X-Git-Url: https://git.saurik.com/apt.git/blobdiff_plain/13df96c5f3a70fd2d49e0622c9e1f7d5f76cc5dd..b105ca65292e4af6ca2093351fd2a61180054e14:/doc/po/es.po diff --git a/doc/po/es.po b/doc/po/es.po index 2e87d8e54..08f2c91ff 100644 --- a/doc/po/es.po +++ b/doc/po/es.po @@ -38,7 +38,7 @@ msgid "" msgstr "" "Project-Id-Version: apt-doc 1.0.5\n" "Report-Msgid-Bugs-To: APT Development Team \n" -"POT-Creation-Date: 2016-03-07 19:50+0100\n" +"POT-Creation-Date: 2016-09-20 23:54+0200\n" "PO-Revision-Date: 2014-07-04 01:31+0200\n" "Last-Translator: Omar Campagne \n" "Language-Team: Debian l10n Spanish \n" @@ -779,7 +779,7 @@ msgid "" msgstr "" #. type: Content of: -#: apt.8.xml +#: apt.8.xml apt-key.8.xml msgid "," msgstr "" @@ -1449,8 +1449,8 @@ msgid "" "command is mainly used as an interface for external tools working with APT " "to get information as well as filenames for downloaded files so they can use " "them as well instead of downloading them again on their own. Detailed " -"documentation is omitted here and can instead be found in the source tree in " -"doc/acquire-additional-files.txt." +"documentation is omitted here and can instead be found in the file &apt-" +"acquire-additional-files; shipped by the apt-doc package." msgstr "" #. type: Content of: @@ -1636,9 +1636,13 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-get.8.xml +#, fuzzy +#| msgid "" +#| "Show upgraded packages; print out a list of all packages that are to be " +#| "upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>." msgid "" -"Show upgraded packages; print out a list of all packages that are to be " -"upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>." +"Do not show a list of all packages that are to be upgraded. Configuration " +"Item: <literal>APT::Get::Show-Upgraded</literal>." msgstr "" "Muestra los paquetes que se van a actualizar. Opción de configuración: " "<literal>APT::Get::Show-Upgraded</literal>." @@ -2035,8 +2039,9 @@ msgstr "" #: apt-get.8.xml msgid "" "Forbid the update command to acquire unverifiable data from configured " -"sources. Apt will fail at the update command for repositories without valid " -"cryptographically signatures. Configuration Item: <literal>Acquire::" +"sources. APT will fail at the update command for repositories without valid " +"cryptographically signatures. See also &apt-secure; for details on the " +"concept and the implications. Configuration Item: <literal>Acquire::" "AllowInsecureRepositories</literal>." msgstr "" @@ -2050,6 +2055,14 @@ msgid "" "literal>." msgstr "" +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-get.8.xml +msgid "" +"Adds the given file as a source for metadata. Can be repeated to add " +"multiple files. See <option>--with-source</option> description in &apt-" +"cache; for further details." +msgstr "" + #. type: Content of: <refentry><refsect1><title> #: apt-get.8.xml apt-cache.8.xml apt-key.8.xml apt-mark.8.xml apt.conf.5.xml #: apt_preferences.5.xml @@ -2632,11 +2645,10 @@ msgstr "" msgid "" "Per default <command>depends</command> and <command>rdepends</command> print " "only dependencies explicitly expressed in the metadata. With this flag it " -"will also show dependencies implicitely added based on the encountered " -"data. A <literal>Conflicts: foo</literal> e.g. expresses implicitely that " -"this package also conflicts with the package foo from any other " -"architecture. Configuration Item: <literal>APT::Cache::ShowImplicit</" -"literal>." +"will also show dependencies implicitly added based on the encountered data. " +"A <literal>Conflicts: foo</literal> e.g. expresses implicitly that this " +"package also conflicts with the package foo from any other architecture. " +"Configuration Item: <literal>APT::Cache::ShowImplicit</literal>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> @@ -2723,6 +2735,39 @@ msgstr "" "a paquetes actualmente instalados. Opción de configuración: <literal>APT::" "Cache::Installed</literal>." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml +msgid "" +"Adds the given file as a source for metadata. Can be repeated to add " +"multiple files. Supported are currently <literal>*.deb</literal>, " +"<literal>*.dsc</literal>, <literal>*.changes</literal>, <literal>Sources</" +"literal> and <literal>Packages</literal> files as well as source package " +"directories. Files are matched based on their name only, not their content!" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml +msgid "" +"<literal>Sources</literal> and <literal>Packages</literal> can be compressed " +"in any format apt supports as long as they have the correct extension. If " +"you need to store multiple of these files in one directory you can prefix a " +"name of your choice with the last character being an underscore " +"(\"<literal>_</literal>\"). Example: my.example_Packages.xz" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-cache.8.xml +#, fuzzy +#| msgid "" +#| "Use source index field ordering. Configuration Item: <literal>APT::" +#| "SortPkgs::Source</literal>." +msgid "" +"Note that these sources are treated as trusted (see &apt-secure;). " +"Configuration Item: <literal>APT::Sources::With</literal>." +msgstr "" +"Utililza el orden por el campo de índice de fuentes. Opción de " +"configuración: <literal>APT::SortPkgs::Source</literal>." + #. type: Content of: <refentry><refsect1><para> #: apt-cache.8.xml msgid "&apt-conf;, &sources-list;, &apt-get;" @@ -2753,6 +2798,18 @@ msgstr "" "usa para autenticar paquetes. Los paquetes autenticados mediante estas " "claves se consideran de confianza." +#. type: Content of: <refentry><refsect1><para> +#: apt-key.8.xml +msgid "" +"Note that if usage of <command>apt-key</command> is desired the additional " +"installation of the GNU Privacy Guard suite (packaged in <package>gnupg</" +"package>) is required. For this reason alone the programmatic usage " +"(especially in package maintainerscripts!) is strongly discouraged. Further " +"more the output format of all commands is undefined and can and does change " +"whenever the underlying commands change. <command>apt-key</command> will try " +"to detect such usage and generates warnings on stderr in these cases." +msgstr "" + #. type: Content of: <refentry><refsect1><title> #: apt-key.8.xml msgid "Commands" @@ -2777,6 +2834,15 @@ msgid "" "otherwise the &apt-secure; infrastructure is completely undermined." msgstr "" +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml +msgid "" +"Instead of using this command a keyring can be placed directly in the " +"<filename>/etc/apt/trusted.gpg.d/</filename> directory with a descriptive " +"name (same rules for filename apply as for &apt-conf; files) and " +"\"<literal>gpg</literal>\" as file extension." +msgstr "" + #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml msgid "Remove a key from the list of trusted keys." @@ -2794,14 +2860,11 @@ msgstr "Devuelve todas las claves de confianza por la salida estándar." #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml -msgid "List trusted keys." +#, fuzzy +#| msgid "List trusted keys." +msgid "List trusted keys with fingerprints." msgstr "Lista las claves de confianza." -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt-key.8.xml -msgid "List fingerprints of trusted keys." -msgstr "Lista las huellas digitales de las claves de confianza." - #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml msgid "" @@ -2811,6 +2874,11 @@ msgid "" "to completely undermine the &apt-secure; infrastructure if used without care." msgstr "" +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> +#: apt-key.8.xml +msgid "(deprecated)" +msgstr "" + #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml msgid "" @@ -2825,6 +2893,16 @@ msgstr "" "keyring</literal> de su distribución; esto es, el paquete &keyring-package; " "en &keyring-distro;." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt-key.8.xml +msgid "" +"Note that a distribution does not need to and in fact should not use this " +"command any longer and instead ship keyring files in the <filename>/etc/apt/" +"trusted.gpg</filename> directory directly as this avoids a dependency on " +"<package>gnupg</package> and it is easier to manage keys by simply adding " +"and removing files for maintainers and users alike." +msgstr "" + #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-key.8.xml msgid "" @@ -2874,38 +2952,6 @@ msgstr "" "<filename>trusted.gpg</filename> es el registro de claves principal, esto " "es, por ejemplo, que las claves nuevas se añaden a este fichero." -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt-key.8.xml -msgid "<filename>/etc/apt/trustdb.gpg</filename>" -msgstr "<filename>/etc/apt/trustdb.gpg</filename>" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt-key.8.xml -msgid "Local trust database of archive keys." -msgstr "Base de datos local de las claves de confianza de archivos Debian" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt-key.8.xml -msgid "&keyring-filename;" -msgstr "&keyring-filename;" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt-key.8.xml -msgid "Keyring of &keyring-distro; archive trusted keys." -msgstr "Registro de las claves de confianza del archivo de &keyring-distro;." - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> -#: apt-key.8.xml -msgid "&keyring-removed-filename;" -msgstr "&keyring-removed-filename;" - -#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> -#: apt-key.8.xml -msgid "Keyring of &keyring-distro; archive removed trusted keys." -msgstr "" -"Registro de las claves de confianza eliminadas del archivo de &keyring-" -"distro;." - #. type: Content of: <refentry><refsect1><para> #: apt-key.8.xml msgid "&apt-get;, &apt-secure;" @@ -3100,7 +3146,9 @@ msgid "" "Starting with version 0.6, <command>APT</command> contains code that does " "signature checking of the Release file for all repositories. This ensures " "that data like packages in the archive can't be modified by people who have " -"no access to the Release file signing key." +"no access to the Release file signing key. Starting with version 1.1 " +"<command>APT</command> requires repositories to provide recent " +"authentication information for unimpeded usage of the repository." msgstr "" "Desde la versión 0.6, <command>apt</command> contiene el código que realiza " "la comprobación de la firma del fichero «Release» para todos los archivos. " @@ -3111,20 +3159,48 @@ msgstr "" #: apt-secure.8.xml msgid "" "If an archive has an unsigned Release file or no Release file at all current " -"APT versions will raise a warning in <command>update</command> operations " -"and front-ends like <command>apt-get</command> will require explicit " -"confirmation if an installation request includes a package from such an " -"unauthenticated archive." +"APT versions will refuse to download data from them by default in " +"<command>update</command> operations and even if forced to download front-" +"ends like &apt-get; will require explicit confirmation if an installation " +"request includes a package from such an unauthenticated archive." msgstr "" #. type: Content of: <refentry><refsect1><para> #: apt-secure.8.xml msgid "" -"In the future APT will refuse to work with unauthenticated repositories by " -"default until support for them is removed entirely. Users have the option to " -"opt-in to this behavior already by setting the configuration option " -"<option>Acquire::AllowInsecureRepositories</option> to <literal>false</" -"literal>." +"As a temporary exception &apt-get; (not &apt;!) raises warnings only if it " +"encounters unauthenticated archives to give a slightly longer grace period " +"on this backward compatibility effecting change. This exception will be " +"removed in future releases and you can opt-out of this grace period by " +"setting the configuration option <option>Binary::apt-get::Acquire::" +"AllowInsecureRepositories</option> to <literal>false</literal> or <option>--" +"no-allow-insecure-repositories</option> on the command line." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml +msgid "" +"You can force all APT clients to raise only warnings by setting the " +"configuration option <option>Acquire::AllowInsecureRepositories</option> to " +"<literal>true</literal>. Individual repositories can also be allowed to be " +"insecure via the &sources-list; option <literal>allow-insecure=yes</" +"literal>. Note that insecure repositories are strongly discouraged and all " +"options to force apt to continue supporting them will eventually be " +"removed. Users also have the <option>Trusted</option> option available to " +"disable even the warnings, but be sure to understand the implications as " +"detailed in &sources-list;." +msgstr "" + +#. type: Content of: <refentry><refsect1><para> +#: apt-secure.8.xml +msgid "" +"A repository which previously was authentication but would loose this state " +"in an <command>update</command> operation raises an error in all APT clients " +"irrespective of the option to allow or forbid usage of insecure " +"repositories. The error can be overcome by additionally setting " +"<option>Acquire::AllowDowngradeToInsecureRepositories</option> to " +"<literal>true</literal> or for Individual repositories with the &sources-" +"list; option <literal>allow-downgrade-to-insecure=yes</literal>." msgstr "" #. type: Content of: <refentry><refsect1><para> @@ -4113,6 +4189,33 @@ msgstr "" "las arquitecturas externas se añaden al registro mediante <command>dpkg --" "add-architecture</command>." +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml +msgid "" +"This scope defines which compression formats are supported, how compression " +"and decompression can be performed if support for this format isn't built " +"into apt directly and a cost-value indicating how costly it is to compress " +"something in this format. As an example the following configuration stanza " +"would allow apt to download and uncompress as well as create and store files " +"with the low-cost <literal>.reversed</literal> file extension which it will " +"pass to the command <command>rev</command> without additional commandline " +"parameters for compression and uncompression:" +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><informalexample><programlisting> +#: apt.conf.5.xml +#, no-wrap +msgid "" +"APT::Compressor::rev {\n" +"\tName \"rev\";\n" +"\tExtension \".reversed\";\n" +"\tBinary \"rev\";\n" +"\tCompressArg {};\n" +"\tUncompressArg {};\n" +"\tCost \"10\";\n" +"};\n" +msgstr "" + #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml msgid "" @@ -4646,14 +4749,17 @@ msgstr "" #: apt.conf.5.xml msgid "" "<literal>Acquire::http::Proxy-Auto-Detect</literal> can be used to specify " -"an external command to discover the http proxy to use. Apt expects the " -"command to output the proxy on stdout in the style <literal>http://proxy:" -"port/</literal>. This will override the generic <literal>Acquire::http::" -"Proxy</literal> but not any specific host proxy configuration set via " -"<literal>Acquire::http::Proxy::$HOST</literal>. See the &squid-deb-proxy-" -"client; package for an example implementation that uses avahi. This option " -"takes precedence over the legacy option name <literal>ProxyAutoDetect</" -"literal>." +"an external command to discover the http proxy to use. The first and only " +"parameter is an URI denoting the host to be contacted to allow for host-" +"specific configuration. APT expects the command to output the proxy on " +"stdout as a single line in the style <literal>http://proxy:port/</literal> " +"or the word <literal>DIRECT</literal> if no proxy should be used. No output " +"indicates that the generic proxy settings should be used. Note that auto-" +"detection will not be used for a host if a host-specific proxy configuration " +"is already set via <literal>Acquire::http::Proxy::<replaceable>HOST</" +"replaceable></literal>. See the &squid-deb-proxy-client; package for an " +"example implementation that uses avahi. This option takes precedence over " +"the legacy option name <literal>ProxyAutoDetect</literal>." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> @@ -4838,14 +4944,23 @@ msgstr "Acquire::CompressionTypes::<replaceable>extensión-del-fichero</replacea #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml +#, fuzzy +#| msgid "" +#| "List of compression types which are understood by the acquire methods. " +#| "Files like <filename>Packages</filename> can be available in various " +#| "compression formats. By default the acquire methods can decompress " +#| "<command>bzip2</command>, <command>lzma</command> and <command>gzip</" +#| "command> compressed files; with this setting more formats can be added on " +#| "the fly or the used method can be changed. The syntax for this is: " +#| "<placeholder type=\"synopsis\" id=\"0\"/>" msgid "" "List of compression types which are understood by the acquire methods. " "Files like <filename>Packages</filename> can be available in various " -"compression formats. By default the acquire methods can decompress " -"<command>bzip2</command>, <command>lzma</command> and <command>gzip</" -"command> compressed files; with this setting more formats can be added on " -"the fly or the used method can be changed. The syntax for this is: " -"<placeholder type=\"synopsis\" id=\"0\"/>" +"compression formats. By default the acquire methods can decompress and " +"recompress many common formats like <command>xz</command> and <command>gzip</" +"command>; with this scope the supported formats can be queried, modified as " +"well as support for more formats added (see also <option>APT::Compressor</" +"option>). The syntax for this is: <placeholder type=\"synopsis\" id=\"0\"/>" msgstr "" "Lista de los tipos de compresión que se pueden usar en los métodos de " "«acquire». Los ficheros como <filename>Packages</filename> pueden estar " @@ -4864,26 +4979,41 @@ msgstr "Acquire::CompressionTypes::Order:: \"gz\";" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis> #: apt.conf.5.xml -#, no-wrap -msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" +#, fuzzy, no-wrap +#| msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" +msgid "Acquire::CompressionTypes::Order { \"xz\"; \"gz\"; };" msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml +#, fuzzy +#| msgid "" +#| "Also, the <literal>Order</literal> subgroup can be used to define in " +#| "which order the acquire system will try to download the compressed files. " +#| "The acquire system will try the first and proceed with the next " +#| "compression type in this list on error, so to prefer one over the other " +#| "type simply add the preferred type first - default types not already " +#| "added will be implicitly appended to the end of the list, so e.g. " +#| "<placeholder type=\"synopsis\" id=\"0\"/> can be used to prefer " +#| "<command>gzip</command> compressed files over <command>bzip2</command> " +#| "and <command>lzma</command>. If <command>lzma</command> should be " +#| "preferred over <command>gzip</command> and <command>bzip2</command> the " +#| "configure setting should look like this: <placeholder type=\"synopsis\" " +#| "id=\"1\"/> It is not needed to add <literal>bz2</literal> to the list " +#| "explicitly as it will be added automatically." msgid "" "Also, the <literal>Order</literal> subgroup can be used to define in which " "order the acquire system will try to download the compressed files. The " "acquire system will try the first and proceed with the next compression type " "in this list on error, so to prefer one over the other type simply add the " -"preferred type first - default types not already added will be implicitly " -"appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id=" -"\"0\"/> can be used to prefer <command>gzip</command> compressed files over " -"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</" -"command> should be preferred over <command>gzip</command> and " -"<command>bzip2</command> the configure setting should look like this: " -"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add " -"<literal>bz2</literal> to the list explicitly as it will be added " -"automatically." +"preferred type first - types not already added will be implicitly appended " +"to the end of the list, so e.g. <placeholder type=\"synopsis\" id=\"0\"/> " +"can be used to prefer <command>gzip</command> compressed files over all " +"other compression formats. If <command>xz</command> should be preferred " +"over <command>gzip</command> and <command>bzip2</command> the configure " +"setting should look like this: <placeholder type=\"synopsis\" id=\"1\"/> It " +"is not needed to add <literal>bz2</literal> to the list explicitly as it " +"will be added automatically." msgstr "" "El subgrupo <literal>Order</literal> también se puede usar para definir en " "qué orden el sistema de «acquire» intentará descargar los ficheros " @@ -4908,17 +5038,30 @@ msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml +#, fuzzy +#| msgid "" +#| "Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></" +#| "literal> will be checked at run time. If this option has been set, the " +#| "method will only be used if this file exists; e.g. for the " +#| "<literal>bzip2</literal> method (the inbuilt) setting is: <placeholder " +#| "type=\"literallayout\" id=\"0\"/> Note also that list entries specified " +#| "on the command line will be added at the end of the list specified in the " +#| "configuration files, but before the default entries. To prefer a type in " +#| "this case over the ones specified in the configuration files you can set " +#| "the option direct - not in list style. This will not override the " +#| "defined list; it will only prefix the list with this type." msgid "" "Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></" -"literal> will be checked at run time. If this option has been set, the " -"method will only be used if this file exists; e.g. for the <literal>bzip2</" -"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout" -"\" id=\"0\"/> Note also that list entries specified on the command line will " -"be added at the end of the list specified in the configuration files, but " -"before the default entries. To prefer a type in this case over the ones " -"specified in the configuration files you can set the option direct - not in " -"list style. This will not override the defined list; it will only prefix " -"the list with this type." +"literal> will be checked at run time. If this option has been set and " +"support for this format isn't directly built into apt, the method will only " +"be used if this file exists; e.g. for the <literal>bzip2</literal> method " +"(the inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> " +"Note also that list entries specified on the command line will be added at " +"the end of the list specified in the configuration files, but before the " +"default entries. To prefer a type in this case over the ones specified in " +"the configuration files you can set the option direct - not in list style. " +"This will not override the defined list; it will only prefix the list with " +"this type." msgstr "" "Tenga en cuenta que <literal>Dir::Bin::<replaceable>método</replaceable></" "literal> se comprueba en tiempo de ejecución. Si se define esta opción, el " @@ -5063,21 +5206,30 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml msgid "" -"Allow the update operation to load data files from a repository without a " -"trusted signature. If enabled this option no data files will be loaded and " -"the update operation fails with a error for this source. The default is " -"false for backward compatibility. This will be changed in the future." +"Allow update operations to load data files from repositories without " +"sufficient security information. The default value is \"<literal>false</" +"literal>\". Concept, implications as well as alternatives are detailed in " +"&apt-secure;." +msgstr "" + +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> +#: apt.conf.5.xml +msgid "" +"Allow update operations to load data files from repositories which provide " +"security information, but these are deemed no longer cryptographically " +"strong enough. The default value is \"<literal>false</literal>\". Concept, " +"implications as well as alternatives are detailed in &apt-secure;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml msgid "" "Allow that a repository that was previously gpg signed to become unsigned " -"durign a update operation. When there is no valid signature of a perviously " -"trusted repository apt will refuse the update. This option can be used to " -"override this protection. You almost certainly never want to enable this. " -"The default is false. Note that apt will still consider packages from this " -"source untrusted and warn about them if you try to install them." +"during an update operation. When there is no valid signature for a " +"previously trusted repository apt will refuse the update. This option can be " +"used to override this protection. You almost certainly never want to enable " +"this. The default is <literal>false</literal>. Concept, implications as " +"well as alternatives are detailed in &apt-secure;." msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term> @@ -5515,138 +5667,22 @@ msgstr "" "el comportamiento predeterminado se limita a deshabilitar el firmado de " "paquetes y a producir todos los binarios." -#. type: Content of: <refentry><refsect1><refsect2><title> -#: apt.conf.5.xml -msgid "dpkg trigger usage (and related options)" -msgstr "Uso del disparador de dpkg (y de las opciones relacionadas)" - -#. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml -msgid "" -"APT can call &dpkg; in such a way as to let it make aggressive use of " -"triggers over multiple calls of &dpkg;. Without further options &dpkg; will " -"use triggers once each time it runs. Activating these options can therefore " -"decrease the time needed to perform the install or upgrade. Note that it is " -"intended to activate these options per default in the future, but as it " -"drastically changes the way APT calls &dpkg; it needs a lot more testing. " -"<emphasis>These options are therefore currently experimental and should not " -"be used in production environments.</emphasis> It also breaks progress " -"reporting such that all front-ends will currently stay around half (or more) " -"of the time in the 100% state while it actually configures all packages." -msgstr "" -"APT puede invocar &dpkg; de forma que pueda hacer un uso agresivo de los " -"disparadores («triggers») mediante varias invocaciones a &dpkg;. Sin no se " -"definen más opciones, &dpkg; utilizará los disparadores una durante su " -"ejecución. Si se activan estas opciones, se puede reducir el tiempo " -"necesario para realizar la instalación o la actualización. Tenga en cuenta " -"que está diseñado para que estas opciones se activen de forma predeterminada " -"en un futuro, pero debido a los cambios drásticos en la manera en que APT " -"invoca a &dpkg;, necesita más pruebas. <emphasis>Actualmente, estas opciones " -"son experimentales, y no se deberían usar en entornos de producción.</" -"emphasis> También provoca un fallo en el informe de progreso, con lo que " -"todas las interfaces muestran un progreso del 100% durante la mitad del " -"tiempo (o más) durante la configuración de todos los paquetes." - -#. type: Content of: <refentry><refsect1><refsect2><para><literallayout> -#: apt.conf.5.xml -#, no-wrap -msgid "" -"DPkg::NoTriggers \"true\";\n" -"PackageManager::Configure \"smart\";\n" -"DPkg::ConfigurePending \"true\";\n" -"DPkg::TriggersPending \"true\";" -msgstr "" -"DPkg::NoTriggers \"true\";\n" -"PackageManager::Configure \"smart\";\n" -"DPkg::ConfigurePending \"true\";\n" -"DPkg::TriggersPending \"true\";" - -#. type: Content of: <refentry><refsect1><refsect2><para> -#: apt.conf.5.xml -msgid "" -"Note that it is not guaranteed that APT will support these options or that " -"these options will not cause (big) trouble in the future. If you have " -"understand the current risks and problems with these options, but are brave " -"enough to help testing them, create a new configuration file and test a " -"combination of options. Please report any bugs, problems and improvements " -"you encounter and make sure to note which options you have used in your " -"reports. Asking &dpkg; for help could also be useful for debugging proposes, " -"see e.g. <command>dpkg --audit</command>. A defensive option combination " -"would be <placeholder type=\"literallayout\" id=\"0\"/>" -msgstr "" -"Tenga en cuenta que no se garantiza que APT permitirá usar estas opciones o " -"que estas opciones no causen un (gran) problema en el futuro. Si ha " -"entendido los riesgos y los problemas actuales con estas opciones pero es lo " -"suficientemente valiente para ayudar a probarlas, cree un nuevo fichero de " -"configuración y pruebe una combinación de las opciones. Por favor, informe " -"de cualquier error, problema o mejora que encuentre y asegúrese de apuntar " -"en sus informes qué opciones ha usado. Pedir ayuda a &dpkg; también puede " -"ser útil por motivos de depuración, véase por ejemplo: <command>dpkg --" -"audit</command>. Una combinación de opciones defensivas sería <placeholder " -"type=\"literallayout\" id=\"0\"/>" - -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml -msgid "" -"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending " -"call). See &dpkg; if you are interested in what this actually means. In " -"short: &dpkg; will not run the triggers when this flag is present unless it " -"is explicitly called to do so in an extra call. Note that this option " -"exists (undocumented) also in older APT versions with a slightly different " -"meaning: Previously these option only append --no-triggers to the configure " -"calls to &dpkg; - now APT will also add this flag to the unpack and remove " -"calls." -msgstr "" -"Añade a todas las invocaciones a &dpkg; la opción sin disparadores («no " -"triggers»), excepto a la invocación a «ConfigurePending». Consulte &dpkg; si " -"está interesado en saber qué significa esto. De forma breve: &dpkg; no " -"ejecuta los disparadores cuando está opción está presente a menos que se " -"ejecute explícitamente con una invocación adicional. Tenga en cuenta que " -"esta opción también existe en versiones antiguas de APT (aunque sin " -"documentar) con un significado diferente. Anteriormente sólo se añadía la " -"opción «--no-triggers» a las invocaciones de la configuración para &dpkg;, " -"ahora APT también añade esta opción a las invocaciones de desempaquetado y " -"eliminación." - -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml -msgid "" -"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " -"and \"<literal>no</literal>\". The default value is \"<literal>all</literal>" -"\", which causes APT to configure all packages. The \"<literal>smart</" -"literal>\" way is to configure only packages which need to be configured " -"before another package can be unpacked (Pre-Depends), and let the rest be " -"configured by &dpkg; with a call generated by the ConfigurePending option " -"(see below). On the other hand, \"<literal>no</literal>\" will not configure " -"anything, and totally relies on &dpkg; for configuration (which at the " -"moment will fail if a Pre-Depends is encountered). Setting this option to " -"any value other than <literal>all</literal> will implicitly also activate " -"the next option by default, as otherwise the system could end in an " -"unconfigured and potentially unbootable state." -msgstr "" -"Los valores válidos son «<literal>all</literal>», «<literal>smart</" -"literal>» y «<literal>no</literal>». El valor predeterminado es " -"«<literal>all</literal>», que hace que APT configure todos los paquetes. El " -"valor «<literal>smart</literal>» sólo configura los paquetes que requieren " -"ser configurados antes de que se desempaquete otro paquete (predependencia) " -"y permite que &dpkg; configure los restantes con una invocación generada por " -"la opción «ConfigurePending» (más abajo). El valor «<literal>no</literal>» " -"no configura nada y depende por completo de &dpkg; para la configuración " -"(que fallará si se encuentra una pre-dependencia). Si se define esta opción " -"con un valor distinto a «<literal>all</literal>» activa implícitamente la " -"siguiente opción de forma predeterminada, ya que de otro modo el sistema " -"podría terminar en un estado mal configurado qué podría derivar en la " -"imposibilidad de arrancar el sistema. " - -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> +#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt.conf.5.xml +#, fuzzy +#| msgid "" +#| "If this option is set APT will call <command>dpkg --configure --pending</" +#| "command> to let &dpkg; handle all required configurations and triggers. " +#| "This option is activated automatically per default if the previous option " +#| "is not set to <literal>all</literal>, but deactivating it could be useful " +#| "if you want to run APT multiple times in a row - e.g. in an installer. In " +#| "these sceneries you could deactivate this option in all but the last run." msgid "" "If this option is set APT will call <command>dpkg --configure --pending</" "command> to let &dpkg; handle all required configurations and triggers. This " -"option is activated automatically per default if the previous option is not " -"set to <literal>all</literal>, but deactivating it could be useful if you " -"want to run APT multiple times in a row - e.g. in an installer. In these " -"sceneries you could deactivate this option in all but the last run." +"option is activated by default, but deactivating it could be useful if you " +"want to run APT multiple times in a row - e.g. in an installer. In this " +"scenario you could deactivate this option in all but the last run." msgstr "" "Si define esta opción, APT ejecutará <command>dpkg --configure --pending</" "command> para permitir a dpkg manejar todas las configuraciones necesarias y " @@ -5656,65 +5692,6 @@ msgstr "" "veces seguidas, por ejemplo: en un instalador. En estas situaciones podría " "desactivar esta opción en todas las ejecuciones menos la última." -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml -msgid "" -"Useful for the <literal>smart</literal> configuration as a package which has " -"pending triggers is not considered as <literal>installed</literal>, and " -"&dpkg; treats them as <literal>unpacked</literal> currently which is a " -"showstopper for Pre-Dependencies (see debbugs #526774). Note that this will " -"process all triggers, not only the triggers needed to configure this package." -msgstr "" -"Útil para una configuración <literal>smart</literal> en la que un paquete " -"que tiene disparadores pendientes no se considera como <literal>instalado</" -"literal> y que dpkg lo trata como <literal>desempaquetado</literal>, lo cual " -"entra en conflicto con el sistema de pre-dependencias (véase debbugs " -"#526774). Tenga en cuenta que esto procesará todos los disparadores, no sólo " -"los disparadores necesarios para configurar este paquete." - -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout> -#: apt.conf.5.xml -#, no-wrap -msgid "" -"OrderList::Score {\n" -"\tDelete 500;\n" -"\tEssential 200;\n" -"\tImmediate 10;\n" -"\tPreDepends 50;\n" -"};" -msgstr "" -"OrderList::Score {\n" -"\tDelete 500;\n" -"\tEssential 200;\n" -"\tImmediate 10;\n" -"\tPreDepends 50;\n" -"};" - -#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> -#: apt.conf.5.xml -msgid "" -"Essential packages (and their dependencies) should be configured immediately " -"after unpacking. It is a good idea to do this quite early in the upgrade " -"process as these configure calls also currently require <literal>DPkg::" -"TriggersPending</literal> which will run quite a few triggers (which may not " -"be needed). Essentials get per default a high score but the immediate flag " -"is relatively low (a package which has a Pre-Depends is rated higher). " -"These option and the others in the same group can be used to change the " -"scoring. The following example shows the settings with their default " -"values. <placeholder type=\"literallayout\" id=\"0\"/>" -msgstr "" -"Los paquetes esenciales (y sus dependencias) se deberían configurar " -"inmediatamente después de desempaquetarlos. Se recomienda realizarlo lo más " -"pronto posible en el proceso de actualización ya que actualmente estas " -"invocaciones de configuración también necesitan <literal>DPkg::" -"TriggersPending</literal>, que ejecuta varios disparadores (que puede que no " -"sean necesarios). Los esenciales tienen, de forma predeterminada, una " -"puntuación alta pero la opción inmediata es relativamente baja (un paquete " -"que tenga pre-dependencias tiene una puntuación más alta). Puede cambiar la " -"puntuación mediante esta opción y las otras del mismo grupo. El siguiente " -"ejemplo muestra la configuración con los valores predeterminados. " -"<placeholder type=\"literallayout\" id=\"0\"/>" - #. type: Content of: <refentry><refsect1><title> #: apt.conf.5.xml msgid "Periodic and Archives options" @@ -5725,8 +5702,8 @@ msgstr "Las opciones «Periodic» y «Archives»" msgid "" "<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups " "of options configure behavior of apt periodic updates, which is done by the " -"<literal>/etc/cron.daily/apt</literal> script. See the top of this script " -"for the brief documentation of these options." +"<literal>/usr/lib/apt/apt.systemd.daily</literal> script. See the top of " +"this script for the brief documentation of these options." msgstr "" "Los grupos de opciones <literal>APT::Periodic</literal> y <literal>APT::" "Archives</literal> configuran el comportamiento de las actualizaciones " @@ -7924,9 +7901,10 @@ msgid "" "<option>Targets</option> (<option>target</option>) is a multivalue option " "defining which download targets apt will try to acquire from this source. If " "not specified, the default set is defined by the <option>Acquire::" -"IndexTargets</option> configuration scope. Additionally, specific targets " -"can be enabled or disabled by using the identifier as field name instead of " -"using this multivalue option." +"IndexTargets</option> configuration scope (targets are specified by their " +"name in the <literal>Created-By</literal> field). Additionally, targets can " +"be enabled or disabled by using the <literal>Identifier</literal> field as " +"an option with a boolean value instead of using this multivalue option." msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> @@ -7968,6 +7946,17 @@ msgid "" "detect and error out on such anomalies." msgstr "" +#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> +#: sources.list.5.xml +msgid "" +"<option>Allow-Insecure</option> (<option>allow-insecure</option>), " +"<option>Allow-Weak</option> (<option>allow-weak</option>) and <option>Allow-" +"Downgrade-To-Insecure</option> (<option>allow-downgrade-to-insecure</" +"option>) are boolean values which all default to <literal>no</literal>. If " +"set to <literal>yes</literal> they circumvent parts of &apt-secure; and " +"should therefore not be used lightly!" +msgstr "" + #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> #: sources.list.5.xml msgid "" @@ -7990,13 +7979,14 @@ msgid "" "<option>Signed-By</option> (<option>signed-by</option>) is either an " "absolute path to a keyring file (has to be accessible and readable for the " "<literal>_apt</literal> user, so ensure everyone has read-permissions on the " -"file) or a fingerprint of a key either in the <filename>trusted.gpg</" -"filename> keyring or in one of the keyrings in the <filename>trusted.gpg.d/</" +"file) or one or more fingerprints of keys either in the <filename>trusted." +"gpg</filename> keyring or in the keyrings in the <filename>trusted.gpg.d/</" "filename> directory (see <command>apt-key fingerprint</command>). If the " -"option is set, only the key(s) in this keyring or only the key with this " -"fingerprint is used for the &apt-secure; verification of this repository. " -"Otherwise all keys in the trusted keyrings are considered valid signers for " -"this repository." +"option is set, only the key(s) in this keyring or only the keys with these " +"fingerprints are used for the &apt-secure; verification of this repository. " +"Defaults to the value of the option with the same name if set in the " +"previously acquired <filename>Release</filename> file. Otherwise all keys " +"in the trusted keyrings are considered valid signers for this repository." msgstr "" #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para> @@ -8253,8 +8243,8 @@ msgstr "" #| "deb http://ftp.debian.org/debian &debian-stable-codename; main\n" #| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main" msgid "" -"deb http://httpredir.debian.org/debian &debian-stable-codename; main\n" -"deb [ arch=amd64,armel ] http://httpredir.debian.org/debian &debian-stable-codename; main" +"deb http://deb.debian.org/debian &debian-stable-codename; main\n" +"deb [ arch=amd64,armel ] http://deb.debian.org/debian &debian-stable-codename; main" msgstr "" "deb http://ftp.debian.org/debian &debian-stable-codename; main\n" "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main" @@ -8267,12 +8257,12 @@ msgstr "" #| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main" msgid "" "Types: deb\n" -"URIs: http://httpredir.debian.org/debian\n" +"URIs: http://deb.debian.org/debian\n" "Suites: &debian-stable-codename;\n" "Components: main\n" "\n" "Types: deb\n" -"URIs: http://httpredir.debian.org/debian\n" +"URIs: http://deb.debian.org/debian\n" "Suites: &debian-stable-codename;\n" "Components: main\n" "Architectures: amd64 armel\n" @@ -8418,12 +8408,12 @@ msgstr "" #: sources.list.5.xml #, no-wrap msgid "" -"deb http://httpredir.debian.org/debian stable main contrib\n" -"deb-src http://httpredir.debian.org/debian stable main contrib\n" -"deb http://httpredir.debian.org/debian testing main contrib\n" -"deb-src http://httpredir.debian.org/debian testing main contrib\n" -"deb http://httpredir.debian.org/debian unstable main contrib\n" -"deb-src http://httpredir.debian.org/debian unstable main contrib" +"deb http://deb.debian.org/debian stable main contrib\n" +"deb-src http://deb.debian.org/debian stable main contrib\n" +"deb http://deb.debian.org/debian testing main contrib\n" +"deb-src http://deb.debian.org/debian testing main contrib\n" +"deb http://deb.debian.org/debian unstable main contrib\n" +"deb-src http://deb.debian.org/debian unstable main contrib" msgstr "" #. type: Content of: <refentry><refsect1><literallayout> @@ -8431,7 +8421,7 @@ msgstr "" #, no-wrap msgid "" "Types: deb deb-src\n" -"URIs: http://httpredir.debian.org/debian\n" +"URIs: http://deb.debian.org/debian\n" "Suites: stable testing unstable\n" "Components: main contrib\n" msgstr "" @@ -8439,9 +8429,9 @@ msgstr "" #. type: Content of: <refentry><refsect1><para> #: sources.list.5.xml #, fuzzy -#| msgid "&apt-cache; &apt-conf;" -msgid "&apt-get;, &apt-conf;" -msgstr "&apt-cache; &apt-conf;" +#| msgid "&apt-cache;, &apt-config;, &apt-preferences;." +msgid "&apt-get;, &apt-conf;, &apt-acquire-additional-files;" +msgstr "&apt-cache;, &apt-config;, &apt-preferences;." #. type: Content of: <refentry><refmeta><manvolnum> #: apt-extracttemplates.1.xml apt-sortpkgs.1.xml apt-ftparchive.1.xml @@ -8686,14 +8676,15 @@ msgstr "" msgid "" "The <literal>release</literal> command generates a Release file from a " "directory tree. It recursively searches the given directory for uncompressed " -"<filename>Packages</filename> and <filename>Sources</filename> files and " -"ones compressed with <command>gzip</command>, <command>bzip2</command> or " -"<command>lzma</command> as well as <filename>Release</filename> and " -"<filename>md5sum.txt</filename> files by default (<literal>APT::FTPArchive::" -"Release::Default-Patterns</literal>). Additional filename patterns can be " -"added by listing them in <literal>APT::FTPArchive::Release::Patterns</" -"literal>. It then writes to stdout a <filename>Release</filename> file " -"containing (by default) an MD5, SHA1, SHA256 and SHA512 digest for each file." +"and compressed <filename>Packages</filename>, <filename>Sources</filename>, " +"<filename>Contents</filename>, <filename>Components</filename> and " +"<filename>icons</filename> files as well as <filename>Release</filename>, " +"<filename>Index</filename> and <filename>md5sum.txt</filename> files by " +"default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). " +"Additional filename patterns can be added by listing them in <literal>APT::" +"FTPArchive::Release::Patterns</literal>. It then writes to stdout a " +"<filename>Release</filename> file containing (by default) an MD5, SHA1, " +"SHA256 and SHA512 digest for each file." msgstr "" "La orden <literal>release</literal> genera un fichero «Release» a partir de " "un árbol de directorios. Analiza el directorio dado de forma recursiva en " @@ -8709,15 +8700,25 @@ msgstr "" #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml +#, fuzzy +#| msgid "" +#| "Values for the additional metadata fields in the Release file are taken " +#| "from the corresponding variables under <literal>APT::FTPArchive::Release</" +#| "literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The " +#| "supported fields are: <literal>Origin</literal>, <literal>Label</" +#| "literal>, <literal>Suite</literal>, <literal>Version</literal>, " +#| "<literal>Codename</literal>, <literal>Date</literal>, <literal>Valid-" +#| "Until</literal>, <literal>Architectures</literal>, <literal>Components</" +#| "literal>, <literal>Description</literal>." msgid "" "Values for the additional metadata fields in the Release file are taken from " "the corresponding variables under <literal>APT::FTPArchive::Release</" -"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The " -"supported fields are: <literal>Origin</literal>, <literal>Label</literal>, " +"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The " +"supported fields are <literal>Origin</literal>, <literal>Label</literal>, " "<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</" "literal>, <literal>Date</literal>, <literal>Valid-Until</literal>, " -"<literal>Architectures</literal>, <literal>Components</literal>, " -"<literal>Description</literal>." +"<literal>Signed-By</literal>, <literal>Architectures</literal>, " +"<literal>Components</literal> and <literal>Description</literal>." msgstr "" "Los valores para los campos de metadatos adicionales en el fichero «Release» " "se toman de las variables correspondientes en <literal>APT::FTPArchive::" @@ -8851,11 +8852,17 @@ msgstr "" #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para> #: apt-ftparchive.1.xml +#, fuzzy +#| msgid "" +#| "Sets the default compression schemes to use for the package index files. " +#| "It is a string that contains a space separated list of at least one of: " +#| "'.' (no compression), 'gzip' and 'bzip2'. The default for all compression " +#| "schemes is '. gzip'." msgid "" "Sets the default compression schemes to use for the package index files. It " -"is a string that contains a space separated list of at least one of: '.' (no " -"compression), 'gzip' and 'bzip2'. The default for all compression schemes is " -"'. gzip'." +"is a string that contains a space separated list of at least one of the " +"compressors configured via the <option>APT::Compressor</option> " +"configuration scope. The default for all compression schemes is '. gzip'." msgstr "" "Define los esquemas de compresión predeterminados para usar en los ficheros " "de índice de paquete. Es una cadena que contiene una lista separada por " @@ -11153,6 +11160,204 @@ msgstr " # apt-get -o dir::cache::archives=\"/disc/\" dist-upgrade\n" msgid "Which will use the already fetched archives on the disc." msgstr "Esto utiliza los archivos del disco previamente obtenidos." +#~ msgid "dpkg trigger usage (and related options)" +#~ msgstr "Uso del disparador de dpkg (y de las opciones relacionadas)" + +#~ msgid "" +#~ "APT can call &dpkg; in such a way as to let it make aggressive use of " +#~ "triggers over multiple calls of &dpkg;. Without further options &dpkg; " +#~ "will use triggers once each time it runs. Activating these options can " +#~ "therefore decrease the time needed to perform the install or upgrade. " +#~ "Note that it is intended to activate these options per default in the " +#~ "future, but as it drastically changes the way APT calls &dpkg; it needs a " +#~ "lot more testing. <emphasis>These options are therefore currently " +#~ "experimental and should not be used in production environments.</" +#~ "emphasis> It also breaks progress reporting such that all front-ends will " +#~ "currently stay around half (or more) of the time in the 100% state while " +#~ "it actually configures all packages." +#~ msgstr "" +#~ "APT puede invocar &dpkg; de forma que pueda hacer un uso agresivo de los " +#~ "disparadores («triggers») mediante varias invocaciones a &dpkg;. Sin no " +#~ "se definen más opciones, &dpkg; utilizará los disparadores una durante su " +#~ "ejecución. Si se activan estas opciones, se puede reducir el tiempo " +#~ "necesario para realizar la instalación o la actualización. Tenga en " +#~ "cuenta que está diseñado para que estas opciones se activen de forma " +#~ "predeterminada en un futuro, pero debido a los cambios drásticos en la " +#~ "manera en que APT invoca a &dpkg;, necesita más pruebas. " +#~ "<emphasis>Actualmente, estas opciones son experimentales, y no se " +#~ "deberían usar en entornos de producción.</emphasis> También provoca un " +#~ "fallo en el informe de progreso, con lo que todas las interfaces muestran " +#~ "un progreso del 100% durante la mitad del tiempo (o más) durante la " +#~ "configuración de todos los paquetes." + +#~ msgid "" +#~ "DPkg::NoTriggers \"true\";\n" +#~ "PackageManager::Configure \"smart\";\n" +#~ "DPkg::ConfigurePending \"true\";\n" +#~ "DPkg::TriggersPending \"true\";" +#~ msgstr "" +#~ "DPkg::NoTriggers \"true\";\n" +#~ "PackageManager::Configure \"smart\";\n" +#~ "DPkg::ConfigurePending \"true\";\n" +#~ "DPkg::TriggersPending \"true\";" + +#~ msgid "" +#~ "Note that it is not guaranteed that APT will support these options or " +#~ "that these options will not cause (big) trouble in the future. If you " +#~ "have understand the current risks and problems with these options, but " +#~ "are brave enough to help testing them, create a new configuration file " +#~ "and test a combination of options. Please report any bugs, problems and " +#~ "improvements you encounter and make sure to note which options you have " +#~ "used in your reports. Asking &dpkg; for help could also be useful for " +#~ "debugging proposes, see e.g. <command>dpkg --audit</command>. A defensive " +#~ "option combination would be <placeholder type=\"literallayout\" id=\"0\"/>" +#~ msgstr "" +#~ "Tenga en cuenta que no se garantiza que APT permitirá usar estas opciones " +#~ "o que estas opciones no causen un (gran) problema en el futuro. Si ha " +#~ "entendido los riesgos y los problemas actuales con estas opciones pero es " +#~ "lo suficientemente valiente para ayudar a probarlas, cree un nuevo " +#~ "fichero de configuración y pruebe una combinación de las opciones. Por " +#~ "favor, informe de cualquier error, problema o mejora que encuentre y " +#~ "asegúrese de apuntar en sus informes qué opciones ha usado. Pedir ayuda a " +#~ "&dpkg; también puede ser útil por motivos de depuración, véase por " +#~ "ejemplo: <command>dpkg --audit</command>. Una combinación de opciones " +#~ "defensivas sería <placeholder type=\"literallayout\" id=\"0\"/>" + +#~ msgid "" +#~ "Add the no triggers flag to all &dpkg; calls (except the ConfigurePending " +#~ "call). See &dpkg; if you are interested in what this actually means. In " +#~ "short: &dpkg; will not run the triggers when this flag is present unless " +#~ "it is explicitly called to do so in an extra call. Note that this option " +#~ "exists (undocumented) also in older APT versions with a slightly " +#~ "different meaning: Previously these option only append --no-triggers to " +#~ "the configure calls to &dpkg; - now APT will also add this flag to the " +#~ "unpack and remove calls." +#~ msgstr "" +#~ "Añade a todas las invocaciones a &dpkg; la opción sin disparadores («no " +#~ "triggers»), excepto a la invocación a «ConfigurePending». Consulte &dpkg; " +#~ "si está interesado en saber qué significa esto. De forma breve: &dpkg; no " +#~ "ejecuta los disparadores cuando está opción está presente a menos que se " +#~ "ejecute explícitamente con una invocación adicional. Tenga en cuenta que " +#~ "esta opción también existe en versiones antiguas de APT (aunque sin " +#~ "documentar) con un significado diferente. Anteriormente sólo se añadía la " +#~ "opción «--no-triggers» a las invocaciones de la configuración para " +#~ "&dpkg;, ahora APT también añade esta opción a las invocaciones de " +#~ "desempaquetado y eliminación." + +#~ msgid "" +#~ "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" " +#~ "and \"<literal>no</literal>\". The default value is \"<literal>all</" +#~ "literal>\", which causes APT to configure all packages. The " +#~ "\"<literal>smart</literal>\" way is to configure only packages which need " +#~ "to be configured before another package can be unpacked (Pre-Depends), " +#~ "and let the rest be configured by &dpkg; with a call generated by the " +#~ "ConfigurePending option (see below). On the other hand, \"<literal>no</" +#~ "literal>\" will not configure anything, and totally relies on &dpkg; for " +#~ "configuration (which at the moment will fail if a Pre-Depends is " +#~ "encountered). Setting this option to any value other than <literal>all</" +#~ "literal> will implicitly also activate the next option by default, as " +#~ "otherwise the system could end in an unconfigured and potentially " +#~ "unbootable state." +#~ msgstr "" +#~ "Los valores válidos son «<literal>all</literal>», «<literal>smart</" +#~ "literal>» y «<literal>no</literal>». El valor predeterminado es " +#~ "«<literal>all</literal>», que hace que APT configure todos los paquetes. " +#~ "El valor «<literal>smart</literal>» sólo configura los paquetes que " +#~ "requieren ser configurados antes de que se desempaquete otro paquete " +#~ "(predependencia) y permite que &dpkg; configure los restantes con una " +#~ "invocación generada por la opción «ConfigurePending» (más abajo). El " +#~ "valor «<literal>no</literal>» no configura nada y depende por completo de " +#~ "&dpkg; para la configuración (que fallará si se encuentra una pre-" +#~ "dependencia). Si se define esta opción con un valor distinto a " +#~ "«<literal>all</literal>» activa implícitamente la siguiente opción de " +#~ "forma predeterminada, ya que de otro modo el sistema podría terminar en " +#~ "un estado mal configurado qué podría derivar en la imposibilidad de " +#~ "arrancar el sistema. " + +#~ msgid "" +#~ "Useful for the <literal>smart</literal> configuration as a package which " +#~ "has pending triggers is not considered as <literal>installed</literal>, " +#~ "and &dpkg; treats them as <literal>unpacked</literal> currently which is " +#~ "a showstopper for Pre-Dependencies (see debbugs #526774). Note that this " +#~ "will process all triggers, not only the triggers needed to configure this " +#~ "package." +#~ msgstr "" +#~ "Útil para una configuración <literal>smart</literal> en la que un paquete " +#~ "que tiene disparadores pendientes no se considera como " +#~ "<literal>instalado</literal> y que dpkg lo trata como " +#~ "<literal>desempaquetado</literal>, lo cual entra en conflicto con el " +#~ "sistema de pre-dependencias (véase debbugs #526774). Tenga en cuenta que " +#~ "esto procesará todos los disparadores, no sólo los disparadores " +#~ "necesarios para configurar este paquete." + +#~ msgid "" +#~ "OrderList::Score {\n" +#~ "\tDelete 500;\n" +#~ "\tEssential 200;\n" +#~ "\tImmediate 10;\n" +#~ "\tPreDepends 50;\n" +#~ "};" +#~ msgstr "" +#~ "OrderList::Score {\n" +#~ "\tDelete 500;\n" +#~ "\tEssential 200;\n" +#~ "\tImmediate 10;\n" +#~ "\tPreDepends 50;\n" +#~ "};" + +#~ msgid "" +#~ "Essential packages (and their dependencies) should be configured " +#~ "immediately after unpacking. It is a good idea to do this quite early in " +#~ "the upgrade process as these configure calls also currently require " +#~ "<literal>DPkg::TriggersPending</literal> which will run quite a few " +#~ "triggers (which may not be needed). Essentials get per default a high " +#~ "score but the immediate flag is relatively low (a package which has a Pre-" +#~ "Depends is rated higher). These option and the others in the same group " +#~ "can be used to change the scoring. The following example shows the " +#~ "settings with their default values. <placeholder type=\"literallayout\" " +#~ "id=\"0\"/>" +#~ msgstr "" +#~ "Los paquetes esenciales (y sus dependencias) se deberían configurar " +#~ "inmediatamente después de desempaquetarlos. Se recomienda realizarlo lo " +#~ "más pronto posible en el proceso de actualización ya que actualmente " +#~ "estas invocaciones de configuración también necesitan <literal>DPkg::" +#~ "TriggersPending</literal>, que ejecuta varios disparadores (que puede que " +#~ "no sean necesarios). Los esenciales tienen, de forma predeterminada, una " +#~ "puntuación alta pero la opción inmediata es relativamente baja (un " +#~ "paquete que tenga pre-dependencias tiene una puntuación más alta). Puede " +#~ "cambiar la puntuación mediante esta opción y las otras del mismo grupo. " +#~ "El siguiente ejemplo muestra la configuración con los valores " +#~ "predeterminados. <placeholder type=\"literallayout\" id=\"0\"/>" + +#~ msgid "List fingerprints of trusted keys." +#~ msgstr "Lista las huellas digitales de las claves de confianza." + +#~ msgid "<filename>/etc/apt/trustdb.gpg</filename>" +#~ msgstr "<filename>/etc/apt/trustdb.gpg</filename>" + +#~ msgid "Local trust database of archive keys." +#~ msgstr "Base de datos local de las claves de confianza de archivos Debian" + +#~ msgid "&keyring-filename;" +#~ msgstr "&keyring-filename;" + +#~ msgid "Keyring of &keyring-distro; archive trusted keys." +#~ msgstr "" +#~ "Registro de las claves de confianza del archivo de &keyring-distro;." + +#~ msgid "&keyring-removed-filename;" +#~ msgstr "&keyring-removed-filename;" + +#~ msgid "Keyring of &keyring-distro; archive removed trusted keys." +#~ msgstr "" +#~ "Registro de las claves de confianza eliminadas del archivo de &keyring-" +#~ "distro;." + +#, fuzzy +#~| msgid "&apt-cache; &apt-conf;" +#~ msgid "&apt-get;, &apt-conf;" +#~ msgstr "&apt-cache; &apt-conf;" + #~ msgid "" #~ "This is a space separated list of all the architectures that appear under " #~ "search section. The special architecture 'source' is used to indicate "