-*- outline -*- This file attempts to describe the rules to use when hacking Bison. Don't put this file into the distribution. Everything related to the development of Bison is on Savannah: http://savannah.gnu.org/projects/bison/ * Administrivia ** If you incorporate a change from somebody on the net: First, if it is a large change, you must make sure they have signed the appropriate paperwork. Second, be sure to add their name and email address to THANKS. ** If a change fixes a test, mention the test in the ChangeLog entry. ** Bug reports If somebody reports a new bug, mention his name in the ChangeLog entry and in the test case you write. Put him into THANKS. The correct response to most actual bugs is to write a new test case which demonstrates the bug. Then fix the bug, re-run the test suite, and check everything in. ** You may find it useful to install the git-merge-changelog merge driver: http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=lib/git-merge-changelog.c When following the generic installation instructions there, keep in mind that your clone of Bison's git repository already contains appropriate .gitattributes files, and running Bison's bootstrap script will make the necessary changes to .git/config. * Hacking ** Visible changes Which include serious bug fixes, must be mentioned in NEWS. ** Translations Only user visible strings are to be translated: error messages, bits of the .output file etc. This excludes impossible error messages (comparable to assert/abort), and all the --trace output which is meant for the maintainers only. * Working from the repository These notes intend to help people working on the checked-out sources. These requirements do not apply when building from a distribution tarball. ** Requirements We've opted to keep only the highest-level sources in the repository. This eases our maintenance burden, (fewer merges etc.), but imposes more requirements on anyone wishing to build from the just-checked-out sources. For example, you have to use the latest stable versions of the maintainer tools we depend upon, including: - Automake <http://www.gnu.org/software/automake/> - Autoconf <http://www.gnu.org/software/autoconf/> - Flex <http://www.gnu.org/software/flex/> - Gettext <http://www.gnu.org/software/gettext/> - Gzip <http://www.gnu.org/software/gzip/> - Perl <http://www.cpan.org/> - Rsync <http://samba.anu.edu.au/rsync/> - Tar <http://www.gnu.org/software/tar/> Valgrind <http://valgrind.org/> is also highly recommended, if Valgrind supports your architecture. Bison is written using Bison grammars, so there are bootstrapping issues. The bootstrap script attempts to discover when the C code generated from the grammars is out of date, and to bootstrap with an out-of-date version of the C code, but the process is not foolproof. Also, you may run into similar problems yourself if you modify Bison. Only building the initial full source tree will be a bit painful. Later, after synchronizing from the repository a plain `make' should be sufficient. ** First checkout Obviously, if you are reading these notes, you did manage to check out this package from the repository. For the record, you will find all the relevant information on: http://savannah.gnu.org/git/?group=bison Bison uses Git submodules: subscriptions to other Git repositories. In particular it uses gnulib, the GNU portability library. To ask Git to perform the first checkout of the submodules, run $ git submodule update --init Git submodule support is weak before versions 1.6 and later, you should probably upgrade Git if your version is older. The next step is to get other files needed to build, which are extracted from other source packages: $ ./bootstrap And there you are! Just $ ./configure $ make $ make check At this point, there should be no difference between your local copy, and the master copy: $ git diff should output no difference. Enjoy! ** Updating The use of submodules make things somewhat different because git does not support recursive operations: submodules must be taken care of explicitly by the user. *** Updating Bison If you pull a newer version of a branch, say via `git pull', you might import requests for updated submodules. A simple `git diff' will reveal if the current version of the submodule (i.e., the actual contents of the gnulib directory) and the current request from the subscriber (i.e., the reference of the version of gnulib that the Bison reporitory requests) differ. To upgrade the submodules (i.e., to check out the version that is actually requested by the subscriber, run `git submodule update'. $ git pull $ git submodule update *** Updating a submodule To update a submodule, say gnulib, do as follows: Get the most recent version of the master branch from git. $ cd gnulib $ git fetch $ git checkout -b master --track origin/master Make sure Bison can live with that version of gnulib. $ cd .. $ ./bootstrap $ make distcheck Register your changes. $ git checkin ... * Test suite ** make check Use liberally. ** Release checks Try to run the test suite with more severe conditions before a release: - Configure the package with --enable-gcc-warnings, so that one checks that 1. Bison compiles cleanly, 2. the parsers it produces compile cleanly too. - run `make maintainer-check' which: - runs `valgrind -q bison' to run Bison under Valgrind. - runs the parsers under Valgrind. - runs the test suite with G++ as C compiler... - run `make maintainer-push-check', which runs `make maintainer-check' while activating the push implementation and its pull interface wrappers in many test cases that were originally written to exercise only the pull implementation. This makes certain the push implementation can perform every task the pull implementation can. - run `make maintainer-xml-check', which runs `make maintainer-check' while checking Bison's XML automaton report for every working grammar passed to Bison in the test suite. The check just diffs the output of Bison's included XSLT style sheets with the output of --report=all and --graph. - Change tests/atlocal/CFLAGS to add your preferred options. For instance, `-traditional' to check that the parsers are K&R. Note that it does not make sense for glr.c, which should be ANSI, but currently is actually GNU C, nor for lalr1.cc. * Release Procedure ** Try to get the *.pot files to the Translation Project at least one week before a stable release, to give them time to translate them. ** Tests See above. ** Update the foreign files Running `./bootstrap' in the top level should update them all for you. This covers PO files too. Sometimes a PO file contains problems that causes it to be rejected by recent Gettext releases; please report these to the Translation Project. ** Update README Make sure the information in this file is current. Most notably, make sure it recommends a version of GNU M4 that is compatible with the latest Bison sources. ** Update NEWS The version number, *and* the date of the release (including for betas). ** Update ChangeLog Should have an entry similar to `Version 1.49b.'. ** Update configure.ac Be sure PACKAGE_COPYRIGHT_YEAR is up-to-date. ** Tag the release Before Bison will build with the right version number, you must tag the release in git. Do this after all other changes. The command is similar to: git tag -a v2.3b The log message can be simply: Bison 2.3b ** Push Once `make distcheck' passes, push your changes and the tag. `git push' without arguments will not push the tag. ** make alpha FIXME: `make alpha' is not maintained and is broken. These instructions need to be replaced or removed. Running `make alpha' is absolutely perfect for beta releases: it makes the tarballs, the xdeltas, and prepares (in /tmp/) a proto announcement. It is so neat, that that's what I use anyway for genuine releases, but adjusting things by hand (e.g., the urls in the announcement file, the ChangeLog which is not needed etc.). If it fails, you're on your own... It requires GNU Make. ** Upload The generic GNU upload procedure is at: http://www.gnu.org/prep/maintain/maintain.html#Automated-FTP-Uploads Follow the instructions there to register your information so you're permitted to upload. Make sure your public key has been uploaded at least to keys.gnupg.net. You can upload it with: gpg --keyserver keys.gnupg.net --send-keys F125BDF3 where F125BDF3 should be replaced with your key ID. Here's a brief reminder of how to roll the tarballs and upload them: *** make distcheck *** gpg -b bison-2.3b.tar.gz *** In a file named `bison-2.3b.tar.gz.directive', type: version: 1.1 directory: bison filename: bison-2.3b.tar.gz *** gpg --clearsign bison-2.3b.tar.gz.directive *** ftp ftp-upload.gnu.org # Log in as anonymous. *** cd /incoming/alpha # cd /incoming/ftp for full release. *** put bison-2.3b.tar.gz # This can take a while. *** put bison-2.3b.tar.gz.sig *** put bison-2.3b.tar.gz.directive.asc *** Repeat all these steps for bison-2.3b.tar.bz2. ** Update Bison manual on www.gnu.org. *** You need a non-anonymous checkout of the web pages directory. $ cvs -d YOUR_USERID@cvs.savannah.gnu.org:/web/bison checkout bison *** Get familiar with the instructions for web page maintainers. http://www.gnu.org/server/standards/readme_index.html http://www.gnu.org/server/standards/README.software.html especially the note about symlinks. *** Build the web pages. Assuming BISON_CHECKOUT refers to a checkout of the Bison dir, and BISON_WWW_CHECKOUT refers to the web directory created above, do: $ cd $BISON_CHECKOUT/doc $ make stamp-vti $ ../build-aux/gendocs.sh -o "$BISON_WWW_CHECKOUT/manual" \ bison "Bison - GNU parser generator" $ cd $BISON_WWW_CHECKOUT Verify that the result looks sane. *** Commit the modified and the new files. *** Remove old files. Find the files which have not been overwritten (because they belonged to sections that have been removed or renamed): $ cd manual/html_node $ ls -lt Remove these files and commit their removal to CVS. For each of these files, add a line to the file .symlinks. This will ensure that hyperlinks to the removed files will redirect to the entire manual; this is better than a 404 error. There is a problem with 'index.html' being written twice (once for POSIX function 'index', once for the table of contents); you can ignore this issue. ** Announce To generate a template announcement file: make RELEASE_TYPE=alpha gpg_key_ID=F125BDF3 announcement where alpha can be replaced by beta or major and F125BDF3 should be replaced with your key ID. For an example of how to fill out the template, search the mailing list archives for the most recent release announcement. Complete/fix the announcement file, and send it at least to info-gnu@gnu.org (if a real release, or a ``serious beta''), bug-bison@gnu.org, help-bison@gnu.org, bison-patches@gnu.org, and coordinator@translationproject.org. Send the same announcement on the comp.compilers newsgroup by sending email to compilers@iecc.com. Do not make any Cc as the moderator will throw away anything cross-posted or Cc'ed. It really needs to be a separate message. ** Bump the version number In configure.ac. Run `make'. So that developers don't accidentally add new items to the old NEWS entry, create a new empty NEWS entry something like: Changes in version ?.? (????-??-??): Push these changes. ----- Copyright (C) 2002, 2003, 2004, 2005, 2007, 2008, 2009 Free Software Foundation, Inc. This file is part of GNU Bison. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.