msgstr ""
"Project-Id-Version: apt\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2008-10-28 18:12+0100\n"
-"PO-Revision-Date: 2008-08-17 23:45+0800\n"
+"POT-Creation-Date: 2009-04-22 12:25+0200\n"
+"PO-Revision-Date: 2008-11-15 00:49+0800\n"
"Last-Translator: Deng Xiyue <manphiz-guest@users.alioth.debian.org>\n"
"Language-Team: Debian Chinese [GB] <debian-chinese-gb@lists.debian.org>\n"
"MIME-Version: 1.0\n"
#: cmdline/apt-cache.cc:1714 cmdline/apt-cdrom.cc:138 cmdline/apt-config.cc:70
#: cmdline/apt-extracttemplates.cc:225 ftparchive/apt-ftparchive.cc:547
-#: cmdline/apt-get.cc:2571 cmdline/apt-sortpkgs.cc:144
+#: cmdline/apt-get.cc:2582 cmdline/apt-sortpkgs.cc:144
#, c-format
msgid "%s %s for %s compiled on %s %s\n"
msgstr "%s %s for %s 编译于 %s %s\n"
" show - Show a readable record for the package\n"
" depends - Show raw dependency information for a package\n"
" rdepends - Show reverse dependency information for a package\n"
-" pkgnames - List the names of all packages\n"
-" dotty - Generate package graphs for GraphVis\n"
+" pkgnames - List the names of all packages in the system\n"
+" dotty - Generate package graphs for GraphViz\n"
" xvcg - Generate package graphs for xvcg\n"
" policy - Show policy settings\n"
"\n"
" depends - 原原本本地显示该软件包的依赖信息\n"
" rdepends - 显示所有依赖于该软件包的软件包名字\n"
" pkgnames - 列出所有软件包的名字\n"
-" dotty - 生成可用 GraphVis 处理的软件包关系图\n"
+" dotty - 生成可用 GraphViz 处理的软件包关系图\n"
" xvcg - 生成可用 xvcg 处理的软件包的关系图\n"
" policy - 显示软件包的安装设置状态\n"
"\n"
" -i 仅为 unmet 命令显示重要的依赖关系。\n"
" -c=? 读取指定配置文件\n"
" -o=? 设置任意指定的配置选项,例如 -o dir::cache=/tmp\n"
-"若要深入了解,您还可以查阅 apt-cache(8) 和 apt.conf(5) 参考手册。\n"
+"若要了解更多信息,您还可以查阅 apt-cache(8) 和 apt.conf(5) 参考手册。\n"
#: cmdline/apt-cdrom.cc:78
msgid "Please provide a name for this Disc, such as 'Debian 2.1r1 Disk 1'"
msgid "Y"
msgstr "Y"
-#: cmdline/apt-get.cc:146 cmdline/apt-get.cc:1651
+#: cmdline/apt-get.cc:146 cmdline/apt-get.cc:1658
#, c-format
msgid "Regex compilation error - %s"
msgstr "编译正则表达式时出错 - %s"
msgid "Internal error, Ordering didn't finish"
msgstr "内部错误,Ordering 未能完成"
-#: cmdline/apt-get.cc:809 cmdline/apt-get.cc:1990 cmdline/apt-get.cc:2023
+#: cmdline/apt-get.cc:809 cmdline/apt-get.cc:1999 cmdline/apt-get.cc:2032
msgid "Unable to lock the download directory"
msgstr "无法对下载目录加锁"
-#: cmdline/apt-get.cc:819 cmdline/apt-get.cc:2071 cmdline/apt-get.cc:2317
+#: cmdline/apt-get.cc:819 cmdline/apt-get.cc:2080 cmdline/apt-get.cc:2326
#: apt-pkg/cachefile.cc:65
msgid "The list of sources could not be read."
msgstr "无法读取安装源列表。"
msgid "After this operation, %sB disk space will be freed.\n"
msgstr "解压缩后将会空出 %sB 的空间。\n"
-#: cmdline/apt-get.cc:864 cmdline/apt-get.cc:2166
+#: cmdline/apt-get.cc:864 cmdline/apt-get.cc:2175
#, c-format
msgid "Couldn't determine free space in %s"
msgstr "无法获知您在 %s 上的空余空间"
msgid "Do you want to continue [Y/n]? "
msgstr "您希望继续执行吗?[Y/n]"
-#: cmdline/apt-get.cc:984 cmdline/apt-get.cc:2214 apt-pkg/algorithms.cc:1349
+#: cmdline/apt-get.cc:984 cmdline/apt-get.cc:2223 apt-pkg/algorithms.cc:1349
#, c-format
msgid "Failed to fetch %s %s\n"
msgstr "无法下载 %s %s\n"
msgid "Some files failed to download"
msgstr "有一些文件下载失败"
-#: cmdline/apt-get.cc:1003 cmdline/apt-get.cc:2223
+#: cmdline/apt-get.cc:1003 cmdline/apt-get.cc:2232
msgid "Download complete and in download only mode"
msgstr "下载完毕,目前是“仅下载”模式"
msgid "Selected version %s (%s) for %s\n"
msgstr "选定了版本为 %s (%s) 的 %s\n"
-#: cmdline/apt-get.cc:1338
+#: cmdline/apt-get.cc:1307
+#, c-format
+msgid "No source package '%s' picking '%s' instead\n"
+msgstr ""
+
+#: cmdline/apt-get.cc:1345
msgid "The update command takes no arguments"
msgstr " update 命令是不需任何参数的"
-#: cmdline/apt-get.cc:1351
+#: cmdline/apt-get.cc:1358
msgid "Unable to lock the list directory"
msgstr "无法对状态列表目录加锁"
-#: cmdline/apt-get.cc:1403
+#: cmdline/apt-get.cc:1410
msgid "We are not supposed to delete stuff, can't start AutoRemover"
msgstr "我们不应该进行删除,无法启动自动删除器"
-#: cmdline/apt-get.cc:1435
+#: cmdline/apt-get.cc:1442
msgid ""
"The following packages were automatically installed and are no longer "
"required:"
msgstr "下列软件包是自动安装的并且现在不再被使用了:"
-#: cmdline/apt-get.cc:1437
+#: cmdline/apt-get.cc:1444
msgid "Use 'apt-get autoremove' to remove them."
msgstr "使用'apt-get autoremove'来删除它们"
-#: cmdline/apt-get.cc:1442
+#: cmdline/apt-get.cc:1449
msgid ""
"Hmm, seems like the AutoRemover destroyed something which really\n"
"shouldn't happen. Please file a bug report against apt."
msgstr "似乎自动删除器毁掉了一些软件,这不应该发生。请向 apt 提交错误报告。"
-#: cmdline/apt-get.cc:1445 cmdline/apt-get.cc:1733
+#.
+#. if (Packages == 1)
+#. {
+#. c1out << endl;
+#. c1out <<
+#. _("Since you only requested a single operation it is extremely likely that\n"
+#. "the package is simply not installable and a bug report against\n"
+#. "that package should be filed.") << endl;
+#. }
+#.
+#: cmdline/apt-get.cc:1452 cmdline/apt-get.cc:1742
msgid "The following information may help to resolve the situation:"
msgstr "下列的信息可能会对解决问题有所帮助:"
-#: cmdline/apt-get.cc:1449
+#: cmdline/apt-get.cc:1456
msgid "Internal Error, AutoRemover broke stuff"
msgstr "内部错误,自动删除器坏事了"
-#: cmdline/apt-get.cc:1468
+#: cmdline/apt-get.cc:1475
msgid "Internal error, AllUpgrade broke stuff"
msgstr "内部错误,全部升级坏事了"
-#: cmdline/apt-get.cc:1523
+#: cmdline/apt-get.cc:1530
#, c-format
msgid "Couldn't find task %s"
msgstr "无法找到任务 %s"
-#: cmdline/apt-get.cc:1638 cmdline/apt-get.cc:1674
+#: cmdline/apt-get.cc:1645 cmdline/apt-get.cc:1681
#, c-format
msgid "Couldn't find package %s"
msgstr "无法找到软件包 %s"
-#: cmdline/apt-get.cc:1661
+#: cmdline/apt-get.cc:1668
#, c-format
msgid "Note, selecting %s for regex '%s'\n"
msgstr "注意,根据正则表达式“%2$s”选中了 %1$s\n"
-#: cmdline/apt-get.cc:1692
+#: cmdline/apt-get.cc:1699
#, c-format
msgid "%s set to manually installed.\n"
msgstr "%s 被设置为手动安装。\n"
-#: cmdline/apt-get.cc:1705
+#: cmdline/apt-get.cc:1712
msgid "You might want to run `apt-get -f install' to correct these:"
msgstr "您可能需要运行“apt-get -f install”来纠正下列错误:"
-#: cmdline/apt-get.cc:1708
+#: cmdline/apt-get.cc:1715
msgid ""
"Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a "
"solution)."
"有未能满足的依赖关系。请尝试不指明软件包的名字来运行“apt-get -f install”(也可"
"以指定一个解决办法)。"
-#: cmdline/apt-get.cc:1720
+#: cmdline/apt-get.cc:1727
msgid ""
"Some packages could not be installed. This may mean that you have\n"
"requested an impossible situation or if you are using the unstable\n"
"因为系统无法达到您要求的状态造成的。该版本中可能会有一些您需要的软件\n"
"包尚未被创建或是它们还在新到(incoming)目录中。"
-#: cmdline/apt-get.cc:1728
-msgid ""
-"Since you only requested a single operation it is extremely likely that\n"
-"the package is simply not installable and a bug report against\n"
-"that package should be filed."
-msgstr ""
-"您仅要求对单一软件包进行操作,这极有可能是因为该软件包安装不上,同时,\n"
-"您最好提交一个针对这个软件包的故障报告。"
-
-#: cmdline/apt-get.cc:1736
+#: cmdline/apt-get.cc:1745
msgid "Broken packages"
msgstr "无法安装的软件包"
-#: cmdline/apt-get.cc:1765
+#: cmdline/apt-get.cc:1774
msgid "The following extra packages will be installed:"
msgstr "将会安装下列额外的软件包:"
-#: cmdline/apt-get.cc:1854
+#: cmdline/apt-get.cc:1863
msgid "Suggested packages:"
msgstr "建议安装的软件包:"
-#: cmdline/apt-get.cc:1855
+#: cmdline/apt-get.cc:1864
msgid "Recommended packages:"
msgstr "推荐安装的软件包:"
-#: cmdline/apt-get.cc:1883
+#: cmdline/apt-get.cc:1892
msgid "Calculating upgrade... "
msgstr "正在筹划升级... "
-#: cmdline/apt-get.cc:1886 methods/ftp.cc:702 methods/connect.cc:112
+#: cmdline/apt-get.cc:1895 methods/ftp.cc:702 methods/connect.cc:112
msgid "Failed"
msgstr "失败"
-#: cmdline/apt-get.cc:1891
+#: cmdline/apt-get.cc:1900
msgid "Done"
msgstr "完成"
-#: cmdline/apt-get.cc:1958 cmdline/apt-get.cc:1966
+#: cmdline/apt-get.cc:1967 cmdline/apt-get.cc:1975
msgid "Internal error, problem resolver broke stuff"
msgstr "内部错误,问题解决器坏事了"
-#: cmdline/apt-get.cc:2066
+#: cmdline/apt-get.cc:2075
msgid "Must specify at least one package to fetch source for"
msgstr "要下载源代码,必须指定至少一个对应的软件包"
-#: cmdline/apt-get.cc:2096 cmdline/apt-get.cc:2335
+#: cmdline/apt-get.cc:2105 cmdline/apt-get.cc:2344
#, c-format
msgid "Unable to find a source package for %s"
msgstr "无法找到与 %s 对应的源代码包"
-#: cmdline/apt-get.cc:2145
+#: cmdline/apt-get.cc:2154
#, c-format
msgid "Skipping already downloaded file '%s'\n"
msgstr "忽略已下载过的文件“%s”\n"
-#: cmdline/apt-get.cc:2173
+#: cmdline/apt-get.cc:2182
#, c-format
msgid "You don't have enough free space in %s"
msgstr "您在 %s 上没有足够的空余空间"
-#: cmdline/apt-get.cc:2179
+#: cmdline/apt-get.cc:2188
#, c-format
msgid "Need to get %sB/%sB of source archives.\n"
msgstr "需要下载 %sB/%sB 的源代码包。\n"
-#: cmdline/apt-get.cc:2182
+#: cmdline/apt-get.cc:2191
#, c-format
msgid "Need to get %sB of source archives.\n"
msgstr "需要下载 %sB 的源代码包。\n"
-#: cmdline/apt-get.cc:2188
+#: cmdline/apt-get.cc:2197
#, c-format
msgid "Fetch source %s\n"
msgstr "下载源代码 %s\n"
-#: cmdline/apt-get.cc:2219
+#: cmdline/apt-get.cc:2228
msgid "Failed to fetch some archives."
msgstr "有一些包文件无法下载。"
-#: cmdline/apt-get.cc:2247
+#: cmdline/apt-get.cc:2256
#, c-format
msgid "Skipping unpack of already unpacked source in %s\n"
msgstr "对于已经被解包到 %s 目录的源代码包就不再解开了\n"
-#: cmdline/apt-get.cc:2259
+#: cmdline/apt-get.cc:2268
#, c-format
msgid "Unpack command '%s' failed.\n"
msgstr "运行解包的命令“%s”出错。\n"
-#: cmdline/apt-get.cc:2260
+#: cmdline/apt-get.cc:2269
#, c-format
msgid "Check if the 'dpkg-dev' package is installed.\n"
msgstr "请检查是否安装了“dpkg-dev”软件包。\n"
-#: cmdline/apt-get.cc:2277
+#: cmdline/apt-get.cc:2286
#, c-format
msgid "Build command '%s' failed.\n"
msgstr "执行构造软件包命令“%s”失败。\n"
-#: cmdline/apt-get.cc:2296
+#: cmdline/apt-get.cc:2305
msgid "Child process failed"
msgstr "子进程出错"
-#: cmdline/apt-get.cc:2312
+#: cmdline/apt-get.cc:2321
msgid "Must specify at least one package to check builddeps for"
msgstr "要检查生成软件包的构建依赖关系(builddeps),必须指定至少一个软件包"
-#: cmdline/apt-get.cc:2340
+#: cmdline/apt-get.cc:2349
#, c-format
msgid "Unable to get build-dependency information for %s"
msgstr "无法获得 %s 的构建依赖关系(build-dependency)信息"
-#: cmdline/apt-get.cc:2360
+#: cmdline/apt-get.cc:2369
#, c-format
msgid "%s has no build depends.\n"
msgstr " %s 没有构建依赖关系信息。\n"
-#: cmdline/apt-get.cc:2412
+#: cmdline/apt-get.cc:2421
#, c-format
msgid ""
"%s dependency for %s cannot be satisfied because the package %s cannot be "
"found"
msgstr "由于无法找到软件包 %3$s ,因此不能满足 %2$s 所要求的 %1$s 依赖关系"
-#: cmdline/apt-get.cc:2465
+#: cmdline/apt-get.cc:2474
#, c-format
msgid ""
"%s dependency for %s cannot be satisfied because no available versions of "
"由于无法找到符合要求的软件包 %3$s 的可用版本,因此不能满足 %2$s 所要求的 %1"
"$s 依赖关系"
-#: cmdline/apt-get.cc:2501
+#: cmdline/apt-get.cc:2510
#, c-format
msgid "Failed to satisfy %s dependency for %s: Installed package %s is too new"
msgstr "无法满足 %2$s 所要求 %1$s 依赖关系:已安装的软件包 %3$s 太新了"
-#: cmdline/apt-get.cc:2526
+#: cmdline/apt-get.cc:2537
#, c-format
msgid "Failed to satisfy %s dependency for %s: %s"
msgstr "无法满足 %2$s 所要求 %1$s 依赖关系:%3$s"
-#: cmdline/apt-get.cc:2540
+#: cmdline/apt-get.cc:2551
#, c-format
msgid "Build-dependencies for %s could not be satisfied."
msgstr "不能满足软件包 %s 所要求的构建依赖关系。"
-#: cmdline/apt-get.cc:2544
+#: cmdline/apt-get.cc:2555
msgid "Failed to process build dependencies"
msgstr "无法处理构建依赖关系"
-#: cmdline/apt-get.cc:2576
+#: cmdline/apt-get.cc:2587
msgid "Supported modules:"
msgstr "被支持模块:"
-#: cmdline/apt-get.cc:2617
+#: cmdline/apt-get.cc:2628
+#, fuzzy
msgid ""
"Usage: apt-get [options] command\n"
" apt-get [options] install|remove pkg1 [pkg2 ...]\n"
" install - Install new packages (pkg is libc6 not libc6.deb)\n"
" remove - Remove packages\n"
" autoremove - Remove automatically all unused packages\n"
-" purge - Remove and purge packages\n"
+" purge - Remove packages and config files\n"
" source - Download source archives\n"
" build-dep - Configure build-dependencies for source packages\n"
" dist-upgrade - Distribution upgrade, see apt-get(8)\n"
msgid "Unable to accept connection"
msgstr "无法接受连接"
-#: methods/ftp.cc:864 methods/http.cc:960 methods/rsh.cc:303
+#: methods/ftp.cc:864 methods/http.cc:991 methods/rsh.cc:303
msgid "Problem hashing file"
msgstr "把文件加入散列表时出错"
msgid "Unable to connect to %s %s:"
msgstr "不能连接上 %s %s:"
-#: methods/gpgv.cc:65
+#: methods/gpgv.cc:71
#, c-format
msgid "Couldn't access keyring: '%s'"
msgstr "无法访问密匙:“%s”"
-#: methods/gpgv.cc:101
+#: methods/gpgv.cc:107
msgid "E: Argument list from Acquire::gpgv::Options too long. Exiting."
msgstr "错误:Acquire::gpgv::Options 的参数列表超长。结束运行。"
-#: methods/gpgv.cc:205
+#: methods/gpgv.cc:223
msgid ""
"Internal error: Good signature, but could not determine key fingerprint?!"
msgstr "内部错误:签名正确无误,但是无法确认密钥的指纹(key fingerprint)?!"
-#: methods/gpgv.cc:210
+#: methods/gpgv.cc:228
msgid "At least one invalid signature was encountered."
msgstr "至少发现一个无效的签名。"
-#: methods/gpgv.cc:214
+#: methods/gpgv.cc:232
#, c-format
msgid "Could not execute '%s' to verify signature (is gpgv installed?)"
msgstr "无法运行\"%s\"以验证签名(您安装了 gpgv 么?)"
-#: methods/gpgv.cc:219
+#: methods/gpgv.cc:237
msgid "Unknown error executing gpgv"
msgstr "运行 gpgv 时发生未知错误"
-#: methods/gpgv.cc:250
+#: methods/gpgv.cc:271 methods/gpgv.cc:278
msgid "The following signatures were invalid:\n"
msgstr "下列签名无效:\n"
-#: methods/gpgv.cc:257
+#: methods/gpgv.cc:285
msgid ""
"The following signatures couldn't be verified because the public key is not "
"available:\n"
msgid "Read error from %s process"
msgstr "从 %s 进程读取数据出错"
-#: methods/http.cc:377
+#: methods/http.cc:379
msgid "Waiting for headers"
msgstr "正在等待报头"
-#: methods/http.cc:523
+#: methods/http.cc:525
#, c-format
msgid "Got a single header line over %u chars"
msgstr "受到了一行报头条目,它的长度超过了 %u 个字符"
-#: methods/http.cc:531
+#: methods/http.cc:533
msgid "Bad header line"
msgstr "错误的报头条目"
-#: methods/http.cc:550 methods/http.cc:557
+#: methods/http.cc:552 methods/http.cc:559
msgid "The HTTP server sent an invalid reply header"
msgstr "该 http 服务器发送了一个无效的应答报头"
-#: methods/http.cc:586
+#: methods/http.cc:588
msgid "The HTTP server sent an invalid Content-Length header"
msgstr "该 http 服务器发送了一个无效的 Content-Length 报头"
-#: methods/http.cc:601
+#: methods/http.cc:603
msgid "The HTTP server sent an invalid Content-Range header"
msgstr "该 http 服务器发送了一个无效的 Content-Range 报头"
-#: methods/http.cc:603
+#: methods/http.cc:605
msgid "This HTTP server has broken range support"
msgstr "该 http 服务器的 range 支持不正常"
-#: methods/http.cc:627
+#: methods/http.cc:629
msgid "Unknown date format"
msgstr "无法识别的日期格式"
-#: methods/http.cc:774
+#: methods/http.cc:782
msgid "Select failed"
msgstr "select 调用出错"
-#: methods/http.cc:779
+#: methods/http.cc:787
msgid "Connection timed out"
msgstr "连接服务器超时"
-#: methods/http.cc:802
+#: methods/http.cc:810
msgid "Error writing to output file"
msgstr "写输出文件时出错"
-#: methods/http.cc:833
+#: methods/http.cc:841
msgid "Error writing to file"
msgstr "写文件时出错"
-#: methods/http.cc:861
+#: methods/http.cc:869
msgid "Error writing to the file"
msgstr "写文件时出错"
-#: methods/http.cc:875
+#: methods/http.cc:883
msgid "Error reading from server. Remote end closed connection"
msgstr "从服务器读取数据时出错,对方关闭了连接"
-#: methods/http.cc:877
+#: methods/http.cc:885
msgid "Error reading from server"
msgstr "从服务器读取数据出错"
-#: methods/http.cc:945 apt-pkg/contrib/mmap.cc:196
-#, fuzzy
+#: methods/http.cc:976 apt-pkg/contrib/mmap.cc:196
msgid "Failed to truncate file"
-msgstr "æ\97 æ³\95å\86\99å\85¥æ\96\87件 %s"
+msgstr "æ\88ªæ\96æ\96\87件失败"
-#: methods/http.cc:1105
+#: methods/http.cc:1141
msgid "Bad header data"
msgstr "错误的报头数据"
-#: methods/http.cc:1122 methods/http.cc:1177
+#: methods/http.cc:1158 methods/http.cc:1213
msgid "Connection failed"
msgstr "连接失败"
-#: methods/http.cc:1229
+#: methods/http.cc:1305
msgid "Internal error"
msgstr "内部错误"
msgid "Couldn't make mmap of %lu bytes"
msgstr "无法 mmap %lu 字节的数据"
-#: apt-pkg/contrib/mmap.cc:213
-msgid "Dynamic MMap ran out of room"
+#: apt-pkg/contrib/mmap.cc:213 apt-pkg/contrib/mmap.cc:276
+#, c-format
+msgid ""
+"Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. "
+"Current value: %lu. (man 5 apt.conf)"
+msgstr ""
+
+#. d means days, h means hours, min means minutes, s means seconds
+#: apt-pkg/contrib/strutl.cc:335
+#, c-format
+msgid "%lid %lih %limin %lis"
+msgstr ""
+
+#. h means hours, min means minutes, s means seconds
+#: apt-pkg/contrib/strutl.cc:342
+#, c-format
+msgid "%lih %limin %lis"
+msgstr ""
+
+#. min means minutes, s means seconds
+#: apt-pkg/contrib/strutl.cc:349
+#, c-format
+msgid "%limin %lis"
msgstr ""
-#: apt-pkg/contrib/strutl.cc:1014
+#. s means seconds
+#: apt-pkg/contrib/strutl.cc:354
+#, c-format
+msgid "%lis"
+msgstr ""
+
+#: apt-pkg/contrib/strutl.cc:1018
#, c-format
msgid "Selection %s not found"
msgstr "没有发现您的所选 %s"
msgid "Method %s did not start correctly"
msgstr "获取软件包的渠道 %s 所需的驱动程序没有正常启动。"
-#: apt-pkg/acquire-worker.cc:399
+#: apt-pkg/acquire-worker.cc:413
#, c-format
msgid "Please insert the disc labeled: '%s' in the drive '%s' and press enter."
msgstr "请把标有 “%s” 的碟片插入驱动器“%s”再按回车键。"
msgid "MD5Sum mismatch"
msgstr "MD5 校验和不符"
-#: apt-pkg/acquire-item.cc:658 apt-pkg/acquire-item.cc:1421
+#: apt-pkg/acquire-item.cc:658 apt-pkg/acquire-item.cc:1426
msgid "Hash Sum mismatch"
msgstr "Hash 校验和不符"
-#: apt-pkg/acquire-item.cc:1113
+#: apt-pkg/acquire-item.cc:1118
msgid "There is no public key available for the following key IDs:\n"
msgstr "以下 key ID 没有可用的公钥:\n"
-#: apt-pkg/acquire-item.cc:1226
+#: apt-pkg/acquire-item.cc:1231
#, c-format
msgid ""
"I wasn't able to locate a file for the %s package. This might mean you need "
"我无法找到一个对应 %s 软件包的文件。在这种情况下可能需要您手动修正这个软件"
"包。(缘于架构缺失)"
-#: apt-pkg/acquire-item.cc:1285
+#: apt-pkg/acquire-item.cc:1290
#, c-format
msgid ""
"I wasn't able to locate file for the %s package. This might mean you need to "
msgstr ""
"我无法找到对应 %s 软件包的文件。在这种情况下您可能需要手动修正这个软件包。"
-#: apt-pkg/acquire-item.cc:1326
+#: apt-pkg/acquire-item.cc:1331
#, c-format
msgid ""
"The package index files are corrupted. No Filename: field for package %s."
msgstr "软件包的索引文件已损坏。找不到对应软件包 %s 的 Filename: 字段。"
-#: apt-pkg/acquire-item.cc:1413
+#: apt-pkg/acquire-item.cc:1418
msgid "Size mismatch"
msgstr "大小不符"
msgid "Completely removed %s"
msgstr "完全删除了 %s"
-#: apt-pkg/deb/dpkgpm.cc:788
+#: apt-pkg/deb/dpkgpm.cc:789
msgid "Can not write log, openpty() failed (/dev/pts not mounted?)\n"
msgstr "无法写入日志。 openpty() 失败 (/dev/pts 没有 mount 上?)\n"
+#: apt-pkg/deb/debsystem.cc:100
+msgid "Not locked"
+msgstr ""
+
#: methods/rred.cc:219
msgid "Could not patch file"
msgstr "无法打开补丁文件"
msgid "Connection closed prematurely"
msgstr "连接被永久关闭"
+#~ msgid "Dynamic MMap ran out of room"
+#~ msgstr "动态内存映射(Dynamic MMap)空间不足"
+
+#~ msgid ""
+#~ "Since you only requested a single operation it is extremely likely that\n"
+#~ "the package is simply not installable and a bug report against\n"
+#~ "that package should be filed."
+#~ msgstr ""
+#~ "您仅要求对单一软件包进行操作,这极有可能是因为该软件包安装不上,同时,\n"
+#~ "您最好提交一个针对这个软件包的故障报告。"
+
#~ msgid "Line %d too long (max %lu)"
#~ msgstr "第 %d 行超长了(长度限制为 %lu)。"