+#: apt-inst/extract.cc:289
+msgid "Failed to locate node in its hash bucket"
+msgstr "在雜湊表中找不到節點"
+
+#: apt-inst/extract.cc:293
+msgid "The path is too long"
+msgstr "路徑過長"
+
+#: apt-inst/extract.cc:421
+#, c-format
+msgid "Overwrite package match with no version for %s"
+msgstr "以無版本的 %s 覆寫原始套件"
+
+#: apt-inst/extract.cc:438
+#, c-format
+msgid "File %s/%s overwrites the one in the package %s"
+msgstr "檔案 %s/%s 覆寫了套件 %s 中的相同檔案"
+
+#: apt-inst/extract.cc:498
+#, c-format
+msgid "Unable to stat %s"
+msgstr "無法取得 %s 的狀態"
+
+#: apt-inst/dirstream.cc:42 apt-inst/dirstream.cc:49 apt-inst/dirstream.cc:54
+#, c-format
+msgid "Failed to write file %s"
+msgstr "寫入檔案 %s 失敗"
+
+#: apt-inst/dirstream.cc:104
+#, c-format
+msgid "Failed to close file %s"
+msgstr "關閉檔案 %s 失敗"
+
+#: apt-inst/deb/debfile.cc:47 apt-inst/deb/debfile.cc:54
+#: apt-inst/deb/debfile.cc:63
+#, c-format
+msgid "This is not a valid DEB archive, missing '%s' member"
+msgstr "這是個不正確的 DEB 套件檔，沒有 '%s' 成員"
+
+#: apt-inst/deb/debfile.cc:132
+#, c-format
+msgid "Internal error, could not locate member %s"
+msgstr "內部錯誤，找不找到成員 %s"
+
+#: apt-inst/deb/debfile.cc:231
+msgid "Unparsable control file"
+msgstr "無法分析的 control 檔"
+
+#: apt-inst/contrib/arfile.cc:76
+msgid "Invalid archive signature"
+msgstr "無效的套件庫簽章"
+
+#: apt-inst/contrib/arfile.cc:84
+msgid "Error reading archive member header"
+msgstr "讀取套件檔的成員標頭訊息時發生錯誤"
+
+#: apt-inst/contrib/arfile.cc:96
+#, fuzzy, c-format
+msgid "Invalid archive member header %s"
+msgstr "無效的套件檔成員標頭"
+
+#: apt-inst/contrib/arfile.cc:108
+msgid "Invalid archive member header"
+msgstr "無效的套件檔成員標頭"
+
+#: apt-inst/contrib/arfile.cc:137
+msgid "Archive is too short"
+msgstr "套件檔過短"
+
+#: apt-inst/contrib/arfile.cc:141
+msgid "Failed to read the archive headers"
+msgstr "讀取套件檔標頭失敗"
+
+#: apt-inst/contrib/extracttar.cc:128
+msgid "Failed to create pipes"
+msgstr "無法建立管線"
+
+#: apt-inst/contrib/extracttar.cc:155
+msgid "Failed to exec gzip "
+msgstr "無法執行 gzip"
+
+#: apt-inst/contrib/extracttar.cc:192 apt-inst/contrib/extracttar.cc:222
+msgid "Corrupted archive"
+msgstr "損毀的套件檔"
+
+#: apt-inst/contrib/extracttar.cc:207
+msgid "Tar checksum failed, archive corrupted"
+msgstr "Tar checksum 失敗，套件檔已損毀"
+
+#: apt-inst/contrib/extracttar.cc:312
+#, c-format
+msgid "Unknown TAR header type %u, member %s"
+msgstr "未知的 TAR 標頭類型 %u，成員 %s"
+
+#~ msgid "Total dependency version space: "
+#~ msgstr "相依版本空間合計："
+
+#~ msgid "You don't have enough free space in %s"
+#~ msgstr "在 %s 裡沒有足夠的的未使用空間"
+
+#~ msgid "Done"
+#~ msgstr "完成"
+
+#, fuzzy
+#~ msgid "No keyring installed in %s."
+#~ msgstr "放棄安裝。"
+
+#, fuzzy
+#~ msgid "Internal error, Upgrade broke stuff"
+#~ msgstr "內部錯誤，AllUpgrade 造成了損壞"
+
+#~ msgid "%s not a valid DEB package."
+#~ msgstr "%s 並不是正確的 DEB 套件。"
+
+#~ msgid ""
+#~ "Using CD-ROM mount point %s\n"
+#~ "Mounting CD-ROM\n"
+#~ msgstr ""
+#~ "使用光碟機掛載點 %s\n"
+#~ "正在掛載光碟機\n"
+
+#, fuzzy
+#~ msgid "Note, selecting '%s' for task '%s'\n"
+#~ msgstr "注意，根據正規表示式 '%2$s' 而選擇了 %1$s\n"
+
+#, fuzzy
+#~ msgid "Note, selecting '%s' for regex '%s'\n"
+#~ msgstr "注意，根據正規表示式 '%2$s' 而選擇了 %1$s\n"
+
+#~ msgid "Package %s is a virtual package provided by:\n"
+#~ msgstr "套件 %s 是虛擬套件，提供者為：\n"
+
+#, fuzzy
+#~ msgid " [Not candidate version]"
+#~ msgstr "候選版本"
+
+#~ msgid "You should explicitly select one to install."
+#~ msgstr "請您明確地選擇一個來進行安裝。"
+
+#~ msgid ""
+#~ "Package %s is not available, but is referred to by another package.\n"
+#~ "This may mean that the package is missing, has been obsoleted, or\n"
+#~ "is only available from another source\n"
+#~ msgstr ""
+#~ "無法取得套件 %s，但它卻被其它的套件引用了。\n"
+#~ "這意味著這個套件可能已經消失了、被廢棄了，或是只能由其他的來源取得\n"
+
+#~ msgid "However the following packages replace it:"
+#~ msgstr "然而，下列的套件取代了它："
+
+#, fuzzy
+#~ msgid "Package '%s' has no installation candidate"
+#~ msgstr "套件 %s 沒有可安裝的候選版本"
+
+#, fuzzy
+#~ msgid "Note, selecting '%s' instead of '%s'\n"
+#~ msgstr "注意，選擇了以 %s 替代 %s\n"
+
+#~ msgid "This is not a valid DEB archive, it has no '%s', '%s' or '%s' member"
+#~ msgstr "這是個不正確的 DEB 套件檔，沒有 '%s', '%s' 或 '%s' 成員"
+
+#~ msgid "MD5Sum mismatch"
+#~ msgstr "MD5Sum 不符"
+
+#~ msgid ""
+#~ "I wasn't able to locate a file for the %s package. This might mean you "
+#~ "need to manually fix this package."
+#~ msgstr "找不到 %s 套件的某個檔案。這意味著您可能要手動修復這個套件。"
+
+#~ msgid "Can not write log, openpty() failed (/dev/pts not mounted?)\n"
+#~ msgstr "無法寫入記錄檔，openpty() 失敗（/dev/pts 未掛載？）\n"
+
+#, fuzzy
+#~ msgid "Skipping nonexistent file %s"
+#~ msgstr "開啟設定檔 %s"
+
+#~ msgid "Failed to remove %s"
+#~ msgstr "無法移除 %s"
+
+#~ msgid "Unable to create %s"
+#~ msgstr "無法建立 %s"
+
+#~ msgid "Failed to stat %sinfo"
+#~ msgstr "無法取得 %sinfo 的狀態"
+
+#~ msgid "The info and temp directories need to be on the same filesystem"
+#~ msgstr "資料目錄與暫存目錄需位於同一檔案系統中"
+
+#~ msgid "Failed to change to the admin dir %sinfo"
+#~ msgstr "無法切換至管理者目錄 %sinfo"
+
+#~ msgid "Internal error getting a package name"
+#~ msgstr "內部錯誤，無法取得套件名稱"
+
+#~ msgid "Reading file listing"
+#~ msgstr "正在讀取檔案清單"
+
+#~ msgid ""
+#~ "Failed to open the list file '%sinfo/%s'. If you cannot restore this file "
+#~ "then make it empty and immediately re-install the same version of the "
+#~ "package!"
+#~ msgstr ""
+#~ "無法開啟清單檔 %sinfo/%s。如果您無法將此檔案還原，請清除檔案內容，然後立即"
+#~ "重新安裝同一版本的套件！"
+
+#~ msgid "Failed reading the list file %sinfo/%s"
+#~ msgstr "無法讀取清單檔 %sinfo/%s"
+
+#~ msgid "Internal error getting a node"
+#~ msgstr "內部錯誤，無法取得節點"
+
+#~ msgid "Failed to open the diversions file %sdiversions"
+#~ msgstr "讀取抽換檔 %sdiversions 失敗"
+
+#~ msgid "The diversion file is corrupted"
+#~ msgstr "抽換檔已損壞"
+
+#~ msgid "Invalid line in the diversion file: %s"
+#~ msgstr "在抽換檔中的這一行有誤：%s"
+
+#~ msgid "Internal error adding a diversion"
+#~ msgstr "內部錯誤：在新增抽換資料時發生錯誤"
+
+#~ msgid "The pkg cache must be initialized first"
+#~ msgstr "套件快取必須先初始化"
+
+#~ msgid "Failed to find a Package: header, offset %lu"
+#~ msgstr "找不到套件：檔案標頭，位移 %lu"
+
+#~ msgid "Bad ConfFile section in the status file. Offset %lu"
+#~ msgstr "在 status 檔中的 ConfFile 區段損壞。位移 %lu"
+
+#~ msgid "Error parsing MD5. Offset %lu"
+#~ msgstr "在解析 MD5 時發生錯誤。位移 %lu"
+
+#~ msgid "Couldn't change to %s"
+#~ msgstr "無法切換至 %s"
+
+#~ msgid "Failed to locate a valid control file"
+#~ msgstr "找不到可用的 control 檔"
projects / apt.git / blobdiff