exp: MY_TOKEN;
%%
]])
-AT_CHECK([bison -v duplicate.y -o duplicate.c], 0, ignore, ignore)
+AT_CHECK([bison input.y -o input.c])
+AT_CHECK([$CC $CFLAGS $CPPFLAGS input.c -c])
AT_CLEANUP
-## ------------------------- ##
-## Unresolved SR Conflicts. ##
-## ------------------------- ##
-AT_SETUP([Unresolved SR Conflicts])
+## ---------------- ##
+## Braces parsing. ##
+## ---------------- ##
-AT_DATA([input.y],
-[[%token NUM OP
-%%
-exp: exp OP exp | NUM;
-]])
-
-AT_CHECK([bison input.y -o input.c -v], 0, [],
-[input.y contains 1 shift/reduce conflict.
-])
-# Check the contents of the report.
-AT_CHECK([cat input.output], [],
-[[State 4 contains 1 shift/reduce conflict.
+AT_SETUP([Braces parsing])
-Grammar
-
- Number, Line, Rule
- 1 3 exp -> exp OP exp
- 2 3 exp -> NUM
-
-Terminals, with rules where they appear
-
-$ (-1)
-error (256)
-NUM (257) 2
-OP (258) 1
-
-Nonterminals, with rules where they appear
-
-exp (5)
- on left: 1 2, on right: 1
-
-
-state 0
-
- NUM shift, and go to state 1
+AT_DATA([input.y],
+[[/* Bison used to swallow the character after `}'. */
- exp go to state 2
+%%
+exp: { tests = {{{{{{{{{{}}}}}}}}}}; };
+%%
+]])
+AT_CHECK([bison -v input.y -o input.c])
+AT_CHECK([fgrep 'tests = {{{{{{{{{{}}}}}}}}}};' input.c], 0, [ignore])
-state 1
+AT_CLEANUP
- exp -> NUM . (rule 2)
- $default reduce using rule 2 (exp)
+## ------------------ ##
+## Duplicate string. ##
+## ------------------ ##
+AT_SETUP([Duplicate string])
-state 2
+AT_DATA([input.y],
+[[/* `Bison -v' used to dump core when two tokens are defined with the same
+ string, as LE and GE below. */
- exp -> exp . OP exp (rule 1)
+%token NUM
+%token LE "<="
+%token GE "<="
- $ go to state 5
- OP shift, and go to state 3
+%%
+exp: '(' exp ')' | NUM ;
+%%
+]])
+AT_CHECK([bison -v input.y -o input.c], 0, [],
+[[input.y:6: warning: symbol `"<="' used more than once as a literal string
+]])
+AT_CLEANUP
-state 3
- exp -> exp OP . exp (rule 1)
+## ------------------- ##
+## Rule Line Numbers. ##
+## ------------------- ##
- NUM shift, and go to state 1
+AT_SETUP([Rule Line Numbers])
- exp go to state 4
+AT_KEYWORDS([report])
+AT_DATA([input.y],
+[[%%
+expr:
+'a'
+{
-state 4
+}
- exp -> exp . OP exp (rule 1)
- exp -> exp OP exp . (rule 1)
+'b'
- OP shift, and go to state 3
+{
- OP [reduce using rule 1 (exp)]
- $default reduce using rule 1 (exp)
+}
+|
-state 5
+{
- $ go to state 6
+}
+'c'
-state 6
+{
- $default accept
+};
]])
-AT_CLEANUP
-
+AT_CHECK([bison input.y -o input.c -v])
-## --------------------- ##
-## Solved SR Conflicts. ##
-## --------------------- ##
+# Check the contents of the report.
+AT_CHECK([cat input.output], [],
+[[Grammar
-AT_SETUP([Solved SR Conflicts])
+ 0 $axiom: expr $
-AT_DATA([input.y],
-[[%token NUM OP
-%right OP
-%%
-exp: exp OP exp | NUM;
-]])
+ 1 @1: /* empty */
-AT_CHECK([bison input.y -o input.c -v], 0, [], [])
+ 2 expr: 'a' @1 'b'
-# Check the contents of the report.
-AT_CHECK([cat input.output], [],
-[[Conflict in state 4 between rule 1 and token OP resolved as shift.
+ 3 @2: /* empty */
-Grammar
+ 4 expr: @2 'c'
- Number, Line, Rule
- 1 4 exp -> exp OP exp
- 2 4 exp -> NUM
Terminals, with rules where they appear
-$ (-1)
+$ (0) 0
+'a' (97) 2
+'b' (98) 2
+'c' (99) 4
error (256)
-NUM (257) 2
-OP (258) 1
+
Nonterminals, with rules where they appear
-exp (5)
- on left: 1 2, on right: 1
+$axiom (6)
+ on left: 0
+expr (7)
+ on left: 2 4, on right: 0
+@1 (8)
+ on left: 1, on right: 2
+@2 (9)
+ on left: 3, on right: 4
state 0
- NUM shift, and go to state 1
+ $axiom -> . expr $ (rule 0)
- exp go to state 2
+ 'a' shift, and go to state 1
+
+ $default reduce using rule 3 (@2)
+
+ expr go to state 2
+ @2 go to state 3
state 1
- exp -> NUM . (rule 2)
+ expr -> 'a' . @1 'b' (rule 2)
+
+ $default reduce using rule 1 (@1)
- $default reduce using rule 2 (exp)
+ @1 go to state 4
state 2
- exp -> exp . OP exp (rule 1)
+ $axiom -> expr . $ (rule 0)
- $ go to state 5
- OP shift, and go to state 3
+ $ shift, and go to state 5
state 3
- exp -> exp OP . exp (rule 1)
+ expr -> @2 . 'c' (rule 4)
- NUM shift, and go to state 1
-
- exp go to state 4
+ 'c' shift, and go to state 6
state 4
- exp -> exp . OP exp (rule 1)
- exp -> exp OP exp . (rule 1)
-
- OP shift, and go to state 3
+ expr -> 'a' @1 . 'b' (rule 2)
- $default reduce using rule 1 (exp)
+ 'b' shift, and go to state 7
state 5
- $ go to state 6
+ $axiom -> expr $ . (rule 0)
+ $default accept
state 6
- $default accept
-]])
-
-AT_CLEANUP
-
+ expr -> @2 'c' . (rule 4)
+ $default reduce using rule 4 (expr)
-## -------------------- ##
-## %expect not enough. ##
-## -------------------- ##
-AT_SETUP([%expect not enough])
-AT_DATA([input.y],
-[[%token NUM OP
-%expect 0
-%%
-exp: exp OP exp | NUM;
-]])
+state 7
-AT_CHECK([bison input.y -o input.c], 1, [],
-[input.y contains 1 shift/reduce conflict.
-expected 0 shift/reduce conflicts
-])
-AT_CLEANUP
+ expr -> 'a' @1 'b' . (rule 2)
+ $default reduce using rule 2 (expr)
-## --------------- ##
-## %expect right. ##
-## --------------- ##
-AT_SETUP([%expect right])
-AT_DATA([input.y],
-[[%token NUM OP
-%expect 1
-%%
-exp: exp OP exp | NUM;
]])
-AT_CHECK([bison input.y -o input.c], 0, [],
-[input.y contains 1 shift/reduce conflict.
-])
AT_CLEANUP
-## ------------------ ##
-## %expect too much. ##
-## ------------------ ##
-
-AT_SETUP([%expect too much])
-
-AT_DATA([input.y],
-[[%token NUM OP
-%expect 2
-%%
-exp: exp OP exp | NUM;
-]])
-
-AT_CHECK([bison input.y -o input.c], 1, [],
-[input.y contains 1 shift/reduce conflict.
-expected 2 shift/reduce conflicts
-])
-AT_CLEANUP
-
## ---------------------- ##
## Mixing %token styles. ##
%%
]])
-AT_CHECK([bison -v input.y -o input.c], 0, ignore, ignore)
+AT_CHECK([bison -v input.y -o input.c])
AT_CLEANUP
-## ---------------------- ##
-## %union and --defines. ##
-## ---------------------- ##
+## ---------------- ##
+## Invalid inputs. ##
+## ---------------- ##
-AT_SETUP([%union and --defines])
+AT_SETUP([Invalid inputs])
-AT_DATA([union.y],
-[%union
-{
- int integer;
- char *string ;
-}
-%%
-exp: {};
-])
+AT_DATA([input.y],
+[[%%
+?
+default: 'a' }
+%&
+%a
+%-
+%{
+]])
-AT_CHECK([bison --defines union.y])
+AT_CHECK([bison input.y], [1], [],
+[[input.y:2.1: invalid character: `?'
+input.y:3.14: invalid character: `}'
+input.y:4.1: invalid character: `%'
+input.y:4.2: invalid character: `&'
+input.y:5.1: invalid character: `%'
+input.y:6.1: invalid character: `%'
+input.y:6.2: invalid character: `-'
+input.y:7.1-8.0: unexpected end of file in a prologue
+input.y:7.1-8.0: parse error, unexpected PROLOGUE, expecting ";" or "|"
+input.y:5.2: symbol a is used, but is not defined as a token and has no rules
+]])
AT_CLEANUP
-## --------------------------------------- ##
-## Duplicate '/' in C comments in %union ##
-## --------------------------------------- ##
+## ------------------- ##
+## Token definitions. ##
+## ------------------- ##
-AT_SETUP([%union and C comments])
-AT_DATA([union-comment.y],
-[%union
-{
- /* The int. */ int integer;
- /* The string. */ char *string ;
-}
-%%
-exp: {};
-])
+AT_SETUP([Token definitions])
-AT_CHECK([bison union-comment.y])
-AT_CHECK([fgrep '//*' union-comment.tab.c], [1], [])
+# Bison managed, when fed with `%token 'f' "f"' to #define 'f'!
+AT_DATA([input.y],
+[%{
+void yyerror (const char *s);
+int yylex (void);
+%}
+[%token YYEOF 0 "end of file"
+%token 'a' "a"
+%token b "b"
+%token c 'c'
+%token 'd' d
+%%
+exp: "a";
+]])
+AT_CHECK([bison input.y -o input.c])
+AT_CHECK([$CC $CFLAGS $CPPFLAGS input.c -c])
AT_CLEANUP
-## ----------------- ##
-## Invalid input 1. ##
-## ----------------- ##
+## -------------- ##
+## Web2c Report. ##
+## -------------- ##
-AT_SETUP([Invalid input: 1])
+# The generation of the reduction was once wrong in Bison, and made it
+# miss some reductions. In the following test case, the reduction on
+# `undef_id_tok' in state 1 was missing. This is stripped down from
+# the actual web2c.y.
-AT_DATA([input.y],
-[[%%
-?
-]])
-
-AT_CHECK([bison input.y], [1], [],
-[input.y:2: invalid input: `?'
-input.y:3: fatal error: no rules in the input grammar
-])
+AT_SETUP([Web2c Report])
-AT_CLEANUP
+AT_KEYWORDS([report])
+AT_DATA([input.y],
+[[%token undef_id_tok const_id_tok
-## ----------------- ##
-## Invalid input 2. ##
-## ----------------- ##
+%start CONST_DEC_PART
+\f
+%%
+CONST_DEC_PART:
+ CONST_DEC_LIST
+ ;
+
+CONST_DEC_LIST:
+ CONST_DEC
+ | CONST_DEC_LIST CONST_DEC
+ ;
+
+CONST_DEC:
+ { } undef_id_tok '=' const_id_tok ';'
+ ;
+%%
+]])
-AT_SETUP([Invalid input: 2])
+AT_CHECK([bison -v input.y])
-AT_DATA([input.y],
-[[%%
-default: 'a' }
+AT_CHECK([sed -n 's/ *$//;/^$/!p' input.output], 0,
+[[Grammar
+ 0 $axiom: CONST_DEC_PART $
+ 1 CONST_DEC_PART: CONST_DEC_LIST
+ 2 CONST_DEC_LIST: CONST_DEC
+ 3 | CONST_DEC_LIST CONST_DEC
+ 4 @1: /* empty */
+ 5 CONST_DEC: @1 undef_id_tok '=' const_id_tok ';'
+Terminals, with rules where they appear
+$ (0) 0
+';' (59) 5
+'=' (61) 5
+error (256)
+undef_id_tok (258) 5
+const_id_tok (259) 5
+Nonterminals, with rules where they appear
+$axiom (7)
+ on left: 0
+CONST_DEC_PART (8)
+ on left: 1, on right: 0
+CONST_DEC_LIST (9)
+ on left: 2 3, on right: 1 3
+CONST_DEC (10)
+ on left: 5, on right: 2 3
+@1 (11)
+ on left: 4, on right: 5
+state 0
+ $axiom -> . CONST_DEC_PART $ (rule 0)
+ $default reduce using rule 4 (@1)
+ CONST_DEC_PART go to state 1
+ CONST_DEC_LIST go to state 2
+ CONST_DEC go to state 3
+ @1 go to state 4
+state 1
+ $axiom -> CONST_DEC_PART . $ (rule 0)
+ $ shift, and go to state 5
+state 2
+ CONST_DEC_PART -> CONST_DEC_LIST . (rule 1)
+ CONST_DEC_LIST -> CONST_DEC_LIST . CONST_DEC (rule 3)
+ undef_id_tok reduce using rule 4 (@1)
+ $default reduce using rule 1 (CONST_DEC_PART)
+ CONST_DEC go to state 6
+ @1 go to state 4
+state 3
+ CONST_DEC_LIST -> CONST_DEC . (rule 2)
+ $default reduce using rule 2 (CONST_DEC_LIST)
+state 4
+ CONST_DEC -> @1 . undef_id_tok '=' const_id_tok ';' (rule 5)
+ undef_id_tok shift, and go to state 7
+state 5
+ $axiom -> CONST_DEC_PART $ . (rule 0)
+ $default accept
+state 6
+ CONST_DEC_LIST -> CONST_DEC_LIST CONST_DEC . (rule 3)
+ $default reduce using rule 3 (CONST_DEC_LIST)
+state 7
+ CONST_DEC -> @1 undef_id_tok . '=' const_id_tok ';' (rule 5)
+ '=' shift, and go to state 8
+state 8
+ CONST_DEC -> @1 undef_id_tok '=' . const_id_tok ';' (rule 5)
+ const_id_tok shift, and go to state 9
+state 9
+ CONST_DEC -> @1 undef_id_tok '=' const_id_tok . ';' (rule 5)
+ ';' shift, and go to state 10
+state 10
+ CONST_DEC -> @1 undef_id_tok '=' const_id_tok ';' . (rule 5)
+ $default reduce using rule 5 (CONST_DEC)
]])
-AT_CHECK([bison input.y], [1], [],
-[input.y:2: invalid input: `}'
-])
-
AT_CLEANUP
+## --------------- ##
+## Web2c Actions. ##
+## --------------- ##
-## --------------------- ##
-## Invalid CPP headers. ##
-## --------------------- ##
+# The generation of the mapping `state -> action' was once wrong in
+# extremely specific situations. web2c.y exhibits this situation.
+# Below is a stripped version of the grammar. It looks like one can
+# simplify it further, but just don't: it is tuned to exhibit a bug,
+# which disapears when applying sane grammar transformations.
+#
+# It used to be wrong on yydefact only:
+#
+# static const short yydefact[] =
+# {
+# - 2, 0, 1, 0, 0, 2, 3, 2, 5, 4,
+# + 2, 0, 1, 0, 0, 0, 3, 2, 5, 4,
+# 0, 0
+# };
+#
+# but let's check all the tables.
-# AT_TEST_CPP_GUARD_H([INPUT-FILE-BASE)
-# -------------------------------------
-m4_define([AT_TEST_CPP_GUARD_H],
-[AT_SETUP([Invalid CPP guards: $1])
-# Possibly create inner directories.
-dirname=`AS_DIRNAME([$1])`
-AS_MKDIR_P([$dirname])
+AT_SETUP([Web2c Actions])
-AT_DATA([$1.y],
-[%%
-dummy:
-])
+AT_KEYWORDS([report])
-AT_CHECK([bison --defines=$1.h $1.y])
+AT_DATA([input.y],
+[[%%
+statement: struct_stat;
+struct_stat: /* empty. */ | if else;
+if: "if" "const" "then" statement;
+else: "else" statement;
+%%
+]])
-# CPP should be happy with it.
-AT_CHECK([$CC -E $1.h], 0, [ignore])
+AT_CHECK([bison -v input.y -o input.c])
-AT_CLEANUP
-])
+# Check only the tables. We don't use --no-parser, because it is
+# still to be implemented in the experimental branch of Bison.
+AT_CHECK([[sed -n 's/ *$//;/^static const.*\[\] =/,/^}/p' input.c]], 0,
+[[static const unsigned char yytranslate[] =
+{
+ 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
+ 5, 6
+};
+static const unsigned char yyprhs[] =
+{
+ 0, 0, 3, 5, 6, 9, 14
+};
+static const signed char yyrhs[] =
+{
+ 8, 0, -1, 9, -1, -1, 10, 11, -1, 3,
+ 4, 5, 8, -1, 6, 8, -1
+};
+static const unsigned char yyrline[] =
+{
+ 0, 2, 2, 3, 3, 4, 5
+};
+static const char *const yytname[] =
+{
+ "$", "error", "$undefined.", "\"if\"", "\"const\"", "\"then\"",
+ "\"else\"", "$axiom", "statement", "struct_stat", "if", "else", 0
+};
+static const short yytoknum[] =
+{
+ 0, 256, 257, 258, 259, 260, 261, -1
+};
+static const unsigned char yyr1[] =
+{
+ 0, 7, 8, 9, 9, 10, 11
+};
+static const unsigned char yyr2[] =
+{
+ 0, 2, 1, 0, 2, 4, 2
+};
+static const short yydefact[] =
+{
+ 3, 0, 0, 2, 0, 0, 0, 3, 4, 3,
+ 6, 5
+};
+static const short yydefgoto[] =
+{
+ -1, 2, 3, 4, 8
+};
+static const short yypact[] =
+{
+ -2, -1, 4,-32768, 0, 2,-32768, -2,-32768, -2,
+ -32768,-32768
+};
+static const short yypgoto[] =
+{
+ -32768, -7,-32768,-32768,-32768
+};
+static const short yytable[] =
+{
+ 10, 1, 11, 5, 6, 0, 7, 9
+};
+static const short yycheck[] =
+{
+ 7, 3, 9, 4, 0, -1, 6, 5
+};
+static const unsigned char yystos[] =
+{
+ 0, 3, 8, 9, 10, 4, 0, 6, 11, 5,
+ 8, 8
+};
+]])
-AT_TEST_CPP_GUARD_H([input/input])
-AT_TEST_CPP_GUARD_H([9foo])
+AT_CLEANUP
projects / bison.git / blobdiff