+"Explicação: Desinstala ou não instala nenhumas versões de pacotes originais Debian\n"
+"Explicação: para além daquelas da distribuição com nome de código &debian-testing-codename; ou sid\n"
+"Package: *\n"
+"Pin: release n=&debian-testing-codename;\n"
+"Pin-Priority: 900\n"
+"\n"
+"Explicação: Debian unstable tem sempre o nome de código sid\n"
+"Package: *\n"
+"Pin: release a=sid\n"
+"Pin-Priority: 800\n"
+"\n"
+"Package: *\n"
+"Pin: release o=Debian\n"
+"Pin-Priority: -10\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"The following APT preferences file will cause APT to assign a priority "
+"higher than the default (500) to all package versions belonging to a "
+"specified codename of a distribution and a prohibitively low priority to "
+"package versions belonging to other <literal>Debian</literal> distributions, "
+"codenames and archives. Note that with this APT preference APT will follow "
+"the migration of a release from the archive <literal>testing</literal> to "
+"<literal>stable</literal> and later <literal>oldstable</literal>. If you "
+"want to follow for example the progress in <literal>testing</literal> "
+"notwithstanding the codename changes you should use the example "
+"configurations above. <placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"O seguinte ficheiro de preferências do APT irá fazer com que o APT atribua "
+"uma prioridade mais alta que a predefinida (500) a todas as versões de "
+"pacotes pertencentes a um nome de código especificado de uma distribuição "
+"com uma prioridade proibitivamente baixa a versões de pacotes pertencentes a "
+"outras distribuições, nomes de código ou arquivos <literal>Debian</literal>. "
+"Note que com estas preferências o APT irá seguir a migração de um lançamento "
+"a partir do arquivo <literal>testing</literal> para <literal>stable</"
+"literal> e mais tarde <literal>oldstable</literal>. Se você que seguir por "
+"exemplo o progresso em <literal>testing</literal> não obstante as alterações "
+"do nome de código, você deve usar as configurações exemplo acima. "
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"With a suitable &sources-list; file and the above preferences file, any of "
+"the following commands will cause APT to upgrade to the latest version(s) in "
+"the release codenamed with <literal>&debian-testing-codename;</literal>. "
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"Com um ficheiro &sources-list; apropriado e o ficheiro de preferências "
+"acima, qualquer dos seguintes comandos fará com que o APT actualize para a "
+"versão mais recente no lançamento com nome de código <literal>&debian-"
+"testing-codename;</literal>. <placeholder type=\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid "apt-get install <replaceable>package</replaceable>/sid\n"
+msgstr "apt-get install <replaceable>pacote</replaceable>/sid\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"The following command will cause APT to upgrade the specified package to the "
+"latest version from the <literal>sid</literal> distribution. Thereafter, "
+"<command>apt-get upgrade</command> will upgrade the package to the most "
+"recent <literal>&debian-testing-codename;</literal> version if that is more "
+"recent than the installed version, otherwise, to the most recent "
+"<literal>sid</literal> version if that is more recent than the installed "
+"version. <placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"O seguinte comando irá fazer com que o APT actualize o pacote especificado "
+"para a versão mais recente da distribuição <literal>sid</literal>. "
+"Posteriormente, <command>apt-get upgrade</command> irá actualizar o pacote "
+"para a versão <literal>&debian-testing-codename;</literal> mais recente se "
+"essa for mais recente que a versão instalada, caso contrário, para a versão "
+"<literal>sid</literal> mais recente se essa for mais recente que a versão "
+"instalada. <placeholder type=\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt_preferences.5.xml
+msgid "&apt-get; &apt-cache; &apt-conf; &sources-list;"
+msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;"
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: sources.list.5.xml
+msgid "List of configured APT data sources"
+msgstr "Lista das fontes de dados APT configuradas"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The source list <filename>/etc/apt/sources.list</filename> is designed to "
+#| "support any number of active sources and a variety of source media. The "
+#| "file lists one source per line, with the most preferred source listed "
+#| "first. The information available from the configured sources is acquired "
+#| "by <command>apt-get update</command> (or by an equivalent command from "
+#| "another APT front-end)."
+msgid ""
+"The source list <filename>/etc/apt/sources.list</filename> and the files "
+"contained in <filename>/etc/apt/sources.list.d/</filename> are designed to "
+"support any number of active sources and a variety of source media. The "
+"files list one source per line (one-line style) or contain multiline stanzas "
+"defining one or more sources per stanza (deb822 style), with the most "
+"preferred source listed first (in case a single version is available from "
+"more than one source). The information available from the configured sources "
+"is acquired by <command>apt-get update</command> (or by an equivalent "
+"command from another APT front-end)."
+msgstr ""
+"A lista de fontes <filename>/etc/apt/sources.list</filename> está desenhada "
+"a suportar qualquer número de fontes activas e uma variedade de meios de "
+"fontes. O ficheiro lista uma fonte por cada linha, com as fontes mais "
+"preferidas listadas primeiro. A informação disponível a partir das fontes "
+"configuradas é obtida pelo <command>apt-get update</command> (ou por um "
+"comando equivalente de outra interface \"front-end\" do APT)."
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "sources.list.d"
+msgstr "sources.list.d"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The <filename>/etc/apt/sources.list.d</filename> directory provides a way "
+#| "to add sources.list entries in separate files. The format is the same as "
+#| "for the regular <filename>sources.list</filename> file. File names need "
+#| "to end with <filename>.list</filename> and may only contain letters (a-z "
+#| "and A-Z), digits (0-9), underscore (_), hyphen (-) and period (.) "
+#| "characters. Otherwise APT will print a notice that it has ignored a "
+#| "file, unless that file matches a pattern in the <literal>Dir::Ignore-"
+#| "Files-Silently</literal> configuration list - in which case it will be "
+#| "silently ignored."
+msgid ""
+"The <filename>/etc/apt/sources.list.d</filename> directory provides a way to "
+"add sources.list entries in separate files. Two different file formats are "
+"allowed as described in the next two sections. Filenames need to have "
+"either the extension <filename>.list</filename> or <filename>.sources</"
+"filename> depending on the contained format. The filenames may only contain "
+"letters (a-z and A-Z), digits (0-9), underscore (_), hyphen (-) and period "
+"(.) characters. Otherwise APT will print a notice that it has ignored a "
+"file, unless that file matches a pattern in the <literal>Dir::Ignore-Files-"
+"Silently</literal> configuration list - in which case it will be silently "
+"ignored."
+msgstr ""
+"O directório <filename>/etc/apt/sources.list.d</filename> disponibiliza um "
+"modo de adicionar entradas na sources.list em ficheiros separados. O formato "
+"é o mesmo que para o ficheiro <filename>sources.list</filename> regular. Os "
+"nomes de ficheiros precisam acabar com <filename>.list</filename> e apenas "
+"podem conter letras (a-z e A-Z), dígitos (0-9), e os caracteres underscore "
+"(_), menos (-) e ponto (.). De outro modo o APT irá escrever um aviso de que "
+"ignorou um ficheiro, a menos que esse ficheiro coincida com um padrão na "
+"lista de configuração <literal>Dir::Ignore-Files-Silently</literal> - que "
+"neste caso serão ignorados em silêncio."
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "One-Line-Style Format"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Files in this format have the extension <filename>.list</filename>. Each "
+"line specifying a source starts with a type (e.g. <literal>deb-src</"
+"literal>) followed by options and arguments for this type. Individual "
+"entries cannot be continued onto a following line. Empty lines are ignored, "
+"and a <literal>#</literal> character anywhere on a line marks the remainder "
+"of that line as a comment. Consequently an entry can be disabled by "
+"commenting out the entire line. If options should be provided they are "
+"separated by spaces and all of them together are enclosed by square brackets "
+"(<literal>[]</literal>) included in the line after the type separated from "
+"it with a space. If an option allows multiple values these are separated "
+"from each other with a comma (<literal>,</literal>). An option name is "
+"separated from its value(s) by an equals sign (<literal>=</literal>). "
+"Multivalue options also have <literal>-=</literal> and <literal>+=</literal> "
+"as separators, which instead of replacing the default with the given "
+"value(s) modify the default value(s) to remove or include the given values."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"This is the traditional format and supported by all apt versions. Note that "
+"not all options as described below are supported by all apt versions. Note "
+"also that some older applications parsing this format on their own might not "
+"expect to encounter options as they were uncommon before the introduction of "
+"multi-architecture support."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "deb822-Style Format"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Files in this format have the extension <filename>.sources</filename>. The "
+"format is similar in syntax to other files used by Debian and its "
+"derivatives, such as the metadata files that apt will download from the "
+"configured sources or the <filename>debian/control</filename> file in a "
+"Debian source package. Individual entries are separated by an empty line; "
+"additional empty lines are ignored, and a <literal>#</literal> character at "
+"the start of the line marks the entire line as a comment. An entry can hence "
+"be disabled by commenting out each line belonging to the stanza, but it is "
+"usually easier to add the field \"Enabled: no\" to the stanza to disable the "
+"entry. Removing the field or setting it to yes reenables it. Options have "
+"the same syntax as every other field: A fieldname separated by a colon "
+"(<literal>:</literal>) and optionally spaces from its value(s). Note "
+"especially that multiple values are separated by spaces, not by commas as in "
+"the one-line format. Multivalue fields like <literal>Architectures</literal> "
+"also have <literal>Architectures-Add</literal> and <literal>Architectures-"
+"Remove</literal> to modify the default value rather than replacing it."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"This is a new format supported by apt itself since version 1.1. Previous "
+"versions ignore such files with a notice message as described earlier. It "
+"is intended to make this format gradually the default format, deprecating "
+"the previously described one-line-style format, as it is easier to create, "
+"extend and modify for humans and machines alike especially if a lot of "
+"sources and/or options are involved. Developers who are working with and/or "
+"parsing apt sources are highly encouraged to add support for this format and "
+"to contact the APT team to coordinate and share this work. Users can freely "
+"adopt this format already, but may encounter problems with software not "
+"supporting the format yet."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "The deb and deb-src types"
+msgid "The deb and deb-src Types: General Format"
+msgstr "Os tipos deb e deb-src"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The <literal>deb</literal> type references a typical two-level Debian "
+#| "archive, <filename>distribution/component</filename>. The "
+#| "<literal>distribution</literal> is generally an archive name like "
+#| "<literal>stable</literal> or <literal>testing</literal> or a codename "
+#| "like <literal>&debian-stable-codename;</literal> or <literal>&debian-"
+#| "testing-codename;</literal> while component is one of <literal>main</"
+#| "literal>, <literal>contrib</literal> or <literal>non-free</literal>. The "
+#| "<literal>deb-src</literal> type references a Debian distribution's source "
+#| "code in the same form as the <literal>deb</literal> type. A <literal>deb-"
+#| "src</literal> line is required to fetch source indexes."
+msgid ""
+"The <literal>deb</literal> type references a typical two-level Debian "
+"archive, <filename>distribution/component</filename>. The "
+"<literal>distribution</literal> is generally a suite name like "
+"<literal>stable</literal> or <literal>testing</literal> or a codename like "
+"<literal>&debian-stable-codename;</literal> or <literal>&debian-testing-"
+"codename;</literal> while component is one of <literal>main</literal>, "
+"<literal>contrib</literal> or <literal>non-free</literal>. The <literal>deb-"
+"src</literal> type references a Debian distribution's source code in the "
+"same form as the <literal>deb</literal> type. A <literal>deb-src</literal> "
+"line is required to fetch source indexes."
+msgstr ""
+"O tipo <literal>deb</literal> descreve um arquivo Debian típico de dois "
+"níveis, <filename>distribution/component</filename>. A "
+"<literal>distribution</literal> é geralmente um nome de arquivo como "
+"<literal>stable</literal> ou <literal>testing</literal> ou um nome de código "
+"como <literal>&debian-stable-codename;</literal> ou <literal>&debian-testing-"
+"codename;</literal> enquanto que componente é um de <literal>main</literal>, "
+"<literal>contrib</literal> ou <literal>non-free</literal>. O tipo "
+"<literal>deb-src</literal> faz referência a um código fonte de distribuição "
+"Debian no mesmo formato que o tipo <literal>deb</literal>. É necessária uma "
+"linha <literal>deb-src</literal> para obter índices das fontes."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The format for a <filename>sources.list</filename> entry using the "
+#| "<literal>deb</literal> and <literal>deb-src</literal> types is:"
+msgid ""
+"The format for two one-line-style entries using the <literal>deb</literal> "
+"and <literal>deb-src</literal> types is:"
+msgstr ""
+"O formato para uma entrada na <filename>sources.list</filename> usando os "
+"tipos <literal>deb</literal> e <literal>deb-src</literal> é:"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"deb [ option1=value1 option2=value2 ] uri suite [component1] [component2] [...]\n"
+"deb-src [ option1=value1 option2=value2 ] uri suite [component1] [component2] [...]"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+" Types: deb deb-src\n"
+" URIs: uri\n"
+" Suites: suite\n"
+" Components: [component1] [component2] [...]\n"
+" option1: value1\n"
+" option2: value2\n"
+" "
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "Alternatively a rfc822 style format is also supported: <placeholder type="
+#| "\"literallayout\" id=\"0\"/>"
+msgid ""
+"Alternatively the equivalent entry in deb822 style looks like this: "
+"<placeholder type=\"literallayout\" id=\"0\"/>"
+msgstr ""
+"Em alternativa, é também suportado um formato estilo rfc822: <placeholder "
+"type=\"literallayout\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The URI for the <literal>deb</literal> type must specify the base of the "
+#| "Debian distribution, from which APT will find the information it needs. "
+#| "<literal>suite</literal> can specify an exact path, in which case the "
+#| "components must be omitted and <literal>suite</literal> must end with a "
+#| "slash (<literal>/</literal>). This is useful for the case when only a "
+#| "particular sub-section of the archive denoted by the URI is of interest. "
+#| "If <literal>suite</literal> does not specify an exact path, at least one "
+#| "<literal>component</literal> must be present."
+msgid ""
+"The URI for the <literal>deb</literal> type must specify the base of the "
+"Debian distribution, from which APT will find the information it needs. "
+"<literal>suite</literal> can specify an exact path, in which case the "
+"components must be omitted and <literal>suite</literal> must end with a "
+"slash (<literal>/</literal>). This is useful for the case when only a "
+"particular sub-directory of the archive denoted by the URI is of interest. "
+"If <literal>suite</literal> does not specify an exact path, at least one "
+"<literal>component</literal> must be present."
+msgstr ""
+"O URI para o tipo <literal>deb</literal> tem de especificar a base da "
+"distribuição Debian, a partir do qual o APT irá encontrar a informação que "
+"precisa. <literal>suite</literal> pode especificar um caminho exacto, que no "
+"caso os componente têm de ser omitidos e <literal>suite</literal> deve "
+"terminar com uma barra (<literal>/</literal>). Isto é útil para o caso de "
+"apenas ser de interesse uma sub-secção particular do arquivo denotado pelo "
+"URI. Se <literal>suite</literal> não especificar um caminho exacto, pelo "
+"menos um <literal>component</literal> tem de estar presente."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>suite</literal> may also contain a variable, <literal>$(ARCH)</"
+#| "literal> which expands to the Debian architecture (such as "
+#| "<literal>amd64</literal> or <literal>armel</literal>) used on the system. "
+#| "This permits architecture-independent <filename>sources.list</filename> "
+#| "files to be used. In general this is only of interest when specifying an "
+#| "exact path, <literal>APT</literal> will automatically generate a URI with "
+#| "the current architecture otherwise."
+msgid ""
+"<literal>suite</literal> may also contain a variable, <literal>$(ARCH)</"
+"literal> which expands to the Debian architecture (such as <literal>amd64</"
+"literal> or <literal>armel</literal>) used on the system. This permits "
+"architecture-independent <filename>sources.list</filename> files to be used. "
+"In general this is only of interest when specifying an exact path; "
+"<literal>APT</literal> will automatically generate a URI with the current "
+"architecture otherwise."
+msgstr ""
+"<literal>suite</literal> também pode conter uma variável. <literal>$(ARCH)</"
+"literal> a qual se expande à arquitectura Debian (tal como <literal>amd64</"
+"literal> ou <literal>armel</literal>) usada no sistema. Isto permite que "
+"seja usados ficheiros <filename>sources.list</filename> independentes da "
+"arquitectura. Em geral, isto é apenas de interesse quando se especifica um "
+"caminho exacto. De outro modo o <literal>APT</literal> irá gerar "
+"automaticamente um URI com a arquitectura actual."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "In the traditional style sources.list format since only one distribution "
+#| "can be specified per line it may be necessary to have multiple lines for "
+#| "the same URI, if a subset of all available distributions or components at "
+#| "that location is desired. APT will sort the URI list after it has "
+#| "generated a complete set internally, and will collapse multiple "
+#| "references to the same Internet host, for instance, into a single "
+#| "connection, so that it does not inefficiently establish an FTP "
+#| "connection, close it, do something else, and then re-establish a "
+#| "connection to that same host. This feature is useful for accessing busy "
+#| "FTP sites with limits on the number of simultaneous anonymous users. APT "
+#| "also parallelizes connections to different hosts to more effectively deal "
+#| "with sites with low bandwidth."
+msgid ""
+"Especially in the one-line-style format since only one distribution can be "
+"specified per line it may be necessary to have multiple lines for the same "
+"URI, if a subset of all available distributions or components at that "
+"location is desired. APT will sort the URI list after it has generated a "
+"complete set internally, and will collapse multiple references to the same "
+"Internet host, for instance, into a single connection, so that it does not "
+"inefficiently establish a connection, close it, do something else, and then "
+"re-establish a connection to that same host. APT also parallelizes "
+"connections to different hosts to more effectively deal with sites with low "
+"bandwidth."
+msgstr ""
+"No estilo tradicional, o formato do sources.list, como apenas pode ser "
+"especificada por linha uma distribuição, pode ser necessário ter várias "
+"linhas para o mesmo URI, se só for desejado um sub-conjunto de todas as "
+"distribuições e componentes dessa localização. O APT irá ordenar a lista de "
+"URI após ter gerado internamente um conjunto completo, e irá desabar as "
+"várias referências à mesma máquina na Internet, por exemplo, numa única "
+"ligação, para que não estabeleça uma ligação FTP ineficiente, a feche, faça "
+"outra coisa, e depois volte a estabelecer ligação à mesma máquina. Esta "
+"funcionalidade é útil para aceder a sites FTP ocupados que limitam o número "
+"de utilizadores anónimos em simultâneo. O APT também paraleliza ligações a "
+"máquinas diferentes para lidar mais eficientemente com sites com largura de "
+"banda baixa."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"It is important to list sources in order of preference, with the most "
+"preferred source listed first. Typically this will result in sorting by "
+"speed from fastest to slowest (CD-ROM followed by hosts on a local network, "
+"followed by distant Internet hosts, for example)."
+msgstr ""
+"É importante listar as fontes por ordem de preferência, com a fonte mais "
+"preferida listada em primeiro lugar. Tipicamente isto irá resultar numa "
+"ordenação por velocidades desde o mais rápido até ao mais lento (CD-ROM "
+"seguido por máquinas numa rede local, seguido por máquinas distantes na "
+"Internet, por exemplo)."
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "&sourceslist-list-format;"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "&sourceslist-sources-format;"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"As an example, the sources for your distribution could look like this in one-"
+"line-style format: <placeholder type=\"literallayout\" id=\"0\"/> or like "
+"this in deb822 style format: <placeholder type=\"literallayout\" id=\"1\"/>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "The deb and deb-src types"
+msgid "The deb and deb-src types: Options"
+msgstr "Os tipos deb e deb-src"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Each source entry can have options specified to modify which source is "
+"accessed and how data is acquired from it. Format, syntax and names of the "
+"options vary between the one-line-style and deb822-style formats as "
+"described, but they both have the same options available. For simplicity we "
+"list the deb822 fieldname and provide the one-line name in brackets. "
+"Remember that besides setting multivalue options explicitly, there is also "
+"the option to modify them based on the default, but we aren't listing those "
+"names explicitly here. Unsupported options are silently ignored by all APT "
+"versions."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+#| "replaceable>,…</literal> can be used to specify for which architectures "
+#| "information should be downloaded. If this option is not set all "
+#| "architectures defined by the <literal>APT::Architectures</literal> option "
+#| "will be downloaded."
+msgid ""
+"<option>Architectures</option> (<option>arch</option>) is a multivalue "
+"option defining for which architectures information should be downloaded. If "
+"this option isn't set the default is all architectures as defined by the "
+"<option>APT::Architectures</option> config option."
+msgstr ""
+"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+"replaceable>,…</literal> pode ser usado para especificar para quais "
+"arquitecturas deve ser descarregada a informação. Se esta opção não estiver "
+"definida, serão descarregadas todas as arquitecturas definidas pela opção "
+"<literal>APT::Architectures</literal>."
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+#| "replaceable>,…</literal> can be used to specify for which architectures "
+#| "information should be downloaded. If this option is not set all "
+#| "architectures defined by the <literal>APT::Architectures</literal> option "
+#| "will be downloaded."
+msgid ""
+"<option>Languages</option> (<option>lang</option>) is a multivalue option "
+"defining for which languages information such as translated package "
+"descriptions should be downloaded. If this option isn't set the default is "
+"all languages as defined by the <option>Acquire::Languages</option> config "
+"option."
+msgstr ""
+"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+"replaceable>,…</literal> pode ser usado para especificar para quais "
+"arquitecturas deve ser descarregada a informação. Se esta opção não estiver "
+"definida, serão descarregadas todas as arquitecturas definidas pela opção "
+"<literal>APT::Architectures</literal>."
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Targets</option> (<option>target</option>) is a multivalue option "
+"defining which download targets apt will try to acquire from this source. If "
+"not specified, the default set is defined by the <option>Acquire::"
+"IndexTargets</option> configuration scope (targets are specified by their "
+"name in the <literal>Created-By</literal> field). Additionally, targets can "
+"be enabled or disabled by using the <literal>Identifier</literal> field as "
+"an option with a boolean value instead of using this multivalue option."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>PDiffs</option> (<option>pdiffs</option>) is a yes/no value which "
+"controls if APT should try to use PDiffs to update old indexes instead of "
+"downloading the new indexes entirely. The value of this option is ignored if "
+"the repository doesn't announce the availability of PDiffs. Defaults to the "
+"value of the option with the same name for a specific index file defined in "
+"the <option>Acquire::IndexTargets</option> scope, which itself defaults to "
+"the value of configuration option <option>Acquire::PDiffs</option> which "
+"defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>By-Hash</option> (<option>by-hash</option>) can have the value "
+"<literal>yes</literal>, <literal>no</literal> or <literal>force</literal> "
+"and controls if APT should try to acquire indexes via a URI constructed from "
+"a hashsum of the expected file instead of using the well-known stable "
+"filename of the index. Using this can avoid hashsum mismatches, but requires "
+"a supporting mirror. A <literal>yes</literal> or <literal>no</literal> value "
+"activates/disables the use of this feature if this source indicates support "
+"for it, while <literal>force</literal> will enable the feature regardless of "
+"what the source indicates. Defaults to the value of the option of the same "
+"name for a specific index file defined in the <option>Acquire::IndexTargets</"
+"option> scope, which itself defaults to the value of configuration option "
+"<option>Acquire::By-Hash</option> which defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Furthermore, there are options which if set affect <emphasis>all</emphasis> "
+"sources with the same URI and Suite, so they have to be set on all such "
+"entries and can not be varied between different components. APT will try to "
+"detect and error out on such anomalies."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Allow-Insecure</option> (<option>allow-insecure</option>), "
+"<option>Allow-Weak</option> (<option>allow-weak</option>) and <option>Allow-"
+"Downgrade-To-Insecure</option> (<option>allow-downgrade-to-insecure</"
+"option>) are boolean values which all default to <literal>no</literal>. If "
+"set to <literal>yes</literal> they circumvent parts of &apt-secure; and "
+"should therefore not be used lightly!"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Trusted</option> (<option>trusted</option>) is a tri-state value "
+"which defaults to APT deciding if a source is considered trusted or if "
+"warnings should be raised before e.g. packages are installed from this "
+"source. This option can be used to override that decision. The value "
+"<literal>yes</literal> tells APT always to consider this source as trusted, "
+"even if it doesn't pass authentication checks. It disables parts of &apt-"
+"secure;, and should therefore only be used in a local and trusted context "
+"(if at all) as otherwise security is breached. The value <literal>no</"
+"literal> does the opposite, causing the source to be handled as untrusted "
+"even if the authentication checks passed successfully. The default value "
+"can't be set explicitly."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Signed-By</option> (<option>signed-by</option>) is either an "
+"absolute path to a keyring file (has to be accessible and readable for the "
+"<literal>_apt</literal> user, so ensure everyone has read-permissions on the "
+"file) or one or more fingerprints of keys either in the <filename>trusted."
+"gpg</filename> keyring or in the keyrings in the <filename>trusted.gpg.d/</"
+"filename> directory (see <command>apt-key fingerprint</command>). If the "
+"option is set, only the key(s) in this keyring or only the keys with these "
+"fingerprints are used for the &apt-secure; verification of this repository. "
+"Defaults to the value of the option with the same name if set in the "
+"previously acquired <filename>Release</filename> file. Otherwise all keys "
+"in the trusted keyrings are considered valid signers for this repository."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Check-Valid-Until</option> (<option>check-valid-until</option>) is "
+"a yes/no value which controls if APT should try to detect replay attacks. A "
+"repository creator can declare a time until which the data provided in the "
+"repository should be considered valid, and if this time is reached, but no "
+"new data is provided, the data is considered expired and an error is "
+"raised. Besides increasing security, as a malicious attacker can't send old "
+"data forever to prevent a user from upgrading to a new version, this also "
+"helps users identify mirrors which are no longer updated. However, some "
+"repositories such as historic archives are not updated any more by design, "
+"so this check can be disabled by setting this option to <literal>no</"
+"literal>. Defaults to the value of configuration option <option>Acquire::"
+"Check-Valid-Until</option> which itself defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Valid-Until-Min</option> (<option>valid-until-min</option>) and "
+"<option>Valid-Until-Max</option> (<option>valid-until-max</option>) can be "
+"used to raise or lower the time period in seconds in which the data from "
+"this repository is considered valid. -Max can be especially useful if the "
+"repository provides no Valid-Until field on its Release file to set your own "
+"value, while -Min can be used to increase the valid time on seldom updated "
+"(local) mirrors of a more frequently updated but less accessible archive "
+"(which is in the sources.list as well) instead of disabling the check "
+"entirely. Default to the value of the configuration options "
+"<option>Acquire::Min-ValidTime</option> and <option>Acquire::Max-ValidTime</"
+"option> which are both unset by default."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "URI Specification"
+msgstr "Especificação da URI"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid "The currently recognized URI types are:"
+msgstr "Os tipos de URI actualmente reconhecidos são:"
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The file scheme allows an arbitrary directory in the file system to be "
+"considered an archive. This is useful for NFS mounts and local mirrors or "
+"archives."
+msgstr ""
+"O esquema file permite que um directório arbitrário do sistema de ficheiros "
+"seja considerado um arquivo. Isto é útil para montagens NFS e mirrors ou "
+"arquivos locais."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The cdrom scheme allows APT to use a local CD-ROM drive with media swapping. "
+"Use the &apt-cdrom; program to create cdrom entries in the source list."
+msgstr ""
+"O esquema cdrom permite ao APT usar uma drive de CD-ROM local com mudança de "
+"media. Use o programa &apt-cdrom; para criar entradas cdrom na lista de "
+"fontes."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The http scheme specifies an HTTP server for the archive. If an environment "
+"variable <envar>http_proxy</envar> is set with the format http://server:"
+"port/, the proxy server specified in <envar>http_proxy</envar> will be used. "
+"Users of authenticated HTTP/1.1 proxies may use a string of the format "
+"http://user:pass@server:port/. Note that this is an insecure method of "
+"authentication."
+msgstr ""
+"O esquema http especifica um servidor HTTP para o arquivo. Se uma variável "
+"de ambiente <envar>http_proxy</envar> estiver definida com o formato http://"
+"server:port/, será usado o servidor proxy especificado em <envar>http_proxy</"
+"envar>. Os utilizadores de proxies HTTP/1.1 autenticados pode usar uma "
+"string do formato http://user:pass@server:port/. Note que este não é um "
+"método de autenticação seguro."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The ftp scheme specifies an FTP server for the archive. APT's FTP behavior "
+"is highly configurable; for more information see the &apt-conf; manual page. "
+"Please note that an FTP proxy can be specified by using the "
+"<envar>ftp_proxy</envar> environment variable. It is possible to specify an "
+"HTTP proxy (HTTP proxy servers often understand FTP URLs) using this "
+"environment variable and <emphasis>only</emphasis> this environment "
+"variable. Proxies using HTTP specified in the configuration file will be "
+"ignored."
+msgstr ""
+"O esquema ftp especifica um servidor FTP para o arquivo. O comportamento FTP "
+"do APT é altamente configurável; para mais informação veja o manual do &apt-"
+"conf;. Por favor note que pode ser especificado um proxy FTP ao usar a "
+"variável de ambiente <envar>ftp_proxy</envar>. É possível especifica um "
+"proxy HTTP (os servidores proxy HTTP geralmente compreendem URLs de FTP) "
+"usando esta variável de ambiente e <emphasis>apenas</emphasis> esta variável "
+"de ambiente. Os proxies que usam HTTP especificados no ficheiro de "
+"configuração serão ignorados."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The copy scheme is identical to the file scheme except that packages are "
+"copied into the cache directory instead of used directly at their location. "
+"This is useful for people using removable media to copy files around with "
+"APT."
+msgstr ""
+"O esquema copy é idêntico ao esquema file com a excepção que os pacotes são "
+"copiados para o directório cache em vez serem usados directamente da sua "
+"localização. Isto é útil para quem use um meio amovível para copiar "
+"ficheiros com o APT."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access "
+"the files as a given user. Prior configuration of rhosts or RSA keys is "
+"recommended. The standard <command>find</command> and <command>dd</command> "
+"commands are used to perform the file transfers from the remote host."
+msgstr ""
+"O método rsh/ssh invoca RSH/SSH a ligar a uma máquina remota e aceder a "
+"ficheiros como um dado utilizador. É recomendada a configuração prévia de "
+"rhosts ou chaves RSA. Os comandos standard <command>find</command> e "
+"<command>dd</command> são usados para executar as transferências de "
+"ficheiros a partir da máquina remota."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
+#: sources.list.5.xml
+msgid "adding more recognizable URI types"
+msgstr "adicionando mais tipos de URI reconhecíveis"
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"APT can be extended with more methods shipped in other optional packages, "
+"which should follow the naming scheme <package>apt-transport-"
+"<replaceable>method</replaceable></package>. For instance, the APT team "
+"also maintains the package <package>apt-transport-https</package>, which "
+"provides access methods for HTTPS URIs with features similar to the http "
+"method. Methods for using e.g. debtorrent are also available - see &apt-"
+"transport-debtorrent;."
+msgstr ""
+"O APT pode ser estendido com mais métodos lançados em outros pacotes "
+"opcionais, que devem seguir o esquema de nomeação <literal>apt-transport-"
+"<replaceable>método</replaceable></literal>. Por exemplo, a equipa do APT "
+"também mantém o pacote <package>apt-transport-https</package>, o qual "
+"disponibiliza métodos de acesso para URIs HTTPS com funcionalidades "
+"semelhantes ao método http. Estão também disponíveis métodos para usar por "
+"exemplo o debtorrent - veja &apt-transport-debtorrent;."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses the archive stored locally (or NFS mounted) at /home/apt/debian for "
+"stable/main, stable/contrib, and stable/non-free."
+msgstr ""
+"Usa o arquivo armazenado localmente (ou montagem NFS) em /home/apt/debian "
+"para stable/main, stable/contrib, e stable/non-free."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb file:/home/apt/debian stable main contrib non-free"
+msgstr "deb file:/home/apt/debian stable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: stable\n"
+"Components: main contrib non-free"
+msgstr ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: stable\n"
+"Components: main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid "As above, except this uses the unstable (development) distribution."
+msgstr ""
+"Como em cima, excepto que usa a distribuição unstable (de desenvolvimento)."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb file:/home/apt/debian unstable main contrib non-free"
+msgstr "deb file:/home/apt/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
+msgstr ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "Source line for the above"
+msgid "Sources specification for the above."
+msgstr "Linha de fonte para o referido acima"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb-src file:/home/apt/debian unstable main contrib non-free"
+msgstr "deb-src file:/home/apt/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb-src\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
+msgstr ""
+"Types: deb-src\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"The first line gets package information for the architectures in "
+"<literal>APT::Architectures</literal> while the second always retrieves "
+"<literal>amd64</literal> and <literal>armel</literal>."
+msgstr ""
+"A primeira linha obtém a informação do pacote para a arquitectura em "
+"<literal>APT::Architectures</literal> enquanto a segunda obtém sempre "
+"<literal>amd64</literal> e <literal>armel</literal>."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"deb http://deb.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://deb.debian.org/debian &debian-stable-codename; main"
+msgstr ""
+"deb http://deb.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://deb.debian.org/debian &debian-stable-codename; main"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: main\n"
+"\n"
+"Types: deb\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: main\n"
+"Architectures: amd64 armel\n"
+msgstr ""
+"Types: deb\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: main\n"
+"\n"
+"Types: deb\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: main\n"
+"Architectures: amd64 armel\n"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses HTTP to access the archive at archive.debian.org, and uses only the "
+"hamm/main area."
+msgstr ""
+"Usa HTTP para aceder ao arquivo em archive.debian.org, e usa apenas a área "
+"hamm/main."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb http://archive.debian.org/debian-archive hamm main"
+msgstr "deb http://archive.debian.org/debian-archive hamm main"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: http://archive.debian.org/debian-archive\n"
+"Suites: hamm\n"
+"Components: main"
+msgstr ""
+"Types: deb\n"
+"URIs: http://archive.debian.org/debian-archive\n"
+"Suites: hamm\n"
+"Components: main"
projects / apt.git / blobdiff