X-Git-Url: https://git.saurik.com/apt.git/blobdiff_plain/070536e61cb203a9c74013be2a26322b582a9674..05f64ca2e483709faa6bc69dfa79129d2d4c679e:/apt-pkg/packagemanager.cc diff --git a/apt-pkg/packagemanager.cc b/apt-pkg/packagemanager.cc index 0ec9f3309..d137dc75a 100644 --- a/apt-pkg/packagemanager.cc +++ b/apt-pkg/packagemanager.cc @@ -262,7 +262,7 @@ bool pkgPackageManager::CheckRConflicts(PkgIterator Pkg,DepIterator D, if (Cache.VS().CheckDep(Ver,D->CompareOp,D.TargetVer()) == false) continue; - if (EarlyRemove(D.ParentPkg()) == false) + if (EarlyRemove(D.ParentPkg(), &D) == false) return _error->Error("Reverse conflicts early remove for package '%s' failed", Pkg.FullName().c_str()); } @@ -314,18 +314,41 @@ bool pkgPackageManager::ConfigureAll() return true; } /*}}}*/ +// PM::NonLoopingSmart - helper to avoid loops while calling Smart methods /*{{{*/ +// ----------------------------------------------------------------------- +/* ensures that a loop of the form A depends B, B depends A (and similar) + is not leading us down into infinite recursion segfault land */ +bool pkgPackageManager::NonLoopingSmart(SmartAction const action, pkgCache::PkgIterator &Pkg, + pkgCache::PkgIterator DepPkg, int const Depth, bool const PkgLoop, + bool * const Bad, bool * const Changed) +{ + if (PkgLoop == false) + List->Flag(Pkg,pkgOrderList::Loop); + bool success = false; + switch(action) + { + case UNPACK_IMMEDIATE: success = SmartUnPack(DepPkg, true, Depth + 1); break; + case UNPACK: success = SmartUnPack(DepPkg, false, Depth + 1); break; + case CONFIGURE: success = SmartConfigure(DepPkg, Depth + 1); break; + } + if (PkgLoop == false) + List->RmFlag(Pkg,pkgOrderList::Loop); + + if (success == false) + return false; + + if (Bad != NULL) + *Bad = false; + if (Changed != NULL && List->IsFlag(DepPkg,pkgOrderList::Loop) == false) + *Changed = true; + return true; +} + /*}}}*/ // PM::SmartConfigure - Perform immediate configuration of the pkg /*{{{*/ // --------------------------------------------------------------------- /* This function tries to put the system in a state where Pkg can be configured. - This involves checking each of Pkg's dependanies and unpacking and - configuring packages where needed. - - Note on failure: This method can fail, without causing any problems. - This can happen when using Immediate-Configure-All, SmartUnPack may call - SmartConfigure, it may fail because of a complex dependency situation, but - a error will only be reported if ConfigureAll fails. This is why some of the - messages this function reports on failure (return false;) as just warnings - only shown when debuging*/ + This involves checking each of Pkg's dependencies and unpacking and + configuring packages where needed. */ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) { // If this is true, only check and correct and dependencies without the Loop flag @@ -340,9 +363,9 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) } VerIterator const instVer = Cache[Pkg].InstVerIter(Cache); - - /* Because of the ordered list, most dependencies should be unpacked, - however if there is a loop (A depends on B, B depends on A) this will not + + /* Because of the ordered list, most dependencies should be unpacked, + however if there is a loop (A depends on B, B depends on A) this will not be the case, so check for dependencies before configuring. */ bool Bad = false, Changed = false; const unsigned int max_loops = _config->FindI("APT::pkgPackageManager::MaxLoopCount", 5000); @@ -350,6 +373,8 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) std::list needConfigure; do { + // Check each dependency and see if anything needs to be done + // so that it can be configured Changed = false; for (DepIterator D = instVer.DependsList(); D.end() == false; ) { @@ -361,7 +386,8 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) continue; Bad = true; - // Check for dependencies that have not been unpacked, probably due to loops. + // the first pass checks if we its all good, i.e. if we have + // to do anything at all for (DepIterator Cur = Start; true; ++Cur) { SPtrArray VList = Cur.AllTargets(); @@ -374,7 +400,8 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) // Check if the current version of the package is available and will satisfy this dependency if (DepPkg.CurrentVer() == Ver && List->IsNow(DepPkg) == true && List->IsFlag(DepPkg,pkgOrderList::Removed) == false && - DepPkg.State() == PkgIterator::NeedsNothing) + DepPkg.State() == PkgIterator::NeedsNothing && + (Cache[DepPkg].iFlags & pkgDepCache::ReInstall) != pkgDepCache::ReInstall) { Bad = false; break; @@ -387,27 +414,71 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) if (PkgLoop == true) { if (Debug) - std::clog << OutputInDepth(Depth) << "Package " << Pkg << " loops in SmartConfigure" << std::endl; - Bad = false; - break; + std::clog << OutputInDepth(Depth) << "Package " << Pkg << " loops in SmartConfigure"; + if (List->IsFlag(DepPkg,pkgOrderList::UnPacked)) + Bad = false; + else if (Debug) + std::clog << ", but it isn't unpacked yet"; + if (Debug) + std::clog << std::endl; + } + } + + if (Cur == End || Bad == false) + break; + } + + // this dependency is in a good state, so we can stop + if (Bad == false) + { + if (Debug) + std::clog << OutputInDepth(Depth) << "Found ok dep " << Start.TargetPkg() << std::endl; + continue; + } + + // Check for dependencies that have not been unpacked, + // probably due to loops. + for (DepIterator Cur = Start; true; ++Cur) + { + SPtrArray VList = Cur.AllTargets(); + + for (Version **I = VList; *I != 0; ++I) + { + VerIterator Ver(Cache,*I); + PkgIterator DepPkg = Ver.ParentPkg(); + + // Check if the current version of the package is available and will satisfy this dependency + if (DepPkg.CurrentVer() == Ver && List->IsNow(DepPkg) == true && + List->IsFlag(DepPkg,pkgOrderList::Removed) == false && + DepPkg.State() == PkgIterator::NeedsNothing && + (Cache[DepPkg].iFlags & pkgDepCache::ReInstall) != pkgDepCache::ReInstall) + continue; + + // Check if the version that is going to be installed will satisfy the dependency + if (Cache[DepPkg].InstallVer != *I || List->IsNow(DepPkg) == false) + continue; + + if (PkgLoop == true) + { + if (Debug) + std::clog << OutputInDepth(Depth) << "Package " << Pkg << " loops in SmartConfigure"; + if (List->IsFlag(DepPkg,pkgOrderList::UnPacked)) + Bad = false; + else if (Debug) + std::clog << ", but it isn't unpacked yet"; + if (Debug) + std::clog << std::endl; } else { if (Debug) clog << OutputInDepth(Depth) << "Unpacking " << DepPkg.FullName() << " to avoid loop " << Cur << endl; - if (PkgLoop == false) - List->Flag(Pkg,pkgOrderList::Loop); - if (SmartUnPack(DepPkg, true, Depth + 1) == true) - { - Bad = false; - if (List->IsFlag(DepPkg,pkgOrderList::Loop) == false) - Changed = true; - } - if (PkgLoop == false) - List->RmFlag(Pkg,pkgOrderList::Loop); - if (Bad == false) - break; + if (NonLoopingSmart(UNPACK_IMMEDIATE, Pkg, DepPkg, Depth, PkgLoop, &Bad, &Changed) == false) + return false; } + // at this point we either unpacked a Dep or we are in a loop, + // no need to unpack a second one + break; } if (Cur == End || Bad == false) @@ -423,6 +494,7 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) return _error->Error("Internal error: MaxLoopCount reached in SmartUnPack (1) for %s, aborting", Pkg.FullName().c_str()); } while (Changed == true); + // now go over anything that needs configuring Bad = false, Changed = false, i = 0; do { @@ -462,25 +534,12 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) Bad = false; break; } - /* Check for a loop to prevent one forming - If A depends on B and B depends on A, SmartConfigure will - just hop between them if this is not checked. Dont remove the - loop flag after finishing however as loop is already set. - This means that there is another SmartConfigure call for this - package and it will remove the loop flag */ - if (PkgLoop == false) - List->Flag(Pkg,pkgOrderList::Loop); - if (SmartConfigure(DepPkg, Depth + 1) == true) - { - Bad = false; - if (List->IsFlag(DepPkg,pkgOrderList::Loop) == false) - Changed = true; - } - if (PkgLoop == false) - List->RmFlag(Pkg,pkgOrderList::Loop); - // If SmartConfigure was succesfull, Bad is false, so break - if (Bad == false) - break; + if (Debug) + std::clog << OutputInDepth(Depth) << "Configure already unpacked " << DepPkg << std::endl; + if (NonLoopingSmart(CONFIGURE, Pkg, DepPkg, Depth, PkgLoop, &Bad, &Changed) == false) + return false; + break; + } else if (List->IsFlag(DepPkg,pkgOrderList::Configured)) { @@ -499,19 +558,16 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) if (i++ > max_loops) return _error->Error("Internal error: MaxLoopCount reached in SmartUnPack (2) for %s, aborting", Pkg.FullName().c_str()); } while (Changed == true); - - if (Bad) { - if (Debug) - _error->Warning(_("Could not configure '%s'. "),Pkg.FullName().c_str()); - return false; - } - + + if (Bad == true) + return _error->Error(_("Could not configure '%s'. "),Pkg.FullName().c_str()); + if (PkgLoop) return true; static std::string const conf = _config->Find("PackageManager::Configure","all"); static bool const ConfigurePkgs = (conf == "all" || conf == "smart"); - if (List->IsFlag(Pkg,pkgOrderList::Configured)) + if (List->IsFlag(Pkg,pkgOrderList::Configured)) return _error->Error("Internal configure error on '%s'.", Pkg.FullName().c_str()); if (ConfigurePkgs == true && Configure(Pkg) == false) @@ -528,7 +584,8 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) Cache[P].InstallVer == 0 || (P.CurrentVer() == Cache[P].InstallVer && (Cache[Pkg].iFlags & pkgDepCache::ReInstall) != pkgDepCache::ReInstall)) continue; - SmartConfigure(P, (Depth +1)); + if (SmartConfigure(P, (Depth +1)) == false) + return false; } // Sanity Check @@ -542,29 +599,37 @@ bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth) // --------------------------------------------------------------------- /* This is called to deal with conflicts arising from unpacking */ bool pkgPackageManager::EarlyRemove(PkgIterator Pkg) +{ + return EarlyRemove(Pkg, NULL); +} +bool pkgPackageManager::EarlyRemove(PkgIterator Pkg, DepIterator const * const Dep) { if (List->IsNow(Pkg) == false) return true; - + // Already removed it if (List->IsFlag(Pkg,pkgOrderList::Removed) == true) return true; - + // Woops, it will not be re-installed! if (List->IsFlag(Pkg,pkgOrderList::InList) == false) return false; + // these breaks on M-A:same packages can be dealt with. They 'loop' by design + if (Dep != NULL && (*Dep)->Type == pkgCache::Dep::DpkgBreaks && Dep->IsMultiArchImplicit() == true) + return true; + // Essential packages get special treatment bool IsEssential = false; if ((Pkg->Flags & pkgCache::Flag::Essential) != 0 || (Pkg->Flags & pkgCache::Flag::Important) != 0) IsEssential = true; - /* Check for packages that are the dependents of essential packages and + /* Check for packages that are the dependents of essential packages and promote them too */ if (Pkg->CurrentVer != 0) { - for (DepIterator D = Pkg.RevDependsList(); D.end() == false && + for (pkgCache::DepIterator D = Pkg.RevDependsList(); D.end() == false && IsEssential == false; ++D) if (D->Type == pkgCache::Dep::Depends || D->Type == pkgCache::Dep::PreDepends) if ((D.ParentPkg()->Flags & pkgCache::Flag::Essential) != 0 || @@ -581,11 +646,14 @@ bool pkgPackageManager::EarlyRemove(PkgIterator Pkg) "but if you really want to do it, activate the " "APT::Force-LoopBreak option."),Pkg.FullName().c_str()); } - + // dpkg will auto-deconfigure it, no need for the big remove hammer + else if (Dep != NULL && (*Dep)->Type == pkgCache::Dep::DpkgBreaks) + return true; + bool Res = SmartRemove(Pkg); if (Cache[Pkg].Delete() == false) List->Flag(Pkg,pkgOrderList::Removed,pkgOrderList::States); - + return Res; } /*}}}*/ @@ -630,13 +698,14 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate, int c VerIterator const instVer = Cache[Pkg].InstVerIter(Cache); - /* PreUnpack Checks: This loop checks and attempts to rectify and problems that would prevent the package being unpacked. + /* PreUnpack Checks: This loop checks and attempts to rectify any problems that would prevent the package being unpacked. It addresses: PreDepends, Conflicts, Obsoletes and Breaks (DpkgBreaks). Any resolutions that do not require it should avoid configuration (calling SmartUnpack with Immediate=true), this is because when unpacking some packages with - complex dependency structures, trying to configure some packages while breaking the loops can complicate things . + complex dependency structures, trying to configure some packages while breaking the loops can complicate things. This will be either dealt with if the package is configured as a dependency of Pkg (if and when Pkg is configured), or by the ConfigureAll call at the end of the for loop in OrderInstall. */ - bool Changed = false; + bool SomethingBad = false, Changed = false; + bool couldBeTemporaryRemoved = Depth != 0 && List->IsFlag(Pkg,pkgOrderList::Removed) == false; const unsigned int max_loops = _config->FindI("APT::pkgPackageManager::MaxLoopCount", 5000); unsigned int i = 0; do @@ -665,7 +734,8 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate, int c // See if the current version is ok if (Pkg.CurrentVer() == Ver && List->IsNow(Pkg) == true && - Pkg.State() == PkgIterator::NeedsNothing) + Pkg.State() == PkgIterator::NeedsNothing && + (Cache[Pkg].iFlags & pkgDepCache::ReInstall) != pkgDepCache::ReInstall) { Bad = false; if (Debug) @@ -684,184 +754,155 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate, int c for (Version **I = VList; *I != 0; ++I) { VerIterator Ver(Cache,*I); - PkgIterator Pkg = Ver.ParentPkg(); + PkgIterator DepPkg = Ver.ParentPkg(); // Not the install version - if (Cache[Pkg].InstallVer != *I || - (Cache[Pkg].Keep() == true && Pkg.State() == PkgIterator::NeedsNothing)) + if (Cache[DepPkg].InstallVer != *I) + continue; + + if (Cache[DepPkg].Keep() == true && DepPkg.State() == PkgIterator::NeedsNothing && + (Cache[DepPkg].iFlags & pkgDepCache::ReInstall) != pkgDepCache::ReInstall) continue; - if (List->IsFlag(Pkg,pkgOrderList::Configured)) + if (List->IsFlag(DepPkg,pkgOrderList::Configured)) { Bad = false; break; } // check if it needs unpack or if if configure is enough - if (List->IsFlag(Pkg,pkgOrderList::UnPacked) == false) + if (List->IsFlag(DepPkg,pkgOrderList::UnPacked) == false) { - if (Debug) - clog << OutputInDepth(Depth) << "Trying to SmartUnpack " << Pkg.FullName() << endl; - // SmartUnpack with the ImmediateFlag to ensure its really ready - if (SmartUnPack(Pkg, true, Depth + 1) == true) + // two packages pre-depending on each other can't be handled sanely + if (List->IsFlag(DepPkg,pkgOrderList::Loop) && PkgLoop) { - Bad = false; - if (List->IsFlag(Pkg,pkgOrderList::Loop) == false) - Changed = true; - break; + // this isn't an error as there is potential for something else to satisfy it + // (like a provides or an or-group member) + if (Debug) + clog << OutputInDepth(Depth) << "Unpack loop detected between " << DepPkg.FullName() << " and " << Pkg.FullName() << endl; + continue; } + + if (Debug) + clog << OutputInDepth(Depth) << "Trying to SmartUnpack " << DepPkg.FullName() << endl; + if (NonLoopingSmart(UNPACK_IMMEDIATE, Pkg, DepPkg, Depth, PkgLoop, &Bad, &Changed) == false) + return false; } else { if (Debug) - clog << OutputInDepth(Depth) << "Trying to SmartConfigure " << Pkg.FullName() << endl; - if (SmartConfigure(Pkg, Depth + 1) == true) - { - Bad = false; - if (List->IsFlag(Pkg,pkgOrderList::Loop) == false) - Changed = true; - break; - } + clog << OutputInDepth(Depth) << "Trying to SmartConfigure " << DepPkg.FullName() << endl; + if (NonLoopingSmart(CONFIGURE, Pkg, DepPkg, Depth, PkgLoop, &Bad, &Changed) == false) + return false; } + break; } } if (Bad == true) - { - if (Start == End) - return _error->Error("Couldn't configure pre-depend %s for %s, " - "probably a dependency cycle.", - End.TargetPkg().FullName().c_str(),Pkg.FullName().c_str()); - } - else - continue; + SomethingBad = true; } else if (End->Type == pkgCache::Dep::Conflicts || - End->Type == pkgCache::Dep::Obsoletes) + End->Type == pkgCache::Dep::Obsoletes || + End->Type == pkgCache::Dep::DpkgBreaks) { - /* Look for conflicts. Two packages that are both in the install - state cannot conflict so we don't check.. */ SPtrArray VList = End.AllTargets(); - for (Version **I = VList; *I != 0; I++) + for (Version **I = VList; *I != 0; ++I) { VerIterator Ver(Cache,*I); PkgIterator ConflictPkg = Ver.ParentPkg(); - VerIterator InstallVer(Cache,Cache[ConflictPkg].InstallVer); + if (ConflictPkg.CurrentVer() != Ver) + { + if (Debug) + std::clog << OutputInDepth(Depth) << "Ignore not-installed version " << Ver.VerStr() << " of " << ConflictPkg.FullName() << " for " << End << std::endl; + continue; + } - // See if the current version is conflicting - if (ConflictPkg.CurrentVer() == Ver && List->IsNow(ConflictPkg)) + if (List->IsNow(ConflictPkg) == false) { if (Debug) - clog << OutputInDepth(Depth) << Pkg.FullName() << " conflicts with " << ConflictPkg.FullName() << endl; - /* If a loop is not present or has not yet been detected, attempt to unpack packages - to resolve this conflict. If there is a loop present, remove packages to resolve this conflict */ - if (List->IsFlag(ConflictPkg,pkgOrderList::Loop) == false) - { - if (Cache[ConflictPkg].Keep() == 0 && Cache[ConflictPkg].InstallVer != 0) - { - if (Debug) - clog << OutputInDepth(Depth) << OutputInDepth(Depth) << "Unpacking " << ConflictPkg.FullName() << " to prevent conflict" << endl; - List->Flag(Pkg,pkgOrderList::Loop); - if (SmartUnPack(ConflictPkg,false, Depth + 1) == true) - if (List->IsFlag(ConflictPkg,pkgOrderList::Loop) == false) - Changed = true; - // Remove loop to allow it to be used later if needed - List->RmFlag(Pkg,pkgOrderList::Loop); - } - else if (EarlyRemove(ConflictPkg) == false) - return _error->Error("Internal Error, Could not early remove %s (1)",ConflictPkg.FullName().c_str()); - } - else if (List->IsFlag(ConflictPkg,pkgOrderList::Removed) == false) + std::clog << OutputInDepth(Depth) << "Ignore already dealt-with version " << Ver.VerStr() << " of " << ConflictPkg.FullName() << " for " << End << std::endl; + continue; + } + + if (List->IsFlag(ConflictPkg,pkgOrderList::Removed) == true) + { + if (Debug) + clog << OutputInDepth(Depth) << "Ignoring " << End << " as " << ConflictPkg.FullName() << "was temporarily removed" << endl; + continue; + } + + if (List->IsFlag(ConflictPkg,pkgOrderList::Loop) && PkgLoop) + { + if (End->Type == pkgCache::Dep::DpkgBreaks && End.IsMultiArchImplicit() == true) { if (Debug) - clog << OutputInDepth(Depth) << "Because of conficts knot, removing " << ConflictPkg.FullName() << " to conflict violation" << endl; - if (EarlyRemove(ConflictPkg) == false) - return _error->Error("Internal Error, Could not early remove %s (2)",ConflictPkg.FullName().c_str()); + clog << OutputInDepth(Depth) << "Because dependency is MultiArchImplicit we ignored looping on: " << ConflictPkg << endl; + continue; } - } - } - } - else if (End->Type == pkgCache::Dep::DpkgBreaks) - { - SPtrArray VList = End.AllTargets(); - for (Version **I = VList; *I != 0; ++I) - { - VerIterator Ver(Cache,*I); - PkgIterator BrokenPkg = Ver.ParentPkg(); - if (BrokenPkg.CurrentVer() != Ver) - { if (Debug) - std::clog << OutputInDepth(Depth) << " Ignore not-installed version " << Ver.VerStr() << " of " << Pkg.FullName() << " for " << End << std::endl; + { + if (End->Type == pkgCache::Dep::DpkgBreaks) + clog << OutputInDepth(Depth) << "Because of breaks knot, deconfigure " << ConflictPkg.FullName() << " temporarily" << endl; + else + clog << OutputInDepth(Depth) << "Because of conflict knot, removing " << ConflictPkg.FullName() << " temporarily" << endl; + } + if (EarlyRemove(ConflictPkg, &End) == false) + return _error->Error("Internal Error, Could not early remove %s (2)",ConflictPkg.FullName().c_str()); + SomethingBad = true; continue; } - // Check if it needs to be unpacked - if (List->IsFlag(BrokenPkg,pkgOrderList::InList) && Cache[BrokenPkg].Delete() == false && - List->IsNow(BrokenPkg)) + if (Cache[ConflictPkg].Delete() == false) { - if (List->IsFlag(BrokenPkg,pkgOrderList::Loop) && PkgLoop) + if (Debug) { - // This dependency has already been dealt with by another SmartUnPack on Pkg - break; + clog << OutputInDepth(Depth) << "Unpacking " << ConflictPkg.FullName() << " to avoid " << End; + if (PkgLoop == true) + clog << " (Looping)"; + clog << std::endl; } - else + // we would like to avoid temporary removals and all that at best via a simple unpack + _error->PushToStack(); + if (NonLoopingSmart(UNPACK, Pkg, ConflictPkg, Depth, PkgLoop, NULL, &Changed) == false) { - // Found a break, so see if we can unpack the package to avoid it - // but do not set loop if another SmartUnPack already deals with it - // Also, avoid it if the package we would unpack pre-depends on this one - VerIterator InstallVer(Cache,Cache[BrokenPkg].InstallVer); - bool circle = false; - for (pkgCache::DepIterator D = InstallVer.DependsList(); D.end() == false; ++D) + // but if it fails ignore this failure and look for alternative ways of solving + if (Debug) { - if (D->Type != pkgCache::Dep::PreDepends) - continue; - SPtrArray VL = D.AllTargets(); - for (Version **I = VL; *I != 0; ++I) - { - VerIterator V(Cache,*I); - PkgIterator P = V.ParentPkg(); - // we are checking for installation as an easy 'protection' against or-groups and (unchosen) providers - if (P != Pkg || (P.CurrentVer() != V && Cache[P].InstallVer != V)) - continue; - circle = true; - break; - } - if (circle == true) - break; + clog << OutputInDepth(Depth) << "Avoidance unpack of " << ConflictPkg.FullName() << " failed for " << End << " ignoring:" << std::endl; + _error->DumpErrors(std::clog); } - if (circle == true) + _error->RevertToStack(); + // ignorance can only happen if a) one of the offenders is already gone + if (List->IsFlag(ConflictPkg,pkgOrderList::Removed) == true) { if (Debug) - clog << OutputInDepth(Depth) << " Avoiding " << End << " avoided as " << BrokenPkg.FullName() << " has a pre-depends on " << Pkg.FullName() << std::endl; - continue; + clog << OutputInDepth(Depth) << "But " << ConflictPkg.FullName() << " was temporarily removed in the meantime to satisfy " << End << endl; } + else if (List->IsFlag(Pkg,pkgOrderList::Removed) == true) + { + if (Debug) + clog << OutputInDepth(Depth) << "But " << Pkg.FullName() << " was temporarily removed in the meantime to satisfy " << End << endl; + } + // or b) we can make one go (removal or dpkg auto-deconfigure) else { if (Debug) - { - clog << OutputInDepth(Depth) << " Unpacking " << BrokenPkg.FullName() << " to avoid " << End; - if (PkgLoop == true) - clog << " (Looping)"; - clog << std::endl; - } - if (PkgLoop == false) - List->Flag(Pkg,pkgOrderList::Loop); - if (SmartUnPack(BrokenPkg, false, Depth + 1) == true) - { - if (List->IsFlag(BrokenPkg,pkgOrderList::Loop) == false) - Changed = true; - } - if (PkgLoop == false) - List->RmFlag(Pkg,pkgOrderList::Loop); + clog << OutputInDepth(Depth) << "So temprorary remove/deconfigure " << ConflictPkg.FullName() << " to satisfy " << End << endl; + if (EarlyRemove(ConflictPkg, &End) == false) + return _error->Error("Internal Error, Could not early remove %s (2)",ConflictPkg.FullName().c_str()); } } + else + _error->MergeWithStack(); } - // Check if a package needs to be removed - else if (Cache[BrokenPkg].Delete() == true && List->IsFlag(BrokenPkg,pkgOrderList::Configured) == false) + else { if (Debug) - clog << OutputInDepth(Depth) << " Removing " << BrokenPkg.FullName() << " to avoid " << End << endl; - SmartRemove(BrokenPkg); + clog << OutputInDepth(Depth) << "Removing " << ConflictPkg.FullName() << " now to avoid " << End << endl; + // no earlyremove() here as user has already agreed to the permanent removal + if (SmartRemove(Pkg) == false) + return _error->Error("Internal Error, Could not early remove %s (1)",ConflictPkg.FullName().c_str()); } } } @@ -869,7 +910,17 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate, int c if (i++ > max_loops) return _error->Error("Internal error: APT::pkgPackageManager::MaxLoopCount reached in SmartConfigure for %s, aborting", Pkg.FullName().c_str()); } while (Changed == true); - + + if (SomethingBad == true) + return _error->Error("Couldn't configure %s, probably a dependency cycle.", Pkg.FullName().c_str()); + + if (couldBeTemporaryRemoved == true && List->IsFlag(Pkg,pkgOrderList::Removed) == true) + { + if (Debug) + std::clog << OutputInDepth(Depth) << "Prevent unpack as " << Pkg << " is currently temporarily removed" << std::endl; + return true; + } + // Check for reverse conflicts. if (CheckRConflicts(Pkg,Pkg.RevDependsList(), instVer.VerStr()) == false) @@ -930,7 +981,7 @@ bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate, int c if (Immediate == true) { // Perform immedate configuration of the package. if (SmartConfigure(Pkg, Depth + 1) == false) - _error->Warning(_("Could not perform immediate configuration on '%s'. " + _error->Error(_("Could not perform immediate configuration on '%s'. " "Please see man 5 apt.conf under APT::Immediate-Configure for details. (%d)"),Pkg.FullName().c_str(),2); } @@ -1034,7 +1085,7 @@ pkgPackageManager::OrderResult pkgPackageManager::OrderInstall() // PM::DoInstallPostFork - compat /*{{{*/ // --------------------------------------------------------------------- /*}}}*/ -#if (APT_PKG_MAJOR >= 4 && APT_PKG_MINOR >= 13) +#if APT_PKG_ABI >= 413 pkgPackageManager::OrderResult pkgPackageManager::DoInstallPostFork(int statusFd) { @@ -1055,7 +1106,7 @@ pkgPackageManager::DoInstallPostFork(APT::Progress::PackageManager *progress) return Failed; return Res; -}; +} #else pkgPackageManager::OrderResult pkgPackageManager::DoInstallPostFork(int statusFd) @@ -1071,7 +1122,7 @@ pkgPackageManager::DoInstallPostFork(int statusFd) // PM::DoInstall - Does the installation /*{{{*/ // --------------------------------------------------------------------- /* compat */ -#if (APT_PKG_MAJOR >= 4 && APT_PKG_MINOR >= 13) +#if APT_PKG_ABI >= 413 pkgPackageManager::OrderResult pkgPackageManager::DoInstall(int statusFd) { @@ -1095,7 +1146,7 @@ pkgPackageManager::OrderResult pkgPackageManager::DoInstall(int statusFd) // --------------------------------------------------------------------- /* This uses the filenames in FileNames and the information in the DepCache to perform the installation of packages.*/ -#if (APT_PKG_MAJOR >= 4 && APT_PKG_MINOR >= 13) +#if APT_PKG_ABI >= 413 pkgPackageManager::OrderResult pkgPackageManager::DoInstall(APT::Progress::PackageManager *progress) {