+** Java skeleton improvements:
+
+ The constants for token names were moved to the Lexer interface.
+ Also, it is possible to add code to the parser's constructors using
+ "%code init" and "%define init_throws".
+
+* Changes in version 2.5 (????-??-??):
+
+** IELR(1) and Canonical LR(1) Support
+
+ IELR(1) is a minimal LR(1) parser table generation algorithm. That
+ is, given any context-free grammar, IELR(1) generates parser tables
+ with the full language recognition power of canonical LR(1) but with
+ nearly the same number of parser states as LALR(1). This reduction in
+ parser states is often an order of magnitude. More importantly,
+ because canonical LR(1)'s extra parser states may contain duplicate
+ conflicts in the case of non-LR(1) grammars, the number of conflicts
+ for IELR(1) is often an order of magnitude less as well. This can
+ significantly reduce the complexity of developing of a grammar.
+
+ Bison can now generate IELR(1) and canonical LR(1) parser tables in
+ place of its traditional LALR(1) parser tables, which remain the
+ default. You can specify the type of parser tables in the grammar
+ file with these directives:
+
+ %define lr.type "LALR"
+ %define lr.type "IELR"
+ %define lr.type "canonical LR"
+
+ The default rules optimization in the parser tables can also be
+ adjusted using `%define lr.default_rules'. See the documentation for
+ `%define lr.type' and `%define lr.default_rules' in the section `Bison
+ Declaration Summary' in the Bison manual for the details.
+
+ These features are experimental. More user feedback will help to
+ stabilize them.
+
+** %define can now be invoked via the command line.
+
+ Each of these bison command-line options
+
+ -D NAME=VALUE
+ --define=NAME=VALUE
+
+ is equivalent to this grammar file declaration
+
+ %define NAME "VALUE"
+
+ for any NAME and VALUE. Omitting `=VALUE' on the command line is
+ equivalent to omitting `"VALUE"' in the declaration.
+
+** Temporary hack for adding a semicolon to the user action.
+
+ Previously, Bison appended a semicolon to every user action for
+ reductions when the output language defaulted to C (specifically, when
+ neither %yacc, %language, %skeleton, or equivalent command-line
+ options were specified). This allowed actions such as
+
+ exp: exp "+" exp { $$ = $1 + $3 };
+
+ instead of
+
+ exp: exp "+" exp { $$ = $1 + $3; };
+
+ As a first step in removing this misfeature, Bison now issues a
+ warning when it appends a semicolon. Moreover, in cases where Bison
+ cannot easily determine whether a semicolon is needed (for example, an
+ action ending with a cpp directive or a braced compound initializer),
+ it no longer appends one. Thus, the C compiler might now complain
+ about a missing semicolon where it did not before. Future releases of
+ Bison will cease to append semicolons entirely.
+
+* Changes in version 2.4.2 (????-??-??):
+
+* Changes in version 2.4.1 (2008-12-11):
+
+** In the GLR defines file, unexpanded M4 macros in the yylval and yylloc
+ declarations have been fixed.
+
+** Temporary hack for adding a semicolon to the user action.
+
+ Bison used to prepend a trailing semicolon at the end of the user
+ action for reductions. This allowed actions such as
+
+ exp: exp "+" exp { $$ = $1 + $3 };
+
+ instead of
+
+ exp: exp "+" exp { $$ = $1 + $3; };
+
+ Some grammars still depend on this `feature'. Bison 2.4.1 restores
+ the previous behavior in the case of C output (specifically, when
+ neither %language or %skeleton or equivalent command-line options
+ are used) to leave more time for grammars depending on the old
+ behavior to be adjusted. Future releases of Bison will disable this
+ feature.
+
+** A few minor improvements to the Bison manual.
+
+* Changes in version 2.4 (2008-11-02):
+
+** %language is an experimental feature.
+
+ We first introduced this feature in test release 2.3b as a cleaner
+ alternative to %skeleton. Since then, we have discussed the possibility of
+ modifying its effect on Bison's output file names. Thus, in this release,
+ we consider %language to be an experimental feature that will likely evolve
+ in future releases.
+
+** Forward compatibility with GNU M4 has been improved.
+
+** Several bugs in the C++ skeleton and the experimental Java skeleton have been
+ fixed.
+
+* Changes in version 2.3b (2008-05-27):
+
+** The quotes around NAME that used to be required in the following directive
+ are now deprecated:
+
+ %define NAME "VALUE"
+
+** The directive `%pure-parser' is now deprecated in favor of:
+
+ %define api.pure
+
+ which has the same effect except that Bison is more careful to warn about
+ unreasonable usage in the latter case.
+
+** Push Parsing
+
+ Bison can now generate an LALR(1) parser in C with a push interface. That
+ is, instead of invoking `yyparse', which pulls tokens from `yylex', you can
+ push one token at a time to the parser using `yypush_parse', which will
+ return to the caller after processing each token. By default, the push
+ interface is disabled. Either of the following directives will enable it:
+
+ %define api.push_pull "push" // Just push; does not require yylex.
+ %define api.push_pull "both" // Push and pull; requires yylex.
+
+ See the new section `A Push Parser' in the Bison manual for details.
+
+ The current push parsing interface is experimental and may evolve. More user
+ feedback will help to stabilize it.
+
+** The -g and --graph options now output graphs in Graphviz DOT format,
+ not VCG format. Like --graph, -g now also takes an optional FILE argument
+ and thus cannot be bundled with other short options.
+
+** Java
+
+ Bison can now generate an LALR(1) parser in Java. The skeleton is
+ `data/lalr1.java'. Consider using the new %language directive instead of
+ %skeleton to select it.
+
+ See the new section `Java Parsers' in the Bison manual for details.
+
+ The current Java interface is experimental and may evolve. More user
+ feedback will help to stabilize it.
+
+** %language
+
+ This new directive specifies the programming language of the generated
+ parser, which can be C (the default), C++, or Java. Besides the skeleton
+ that Bison uses, the directive affects the names of the generated files if
+ the grammar file's name ends in ".y".
+
+** XML Automaton Report
+
+ Bison can now generate an XML report of the LALR(1) automaton using the new
+ `--xml' option. The current XML schema is experimental and may evolve. More
+ user feedback will help to stabilize it.
+
+** The grammar file may now specify the name of the parser header file using
+ %defines. For example:
+
+ %defines "parser.h"
+
+** When reporting useless rules, useless nonterminals, and unused terminals,
+ Bison now employs the terms "useless in grammar" instead of "useless",
+ "useless in parser" instead of "never reduced", and "unused in grammar"
+ instead of "unused".
+
+** Unreachable State Removal
+
+ Previously, Bison sometimes generated parser tables containing unreachable
+ states. A state can become unreachable during conflict resolution if Bison
+ disables a shift action leading to it from a predecessor state. Bison now:
+
+ 1. Removes unreachable states.
+
+ 2. Does not report any conflicts that appeared in unreachable states.
+ WARNING: As a result, you may need to update %expect and %expect-rr
+ directives in existing grammar files.
+
+ 3. For any rule used only in such states, Bison now reports the rule as
+ "useless in parser due to conflicts".
+
+ This feature can be disabled with the following directive:
+
+ %define lr.keep_unreachable_states
+
+ See the %define entry in the `Bison Declaration Summary' in the Bison manual
+ for further discussion.
+
+** Lookahead Set Correction in the `.output' Report
+
+ When instructed to generate a `.output' file including lookahead sets
+ (using `--report=lookahead', for example), Bison now prints each reduction's
+ lookahead set only next to the associated state's one item that (1) is
+ associated with the same rule as the reduction and (2) has its dot at the end
+ of its RHS. Previously, Bison also erroneously printed the lookahead set
+ next to all of the state's other items associated with the same rule. This
+ bug affected only the `.output' file and not the generated parser source
+ code.
+
+** --report-file=FILE is a new option to override the default `.output' file
+ name.
+
+** The `=' that used to be required in the following directives is now
+ deprecated:
+
+ %file-prefix "parser"
+ %name-prefix "c_"
+ %output "parser.c"
+
+** An Alternative to `%{...%}' -- `%code QUALIFIER {CODE}'
+
+ Bison 2.3a provided a new set of directives as a more flexible alternative to
+ the traditional Yacc prologue blocks. Those have now been consolidated into
+ a single %code directive with an optional qualifier field, which identifies
+ the purpose of the code and thus the location(s) where Bison should generate
+ it:
+
+ 1. `%code {CODE}' replaces `%after-header {CODE}'
+ 2. `%code requires {CODE}' replaces `%start-header {CODE}'
+ 3. `%code provides {CODE}' replaces `%end-header {CODE}'
+ 4. `%code top {CODE}' replaces `%before-header {CODE}'
+
+ See the %code entries in section `Bison Declaration Summary' in the Bison
+ manual for a summary of the new functionality. See the new section `Prologue
+ Alternatives' for a detailed discussion including the advantages of %code
+ over the traditional Yacc prologues.
+
+ The prologue alternatives are experimental. More user feedback will help to
+ determine whether they should become permanent features.
+
+** Revised warning: unset or unused mid-rule values
+
+ Since Bison 2.2, Bison has warned about mid-rule values that are set but not
+ used within any of the actions of the parent rule. For example, Bison warns
+ about unused $2 in:
+
+ exp: '1' { $$ = 1; } '+' exp { $$ = $1 + $4; };
+
+ Now, Bison also warns about mid-rule values that are used but not set. For
+ example, Bison warns about unset $$ in the mid-rule action in:
+
+ exp: '1' { $1 = 1; } '+' exp { $$ = $2 + $4; };
+
+ However, Bison now disables both of these warnings by default since they
+ sometimes prove to be false alarms in existing grammars employing the Yacc
+ constructs $0 or $-N (where N is some positive integer).
+
+ To enable these warnings, specify the option `--warnings=midrule-values' or
+ `-W', which is a synonym for `--warnings=all'.
+
+** Default %destructor or %printer with `<*>' or `<>'
+
+ Bison now recognizes two separate kinds of default %destructor's and
+ %printer's:
+
+ 1. Place `<*>' in a %destructor/%printer symbol list to define a default
+ %destructor/%printer for all grammar symbols for which you have formally
+ declared semantic type tags.
+
+ 2. Place `<>' in a %destructor/%printer symbol list to define a default
+ %destructor/%printer for all grammar symbols without declared semantic
+ type tags.
+
+ Bison no longer supports the `%symbol-default' notation from Bison 2.3a.
+ `<*>' and `<>' combined achieve the same effect with one exception: Bison no
+ longer applies any %destructor to a mid-rule value if that mid-rule value is
+ not actually ever referenced using either $$ or $n in a semantic action.
+
+ The default %destructor's and %printer's are experimental. More user
+ feedback will help to determine whether they should become permanent
+ features.
+
+ See the section `Freeing Discarded Symbols' in the Bison manual for further
+ details.
+
+** %left, %right, and %nonassoc can now declare token numbers. This is required
+ by POSIX. However, see the end of section `Operator Precedence' in the Bison
+ manual for a caveat concerning the treatment of literal strings.
+
+** The nonfunctional --no-parser, -n, and %no-parser options have been
+ completely removed from Bison.
+
+* Changes in version 2.3a, 2006-09-13:
+
+** Instead of %union, you can define and use your own union type
+ YYSTYPE if your grammar contains at least one <type> tag.
+ Your YYSTYPE need not be a macro; it can be a typedef.
+ This change is for compatibility with other Yacc implementations,
+ and is required by POSIX.
+
+** Locations columns and lines start at 1.
+ In accordance with the GNU Coding Standards and Emacs.
+
+** You may now declare per-type and default %destructor's and %printer's:
+
+ For example:
+
+ %union { char *string; }
+ %token <string> STRING1
+ %token <string> STRING2
+ %type <string> string1
+ %type <string> string2
+ %union { char character; }
+ %token <character> CHR
+ %type <character> chr
+ %destructor { free ($$); } %symbol-default
+ %destructor { free ($$); printf ("%d", @$.first_line); } STRING1 string1
+ %destructor { } <character>
+
+ guarantees that, when the parser discards any user-defined symbol that has a
+ semantic type tag other than `<character>', it passes its semantic value to
+ `free'. However, when the parser discards a `STRING1' or a `string1', it
+ also prints its line number to `stdout'. It performs only the second
+ `%destructor' in this case, so it invokes `free' only once.
+
+ [Although we failed to mention this here in the 2.3a release, the default
+ %destructor's and %printer's were experimental, and they were rewritten in
+ future versions.]
+
+** Except for LALR(1) parsers in C with POSIX Yacc emulation enabled (with `-y',
+ `--yacc', or `%yacc'), Bison no longer generates #define statements for
+ associating token numbers with token names. Removing the #define statements
+ helps to sanitize the global namespace during preprocessing, but POSIX Yacc
+ requires them. Bison still generates an enum for token names in all cases.
+
+** Handling of traditional Yacc prologue blocks is now more consistent but
+ potentially incompatible with previous releases of Bison.
+
+ As before, you declare prologue blocks in your grammar file with the
+ `%{ ... %}' syntax. To generate the pre-prologue, Bison concatenates all
+ prologue blocks that you've declared before the first %union. To generate
+ the post-prologue, Bison concatenates all prologue blocks that you've
+ declared after the first %union.
+
+ Previous releases of Bison inserted the pre-prologue into both the header
+ file and the code file in all cases except for LALR(1) parsers in C. In the
+ latter case, Bison inserted it only into the code file. For parsers in C++,
+ the point of insertion was before any token definitions (which associate
+ token numbers with names). For parsers in C, the point of insertion was
+ after the token definitions.
+
+ Now, Bison never inserts the pre-prologue into the header file. In the code
+ file, it always inserts it before the token definitions.
+
+** Bison now provides a more flexible alternative to the traditional Yacc
+ prologue blocks: %before-header, %start-header, %end-header, and
+ %after-header.
+
+ For example, the following declaration order in the grammar file reflects the
+ order in which Bison will output these code blocks. However, you are free to
+ declare these code blocks in your grammar file in whatever order is most
+ convenient for you:
+
+ %before-header {
+ /* Bison treats this block like a pre-prologue block: it inserts it into
+ * the code file before the contents of the header file. It does *not*
+ * insert it into the header file. This is a good place to put
+ * #include's that you want at the top of your code file. A common
+ * example is `#include "system.h"'. */
+ }
+ %start-header {
+ /* Bison inserts this block into both the header file and the code file.
+ * In both files, the point of insertion is before any Bison-generated
+ * token, semantic type, location type, and class definitions. This is a
+ * good place to define %union dependencies, for example. */
+ }
+ %union {
+ /* Unlike the traditional Yacc prologue blocks, the output order for the
+ * new %*-header blocks is not affected by their declaration position
+ * relative to any %union in the grammar file. */
+ }
+ %end-header {
+ /* Bison inserts this block into both the header file and the code file.
+ * In both files, the point of insertion is after the Bison-generated
+ * definitions. This is a good place to declare or define public
+ * functions or data structures that depend on the Bison-generated
+ * definitions. */
+ }
+ %after-header {
+ /* Bison treats this block like a post-prologue block: it inserts it into
+ * the code file after the contents of the header file. It does *not*
+ * insert it into the header file. This is a good place to declare or
+ * define internal functions or data structures that depend on the
+ * Bison-generated definitions. */
+ }
+
+ If you have multiple occurrences of any one of the above declarations, Bison
+ will concatenate the contents in declaration order.
+
+ [Although we failed to mention this here in the 2.3a release, the prologue
+ alternatives were experimental, and they were rewritten in future versions.]
+
+** The option `--report=look-ahead' has been changed to `--report=lookahead'.
+ The old spelling still works, but is not documented and may be removed
+ in a future release.
+
+* Changes in version 2.3, 2006-06-05:
+
+** GLR grammars should now use `YYRECOVERING ()' instead of `YYRECOVERING',
+ for compatibility with LALR(1) grammars.
+
+** It is now documented that any definition of YYSTYPE or YYLTYPE should
+ be to a type name that does not contain parentheses or brackets.
+
+* Changes in version 2.2, 2006-05-19:
+
+** The distribution terms for all Bison-generated parsers now permit
+ using the parsers in nonfree programs. Previously, this permission
+ was granted only for Bison-generated LALR(1) parsers in C.
+
+** %name-prefix changes the namespace name in C++ outputs.
+
+** The C++ parsers export their token_type.
+
+** Bison now allows multiple %union declarations, and concatenates
projects / bison.git / blobdiff