X-Git-Url: https://git.saurik.com/apt.git/blobdiff_plain/2dd2c801ba4bbd2c57bc0f6fe590e11c16f46822..655122418d714f342b5d9789f45f8035f3fe8b9a:/apt-pkg/packagemanager.cc diff --git a/apt-pkg/packagemanager.cc b/apt-pkg/packagemanager.cc index 5ba1225a0..0be76b311 100644 --- a/apt-pkg/packagemanager.cc +++ b/apt-pkg/packagemanager.cc @@ -25,9 +25,9 @@ #include #include -#include #include -#include + +#include /*}}}*/ using namespace std; @@ -215,7 +215,7 @@ bool pkgPackageManager::CreateOrderList() return true; } /*}}}*/ -// PM::DepAlwaysTrue - Returns true if this dep is irrelevent /*{{{*/ +// PM::DepAlwaysTrue - Returns true if this dep is irrelevant /*{{{*/ // --------------------------------------------------------------------- /* The restriction on provides is to eliminate the case when provides are transitioning between valid states [ie exim to smail] */ @@ -243,11 +243,11 @@ bool pkgPackageManager::CheckRConflicts(PkgIterator Pkg,DepIterator D, D->Type != pkgCache::Dep::Obsoletes) continue; - // The package hasnt been changed + // The package hasn't been changed if (List->IsNow(Pkg) == false) continue; - // Ignore self conflicts, ignore conflicts from irrelevent versions + // Ignore self conflicts, ignore conflicts from irrelevant versions if (D.IsIgnorable(Pkg) || D.ParentVer() != D.ParentPkg().CurrentVer()) continue; @@ -314,7 +314,7 @@ bool pkgPackageManager::ConfigureAll() Note on failure: This method can fail, without causing any problems. This can happen when using Immediate-Configure-All, SmartUnPack may call - SmartConfigure, it may fail because of a complex dependancy situation, but + SmartConfigure, it may fail because of a complex dependency situation, but a error will only be reported if ConfigureAll fails. This is why some of the messages this function reports on failure (return false;) as just warnings only shown when debuging*/ @@ -337,7 +337,11 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) however if there is a loop (A depends on B, B depends on A) this will not be the case, so check for dependencies before configuring. */ bool Bad = false, Changed = false; - do { + const unsigned int max_loops = _config->FindI("APT::pkgPackageManager::MaxLoopCount", 5000); + unsigned int i=0; + std::list needConfigure; + do + { Changed = false; for (DepIterator D = instVer.DependsList(); D.end() == false; ) { @@ -349,7 +353,7 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) continue; Bad = true; - // Search for dependencies which are unpacked but aren't configured yet (maybe loops) + // Check for dependencies that have not been unpacked, probably due to loops. for (DepIterator Cur = Start; true; ++Cur) { SPtrArray VList = Cur.AllTargets(); @@ -369,51 +373,66 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) } // Check if the version that is going to be installed will satisfy the dependency - if (Cache[DepPkg].InstallVer != *I) + if (Cache[DepPkg].InstallVer != *I || List->IsNow(DepPkg) == false) continue; - if (List->IsFlag(DepPkg,pkgOrderList::UnPacked)) + if (PkgLoop == true) { - if (List->IsFlag(DepPkg,pkgOrderList::Loop) && PkgLoop) - { - // This dependency has already been dealt with by another SmartConfigure on Pkg - Bad = false; - break; - } - /* Check for a loop to prevent one forming - If A depends on B and B depends on A, SmartConfigure will - just hop between them if this is not checked. Dont remove the - loop flag after finishing however as loop is already set. - This means that there is another SmartConfigure call for this - package and it will remove the loop flag */ + if (Debug) + std::clog << OutputInDepth(Depth) << "Package " << Pkg << " loops in SmartConfigure" << std::endl; + Bad = false; + break; + } + else + { + if (Debug) + clog << OutputInDepth(Depth) << "Unpacking " << DepPkg.FullName() << " to avoid loop " << Cur << endl; if (PkgLoop == false) List->Flag(Pkg,pkgOrderList::Loop); - if (SmartConfigure(DepPkg, Depth + 1) == true) + if (SmartUnPack(DepPkg, true, Depth + 1) == true) { Bad = false; if (List->IsFlag(DepPkg,pkgOrderList::Loop) == false) - Changed = true; + Changed = true; } if (PkgLoop == false) - List->RmFlag(Pkg,pkgOrderList::Loop); - // If SmartConfigure was succesfull, Bad is false, so break + List->RmFlag(Pkg,pkgOrderList::Loop); if (Bad == false) break; } - else if (List->IsFlag(DepPkg,pkgOrderList::Configured)) - { - Bad = false; - break; - } } - if (Cur == End) + + if (Cur == End || Bad == false) break; - } + } if (Bad == false) continue; - // Check for dependencies that have not been unpacked, probably due to loops. + needConfigure.push_back(Start); + } + if (i++ > max_loops) + return _error->Error("Internal error: MaxLoopCount reached in SmartUnPack (1) for %s, aborting", Pkg.FullName().c_str()); + } while (Changed == true); + + Bad = false, Changed = false, i = 0; + do + { + Changed = false; + for (std::list::const_iterator D = needConfigure.begin(); D != needConfigure.end(); ++D) + { + // Compute a single dependency element (glob or) without modifying D + pkgCache::DepIterator Start, End; + { + pkgCache::DepIterator Discard = *D; + Discard.GlobOr(Start,End); + } + + if (End->Type != pkgCache::Dep::Depends) + continue; + Bad = true; + + // Search for dependencies which are unpacked but aren't configured yet (maybe loops) for (DepIterator Cur = Start; true; ++Cur) { SPtrArray VList = Cur.AllTargets(); @@ -424,42 +443,53 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) PkgIterator DepPkg = Ver.ParentPkg(); // Check if the version that is going to be installed will satisfy the dependency - if (Cache[DepPkg].InstallVer != *I || List->IsNow(DepPkg) == false) + if (Cache[DepPkg].InstallVer != *I) continue; - if (PkgLoop == true) - { - if (Debug) - std::clog << OutputInDepth(Depth) << "Package " << Pkg << " loops in SmartConfigure" << std::endl; - Bad = false; - break; - } - else + if (List->IsFlag(DepPkg,pkgOrderList::UnPacked)) { - if (Debug) - cout << OutputInDepth(Depth) << "Unpacking " << DepPkg.FullName() << " to avoid loop " << Cur << endl; + if (List->IsFlag(DepPkg,pkgOrderList::Loop) && PkgLoop) + { + // This dependency has already been dealt with by another SmartConfigure on Pkg + Bad = false; + break; + } + /* Check for a loop to prevent one forming + If A depends on B and B depends on A, SmartConfigure will + just hop between them if this is not checked. Dont remove the + loop flag after finishing however as loop is already set. + This means that there is another SmartConfigure call for this + package and it will remove the loop flag */ if (PkgLoop == false) List->Flag(Pkg,pkgOrderList::Loop); - if (SmartUnPack(DepPkg, true, Depth + 1) == true) + if (SmartConfigure(DepPkg, Depth + 1) == true) { Bad = false; if (List->IsFlag(DepPkg,pkgOrderList::Loop) == false) - Changed = true; + Changed = true; } if (PkgLoop == false) - List->RmFlag(Pkg,pkgOrderList::Loop); + List->RmFlag(Pkg,pkgOrderList::Loop); + // If SmartConfigure was succesfull, Bad is false, so break if (Bad == false) break; } + else if (List->IsFlag(DepPkg,pkgOrderList::Configured)) + { + Bad = false; + break; + } } - - if (Cur == End) + if (Cur == End || Bad == false) break; - } + } + if (Bad == true && Changed == false && Debug == true) - std::clog << OutputInDepth(Depth) << "Could not satisfy " << Start << std::endl; + std::clog << OutputInDepth(Depth) << "Could not satisfy " << *D << std::endl; } + if (i++ > max_loops) + return _error->Error("Internal error: MaxLoopCount reached in SmartUnPack (2) for %s, aborting", Pkg.FullName().c_str()); } while (Changed == true); if (Bad) { @@ -486,6 +516,7 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) P.end() == false; P = Pkg.Group().NextPkg(P)) { if (Pkg == P || List->IsFlag(P,pkgOrderList::Configured) == true || + List->IsFlag(P,pkgOrderList::UnPacked) == false || Cache[P].InstallVer == 0 || (P.CurrentVer() == Cache[P].InstallVer && (Cache[Pkg].iFlags & pkgDepCache::ReInstall) != pkgDepCache::ReInstall)) continue; @@ -565,7 +596,7 @@ bool pkgPackageManager::SmartRemove(PkgIterator Pkg) /*}}}*/ // PM::SmartUnPack - Install helper /*{{{*/ // --------------------------------------------------------------------- -/* This puts the system in a state where it can Unpack Pkg, if Pkg is allready +/* This puts the system in a state where it can Unpack Pkg, if Pkg is already unpacked, or when it has been unpacked, if Immediate==true it configures it. */ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg) { @@ -579,218 +610,255 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate, int c clog << OutputInDepth(Depth) << "SmartUnPack " << Pkg.FullName(); VerIterator InstallVer = VerIterator(Cache,Cache[Pkg].InstallVer); if (Pkg.CurrentVer() == 0) - cout << " (install version " << InstallVer.VerStr() << ")"; + clog << " (install version " << InstallVer.VerStr() << ")"; else - cout << " (replace version " << Pkg.CurrentVer().VerStr() << " with " << InstallVer.VerStr() << ")"; + clog << " (replace version " << Pkg.CurrentVer().VerStr() << " with " << InstallVer.VerStr() << ")"; if (PkgLoop) - cout << " (Only Perform PreUnpack Checks)"; - cout << endl; + clog << " (Only Perform PreUnpack Checks)"; + clog << endl; } VerIterator const instVer = Cache[Pkg].InstVerIter(Cache); /* PreUnpack Checks: This loop checks and attempts to rectify and problems that would prevent the package being unpacked. - It addresses: PreDepends, Conflicts, Obsoletes and Breaks (DpkgBreaks). Any resolutions that do not require it should + It addresses: PreDepends, Conflicts, Obsoletes and Breaks (DpkgBreaks). Any resolutions that do not require it should avoid configuration (calling SmartUnpack with Immediate=true), this is because when unpacking some packages with - complex dependancy structures, trying to configure some packages while breaking the loops can complicate things . - This will be either dealt with if the package is configured as a dependency of Pkg (if and when Pkg is configured), + complex dependency structures, trying to configure some packages while breaking the loops can complicate things . + This will be either dealt with if the package is configured as a dependency of Pkg (if and when Pkg is configured), or by the ConfigureAll call at the end of the for loop in OrderInstall. */ - for (DepIterator D = instVer.DependsList(); - D.end() == false; ) + bool Changed = false; + const unsigned int max_loops = _config->FindI("APT::pkgPackageManager::MaxLoopCount", 5000); + unsigned int i = 0; + do { - // Compute a single dependency element (glob or) - pkgCache::DepIterator Start; - pkgCache::DepIterator End; - D.GlobOr(Start,End); - - while (End->Type == pkgCache::Dep::PreDepends) + Changed = false; + for (DepIterator D = instVer.DependsList(); D.end() == false; ) { - if (Debug) - clog << OutputInDepth(Depth) << "PreDepends order for " << Pkg.FullName() << std::endl; + // Compute a single dependency element (glob or) + pkgCache::DepIterator Start, End; + D.GlobOr(Start,End); - // Look for possible ok targets. - SPtrArray VList = Start.AllTargets(); - bool Bad = true; - for (Version **I = VList; *I != 0 && Bad == true; I++) - { - VerIterator Ver(Cache,*I); - PkgIterator Pkg = Ver.ParentPkg(); - - // See if the current version is ok - if (Pkg.CurrentVer() == Ver && List->IsNow(Pkg) == true && - Pkg.State() == PkgIterator::NeedsNothing) + if (End->Type == pkgCache::Dep::PreDepends) + { + bool Bad = true; + if (Debug) + clog << OutputInDepth(Depth) << "PreDepends order for " << Pkg.FullName() << std::endl; + + // Look for easy targets: packages that are already okay + for (DepIterator Cur = Start; Bad == true; ++Cur) { - Bad = false; - if (Debug) - clog << OutputInDepth(Depth) << "Found ok package " << Pkg.FullName() << endl; - continue; - } - } - - // Look for something that could be configured. - for (Version **I = VList; *I != 0 && Bad == true; I++) - { - VerIterator Ver(Cache,*I); - PkgIterator Pkg = Ver.ParentPkg(); - - // Not the install version - if (Cache[Pkg].InstallVer != *I || - (Cache[Pkg].Keep() == true && Pkg.State() == PkgIterator::NeedsNothing)) - continue; - - if (List->IsFlag(Pkg,pkgOrderList::Configured)) { - Bad = false; - continue; + SPtrArray VList = Cur.AllTargets(); + for (Version **I = VList; *I != 0; ++I) + { + VerIterator Ver(Cache,*I); + PkgIterator Pkg = Ver.ParentPkg(); + + // See if the current version is ok + if (Pkg.CurrentVer() == Ver && List->IsNow(Pkg) == true && + Pkg.State() == PkgIterator::NeedsNothing) + { + Bad = false; + if (Debug) + clog << OutputInDepth(Depth) << "Found ok package " << Pkg.FullName() << endl; + break; + } + } + if (Cur == End) + break; } - // check if it needs unpack or if if configure is enough - if (!List->IsFlag(Pkg,pkgOrderList::UnPacked)) - { - if (Debug) - clog << OutputInDepth(Depth) << "Trying to SmartUnpack " << Pkg.FullName() << endl; - // SmartUnpack with the ImmediateFlag to ensure its really ready - Bad = !SmartUnPack(Pkg, true, Depth + 1); - } else { - if (Debug) - clog << OutputInDepth(Depth) << "Trying to SmartConfigure " << Pkg.FullName() << endl; - Bad = !SmartConfigure(Pkg, Depth + 1); - } - } + // Look for something that could be configured. + for (DepIterator Cur = Start; Bad == true && Cur.end() == false; ++Cur) + { + SPtrArray VList = Cur.AllTargets(); + for (Version **I = VList; *I != 0; ++I) + { + VerIterator Ver(Cache,*I); + PkgIterator Pkg = Ver.ParentPkg(); - /* If this or element did not match then continue on to the - next or element until a matching element is found */ - if (Bad == true) - { - // This triggers if someone make a pre-depends/depend loop. - if (Start == End) - return _error->Error("Couldn't configure pre-depend %s for %s, " - "probably a dependency cycle.", - End.TargetPkg().FullName().c_str(),Pkg.FullName().c_str()); - ++Start; - } - else - break; - } - - if (End->Type == pkgCache::Dep::Conflicts || - End->Type == pkgCache::Dep::Obsoletes) - { - /* Look for conflicts. Two packages that are both in the install - state cannot conflict so we don't check.. */ - SPtrArray VList = End.AllTargets(); - for (Version **I = VList; *I != 0; I++) - { - VerIterator Ver(Cache,*I); - PkgIterator ConflictPkg = Ver.ParentPkg(); - VerIterator InstallVer(Cache,Cache[ConflictPkg].InstallVer); - - // See if the current version is conflicting - if (ConflictPkg.CurrentVer() == Ver && List->IsNow(ConflictPkg)) - { - cout << OutputInDepth(Depth) << Pkg.FullName() << " conflicts with " << ConflictPkg.FullName() << endl; - /* If a loop is not present or has not yet been detected, attempt to unpack packages - to resolve this conflict. If there is a loop present, remove packages to resolve this conflict */ - if (!List->IsFlag(ConflictPkg,pkgOrderList::Loop)) { - if (Cache[ConflictPkg].Keep() == 0 && Cache[ConflictPkg].InstallVer != 0) { - if (Debug) - cout << OutputInDepth(Depth) << OutputInDepth(Depth) << "Unpacking " << ConflictPkg.FullName() << " to prevent conflict" << endl; - List->Flag(Pkg,pkgOrderList::Loop); - SmartUnPack(ConflictPkg,false, Depth + 1); - // Remove loop to allow it to be used later if needed - List->RmFlag(Pkg,pkgOrderList::Loop); - } else { - if (EarlyRemove(ConflictPkg) == false) - return _error->Error("Internal Error, Could not early remove %s",ConflictPkg.FullName().c_str()); - } - } else { - if (!List->IsFlag(ConflictPkg,pkgOrderList::Removed)) { - if (Debug) - cout << OutputInDepth(Depth) << "Because of conficts knot, removing " << ConflictPkg.FullName() << " to conflict violation" << endl; - if (EarlyRemove(ConflictPkg) == false) - return _error->Error("Internal Error, Could not early remove %s",ConflictPkg.FullName().c_str()); - } + // Not the install version + if (Cache[Pkg].InstallVer != *I || + (Cache[Pkg].Keep() == true && Pkg.State() == PkgIterator::NeedsNothing)) + continue; + + if (List->IsFlag(Pkg,pkgOrderList::Configured)) + { + Bad = false; + break; + } + + // check if it needs unpack or if if configure is enough + if (List->IsFlag(Pkg,pkgOrderList::UnPacked) == false) + { + if (Debug) + clog << OutputInDepth(Depth) << "Trying to SmartUnpack " << Pkg.FullName() << endl; + // SmartUnpack with the ImmediateFlag to ensure its really ready + if (SmartUnPack(Pkg, true, Depth + 1) == true) + { + Bad = false; + if (List->IsFlag(Pkg,pkgOrderList::Loop) == false) + Changed = true; + break; + } + } + else + { + if (Debug) + clog << OutputInDepth(Depth) << "Trying to SmartConfigure " << Pkg.FullName() << endl; + if (SmartConfigure(Pkg, Depth + 1) == true) + { + Bad = false; + if (List->IsFlag(Pkg,pkgOrderList::Loop) == false) + Changed = true; + break; + } + } } } + + if (Bad == true) + { + if (Start == End) + return _error->Error("Couldn't configure pre-depend %s for %s, " + "probably a dependency cycle.", + End.TargetPkg().FullName().c_str(),Pkg.FullName().c_str()); + } + else + continue; } - } - - // Check for breaks - if (End->Type == pkgCache::Dep::DpkgBreaks) { - SPtrArray VList = End.AllTargets(); - for (Version **I = VList; *I != 0; I++) + else if (End->Type == pkgCache::Dep::Conflicts || + End->Type == pkgCache::Dep::Obsoletes) { - VerIterator Ver(Cache,*I); - PkgIterator BrokenPkg = Ver.ParentPkg(); - if (BrokenPkg.CurrentVer() != Ver) + /* Look for conflicts. Two packages that are both in the install + state cannot conflict so we don't check.. */ + SPtrArray VList = End.AllTargets(); + for (Version **I = VList; *I != 0; I++) { - if (Debug) - std::clog << OutputInDepth(Depth) << " Ignore not-installed version " << Ver.VerStr() << " of " << Pkg.FullName() << " for " << End << std::endl; - continue; - } + VerIterator Ver(Cache,*I); + PkgIterator ConflictPkg = Ver.ParentPkg(); + VerIterator InstallVer(Cache,Cache[ConflictPkg].InstallVer); - // Check if it needs to be unpacked - if (List->IsFlag(BrokenPkg,pkgOrderList::InList) && Cache[BrokenPkg].Delete() == false && - List->IsNow(BrokenPkg)) { - if (List->IsFlag(BrokenPkg,pkgOrderList::Loop) && PkgLoop) { - // This dependancy has already been dealt with by another SmartUnPack on Pkg - break; - } else { - // Found a break, so see if we can unpack the package to avoid it - // but do not set loop if another SmartUnPack already deals with it - VerIterator InstallVer(Cache,Cache[BrokenPkg].InstallVer); - bool circle = false; - for (pkgCache::DepIterator D = InstallVer.DependsList(); D.end() == false; ++D) + // See if the current version is conflicting + if (ConflictPkg.CurrentVer() == Ver && List->IsNow(ConflictPkg)) + { + if (Debug) + clog << OutputInDepth(Depth) << Pkg.FullName() << " conflicts with " << ConflictPkg.FullName() << endl; + /* If a loop is not present or has not yet been detected, attempt to unpack packages + to resolve this conflict. If there is a loop present, remove packages to resolve this conflict */ + if (List->IsFlag(ConflictPkg,pkgOrderList::Loop) == false) { - if (D->Type != pkgCache::Dep::PreDepends) - continue; - SPtrArray VL = D.AllTargets(); - for (Version **I = VL; *I != 0; ++I) + if (Cache[ConflictPkg].Keep() == 0 && Cache[ConflictPkg].InstallVer != 0) { - VerIterator V(Cache,*I); - PkgIterator P = V.ParentPkg(); - // we are checking for installation as an easy 'protection' against or-groups and (unchosen) providers - if (P->CurrentVer == 0 || P != Pkg || (P.CurrentVer() != V && Cache[P].InstallVer != V)) - continue; - circle = true; - break; + if (Debug) + clog << OutputInDepth(Depth) << OutputInDepth(Depth) << "Unpacking " << ConflictPkg.FullName() << " to prevent conflict" << endl; + List->Flag(Pkg,pkgOrderList::Loop); + if (SmartUnPack(ConflictPkg,false, Depth + 1) == true) + if (List->IsFlag(ConflictPkg,pkgOrderList::Loop) == false) + Changed = true; + // Remove loop to allow it to be used later if needed + List->RmFlag(Pkg,pkgOrderList::Loop); } - if (circle == true) - break; + else if (EarlyRemove(ConflictPkg) == false) + return _error->Error("Internal Error, Could not early remove %s (1)",ConflictPkg.FullName().c_str()); } - if (circle == true) + else if (List->IsFlag(ConflictPkg,pkgOrderList::Removed) == false) { if (Debug) - cout << OutputInDepth(Depth) << " Avoiding " << End << " avoided as " << BrokenPkg.FullName() << " has a pre-depends on " << Pkg.FullName() << std::endl; - continue; + clog << OutputInDepth(Depth) << "Because of conficts knot, removing " << ConflictPkg.FullName() << " to conflict violation" << endl; + if (EarlyRemove(ConflictPkg) == false) + return _error->Error("Internal Error, Could not early remove %s (2)",ConflictPkg.FullName().c_str()); + } + } + } + } + else if (End->Type == pkgCache::Dep::DpkgBreaks) + { + SPtrArray VList = End.AllTargets(); + for (Version **I = VList; *I != 0; ++I) + { + VerIterator Ver(Cache,*I); + PkgIterator BrokenPkg = Ver.ParentPkg(); + if (BrokenPkg.CurrentVer() != Ver) + { + if (Debug) + std::clog << OutputInDepth(Depth) << " Ignore not-installed version " << Ver.VerStr() << " of " << Pkg.FullName() << " for " << End << std::endl; + continue; + } + + // Check if it needs to be unpacked + if (List->IsFlag(BrokenPkg,pkgOrderList::InList) && Cache[BrokenPkg].Delete() == false && + List->IsNow(BrokenPkg)) + { + if (List->IsFlag(BrokenPkg,pkgOrderList::Loop) && PkgLoop) + { + // This dependency has already been dealt with by another SmartUnPack on Pkg + break; } else { - if (Debug) + // Found a break, so see if we can unpack the package to avoid it + // but do not set loop if another SmartUnPack already deals with it + // Also, avoid it if the package we would unpack pre-depends on this one + VerIterator InstallVer(Cache,Cache[BrokenPkg].InstallVer); + bool circle = false; + for (pkgCache::DepIterator D = InstallVer.DependsList(); D.end() == false; ++D) { - cout << OutputInDepth(Depth) << " Unpacking " << BrokenPkg.FullName() << " to avoid " << End; - if (PkgLoop == true) - cout << " (Looping)"; - cout << std::endl; + if (D->Type != pkgCache::Dep::PreDepends) + continue; + SPtrArray VL = D.AllTargets(); + for (Version **I = VL; *I != 0; ++I) + { + VerIterator V(Cache,*I); + PkgIterator P = V.ParentPkg(); + // we are checking for installation as an easy 'protection' against or-groups and (unchosen) providers + if (P != Pkg || (P.CurrentVer() != V && Cache[P].InstallVer != V)) + continue; + circle = true; + break; + } + if (circle == true) + break; + } + if (circle == true) + { + if (Debug) + clog << OutputInDepth(Depth) << " Avoiding " << End << " avoided as " << BrokenPkg.FullName() << " has a pre-depends on " << Pkg.FullName() << std::endl; + continue; + } + else + { + if (Debug) + { + clog << OutputInDepth(Depth) << " Unpacking " << BrokenPkg.FullName() << " to avoid " << End; + if (PkgLoop == true) + clog << " (Looping)"; + clog << std::endl; + } + if (PkgLoop == false) + List->Flag(Pkg,pkgOrderList::Loop); + if (SmartUnPack(BrokenPkg, false, Depth + 1) == true) + { + if (List->IsFlag(BrokenPkg,pkgOrderList::Loop) == false) + Changed = true; + } + if (PkgLoop == false) + List->RmFlag(Pkg,pkgOrderList::Loop); } - if (PkgLoop == false) - List->Flag(Pkg,pkgOrderList::Loop); - SmartUnPack(BrokenPkg, false, Depth + 1); - if (PkgLoop == false) - List->RmFlag(Pkg,pkgOrderList::Loop); } } - } else { // Check if a package needs to be removed - if (Cache[BrokenPkg].Delete() == true && !List->IsFlag(BrokenPkg,pkgOrderList::Configured)) + else if (Cache[BrokenPkg].Delete() == true && List->IsFlag(BrokenPkg,pkgOrderList::Configured) == false) { if (Debug) - cout << OutputInDepth(Depth) << " Removing " << BrokenPkg.FullName() << " to avoid " << End << endl; + clog << OutputInDepth(Depth) << " Removing " << BrokenPkg.FullName() << " to avoid " << End << endl; SmartRemove(BrokenPkg); } } } } - } + if (i++ > max_loops) + return _error->Error("Internal error: APT::pkgPackageManager::MaxLoopCount reached in SmartConfigure for %s, aborting", Pkg.FullName().c_str()); + } while (Changed == true); // Check for reverse conflicts. if (CheckRConflicts(Pkg,Pkg.RevDependsList(), @@ -814,7 +882,10 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate, int c This way we avoid that M-A: enabled packages are installed before their older non-M-A enabled packages are replaced by newer versions */ bool const installed = Pkg->CurrentVer != 0; - if (installed == true && Install(Pkg,FileNames[Pkg->ID]) == false) + if (installed == true && + (instVer != Pkg.CurrentVer() || + ((Cache[Pkg].iFlags & pkgDepCache::ReInstall) == pkgDepCache::ReInstall)) && + Install(Pkg,FileNames[Pkg->ID]) == false) return false; for (PkgIterator P = Pkg.Group().PackageList(); P.end() == false; P = Pkg.Group().NextPkg(P)) @@ -832,6 +903,7 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate, int c P.end() == false; P = Pkg.Group().NextPkg(P)) { if (P->CurrentVer != 0 || P == Pkg || List->IsFlag(P,pkgOrderList::UnPacked) == true || + List->IsFlag(P,pkgOrderList::Configured) == true || Cache[P].InstallVer == 0 || (P.CurrentVer() == Cache[P].InstallVer && (Cache[Pkg].iFlags & pkgDepCache::ReInstall) != pkgDepCache::ReInstall)) continue; @@ -840,7 +912,9 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate, int c } } // packages which are already unpacked don't need to be unpacked again - else if (Pkg.State() != pkgCache::PkgIterator::NeedsConfigure && Install(Pkg,FileNames[Pkg->ID]) == false) + else if ((instVer != Pkg.CurrentVer() || + ((Cache[Pkg].iFlags & pkgDepCache::ReInstall) == pkgDepCache::ReInstall)) && + Install(Pkg,FileNames[Pkg->ID]) == false) return false; if (Immediate == true) { @@ -930,7 +1004,7 @@ pkgPackageManager::OrderResult pkgPackageManager::OrderInstall() DoneSomething = true; if (ImmConfigureAll) { - /* ConfigureAll here to pick up and packages left unconfigured becuase they were unpacked in the + /* ConfigureAll here to pick up and packages left unconfigured because they were unpacked in the "PreUnpack Checks" section */ if (!ConfigureAll()) return Failed; @@ -953,33 +1027,79 @@ pkgPackageManager::OrderResult pkgPackageManager::OrderInstall() } return Completed; +} +// PM::DoInstallPostFork - compat /*{{{*/ +// --------------------------------------------------------------------- + /*}}}*/ +#if (APT_PKG_MAJOR >= 4 && APT_PKG_MINOR >= 13) +pkgPackageManager::OrderResult +pkgPackageManager::DoInstallPostFork(int statusFd) +{ + APT::Progress::PackageManager *progress = new + APT::Progress::PackageManagerProgressFd(statusFd); + pkgPackageManager::OrderResult res = DoInstallPostFork(progress); + delete progress; + return res; } /*}}}*/ // PM::DoInstallPostFork - Does install part that happens after the fork /*{{{*/ // --------------------------------------------------------------------- pkgPackageManager::OrderResult -pkgPackageManager::DoInstallPostFork(int statusFd) +pkgPackageManager::DoInstallPostFork(APT::Progress::PackageManager *progress) { - if(statusFd > 0) - // FIXME: use SetCloseExec here once it taught about throwing - // exceptions instead of doing _exit(100) on failure - fcntl(statusFd,F_SETFD,FD_CLOEXEC); - bool goResult = Go(statusFd); - if(goResult == false) - return Failed; - - return Res; + bool goResult = Go(progress); + if(goResult == false) + return Failed; + + return Res; }; +#else +pkgPackageManager::OrderResult +pkgPackageManager::DoInstallPostFork(int statusFd) +{ + bool goResult = Go(statusFd); + if(goResult == false) + return Failed; + + return Res; +} +#endif + /*}}}*/ +// PM::DoInstall - Does the installation /*{{{*/ +// --------------------------------------------------------------------- +/* compat */ +#if (APT_PKG_MAJOR >= 4 && APT_PKG_MINOR >= 13) +pkgPackageManager::OrderResult +pkgPackageManager::DoInstall(int statusFd) +{ + APT::Progress::PackageManager *progress = new + APT::Progress::PackageManagerProgressFd(statusFd); + OrderResult res = DoInstall(progress); + delete progress; + return res; + } +#else +pkgPackageManager::OrderResult pkgPackageManager::DoInstall(int statusFd) +{ + if(DoInstallPreFork() == Failed) + return Failed; + return DoInstallPostFork(statusFd); +} +#endif + /*}}}*/ // PM::DoInstall - Does the installation /*{{{*/ // --------------------------------------------------------------------- /* This uses the filenames in FileNames and the information in the DepCache to perform the installation of packages.*/ -pkgPackageManager::OrderResult pkgPackageManager::DoInstall(int statusFd) +#if (APT_PKG_MAJOR >= 4 && APT_PKG_MINOR >= 13) +pkgPackageManager::OrderResult +pkgPackageManager::DoInstall(APT::Progress::PackageManager *progress) { if(DoInstallPreFork() == Failed) return Failed; - return DoInstallPostFork(statusFd); + return DoInstallPostFork(progress); } +#endif /*}}}*/