X-Git-Url: https://git.saurik.com/apt.git/blobdiff_plain/efc487fbd46905f5f3efc4f31d7df15625bcbecf..a874991b8549397fb26c47bbf229854556a3fb60:/doc/apt.conf.5.xml diff --git a/doc/apt.conf.5.xml b/doc/apt.conf.5.xml index fb2be9a28..67aa933cc 100644 --- a/doc/apt.conf.5.xml +++ b/doc/apt.conf.5.xml @@ -21,12 +21,13 @@ &apt-email; &apt-product; - 10 December 2008 + 18 September 2009 apt.conf 5 + APT @@ -71,7 +72,7 @@ APT { with newlines placed to make it more readable. Lists can be created by - opening a scope and including a single word enclosed in quotes followed by a + opening a scope and including a single string enclosed in quotes followed by a semicolon. Multiple entries can be included, each separated by a semicolon. @@ -88,7 +89,8 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; Two specials are allowed, #include and #clear #include will include the given file, unless the filename ends in a slash, then the whole directory is included. - #clear is used to erase a list of names. + #clear is used to erase a part of the configuration tree. The + specified element and all its descendants are erased. All of the APT tools take a -o option which allows an arbitrary configuration directive to be specified on the command line. The syntax is a full option @@ -174,7 +176,7 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; PDiffs - Try do download deltas called PDiffs for + Try to download deltas called PDiffs for Packages or Sources files instead of downloading whole ones. True by default. @@ -202,8 +204,9 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; standard form of http://[[user][:pass]@]host[:port]/. Per host proxies can also be specified by using the form http::Proxy::<host> with the special keyword DIRECT - meaning to use no proxies. The http_proxy environment variable - will override all settings. + meaning to use no proxies. If no one of the above settings is specified, + http_proxy environment variable + will be used. Three settings are provided for cache control with HTTP/1.1 compliant proxy caches. No-Cache tells the proxy to not use its cached @@ -251,9 +254,13 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; ftp - FTP URIs; ftp::Proxy is the default proxy server to use. It is in the - standard form of ftp://[[user][:pass]@]host[:port]/ and is - overridden by the ftp_proxy environment variable. To use a ftp + FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the + standard form of ftp://[[user][:pass]@]host[:port]/. Per + host proxies can also be specified by using the form + ftp::Proxy::<host> with the special keyword DIRECT + meaning to use no proxies. If no one of the above settings is specified, + ftp_proxy environment variable + will be used. To use a ftp proxy you will have to set the ftp::ProxyLogin script in the configuration file. This entry specifies the commands to send to tell the proxy server what to connect to. Please see @@ -302,6 +309,34 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; + CompressionTypes + List of compression types which are understood by the acquire methods. + Files like Packages can be available in various compression formats. + Per default the acquire methods can decompress bzip2, lzma + and gzip compressed files, with this setting more formats can be added + on the fly or the used method can be changed. The syntax for this is: + Acquire::CompressionTypes::FileExtension "Methodname"; + Also the Order subgroup can be used to define in which order + the acquire system will try to download the compressed files. The acquire system will try the first + and proceed with the next compression type in this list on error, so to prefer one over the other type + simple add the preferred type at first - not already added default types will be added at run time + to the end of the list, so e.g. Acquire::CompressionTypes::Order:: "gz"; can + be used to prefer gzip compressed files over bzip2 and lzma. + If lzma should be preferred over gzip and bzip2 the + configure setting should look like this Acquire::CompressionTypes::Order { "lzma"; "gz"; }; + It is not needed to add bz2 explicit to the list as it will be added automatic. + Note that at run time the Dir::Bin::Methodname will + be checked: If this setting exists the method will only be used if this file exists, e.g. for + the bzip2 method (the inbuilt) setting is Dir::Bin::bzip2 "/bin/bzip2"; + Note also that list entries specified on the commandline will be added at the end of the list + specified in the configuration files, but before the default entries. To prefer a type in this case + over the ones specified in in the configuration files you can set the option direct - not in list style. + This will not override the defined list, it will only prefix the list with this type. + While it is possible to add an empty compression type to the order list, but APT in its current + version doesn't understand it correctly and will display many warnings about not downloaded files - + these warnings are most of the time false negatives. Future versions will maybe include a way to + really prefer uncompressed files to support the usage of local mirrors. + @@ -336,6 +371,7 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; Binary programs are pointed to by Dir::Bin. Dir::Bin::Methods specifies the location of the method handlers and gzip, + bzip2, lzma, dpkg, apt-get dpkg-source dpkg-buildpackage and apt-cache specify the location of the respective programs. @@ -428,6 +464,87 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; the default is to disable signing and produce all binaries. + + dpkg trigger usage (and related options) + APT can call dpkg in a way so it can make aggressive use of triggers over + multiply calls of dpkg. Without further options dpkg will use triggers only in between his + own run. Activating these options can therefore decrease the time needed to perform the + install / upgrade. Note that it is intended to activate these options per default in the + future, but as it changes the way APT calling dpkg drastical it needs a lot more testing. + These options are therefore currently experimental and should not be used in + productive environments. Also it breaks the progress reporting so all frontends will + currently stay around half (or more) of the time in the 100% state while it actually configures + all packages. + Note that it is not garanteed that APT will support these options or that these options will + not cause (big) trouble in the future. If you have understand the current risks and problems with + these options, but are brave enough to help testing them create a new configuration file and test a + combination of options. Please report any bugs, problems and improvements you encounter and make sure + to note which options you have used in your reports. Asking dpkg for help could also be useful for + debugging proposes, see e.g. dpkg --audit. A defensive option combination would be +DPkg::NoTriggers "true"; +PackageManager::Configure "smart"; +DPkg::ConfigurePending "true"; +DPkg::TriggersPending "true"; + + + DPkg::NoTriggers + Add the no triggers flag to all dpkg calls (expect the ConfigurePending call). + See &dpkg; if you are interested in what this actually means. In short: dpkg will not run the + triggers then this flag is present unless it is explicit called to do so in an extra call. + Note that this option exists (undocumented) also in older apt versions with a slightly different + meaning: Previously these option only append --no-triggers to the configure calls to dpkg - + now apt will add these flag also to the unpack and remove calls. + + PackageManager::Configure + Valid values are "all", "smart" and "no". + "all" is the default value and causes APT to configure all packages explicit. + The "smart" way is it to configure only packages which need to be configured before + another package can be unpacked (Pre-Depends) and let the rest configure by dpkg with a call generated + by the next option. "no" on the other hand will not configure anything and totally + relay on dpkg for configuration (which will at the moment fail if a Pre-Depends is encountered). + Setting this option to another than the all value will implicit activate also the next option per + default as otherwise the system could end in an unconfigured status which could be unbootable! + + + DPkg::ConfigurePending + If this option is set apt will call dpkg --configure --pending + to let dpkg handle all required configurations and triggers. This option is activated automatic + per default if the previous option is not set to all, but deactivating could be useful + if you want to run APT multiple times in a row - e.g. in an installer. In this sceneries you could + deactivate this option in all but the last run. + + DPkg::TriggersPending + Useful for smart configuration as a package which has pending + triggers is not considered as installed and dpkg treats them as unpacked + currently which is a dealbreaker for Pre-Dependencies (see debbugs #526774). Note that this will + process all triggers, not only the triggers needed to configure this package. + + PackageManager::UnpackAll + As the configuration can be deferred to be done at the end by dpkg it can be + tried to order the unpack series only by critical needs, e.g. by Pre-Depends. Default is true + and therefore the "old" method of ordering in verious steps by everything. While both method + were present in earlier APT versions the OrderCritical method was unused, so + this method is very experimental and needs further improvements before becoming really useful. + + + OrderList::Score::Immediate + Essential packages (and there dependencies) should be configured immediately + after unpacking. It will be a good idea to do this quite early in the upgrade process as these + these configure calls require currently also DPkg::TriggersPending which + will run quite a few triggers (which maybe not needed). Essentials get per default a high score + but the immediate flag is relativly low (a package which has a Pre-Depends is higher rated). + These option and the others in the same group can be used to change the scoring. The following + example shows the settings with there default values. + OrderList::Score { + Delete 500; + Essential 200; + Immediate 10; + PreDepends 50; +}; + + + + @@ -679,12 +796,33 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; + + Debug::pkgDepCache::Marker + + + Generate debug messages describing which package is marked + as keep/install/remove while the ProblemResolver does his work. + Each addition or deletion may trigger additional actions; + they are shown indented two additional space under the original entry. + The format for each line is MarkKeep, + MarkDelete or MarkInstall followed by + package-name <a.b.c -> d.e.f | x.y.z> (section) + where a.b.c is the current version of the package, + d.e.f is the version considered for installation and + x.y.z is a newer version, but not considered for installation + (because of a low pin score). The later two can be omitted if there is none or if + it is the same version as the installed. + section is the name of the section the package appears in. + + + + Debug::pkgInitConfig - Dump the default configuration to standard output on + Dump the default configuration to standard error on startup. @@ -756,6 +894,17 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; + + Debug::pkgProblemResolver::ShowScores + + + Display a list of all installed packages with their calculated score + used by the pkgProblemResolver. The description of the package + is the same as described in Debug::pkgDepCache::Marker + + + + Debug::sourceList @@ -767,6 +916,8 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; + @@ -786,7 +938,9 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";}; Files - /etc/apt/apt.conf + + &file-aptconf; + See Also