msgstr ""
"Project-Id-Version: apt-doc 1.0.5\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2015-10-20 19:29+0200\n"
+"POT-Creation-Date: 2016-10-04 19:44+0200\n"
"PO-Revision-Date: 2014-07-04 01:31+0200\n"
"Last-Translator: Omar Campagne <ocampagne@gmail.com>\n"
"Language-Team: Debian l10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
#. type: Content of: <refentry><refsect1><para>
#: apt.8.xml
msgid ""
-"<command>apt</command> (Advanced Package Tool) is the command-line tool for "
-"handling packages. It provides a commandline interface for the package "
-"management of the system. See also &apt-get; and &apt-cache; for more low-"
-"level command options."
+"<command>apt</command> provides a high-level commandline interface for the "
+"package management system. It is intended as an end user interface and "
+"enables some options better suited for interactive usage by default compared "
+"to more specialized APT tools like &apt-get; and &apt-cache;."
msgstr ""
+#. type: Content of: <refentry><refsect1><para>
+#: apt.8.xml
+msgid ""
+"Much like <command>apt</command> itself, its manpage is intended as an end "
+"user interface and as such only mentions the most used commands and options "
+"partly to not duplicate information in multiple places and partly to avoid "
+"overwhelming readers with a cornucopia of options and details."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+#, fuzzy
+#| msgid "apt-get"
+msgid "(&apt-get;)"
+msgstr "apt-get"
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
msgid ""
-"<literal>list</literal> is used to display a list of packages. It supports "
-"shell pattern for matching package names and the following options: "
-"<option>--installed</option>, <option>--upgradable</option>, <option>--"
-"upgradeable</option>, <option>--all-versions</option> are supported."
+"<option>update</option> is used to download package information from all "
+"configured sources. Other commands operate on this data to e.g. perform "
+"package upgrades or search in and display details about all packages "
+"available for installation."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
msgid ""
-"<literal>search</literal> searches for the given term(s) and display "
-"matching packages."
+"<option>upgrade</option> is used to install available upgrades of all "
+"packages currently installed on the system from the sources configured via "
+"&sources-list;. New packages will be installed if required to statisfy "
+"dependencies, but existing packages will never be removed. If an upgrade for "
+"a package requires the remove of an installed package the upgrade for this "
+"package isn't performed."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
-#, fuzzy
-#| msgid ""
-#| "<literal>rdepends</literal> shows a listing of each reverse dependency a "
-#| "package has."
msgid ""
-"<literal>show</literal> shows the package information for the given "
-"package(s)."
+"<literal>full-upgrade</literal> performs the function of upgrade but will "
+"remove currently installed packages if this is needed to upgrade the system "
+"as a whole."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml apt-key.8.xml
+msgid ","
msgstr ""
-"<literal>rdepends</literal> muestra las dependencias inversas de un paquete."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
msgid ""
-"<literal>install</literal> is followed by one or more package names desired "
-"for installation or upgrading."
+"Performs the requested action on one or more packages specified via ®ex;, "
+"&glob; or exact match. The requested action can be overridden for specific "
+"packages by append a plus (+) to the package name to install this package or "
+"a minus (-) to remove it."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml apt-get.8.xml
+#: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "A specific version of a package can be selected for installation by "
+#| "following the package name with an equals and the version of the package "
+#| "to select. This will cause that version to be located and selected for "
+#| "install. Alternatively a specific distribution can be selected by "
+#| "following the package name with a slash and the version of the "
+#| "distribution or the Archive name (stable, testing, unstable)."
msgid ""
"A specific version of a package can be selected for installation by "
-"following the package name with an equals and the version of the package to "
-"select. This will cause that version to be located and selected for install. "
-"Alternatively a specific distribution can be selected by following the "
-"package name with a slash and the version of the distribution or the Archive "
-"name (stable, testing, unstable)."
+"following the package name with an equals (=) and the version of the package "
+"to select. Alternatively the version from a specific release can be selected "
+"by following the package name with a forward slash (/) and codename (&debian-"
+"stable-codename;, &debian-testing-codename;, sid …) or suite name (stable, "
+"testing, unstable). This will also select versions from this release for "
+"dependencies of this package if needed to satisfy the request."
msgstr ""
"Puede seleccionar una versión especifica de un paquete poniendo a "
"continuación del nombre del paquete un símbolo igual («=») seguido de la "
"(stable, testing, unstable)."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml apt-get.8.xml
+#: apt.8.xml
msgid ""
-"<literal>remove</literal> is identical to <literal>install</literal> except "
-"that packages are removed instead of installed. Note that removing a package "
-"leaves its configuration files on the system. If a plus sign is appended to "
-"the package name (with no intervening space), the identified package will be "
-"installed instead of removed."
-msgstr ""
-"<literal>remove</literal> se comporta del mismo modo que <literal>install</"
-"literal> con la diferencia de que elimina los paquetes en vez de "
-"instalarlos. Tenga en cuenta que al eliminar un paquete sus ficheros de "
-"configuración permanecen en el sistema. Si un signo de suma precede al "
-"nombre del paquete (sin ningún espacio en blanco entre los dos), el paquete "
-"en cuestión será instalado en vez de eliminado."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.8.xml apt-get.8.xml
-msgid "(and the"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.8.xml apt-get.8.xml
-msgid "alias since 1.1)"
+"Removing a package removes all packaged data, but leaves usually small "
+"(modified) user configuration files behind, in case the remove was an "
+"accident. Just issuing an installation request for the accidentally removed "
+"package will restore its function as before in that case. On the other hand "
+"you can get rid of these leftovers by calling <command>purge</command> even "
+"on already removed packages. Note that this does not affect any data or "
+"configuration stored in your home directory."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml apt-get.8.xml
+#: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>autoremove</literal> is used to remove packages that were "
+#| "automatically installed to satisfy dependencies for other packages and "
+#| "are now no longer needed."
msgid ""
"<literal>autoremove</literal> is used to remove packages that were "
"automatically installed to satisfy dependencies for other packages and are "
-"now no longer needed."
+"now no longer needed as dependencies changed or the package(s) needing them "
+"were removed in the meantime."
msgstr ""
"<literal>autoremove</literal> desinstala paquetes que se instalaron "
"automáticamente para satisfacer las dependencias de otros paquetes pero que "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
msgid ""
-"<literal>edit-sources</literal> lets you edit your sources.list file and "
-"provides basic sanity checks."
+"You should check that the list does not include applications you have grown "
+"to like even though they were once installed just as a dependency of another "
+"package. You can mark such a package as manually installed by using &apt-"
+"mark;. Packages which you have installed explicitly via <command>install</"
+"command> are also never proposed for automatic removal."
msgstr ""
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
#: apt.8.xml
#, fuzzy
-#| msgid ""
-#| "<literal>showhold</literal> is used to print a list of packages on hold "
-#| "in the same way as for the other show commands."
-msgid ""
-"<literal>update</literal> is used to resynchronize the package index files "
-"from their sources."
-msgstr ""
-"<literal>showhold</literal> muestra una lista de paquetes retenidos («hold») "
-"de la misma forma que las otras órdenes «show»."
+#| msgid "&apt-conf;"
+msgid "(&apt-cache;)"
+msgstr "&apt-conf;"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
msgid ""
-"<literal>upgrade</literal> is used to install the newest versions of all "
-"packages currently installed on the system from the sources enumerated in "
-"<filename>/etc/apt/sources.list</filename>. New packages will be installed, "
-"but existing packages will never be removed."
+"<option>search</option> can be used to search for the given ®ex; term(s) "
+"in the list of available packages and display matches. This can e.g. be "
+"useful if you are looking for packages having a specific feature. If you "
+"are looking for a package including a specific file try &apt-file;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
msgid ""
-"<literal>full-upgrade</literal> performs the function of upgrade but may "
-"also remove installed packages if that is required in order to resolve a "
-"package conflict."
+"Show information about the given package(s) including its dependencies, "
+"installation and download size, sources the package is available from, the "
+"description of the packages content and much more. It can e.g. be helpful to "
+"look at this information before allowing &apt; to remove a package or while "
+"searching for new packages to install."
msgstr ""
-#. type: Content of: <refentry><refsect1><title>
-#: apt.8.xml apt-get.8.xml apt-cache.8.xml apt-mark.8.xml apt-config.8.xml
-#: apt-extracttemplates.1.xml apt-sortpkgs.1.xml apt-ftparchive.1.xml
-msgid "options"
-msgstr "Opciones"
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+msgid "(work-in-progress)"
+msgstr ""
-#. type: Content of: <refentry><refsect1><title>
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
-msgid "Script usage"
+msgid ""
+"<option>list</option> is somewhat similar to <command>dpkg-query --list</"
+"command> in that it can display a list of packages satisfying certain "
+"criteria. It supports &glob; patterns for matching package names as well as "
+"options to list installed (<option>--installed</option>), upgradeable "
+"(<option>--upgradeable</option>) or all available (<option>--all-versions</"
+"option>) versions."
msgstr ""
-#. type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
msgid ""
-"The &apt; commandline is designed as a end-user tool and it may change the "
-"output between versions. While it tries to not break backward compatibility "
-"there is no guarantee for it either. All features of &apt; are available in "
-"&apt-cache; and &apt-get; via APT options. Please prefer using these "
-"commands in your scripts."
+"<literal>edit-sources</literal> lets you edit your &sources-list; files in "
+"your preferred texteditor while also providing basic sanity checks."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
#: apt.8.xml
-msgid "Differences to &apt-get;"
+msgid "Script Usage and Differences from Other APT Tools"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
#: apt.8.xml
msgid ""
-"The <command>apt</command> command is meant to be pleasant for end users and "
-"does not need to be backward compatible like &apt-get;. Therefore some "
-"options are different:"
+"The &apt; commandline is designed as an end-user tool and it may change "
+"behavior between versions. While it tries not to break backward "
+"compatibility this is not guaranteed either if a change seems beneficial for "
+"interactive use."
msgstr ""
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml
-#, fuzzy
-#| msgid "the <literal>Package:</literal> line"
-msgid "The option <literal>DPkg::Progress-Fancy</literal> is enabled."
-msgstr "La línea <literal>Package:</literal>"
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml
-#, fuzzy
-#| msgid "the <literal>Component:</literal> line"
-msgid "The option <literal>APT::Color</literal> is enabled."
-msgstr "La línea <literal>Component:</literal>"
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#. type: Content of: <refentry><refsect1><para>
#: apt.8.xml
msgid ""
-"A new <literal>list</literal> command is available similar to <literal>dpkg "
-"--list</literal>."
+"All features of &apt; are available in dedicated APT tools like &apt-get; "
+"and &apt-cache; as well. &apt; just changes the default value of some "
+"options (see &apt-conf; and specifically the Binary scope). So you should "
+"prefer using these commands (potentially with some additional options "
+"enabled) in your scripts as they keep backward compatibility as much as "
+"possible."
msgstr ""
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml
-#, fuzzy
-#| msgid "the <literal>Archive:</literal> or <literal>Suite:</literal> line"
-msgid ""
-"The option <literal>upgrade</literal> has <literal>--with-new-pkgs</literal> "
-"enabled by default."
-msgstr "Las líneas <literal>Archive:</literal> o <literal>Suite:</literal>"
-
#. type: Content of: <refentry><refsect1><title>
#: apt.8.xml apt-get.8.xml apt-cache.8.xml apt-key.8.xml apt-mark.8.xml
#: apt-secure.8.xml apt-cdrom.8.xml apt-config.8.xml apt.conf.5.xml
"invalidar las decisiones tomadas por el sistema de resolución de conflictos "
"de apt-get."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"A specific version of a package can be selected for installation by "
+"following the package name with an equals and the version of the package to "
+"select. This will cause that version to be located and selected for install. "
+"Alternatively a specific distribution can be selected by following the "
+"package name with a slash and the version of the distribution or the Archive "
+"name (stable, testing, unstable)."
+msgstr ""
+"Puede seleccionar una versión especifica de un paquete poniendo a "
+"continuación del nombre del paquete un símbolo igual («=») seguido de la "
+"versión deseada. Esto provocará que se localice y seleccione esa versión "
+"para su instalación. Alternativamente se puede seleccionar una distribución "
+"específica poniendo a continuación del nombre del paquete una barra («/») "
+"seguida de la versión de la distribución o su nombre en el archivo de Debian "
+"(stable, testing, unstable)."
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
msgid ""
"comportamiento deseado, debe anclar la expresión regular con un «^» o un "
"«$», o bien crear una expresión regular más específica."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"<literal>remove</literal> is identical to <literal>install</literal> except "
+"that packages are removed instead of installed. Note that removing a package "
+"leaves its configuration files on the system. If a plus sign is appended to "
+"the package name (with no intervening space), the identified package will be "
+"installed instead of removed."
+msgstr ""
+"<literal>remove</literal> se comporta del mismo modo que <literal>install</"
+"literal> con la diferencia de que elimina los paquetes en vez de "
+"instalarlos. Tenga en cuenta que al eliminar un paquete sus ficheros de "
+"configuración permanecen en el sistema. Si un signo de suma precede al "
+"nombre del paquete (sin ningún espacio en blanco entre los dos), el paquete "
+"en cuestión será instalado en vez de eliminado."
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
msgid ""
"no usa dselect es probable que desee ejecutar <literal>apt-get clean</"
"literal> de vez en cuando para liberar algo de espacio en disco."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt-get.8.xml
+msgid "(and the"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt-get.8.xml
+msgid "alias since 1.1)"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
msgid ""
"opción de configuración <literal>APT::Clean-Installed</literal> está "
"desactivada impedirá que se borren los paquetes instalados."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"<literal>autoremove</literal> is used to remove packages that were "
+"automatically installed to satisfy dependencies for other packages and are "
+"now no longer needed."
+msgstr ""
+"<literal>autoremove</literal> desinstala paquetes que se instalaron "
+"automáticamente para satisfacer las dependencias de otros paquetes pero que "
+"ya no son necesarios."
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
#, fuzzy
"command is mainly used as an interface for external tools working with APT "
"to get information as well as filenames for downloaded files so they can use "
"them as well instead of downloading them again on their own. Detailed "
-"documentation is omitted here and can instead be found in the source tree in "
-"<literal><filename>doc/acquire-additional-files.txt</filename></literal>."
+"documentation is omitted here and can instead be found in the file &apt-"
+"acquire-additional-files; shipped by the <package>apt-doc</package> package."
msgstr ""
+#. type: Content of: <refentry><refsect1><title>
+#: apt-get.8.xml apt-cache.8.xml apt-config.8.xml apt-extracttemplates.1.xml
+#: apt-sortpkgs.1.xml apt-ftparchive.1.xml
+msgid "options"
+msgstr "Opciones"
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
msgid ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
+#, fuzzy
+#| msgid ""
+#| "Show upgraded packages; print out a list of all packages that are to be "
+#| "upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
msgid ""
-"Show upgraded packages; print out a list of all packages that are to be "
-"upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
+"Do not show a list of all packages that are to be upgraded. Configuration "
+"Item: <literal>APT::Get::Show-Upgraded</literal>."
msgstr ""
"Muestra los paquetes que se van a actualizar. Opción de configuración: "
"<literal>APT::Get::Show-Upgraded</literal>."
#: apt-get.8.xml
msgid ""
"Forbid the update command to acquire unverifiable data from configured "
-"sources. Apt will fail at the update command for repositories without valid "
-"cryptographically signatures. Configuration Item: <literal>Acquire::"
+"sources. APT will fail at the update command for repositories without valid "
+"cryptographically signatures. See also &apt-secure; for details on the "
+"concept and the implications. Configuration Item: <literal>Acquire::"
"AllowInsecureRepositories</literal>."
msgstr ""
"literal>."
msgstr ""
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"Adds the given file as a source for metadata. Can be repeated to add "
+"multiple files. See <option>--with-source</option> description in &apt-"
+"cache; for further details."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><title>
#: apt-get.8.xml apt-cache.8.xml apt-key.8.xml apt-mark.8.xml apt.conf.5.xml
#: apt_preferences.5.xml
#. type: Content of: <refentry><refsect1><para>
#: apt-cache.8.xml
+#, fuzzy
+#| msgid ""
+#| "<command>apt-cache</command> performs a variety of operations on APT's "
+#| "package cache. <command>apt-cache</command> does not manipulate the state "
+#| "of the system but does provide operations to search and generate "
+#| "interesting output from the package metadata."
msgid ""
"<command>apt-cache</command> performs a variety of operations on APT's "
"package cache. <command>apt-cache</command> does not manipulate the state of "
"the system but does provide operations to search and generate interesting "
-"output from the package metadata."
+"output from the package metadata. The metadata is acquired and updated via "
+"the 'update' command of e.g. <command>apt-get</command>, so that it can be "
+"outdated if the last update is too long ago, but in exchange <command>apt-"
+"cache</command> works independently of the availability of the configured "
+"sources (e.g. offline)."
msgstr ""
"<command>apt-cache</command> realiza una serie de operaciones sobre la caché "
"(registro o lista) de paquetes de APT. <command>apt-cache</command> no "
msgid ""
"Per default <command>depends</command> and <command>rdepends</command> print "
"only dependencies explicitly expressed in the metadata. With this flag it "
-"will also show dependencies implicitely added based on the encountered "
-"data. A <literal>Conflicts: foo</literal> e.g. expresses implicitely that "
-"this package also conflicts with the package foo from any other "
-"architecture. Configuration Item: <literal>APT::Cache::ShowImplicit</"
-"literal>."
+"will also show dependencies implicitly added based on the encountered data. "
+"A <literal>Conflicts: foo</literal> e.g. expresses implicitly that this "
+"package also conflicts with the package foo from any other architecture. "
+"Configuration Item: <literal>APT::Cache::ShowImplicit</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
"a paquetes actualmente instalados. Opción de configuración: <literal>APT::"
"Cache::Installed</literal>."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
+msgid ""
+"Adds the given file as a source for metadata. Can be repeated to add "
+"multiple files. Supported are currently <literal>*.deb</literal>, "
+"<literal>*.dsc</literal>, <literal>*.changes</literal>, <literal>Sources</"
+"literal> and <literal>Packages</literal> files as well as source package "
+"directories. Files are matched based on their name only, not their content!"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
+msgid ""
+"<literal>Sources</literal> and <literal>Packages</literal> can be compressed "
+"in any format apt supports as long as they have the correct extension. If "
+"you need to store multiple of these files in one directory you can prefix a "
+"name of your choice with the last character being an underscore "
+"(\"<literal>_</literal>\"). Example: my.example_Packages.xz"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
+#, fuzzy
+#| msgid ""
+#| "Use source index field ordering. Configuration Item: <literal>APT::"
+#| "SortPkgs::Source</literal>."
+msgid ""
+"Note that these sources are treated as trusted (see &apt-secure;). "
+"Configuration Item: <literal>APT::Sources::With</literal>."
+msgstr ""
+"Utililza el orden por el campo de índice de fuentes. Opción de "
+"configuración: <literal>APT::SortPkgs::Source</literal>."
+
#. type: Content of: <refentry><refsect1><para>
#: apt-cache.8.xml
msgid "&apt-conf;, &sources-list;, &apt-get;"
"usa para autenticar paquetes. Los paquetes autenticados mediante estas "
"claves se consideran de confianza."
+#. type: Content of: <refentry><refsect1><para>
+#: apt-key.8.xml
+msgid ""
+"Note that if usage of <command>apt-key</command> is desired the additional "
+"installation of the GNU Privacy Guard suite (packaged in <package>gnupg</"
+"package>) is required. For this reason alone the programmatic usage "
+"(especially in package maintainerscripts!) is strongly discouraged. Further "
+"more the output format of all commands is undefined and can and does change "
+"whenever the underlying commands change. <command>apt-key</command> will try "
+"to detect such usage and generates warnings on stderr in these cases."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><title>
#: apt-key.8.xml
msgid "Commands"
"el fichero dado con el parámetro &synopsis-param-filename; o desde la "
"entrada estándar si el nombre de fichero se define como <literal>-</literal>."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-key.8.xml
+msgid ""
+"It is critical that keys added manually via <command>apt-key</command> are "
+"verified to belong to the owner of the repositories they claim to be for "
+"otherwise the &apt-secure; infrastructure is completely undermined."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-key.8.xml
+msgid ""
+"Instead of using this command a keyring can be placed directly in the "
+"<filename>/etc/apt/trusted.gpg.d/</filename> directory with a descriptive "
+"name (same rules for filename apply as for &apt-conf; files) and "
+"\"<literal>gpg</literal>\" as file extension."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
msgid "Remove a key from the list of trusted keys."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
-msgid "List trusted keys."
+#, fuzzy
+#| msgid "List trusted keys."
+msgid "List trusted keys with fingerprints."
msgstr "Lista las claves de confianza."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
-msgid "List fingerprints of trusted keys."
-msgstr "Lista las huellas digitales de las claves de confianza."
+msgid ""
+"Pass advanced options to gpg. With <command>adv --recv-key</command> you can "
+"e.g. download key from keyservers directly into the the trusted set of keys. "
+"Note that there are <emphasis>no</emphasis> checks performed, so it is easy "
+"to completely undermine the &apt-secure; infrastructure if used without care."
+msgstr ""
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
#: apt-key.8.xml
-msgid ""
-"Pass advanced options to gpg. With adv --recv-key you can download the "
-"public key."
+msgid "(deprecated)"
msgstr ""
-"Proporciona opciones avanzadas a gpg. Puede descargar la clave pública con "
-"«adv --recv-key»."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
"keyring</literal> de su distribución; esto es, el paquete &keyring-package; "
"en &keyring-distro;."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-key.8.xml
+msgid ""
+"Note that a distribution does not need to and in fact should not use this "
+"command any longer and instead ship keyring files in the <filename>/etc/apt/"
+"trusted.gpg</filename> directory directly as this avoids a dependency on "
+"<package>gnupg</package> and it is easier to manage keys by simply adding "
+"and removing files for maintainers and users alike."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
msgid ""
"de APT para Ubuntu sí es compatible."
#. type: Content of: <refentry><refsect1><title>
-#: apt-key.8.xml apt-cdrom.8.xml
+#: apt-key.8.xml apt-mark.8.xml apt-cdrom.8.xml
msgid "Options"
msgstr "Opciones"
"<filename>trusted.gpg</filename> es el registro de claves principal, esto "
"es, por ejemplo, que las claves nuevas se añaden a este fichero."
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml
-msgid "<filename>/etc/apt/trustdb.gpg</filename>"
-msgstr "<filename>/etc/apt/trustdb.gpg</filename>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml
-msgid "Local trust database of archive keys."
-msgstr "Base de datos local de las claves de confianza de archivos Debian"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml
-msgid "&keyring-filename;"
-msgstr "&keyring-filename;"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml
-msgid "Keyring of &keyring-distro; archive trusted keys."
-msgstr "Registro de las claves de confianza del archivo de &keyring-distro;."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml
-msgid "&keyring-removed-filename;"
-msgstr "&keyring-removed-filename;"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml
-msgid "Keyring of &keyring-distro; archive removed trusted keys."
-msgstr ""
-"Registro de las claves de confianza eliminadas del archivo de &keyring-"
-"distro;."
-
#. type: Content of: <refentry><refsect1><para>
#: apt-key.8.xml
msgid "&apt-get;, &apt-secure;"
#. type: Content of: <refentry><refnamediv><refpurpose>
#: apt-mark.8.xml
-msgid "mark/unmark a package as being automatically-installed"
-msgstr "Marca o desmarca un paquete como instalado automáticamente"
+msgid "show, set and unset various settings for a package"
+msgstr ""
#. type: Content of: <refentry><refsect1><para>
#: apt-mark.8.xml
msgid ""
-"<command>apt-mark</command> will change whether a package has been marked as "
-"being automatically installed."
+"<command>apt-mark</command> can be used as a unified front-end to set "
+"various settings for a package, such as marking a package as being "
+"automatically/manually installed or changing <command>dpkg</command> "
+"selections such as hold, install, deinstall and purge which are respected e."
+"g. by <command>apt-get dselect-upgrade</command> or <command>aptitude</"
+"command>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-mark.8.xml
+msgid "Automatically and Manually Installed Packages"
msgstr ""
-"<command>apt-mark</command> conmuta si un paquete se instaló automáticamente "
-"o no."
#. type: Content of: <refentry><refsect1><para>
#: apt-mark.8.xml
+#, fuzzy
+#| msgid ""
+#| "When you request that a package is installed, and as a result other "
+#| "packages are installed to satisfy its dependencies, the dependencies are "
+#| "marked as being automatically installed. Once these automatically "
+#| "installed packages are no longer depended on by any manually installed "
+#| "packages, they will be removed by e.g. <command>apt-get</command> or "
+#| "<command>aptitude</command>."
msgid ""
"When you request that a package is installed, and as a result other packages "
"are installed to satisfy its dependencies, the dependencies are marked as "
-"being automatically installed. Once these automatically installed packages "
-"are no longer depended on by any manually installed packages, they will be "
-"removed by e.g. <command>apt-get</command> or <command>aptitude</command>."
+"being automatically installed, while the package you installed explicitly is "
+"marked as manually installed. Once an automatically installed package is no "
+"longer depended on by any manually installed package it is considered no "
+"longer needed and e.g. <command>apt-get</command> or <command>aptitude</"
+"command> will at least suggest removing them."
msgstr ""
"Cuando solicita la instalación de un paquete y como resultado de ello se "
"instalan otros paquetes para satisfacer sus dependencias, éstos se marcarán "
"manualmente, impidiendo la eliminación automática de este paquete si ningún "
"otro depende de él."
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml
-msgid ""
-"<literal>hold</literal> is used to mark a package as held back, which will "
-"prevent the package from being automatically installed, upgraded or "
-"removed. The command is only a wrapper around <command>dpkg --set-"
-"selections</command> and the state is therefore maintained by &dpkg; and not "
-"affected by the <option>--file</option> option."
-msgstr ""
-"<literal>hold</literal> sirve para marcar un paquete para su retención, "
-"impidiendo que el paquete se instale, actualice o elimine de forma "
-"automática. La orden es una interfaz para <command>dpkg --set-selections</"
-"command>, por lo que &dpkg; preserva el estado sin que la opción <option>--"
-"file</option> tenga efecto sobre él."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml
-msgid ""
-"<literal>unhold</literal> is used to cancel a previously set hold on a "
-"package to allow all actions again."
-msgstr ""
-"<literal>unhold</literal> sirve para permitir cualquier acción habitual "
-"sobre un paquete previamente marcado con «hold»."
-
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-mark.8.xml
msgid ""
"<literal>showauto</literal>, a excepción de que muestra una lista de "
"paquetes manualmente instalados."
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-mark.8.xml
+msgid ""
+"Read/Write package stats from the filename given with the parameter "
+"&synopsis-param-filename; instead of from the default location, which is "
+"<filename>extended_status</filename> in the directory defined by the "
+"Configuration Item: <literal>Dir::State</literal>."
+msgstr ""
+"Escribe y lee las estadísticas de los paquetes con el nombre de fichero "
+"definido con el parámetro &synopsis-param-filename;, en lugar de la "
+"ubicación predeterminada, que es <filename>extended_status</filename> en el "
+"directorio definido con la opción de configuración: <literal>Dir::State</"
+"literal>."
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-mark.8.xml
+msgid "Prevent Changes for a Package"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-mark.8.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>manual</literal> is used to mark a package as being manually "
+#| "installed, which will prevent the package from being automatically "
+#| "removed if no other packages depend on it."
+msgid ""
+"<literal>hold</literal> is used to mark a package as held back, which will "
+"prevent the package from being automatically installed, upgraded or removed."
+msgstr ""
+"<literal>manual</literal> sirve para marcar un paquete como instalado "
+"manualmente, impidiendo la eliminación automática de este paquete si ningún "
+"otro depende de él."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-mark.8.xml
+msgid ""
+"<literal>unhold</literal> is used to cancel a previously set hold on a "
+"package to allow all actions again."
+msgstr ""
+"<literal>unhold</literal> sirve para permitir cualquier acción habitual "
+"sobre un paquete previamente marcado con «hold»."
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-mark.8.xml
msgid ""
"<literal>showhold</literal> muestra una lista de paquetes retenidos («hold») "
"de la misma forma que las otras órdenes «show»."
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><title>
+#: apt-mark.8.xml
+msgid "Schedule Packages for Install, Remove and Purge"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
#: apt-mark.8.xml
msgid ""
-"Read/Write package stats from the filename given with the parameter "
-"&synopsis-param-filename; instead of from the default location, which is "
-"<filename>extended_status</filename> in the directory defined by the "
-"Configuration Item: <literal>Dir::State</literal>."
+"Some front-ends like <command>apt-get dselect-upgrade</command> can be used "
+"to apply previously scheduled changes to the install state of packages. Such "
+"changes can be scheduled with the <option>install</option>, <option>remove</"
+"option> (also known as <option>deinstall</option>) and <option>purge</"
+"option> commands. Packages with a specific selection can be displayed with "
+"<option>showinstall</option>, <option>showremove</option> and "
+"<option>showpurge</option> respectively. More information about these so "
+"called dpkg selections can be found in &dpkg;."
msgstr ""
-"Escribe y lee las estadísticas de los paquetes con el nombre de fichero "
-"definido con el parámetro &synopsis-param-filename;, en lugar de la "
-"ubicación predeterminada, que es <filename>extended_status</filename> en el "
-"directorio definido con la opción de configuración: <literal>Dir::State</"
-"literal>."
#. type: Content of: <refentry><refsect1><para>
#: apt-mark.8.xml
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
-msgid ""
-"Starting with version 0.6, <command>apt</command> contains code that does "
-"signature checking of the Release file for all archives. This ensures that "
-"packages in the archive can't be modified by people who have no access to "
-"the Release file signing key."
+#, fuzzy
+#| msgid ""
+#| "Starting with version 0.6, <command>apt</command> contains code that does "
+#| "signature checking of the Release file for all archives. This ensures "
+#| "that packages in the archive can't be modified by people who have no "
+#| "access to the Release file signing key."
+msgid ""
+"Starting with version 0.6, <command>APT</command> contains code that does "
+"signature checking of the Release file for all repositories. This ensures "
+"that data like packages in the archive can't be modified by people who have "
+"no access to the Release file signing key. Starting with version 1.1 "
+"<command>APT</command> requires repositories to provide recent "
+"authentication information for unimpeded usage of the repository."
msgstr ""
"Desde la versión 0.6, <command>apt</command> contiene el código que realiza "
"la comprobación de la firma del fichero «Release» para todos los archivos. "
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
msgid ""
-"If a package comes from a archive without a signature, or with a signature "
-"that apt does not have a key for, that package is considered untrusted, and "
-"installing it will result in a big warning. <command>apt-get</command> will "
-"currently only warn for unsigned archives; future releases might force all "
-"sources to be verified before downloading packages from them."
+"If an archive has an unsigned Release file or no Release file at all current "
+"APT versions will refuse to download data from them by default in "
+"<command>update</command> operations and even if forced to download front-"
+"ends like &apt-get; will require explicit confirmation if an installation "
+"request includes a package from such an unauthenticated archive."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+msgid ""
+"As a temporary exception &apt-get; (not &apt;!) raises warnings only if it "
+"encounters unauthenticated archives to give a slightly longer grace period "
+"on this backward compatibility effecting change. This exception will be "
+"removed in future releases and you can opt-out of this grace period by "
+"setting the configuration option <option>Binary::apt-get::Acquire::"
+"AllowInsecureRepositories</option> to <literal>false</literal> or <option>--"
+"no-allow-insecure-repositories</option> on the command line."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+msgid ""
+"You can force all APT clients to raise only warnings by setting the "
+"configuration option <option>Acquire::AllowInsecureRepositories</option> to "
+"<literal>true</literal>. Individual repositories can also be allowed to be "
+"insecure via the &sources-list; option <literal>allow-insecure=yes</"
+"literal>. Note that insecure repositories are strongly discouraged and all "
+"options to force apt to continue supporting them will eventually be "
+"removed. Users also have the <option>Trusted</option> option available to "
+"disable even the warnings, but be sure to understand the implications as "
+"detailed in &sources-list;."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+msgid ""
+"A repository which previously was authentication but would loose this state "
+"in an <command>update</command> operation raises an error in all APT clients "
+"irrespective of the option to allow or forbid usage of insecure "
+"repositories. The error can be overcome by additionally setting "
+"<option>Acquire::AllowDowngradeToInsecureRepositories</option> to "
+"<literal>true</literal> or for Individual repositories with the &sources-"
+"list; option <literal>allow-downgrade-to-insecure=yes</literal>."
msgstr ""
-"Si el paquete viene de un archivo sin una firma o con una firma de la que "
-"apt no tiene su clave, el paquete se considerará no fiable y su instalación "
-"provocará un aviso importante. <command>apt-get</command> actualmente sólo "
-"avisa de los archivos sin firmar, puede que las próximas versiones fuercen "
-"una comprobación de todas las fuentes antes de descargar paquetes desde "
-"ellas."
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "The package front-ends &apt-get;, &aptitude; and &synaptic; support this "
+#| "new authentication feature."
msgid ""
-"The package frontends &apt-get;, &aptitude; and &synaptic; support this new "
-"authentication feature."
+"Note: All APT-based package management front-ends like &apt-get;, &aptitude; "
+"and &synaptic; support this authentication feature, so this manpage uses "
+"<literal>APT</literal> to refer to them all for simplicity only."
msgstr ""
"Las interfaces de gestión de paquetes &apt-get;, &aptitude; y &synaptic; "
"pueden usar esta nueva funcionalidad de autenticación."
#. type: Content of: <refentry><refsect1><title>
#: apt-secure.8.xml
-msgid "Trusted archives"
+#, fuzzy
+#| msgid "Trusted archives"
+msgid "Trusted Repositories"
msgstr "Archivos de confianza"
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
-msgid ""
-"The chain of trust from an apt archive to the end user is made up of several "
+#, fuzzy
+#| msgid ""
+#| "The chain of trust from an apt archive to the end user is made up of "
+#| "several steps. <command>apt-secure</command> is the last step in this "
+#| "chain; trusting an archive does not mean that you trust its packages not "
+#| "to contain malicious code, but means that you trust the archive "
+#| "maintainer. It's the archive maintainer's responsibility to ensure that "
+#| "the archive's integrity is preserved."
+msgid ""
+"The chain of trust from an APT archive to the end user is made up of several "
"steps. <command>apt-secure</command> is the last step in this chain; "
"trusting an archive does not mean that you trust its packages not to contain "
"malicious code, but means that you trust the archive maintainer. It's the "
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
-msgid ""
-"The chain of trust in Debian starts when a maintainer uploads a new package "
-"or a new version of a package to the Debian archive. In order to become "
-"effective, this upload needs to be signed by a key contained in the Debian "
-"Maintainers keyring (available in the debian-keyring package). Maintainers' "
-"keys are signed by other maintainers following pre-established procedures to "
-"ensure the identity of the key holder."
+#, fuzzy
+#| msgid ""
+#| "The chain of trust in Debian starts when a maintainer uploads a new "
+#| "package or a new version of a package to the Debian archive. In order to "
+#| "become effective, this upload needs to be signed by a key contained in "
+#| "the Debian Maintainers keyring (available in the debian-keyring package). "
+#| "Maintainers' keys are signed by other maintainers following pre-"
+#| "established procedures to ensure the identity of the key holder."
+msgid ""
+"The chain of trust in Debian starts (e.g.) when a maintainer uploads a new "
+"package or a new version of a package to the Debian archive. In order to "
+"become effective, this upload needs to be signed by a key contained in one "
+"of the Debian package maintainer keyrings (available in the debian-keyring "
+"package). Maintainers' keys are signed by other maintainers following pre-"
+"established procedures to ensure the identity of the key holder. Similar "
+"procedures exist in all Debian-based distributions."
msgstr ""
"La cadena de confianza de Debian comienza cuando un mantenedor sube un nuevo "
"paquete o una nueva versión de un paquete al archivo de Debian. Para que la "
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "However, it does not defend against a compromise of the Debian master "
+#| "server itself (which signs the packages) or against a compromise of the "
+#| "key used to sign the Release files. In any case, this mechanism can "
+#| "complement a per-package signature."
msgid ""
-"However, it does not defend against a compromise of the Debian master server "
-"itself (which signs the packages) or against a compromise of the key used to "
-"sign the Release files. In any case, this mechanism can complement a per-"
-"package signature."
+"However, it does not defend against a compromise of the master server itself "
+"(which signs the packages) or against a compromise of the key used to sign "
+"the Release files. In any case, this mechanism can complement a per-package "
+"signature."
msgstr ""
"Sin embargo, esto no protege de un servidor maestro de Debian (que firma los "
"paquetes) comprometido o contra una clave usada para firmar los ficheros "
#. type: Content of: <refentry><refsect1><title>
#: apt-secure.8.xml
-msgid "User configuration"
+#, fuzzy
+#| msgid "User configuration"
+msgid "User Configuration"
msgstr "Configuración de usuario"
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "<command>apt-key</command> is the program that manages the list of keys "
+#| "used by apt. It can be used to add or remove keys, although an "
+#| "installation of this release will automatically contain the default "
+#| "Debian archive signing keys used in the Debian package repositories."
msgid ""
"<command>apt-key</command> is the program that manages the list of keys used "
-"by apt. It can be used to add or remove keys, although an installation of "
-"this release will automatically contain the default Debian archive signing "
-"keys used in the Debian package repositories."
+"by APT to trust repositories. It can be used to add or remove keys as well "
+"as list the trusted keys. Limiting which key(s) are able to sign which "
+"archive is possible via the <option>Signed-By</option> in &sources-list;."
msgstr ""
"<command>apt-key</command> es el programa que gestiona la lista de claves "
"usadas por apt. Se puede usar para añadir o eliminar claves, aunque la "
"predeterminadas del archivo de Debian que se usan en los repositorios de "
"paquetes de Debian."
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+msgid ""
+"Note that a default installation already contains all keys to securely "
+"acquire packages from the default repositories, so fiddling with "
+"<command>apt-key</command> is only needed if third-party repositories are "
+"added."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
msgid ""
#. type: Content of: <refentry><refsect1><title>
#: apt-secure.8.xml
-msgid "Archive configuration"
+#, fuzzy
+#| msgid "Archive configuration"
+msgid "Archive Configuration"
msgstr "Configuración del archivo"
#. type: Content of: <refentry><refsect1><para>
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "<emphasis>Publish the key fingerprint</emphasis>, that way your users "
+#| "will know what key they need to import in order to authenticate the files "
+#| "in the archive."
msgid ""
-"<emphasis>Publish the key fingerprint</emphasis>, that way your users will "
+"<emphasis>Publish the key fingerprint</emphasis>, so that your users will "
"know what key they need to import in order to authenticate the files in the "
-"archive."
+"archive. It is best to ship your key in its own keyring package like "
+"&keyring-distro; does with &keyring-package; to be able to distribute "
+"updates and key transitions automatically later."
msgstr ""
"<emphasis>Publicar la huella digital de la clave</emphasis>, de modo que los "
"usuarios conozcan qué clave necesitan importar para autenticar los ficheros "
"del archivo."
+#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
+#: apt-secure.8.xml
+msgid ""
+"<emphasis>Provide instructions on how to add your archive and key</"
+"emphasis>. If your users can't acquire your key securely the chain of trust "
+"described above is broken. How you can help users add your key depends on "
+"your archive and target audience ranging from having your keyring package "
+"included in another archive users already have configured (like the default "
+"repositories of their distribution) to leveraging the web of trust."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
msgid ""
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "For more background information you might want to review the <ulink url="
+#| "\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
+#| "Security Infrastructure</ulink> chapter of the Securing Debian Manual "
+#| "(available also in the harden-doc package) and the <ulink url=\"http://"
+#| "www.cryptnet.net/fdp/crypto/strong_distro.html\" >Strong Distribution "
+#| "HOWTO</ulink> by V. Alex Brennen."
msgid ""
"For more background information you might want to review the <ulink url="
-"\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
-"Security Infrastructure</ulink> chapter of the Securing Debian Manual "
-"
(available also in the harden-doc package) and the <ulink url=\"http://www."
+"\"https://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
+"Security Infrastructure</ulink> chapter of the Securing Debian Manual (also "
+"
available in the harden-doc package) and the <ulink url=\"http://www."
"cryptnet.net/fdp/crypto/strong_distro.html\" >Strong Distribution HOWTO</"
"ulink> by V. Alex Brennen."
msgstr ""
"El fichero de configuración principal definido por <literal>Dir::Etc::main</"
"literal>."
+#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"all options set in the binary specific configuration subtree are moved into "
+"the root of the tree."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
#: apt.conf.5.xml
msgid ""
"las arquitecturas externas se añaden al registro mediante <command>dpkg --"
"add-architecture</command>."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"This scope defines which compression formats are supported, how compression "
+"and decompression can be performed if support for this format isn't built "
+"into apt directly and a cost-value indicating how costly it is to compress "
+"something in this format. As an example the following configuration stanza "
+"would allow apt to download and uncompress as well as create and store files "
+"with the low-cost <literal>.reversed</literal> file extension which it will "
+"pass to the command <command>rev</command> without additional commandline "
+"parameters for compression and uncompression:"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><informalexample><programlisting>
+#: apt.conf.5.xml
+#, no-wrap
+msgid ""
+"APT::Compressor::rev {\n"
+"\tName \"rev\";\n"
+"\tExtension \".reversed\";\n"
+"\tBinary \"rev\";\n"
+"\tCompressArg {};\n"
+"\tUncompressArg {};\n"
+"\tCost \"10\";\n"
+"};\n"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
msgid ""
"Default release to install packages from if more than one version is "
"available. Contains release name, codename or release version. Examples: "
-"'stable', 'testing', 'unstable', '&stable-codename;', '&testing-codename;', "
-"'4.0', '5.0*'. See also &apt-preferences;."
+"'stable', 'testing', 'unstable', '&debian-stable-codename;', '&debian-"
+"testing-codename;', '4.0', '5.0*'. See also &apt-preferences;."
msgstr ""
"La versión predeterminada de la que se instalarán los paquetes, si hay más "
"de una versión disponible. Contiene el nombre de la versión, ya sea el "
"nombre en código o el número de la versión. Por ejemplo: «stable», "
-"«testing», «unstable», «&stable-codename;», «&testing-codename;», «4.0», "
-"«5.0*». Consulte también &apt-preferences;."
+"«testing», «unstable», «&debian-stable-codename;», «&debian-testing-"
+"codename;», «4.0», «5.0*». Consulte también &apt-preferences;."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
#: apt.conf.5.xml
msgid ""
"<literal>Acquire::http::Proxy-Auto-Detect</literal> can be used to specify "
-"an external command to discover the http proxy to use. Apt expects the "
-"command to output the proxy on stdout in the style <literal>http://proxy:"
-"port/</literal>. This will override the generic <literal>Acquire::http::"
-"Proxy</literal> but not any specific host proxy configuration set via "
-"<literal>Acquire::http::Proxy::$HOST</literal>. See the &squid-deb-proxy-"
-"client; package for an example implementation that uses avahi. This option "
-"takes precedence over the legacy option name <literal>ProxyAutoDetect</"
-"literal>."
+"an external command to discover the http proxy to use. The first and only "
+"parameter is an URI denoting the host to be contacted to allow for host-"
+"specific configuration. APT expects the command to output the proxy on "
+"stdout as a single line in the style <literal>http://proxy:port/</literal> "
+"or the word <literal>DIRECT</literal> if no proxy should be used. No output "
+"indicates that the generic proxy settings should be used. Note that auto-"
+"detection will not be used for a host if a host-specific proxy configuration "
+"is already set via <literal>Acquire::http::Proxy::<replaceable>HOST</"
+"replaceable></literal>. See the &squid-deb-proxy-client; package for an "
+"example implementation that uses avahi. This option takes precedence over "
+"the legacy option name <literal>ProxyAutoDetect</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "List of compression types which are understood by the acquire methods. "
+#| "Files like <filename>Packages</filename> can be available in various "
+#| "compression formats. By default the acquire methods can decompress "
+#| "<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
+#| "command> compressed files; with this setting more formats can be added on "
+#| "the fly or the used method can be changed. The syntax for this is: "
+#| "<placeholder type=\"synopsis\" id=\"0\"/>"
msgid ""
"List of compression types which are understood by the acquire methods. "
"Files like <filename>Packages</filename> can be available in various "
-"compression formats. By default the acquire methods can decompress "
-"<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
-"command> compressed files; with this setting more formats can be added on "
-"the fly or the used method can be changed. The syntax for this is: "
-"<placeholder type=\"synopsis\" id=\"0\"/>"
+"compression formats. By default the acquire methods can decompress and "
+"recompress many common formats like <command>xz</command> and <command>gzip</"
+"command>; with this scope the supported formats can be queried, modified as "
+"well as support for more formats added (see also <option>APT::Compressor</"
+"
option>). The syntax for this is: <placeholder type=\"synopsis\" id=\"0\"/>"
msgstr ""
"Lista de los tipos de compresión que se pueden usar en los métodos de "
"«acquire». Los ficheros como <filename>Packages</filename> pueden estar "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
#: apt.conf.5.xml
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
+#, fuzzy, no-wrap
+#| msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
+msgid "Acquire::CompressionTypes::Order { \"xz\"; \"gz\"; };"
msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "Also, the <literal>Order</literal> subgroup can be used to define in "
+#| "which order the acquire system will try to download the compressed files. "
+#| "The acquire system will try the first and proceed with the next "
+#| "compression type in this list on error, so to prefer one over the other "
+#| "type simply add the preferred type first - default types not already "
+#| "added will be implicitly appended to the end of the list, so e.g. "
+#| "<placeholder type=\"synopsis\" id=\"0\"/> can be used to prefer "
+#| "<command>gzip</command> compressed files over <command>bzip2</command> "
+#| "and <command>lzma</command>. If <command>lzma</command> should be "
+#| "preferred over <command>gzip</command> and <command>bzip2</command> the "
+#| "configure setting should look like this: <placeholder type=\"synopsis\" "
+#| "id=\"1\"/> It is not needed to add <literal>bz2</literal> to the list "
+#| "explicitly as it will be added automatically."
msgid ""
"Also, the <literal>Order</literal> subgroup can be used to define in which "
"order the acquire system will try to download the compressed files. The "
"acquire system will try the first and proceed with the next compression type "
"in this list on error, so to prefer one over the other type simply add the "
-"preferred type first - default types not already added will be implicitly "
-"appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
-"\"0\"/> can be used to prefer <command>gzip</command> compressed files over "
-"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</"
-"command> should be preferred over <command>gzip</command> and "
-"<command>bzip2</command> the configure setting should look like this: "
-"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add "
-"<literal>bz2</literal> to the list explicitly as it will be added "
-"automatically."
+"preferred type first - types not already added will be implicitly appended "
+"to the end of the list, so e.g. <placeholder type=\"synopsis\" id=\"0\"/> "
+"can be used to prefer <command>gzip</command> compressed files over all "
+"other compression formats. If <command>xz</command> should be preferred "
+"over <command>gzip</command> and <command>bzip2</command> the configure "
+"setting should look like this: <placeholder type=\"synopsis\" id=\"1\"/> It "
+"is not needed to add <literal>bz2</literal> to the list explicitly as it "
+"will be added automatically."
msgstr ""
"El subgrupo <literal>Order</literal> también se puede usar para definir en "
"qué orden el sistema de «acquire» intentará descargar los ficheros "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
+#| "literal> will be checked at run time. If this option has been set, the "
+#| "method will only be used if this file exists; e.g. for the "
+#| "<literal>bzip2</literal> method (the inbuilt) setting is: <placeholder "
+#| "type=\"literallayout\" id=\"0\"/> Note also that list entries specified "
+#| "on the command line will be added at the end of the list specified in the "
+#| "configuration files, but before the default entries. To prefer a type in "
+#| "this case over the ones specified in the configuration files you can set "
+#| "the option direct - not in list style. This will not override the "
+#| "defined list; it will only prefix the list with this type."
msgid ""
"Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
-"literal> will be checked at run time. If this option has been set, the "
-"method will only be used if this file exists; e.g. for the <literal>bzip2</"
-"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout"
-"\" id=\"0\"/> Note also that list entries specified on the command line will "
-"be added at the end of the list specified in the configuration files, but "
-"before the default entries. To prefer a type in this case over the ones "
-"specified in the configuration files you can set the option direct - not in "
-"list style. This will not override the defined list; it will only prefix "
-"the list with this type."
+"literal> will be checked at run time. If this option has been set and "
+"support for this format isn't directly built into apt, the method will only "
+"be used if this file exists; e.g. for the <literal>bzip2</literal> method "
+"(the inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> "
+"Note also that list entries specified on the command line will be added at "
+"the end of the list specified in the configuration files, but before the "
+"default entries. To prefer a type in this case over the ones specified in "
+"the configuration files you can set the option direct - not in list style. "
+"This will not override the defined list; it will only prefix the list with "
+"this type."
msgstr ""
"Tenga en cuenta que <literal>Dir::Bin::<replaceable>método</replaceable></"
"literal> se comprueba en tiempo de ejecución. Si se define esta opción, el "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
-"Allow the update operation to load data files from a repository without a "
-"trusted signature. If enabled this option no data files will be loaded and "
-"the update operation fails with a error for this source. The default is "
-"false for backward compatibility. This will be changed in the future."
+"Allow update operations to load data files from repositories without "
+"sufficient security information. The default value is \"<literal>false</"
+"literal>\". Concept, implications as well as alternatives are detailed in "
+"&apt-secure;."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"Allow update operations to load data files from repositories which provide "
+"security information, but these are deemed no longer cryptographically "
+"strong enough. The default value is \"<literal>false</literal>\". Concept, "
+"implications as well as alternatives are detailed in &apt-secure;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
"Allow that a repository that was previously gpg signed to become unsigned "
-"durign a update operation. When there is no valid signature of a perviously "
-"trusted repository apt will refuse the update. This option can be used to "
-"override this protection. You almost certainly never want to enable this. "
-"The default is false. Note that apt will still consider packages from this "
-"source untrusted and warn about them if you try to install them."
+"during an update operation. When there is no valid signature for a "
+"previously trusted repository apt will refuse the update. This option can be "
+"used to override this protection. You almost certainly never want to enable "
+"this. The default is <literal>false</literal>. Concept, implications as "
+"well as alternatives are detailed in &apt-secure;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
"<literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</"
"replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
"Origin::<replaceable>ORIGIN</replaceable></literal>. The value should be a "
-"normal URI to a text file, expect that package specific data is replaced "
-"with the placeholder <literal>CHANGEPATH</literal>. The value for it is: 1. "
-"if the package is from a component (e.g. <literal>main</literal>) this is "
-"the first part otherwise it is omitted, 2. the first letter of source "
-"package name, expect if the source package name starts with '<literal>lib</"
+"normal URI to a text file, except that package specific data is replaced "
+"with the placeholder <literal>@CHANGEPATH@</literal>. The value for it is: "
+"1. if the package is from a component (e.g. <literal>main</literal>) this "
+"is the first part otherwise it is omitted, 2. the first letter of source "
+"package name, except if the source package name starts with '<literal>lib</"
"literal>' in which case it will be the first four letters. 3. The complete "
"source package name. 4. the complete name again and 5. the source version. "
"The first (if present), second, third and fourth part are separated by a "
"available in this case."
msgstr ""
+#. type: Content of: <refentry><refsect1><title>
+#: apt.conf.5.xml
+#, fuzzy
+#| msgid "User configuration"
+msgid "Binary specific configuration"
+msgstr "Configuración de usuario"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.conf.5.xml
+msgid ""
+"Especially with the introduction of the <command>apt</command> binary it can "
+"be useful to set certain options only for a specific binary as even options "
+"which look like they would effect only a certain binary like <option>APT::"
+"Get::Show-Versions</option> effect <command>apt-get</command> as well as "
+"<command>apt</command>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.conf.5.xml
+msgid ""
+"Setting an option for a specific binary only can be achieved by setting the "
+"option inside the <option>Binary::<replaceable>specific-binary</"
+"replaceable></option> scope. Setting the option <option>APT::Get::Show-"
+"Versions</option> for the <command>apt</command> only can e.g. by done by "
+"setting <option>Binary::apt::APT::Get::Show-Versions</option> instead."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.conf.5.xml
+msgid ""
+"Note that as seen in the DESCRIPTION section further above you can't set "
+"binary-specific options on the commandline itself nor in configuration files "
+"loaded via the commandline."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><title>
#: apt.conf.5.xml
msgid "Directories"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
-"Package action lines consist of five fields in Version 2: old version, "
-"direction of version change (< for upgrades, > for downgrades, = for "
-"no change), new version, action. The version fields are \"-\" for no version "
-"at all (for example when installing a package for the first time; no version "
-"is treated as earlier than any real version, so that is an upgrade, "
-"indicated as <literal>- < 1.23.4</literal>). The action field is "
-"\"**CONFIGURE**\" if the package is being configured, \"**REMOVE**\" if it "
-"is being removed, or the filename of a .deb file if it is being unpacked."
+"Package action lines consist of five fields in Version 2: package name "
+"(without architecture qualification even if foreign), old version, direction "
+"of version change (< for upgrades, > for downgrades, = for no change), "
+"new version, action. The version fields are \"-\" for no version at all (for "
+"example when installing a package for the first time; no version is treated "
+"as earlier than any real version, so that is an upgrade, indicated as "
+"<literal>- < 1.23.4</literal>). The action field is \"**CONFIGURE**\" if "
+"the package is being configured, \"**REMOVE**\" if it is being removed, or "
+"the filename of a .deb file if it is being unpacked."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
msgid ""
"In Version 3 after each version field follows the architecture of this "
"version, which is \"-\" if there is no version, and a field showing the "
-"MultiArch type \"same\", foreign\", \"allowed\" or \"none\". Note that \"none"
-"\" is an incorrect typename which is just kept to remain compatible, it "
-"should be read as \"no\" and users are encouraged to support both."
+"MultiArch type \"same\", \"foreign\", \"allowed\" or \"none\". Note that "
+"\"none\" is an incorrect typename which is just kept to remain compatible, "
+"it should be read as \"no\" and users are encouraged to support both."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
"el comportamiento predeterminado se limita a deshabilitar el firmado de "
"paquetes y a producir todos los binarios."
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt.conf.5.xml
-msgid "dpkg trigger usage (and related options)"
-msgstr "Uso del disparador de dpkg (y de las opciones relacionadas)"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml
-msgid ""
-"APT can call &dpkg; in such a way as to let it make aggressive use of "
-"triggers over multiple calls of &dpkg;. Without further options &dpkg; will "
-"use triggers once each time it runs. Activating these options can therefore "
-"decrease the time needed to perform the install or upgrade. Note that it is "
-"intended to activate these options per default in the future, but as it "
-"drastically changes the way APT calls &dpkg; it needs a lot more testing. "
-"<emphasis>These options are therefore currently experimental and should not "
-"be used in production environments.</emphasis> It also breaks progress "
-"reporting such that all front-ends will currently stay around half (or more) "
-"of the time in the 100% state while it actually configures all packages."
-msgstr ""
-"APT puede invocar &dpkg; de forma que pueda hacer un uso agresivo de los "
-"disparadores («triggers») mediante varias invocaciones a &dpkg;. Sin no se "
-"definen más opciones, &dpkg; utilizará los disparadores una durante su "
-"ejecución. Si se activan estas opciones, se puede reducir el tiempo "
-"necesario para realizar la instalación o la actualización. Tenga en cuenta "
-"que está diseñado para que estas opciones se activen de forma predeterminada "
-"en un futuro, pero debido a los cambios drásticos en la manera en que APT "
-"invoca a &dpkg;, necesita más pruebas. <emphasis>Actualmente, estas opciones "
-"son experimentales, y no se deberían usar en entornos de producción.</"
-"emphasis> También provoca un fallo en el informe de progreso, con lo que "
-"todas las interfaces muestran un progreso del 100% durante la mitad del "
-"tiempo (o más) durante la configuración de todos los paquetes."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><literallayout>
-#: apt.conf.5.xml
-#, no-wrap
-msgid ""
-"DPkg::NoTriggers \"true\";\n"
-"PackageManager::Configure \"smart\";\n"
-"DPkg::ConfigurePending \"true\";\n"
-"DPkg::TriggersPending \"true\";"
-msgstr ""
-"DPkg::NoTriggers \"true\";\n"
-"PackageManager::Configure \"smart\";\n"
-"DPkg::ConfigurePending \"true\";\n"
-"DPkg::TriggersPending \"true\";"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml
-msgid ""
-"Note that it is not guaranteed that APT will support these options or that "
-"these options will not cause (big) trouble in the future. If you have "
-"understand the current risks and problems with these options, but are brave "
-"enough to help testing them, create a new configuration file and test a "
-"combination of options. Please report any bugs, problems and improvements "
-"you encounter and make sure to note which options you have used in your "
-"reports. Asking &dpkg; for help could also be useful for debugging proposes, "
-"see e.g. <command>dpkg --audit</command>. A defensive option combination "
-"would be <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-"Tenga en cuenta que no se garantiza que APT permitirá usar estas opciones o "
-"que estas opciones no causen un (gran) problema en el futuro. Si ha "
-"entendido los riesgos y los problemas actuales con estas opciones pero es lo "
-"suficientemente valiente para ayudar a probarlas, cree un nuevo fichero de "
-"configuración y pruebe una combinación de las opciones. Por favor, informe "
-"de cualquier error, problema o mejora que encuentre y asegúrese de apuntar "
-"en sus informes qué opciones ha usado. Pedir ayuda a &dpkg; también puede "
-"ser útil por motivos de depuración, véase por ejemplo: <command>dpkg --"
-"audit</command>. Una combinación de opciones defensivas sería <placeholder "
-"type=\"literallayout\" id=\"0\"/>"
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml
-msgid ""
-"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending "
-"call). See &dpkg; if you are interested in what this actually means. In "
-"short: &dpkg; will not run the triggers when this flag is present unless it "
-"is explicitly called to do so in an extra call. Note that this option "
-"exists (undocumented) also in older APT versions with a slightly different "
-"meaning: Previously these option only append --no-triggers to the configure "
-"calls to &dpkg; - now APT will also add this flag to the unpack and remove "
-"calls."
-msgstr ""
-"Añade a todas las invocaciones a &dpkg; la opción sin disparadores («no "
-"triggers»), excepto a la invocación a «ConfigurePending». Consulte &dpkg; si "
-"está interesado en saber qué significa esto. De forma breve: &dpkg; no "
-"ejecuta los disparadores cuando está opción está presente a menos que se "
-"ejecute explícitamente con una invocación adicional. Tenga en cuenta que "
-"esta opción también existe en versiones antiguas de APT (aunque sin "
-"documentar) con un significado diferente. Anteriormente sólo se añadía la "
-"opción «--no-triggers» a las invocaciones de la configuración para &dpkg;, "
-"ahora APT también añade esta opción a las invocaciones de desempaquetado y "
-"eliminación."
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml
-msgid ""
-"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
-"and \"<literal>no</literal>\". The default value is \"<literal>all</literal>"
-"\", which causes APT to configure all packages. The \"<literal>smart</"
-"literal>\" way is to configure only packages which need to be configured "
-"before another package can be unpacked (Pre-Depends), and let the rest be "
-"configured by &dpkg; with a call generated by the ConfigurePending option "
-"(see below). On the other hand, \"<literal>no</literal>\" will not configure "
-"anything, and totally relies on &dpkg; for configuration (which at the "
-"moment will fail if a Pre-Depends is encountered). Setting this option to "
-"any value other than <literal>all</literal> will implicitly also activate "
-"the next option by default, as otherwise the system could end in an "
-"unconfigured and potentially unbootable state."
-msgstr ""
-"Los valores válidos son «<literal>all</literal>», «<literal>smart</"
-"literal>» y «<literal>no</literal>». El valor predeterminado es "
-"«<literal>all</literal>», que hace que APT configure todos los paquetes. El "
-"valor «<literal>smart</literal>» sólo configura los paquetes que requieren "
-"ser configurados antes de que se desempaquete otro paquete (predependencia) "
-"y permite que &dpkg; configure los restantes con una invocación generada por "
-"la opción «ConfigurePending» (más abajo). El valor «<literal>no</literal>» "
-"no configura nada y depende por completo de &dpkg; para la configuración "
-"(que fallará si se encuentra una pre-dependencia). Si se define esta opción "
-"con un valor distinto a «<literal>all</literal>» activa implícitamente la "
-"siguiente opción de forma predeterminada, ya que de otro modo el sistema "
-"podría terminar en un estado mal configurado qué podría derivar en la "
-"imposibilidad de arrancar el sistema. "
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "If this option is set APT will call <command>dpkg --configure --pending</"
+#| "command> to let &dpkg; handle all required configurations and triggers. "
+#| "This option is activated automatically per default if the previous option "
+#| "is not set to <literal>all</literal>, but deactivating it could be useful "
+#| "if you want to run APT multiple times in a row - e.g. in an installer. In "
+#| "these sceneries you could deactivate this option in all but the last run."
msgid ""
"If this option is set APT will call <command>dpkg --configure --pending</"
"command> to let &dpkg; handle all required configurations and triggers. This "
-"option is activated automatically per default if the previous option is not "
-"set to <literal>all</literal>, but deactivating it could be useful if you "
-"want to run APT multiple times in a row - e.g. in an installer. In these "
-"sceneries you could deactivate this option in all but the last run."
+"option is activated by default, but deactivating it could be useful if you "
+"want to run APT multiple times in a row - e.g. in an installer. In this "
+"scenario you could deactivate this option in all but the last run."
msgstr ""
"Si define esta opción, APT ejecutará <command>dpkg --configure --pending</"
"command> para permitir a dpkg manejar todas las configuraciones necesarias y "
"veces seguidas, por ejemplo: en un instalador. En estas situaciones podría "
"desactivar esta opción en todas las ejecuciones menos la última."
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml
-msgid ""
-"Useful for the <literal>smart</literal> configuration as a package which has "
-"pending triggers is not considered as <literal>installed</literal>, and "
-"&dpkg; treats them as <literal>unpacked</literal> currently which is a "
-"showstopper for Pre-Dependencies (see debbugs #526774). Note that this will "
-"process all triggers, not only the triggers needed to configure this package."
-msgstr ""
-"Útil para una configuración <literal>smart</literal> en la que un paquete "
-"que tiene disparadores pendientes no se considera como <literal>instalado</"
-"literal> y que dpkg lo trata como <literal>desempaquetado</literal>, lo cual "
-"entra en conflicto con el sistema de pre-dependencias (véase debbugs "
-"#526774). Tenga en cuenta que esto procesará todos los disparadores, no sólo "
-"los disparadores necesarios para configurar este paquete."
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml
-#, no-wrap
-msgid ""
-"OrderList::Score {\n"
-"\tDelete 500;\n"
-"\tEssential 200;\n"
-"\tImmediate 10;\n"
-"\tPreDepends 50;\n"
-"};"
-msgstr ""
-"OrderList::Score {\n"
-"\tDelete 500;\n"
-"\tEssential 200;\n"
-"\tImmediate 10;\n"
-"\tPreDepends 50;\n"
-"};"
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml
-msgid ""
-"Essential packages (and their dependencies) should be configured immediately "
-"after unpacking. It is a good idea to do this quite early in the upgrade "
-"process as these configure calls also currently require <literal>DPkg::"
-"TriggersPending</literal> which will run quite a few triggers (which may not "
-"be needed). Essentials get per default a high score but the immediate flag "
-"is relatively low (a package which has a Pre-Depends is rated higher). "
-"These option and the others in the same group can be used to change the "
-"scoring. The following example shows the settings with their default "
-"values. <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-"Los paquetes esenciales (y sus dependencias) se deberían configurar "
-"inmediatamente después de desempaquetarlos. Se recomienda realizarlo lo más "
-"pronto posible en el proceso de actualización ya que actualmente estas "
-"invocaciones de configuración también necesitan <literal>DPkg::"
-"TriggersPending</literal>, que ejecuta varios disparadores (que puede que no "
-"sean necesarios). Los esenciales tienen, de forma predeterminada, una "
-"puntuación alta pero la opción inmediata es relativamente baja (un paquete "
-"que tenga pre-dependencias tiene una puntuación más alta). Puede cambiar la "
-"puntuación mediante esta opción y las otras del mismo grupo. El siguiente "
-"ejemplo muestra la configuración con los valores predeterminados. "
-"<placeholder type=\"literallayout\" id=\"0\"/>"
-
#. type: Content of: <refentry><refsect1><title>
#: apt.conf.5.xml
msgid "Periodic and Archives options"
msgid ""
"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups "
"of options configure behavior of apt periodic updates, which is done by the "
-"<literal>/etc/cron.daily/apt</literal> script. See the top of this script "
-"for the brief documentation of these options."
+"<literal>/usr/lib/apt/apt.systemd.daily</literal> script. See the top of "
+"this script for the brief documentation of these options."
msgstr ""
"Los grupos de opciones <literal>APT::Periodic</literal> y <literal>APT::"
"Archives</literal> configuran el comportamiento de las actualizaciones "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml apt_preferences.5.xml sources.list.5.xml
-#: apt-ftparchive.1.xml
+#: apt.conf.5.xml apt_preferences.5.xml sources.list.5.xml apt-ftparchive.1.xml
msgid "Examples"
msgstr "Ejemplos"
#: apt_preferences.5.xml
msgid ""
"The following record assigns a high priority to all package versions "
-"belonging to any distribution whose Codename is \"<literal>&testing-codename;"
-"</literal>\"."
+"belonging to any distribution whose Codename is \"<literal>&debian-testing-"
+"codename;</literal>\"."
msgstr ""
"El siguiente registro asigna una prioridad alta a todas las versiones de los "
"paquetes pertenecientes a cualquier distribución que tenga como nombre clave "
-"«<literal>&testing-codename;</literal>»."
+"«<literal>&debian-testing-codename;</literal>»."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
#: apt_preferences.5.xml
#, no-wrap
msgid ""
"Package: *\n"
-"Pin: release n=&testing-codename;\n"
+"Pin: release n=&debian-testing-codename;\n"
"Pin-Priority: 900\n"
msgstr ""
"Package: *\n"
-"Pin: release n=&testing-codename;\n"
+"Pin: release n=&debian-testing-codename;\n"
"Pin-Priority: 900\n"
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
msgid ""
"The following record assigns a high priority to all package versions "
"belonging to any release whose Archive name is \"<literal>stable</literal>\" "
-"and whose release Version number is \"<literal>&stable-version;</literal>\"."
+"and whose release Version number is \"<literal>&debian-stable-version;</"
+"literal>\"."
msgstr ""
"El siguiente registro asigna una prioridad alta a todas las versiones de los "
"paquetes pertenecientes a cualquier publicación que tenga como nombre de "
"archivo de paquetes «<literal>stable</literal>» y como número de versión "
-"«<literal>&stable-version;</literal>»."
+"«<literal>&debian-stable-version;</literal>»."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
#: apt_preferences.5.xml
#, no-wrap
msgid ""
"Package: *\n"
-"Pin: release a=stable, v=&stable-version;\n"
+"Pin: release a=stable, v=&debian-stable-version;\n"
"Pin-Priority: 500\n"
msgstr ""
"Package: *\n"
-"Pin: release a=stable, v=&stable-version;\n"
+"Pin: release a=stable, v=&debian-stable-version;\n"
"Pin-Priority: 500\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
"The <filename>Release</filename> file is normally found in the directory "
"<filename>.../dists/<replaceable>dist-name</replaceable></filename>: for "
"example, <filename>.../dists/stable/Release</filename>, or <filename>.../"
-"dists/&stable-codename;/Release</filename>. It consists of a single multi-"
-"line record which applies to <emphasis>all</emphasis> of the packages in the "
-"directory tree below its parent. Unlike the <filename>Packages</filename> "
-"file, nearly all of the lines in a <filename>Release</filename> file are "
-"relevant for setting APT priorities:"
+"dists/&debian-stable-codename;/Release</filename>. It consists of a single "
+"multi-line record which applies to <emphasis>all</emphasis> of the packages "
+"in the directory tree below its parent. Unlike the <filename>Packages</"
+"filename> file, nearly all of the lines in a <filename>Release</filename> "
+"file are relevant for setting APT priorities:"
msgstr ""
"El fichero <filename>Release</filename> se suele encontrar en el directorio "
"<filename>.../dists/<replaceable>nombre-dist</replaceable></filename>, por "
"ejemplo <filename>.../dists/stable/Release</filename> o <filename>.../dists/"
-"&stable-codename;/Release</filename>. El fichero consiste en registros de "
-"una sola línea que se aplican a <emphasis>todos</emphasis> los paquetes por "
-"debajo del directorio padre. Al contrario que el fichero <filename>Packages</"
-"filename>, casi todas las líneas del fichero <filename>Release</filename> "
-"son relevantes para las prioridades de APT:"
+"&debian-stable-codename;/Release</filename>. El fichero consiste en "
+"registros de una sola línea que se aplican a <emphasis>todos</emphasis> los "
+"paquetes por debajo del directorio padre. Al contrario que el fichero "
+"<filename>Packages</filename>, casi todas las líneas del fichero "
+"<filename>Release</filename> son relevantes para las prioridades de APT:"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
#: apt_preferences.5.xml
#: apt_preferences.5.xml
msgid ""
"names the codename to which all the packages in the directory tree belong. "
-"For example, the line \"Codename: &testing-codename;\" specifies that all of "
-"the packages in the directory tree below the parent of the "
-"<filename>Release</filename> file belong to a version named "
-"<literal>&testing-codename;</literal>. Specifying this value in the APT "
-"preferences file would require the line:"
+"For example, the line \"Codename: &debian-testing-codename;\" specifies that "
+"all of the packages in the directory tree below the parent of the "
+"<filename>Release</filename> file belong to a version named <literal>&debian-"
+"testing-codename;</literal>. Specifying this value in the APT preferences "
+"file would require the line:"
msgstr ""
"indica el nombre de la distribución a la que pertenecen todos los paquetes "
-"del árbol de directorios. Por ejemplo, la línea «Codename: &testing-"
+"del árbol de directorios. Por ejemplo, la línea «Codename: &debian-testing-"
"codename;» especifica que todos los paquetes en el árbol de directorios por "
"debajo del directorio padre marcado en el fichero <filename>Release</"
-"filename> pertenecen a la versión llamada <literal>&testing-codename;</"
-"literal>. Para especificar una preferencia de acuerdo con este parámetro "
+"filename> pertenecen a la versión llamada <literal>&debian-testing-codename;"
+"</literal>. Para especificar una preferencia de acuerdo con este parámetro "
"tendrá que poner una de las siguientes líneas en el fichero de preferencias "
"de APT:"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
#: apt_preferences.5.xml
#, no-wrap
-msgid "Pin: release n=&testing-codename;\n"
-msgstr "Pin: release n=&testing-codename;\n"
+msgid "Pin: release n=&debian-testing-codename;\n"
+msgstr "Pin: release n=&debian-testing-codename;\n"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
#: apt_preferences.5.xml
msgid ""
"names the release version. For example, the packages in the tree might "
-"belong to Debian release version &stable-version;. Note that there is "
-"normally no version number for the <literal>testing</literal> and "
+"belong to Debian release version &debian-stable-version;. Note that there "
+"is normally no version number for the <literal>testing</literal> and "
"<literal>unstable</literal> distributions because they have not been "
"released yet. Specifying this in the APT preferences file would require one "
"of the following lines."
msgstr ""
"nombra la versión de la publicación. Por ejemplo, los paquetes en el árbol "
-"pueden pertenecer a la versión &stable-version; de Debian. Observe que, "
-"generalmente, <literal>testing</literal> y <literal>unstable</literal> no "
-"tienen una versión asignada porque no se han publicado. Para especificar una "
-"preferencia de acuerdo con este parámetro tendrá que poner una de las "
+"pueden pertenecer a la versión &debian-stable-version; de Debian. Observe "
+"que, generalmente, <literal>testing</literal> y <literal>unstable</literal> "
+"no tienen una versión asignada porque no se han publicado. Para especificar "
+"una preferencia de acuerdo con este parámetro tendrá que poner una de las "
"siguientes línea en el fichero de preferencias de APT:"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
#: apt_preferences.5.xml
#, no-wrap
msgid ""
-"Pin: release v=&stable-version;\n"
-"Pin: release a=stable, v=&stable-version;\n"
-"Pin: release &stable-version;\n"
+"Pin: release v=&debian-stable-version;\n"
+"Pin: release a=stable, v=&debian-stable-version;\n"
+"Pin: release &debian-stable-version;\n"
msgstr ""
-"Pin: release v=&stable-version;\n"
-"Pin: release a=stable, v=&stable-version;\n"
-"Pin: release &stable-version;\n"
+"Pin: release v=&debian-stable-version;\n"
+"Pin: release a=stable, v=&debian-stable-version;\n"
+"Pin: release &debian-stable-version;\n"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
#: apt_preferences.5.xml
#, no-wrap
msgid ""
"Explanation: Uninstall or do not install any Debian-originated package versions\n"
-"Explanation: other than those in the distribution codenamed with &testing-codename; or sid\n"
+"Explanation: other than those in the distribution codenamed with &debian-testing-codename; or sid\n"
"Package: *\n"
-"Pin: release n=&testing-codename;\n"
+"Pin: release n=&debian-testing-codename;\n"
"Pin-Priority: 900\n"
"\n"
"Explanation: Debian unstable is always codenamed with sid\n"
"Explanation: Eliminar o no instalar cualquier paquete de Debian cuya versión sea\n"
"Explanation: distinta a aquellos en las distribuciones de nombre squeeze o sid\n"
"Package: *\n"
-"Pin: release n=&testing-codename;\n"
+"Pin: release n=&debian-testing-codename;\n"
"Pin-Priority: 900\n"
"\n"
"Explanation: El nombre clave de Debian «unstable» siempre es sid\n"
msgid ""
"With a suitable &sources-list; file and the above preferences file, any of "
"the following commands will cause APT to upgrade to the latest version(s) in "
-"the release codenamed with <literal>&testing-codename;</literal>. "
+"the release codenamed with <literal>&debian-testing-codename;</literal>. "
"<placeholder type=\"programlisting\" id=\"0\"/>"
msgstr ""
"Con un fichero «&sources-list;» adecuado y el fichero de preferencias "
"mostrado anteriormente, cualquiera de las siguientes órdenes provocará que "
"APT actualice los paquetes a la última versión de la distribución llamada "
-"<literal>&testing-codename;</literal>. <placeholder type=\"programlisting\" "
-"id=\"0\"/>"
+"<literal>&debian-testing-codename;</literal>. <placeholder type="
+"\"programlisting\" id=\"0\"/>"
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
#: apt_preferences.5.xml
"The following command will cause APT to upgrade the specified package to the "
"latest version from the <literal>sid</literal> distribution. Thereafter, "
"<command>apt-get upgrade</command> will upgrade the package to the most "
-"recent <literal>&testing-codename;</literal> version if that is more recent "
-"than the installed version, otherwise, to the most recent <literal>sid</"
-"literal> version if that is more recent than the installed version. "
-"<placeholder type=\"programlisting\" id=\"0\"/>"
+"recent <literal>&debian-testing-codename;</literal> version if that is more "
+"recent than the installed version, otherwise, to the most recent "
+"<literal>sid</literal> version if that is more recent than the installed "
+"
version. <placeholder type=\"programlisting\" id=\"0\"/>"
msgstr ""
"La siguiente orden hace que APT actualice un determinado paquete a la última "
"versión de la distribución <literal>sid</literal>. Más tarde, <command>apt-"
"get upgrade</command> actualizará el paquete a la última versión de la "
-"distribución<literal>&testing-codename;</literal> si es más reciente que la "
-"versión instalada. De otro modo, se instalará la versión más reciente de la "
-"distribución <literal>sid</literal> si es más reciente que la versión "
+"distribución<literal>&debian-testing-codename;</literal> si es más reciente "
+"que la versión instalada. De otro modo, se instalará la versión más reciente "
+"de la distribución <literal>sid</literal> si es más reciente que la versión "
"instalada. <placeholder type=\"programlisting\" id=\"0\"/>"
#. type: Content of: <refentry><refsect1><para>
#| "by <command>apt-get update</command> (or by an equivalent command from "
#| "another APT front-end)."
msgid ""
-"The source list <filename>/etc/apt/sources.list</filename> and the the files "
+"The source list <filename>/etc/apt/sources.list</filename> and the files "
"contained in <filename>/etc/apt/sources.list.d/</filename> are designed to "
"support any number of active sources and a variety of source media. The "
-"files list one source per line (one line style) or contain multiline stanzas "
+"files list one source per line (one-line style) or contain multiline stanzas "
"defining one or more sources per stanza (deb822 style), with the most "
"preferred source listed first (in case a single version is available from "
"more than one source). The information available from the configured sources "
#. type: Content of: <refentry><refsect1><title>
#: sources.list.5.xml
-msgid "one line style format"
+msgid "One-Line-Style Format"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
"(<literal>[]</literal>) included in the line after the type separated from "
"it with a space. If an option allows multiple values these are separated "
"from each other with a comma (<literal>,</literal>). An option name is "
-"separated from its value(s) by a equal sign (<literal>=</literal>). "
-"Multivalue options have also <literal>-=</literal> and <literal>+=</literal> "
-"as separator which instead of replacing the default with the given value(s) "
-"modify the default value(s) to remove or include the given values."
+"separated from its value(s) by an equals sign (<literal>=</literal>). "
+"Multivalue options also have <literal>-=</literal> and <literal>+=</literal> "
+"as separators, which instead of replacing the default with the given "
+"value(s) modify the default value(s) to remove or include the given values."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
msgid ""
"This is the traditional format and supported by all apt versions. Note that "
"not all options as described below are supported by all apt versions. Note "
-"also that some older applications parsing this format on its own might not "
+"also that some older applications parsing this format on their own might not "
"expect to encounter options as they were uncommon before the introduction of "
"multi-architecture support."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
#: sources.list.5.xml
-msgid "deb822 style format"
+msgid "deb822-Style Format"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
msgid ""
"Files in this format have the extension <filename>.sources</filename>. The "
"format is similar in syntax to other files used by Debian and its "
-"derivatives, like the metadata itself apt will download from the configured "
-"sources or the <filename>debian/control</filename> file in a Debian source "
-"package. Individual entries are separated by an empty line, additional "
-"empty lines are ignored, and a <literal>#</literal> character at the start "
-"of the line marks the entire line as a comment. An entry can hence be "
-"disabled by commenting out each line belonging to the stanza, but it is "
+"derivatives, such as the metadata files that apt will download from the "
+"configured sources or the <filename>debian/control</filename> file in a "
+"Debian source package. Individual entries are separated by an empty line; "
+"additional empty lines are ignored, and a <literal>#</literal> character at "
+"the start of the line marks the entire line as a comment. An entry can hence "
+"be disabled by commenting out each line belonging to the stanza, but it is "
"usually easier to add the field \"Enabled: no\" to the stanza to disable the "
"entry. Removing the field or setting it to yes reenables it. Options have "
"the same syntax as every other field: A fieldname separated by a colon "
"(<literal>:</literal>) and optionally spaces from its value(s). Note "
"especially that multiple values are separated by spaces, not by commas as in "
-"the one line format. Multivalue fields like <literal>Architectures</literal> "
+"the one-line format. Multivalue fields like <literal>Architectures</literal> "
"also have <literal>Architectures-Add</literal> and <literal>Architectures-"
"Remove</literal> to modify the default value rather than replacing it."
msgstr ""
msgid ""
"This is a new format supported by apt itself since version 1.1. Previous "
"versions ignore such files with a notice message as described earlier. It "
-"is intended to make this format gradually the default format and deprecating "
-"the previously described one line style format as it is easier to create, "
-"extend and modify by humans and machines alike especially if a lot of "
+"is intended to make this format gradually the default format, deprecating "
+"the previously described one-line-style format, as it is easier to create, "
+"extend and modify for humans and machines alike especially if a lot of "
"sources and/or options are involved. Developers who are working with and/or "
"parsing apt sources are highly encouraged to add support for this format and "
"to contact the APT team to coordinate and share this work. Users can freely "
-"adopt this format already, but could encounter problems with software not "
+"adopt this format already, but may encounter problems with software not "
"supporting the format yet."
msgstr ""
#: sources.list.5.xml
#, fuzzy
#| msgid "The deb and deb-src types"
-msgid "The deb and deb-src types: General Format"
+msgid "The deb and deb-src Types: General Format"
msgstr "Los tipos «deb» y «deb-src»"
#. type: Content of: <refentry><refsect1><para>
#| "archive, <filename>distribution/component</filename>. The "
#| "<literal>distribution</literal> is generally an archive name like "
#| "<literal>stable</literal> or <literal>testing</literal> or a codename "
-#| "like <literal>&stable-codename;</literal> or <literal>&testing-codename;</"
-#| "literal> while component is one of <literal>main</literal>, "
-#| "<literal>contrib</literal> or <literal>non-free</literal>. The "
+#| "like <literal>&debian-stable-codename;</literal> or <literal>&debian-"
+#| "testing-codename;</literal> while component is one of <literal>main</"
+#| "literal>, <literal>contrib</literal> or <literal>non-free</literal>. The "
#| "<literal>deb-src</literal> type references a Debian distribution's source "
#| "code in the same form as the <literal>deb</literal> type. A <literal>deb-"
#| "src</literal> line is required to fetch source indexes."
"archive, <filename>distribution/component</filename>. The "
"<literal>distribution</literal> is generally a suite name like "
"<literal>stable</literal> or <literal>testing</literal> or a codename like "
-"<literal>&stable-codename;</literal> or <literal>&testing-codename;</"
-"literal> while component is one of <literal>main</literal>, "
+"<literal>&debian-stable-codename;</literal> or <literal>&debian-testing-"
+"codename;</literal> while component is one of <literal>main</literal>, "
"<literal>contrib</literal> or <literal>non-free</literal>. The <literal>deb-"
"src</literal> type references a Debian distribution's source code in the "
"same form as the <literal>deb</literal> type. A <literal>deb-src</literal> "
"de dos niveles, <filename>distribución/componente</filename>. Habitualmente, "
"<literal>distribución</literal> es «<literal>stable</literal>» (estable) o "
"«<literal>testing</literal>» (en pruebas), o un nombre código como "
-"<literal>&stable-codename;</literal> o <literal>&testing-codename;</"
-"literal>, mientras que el componente es <literal>main</literal> (principal), "
-"<literal>contrib</literal>, <literal>non-free</literal> (no libre), o "
-"<literal>non-us</literal>. El tipo <literal>deb-src</literal> hace "
+"<literal>&debian-stable-codename;</literal> o <literal>&debian-testing-"
+"codename;</literal>, mientras que el componente es <literal>main</literal> "
+"(principal), <literal>contrib</literal>, <literal>non-free</literal> (no "
+"libre), o <literal>non-us</literal>. El tipo <literal>deb-src</literal> hace "
"referencia al código fuente de la distribución con la misma sintaxis que el "
"tipo <literal>deb</literal>. Debe insertar una línea <literal>deb-src</"
"literal> para obtener los índices de fuentes."
#| "The format for a <filename>sources.list</filename> entry using the "
#| "<literal>deb</literal> and <literal>deb-src</literal> types is:"
msgid ""
-"The format for two one line style entries using the <literal>deb</literal> "
+"The format for two one-line-style entries using the <literal>deb</literal> "
"and <literal>deb-src</literal> types is:"
msgstr ""
"El formato para una entrada en el fichero <filename>sources.list</filename> "
"literal> which expands to the Debian architecture (such as <literal>amd64</"
"literal> or <literal>armel</literal>) used on the system. This permits "
"architecture-independent <filename>sources.list</filename> files to be used. "
-"In general this is only of interest when specifying an exact path, "
+"In general this is only of interest when specifying an exact path; "
"<literal>APT</literal> will automatically generate a URI with the current "
"architecture otherwise."
msgstr ""
#| "also parallelizes connections to different hosts to more effectively deal "
#| "with sites with low bandwidth."
msgid ""
-"Especially in the one line style format since only one distribution can be "
+"Especially in the one-line-style format since only one distribution can be "
"specified per line it may be necessary to have multiple lines for the same "
"URI, if a subset of all available distributions or components at that "
"location is desired. APT will sort the URI list after it has generated a "
#. type: Content of: <refentry><refsect1><para>
#: sources.list.5.xml
msgid ""
-"As an example, the sources for your distribution could look like this in one "
-"line
style format: <placeholder type=\"literallayout\" id=\"0\"/> or like "
+"As an example, the sources for your distribution could look like this in one-"
+"line
-style format: <placeholder type=\"literallayout\" id=\"0\"/> or like "
"this in deb822 style format: <placeholder type=\"literallayout\" id=\"1\"/>"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
#: sources.list.5.xml
msgid ""
-"Each source entry can have options specified modifying which and how the "
-"source is accessed and data acquired from it. Format, syntax and names of "
-"the options varies between the two formats one line and deb822 style as "
-"described, but they have both the same options available. For simplicity we "
-"list the deb822 fieldname and provide the one line name in brackets. "
-"Remember that beside setting multivalue options explicitly, there is also "
+"Each source entry can have options specified to modify which source is "
+"accessed and how data is acquired from it. Format, syntax and names of the "
+"options vary between the one-line-style and deb822-style formats as "
+"described, but they both have the same options available. For simplicity we "
+"list the deb822 fieldname and provide the one-line name in brackets. "
+"Remember that besides setting multivalue options explicitly, there is also "
"the option to modify them based on the default, but we aren't listing those "
"names explicitly here. Unsupported options are silently ignored by all APT "
"versions."
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+#| "replaceable>,…</literal> can be used to specify for which architectures "
+#| "information should be downloaded. If this option is not set all "
+#| "architectures defined by the <literal>APT::Architectures</literal> option "
+#| "will be downloaded."
msgid ""
"<option>Languages</option> (<option>lang</option>) is a multivalue option "
-"defining for which languages information like translated package "
+"defining for which languages information such as translated package "
"descriptions should be downloaded. If this option isn't set the default is "
"all languages as defined by the <option>Acquire::Languages</option> config "
"option."
msgstr ""
+"<literal>arch=<replaceable>arquitecura1</replaceable>,"
+"<replaceable>arquitecura2</replaceable>,…</literal> se puede utilizar para "
+"definir la arquitectura para la que se descarga información sobre "
+"arquitecturas. Si no se define esta opción, se descargarán todas las "
+"arquitecturas definidas por la opción <literal>APT::Architectures</literal>."
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
#: sources.list.5.xml
"<option>Targets</option> (<option>target</option>) is a multivalue option "
"defining which download targets apt will try to acquire from this source. If "
"not specified, the default set is defined by the <option>Acquire::"
-"IndexTargets</option> configuration scope. Aditionally, specific targets "
-"can be enabled or disabled by using the identifier as field name instead of "
-"using this multivalue option."
+"IndexTargets</option> configuration scope (targets are specified by their "
+"name in the <literal>Created-By</literal> field). Additionally, targets can "
+"be enabled or disabled by using the <literal>Identifier</literal> field as "
+"an option with a boolean value instead of using this multivalue option."
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
"downloading the new indexes entirely. The value of this option is ignored if "
"the repository doesn't announce the availability of PDiffs. Defaults to the "
"value of the option with the same name for a specific index file defined in "
-"the <option>Acquire::IndexTargets</option> scope, which itself default to "
+"the <option>Acquire::IndexTargets</option> scope, which itself defaults to "
"the value of configuration option <option>Acquire::PDiffs</option> which "
"defaults to <literal>yes</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
#: sources.list.5.xml
msgid ""
-"<option>By-Hash</option> (<option>by-hash</option>) can have the value \"yes"
-"\", \"no\" or \"force\" and controls if APT should try to acquire indexes "
-"via an URI constructed from a hashsum of the expected file instead of using "
-"the well-known stable filename of the index. Using this can avoid hashsum "
-"mismatches, but requires a supporting mirror. The value \"yes\"/\"no\" "
+"<option>By-Hash</option> (<option>by-hash</option>) can have the value "
+"<literal>yes</literal>, <literal>no</literal> or <literal>force</literal> "
+"and controls if APT should try to acquire indexes via a URI constructed from "
+"a hashsum of the expected file instead of using the well-known stable "
+"filename of the index. Using this can avoid hashsum mismatches, but requires "
+"a supporting mirror. A <literal>yes</literal> or <literal>no</literal> value "
"activates/disables the use of this feature if this source indicates support "
-"for it, while \"force\" will enable the feature regardless of what the "
-"source indicates. Defaults to the value of the option of the same name for "
-"a specific index file defined in the <option>Acquire::IndexTargets</option> "
-"scope, which itself defaults to the value of configuration option "
+"for it, while <literal>force</literal> will enable the feature regardless of "
+"what the source indicates. Defaults to the value of the option of the same "
+"name for a specific index file defined in the <option>Acquire::IndexTargets</"
+"option> scope, which itself defaults to the value of configuration option "
"<option>Acquire::By-Hash</option> which defaults to <literal>yes</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
#: sources.list.5.xml
msgid ""
-"Further more, there are options which if set effect <emphasis>all</emphasis> "
+"Furthermore, there are options which if set affect <emphasis>all</emphasis> "
"sources with the same URI and Suite, so they have to be set on all such "
"entries and can not be varied between different components. APT will try to "
"detect and error out on such anomalies."
msgstr ""
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Allow-Insecure</option> (<option>allow-insecure</option>), "
+"<option>Allow-Weak</option> (<option>allow-weak</option>) and <option>Allow-"
+"Downgrade-To-Insecure</option> (<option>allow-downgrade-to-insecure</"
+"option>) are boolean values which all default to <literal>no</literal>. If "
+"set to <literal>yes</literal> they circumvent parts of &apt-secure; and "
+"should therefore not be used lightly!"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Trusted</option> (<option>trusted</option>) is a tri-state value "
+"which defaults to APT deciding if a source is considered trusted or if "
+"warnings should be raised before e.g. packages are installed from this "
+"source. This option can be used to override that decision. The value "
+"<literal>yes</literal> tells APT always to consider this source as trusted, "
+"even if it doesn't pass authentication checks. It disables parts of &apt-"
+"secure;, and should therefore only be used in a local and trusted context "
+"(if at all) as otherwise security is breached. The value <literal>no</"
+"literal> does the opposite, causing the source to be handled as untrusted "
+"even if the authentication checks passed successfully. The default value "
+"can't be set explicitly."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
#: sources.list.5.xml
msgid ""
"<option>Signed-By</option> (<option>signed-by</option>) is either an "
"absolute path to a keyring file (has to be accessible and readable for the "
"<literal>_apt</literal> user, so ensure everyone has read-permissions on the "
-"file) or a fingerprint of a key in either the <filename>trusted.gpg</"
-"filename> keyring or in one of the keyrings in the <filename>trusted.gpg.d/</"
+"file) or one or more fingerprints of keys either in the <filename>trusted."
+"gpg</filename> keyring or in the keyrings in the <filename>trusted.gpg.d/</"
"filename> directory (see <command>apt-key fingerprint</command>). If the "
-"option is set only the key(s) in this keyring or only the key with this "
-"fingerprint is used for the &apt-secure; verification of this repository. "
-"Otherwise all keys in the trusted keyrings are considered valid signers for "
-"this repository."
+"option is set, only the key(s) in this keyring or only the keys with these "
+"fingerprints are used for the &apt-secure; verification of this repository. "
+"Defaults to the value of the option with the same name if set in the "
+"previously acquired <filename>Release</filename> file. Otherwise all keys "
+"in the trusted keyrings are considered valid signers for this repository."
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
msgid ""
"<option>Check-Valid-Until</option> (<option>check-valid-until</option>) is "
"a yes/no value which controls if APT should try to detect replay attacks. A "
-"repository creator can declare until then the data provided in the "
-"repository should be considered valid and if this time is reached, but no "
-"new data is provided the data is considered expired and an error is raised. "
-"Beside increasing security as a malicious attacker can't sent old data "
-"forever denying a user to be able to upgrade to a new version, this also "
-"helps users identify mirrors which are no longer updated. Some repositories "
-"like historic archives aren't updated anymore by design through, so this "
-"check can be disabled by setting this option to <literal>no</literal>. "
-"Defaults to the value of configuration option <option>Acquire::Check-Valid-"
-"Until</option> which itself defaults to <literal>yes</literal>."
+"repository creator can declare a time until which the data provided in the "
+"repository should be considered valid, and if this time is reached, but no "
+"new data is provided, the data is considered expired and an error is "
+"raised. Besides increasing security, as a malicious attacker can't send old "
+"data forever to prevent a user from upgrading to a new version, this also "
+"helps users identify mirrors which are no longer updated. However, some "
+"repositories such as historic archives are not updated any more by design, "
+"so this check can be disabled by setting this option to <literal>no</"
+"literal>. Defaults to the value of configuration option <option>Acquire::"
+"Check-Valid-Until</option> which itself defaults to <literal>yes</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
#. type: Content of: <refentry><refsect1><title>
#: sources.list.5.xml
-msgid "URI specification"
+#, fuzzy
+#| msgid "URI specification"
+msgid "URI Specification"
msgstr "Especificación del URI"
#. type: Content of: <refentry><refsect1><para>
#. type: Content of: <refentry><refsect1><para>
#: sources.list.5.xml
-msgid "Source line for the above"
+#, fuzzy
+#| msgid "Source line for the above"
+msgid "Sources specification for the above."
msgstr "Línea para obtener el código fuente desde la ubicación anterior."
#. type: Content of: <refentry><refsect1><literallayout>
#: sources.list.5.xml
#, fuzzy, no-wrap
#| msgid ""
-#| "deb http://ftp.debian.org/debian &stable-codename; main\n"
-#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
+#| "deb http://ftp.debian.org/debian &debian-stable-codename; main\n"
+#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main"
msgid ""
-"deb http://httpredir.debian.org/debian &stable-codename; main\n"
-"deb [ arch=amd64,armel ] http://httpredir.debian.org/debian &stable-codename; main"
+"deb http://deb.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://deb.debian.org/debian &debian-stable-codename; main"
msgstr ""
-"deb http://ftp.debian.org/debian &stable-codename; main\n"
-"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
+"deb http://ftp.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main"
#. type: Content of: <refentry><refsect1><literallayout>
#: sources.list.5.xml
#, fuzzy, no-wrap
#| msgid ""
-#| "deb http://ftp.debian.org/debian &stable-codename; main\n"
-#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
+#| "deb http://ftp.debian.org/debian &debian-stable-codename; main\n"
+#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main"
msgid ""
"Types: deb\n"
-"URIs: http://httpredir.debian.org/debian\n"
-"Suites: &stable-codename;\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
"Components: main\n"
"\n"
"Types: deb\n"
-"URIs: http://httpredir.debian.org/debian\n"
-"Suites: &stable-codename;\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
"Components: main\n"
"Architectures: amd64 armel\n"
msgstr ""
-"deb http://ftp.debian.org/debian &stable-codename; main\n"
-"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
+"deb http://ftp.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main"
#. type: Content of: <refentry><refsect1><para>
#: sources.list.5.xml
#: sources.list.5.xml
msgid ""
"Uses FTP to access the archive at ftp.debian.org, under the debian "
-"directory, and uses only the &stable-codename;/contrib area."
+"directory, and uses only the &debian-stable-codename;/contrib area."
msgstr ""
"Utiliza FTP para acceder al archivo de Debian en «ftp.debian.org», debajo "
-"del directorio «debian», y usa sólo la sección «&stable-codename;/contrib»."
+"del directorio «debian», y usa sólo la sección «&debian-stable-codename;/"
+"contrib»."
#. type: Content of: <refentry><refsect1><literallayout>
#: sources.list.5.xml
#, no-wrap
-msgid "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
-msgstr "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
+msgid "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib"
+msgstr "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib"
#. type: Content of: <refentry><refsect1><literallayout>
#: sources.list.5.xml
#, fuzzy, no-wrap
-#| msgid "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
+#| msgid "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib"
msgid ""
"Types: deb\n"
"URIs: ftp://ftp.debian.org/debian\n"
-"Suites: &stable-codename;\n"
+"Suites: &debian-stable-codename;\n"
"Components: contrib"
-msgstr "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
+msgstr "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib"
#. type: Content of: <refentry><refsect1><para>
#: sources.list.5.xml
#: sources.list.5.xml
#, no-wrap
msgid ""
-"deb http://httpredir.debian.org/debian stable main contrib\n"
-"deb-src http://httpredir.debian.org/debian stable main contrib\n"
-"deb http://httpredir.debian.org/debian testing main contrib\n"
-"deb-src http://httpredir.debian.org/debian testing main contrib\n"
-"deb http://httpredir.debian.org/debian unstable main contrib\n"
-"deb-src http://httpredir.debian.org/debian unstable main contrib"
+"deb http://deb.debian.org/debian stable main contrib\n"
+"deb-src http://deb.debian.org/debian stable main contrib\n"
+"deb http://deb.debian.org/debian testing main contrib\n"
+"deb-src http://deb.debian.org/debian testing main contrib\n"
+"deb http://deb.debian.org/debian unstable main contrib\n"
+"deb-src http://deb.debian.org/debian unstable main contrib"
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
#, no-wrap
msgid ""
"Types: deb deb-src\n"
-"URIs: http://httpredir.debian.org/debian\n"
+"URIs: http://deb.debian.org/debian\n"
"Suites: stable testing unstable\n"
"Components: main contrib\n"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
#: sources.list.5.xml
#, fuzzy
-#| msgid "&apt-cache; &apt-conf;"
-msgid "&apt-get;, &apt-conf;"
-msgstr "&apt-cache; &apt-conf;"
+#| msgid "&apt-cache;, &apt-config;, &apt-preferences;."
+msgid "&apt-get;, &apt-conf;, &apt-acquire-additional-files;"
+msgstr "&apt-cache;, &apt-config;, &apt-preferences;."
#. type: Content of: <refentry><refmeta><manvolnum>
#: apt-extracttemplates.1.xml apt-sortpkgs.1.xml apt-ftparchive.1.xml
msgid ""
"The <literal>release</literal> command generates a Release file from a "
"directory tree. It recursively searches the given directory for uncompressed "
-"<filename>Packages</filename> and <filename>Sources</filename> files and "
-"ones compressed with <command>gzip</command>, <command>bzip2</command> or "
-"<command>lzma</command> as well as <filename>Release</filename> and "
-"<filename>md5sum.txt</filename> files by default (<literal>APT::FTPArchive::"
-"Release::Default-Patterns</literal>). Additional filename patterns can be "
-"added by listing them in <literal>APT::FTPArchive::Release::Patterns</"
-"literal>. It then writes to stdout a <filename>Release</filename> file "
-"containing (by default) an MD5, SHA1, SHA256 and SHA512 digest for each file."
+"and compressed <filename>Packages</filename>, <filename>Sources</filename>, "
+"<filename>Contents</filename>, <filename>Components</filename> and "
+"<filename>icons</filename> files as well as <filename>Release</filename>, "
+"<filename>Index</filename> and <filename>md5sum.txt</filename> files by "
+"default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). "
+"Additional filename patterns can be added by listing them in <literal>APT::"
+"FTPArchive::Release::Patterns</literal>. It then writes to stdout a "
+"<filename>Release</filename> file containing (by default) an MD5, SHA1, "
+"SHA256 and SHA512 digest for each file."
msgstr ""
"La orden <literal>release</literal> genera un fichero «Release» a partir de "
"un árbol de directorios. Analiza el directorio dado de forma recursiva en "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "Values for the additional metadata fields in the Release file are taken "
+#| "from the corresponding variables under <literal>APT::FTPArchive::Release</"
+#| "literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
+#| "supported fields are: <literal>Origin</literal>, <literal>Label</"
+#| "literal>, <literal>Suite</literal>, <literal>Version</literal>, "
+#| "<literal>Codename</literal>, <literal>Date</literal>, <literal>Valid-"
+#| "Until</literal>, <literal>Architectures</literal>, <literal>Components</"
+#| "literal>, <literal>Description</literal>."
msgid ""
"Values for the additional metadata fields in the Release file are taken from "
"the corresponding variables under <literal>APT::FTPArchive::Release</"
-"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
-"supported fields are: <literal>Origin</literal>, <literal>Label</literal>, "
+"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
+"supported fields are <literal>Origin</literal>, <literal>Label</literal>, "
"<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</"
"literal>, <literal>Date</literal>, <literal>Valid-Until</literal>, "
-"<literal>Architectures</literal>, <literal>Components</literal>, "
-"<literal>Description</literal>."
+"<literal>Signed-By</literal>, <literal>Architectures</literal>, "
+"<literal>Components</literal> and <literal>Description</literal>."
msgstr ""
"Los valores para los campos de metadatos adicionales en el fichero «Release» "
"se toman de las variables correspondientes en <literal>APT::FTPArchive::"
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
#: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "Sets the default compression schemes to use for the package index files. "
+#| "It is a string that contains a space separated list of at least one of: "
+#| "'.' (no compression), 'gzip' and 'bzip2'. The default for all compression "
+#| "schemes is '. gzip'."
msgid ""
"Sets the default compression schemes to use for the package index files. It "
-"is a string that contains a space separated list of at least one of: '.' (no "
-"compression), 'gzip' and 'bzip2'. The default for all compression schemes is "
-"'. gzip'."
+"is a string that contains a space separated list of at least one of the "
+"compressors configured via the <option>APT::Compressor</option> "
+"configuration scope. The default for all compression schemes is '. gzip'."
msgstr ""
"Define los esquemas de compresión predeterminados para usar en los ficheros "
"de índice de paquete. Es una cadena que contiene una lista separada por "
"The <literal>Tree</literal> section takes a scope tag which sets the "
"<literal>$(DIST)</literal> variable and defines the root of the tree (the "
"path is prefixed by <literal>ArchiveDir</literal>). Typically this is a "
-"setting such as <filename>dists/&stable-codename;</filename>."
+"setting such as <filename>dists/&debian-stable-codename;</filename>."
msgstr ""
"La sección <literal>Tree</literal> toma un ámbito de una etiqueta que define "
"la variable <literal>$(DIST)</literal> y la raíz del árbol (a la ruta se le "
"añade el prefijo <literal>ArchiveDir</literal>). Normalmente esto es un "
-"valor como <filename>dists/&stable-codename;</filename>."
+"valor como <filename>dists/&debian-stable-codename;</filename>."
#. type: Content of: <refentry><refsect1><refsect2><para>
#: apt-ftparchive.1.xml
msgid ""
"This is a space separated list of all the architectures that appear under "
"search section. The special architecture 'source' is used to indicate that "
-"this tree has a source archive."
+"this tree has a source archive. The architecture 'all' signals that "
+"architecture specific files like <filename>Packages</filename> should not "
+"include information about architecture <literal>all</literal> packages in "
+"all files as they will be available in a dedicated file."
msgstr ""
-"Es una lista de todas las arquitecturas separadas por espacios que aparecen "
-"bajo la sección de búsqueda. La arquitectura especial «source» se usa para "
-"indicar que este árbol tiene un fichero de fuentes."
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
#: apt-ftparchive.1.xml
msgid "Which will use the already fetched archives on the disc."
msgstr "Esto utiliza los archivos del disco previamente obtenidos."
+#~ msgid "dpkg trigger usage (and related options)"
+#~ msgstr "Uso del disparador de dpkg (y de las opciones relacionadas)"
+
+#~ msgid ""
+#~ "APT can call &dpkg; in such a way as to let it make aggressive use of "
+#~ "triggers over multiple calls of &dpkg;. Without further options &dpkg; "
+#~ "will use triggers once each time it runs. Activating these options can "
+#~ "therefore decrease the time needed to perform the install or upgrade. "
+#~ "Note that it is intended to activate these options per default in the "
+#~ "future, but as it drastically changes the way APT calls &dpkg; it needs a "
+#~ "lot more testing. <emphasis>These options are therefore currently "
+#~ "experimental and should not be used in production environments.</"
+#~ "emphasis> It also breaks progress reporting such that all front-ends will "
+#~ "currently stay around half (or more) of the time in the 100% state while "
+#~ "it actually configures all packages."
+#~ msgstr ""
+#~ "APT puede invocar &dpkg; de forma que pueda hacer un uso agresivo de los "
+#~ "disparadores («triggers») mediante varias invocaciones a &dpkg;. Sin no "
+#~ "se definen más opciones, &dpkg; utilizará los disparadores una durante su "
+#~ "ejecución. Si se activan estas opciones, se puede reducir el tiempo "
+#~ "necesario para realizar la instalación o la actualización. Tenga en "
+#~ "cuenta que está diseñado para que estas opciones se activen de forma "
+#~ "predeterminada en un futuro, pero debido a los cambios drásticos en la "
+#~ "manera en que APT invoca a &dpkg;, necesita más pruebas. "
+#~ "<emphasis>Actualmente, estas opciones son experimentales, y no se "
+#~ "deberían usar en entornos de producción.</emphasis> También provoca un "
+#~ "fallo en el informe de progreso, con lo que todas las interfaces muestran "
+#~ "un progreso del 100% durante la mitad del tiempo (o más) durante la "
+#~ "configuración de todos los paquetes."
+
+#~ msgid ""
+#~ "DPkg::NoTriggers \"true\";\n"
+#~ "PackageManager::Configure \"smart\";\n"
+#~ "DPkg::ConfigurePending \"true\";\n"
+#~ "DPkg::TriggersPending \"true\";"
+#~ msgstr ""
+#~ "DPkg::NoTriggers \"true\";\n"
+#~ "PackageManager::Configure \"smart\";\n"
+#~ "DPkg::ConfigurePending \"true\";\n"
+#~ "DPkg::TriggersPending \"true\";"
+
+#~ msgid ""
+#~ "Note that it is not guaranteed that APT will support these options or "
+#~ "that these options will not cause (big) trouble in the future. If you "
+#~ "have understand the current risks and problems with these options, but "
+#~ "are brave enough to help testing them, create a new configuration file "
+#~ "and test a combination of options. Please report any bugs, problems and "
+#~ "improvements you encounter and make sure to note which options you have "
+#~ "used in your reports. Asking &dpkg; for help could also be useful for "
+#~ "debugging proposes, see e.g. <command>dpkg --audit</command>. A defensive "
+#~ "option combination would be <placeholder type=\"literallayout\" id=\"0\"/>"
+#~ msgstr ""
+#~ "Tenga en cuenta que no se garantiza que APT permitirá usar estas opciones "
+#~ "o que estas opciones no causen un (gran) problema en el futuro. Si ha "
+#~ "entendido los riesgos y los problemas actuales con estas opciones pero es "
+#~ "lo suficientemente valiente para ayudar a probarlas, cree un nuevo "
+#~ "fichero de configuración y pruebe una combinación de las opciones. Por "
+#~ "favor, informe de cualquier error, problema o mejora que encuentre y "
+#~ "asegúrese de apuntar en sus informes qué opciones ha usado. Pedir ayuda a "
+#~ "&dpkg; también puede ser útil por motivos de depuración, véase por "
+#~ "ejemplo: <command>dpkg --audit</command>. Una combinación de opciones "
+#~ "defensivas sería <placeholder type=\"literallayout\" id=\"0\"/>"
+
+#~ msgid ""
+#~ "Add the no triggers flag to all &dpkg; calls (except the ConfigurePending "
+#~ "call). See &dpkg; if you are interested in what this actually means. In "
+#~ "short: &dpkg; will not run the triggers when this flag is present unless "
+#~ "it is explicitly called to do so in an extra call. Note that this option "
+#~ "exists (undocumented) also in older APT versions with a slightly "
+#~ "different meaning: Previously these option only append --no-triggers to "
+#~ "the configure calls to &dpkg; - now APT will also add this flag to the "
+#~ "unpack and remove calls."
+#~ msgstr ""
+#~ "Añade a todas las invocaciones a &dpkg; la opción sin disparadores («no "
+#~ "triggers»), excepto a la invocación a «ConfigurePending». Consulte &dpkg; "
+#~ "si está interesado en saber qué significa esto. De forma breve: &dpkg; no "
+#~ "ejecuta los disparadores cuando está opción está presente a menos que se "
+#~ "ejecute explícitamente con una invocación adicional. Tenga en cuenta que "
+#~ "esta opción también existe en versiones antiguas de APT (aunque sin "
+#~ "documentar) con un significado diferente. Anteriormente sólo se añadía la "
+#~ "opción «--no-triggers» a las invocaciones de la configuración para "
+#~ "&dpkg;, ahora APT también añade esta opción a las invocaciones de "
+#~ "desempaquetado y eliminación."
+
+#~ msgid ""
+#~ "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
+#~ "and \"<literal>no</literal>\". The default value is \"<literal>all</"
+#~ "literal>\", which causes APT to configure all packages. The "
+#~ "\"<literal>smart</literal>\" way is to configure only packages which need "
+#~ "to be configured before another package can be unpacked (Pre-Depends), "
+#~ "and let the rest be configured by &dpkg; with a call generated by the "
+#~ "ConfigurePending option (see below). On the other hand, \"<literal>no</"
+#~ "literal>\" will not configure anything, and totally relies on &dpkg; for "
+#~ "configuration (which at the moment will fail if a Pre-Depends is "
+#~ "encountered). Setting this option to any value other than <literal>all</"
+#~ "literal> will implicitly also activate the next option by default, as "
+#~ "otherwise the system could end in an unconfigured and potentially "
+#~ "unbootable state."
+#~ msgstr ""
+#~ "Los valores válidos son «<literal>all</literal>», «<literal>smart</"
+#~ "literal>» y «<literal>no</literal>». El valor predeterminado es "
+#~ "«<literal>all</literal>», que hace que APT configure todos los paquetes. "
+#~ "El valor «<literal>smart</literal>» sólo configura los paquetes que "
+#~ "requieren ser configurados antes de que se desempaquete otro paquete "
+#~ "(predependencia) y permite que &dpkg; configure los restantes con una "
+#~ "invocación generada por la opción «ConfigurePending» (más abajo). El "
+#~ "valor «<literal>no</literal>» no configura nada y depende por completo de "
+#~ "&dpkg; para la configuración (que fallará si se encuentra una pre-"
+#~ "dependencia). Si se define esta opción con un valor distinto a "
+#~ "«<literal>all</literal>» activa implícitamente la siguiente opción de "
+#~ "forma predeterminada, ya que de otro modo el sistema podría terminar en "
+#~ "un estado mal configurado qué podría derivar en la imposibilidad de "
+#~ "arrancar el sistema. "
+
+#~ msgid ""
+#~ "Useful for the <literal>smart</literal> configuration as a package which "
+#~ "has pending triggers is not considered as <literal>installed</literal>, "
+#~ "and &dpkg; treats them as <literal>unpacked</literal> currently which is "
+#~ "a showstopper for Pre-Dependencies (see debbugs #526774). Note that this "
+#~ "will process all triggers, not only the triggers needed to configure this "
+#~ "package."
+#~ msgstr ""
+#~ "Útil para una configuración <literal>smart</literal> en la que un paquete "
+#~ "que tiene disparadores pendientes no se considera como "
+#~ "<literal>instalado</literal> y que dpkg lo trata como "
+#~ "<literal>desempaquetado</literal>, lo cual entra en conflicto con el "
+#~ "sistema de pre-dependencias (véase debbugs #526774). Tenga en cuenta que "
+#~ "esto procesará todos los disparadores, no sólo los disparadores "
+#~ "necesarios para configurar este paquete."
+
+#~ msgid ""
+#~ "OrderList::Score {\n"
+#~ "\tDelete 500;\n"
+#~ "\tEssential 200;\n"
+#~ "\tImmediate 10;\n"
+#~ "\tPreDepends 50;\n"
+#~ "};"
+#~ msgstr ""
+#~ "OrderList::Score {\n"
+#~ "\tDelete 500;\n"
+#~ "\tEssential 200;\n"
+#~ "\tImmediate 10;\n"
+#~ "\tPreDepends 50;\n"
+#~ "};"
+
+#~ msgid ""
+#~ "Essential packages (and their dependencies) should be configured "
+#~ "immediately after unpacking. It is a good idea to do this quite early in "
+#~ "the upgrade process as these configure calls also currently require "
+#~ "<literal>DPkg::TriggersPending</literal> which will run quite a few "
+#~ "triggers (which may not be needed). Essentials get per default a high "
+#~ "score but the immediate flag is relatively low (a package which has a Pre-"
+#~ "Depends is rated higher). These option and the others in the same group "
+#~ "can be used to change the scoring. The following example shows the "
+#~ "settings with their default values. <placeholder type=\"literallayout\" "
+#~ "id=\"0\"/>"
+#~ msgstr ""
+#~ "Los paquetes esenciales (y sus dependencias) se deberían configurar "
+#~ "inmediatamente después de desempaquetarlos. Se recomienda realizarlo lo "
+#~ "más pronto posible en el proceso de actualización ya que actualmente "
+#~ "estas invocaciones de configuración también necesitan <literal>DPkg::"
+#~ "TriggersPending</literal>, que ejecuta varios disparadores (que puede que "
+#~ "no sean necesarios). Los esenciales tienen, de forma predeterminada, una "
+#~ "puntuación alta pero la opción inmediata es relativamente baja (un "
+#~ "paquete que tenga pre-dependencias tiene una puntuación más alta). Puede "
+#~ "cambiar la puntuación mediante esta opción y las otras del mismo grupo. "
+#~ "El siguiente ejemplo muestra la configuración con los valores "
+#~ "predeterminados. <placeholder type=\"literallayout\" id=\"0\"/>"
+
+#~ msgid "List fingerprints of trusted keys."
+#~ msgstr "Lista las huellas digitales de las claves de confianza."
+
+#~ msgid "<filename>/etc/apt/trustdb.gpg</filename>"
+#~ msgstr "<filename>/etc/apt/trustdb.gpg</filename>"
+
+#~ msgid "Local trust database of archive keys."
+#~ msgstr "Base de datos local de las claves de confianza de archivos Debian"
+
+#~ msgid "&keyring-filename;"
+#~ msgstr "&keyring-filename;"
+
+#~ msgid "Keyring of &keyring-distro; archive trusted keys."
+#~ msgstr ""
+#~ "Registro de las claves de confianza del archivo de &keyring-distro;."
+
+#~ msgid "&keyring-removed-filename;"
+#~ msgstr "&keyring-removed-filename;"
+
+#~ msgid "Keyring of &keyring-distro; archive removed trusted keys."
+#~ msgstr ""
+#~ "Registro de las claves de confianza eliminadas del archivo de &keyring-"
+#~ "distro;."
+
+#, fuzzy
+#~| msgid "&apt-cache; &apt-conf;"
+#~ msgid "&apt-get;, &apt-conf;"
+#~ msgstr "&apt-cache; &apt-conf;"
+
+#~ msgid ""
+#~ "This is a space separated list of all the architectures that appear under "
+#~ "search section. The special architecture 'source' is used to indicate "
+#~ "that this tree has a source archive."
+#~ msgstr ""
+#~ "Es una lista de todas las arquitecturas separadas por espacios que "
+#~ "aparecen bajo la sección de búsqueda. La arquitectura especial «source» "
+#~ "se usa para indicar que este árbol tiene un fichero de fuentes."
+
+#, fuzzy
+#~| msgid ""
+#~| "<literal>rdepends</literal> shows a listing of each reverse dependency a "
+#~| "package has."
+#~ msgid ""
+#~ "<literal>show</literal> shows the package information for the given "
+#~ "package(s)."
+#~ msgstr ""
+#~ "<literal>rdepends</literal> muestra las dependencias inversas de un "
+#~ "paquete."
+
+#, fuzzy
+#~| msgid ""
+#~| "<literal>showhold</literal> is used to print a list of packages on hold "
+#~| "in the same way as for the other show commands."
+#~ msgid ""
+#~ "<literal>update</literal> is used to resynchronize the package index "
+#~ "files from their sources."
+#~ msgstr ""
+#~ "<literal>showhold</literal> muestra una lista de paquetes retenidos "
+#~ "(«hold») de la misma forma que las otras órdenes «show»."
+
+#, fuzzy
+#~| msgid "the <literal>Package:</literal> line"
+#~ msgid "The option <literal>DPkg::Progress-Fancy</literal> is enabled."
+#~ msgstr "La línea <literal>Package:</literal>"
+
+#, fuzzy
+#~| msgid "the <literal>Component:</literal> line"
+#~ msgid "The option <literal>APT::Color</literal> is enabled."
+#~ msgstr "La línea <literal>Component:</literal>"
+
+#, fuzzy
+#~| msgid "the <literal>Archive:</literal> or <literal>Suite:</literal> line"
+#~ msgid ""
+#~ "The option <literal>upgrade</literal> has <literal>--with-new-pkgs</"
+#~ "literal> enabled by default."
+#~ msgstr "Las líneas <literal>Archive:</literal> o <literal>Suite:</literal>"
+
+#~ msgid ""
+#~ "Pass advanced options to gpg. With adv --recv-key you can download the "
+#~ "public key."
+#~ msgstr ""
+#~ "Proporciona opciones avanzadas a gpg. Puede descargar la clave pública "
+#~ "con «adv --recv-key»."
+
+#~ msgid "mark/unmark a package as being automatically-installed"
+#~ msgstr "Marca o desmarca un paquete como instalado automáticamente"
+
+#~ msgid ""
+#~ "<command>apt-mark</command> will change whether a package has been marked "
+#~ "as being automatically installed."
+#~ msgstr ""
+#~ "<command>apt-mark</command> conmuta si un paquete se instaló "
+#~ "automáticamente o no."
+
+#~ msgid ""
+#~ "<literal>hold</literal> is used to mark a package as held back, which "
+#~ "will prevent the package from being automatically installed, upgraded or "
+#~ "removed. The command is only a wrapper around <command>dpkg --set-"
+#~ "selections</command> and the state is therefore maintained by &dpkg; and "
+#~ "not affected by the <option>--file</option> option."
+#~ msgstr ""
+#~ "<literal>hold</literal> sirve para marcar un paquete para su retención, "
+#~ "impidiendo que el paquete se instale, actualice o elimine de forma "
+#~ "automática. La orden es una interfaz para <command>dpkg --set-selections</"
+#~ "command>, por lo que &dpkg; preserva el estado sin que la opción "
+#~ "<option>--file</option> tenga efecto sobre él."
+
+#~ msgid ""
+#~ "If a package comes from a archive without a signature, or with a "
+#~ "signature that apt does not have a key for, that package is considered "
+#~ "untrusted, and installing it will result in a big warning. <command>apt-"
+#~ "get</command> will currently only warn for unsigned archives; future "
+#~ "releases might force all sources to be verified before downloading "
+#~ "packages from them."
+#~ msgstr ""
+#~ "Si el paquete viene de un archivo sin una firma o con una firma de la que "
+#~ "apt no tiene su clave, el paquete se considerará no fiable y su "
+#~ "instalación provocará un aviso importante. <command>apt-get</command> "
+#~ "actualmente sólo avisa de los archivos sin firmar, puede que las próximas "
+#~ "versiones fuercen una comprobación de todas las fuentes antes de "
+#~ "descargar paquetes desde ellas."
+
#~ msgid ""
#~ "No action; perform a simulation of events that would occur but do not "
#~ "actually change the system. Configuration Item: <literal>APT::Get::"
#~ msgstr "Algunos ejemplos:"
#~ msgid ""
-#~ "deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n"
-#~ "deb http://security.debian.org/ &stable-codename;/updates main contrib "
+#~ "deb http://ftp.debian.org/debian &debian-stable-codename; main contrib "
#~ "non-free\n"
+#~ "deb http://security.debian.org/ &debian-stable-codename;/updates main "
+#~ "contrib non-free\n"
#~ " "
#~ msgstr ""
-#~ "deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n"
-#~ "deb http://security.debian.org/ &stable-codename;/updates main contrib "
+#~ "deb http://ftp.debian.org/debian &debian-stable-codename; main contrib "
#~ "non-free\n"
+#~ "deb http://security.debian.org/ &debian-stable-codename;/updates main "
+#~ "contrib non-free\n"
#~ " "
#~ msgid "apt"
#, fuzzy
#~| msgid ""
#~| "APT is a management system for software packages. For normal day to day "
-#~| "package management there are several frontends available, such as "
+#~| "package management there are several front-ends available, such as "
#~| "B<aptitude>(8) for the command line or B<synaptic>(8) for the X Window "
#~| "System. Some options are only implemented in B<apt-get>(8) though."
#~ msgid ""
-#~ "For normal day to day package management there are several frontends "
+#~ "For normal day to day package management there are several front-ends "
#~ "available, such as B<aptitude>(8) for the command line or "
#~ "B<synaptic>(8) for the X Window System. Some options are only "
#~ "implemented in B<apt-get>(8) though."
projects / apt.git / blobdiff