X-Git-Url: https://git.saurik.com/apt.git/blobdiff_plain/e77aedb863e2a9eebb5aa9628121d350c029527d..9f3713fc037ca363b514c8d8f7cbb65fdab2e8b1:/test/integration/framework

diff --git a/test/integration/framework b/test/integration/framework
index da85d2332..7dd7c20a7 100644
--- a/test/integration/framework
+++ b/test/integration/framework
@@ -1,5 +1,7 @@
 #!/bin/sh -- # no runable script, just for vi
 
+EXIT_CODE=0
+
 # we all like colorful messages
 if expr match "$(readlink -f /proc/$$/fd/1)" '/dev/pts/[0-9]\+' > /dev/null && \
    expr match "$(readlink -f /proc/$$/fd/2)" '/dev/pts/[0-9]\+' > /dev/null; then
@@ -36,7 +38,11 @@ msgtest() {
 }
 msgpass() { echo "${CPASS}PASS${CNORMAL}" >&2; }
 msgskip() { echo "${CWARNING}SKIP${CNORMAL}" >&2; }
-msgfail() { echo "${CFAIL}FAIL${CNORMAL}" >&2; }
+msgfail() {
+	if [ $# -gt 0 ]; then echo "${CFAIL}FAIL: $*${CNORMAL}" >&2;
+	else echo "${CFAIL}FAIL${CNORMAL}" >&2; fi
+	EXIT_CODE=$((EXIT_CODE+1));
+}
 
 # enable / disable Debugging
 MSGLEVEL=${MSGLEVEL:-3}
@@ -54,9 +60,9 @@ if [ $MSGLEVEL -le 2 ]; then
 	msgpass() { echo -n " ${CPASS}P${CNORMAL}" >&2; }
 	msgskip() { echo -n " ${CWARNING}S${CNORMAL}" >&2; }
 	if [ -n "$CFAIL" ]; then
-		msgfail() { echo -n " ${CFAIL}FAIL${CNORMAL}" >&2; }
+		msgfail() { echo -n " ${CFAIL}FAIL${CNORMAL}" >&2; EXIT_CODE=$((EXIT_CODE+1)); }
 	else
-		msgfail() { echo -n " ###FAILED###" >&2; }
+		msgfail() { echo -n " ###FAILED###" >&2; EXIT_CODE=$((EXIT_CODE+1)); }
 	fi
 fi
 if [ $MSGLEVEL -le 3 ]; then
@@ -91,6 +97,7 @@ runapt() {
 }
 aptconfig() { runapt apt-config $*; }
 aptcache() { runapt apt-cache $*; }
+aptcdrom() { runapt apt-cdrom $*; }
 aptget() { runapt apt-get $*; }
 aptftparchive() { runapt apt-ftparchive $*; }
 aptkey() { runapt apt-key $*; }
@@ -111,10 +118,26 @@ gdb() {
 	echo "gdb: run »$*«"
 	APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} $(which gdb) ${BUILDDIRECTORY}/$1
 }
+http() {
+	LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/methods/http
+}
+
+exitwithstatus() {
+        # error if we about to overflow, but ...
+        #   "255 failures ought to be enough for everybody"
+        if [ $EXIT_CODE -gt 255 ]; then
+            msgdie "Total failure count $EXIT_CODE too big"
+        fi
+        exit $((EXIT_CODE <= 255 ? EXIT_CODE : 255));
+}
 
 addtrap() {
-	CURRENTTRAP="$CURRENTTRAP $1"
-	trap "$CURRENTTRAP exit;" 0 HUP INT QUIT ILL ABRT FPE SEGV PIPE TERM
+	if [ "$1" = 'prefix' ]; then
+		CURRENTTRAP="$2 $CURRENTTRAP"
+	else
+		CURRENTTRAP="$CURRENTTRAP $1"
+	fi
+	trap "$CURRENTTRAP exitwithstatus;" 0 HUP INT QUIT ILL ABRT FPE SEGV PIPE TERM
 }
 
 setupenvironment() {
@@ -123,8 +146,7 @@ setupenvironment() {
 	msgninfo "Preparing environment for ${CCMD}$(basename $0)${CINFO} in ${TMPWORKINGDIRECTORY}… "
 	BUILDDIRECTORY="${TESTDIRECTORY}/../../build/bin"
 	test -x "${BUILDDIRECTORY}/apt-get" || msgdie "You need to build tree first"
-	local OLDWORKINGDIRECTORY=$(pwd)
-	addtrap "cd /; rm -rf $TMPWORKINGDIRECTORY; cd $OLDWORKINGDIRECTORY;"
+	addtrap "cd /; rm -rf $TMPWORKINGDIRECTORY;"
 	cd $TMPWORKINGDIRECTORY
 	mkdir rootdir aptarchive keys
 	cd rootdir
@@ -327,9 +349,15 @@ Package: $NAME" >> ${BUILDDIR}/debian/control
 	fi
 
 	echo '3.0 (native)' > ${BUILDDIR}/debian/source/format
-	local SRCS="$( (cd ${BUILDDIR}/..; dpkg-source -b ${NAME}-${VERSION} 2>&1) | grep '^dpkg-source: info: building' | grep -o '[a-z0-9._+~-]*$')"
-	for SRC in $SRCS; do
+	(cd ${BUILDDIR}/..; dpkg-source -b ${NAME}-${VERSION} 2>&1) | sed -n 's#^dpkg-source: info: building [^ ]\+ in ##p' \
+		| while read SRC; do
 		echo "pool/${SRC}" >> ${BUILDDIR}/../${RELEASE}.${DISTSECTION}.srclist
+#		if expr match "${SRC}" '.*\.dsc' >/dev/null 2>&1; then
+#			gpg --yes --no-default-keyring --secret-keyring ./keys/joesixpack.sec \
+#				--keyring ./keys/joesixpack.pub --default-key 'Joe Sixpack' \
+#				--clearsign -o "${BUILDDIR}/../${SRC}.sign" "${BUILDDIR}/../$SRC"
+#			mv "${BUILDDIR}/../${SRC}.sign" "${BUILDDIR}/../$SRC"
+#		fi
 	done
 
 	for arch in $(echo "$ARCH" | sed -e 's#,#\n#g' | sed -e "s#^native\$#$(getarchitecture 'native')#"); do
@@ -465,9 +493,10 @@ insertpackage() {
 	local VERSION="$4"
 	local DEPENDENCIES="$5"
 	local PRIORITY="${6:-optional}"
+	local DESCRIPTION="${7}"
 	local ARCHS=""
 	for arch in $(echo "$ARCH" | sed -e 's#,#\n#g' | sed -e "s#^native\$#$(getarchitecture 'native')#"); do
-		if [ "$arch" = "all" ]; then
+		if [ "$arch" = 'all' -o "$arch" = 'none' ]; then
 			ARCHS="$(getarchitectures)"
 		else
 			ARCHS="$arch"
@@ -481,16 +510,21 @@ insertpackage() {
 Priority: $PRIORITY
 Section: other
 Installed-Size: 42
-Maintainer: Joe Sixpack <joe@example.org>
-Architecture: $arch
-Version: $VERSION
+Maintainer: Joe Sixpack <joe@example.org>" >> $FILE
+			test "$arch" = 'none' || echo "Architecture: $arch" >> $FILE
+			echo "Version: $VERSION
 Filename: pool/main/${NAME}/${NAME}_${VERSION}_${arch}.deb" >> $FILE
 			test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> $FILE
-			echo "Description: an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
+			echo -n 'Description: ' >> $FILE
+			if [ -z "$DESCRIPTION" ]; then
+				echo "an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
  If you find such a package installed on your system,
  YOU did something horribly wrong! They are autogenerated
- und used only by testcases for APT and surf no other propose…
-" >> $FILE
+ und used only by testcases for APT and surf no other propose…" >> $FILE
+			else
+				echo "$DESCRIPTION" >> $FILE
+			fi
+			echo >> $FILE
 		done
 	done
 }
@@ -523,17 +557,18 @@ insertinstalledpackage() {
 	local VERSION="$3"
 	local DEPENDENCIES="$4"
 	local PRIORITY="${5:-optional}"
+	local STATUS="${6:-install ok installed}"
 	local FILE='rootdir/var/lib/dpkg/status'
 	local INFO='rootdir/var/lib/dpkg/info'
 	for arch in $(echo "$ARCH" | sed -e 's#,#\n#g' | sed -e "s#^native\$#$(getarchitecture 'native')#"); do
 		echo "Package: $NAME
-Status: install ok installed
+Status: $STATUS
 Priority: $PRIORITY
 Section: other
 Installed-Size: 42
 Maintainer: Joe Sixpack <joe@example.org>
-Architecture: $arch
 Version: $VERSION" >> $FILE
+		test "$arch" = 'none' || echo "Architecture: $arch" >> $FILE
 		test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> $FILE
 		echo "Description: an autogenerated dummy ${NAME}=${VERSION}/installed
  If you find such a package installed on your system,
@@ -570,9 +605,12 @@ buildaptarchivefromfiles() {
 		cat ${line} | bzip2 > ${line}.bz2
 		cat ${line} | xz --format=lzma > ${line}.lzma
 		cat ${line} | xz > ${line}.xz
+		if [ -n "$1" ]; then
+			touch -d "$1" ${line}.gz ${line}.bz2 ${line}.lzma ${line}.xz
+		fi
 		msgdone "info"
 	done
-	generatereleasefiles
+	generatereleasefiles "$@"
 }
 
 # can be overridden by testcases for their pleasure
@@ -664,9 +702,11 @@ setupaptarchive() {
 		setupflataptarchive
 	fi
 	signreleasefiles
-	msgninfo "\tSync APT's cache with the archive… "
-	aptget update -qq
-	msgdone "info"
+	if [ "$1" != '--no-update' ]; then
+		msgninfo "\tSync APT's cache with the archive… "
+		aptget update -qq
+		msgdone "info"
+	fi
 }
 
 signreleasefiles() {
@@ -682,18 +722,33 @@ signreleasefiles() {
 	done
 	for RELEASE in $(find aptarchive/ -name Release); do
 		gpg --yes --no-default-keyring $SECKEYS $PUBKEYS --default-key "$SIGNER" -abs -o ${RELEASE}.gpg ${RELEASE}
-		gpg --yes --no-default-keyring $SECKEYS $PUBKEYS --default-key "$SIGNER" --clearsign -o "$(echo "${RELEASE}" | sed 's#/Release$#/InRelease#')" $RELEASE
+		local INRELEASE="$(echo "${RELEASE}" | sed 's#/Release$#/InRelease#')"
+		gpg --yes --no-default-keyring $SECKEYS $PUBKEYS --default-key "$SIGNER" --clearsign -o $INRELEASE $RELEASE
+		# we might have set a specific date for the Release file, so copy it
+		touch -d "$(stat --format "%y" ${RELEASE})" ${RELEASE}.gpg ${INRELEASE}
 	done
 	msgdone "info"
 }
 
 changetowebserver() {
-	if which weborf > /dev/null; then
-		weborf -xb aptarchive/ 2>&1 > /dev/null &
+	local LOG='/dev/null'
+	if test -x ${BUILDDIRECTORY}/aptwebserver; then
+		cd aptarchive
+		LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/aptwebserver -o aptwebserver::fork=1 "$@" >$LOG 2>&1
+		local PID="$(cat aptwebserver.pid)"
+		if [ -z "$PID" ]; then
+			msgdie 'Could not fork aptwebserver successfully'
+		fi
+		addtrap "kill $PID;"
+		cd - > /dev/null
+	elif [ $# -gt 0 ]; then
+		msgdie 'Need the aptwebserver when passing arguments for the webserver'
+	elif which weborf > /dev/null; then
+		weborf -xb aptarchive/ >$LOG 2>&1 &
 		addtrap "kill $!;"
 	elif which gatling > /dev/null; then
 		cd aptarchive
-		gatling -p 8080 -F -S 2>&1 > /dev/null &
+		gatling -p 8080 -F -S >$LOG 2>&1 &
 		addtrap "kill $!;"
 		cd - > /dev/null
 	elif which lighttpd > /dev/null; then
@@ -701,11 +756,10 @@ changetowebserver() {
 server.port = 8080
 server.stat-cache-engine = \"disable\"" > lighttpd.conf
 		lighttpd -t -f lighttpd.conf >/dev/null || msgdie 'Can not change to webserver: our lighttpd config is invalid'
-		lighttpd -D -f lighttpd.conf 2>/dev/null >/dev/null &
+		lighttpd -D -f lighttpd.conf >$LOG 2>&1 &
 		addtrap "kill $!;"
 	else
-		msgdie 'You have to install weborf or lighttpd first'
-		return 1
+		msgdie 'You have to build aptwerbserver or install a webserver'
 	fi
 	local APTARCHIVE="file://$(readlink -f ./aptarchive)"
 	for LIST in $(find rootdir/etc/apt/sources.list.d/ -name 'apt-test-*.list'); do
@@ -714,6 +768,21 @@ server.stat-cache-engine = \"disable\"" > lighttpd.conf
 	return 0
 }
 
+changetocdrom() {
+	mkdir -p rootdir/media/cdrom/.disk
+	local CD="$(readlink -f rootdir/media/cdrom)"
+	echo "acquire::cdrom::mount \"${CD}\";" > rootdir/etc/apt/apt.conf.d/00cdrom
+	echo 'acquire::cdrom::autodetect 0;' >> rootdir/etc/apt/apt.conf.d/00cdrom
+	echo -n "$1" > ${CD}/.disk/info
+	if [ ! -d aptarchive/dists ]; then
+		msgdie 'Flat file archive cdroms can not be created currently'
+		return 1
+	fi
+	mv aptarchive/dists $CD
+	ln -s "$(readlink -f ./incoming)" $CD/pool
+	find rootdir/etc/apt/sources.list.d/ -name 'apt-test-*.list' -delete
+}
+
 checkdiff() {
 	local DIFFTEXT="$($(which diff) -u $* | sed -e '/^---/ d' -e '/^+++/ d' -e '/^@@/ d')"
 	if [ -n "$DIFFTEXT" ]; then
@@ -801,7 +870,7 @@ testnopackage() {
 
 testdpkginstalled() {
 	msgtest "Test for correctly installed package(s) with" "dpkg -l $*"
-	local PKGS="$(dpkg -l $* | grep '^i' | wc -l)"
+	local PKGS="$(dpkg -l $* 2>/dev/null | grep '^i' | wc -l)"
 	if [ "$PKGS" != $# ]; then
 		echo $PKGS
 		dpkg -l $* | grep '^[a-z]'