X-Git-Url: https://git.saurik.com/apt.git/blobdiff_plain/68e07cd093da75f42a240343c6f707da185fb33b..f8b879c2c805e6d49d438cad877a1706e4ae56d2:/doc/po/de.po diff --git a/doc/po/de.po b/doc/po/de.po index bb370e716..f4cacb321 100644 --- a/doc/po/de.po +++ b/doc/po/de.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: apt-doc 1.0.8\n" "Report-Msgid-Bugs-To: APT Development Team \n" -"POT-Creation-Date: 2016-01-08 21:45+0100\n" +"POT-Creation-Date: 2016-08-11 14:09+0200\n" "PO-Revision-Date: 2014-09-14 14:46+0200\n" "Last-Translator: Chris Leick \n" "Language-Team: German \n" @@ -713,7 +713,7 @@ msgstr "" "Paketkonflikts nötig ist." #. type: Content of: -#: apt.8.xml +#: apt.8.xml apt-key.8.xml msgid "," msgstr "" @@ -740,10 +740,10 @@ msgid "" "A specific version of a package can be selected for installation by " "following the package name with an equals (=) and the version of the package " "to select. Alternatively the version from a specific release can be selected " -"by following the package name with a forward slash (/) and codename (&stable-" -"codename;, &testing-codename;, sid …) or suite name (stable, testing, " -"unstable). This will also select versions from this release for dependencies " -"of this package if needed to satisfy the request." +"by following the package name with a forward slash (/) and codename (&debian-" +"stable-codename;, &debian-testing-codename;, sid …) or suite name (stable, " +"testing, unstable). This will also select versions from this release for " +"dependencies of this package if needed to satisfy the request." msgstr "" "Eine bestimmte Version eines Paketes kann durch den Paketnamen gefolgt von " "einem Gleichheitszeichen und der Version des Paketes zur Installation " @@ -1389,8 +1389,8 @@ msgid "" "command is mainly used as an interface for external tools working with APT " "to get information as well as filenames for downloaded files so they can use " "them as well instead of downloading them again on their own. Detailed " -"documentation is omitted here and can instead be found in the source tree in " -"doc/acquire-additional-files.txt." +"documentation is omitted here and can instead be found in the file &apt-" +"acquire-additional-files; shipped by the apt-doc package." msgstr "" #. type: Content of: @@ -1565,9 +1565,13 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-get.8.xml +#, fuzzy +#| msgid "" +#| "Show upgraded packages; print out a list of all packages that are to be " +#| "upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>." msgid "" -"Show upgraded packages; print out a list of all packages that are to be " -"upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>." +"Do not show a list of all packages that are to be upgraded. Configuration " +"Item: <literal>APT::Get::Show-Upgraded</literal>." msgstr "" "zeigt Pakete, von denen ein Upgrade durchgeführt werden soll; Gibt eine " "Liste aller Pakete aus, von denen ein Upgrade gemacht wurde. " @@ -1955,8 +1959,9 @@ msgstr "" #: apt-get.8.xml msgid "" "Forbid the update command to acquire unverifiable data from configured " -"sources. Apt will fail at the update command for repositories without valid " -"cryptographically signatures. Configuration Item: <literal>Acquire::" +"sources. APT will fail at the update command for repositories without valid " +"cryptographically signatures. See also &apt-secure; for details on the " +"concept and the implications. Configuration Item: <literal>Acquire::" "AllowInsecureRepositories</literal>." msgstr "" @@ -2559,11 +2564,10 @@ msgstr "" msgid "" "Per default <command>depends</command> and <command>rdepends</command> print " "only dependencies explicitly expressed in the metadata. With this flag it " -"will also show dependencies implicitely added based on the encountered " -"data. A <literal>Conflicts: foo</literal> e.g. expresses implicitely that " -"this package also conflicts with the package foo from any other " -"architecture. Configuration Item: <literal>APT::Cache::ShowImplicit</" -"literal>." +"will also show dependencies implicitly added based on the encountered data. " +"A <literal>Conflicts: foo</literal> e.g. expresses implicitly that this " +"package also conflicts with the package foo from any other architecture. " +"Configuration Item: <literal>APT::Cache::ShowImplicit</literal>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> @@ -2681,6 +2685,18 @@ msgstr "" "Benutzung dieser Schlüssel authentifiziert wurden, werden als " "vertrauenswürdig betrachtet." +#. type: Content of: <refentry><refsect1><para> +#: apt-key.8.xml +msgid "" +"Note that if usage of <command>apt-key</command> is desired the additional " +"installation of the GNU Privacy Guard suite (packaged in <package>gnupg</" +"package>) is required. For this reason alone the programmatic usage " +"(especially in package maintainerscripts!) is strongly discouraged. Further " +"more the output format of all commands is undefined and can and does change " +"whenever the underlying commands change. <command>apt-key</command> will try " +"to detect such usage and generates warnings on stderr in these cases." +msgstr "" + #. type: Content of: <refentry><refsect1><title> #: apt-key.8.xml msgid "Commands" @@ -2705,6 +2721,15 @@ msgid "" "otherwise the &apt-secure; infrastructure is completely undermined." msgstr "" +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml +msgid "" +"Instead of using this command a keyring can be placed directly in the " +"<filename>/etc/apt/trusted.gpg.d/</filename> directory with a descriptive " +"name (same rules for filename apply as for &apt-conf; files) and " +"\"<literal>gpg</literal>\" as file extension." +msgstr "" + #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml msgid "Remove a key from the list of trusted keys." @@ -2723,14 +2748,11 @@ msgstr "gibt alle vertrauenswürdigen Schlüssel auf der Standardausgabe aus." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml -msgid "List trusted keys." +#, fuzzy +#| msgid "List trusted keys." +msgid "List trusted keys with fingerprints." msgstr "listet vertrauenswürdige Schlüssel auf." -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt-key.8.xml -msgid "List fingerprints of trusted keys." -msgstr "listet Fingerabdrücke vertrauenswürdiger Schlüssel auf." - #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml msgid "" @@ -2740,6 +2762,11 @@ msgid "" "to completely undermine the &apt-secure; infrastructure if used without care." msgstr "" +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml +msgid "(deprecated)" +msgstr "" + #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml msgid "" @@ -2754,6 +2781,16 @@ msgstr "" "keyring</literal> Ihrer Distribution mitgeliefert, z.B. dem Paket &keyring-" "package; in &keyring-distro;." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml +msgid "" +"Note that a distribution does not need to and in fact should not use this " +"command any longer and instead ship keyring files in the <filename>/etc/apt/" +"trusted.gpg</filename> directory directly as this avoids a dependency on " +"<package>gnupg</package> and it is easier to manage keys by simply adding " +"and removing files for maintainers and users alike." +msgstr "" + #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml msgid "" @@ -2803,39 +2840,6 @@ msgstr "" "<filename>trusted.gpg</filename> der primäre Schlüsselbund wird, d.h. neue " "Schlüssel werden zu diesem hinzugefügt." -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt-key.8.xml -msgid "<filename>/etc/apt/trustdb.gpg</filename>" -msgstr "<filename>/etc/apt/trustdb.gpg</filename>" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt-key.8.xml -msgid "Local trust database of archive keys." -msgstr "lokale Datenbank vertrauenswürdiger Archivschlüssel" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt-key.8.xml -msgid "&keyring-filename;" -msgstr "&keyring-filename;" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt-key.8.xml -msgid "Keyring of &keyring-distro; archive trusted keys." -msgstr "" -"Schlüsselbund vertrauenswürdiger Schlüssel des &keyring-distro;-Archivs" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt-key.8.xml -msgid "&keyring-removed-filename;" -msgstr "&keyring-removed-filename;" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt-key.8.xml -msgid "Keyring of &keyring-distro; archive removed trusted keys." -msgstr "" -"Schlüsselbund entfernter vertrauenswürdiger Schlüssel des &keyring-distro;-" -"Archivs" - #. type: Content of: <refentry><refsect1><para> #: apt-key.8.xml msgid "&apt-get;, &apt-secure;" @@ -3030,7 +3034,9 @@ msgid "" "Starting with version 0.6, <command>APT</command> contains code that does " "signature checking of the Release file for all repositories. This ensures " "that data like packages in the archive can't be modified by people who have " -"no access to the Release file signing key." +"no access to the Release file signing key. Starting with version 1.1 " +"<command>APT</command> requires repositories to provide recent " +"authentication information for unimpeded usage of the repository." msgstr "" "Beginnend mit Version 0.6 enthält <command>apt</command> Code, der die " "Signatur der Release-Datei für alle Archive prüft. Dies stellt sicher, dass " @@ -3041,20 +3047,48 @@ msgstr "" #: apt-secure.8.xml msgid "" "If an archive has an unsigned Release file or no Release file at all current " -"APT versions will raise a warning in <command>update</command> operations " -"and front-ends like <command>apt-get</command> will require explicit " -"confirmation if an installation request includes a package from such an " -"unauthenticated archive." +"APT versions will refuse to download data from them by default in " +"<command>update</command> operations and even if forced to download front-" +"ends like &apt-get; will require explicit confirmation if an installation " +"request includes a package from such an unauthenticated archive." msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt-secure.8.xml msgid "" -"In the future APT will refuse to work with unauthenticated repositories by " -"default until support for them is removed entirely. Users have the option to " -"opt-in to this behavior already by setting the configuration option " -"<option>Acquire::AllowInsecureRepositories</option> to <literal>false</" -"literal>." +"As a temporary exception &apt-get; (not &apt;!) raises warnings only if it " +"encounters unauthenticated archives to give a slightly longer grace period " +"on this backward compatibility effecting change. This exception will be " +"removed in future releases and you can opt-out of this grace period by " +"setting the configuration option <option>Binary::apt-get::Acquire::" +"AllowInsecureRepositories</option> to <literal>false</literal> or <option>--" +"no-allow-insecure-repositories</option> on the command line." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml +msgid "" +"You can force all APT clients to raise only warnings by setting the " +"configuration option <option>Acquire::AllowInsecureRepositories</option> to " +"<literal>true</literal>. Individual repositories can also be allowed to be " +"insecure via the &sources-list; option <literal>allow-insecure=yes</" +"literal>. Note that insecure repositories are strongly discouraged and all " +"options to force apt to continue supporting them will eventually be " +"removed. Users also have the <option>Trusted</option> option available to " +"disable even the warnings, but be sure to understand the implications as " +"detailed in &sources-list;." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml +msgid "" +"A repository which previously was authentication but would loose this state " +"in an <command>update</command> operation raises an error in all APT clients " +"irrespective of the option to allow or forbid usage of insecure " +"repositories. The error can be overcome by additionally setting " +"<option>Acquire::AllowDowngradeToInsecureRepositories</option> to " +"<literal>true</literal> or for Individual repositories with the &sources-" +"list; option <literal>allow-downgrade-to-insecure=yes</literal>." msgstr "" #. type: Content of: <refentry><refsect1><para> @@ -4046,6 +4080,33 @@ msgstr "" "werden der vorgegebenen Liste hinzugefügt, wenn sie per <command>dpkg --" "print-architectures</command> registriert werden." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml +msgid "" +"This scope defines which compression formats are supported, how compression " +"and decompression can be performed if support for this format isn't built " +"into apt directly and a cost-value indicating how costly it is to compress " +"something in this format. As an example the following configuration stanza " +"would allow apt to download and uncompress as well as create and store files " +"with the low-cost <literal>.reversed</literal> file extension which it will " +"pass to the command <command>rev</command> without additional commandline " +"parameters for compression and uncompression:" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><informalexample><programlisting> +#: apt.conf.5.xml +#, no-wrap +msgid "" +"APT::Compressor::rev {\n" +"\tName \"rev\";\n" +"\tExtension \".reversed\";\n" +"\tBinary \"rev\";\n" +"\tCompressArg {};\n" +"\tUncompressArg {};\n" +"\tCost \"10\";\n" +"};\n" +msgstr "" + #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml msgid "" @@ -4065,13 +4126,13 @@ msgstr "" msgid "" "Default release to install packages from if more than one version is " "available. Contains release name, codename or release version. Examples: " -"'stable', 'testing', 'unstable', '&stable-codename;', '&testing-codename;', " -"'4.0', '5.0*'. See also &apt-preferences;." +"'stable', 'testing', 'unstable', '&debian-stable-codename;', '&debian-" +"testing-codename;', '4.0', '5.0*'. See also &apt-preferences;." msgstr "" "Standard-Release von dem Pakete installiert werden, wenn mehr als eine " "Version verfügbar ist. Enthält Release-Name, Codename oder Release-Version. " -"Beispiele: »stable«, »testing, »unstable«, »&stable-codename;«, »&testing-" -"codename;«, »4.0«, »5.0*«. Siehe auch &apt-preferences;." +"Beispiele: »stable«, »testing, »unstable«, »&debian-stable-codename;«, " +"»&debian-testing-codename;«, »4.0«, »5.0*«. Siehe auch &apt-preferences;." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml @@ -4586,16 +4647,30 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml +#, fuzzy +#| msgid "" +#| "<literal>Acquire::http::Proxy-Auto-Detect</literal> can be used to " +#| "specify an external command to discover the http proxy to use. Apt " +#| "expects the command to output the proxy on stdout in the style " +#| "<literal>http://proxy:port/</literal>. This will override the generic " +#| "<literal>Acquire::http::Proxy</literal> but not any specific host proxy " +#| "configuration set via <literal>Acquire::http::Proxy::$HOST</literal>. " +#| "See the &squid-deb-proxy-client; package for an example implementation " +#| "that uses avahi. This option takes precedence over the legacy option name " +#| "<literal>ProxyAutoDetect</literal>." msgid "" "<literal>Acquire::http::Proxy-Auto-Detect</literal> can be used to specify " -"an external command to discover the http proxy to use. Apt expects the " -"command to output the proxy on stdout in the style <literal>http://proxy:" -"port/</literal>. This will override the generic <literal>Acquire::http::" -"Proxy</literal> but not any specific host proxy configuration set via " -"<literal>Acquire::http::Proxy::$HOST</literal>. See the &squid-deb-proxy-" -"client; package for an example implementation that uses avahi. This option " -"takes precedence over the legacy option name <literal>ProxyAutoDetect</" -"literal>." +"an external command to discover the http proxy to use. The first and only " +"parameter is an URI denoting the host to be contacted to allow for host-" +"specific configuration. APT expects the command to output the proxy on " +"stdout as a single line in the style <literal>http://proxy:port/</literal> " +"or the word <literal>DIRECT</literal> if no proxy should be used. No output " +"indicates that the generic proxy settings should be used. Note that auto-" +"detection will not be used for a host if a host-specific proxy configuration " +"is already set via <literal>Acquire::http::Proxy::<replaceable>HOST</" +"replaceable></literal>. See the &squid-deb-proxy-client; package for an " +"example implementation that uses avahi. This option takes precedence over " +"the legacy option name <literal>ProxyAutoDetect</literal>." msgstr "" "<literal>Acquire::http::Proxy-Auto-Detect</literal> kann benutzt werden, um " "einen externen Befehl zum Auffinden des HTTP-Proxys anzugeben, der benutzt " @@ -4792,14 +4867,23 @@ msgstr "Acquire::CompressionTypes::<replaceable>Dateierweiterung</replaceable> \ #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml +#, fuzzy +#| msgid "" +#| "List of compression types which are understood by the acquire methods. " +#| "Files like <filename>Packages</filename> can be available in various " +#| "compression formats. By default the acquire methods can decompress " +#| "<command>bzip2</command>, <command>lzma</command> and <command>gzip</" +#| "command> compressed files; with this setting more formats can be added on " +#| "the fly or the used method can be changed. The syntax for this is: " +#| "<placeholder type=\"synopsis\" id=\"0\"/>" msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " -"compression formats. By default the acquire methods can decompress " -"<command>bzip2</command>, <command>lzma</command> and <command>gzip</" -"command> compressed files; with this setting more formats can be added on " -"the fly or the used method can be changed. The syntax for this is: " -"<placeholder type=\"synopsis\" id=\"0\"/>" +"compression formats. By default the acquire methods can decompress and " +"recompress many common formats like <command>xz</command> and <command>gzip</" +"command>; with this scope the supported formats can be queried, modified as " +"well as support for more formats added (see also <option>APT::Compressor</" +"option>). The syntax for this is: <placeholder type=\"synopsis\" id=\"0\"/>" msgstr "" "Liste der Kompressionstypen die von den »acquire«-Methoden verstanden " "werden. Dateien wie <filename>Packages</filename> können in verschiedenen " @@ -4818,26 +4902,41 @@ msgstr "Acquire::CompressionTypes::Order:: \"gz\";" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis> #: apt.conf.5.xml -#, no-wrap -msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" +#, fuzzy, no-wrap +#| msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" +msgid "Acquire::CompressionTypes::Order { \"xz\"; \"gz\"; };" msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml +#, fuzzy +#| msgid "" +#| "Also, the <literal>Order</literal> subgroup can be used to define in " +#| "which order the acquire system will try to download the compressed files. " +#| "The acquire system will try the first and proceed with the next " +#| "compression type in this list on error, so to prefer one over the other " +#| "type simply add the preferred type first - default types not already " +#| "added will be implicitly appended to the end of the list, so e.g. " +#| "<placeholder type=\"synopsis\" id=\"0\"/> can be used to prefer " +#| "<command>gzip</command> compressed files over <command>bzip2</command> " +#| "and <command>lzma</command>. If <command>lzma</command> should be " +#| "preferred over <command>gzip</command> and <command>bzip2</command> the " +#| "configure setting should look like this: <placeholder type=\"synopsis\" " +#| "id=\"1\"/> It is not needed to add <literal>bz2</literal> to the list " +#| "explicitly as it will be added automatically." msgid "" "Also, the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " "acquire system will try the first and proceed with the next compression type " "in this list on error, so to prefer one over the other type simply add the " -"preferred type first - default types not already added will be implicitly " -"appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id=" -"\"0\"/> can be used to prefer <command>gzip</command> compressed files over " -"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</" -"command> should be preferred over <command>gzip</command> and " -"<command>bzip2</command> the configure setting should look like this: " -"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add " -"<literal>bz2</literal> to the list explicitly as it will be added " -"automatically." +"preferred type first - types not already added will be implicitly appended " +"to the end of the list, so e.g. <placeholder type=\"synopsis\" id=\"0\"/> " +"can be used to prefer <command>gzip</command> compressed files over all " +"other compression formats. If <command>xz</command> should be preferred " +"over <command>gzip</command> and <command>bzip2</command> the configure " +"setting should look like this: <placeholder type=\"synopsis\" id=\"1\"/> It " +"is not needed to add <literal>bz2</literal> to the list explicitly as it " +"will be added automatically." msgstr "" "Außerdem kann die Untergruppe <literal>Order</literal> benutzt werden, um zu " "definieren, in welcher Reihenfolge das Beschaffungssystem die komprimierten " @@ -4862,17 +4961,30 @@ msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml +#, fuzzy +#| msgid "" +#| "Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></" +#| "literal> will be checked at run time. If this option has been set, the " +#| "method will only be used if this file exists; e.g. for the " +#| "<literal>bzip2</literal> method (the inbuilt) setting is: <placeholder " +#| "type=\"literallayout\" id=\"0\"/> Note also that list entries specified " +#| "on the command line will be added at the end of the list specified in the " +#| "configuration files, but before the default entries. To prefer a type in " +#| "this case over the ones specified in the configuration files you can set " +#| "the option direct - not in list style. This will not override the " +#| "defined list; it will only prefix the list with this type." msgid "" "Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></" -"literal> will be checked at run time. If this option has been set, the " -"method will only be used if this file exists; e.g. for the <literal>bzip2</" -"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout" -"\" id=\"0\"/> Note also that list entries specified on the command line will " -"be added at the end of the list specified in the configuration files, but " -"before the default entries. To prefer a type in this case over the ones " -"specified in the configuration files you can set the option direct - not in " -"list style. This will not override the defined list; it will only prefix " -"the list with this type." +"literal> will be checked at run time. If this option has been set and " +"support for this format isn't directly built into apt, the method will only " +"be used if this file exists; e.g. for the <literal>bzip2</literal> method " +"(the inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> " +"Note also that list entries specified on the command line will be added at " +"the end of the list specified in the configuration files, but before the " +"default entries. To prefer a type in this case over the ones specified in " +"the configuration files you can set the option direct - not in list style. " +"This will not override the defined list; it will only prefix the list with " +"this type." msgstr "" "Beachten Sie, dass <literal>Dir::Bin::<replaceable>Methodenname</" "replaceable></literal> zur Laufzeit geprüft wird. Falls diese Option gesetzt " @@ -5021,21 +5133,30 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml msgid "" -"Allow the update operation to load data files from a repository without a " -"trusted signature. If enabled this option no data files will be loaded and " -"the update operation fails with a error for this source. The default is " -"false for backward compatibility. This will be changed in the future." +"Allow update operations to load data files from repositories without " +"sufficient security information. The default value is \"<literal>false</" +"literal>\". Concept, implications as well as alternatives are detailed in " +"&apt-secure;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml +msgid "" +"Allow update operations to load data files from repositories which provide " +"security information, but these are deemed no longer cryptographically " +"strong enough. The default value is \"<literal>false</literal>\". Concept, " +"implications as well as alternatives are detailed in &apt-secure;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml msgid "" "Allow that a repository that was previously gpg signed to become unsigned " -"durign a update operation. When there is no valid signature of a perviously " -"trusted repository apt will refuse the update. This option can be used to " -"override this protection. You almost certainly never want to enable this. " -"The default is false. Note that apt will still consider packages from this " -"source untrusted and warn about them if you try to install them." +"during an update operation. When there is no valid signature for a " +"previously trusted repository apt will refuse the update. This option can be " +"used to override this protection. You almost certainly never want to enable " +"this. The default is <literal>false</literal>. Concept, implications as " +"well as alternatives are detailed in &apt-secure;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> @@ -5473,139 +5594,22 @@ msgstr "" "übermittelt. Standardmäßig wird das Signieren augeschaltet und alle " "Programme werden erstellt." -#. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml -msgid "dpkg trigger usage (and related options)" -msgstr "Dpkd-Trigger-Benutzung (und zugehörige Optionen)" - -#. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml -msgid "" -"APT can call &dpkg; in such a way as to let it make aggressive use of " -"triggers over multiple calls of &dpkg;. Without further options &dpkg; will " -"use triggers once each time it runs. Activating these options can therefore " -"decrease the time needed to perform the install or upgrade. Note that it is " -"intended to activate these options per default in the future, but as it " -"drastically changes the way APT calls &dpkg; it needs a lot more testing. " -"<emphasis>These options are therefore currently experimental and should not " -"be used in production environments.</emphasis> It also breaks progress " -"reporting such that all front-ends will currently stay around half (or more) " -"of the time in the 100% state while it actually configures all packages." -msgstr "" -"APT kann &dpkg; auf eine Art aufrufen, in der aggressiv Gebrauch von " -"Triggern über mehrere &dpkg;-Aufrufe hinweg gemacht wird. Ohne weitere " -"Optionen wird &dpkg; Trigger nur einmal bei jeder Ausführung benutzen. Diese " -"Optionen zu aktivieren, kann daher die zum Installieren oder Upgrade " -"benötigte Zeit verkürzen. Beachten Sie, dass geplant ist, diese Optionen in " -"Zukunft standardmäßig zu aktivieren, aber da es die Art, wie APT &dpkg; " -"aufruft, drastisch ändert, benötigt es noch viele weitere Tests. " -"<emphasis>Diese Optionen sind daher aktuell noch experimentell und sollten " -"nicht in produktiven Umgebungen benutzt werden.</emphasis> Außerdem " -"unterbricht es die Fortschrittsanzeige, so dass alle Oberflächen derzeit die " -"halbe (oder mehr) Zeit auf dem Status 100% stehen, während tatsächlich alle " -"Pakete konfiguriert werden." - -#. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml -#, no-wrap -msgid "" -"DPkg::NoTriggers \"true\";\n" -"PackageManager::Configure \"smart\";\n" -"DPkg::ConfigurePending \"true\";\n" -"DPkg::TriggersPending \"true\";" -msgstr "" -"DPkg::NoTriggers \"true\";\n" -"PackageManager::Configure \"smart\";\n" -"DPkg::ConfigurePending \"true\";\n" -"DPkg::TriggersPending \"true\";" - -#. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml -msgid "" -"Note that it is not guaranteed that APT will support these options or that " -"these options will not cause (big) trouble in the future. If you have " -"understand the current risks and problems with these options, but are brave " -"enough to help testing them, create a new configuration file and test a " -"combination of options. Please report any bugs, problems and improvements " -"you encounter and make sure to note which options you have used in your " -"reports. Asking &dpkg; for help could also be useful for debugging proposes, " -"see e.g. <command>dpkg --audit</command>. A defensive option combination " -"would be <placeholder type=\"literallayout\" id=\"0\"/>" -msgstr "" -"Beachten Sie, dass es nicht gewährleistet ist, dass APT diese Optionen " -"unterstützen wird oder dass diese Optionen in der Zukunft keinen (großen) " -"Ärger machen. Wenn Sie die allgemeinen Risiken und Probleme mit diesen " -"Optionen verstanden haben, aber tapfer genug sind, sie testen zu helfen, " -"erstellen Sie eine neue Konfigurationsdatei und testen Sie eine Kombination " -"von Optionen. Bitte berichten Sie auf Englisch jegliche Fehler, Probleme und " -"Verbesserungen, denen Sie begegnen und stellen Sie sicher, dass Sie alle von " -"Ihnen benutzten Optionen in Ihren Berichten vermerken. Zum Zweck der " -"Fehlersuche könnte es außerdem nützlich sein, &dpkg; um Hilfe zu fragen. " -"Lesen Sie z.B. <command>dpkg --audit</command>. Eine defensive " -"Optionenkombination wäre <placeholder type=\"literallayout\" id=\"0\"/>" - -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml -msgid "" -"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending " -"call). See &dpkg; if you are interested in what this actually means. In " -"short: &dpkg; will not run the triggers when this flag is present unless it " -"is explicitly called to do so in an extra call. Note that this option " -"exists (undocumented) also in older APT versions with a slightly different " -"meaning: Previously these option only append --no-triggers to the configure " -"calls to &dpkg; - now APT will also add this flag to the unpack and remove " -"calls." -msgstr "" -"fügt die keine-Trigger-Markierung zu allen &dpkg; Aufrufen hinzu " -"(ausgenommen den ConfigurePending-Aufruf). Siehe &dpkg;, wenn Sie " -"interessiert sind, was dies tatsächlich bedeutet. In Kürze: &dpkg; wird die " -"Trigger nicht ausführen, dann ist diese Markierung vorhanden, außer sie wird " -"explizit aufgerufen, um dies in einem gesonderten Aufruf zu tun. Beachten " -"Sie, dass diese Option außerdem in älteren APT-Versionen mit einer " -"geringfügig anderen Bedeutung existiert (nicht dokumentiert): Vorher hing " -"diese Option nur --no-triggers an die Konfigurationsaufrufe für &dpkg; an – " -"nun wird APT diese Markierung außerdem an die »unpack«- und »remove«-Aufrufe " -"anhängen." - -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml -msgid "" -"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " -"and \"<literal>no</literal>\". The default value is \"<literal>all</literal>" -"\", which causes APT to configure all packages. The \"<literal>smart</" -"literal>\" way is to configure only packages which need to be configured " -"before another package can be unpacked (Pre-Depends), and let the rest be " -"configured by &dpkg; with a call generated by the ConfigurePending option " -"(see below). On the other hand, \"<literal>no</literal>\" will not configure " -"anything, and totally relies on &dpkg; for configuration (which at the " -"moment will fail if a Pre-Depends is encountered). Setting this option to " -"any value other than <literal>all</literal> will implicitly also activate " -"the next option by default, as otherwise the system could end in an " -"unconfigured and potentially unbootable state." -msgstr "" -"Gültige Werte sind »<literal>all</literal>«, »<literal>smart</literal>« und " -"»<literal>no</literal>«. Der Standardwert ist »<literal>all</literal>«, was " -"APT veranlasst, alle Pakete zu konfigurieren. Die Art von »<literal>smart</" -"literal>« ist es, nur die Pakete zu konfigurieren, die konfiguriert werden " -"müssen, bevor ein anderes Paket entpackt werden kann (Pre-Depends), und den " -"Rest von &dpkg; mit einem Aufruf, der durch die Option ConfigurePending " -"(siehe unten) generiert wurde, konfigurieren zu lassen. Im Gegensatz dazu " -"wird »<literal>no</literal>« nichts konfigurieren und sich völlig auf die " -"Konfiguration durch &dpkg; verlassen (was im Moment fehlschlägt, falls ein " -"Pre-Depends vorkommt). Diese Option auf etwas anderes als <literal>all</" -"literal> zu setzen, wird außerdem implizit standardmäßig die nächste Option " -"aktivieren, da das System anderenfalls in einem nicht konfigurierten Status " -"enden könnte und möglicherweise nicht mehr startbar ist." - -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml +#, fuzzy +#| msgid "" +#| "If this option is set APT will call <command>dpkg --configure --pending</" +#| "command> to let &dpkg; handle all required configurations and triggers. " +#| "This option is activated automatically per default if the previous option " +#| "is not set to <literal>all</literal>, but deactivating it could be useful " +#| "if you want to run APT multiple times in a row - e.g. in an installer. In " +#| "these sceneries you could deactivate this option in all but the last run." msgid "" "If this option is set APT will call <command>dpkg --configure --pending</" "command> to let &dpkg; handle all required configurations and triggers. This " -"option is activated automatically per default if the previous option is not " -"set to <literal>all</literal>, but deactivating it could be useful if you " -"want to run APT multiple times in a row - e.g. in an installer. In these " -"sceneries you could deactivate this option in all but the last run." +"option is activated by default, but deactivating it could be useful if you " +"want to run APT multiple times in a row - e.g. in an installer. In this " +"scenario you could deactivate this option in all but the last run." msgstr "" "Wenn diese Option gesetzt ist, wird APT <command>dpkg --configure --pending</" "command> aufrufen, um &dpkg; alle benötigten Konfigurationen und Trigger " @@ -5616,64 +5620,6 @@ msgstr "" "könnten Sie diese Option außer in allen außer der letzten Ausführung " "deaktivieren." -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml -msgid "" -"Useful for the <literal>smart</literal> configuration as a package which has " -"pending triggers is not considered as <literal>installed</literal>, and " -"&dpkg; treats them as <literal>unpacked</literal> currently which is a " -"showstopper for Pre-Dependencies (see debbugs #526774). Note that this will " -"process all triggers, not only the triggers needed to configure this package." -msgstr "" -"nützlich für <literal>smart</literal>-Konfiguration, da ein Paket mit " -"ausstehenden Triggern nicht als <literal>installed</literal> angesehen wird " -"und Dpkg es als aktuell entpackt betrachtet, was ein Hemmschuh für Pre-" -"Dependencies ist (siehe Debian-Fehler #526774). Beachten Sie, dass dies alle " -"Trigger ausführt, nicht nur die Trigger, die zum Konfigurieren dieses Pakets " -"benötigt werden." - -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml -#, no-wrap -msgid "" -"OrderList::Score {\n" -"\tDelete 500;\n" -"\tEssential 200;\n" -"\tImmediate 10;\n" -"\tPreDepends 50;\n" -"};" -msgstr "" -"OrderList::Score {\n" -"\tDelete 500;\n" -"\tEssential 200;\n" -"\tImmediate 10;\n" -"\tPreDepends 50;\n" -"};" - -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml -msgid "" -"Essential packages (and their dependencies) should be configured immediately " -"after unpacking. It is a good idea to do this quite early in the upgrade " -"process as these configure calls also currently require <literal>DPkg::" -"TriggersPending</literal> which will run quite a few triggers (which may not " -"be needed). Essentials get per default a high score but the immediate flag " -"is relatively low (a package which has a Pre-Depends is rated higher). " -"These option and the others in the same group can be used to change the " -"scoring. The following example shows the settings with their default " -"values. <placeholder type=\"literallayout\" id=\"0\"/>" -msgstr "" -"Essentielle Pakete (und ihre Abhängigkeiten) sollten sofort nach dem " -"Entpacken konfiguriert werden. Es ist eine gute Idee, dies ziemlich früh im " -"Upgrade-Prozess zu tun, da diese Konfigurationsaufrufe aktuell außerdem " -"<literal>DPkg::TriggersPending</literal> benötigen, das eine Reihe von " -"Triggern ausführt (die möglicherweise nicht gebraucht werden). Essentielle " -"Pakete haben als Vorgabe eine hohe Bewertung, aber die Unmittelbarmarkierung " -"ist relativ niedrig (ein Paket, das Pre-Depends hat, wird höher bewertet). " -"Diese Option und die anderen in der gleichen Gruppe können benutzt werden, " -"um die Bewertung zu ändern. Das folgende Beispiel zeigt die Einstellungen " -"mit ihren Vorgabewerten. <placeholder type=\"literallayout\" id=\"0\"/>" - #. type: Content of: <refentry><refsect1><title> #: apt.conf.5.xml msgid "Periodic and Archives options" @@ -5684,14 +5630,14 @@ msgstr "Periodische- und Archivoptionen" msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by the " -"<literal>/etc/cron.daily/apt</literal> script. See the top of this script " -"for the brief documentation of these options." +"<literal>/usr/lib/apt/apt.systemd.daily</literal> script. See the top of " +"this script for the brief documentation of these options." msgstr "" "<literal>APT::Periodic</literal>- und <literal>APT::Archives</literal>-" "Gruppen von Optionen konfigurieren das Verhalten periodischer APT-" -"Aktualisierungen, die vom Skript <literal>/etc/cron.daily/apt</literal> " -"durchgeführt werden. Lesen Sie die Kopfzeilen dieses Skripts, um eine kurze " -"Dokumentation dieser Optionen zu erhalten." +"Aktualisierungen, die vom Skript <literal>/usr/lib/apt/apt.systemd.daily</" +"literal> durchgeführt werden. Lesen Sie die Kopfzeilen dieses Skripts, um " +"eine kurze Dokumentation dieser Optionen zu erhalten." #. type: Content of: <refentry><refsect1><title> #: apt.conf.5.xml @@ -6556,23 +6502,23 @@ msgstr "" #: apt_preferences.5.xml msgid "" "The following record assigns a high priority to all package versions " -"belonging to any distribution whose Codename is \"<literal>&testing-codename;" -"</literal>\"." +"belonging to any distribution whose Codename is \"<literal>&debian-testing-" +"codename;</literal>\"." msgstr "" "Der folgende Datensatz weist allen Paketversionen, die zu einer Distribution " -"gehören, deren Codename »<literal>&testing-codename;</literal>« ist, eine " -"hohe Priorität zu." +"gehören, deren Codename »<literal>&debian-testing-codename;</literal>« ist, " +"eine hohe Priorität zu." #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> #: apt_preferences.5.xml #, no-wrap msgid "" "Package: *\n" -"Pin: release n=&testing-codename;\n" +"Pin: release n=&debian-testing-codename;\n" "Pin-Priority: 900\n" msgstr "" "Package: *\n" -"Pin: release n=&testing-codename;\n" +"Pin: release n=&debian-testing-codename;\n" "Pin-Priority: 900\n" #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara> @@ -6580,22 +6526,24 @@ msgstr "" msgid "" "The following record assigns a high priority to all package versions " "belonging to any release whose Archive name is \"<literal>stable</literal>\" " -"and whose release Version number is \"<literal>&stable-version;</literal>\"." +"and whose release Version number is \"<literal>&debian-stable-version;</" +"literal>\"." msgstr "" "Der folgende Datensatz weist allen Paketversionen, die zu einer Distribution " "gehören, deren Archivname »<literal>stable</literal>« und deren Release-" -"Nummer »<literal>&stable-version;</literal>« ist, eine hohe Priorität zu." +"Nummer »<literal>&debian-stable-version;</literal>« ist, eine hohe Priorität " +"zu." #. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting> #: apt_preferences.5.xml #, no-wrap msgid "" "Package: *\n" -"Pin: release a=stable, v=&stable-version;\n" +"Pin: release a=stable, v=&debian-stable-version;\n" "Pin-Priority: 500\n" msgstr "" "Package: *\n" -"Pin: release a=stable, v=&stable-version;\n" +"Pin: release a=stable, v=&debian-stable-version;\n" "Pin-Priority: 500\n" #. type: Content of: <refentry><refsect1><refsect2><para> @@ -6953,21 +6901,21 @@ msgid "" "The <filename>Release</filename> file is normally found in the directory " "<filename>.../dists/<replaceable>dist-name</replaceable></filename>: for " "example, <filename>.../dists/stable/Release</filename>, or <filename>.../" -"dists/&stable-codename;/Release</filename>. It consists of a single multi-" -"line record which applies to <emphasis>all</emphasis> of the packages in the " -"directory tree below its parent. Unlike the <filename>Packages</filename> " -"file, nearly all of the lines in a <filename>Release</filename> file are " -"relevant for setting APT priorities:" +"dists/&debian-stable-codename;/Release</filename>. It consists of a single " +"multi-line record which applies to <emphasis>all</emphasis> of the packages " +"in the directory tree below its parent. Unlike the <filename>Packages</" +"filename> file, nearly all of the lines in a <filename>Release</filename> " +"file are relevant for setting APT priorities:" msgstr "" "Die <filename>Release</filename>-Datei ist normalerweise im Verzeichnis " "<filename>…/dists/<replaceable>Distributionsname</replaceable></filename> zu " "finden, zum Beispiel <filename>…/dists/stable/Release</filename> oder " -"<filename>…/dists/&stable-codename;/Release</filename>. Sie besteht aus " -"einem einzelnen mehrzeiligen Datensatz, der auf <emphasis>alle</emphasis> " -"Pakete im Verzeichnisbaum unterhalb des übergeordneten Verzeichnisses " -"zutrifft. Anders als die <filename>Packages</filename>-Datei sind nahezu " -"alle Zeilen in einer <filename>Release</filename>-Datei für das Setzen von " -"APT-Prioritäten relevant:" +"<filename>…/dists/&debian-stable-codename;/Release</filename>. Sie besteht " +"aus einem einzelnen mehrzeiligen Datensatz, der auf <emphasis>alle</" +"emphasis> Pakete im Verzeichnisbaum unterhalb des übergeordneten " +"Verzeichnisses zutrifft. Anders als die <filename>Packages</filename>-Datei " +"sind nahezu alle Zeilen in einer <filename>Release</filename>-Datei für das " +"Setzen von APT-Prioritäten relevant:" #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> #: apt_preferences.5.xml @@ -7006,38 +6954,38 @@ msgstr "die <literal>Codename:</literal>-Zeile" #: apt_preferences.5.xml msgid "" "names the codename to which all the packages in the directory tree belong. " -"For example, the line \"Codename: &testing-codename;\" specifies that all of " -"the packages in the directory tree below the parent of the " -"<filename>Release</filename> file belong to a version named " -"<literal>&testing-codename;</literal>. Specifying this value in the APT " -"preferences file would require the line:" +"For example, the line \"Codename: &debian-testing-codename;\" specifies that " +"all of the packages in the directory tree below the parent of the " +"<filename>Release</filename> file belong to a version named <literal>&debian-" +"testing-codename;</literal>. Specifying this value in the APT preferences " +"file would require the line:" msgstr "" "benennt den Codenamen, zu dem alle Pakete im Verzeichnisbaum gehören. Die " -"Zeile »Codename: &testing-codename;« gibt zum Beispiel an, dass alle Pakete " -"im Verzeichnisbaum unterhalb des der <filename>Release</filename>-Datei " -"übergeordneten Verzeichnisses zu einer Version mit Namen <literal>&testing-" -"codename;</literal> gehören. Diesen Wert in der APT-Einstellungsdatei " -"anzugeben würde die folgende Zeile benötigen:" +"Zeile »Codename: &debian-testing-codename;« gibt zum Beispiel an, dass alle " +"Pakete im Verzeichnisbaum unterhalb des der <filename>Release</filename>-" +"Datei übergeordneten Verzeichnisses zu einer Version mit Namen " +"<literal>&debian-testing-codename;</literal> gehören. Diesen Wert in der APT-" +"Einstellungsdatei anzugeben würde die folgende Zeile benötigen:" #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting> #: apt_preferences.5.xml #, no-wrap -msgid "Pin: release n=&testing-codename;\n" -msgstr "Pin: release n=&testing-codename;\n" +msgid "Pin: release n=&debian-testing-codename;\n" +msgstr "Pin: release n=&debian-testing-codename;\n" #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara> #: apt_preferences.5.xml msgid "" "names the release version. For example, the packages in the tree might " -"belong to Debian release version &stable-version;. Note that there is " -"normally no version number for the <literal>testing</literal> and " +"belong to Debian release version &debian-stable-version;. Note that there " +"is normally no version number for the <literal>testing</literal> and " "<literal>unstable</literal> distributions because they have not been " "released yet. Specifying this in the APT preferences file would require one " "of the following lines." msgstr "" "benennt die Release-Version. Die Pakete im Baum könnten zum Beispiel zur " -"Debian-Release-Version &stable-version; gehören. Beachten Sie, dass es " -"normalerweise keine Versionsnummer für <literal>testing</literal>- und " +"Debian-Release-Version &debian-stable-version; gehören. Beachten Sie, dass " +"es normalerweise keine Versionsnummer für <literal>testing</literal>- und " "<literal>unstable</literal>-Distributionen gibt, weil sie noch nicht " "veröffentlicht wurden. Diese in der APT-Einstellungsdatei anzugeben würde " "eine der folgenden Zeilen benötigen:" @@ -7046,13 +6994,13 @@ msgstr "" #: apt_preferences.5.xml #, no-wrap msgid "" -"Pin: release v=&stable-version;\n" -"Pin: release a=stable, v=&stable-version;\n" -"Pin: release &stable-version;\n" +"Pin: release v=&debian-stable-version;\n" +"Pin: release a=stable, v=&debian-stable-version;\n" +"Pin: release &debian-stable-version;\n" msgstr "" -"Pin: release v=&stable-version;\n" -"Pin: release a=stable, v=&stable-version;\n" -"Pin: release &stable-version;\n" +"Pin: release v=&debian-stable-version;\n" +"Pin: release a=stable, v=&debian-stable-version;\n" +"Pin: release &debian-stable-version;\n" #. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term> #: apt_preferences.5.xml @@ -7360,9 +7308,9 @@ msgstr "Die Entwicklung eines Codename-Releases verfolgen" #, no-wrap msgid "" "Explanation: Uninstall or do not install any Debian-originated package versions\n" -"Explanation: other than those in the distribution codenamed with &testing-codename; or sid\n" +"Explanation: other than those in the distribution codenamed with &debian-testing-codename; or sid\n" "Package: *\n" -"Pin: release n=&testing-codename;\n" +"Pin: release n=&debian-testing-codename;\n" "Pin-Priority: 900\n" "\n" "Explanation: Debian unstable is always codenamed with sid\n" @@ -7375,10 +7323,10 @@ msgid "" "Pin-Priority: -10\n" msgstr "" "Explanation: Deinstallieren oder nicht installieren von anderen von Debian\n" -"Explanation: stammenden Paketversionen als denen der &testing-codename;-\n" +"Explanation: stammenden Paketversionen als denen der &debian-testing-codename;-\n" "Explanation: oder Sid-Distribution\n" "Package: *\n" -"Pin: release n=&testing-codename;\n" +"Pin: release n=&debian-testing-codename;\n" "Pin-Priority: 900\n" "\n" "Explanation: Debian-Unstable hat immer den Codenamen sid\n" @@ -7421,13 +7369,14 @@ msgstr "" msgid "" "With a suitable &sources-list; file and the above preferences file, any of " "the following commands will cause APT to upgrade to the latest version(s) in " -"the release codenamed with <literal>&testing-codename;</literal>. " +"the release codenamed with <literal>&debian-testing-codename;</literal>. " "<placeholder type=\"programlisting\" id=\"0\"/>" msgstr "" "Mit einer geeigneten &sources-list;-Datei und der obigen Einstellungsdatei " "wird jeder der folgenden Befehle APT veranlassen, ein Upgrade auf die " -"letzte(n) Version(en) im Release mit Codenamen <literal>&testing-codename;</" -"literal> durchzuführen. <placeholder type=\"programlisting\" id=\"0\"/>" +"letzte(n) Version(en) im Release mit Codenamen <literal>&debian-testing-" +"codename;</literal> durchzuführen. <placeholder type=\"programlisting\" id=" +"\"0\"/>" #. type: Content of: <refentry><refsect1><refsect2><para><programlisting> #: apt_preferences.5.xml @@ -7441,16 +7390,16 @@ msgid "" "The following command will cause APT to upgrade the specified package to the " "latest version from the <literal>sid</literal> distribution. Thereafter, " "<command>apt-get upgrade</command> will upgrade the package to the most " -"recent <literal>&testing-codename;</literal> version if that is more recent " -"than the installed version, otherwise, to the most recent <literal>sid</" -"literal> version if that is more recent than the installed version. " -"<placeholder type=\"programlisting\" id=\"0\"/>" +"recent <literal>&debian-testing-codename;</literal> version if that is more " +"recent than the installed version, otherwise, to the most recent " +"<literal>sid</literal> version if that is more recent than the installed " +"version. <placeholder type=\"programlisting\" id=\"0\"/>" msgstr "" "Der folgende Befehl wird APT veranlassen, ein Upgrade des angegebenen Pakets " "auf die letzte Version der <literal>sid</literal>-Distribution " "durchzuführen. Danach wird <command>apt-get upgrade</command> ein Upgrade " -"des Pakets auf die aktuellste <literal>&testing-codename;</literal>-Version " -"durchführen, wenn diese aktueller als die installierte Version ist, " +"des Pakets auf die aktuellste <literal>&debian-testing-codename;</literal>-" +"Version durchführen, wenn diese aktueller als die installierte Version ist, " "andernfalls auf die aktuellste <literal>sid</literal>-Version, wenn diese " "aktueller als die installierte Version ist. <placeholder type=" "\"programlisting\" id=\"0\"/>" @@ -7624,9 +7573,9 @@ msgstr "Die Typen deb und deb-src" #| "archive, <filename>distribution/component</filename>. The " #| "<literal>distribution</literal> is generally an archive name like " #| "<literal>stable</literal> or <literal>testing</literal> or a codename " -#| "like <literal>&stable-codename;</literal> or <literal>&testing-codename;</" -#| "literal> while component is one of <literal>main</literal>, " -#| "<literal>contrib</literal> or <literal>non-free</literal>. The " +#| "like <literal>&debian-stable-codename;</literal> or <literal>&debian-" +#| "testing-codename;</literal> while component is one of <literal>main</" +#| "literal>, <literal>contrib</literal> or <literal>non-free</literal>. The " #| "<literal>deb-src</literal> type references a Debian distribution's source " #| "code in the same form as the <literal>deb</literal> type. A <literal>deb-" #| "src</literal> line is required to fetch source indexes." @@ -7635,8 +7584,8 @@ msgid "" "archive, <filename>distribution/component</filename>. The " "<literal>distribution</literal> is generally a suite name like " "<literal>stable</literal> or <literal>testing</literal> or a codename like " -"<literal>&stable-codename;</literal> or <literal>&testing-codename;</" -"literal> while component is one of <literal>main</literal>, " +"<literal>&debian-stable-codename;</literal> or <literal>&debian-testing-" +"codename;</literal> while component is one of <literal>main</literal>, " "<literal>contrib</literal> or <literal>non-free</literal>. The <literal>deb-" "src</literal> type references a Debian distribution's source code in the " "same form as the <literal>deb</literal> type. A <literal>deb-src</literal> " @@ -7645,13 +7594,13 @@ msgstr "" "Der <literal>deb</literal>-Typ beschreibt ein typisches zweistufiges Debian-" "Archiv, <filename>Distribution/Komponente</filename>. <literal>Distribution</" "literal> ist typischerweise ein Archivname wie <literal>stable</literal> " -"oder <literal>testing</literal> oder ein Codename wie <literal>&stable-" -"codename;</literal> oder <literal>&testing-codename;</literal> während " -"Komponente entweder <literal>main</literal>, <literal>contrib</literal> oder " -"<literal>non-free</literal> ist. Der <literal>deb-src</literal>-Typ " -"beschreibt den Quellcode einer Debian-Distribution in der gleichen Form wie " -"den <literal>deb</literal>-Typ. Eine <literal>deb-src</literal>-Zeile wird " -"benötigt, um Quellindizes herunterzuladen." +"oder <literal>testing</literal> oder ein Codename wie <literal>&debian-" +"stable-codename;</literal> oder <literal>&debian-testing-codename;</literal> " +"während Komponente entweder <literal>main</literal>, <literal>contrib</" +"literal> oder <literal>non-free</literal> ist. Der <literal>deb-src</" +"literal>-Typ beschreibt den Quellcode einer Debian-Distribution in der " +"gleichen Form wie den <literal>deb</literal>-Typ. Eine <literal>deb-src</" +"literal>-Zeile wird benötigt, um Quellindizes herunterzuladen." #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml @@ -7908,9 +7857,10 @@ msgid "" "<option>Targets</option> (<option>target</option>) is a multivalue option " "defining which download targets apt will try to acquire from this source. If " "not specified, the default set is defined by the <option>Acquire::" -"IndexTargets</option> configuration scope. Additionally, specific targets " -"can be enabled or disabled by using the identifier as field name instead of " -"using this multivalue option." +"IndexTargets</option> configuration scope (targets are specified by their " +"name in the <literal>Created-By</literal> field). Additionally, targets can " +"be enabled or disabled by using the <literal>Identifier</literal> field as " +"an option with a boolean value instead of using this multivalue option." msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> @@ -7952,6 +7902,17 @@ msgid "" "detect and error out on such anomalies." msgstr "" +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: sources.list.5.xml +msgid "" +"<option>Allow-Insecure</option> (<option>allow-insecure</option>), " +"<option>Allow-Weak</option> (<option>allow-weak</option>) and <option>Allow-" +"Downgrade-To-Insecure</option> (<option>allow-downgrade-to-insecure</" +"option>) are boolean values which all default to <literal>no</literal>. If " +"set to <literal>yes</literal> they circumvent parts of &apt-secure; and " +"should therefore not be used lightly!" +msgstr "" + #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> #: sources.list.5.xml msgid "" @@ -7974,13 +7935,14 @@ msgid "" "<option>Signed-By</option> (<option>signed-by</option>) is either an " "absolute path to a keyring file (has to be accessible and readable for the " "<literal>_apt</literal> user, so ensure everyone has read-permissions on the " -"file) or a fingerprint of a key either in the <filename>trusted.gpg</" -"filename> keyring or in one of the keyrings in the <filename>trusted.gpg.d/</" +"file) or one or more fingerprints of keys either in the <filename>trusted." +"gpg</filename> keyring or in the keyrings in the <filename>trusted.gpg.d/</" "filename> directory (see <command>apt-key fingerprint</command>). If the " -"option is set, only the key(s) in this keyring or only the key with this " -"fingerprint is used for the &apt-secure; verification of this repository. " -"Otherwise all keys in the trusted keyrings are considered valid signers for " -"this repository." +"option is set, only the key(s) in this keyring or only the keys with these " +"fingerprints are used for the &apt-secure; verification of this repository. " +"Defaults to the value of the option with the same name if set in the " +"previously acquired <filename>Release</filename> file. Otherwise all keys " +"in the trusted keyrings are considered valid signers for this repository." msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> @@ -8235,35 +8197,35 @@ msgstr "" #: sources.list.5.xml #, fuzzy, no-wrap #| msgid "" -#| "deb http://ftp.debian.org/debian &stable-codename; main\n" -#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main" +#| "deb http://ftp.debian.org/debian &debian-stable-codename; main\n" +#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main" msgid "" -"deb http://httpredir.debian.org/debian &stable-codename; main\n" -"deb [ arch=amd64,armel ] http://httpredir.debian.org/debian &stable-codename; main" +"deb http://httpredir.debian.org/debian &debian-stable-codename; main\n" +"deb [ arch=amd64,armel ] http://httpredir.debian.org/debian &debian-stable-codename; main" msgstr "" -"deb http://ftp.debian.org/debian &stable-codename; main\n" -"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main" +"deb http://ftp.debian.org/debian &debian-stable-codename; main\n" +"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main" #. type: Content of: <refentry><refsect1><literallayout> #: sources.list.5.xml #, fuzzy, no-wrap #| msgid "" -#| "deb http://ftp.debian.org/debian &stable-codename; main\n" -#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main" +#| "deb http://ftp.debian.org/debian &debian-stable-codename; main\n" +#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main" msgid "" "Types: deb\n" "URIs: http://httpredir.debian.org/debian\n" -"Suites: &stable-codename;\n" +"Suites: &debian-stable-codename;\n" "Components: main\n" "\n" "Types: deb\n" "URIs: http://httpredir.debian.org/debian\n" -"Suites: &stable-codename;\n" +"Suites: &debian-stable-codename;\n" "Components: main\n" "Architectures: amd64 armel\n" msgstr "" -"deb http://ftp.debian.org/debian &stable-codename; main\n" -"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main" +"deb http://ftp.debian.org/debian &debian-stable-codename; main\n" +"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main" #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml @@ -8295,28 +8257,28 @@ msgstr "deb http://archive.debian.org/debian-archive hamm main" #: sources.list.5.xml msgid "" "Uses FTP to access the archive at ftp.debian.org, under the debian " -"directory, and uses only the &stable-codename;/contrib area." +"directory, and uses only the &debian-stable-codename;/contrib area." msgstr "" "benutzt FTP, um auf das Archiv auf archive.debian.org unter dem debian-" -"Verzeichnis zuzugreifen und nur den &stable-codename;/contrib-Bereich zu " -"benutzen." +"Verzeichnis zuzugreifen und nur den &debian-stable-codename;/contrib-Bereich " +"zu benutzen." #. type: Content of: <refentry><refsect1><literallayout> #: sources.list.5.xml #, no-wrap -msgid "deb ftp://ftp.debian.org/debian &stable-codename; contrib" -msgstr "deb ftp://ftp.debian.org/debian &stable-codename; contrib" +msgid "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib" +msgstr "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib" #. type: Content of: <refentry><refsect1><literallayout> #: sources.list.5.xml #, fuzzy, no-wrap -#| msgid "deb ftp://ftp.debian.org/debian &stable-codename; contrib" +#| msgid "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib" msgid "" "Types: deb\n" "URIs: ftp://ftp.debian.org/debian\n" -"Suites: &stable-codename;\n" +"Suites: &debian-stable-codename;\n" "Components: contrib" -msgstr "deb ftp://ftp.debian.org/debian &stable-codename; contrib" +msgstr "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib" #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml @@ -8426,9 +8388,9 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml #, fuzzy -#| msgid "&apt-cache; &apt-conf;" -msgid "&apt-get;, &apt-conf;" -msgstr "&apt-cache; &apt-conf;" +#| msgid "&apt-cache;, &apt-config;, &apt-preferences;." +msgid "&apt-get;, &apt-conf;, &apt-acquire-additional-files;" +msgstr "&apt-cache;, &apt-config;, &apt-preferences;." #. type: Content of: <refentry><refmeta><manvolnum> #: apt-extracttemplates.1.xml apt-sortpkgs.1.xml apt-ftparchive.1.xml @@ -8673,14 +8635,15 @@ msgstr "" msgid "" "The <literal>release</literal> command generates a Release file from a " "directory tree. It recursively searches the given directory for uncompressed " -"<filename>Packages</filename> and <filename>Sources</filename> files and " -"ones compressed with <command>gzip</command>, <command>bzip2</command> or " -"<command>lzma</command> as well as <filename>Release</filename> and " -"<filename>md5sum.txt</filename> files by default (<literal>APT::FTPArchive::" -"Release::Default-Patterns</literal>). Additional filename patterns can be " -"added by listing them in <literal>APT::FTPArchive::Release::Patterns</" -"literal>. It then writes to stdout a <filename>Release</filename> file " -"containing (by default) an MD5, SHA1, SHA256 and SHA512 digest for each file." +"and compressed <filename>Packages</filename>, <filename>Sources</filename>, " +"<filename>Contents</filename>, <filename>Components</filename> and " +"<filename>icons</filename> files as well as <filename>Release</filename>, " +"<filename>Index</filename> and <filename>md5sum.txt</filename> files by " +"default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). " +"Additional filename patterns can be added by listing them in <literal>APT::" +"FTPArchive::Release::Patterns</literal>. It then writes to stdout a " +"<filename>Release</filename> file containing (by default) an MD5, SHA1, " +"SHA256 and SHA512 digest for each file." msgstr "" "Der Befehl <literal>release</literal> erzeugt eine Release-Datei aus einem " "Verzeichnisbaum. Standardmäßig durchsucht er rekursiv das angegebene " @@ -8697,15 +8660,25 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml +#, fuzzy +#| msgid "" +#| "Values for the additional metadata fields in the Release file are taken " +#| "from the corresponding variables under <literal>APT::FTPArchive::Release</" +#| "literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The " +#| "supported fields are: <literal>Origin</literal>, <literal>Label</" +#| "literal>, <literal>Suite</literal>, <literal>Version</literal>, " +#| "<literal>Codename</literal>, <literal>Date</literal>, <literal>Valid-" +#| "Until</literal>, <literal>Architectures</literal>, <literal>Components</" +#| "literal>, <literal>Description</literal>." msgid "" "Values for the additional metadata fields in the Release file are taken from " "the corresponding variables under <literal>APT::FTPArchive::Release</" -"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The " -"supported fields are: <literal>Origin</literal>, <literal>Label</literal>, " +"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The " +"supported fields are <literal>Origin</literal>, <literal>Label</literal>, " "<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</" "literal>, <literal>Date</literal>, <literal>Valid-Until</literal>, " -"<literal>Architectures</literal>, <literal>Components</literal>, " -"<literal>Description</literal>." +"<literal>Signed-By</literal>, <literal>Architectures</literal>, " +"<literal>Components</literal> and <literal>Description</literal>." msgstr "" "Werte für zusätzliche Metadatenfelder in der Release-Datei werden den " "entsprechenden Variablen unter <literal>APT::FTPArchive::Release</literal> " @@ -8840,11 +8813,17 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml +#, fuzzy +#| msgid "" +#| "Sets the default compression schemes to use for the package index files. " +#| "It is a string that contains a space separated list of at least one of: " +#| "'.' (no compression), 'gzip' and 'bzip2'. The default for all compression " +#| "schemes is '. gzip'." msgid "" "Sets the default compression schemes to use for the package index files. It " -"is a string that contains a space separated list of at least one of: '.' (no " -"compression), 'gzip' and 'bzip2'. The default for all compression schemes is " -"'. gzip'." +"is a string that contains a space separated list of at least one of the " +"compressors configured via the <option>APT::Compressor</option> " +"configuration scope. The default for all compression schemes is '. gzip'." msgstr "" "setzt das Vorgabe-Kompressionsschema, das für die Package-Indexdateien " "benutzt wird. Es ist eine Zeichenkette, die eine durch Leerzeichen getrennte " @@ -9110,12 +9089,12 @@ msgid "" "The <literal>Tree</literal> section takes a scope tag which sets the " "<literal>$(DIST)</literal> variable and defines the root of the tree (the " "path is prefixed by <literal>ArchiveDir</literal>). Typically this is a " -"setting such as <filename>dists/&stable-codename;</filename>." +"setting such as <filename>dists/&debian-stable-codename;</filename>." msgstr "" "Der <literal>Tree</literal>-Abschnitt nimmt eine scope-Markierung, die die " "<literal>$(DIST)</literal>-Variable setzt und die Wurzel des Baumes " "definiert (der Pfad hat den Präfix von <literal>ArchiveDir</literal>). " -"Typischerweise ist dies eine Einstellung wie <filename>dists/&stable-" +"Typischerweise ist dies eine Einstellung wie <filename>dists/&debian-stable-" "codename;</filename>." #. type: Content of: <refentry><refsect1><refsect2><para> @@ -11180,6 +11159,204 @@ msgstr " # apt-get -o dir::cache::archives=\"/Platte/\" dist-upgrade\n" msgid "Which will use the already fetched archives on the disc." msgstr "Es wird die bereits auf die Platte heruntergeladenen Archive benutzen." +#~ msgid "dpkg trigger usage (and related options)" +#~ msgstr "Dpkd-Trigger-Benutzung (und zugehörige Optionen)" + +#~ msgid "" +#~ "APT can call &dpkg; in such a way as to let it make aggressive use of " +#~ "triggers over multiple calls of &dpkg;. Without further options &dpkg; " +#~ "will use triggers once each time it runs. Activating these options can " +#~ "therefore decrease the time needed to perform the install or upgrade. " +#~ "Note that it is intended to activate these options per default in the " +#~ "future, but as it drastically changes the way APT calls &dpkg; it needs a " +#~ "lot more testing. <emphasis>These options are therefore currently " +#~ "experimental and should not be used in production environments.</" +#~ "emphasis> It also breaks progress reporting such that all front-ends will " +#~ "currently stay around half (or more) of the time in the 100% state while " +#~ "it actually configures all packages." +#~ msgstr "" +#~ "APT kann &dpkg; auf eine Art aufrufen, in der aggressiv Gebrauch von " +#~ "Triggern über mehrere &dpkg;-Aufrufe hinweg gemacht wird. Ohne weitere " +#~ "Optionen wird &dpkg; Trigger nur einmal bei jeder Ausführung benutzen. " +#~ "Diese Optionen zu aktivieren, kann daher die zum Installieren oder " +#~ "Upgrade benötigte Zeit verkürzen. Beachten Sie, dass geplant ist, diese " +#~ "Optionen in Zukunft standardmäßig zu aktivieren, aber da es die Art, wie " +#~ "APT &dpkg; aufruft, drastisch ändert, benötigt es noch viele weitere " +#~ "Tests. <emphasis>Diese Optionen sind daher aktuell noch experimentell und " +#~ "sollten nicht in produktiven Umgebungen benutzt werden.</emphasis> " +#~ "Außerdem unterbricht es die Fortschrittsanzeige, so dass alle Oberflächen " +#~ "derzeit die halbe (oder mehr) Zeit auf dem Status 100% stehen, während " +#~ "tatsächlich alle Pakete konfiguriert werden." + +#~ msgid "" +#~ "DPkg::NoTriggers \"true\";\n" +#~ "PackageManager::Configure \"smart\";\n" +#~ "DPkg::ConfigurePending \"true\";\n" +#~ "DPkg::TriggersPending \"true\";" +#~ msgstr "" +#~ "DPkg::NoTriggers \"true\";\n" +#~ "PackageManager::Configure \"smart\";\n" +#~ "DPkg::ConfigurePending \"true\";\n" +#~ "DPkg::TriggersPending \"true\";" + +#~ msgid "" +#~ "Note that it is not guaranteed that APT will support these options or " +#~ "that these options will not cause (big) trouble in the future. If you " +#~ "have understand the current risks and problems with these options, but " +#~ "are brave enough to help testing them, create a new configuration file " +#~ "and test a combination of options. Please report any bugs, problems and " +#~ "improvements you encounter and make sure to note which options you have " +#~ "used in your reports. Asking &dpkg; for help could also be useful for " +#~ "debugging proposes, see e.g. <command>dpkg --audit</command>. A defensive " +#~ "option combination would be <placeholder type=\"literallayout\" id=\"0\"/>" +#~ msgstr "" +#~ "Beachten Sie, dass es nicht gewährleistet ist, dass APT diese Optionen " +#~ "unterstützen wird oder dass diese Optionen in der Zukunft keinen (großen) " +#~ "Ärger machen. Wenn Sie die allgemeinen Risiken und Probleme mit diesen " +#~ "Optionen verstanden haben, aber tapfer genug sind, sie testen zu helfen, " +#~ "erstellen Sie eine neue Konfigurationsdatei und testen Sie eine " +#~ "Kombination von Optionen. Bitte berichten Sie auf Englisch jegliche " +#~ "Fehler, Probleme und Verbesserungen, denen Sie begegnen und stellen Sie " +#~ "sicher, dass Sie alle von Ihnen benutzten Optionen in Ihren Berichten " +#~ "vermerken. Zum Zweck der Fehlersuche könnte es außerdem nützlich sein, " +#~ "&dpkg; um Hilfe zu fragen. Lesen Sie z.B. <command>dpkg --audit</" +#~ "command>. Eine defensive Optionenkombination wäre <placeholder type=" +#~ "\"literallayout\" id=\"0\"/>" + +#~ msgid "" +#~ "Add the no triggers flag to all &dpkg; calls (except the ConfigurePending " +#~ "call). See &dpkg; if you are interested in what this actually means. In " +#~ "short: &dpkg; will not run the triggers when this flag is present unless " +#~ "it is explicitly called to do so in an extra call. Note that this option " +#~ "exists (undocumented) also in older APT versions with a slightly " +#~ "different meaning: Previously these option only append --no-triggers to " +#~ "the configure calls to &dpkg; - now APT will also add this flag to the " +#~ "unpack and remove calls." +#~ msgstr "" +#~ "fügt die keine-Trigger-Markierung zu allen &dpkg; Aufrufen hinzu " +#~ "(ausgenommen den ConfigurePending-Aufruf). Siehe &dpkg;, wenn Sie " +#~ "interessiert sind, was dies tatsächlich bedeutet. In Kürze: &dpkg; wird " +#~ "die Trigger nicht ausführen, dann ist diese Markierung vorhanden, außer " +#~ "sie wird explizit aufgerufen, um dies in einem gesonderten Aufruf zu tun. " +#~ "Beachten Sie, dass diese Option außerdem in älteren APT-Versionen mit " +#~ "einer geringfügig anderen Bedeutung existiert (nicht dokumentiert): " +#~ "Vorher hing diese Option nur --no-triggers an die Konfigurationsaufrufe " +#~ "für &dpkg; an – nun wird APT diese Markierung außerdem an die »unpack«- " +#~ "und »remove«-Aufrufe anhängen." + +#~ msgid "" +#~ "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " +#~ "and \"<literal>no</literal>\". The default value is \"<literal>all</" +#~ "literal>\", which causes APT to configure all packages. The " +#~ "\"<literal>smart</literal>\" way is to configure only packages which need " +#~ "to be configured before another package can be unpacked (Pre-Depends), " +#~ "and let the rest be configured by &dpkg; with a call generated by the " +#~ "ConfigurePending option (see below). On the other hand, \"<literal>no</" +#~ "literal>\" will not configure anything, and totally relies on &dpkg; for " +#~ "configuration (which at the moment will fail if a Pre-Depends is " +#~ "encountered). Setting this option to any value other than <literal>all</" +#~ "literal> will implicitly also activate the next option by default, as " +#~ "otherwise the system could end in an unconfigured and potentially " +#~ "unbootable state." +#~ msgstr "" +#~ "Gültige Werte sind »<literal>all</literal>«, »<literal>smart</literal>« " +#~ "und »<literal>no</literal>«. Der Standardwert ist »<literal>all</" +#~ "literal>«, was APT veranlasst, alle Pakete zu konfigurieren. Die Art von " +#~ "»<literal>smart</literal>« ist es, nur die Pakete zu konfigurieren, die " +#~ "konfiguriert werden müssen, bevor ein anderes Paket entpackt werden kann " +#~ "(Pre-Depends), und den Rest von &dpkg; mit einem Aufruf, der durch die " +#~ "Option ConfigurePending (siehe unten) generiert wurde, konfigurieren zu " +#~ "lassen. Im Gegensatz dazu wird »<literal>no</literal>« nichts " +#~ "konfigurieren und sich völlig auf die Konfiguration durch &dpkg; " +#~ "verlassen (was im Moment fehlschlägt, falls ein Pre-Depends vorkommt). " +#~ "Diese Option auf etwas anderes als <literal>all</literal> zu setzen, wird " +#~ "außerdem implizit standardmäßig die nächste Option aktivieren, da das " +#~ "System anderenfalls in einem nicht konfigurierten Status enden könnte und " +#~ "möglicherweise nicht mehr startbar ist." + +#~ msgid "" +#~ "Useful for the <literal>smart</literal> configuration as a package which " +#~ "has pending triggers is not considered as <literal>installed</literal>, " +#~ "and &dpkg; treats them as <literal>unpacked</literal> currently which is " +#~ "a showstopper for Pre-Dependencies (see debbugs #526774). Note that this " +#~ "will process all triggers, not only the triggers needed to configure this " +#~ "package." +#~ msgstr "" +#~ "nützlich für <literal>smart</literal>-Konfiguration, da ein Paket mit " +#~ "ausstehenden Triggern nicht als <literal>installed</literal> angesehen " +#~ "wird und Dpkg es als aktuell entpackt betrachtet, was ein Hemmschuh für " +#~ "Pre-Dependencies ist (siehe Debian-Fehler #526774). Beachten Sie, dass " +#~ "dies alle Trigger ausführt, nicht nur die Trigger, die zum Konfigurieren " +#~ "dieses Pakets benötigt werden." + +#~ msgid "" +#~ "OrderList::Score {\n" +#~ "\tDelete 500;\n" +#~ "\tEssential 200;\n" +#~ "\tImmediate 10;\n" +#~ "\tPreDepends 50;\n" +#~ "};" +#~ msgstr "" +#~ "OrderList::Score {\n" +#~ "\tDelete 500;\n" +#~ "\tEssential 200;\n" +#~ "\tImmediate 10;\n" +#~ "\tPreDepends 50;\n" +#~ "};" + +#~ msgid "" +#~ "Essential packages (and their dependencies) should be configured " +#~ "immediately after unpacking. It is a good idea to do this quite early in " +#~ "the upgrade process as these configure calls also currently require " +#~ "<literal>DPkg::TriggersPending</literal> which will run quite a few " +#~ "triggers (which may not be needed). Essentials get per default a high " +#~ "score but the immediate flag is relatively low (a package which has a Pre-" +#~ "Depends is rated higher). These option and the others in the same group " +#~ "can be used to change the scoring. The following example shows the " +#~ "settings with their default values. <placeholder type=\"literallayout\" " +#~ "id=\"0\"/>" +#~ msgstr "" +#~ "Essentielle Pakete (und ihre Abhängigkeiten) sollten sofort nach dem " +#~ "Entpacken konfiguriert werden. Es ist eine gute Idee, dies ziemlich früh " +#~ "im Upgrade-Prozess zu tun, da diese Konfigurationsaufrufe aktuell " +#~ "außerdem <literal>DPkg::TriggersPending</literal> benötigen, das eine " +#~ "Reihe von Triggern ausführt (die möglicherweise nicht gebraucht werden). " +#~ "Essentielle Pakete haben als Vorgabe eine hohe Bewertung, aber die " +#~ "Unmittelbarmarkierung ist relativ niedrig (ein Paket, das Pre-Depends " +#~ "hat, wird höher bewertet). Diese Option und die anderen in der gleichen " +#~ "Gruppe können benutzt werden, um die Bewertung zu ändern. Das folgende " +#~ "Beispiel zeigt die Einstellungen mit ihren Vorgabewerten. <placeholder " +#~ "type=\"literallayout\" id=\"0\"/>" + +#~ msgid "List fingerprints of trusted keys." +#~ msgstr "listet Fingerabdrücke vertrauenswürdiger Schlüssel auf." + +#~ msgid "<filename>/etc/apt/trustdb.gpg</filename>" +#~ msgstr "<filename>/etc/apt/trustdb.gpg</filename>" + +#~ msgid "Local trust database of archive keys." +#~ msgstr "lokale Datenbank vertrauenswürdiger Archivschlüssel" + +#~ msgid "&keyring-filename;" +#~ msgstr "&keyring-filename;" + +#~ msgid "Keyring of &keyring-distro; archive trusted keys." +#~ msgstr "" +#~ "Schlüsselbund vertrauenswürdiger Schlüssel des &keyring-distro;-Archivs" + +#~ msgid "&keyring-removed-filename;" +#~ msgstr "&keyring-removed-filename;" + +#~ msgid "Keyring of &keyring-distro; archive removed trusted keys." +#~ msgstr "" +#~ "Schlüsselbund entfernter vertrauenswürdiger Schlüssel des &keyring-" +#~ "distro;-Archivs" + +#, fuzzy +#~| msgid "&apt-cache; &apt-conf;" +#~ msgid "&apt-get;, &apt-conf;" +#~ msgstr "&apt-cache; &apt-conf;" + #~ msgid "" #~ "This is a space separated list of all the architectures that appear under " #~ "search section. The special architecture 'source' is used to indicate " @@ -11470,12 +11647,14 @@ msgstr "Es wird die bereits auf die Platte heruntergeladenen Archive benutzen." #~ msgstr "Einige Beispiele:" #~ msgid "" -#~ "deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n" -#~ "deb http://security.debian.org/ &stable-codename;/updates main contrib " +#~ "deb http://ftp.debian.org/debian &debian-stable-codename; main contrib " #~ "non-free\n" +#~ "deb http://security.debian.org/ &debian-stable-codename;/updates main " +#~ "contrib non-free\n" #~ " " #~ msgstr "" -#~ "deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n" -#~ "deb http://security.debian.org/ &stable-codename;/updates main contrib " +#~ "deb http://ftp.debian.org/debian &debian-stable-codename; main contrib " #~ "non-free\n" +#~ "deb http://security.debian.org/ &debian-stable-codename;/updates main " +#~ "contrib non-free\n" #~ " "