compression formats, with partial downloads and patches is an involved
process which is hard to implement correctly and securely.
-APT frontends share the code and binaries to make this happen in libapt
+APT front-ends share the code and binaries to make this happen in libapt
with the Acquire system, supported by helpers shipped in the apt package
itself and additional transports in individual packages like
apt-transport-https.
For its own operation libapt needs or can make use of Packages, Sources
and Translation-* files, which it will acquire by default, but
-a repository might contain more data files (e.g. Contents) a frontend
-might want to use and would therefore need to be downloaded as well
-(e.g. apt-file).
+a repository might contain more data files (e.g. Contents) a front-end
+(e.g. apt-file) might want to use and would therefore need to be
+downloaded as well.
-This file describes the configuration scheme such a frontend can use to
+This file describes the configuration scheme such a front-end can use to
instruct the Acquire system to download those additional files.
# The Configuration Stanza
flatMetaKey "Packages";
flatDescription "$(RELEASE) Packages";
- Optional "false";
+ Optional "no";
};
All files which should be downloaded (nicknamed 'Targets') are mentioned
After the type you can pick any valid and unique string which preferable
refers to the file it downloads (In the example we picked 'Packages').
This string is used as identifier for the target class and accessible as
-'Created-By' e.g. in the "apt-get indextargets" output as detailed below.
+'Created-By' e.g. in the "apt-get indextargets" output as detailed
+below. It is also used to allow user to enable/disable targets per
+sources.list entry.
All targets have three main properties you can define:
* MetaKey: The identifier of the file to be downloaded as used in the
Additional optional properties:
-* flat{MetaKey,Description}: APT supports two types of repositories:
- dists-style repositories which are the default and by far the most
- common which are named after the fact that the files are in an
- elaborated directory structure. In contrast a flat-style repositories
- lumps all files together in one directory. Support for these flat
- repositories exists mainly for legacy purposes only. It is therefore
- recommend to not set these values.
-* Optional: The default value is 'true' and should be kept at this
- value. If enabled the acquire system will skip the download if the
- file isn't mentioned in the Release file. Otherwise this is treated as
- a hard error and the update process fails. Note that failures while
+* DefaultEnabled: The default value is 'yes' which means that apt will
+ try to acquire this target from all sources. If set to 'no' the user
+ has to explicitly enable this target in the sources.list file with the
+ Targets option(s) – or override this value in a config file.
+* Optional: The default value is 'yes' and should be kept at this value.
+ If enabled the acquire system will skip the download if the file isn't
+ mentioned in the Release file. Otherwise this is treated as a hard
+ error and the update process fails. Note that failures while
downloading (e.g. 404 or hash verification errors) are failures,
regardless of this setting.
* KeepCompressed: The default is the value of Acquire::GzipIndexes,
which defaults to false. If true, the acquire system will keep the
- file compressed on disk rather than extract it. If your frontend can't
+ file compressed on disk rather than extract it. If your front-end can't
deal with compressed files transparently you have to explicitly set
this option to false to avoid problems with users setting the option
globally. On the other hand, if you set it to true or don't set it you
- have to ensure your frontend can deal with all compressed fileformats
+ have to ensure your front-end can deal with all compressed fileformats
supported by apt (libapt users can e.g. use FileFd).
+* flat{MetaKey,Description}: APT supports two types of repositories:
+ dists-style repositories which are the default and by far the most
+ common which are named after the fact that the files are in an
+ elaborated directory structure. In contrast a flat-style repository
+ lumps all files together in one directory. Support for these flat
+ repositories exists mainly for legacy purposes only. It is therefore
+ recommend to not set these values.
The acquire system will automatically choose to download a compressed
*NO* properties have to be set to enable this!
-More properties exist, but these should *NOT* be set by frontends
-requesting files. They exist for internal and end-user usage only:
+More properties exist, but these should *NOT* be set by front-ends
+requesting files. They exist for internal and end-user usage only.
+Some of these are – which are documented here only to ensure that they
+aren't accidentally used by front-ends:
* PDiffs: controls if apt will try to use PDiffs for this target.
Defaults to the value of Acquire::PDiffs which is true by default.
Can be overridden per-source by the sources.list option of the same
name. See the documentation for both of these for details.
+* By-Hash: controls if apt will try to use an URI constructed from
+ a hashsum of the file to download. See the documentation for config
+ option Acquire::By-Hash and sources.list option By-Hash for details.
* CompressionTypes: The default value is a space separated list of
compression types supported by apt (see Acquire::CompressionTypes).
You can set this option to prevent apt from downloading a compression
- type a frontend can't open transparently. This should always be
+ type a front-end can't open transparently. This should always be
a temporary workaround through and a bug should be reported against
- the frontend in question.
+ the front-end in question.
# More examples
flatMetaKey "Sources";
flatDescription "$(RELEASE) Sources";
- Optional "false";
+ Optional "no";
};
};
printed as-is.
* $(RELEASE): This is usually an archive- or codename, e.g. "stable" or
- "stretch". Note that flat-style repositories do not have a archive-
+ "stretch". Note that flat-style repositories do not have an archive-
or codename per-se, so the value might very well be just "/" or so.
- Again, as seen in the sources.list.
* $(COMPONENT): as given in the sources.list, e.g. "main", "non-free" or
"universe". Note that flat-style repositories again do not really
have a meaningful value here.
APT::Architectures (potentially modified by sources.list options),
e.g. "amd64", "i386" or "armel" for the 'deb' type. In type 'deb-src'
this variable has the value "source".
+* $(NATIVE_ARCHITECTURE): The architecture apt treats as the native
+ architecture for this system configured as APT::Architecture
+ defaulting to the architecture apt itself was built for.
Note that while more variables might exist in the implementation, these
are to be considered undefined and their usage strongly discouraged. If
apt-get indextargets --format '$(FILENAME)' "Created-By: Translations" "Language: en"
The line-based filtering and the formating is rather crude and feature-
-less by design, so it is recommend to use dedicated and more powerful
-tools like 'grep-dctrl'.
+less by design: The default format is Debians standard format deb822 (in
+particular: Field names are case-insensitive and the order of fields in
+the stanza is undefined), so instead of apt reimplementing powerful
+filters and formating for this command, it is recommend to use piping
+and dedicated tools like 'grep-dctrl' if you need more than the basics
+provided.
Accessing this information via libapt is done by reading the
sources.lists (pkgSourceList), iterating over the metaIndex objects this
* Target-Of: type of the sources.list entry
* URI, Repo-URI: avoid using. Contains potentially username/password.
Prefer 'Site', especially for display.
-* Optional: Decodes the option of the same name from the configuration.
- Note that it is using 'yes' and 'no' instead of 'true' and 'false'.
+* Optional, DefaultEnabled, KeepCompressed: Decode the options of the
+ same name from the configuration.
* Language, Architecture, Component: as defined further above, but with
the catch that they might be missing if they don't effect the target
(aka: They weren't used while evaluating the MetaKey template).
but you should avoid using them and instead talk to us about a portable
implementation.
-# Multiple application requiring the same files
+# Multiple applications requiring the same files
It is highly encouraged that applications talk to each other and to us
about which files they require. It is usually best to have a common
package ship the configuration needed to get the files, but specific
needs might require specific solutions. Again: talk to us.
+Bad things will happen if multiple front-ends request the same file(s)
+via different targets, which is another reason why coordination is very
+important!
+
# Acquiring files not mentioned in the Release file
You can't. This is by design as these files couldn't be verified to not
start requesting online files…
In other words: We would be opening Pandora's box.
+
+# Acquiring files to a specific location on disk
+
+You can't by design to avoid multiple front-ends requesting the same file
+to be downloaded to multiple different places on (different) disks
+(among other reasons). See the next point for a solution if you really
+have to force a specific location by creating symlinks.
+
+# Post processing the acquired files
+
+You can't modify the files apt has downloaded as apt keeps state with
+e.g. the modification times of the files and advanced features like
+PDiffs break.
+
+You can however install an APT::Update::Post-Invoke{-Success,} hook
+script and use them to copy (modified) files to a different location.
+Use 'apt-get indextargets' (or similar) to get the filenames – do not
+look into /var/lib/apt/lists directly!
+
+Please avoid time consuming calculations in the scripts and instead just
+trigger a background task as there is little to no feedback for the user
+while hook scripts run.
projects / apt.git / blobdiff