X-Git-Url: https://git.saurik.com/apt.git/blobdiff_plain/e74ff795d39894268c737c4b1864869dadb74ed1..1eba782fc3c55528a4da14d79e114874b9299453:/debian/rules

diff --git a/debian/rules b/debian/rules
index 83e23881c..7b7df7ad9 100755
--- a/debian/rules
+++ b/debian/rules
@@ -3,9 +3,13 @@
 # Sample debian/rules that uses debhelper. GNU copyright 1997 by Joey Hess.
 # Some lines taken from debmake, by Christoph Lameter.
 
+# build in verbose mode by default to make it easy to diangose issues
+export NOISY=1
+
 export DEB_HOST_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
 export DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
 export DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)
+export PARALLEL = $(or $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS))),1)
 
 # FOR AUTOCONF 2.52 AND NEWER ONLY
 ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
@@ -14,13 +18,19 @@ else
   confflags += --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE)
 endif
 
+# Set the number of procs to be run in parallel from the options.
+confflags += --with-procs=$(PARALLEL)
+
 # See below
 -include build/environment.mak
 
 ifneq (,$(shell which dpkg-buildflags))
-  export CXXFLAGS = $(shell dpkg-buildflags --get CXXFLAGS)
-  export LDFLAGS = $(shell dpkg-buildflags --get LDFLAGS)
-  export CPPFLAGS = $(shell dpkg-buildflags --get CPPFLAGS)
+  # make does not export to $(shell) so we need to workaround 
+  # (http://savannah.gnu.org/bugs/?10593)
+  dpkg_buildflags = DEB_BUILD_MAINT_OPTIONS=hardening=+all dpkg-buildflags
+  export CXXFLAGS = $(shell $(dpkg_buildflags) --get CXXFLAGS)
+  export LDFLAGS = $(shell $(dpkg_buildflags) --get LDFLAGS)
+  export CPPFLAGS = $(shell $(dpkg_buildflags) --get CPPFLAGS)
 else
   ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
     export CXXFLAGS = -O0 -g -Wall
@@ -50,6 +60,11 @@ ifeq ($(words $(BLD)),0)
 override BLD := ./build
 endif
 
+# When building without <nocheck>, the header is available and thus the test is
+# successful. When building with <nocheck>, the header is missing, but we still
+# pretend it to be available, because configure would fail otherwise.
+export ac_cv_header_gtest_gtest_h=yes
+
 # APT Programs in apt-utils
 APT_UTILS=ftparchive sortpkgs extracttemplates
 
@@ -66,8 +81,8 @@ LIBAPT_INST=libapt-inst$(LIBAPTINST_MAJOR)
 # do not fail as we are just experimenting with symbol files for now
 export DPKG_GENSYMBOLS_CHECK_LEVEL=0
 
-build: build/build-stamp
-build-debiandoc: build/build-debiandoc-stamp
+build-binary: build/build-binary-stamp
+build-docbook: build/build-docbook-stamp
 build-manpages: build/build-manpages-stamp
 
 # Note that this is unconditionally done first as part of loading environment.mak
@@ -76,15 +91,15 @@ build-manpages: build/build-manpages-stamp
 build/environment.mak: build/configure-stamp
 	@true
 
-configure: configure.in
-build/configure-stamp: configure
+configure: configure.ac
+build/configure-stamp: configure buildlib/config.sub buildlib/config.guess
 	dh_testdir
-	-mkdir build
+	mkdir -p build
 	cp COPYING debian/copyright
 	cd build && CXXFLAGS="$(CXXFLAGS)" LDFLAGS="$(LDFLAGS)" CPPFLAGS="$(CPPFLAGS)" ../configure $(confflags)
 	touch $@
 
-build/build-stamp: build/configure-stamp
+build/build-binary-stamp: build/configure-stamp
 	# Add here commands to compile the package.
 	$(MAKE) binary
 	# compat symlink for the locale split
@@ -98,9 +113,9 @@ else
 endif
 	touch $@
 
-build/build-debiandoc-stamp: build/configure-stamp
+build/build-docbook-stamp: build/configure-stamp
 	# Add here commands to compile the package.
-	$(MAKE) debiandoc
+	$(MAKE) docbook
 	touch $@
 
 build/build-manpages-stamp: build/configure-stamp
@@ -110,18 +125,20 @@ build/build-manpages-stamp: build/configure-stamp
 
 clean:
 	dh_testdir
+	dh_clean
 
 	[ ! -f Makefile ] || $(MAKE) clean distclean
 	rm -rf build
 	rm -f debian/$(LIBAPT_PKG).install debian/$(LIBAPT_INST).install \
-	      debian/libapt-pkg-dev.install
+	      debian/libapt-pkg-dev.install debian/apt.install
+	test ! -L buildlib/config.guess || rm -f buildlib/config.guess
+	test ! -L buildlib/config.sub || rm -f buildlib/config.sub
 
 debian/%.install: debian/%.install.in
 	sed 's/@DEB_HOST_MULTIARCH@/$(DEB_HOST_MULTIARCH)/g' $< > $@
 
-binary-indep: apt-doc libapt-pkg-doc
 # Build architecture-independent files here.
-libapt-pkg-doc: build-debiandoc
+libapt-pkg-doc: build-docbook
 	dh_testdir -p$@
 	dh_testroot -p$@
 	dh_prep -p$@
@@ -129,6 +146,7 @@ libapt-pkg-doc: build-debiandoc
 #
 # libapt-pkg-doc install
 #
+	rm -f $(BLD)/doc/doxygen/html/*.map $(BLD)/doc/doxygen/html/*.md5
 	dh_installdocs -p$@ $(BLD)/docs/design* \
 			    $(BLD)/docs/dpkg-tech* \
 			    $(BLD)/docs/files* \
@@ -140,14 +158,14 @@ libapt-pkg-doc: build-debiandoc
 
 	dh_installchangelogs -p$@
 	dh_strip -p$@
-	dh_compress -p$@
+	dh_compress -p$@ -X.xhtml
 	dh_fixperms -p$@
 	dh_installdeb -p$@
 	dh_gencontrol -p$@
 	dh_md5sums -p$@
 	dh_builddeb -p$@
 
-apt-doc: build-debiandoc
+apt-doc: build-docbook
 	dh_testdir -p$@
 	dh_testroot -p$@
 	dh_prep -p$@
@@ -171,9 +189,8 @@ apt-doc: build-debiandoc
 
 # Build architecture-dependent files here.
 
-binary-arch: $(LIBAPT_PKG) $(LIBAPT_INST) apt libapt-pkg-dev apt-utils apt-transport-https
-apt_MANPAGES = apt-cache apt-cdrom apt-config apt-get apt-key apt-mark apt-secure apt apt.conf apt_preferences sources.list
-apt: build build-manpages
+apt_MANPAGES = apt apt-cache apt-cdrom apt-config apt-get apt-key apt-mark apt-secure apt apt.conf apt_preferences sources.list
+apt: build-binary build-manpages debian/apt.install
 	dh_testdir -p$@
 	dh_testroot -p$@
 	dh_prep -p$@
@@ -182,6 +199,10 @@ apt: build build-manpages
 # apt install
 #
 	cp debian/apt.conf.autoremove debian/$@/etc/apt/apt.conf.d/01autoremove
+	cp debian/apt.auto-removal.sh debian/$@/etc/kernel/postinst.d/apt-auto-removal
+	chmod 755 debian/$@/etc/kernel/postinst.d/apt-auto-removal
+	# install vendor specific apt confs
+	find -L vendor/current -name 'apt.conf-*' | while read conf; do cp "$${conf}" "debian/$@/etc/apt/apt.conf.d/$${conf#*-}"; done
 
 	# make rosetta happy and remove pot files in po/ (but leave stuff
 	# in po/domains/* untouched) and cp *.po into each domain dir
@@ -200,24 +221,32 @@ apt: build build-manpages
 	#mv debian/$@/usr/bin/apt-report-mirror-failure \
 	#   debian/$@/usr/lib/apt/apt-report-mirror-failure \
 
+	# move the apt-helper in place
+	mv debian/$@/usr/bin/apt-helper debian/$@/usr/lib/apt/apt-helper
+	# install apt.systemd.daily helper in the right place
+	install -m755 debian/apt.systemd.daily debian/$@/usr/lib/apt/
+
 	dh_bugfiles -p$@
 	dh_lintian -p$@
 	dh_installexamples -p$@ $(BLD)/docs/examples/*
-	dh_installman -p$@ $(wildcard $(patsubst %,doc/%.[158],$(apt_MANPAGES)) $(patsubst %,doc/*/%.*.[158],$(apt_MANPAGES)))
-	dh_installcron -p$@
+	dh_installman -p$@ $(wildcard $(patsubst %,doc/en/%.[158],$(apt_MANPAGES)) $(patsubst %,doc/*/%.*.[158],$(apt_MANPAGES)))
+	dh_installcron -p$@ --name=apt-compat
+	dh_systemd_enable -p$@ apt-daily.timer
+	dh_systemd_start -p$@ apt-daily.timer
 	dh_installdocs -p$@
 	dh_installchangelogs -p$@
 	dh_installlogrotate -p$@
 	dh_strip -p$@
 	dh_compress -p$@
 	dh_fixperms -p$@
+	dh_makeshlibs -p$@
 	dh_installdeb -p$@
 	dh_shlibdeps -p$@
-	dh_gencontrol -p$@
+	dh_gencontrol -p$@ -- -Vapt:keyring="$(shell ./vendor/getinfo keyring-package)"
 	dh_md5sums -p$@
 	dh_builddeb -p$@
 
-libapt-pkg-dev: build debian/libapt-pkg-dev.install
+libapt-pkg-dev: build-binary debian/libapt-pkg-dev.install
 	dh_testdir -p$@
 	dh_testroot -p$@
 	dh_prep -p$@
@@ -237,7 +266,7 @@ libapt-pkg-dev: build debian/libapt-pkg-dev.install
 	dh_builddeb -p$@
 
 apt-utils_MANPAGES = apt-sortpkgs apt-ftparchive apt-extracttemplates
-apt-utils: build build-manpages
+apt-utils: build-binary build-manpages
 	dh_testdir -p$@
 	dh_testroot -p$@
 	dh_prep -p$@
@@ -253,7 +282,7 @@ apt-utils: build build-manpages
 	dh_installexamples -p$@
 
 	# Install the man pages..
-	dh_installman -p$@ $(wildcard $(patsubst %,doc/%.[158],$(apt-utils_MANPAGES)) $(patsubst %,doc/*/%.*.[158],$(apt-utils_MANPAGES)))
+	dh_installman -p$@ $(wildcard $(patsubst %,doc/en/%.[158],$(apt-utils_MANPAGES)) $(patsubst %,doc/*/%.*.[158],$(apt-utils_MANPAGES)))
 
 	dh_installchangelogs -p$@
 	dh_strip -p$@
@@ -266,7 +295,7 @@ apt-utils: build build-manpages
 	dh_md5sums -p$@
 	dh_builddeb -p$@
 
-$(LIBAPT_PKG): build debian/$(LIBAPT_PKG).install
+$(LIBAPT_PKG): build-binary debian/$(LIBAPT_PKG).install
 	dh_testdir -p$@
 	dh_testroot -p$@
 	dh_prep -p$@
@@ -285,7 +314,7 @@ $(LIBAPT_PKG): build debian/$(LIBAPT_PKG).install
 	dh_md5sums -p$@
 	dh_builddeb -p$@
 
-$(LIBAPT_INST): build debian/$(LIBAPT_INST).install
+$(LIBAPT_INST): build-binary debian/$(LIBAPT_INST).install
 	dh_testdir -p$@
 	dh_testroot -p$@
 	dh_prep -p$@
@@ -304,7 +333,7 @@ $(LIBAPT_INST): build debian/$(LIBAPT_INST).install
 	dh_md5sums -p$@
 	dh_builddeb -p$@
 
-apt-transport-https: build libapt-pkg-dev
+apt-transport-https: build-binary libapt-pkg-dev
 	dh_testdir -p$@
 	dh_testroot -p$@
 	dh_prep -p$@
@@ -327,13 +356,18 @@ apt-transport-https: build libapt-pkg-dev
 	dh_md5sums -p$@
 	dh_builddeb -p$@
 
+buildlib/config.guess buildlib/config.sub:
+	$(MAKE) "$@"
+
 configure:
 	$(MAKE) configure
 
-really-clean: clean
-	-find . -name Makefile.in -print0 | xargs --null --no-run-if-empty -- rm -f
-	find -name ChangeLog | xargs rm -f
-	rm -f l33ch-stamp
-
+# translate targets to targets required by debian-policy
+binary-arch: $(LIBAPT_PKG) $(LIBAPT_INST) apt libapt-pkg-dev apt-utils apt-transport-https
+binary-indep: apt-doc libapt-pkg-doc
 binary: binary-indep binary-arch
+build-arch: build-binary
+build-indep: build-manpages build-docbook
+build: build-indep build-arch
+
 .PHONY: build clean binary-indep binary-arch binary