msgstr ""
"Project-Id-Version: apt-doc 1.0.5\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2016-05-11 10:50+0200\n"
+"POT-Creation-Date: 2016-10-04 19:44+0200\n"
"PO-Revision-Date: 2014-11-15 17:26+0100\n"
"Last-Translator: Jean-Pierre Giraud <jean-pierregiraud@neuf.fr>\n"
"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
"nécessaire pour résoudre un conflit entre des paquets."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.8.xml
+#: apt.8.xml apt-key.8.xml
msgid ","
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
+#, fuzzy
+#| msgid ""
+#| "Show upgraded packages; print out a list of all packages that are to be "
+#| "upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
msgid ""
-"Show upgraded packages; print out a list of all packages that are to be "
-"upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
+"Do not show a list of all packages that are to be upgraded. Configuration "
+"Item: <literal>APT::Get::Show-Upgraded</literal>."
msgstr ""
"Afficher les paquets mis à niveau ; affiche une liste de tous les paquets à "
"mettre à niveau. Élément de configuration : <literal>APT::Get::Show-"
#: apt-get.8.xml
msgid ""
"Forbid the update command to acquire unverifiable data from configured "
-"sources. Apt will fail at the update command for repositories without valid "
-"cryptographically signatures. Configuration Item: <literal>Acquire::"
+"sources. APT will fail at the update command for repositories without valid "
+"cryptographically signatures. See also &apt-secure; for details on the "
+"concept and the implications. Configuration Item: <literal>Acquire::"
"AllowInsecureRepositories</literal>."
msgstr ""
"configuration : <literal>Dpkg::Progress</literal> et <literal>Dpkg::Progress-"
"Fancy</literal>."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"Adds the given file as a source for metadata. Can be repeated to add "
+"multiple files. See <option>--with-source</option> description in &apt-"
+"cache; for further details."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><title>
#: apt-get.8.xml apt-cache.8.xml apt-key.8.xml apt-mark.8.xml apt.conf.5.xml
#: apt_preferences.5.xml
msgid ""
"Per default <command>depends</command> and <command>rdepends</command> print "
"only dependencies explicitly expressed in the metadata. With this flag it "
-"will also show dependencies implicitely added based on the encountered "
-"data. A <literal>Conflicts: foo</literal> e.g. expresses implicitely that "
-"this package also conflicts with the package foo from any other "
-"architecture. Configuration Item: <literal>APT::Cache::ShowImplicit</"
-"literal>."
+"will also show dependencies implicitly added based on the encountered data. "
+"A <literal>Conflicts: foo</literal> e.g. expresses implicitly that this "
+"package also conflicts with the package foo from any other architecture. "
+"Configuration Item: <literal>APT::Cache::ShowImplicit</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
"<literal>rdepends</literal> aux paquets qui sont actuellement installés. "
"Élément de configuration : <literal>APT::Cache::Installed</literal>."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
+msgid ""
+"Adds the given file as a source for metadata. Can be repeated to add "
+"multiple files. Supported are currently <literal>*.deb</literal>, "
+"<literal>*.dsc</literal>, <literal>*.changes</literal>, <literal>Sources</"
+"literal> and <literal>Packages</literal> files as well as source package "
+"directories. Files are matched based on their name only, not their content!"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
+msgid ""
+"<literal>Sources</literal> and <literal>Packages</literal> can be compressed "
+"in any format apt supports as long as they have the correct extension. If "
+"you need to store multiple of these files in one directory you can prefix a "
+"name of your choice with the last character being an underscore "
+"(\"<literal>_</literal>\"). Example: my.example_Packages.xz"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
+#, fuzzy
+#| msgid ""
+#| "Use source index field ordering. Configuration Item: <literal>APT::"
+#| "SortPkgs::Source</literal>."
+msgid ""
+"Note that these sources are treated as trusted (see &apt-secure;). "
+"Configuration Item: <literal>APT::Sources::With</literal>."
+msgstr ""
+"Utiliser un index de sources pour le tri des champs. Élément de "
+"configuration : <literal>APT::SortPkgs::Source</literal>."
+
#. type: Content of: <refentry><refsect1><para>
#: apt-cache.8.xml
msgid "&apt-conf;, &sources-list;, &apt-get;"
"<command>apt-key</command> gère les clés dont se sert apt pour authentifier "
"les paquets. Les paquets authentifiés par ces clés seront réputés fiables."
+#. type: Content of: <refentry><refsect1><para>
+#: apt-key.8.xml
+msgid ""
+"Note that if usage of <command>apt-key</command> is desired the additional "
+"installation of the GNU Privacy Guard suite (packaged in <package>gnupg</"
+"package>) is required. For this reason alone the programmatic usage "
+"(especially in package maintainerscripts!) is strongly discouraged. Further "
+"more the output format of all commands is undefined and can and does change "
+"whenever the underlying commands change. <command>apt-key</command> will try "
+"to detect such usage and generates warnings on stderr in these cases."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><title>
#: apt-key.8.xml
msgid "Commands"
"otherwise the &apt-secure; infrastructure is completely undermined."
msgstr ""
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-key.8.xml
+msgid ""
+"Instead of using this command a keyring can be placed directly in the "
+"<filename>/etc/apt/trusted.gpg.d/</filename> directory with a descriptive "
+"name (same rules for filename apply as for &apt-conf; files) and "
+"\"<literal>gpg</literal>\" as file extension."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
msgid "Remove a key from the list of trusted keys."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
-msgid "List trusted keys."
+#, fuzzy
+#| msgid "List trusted keys."
+msgid "List trusted keys with fingerprints."
msgstr "Afficher la liste des clés fiables."
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml
-msgid "List fingerprints of trusted keys."
-msgstr "Afficher les empreintes des clés fiables."
-
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
msgid ""
"to completely undermine the &apt-secure; infrastructure if used without care."
msgstr ""
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt-key.8.xml
+msgid "(deprecated)"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
msgid ""
"literal> de la distribution, par exemple le paquet &keyring-package; dans "
"&keyring-distro;."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-key.8.xml
+msgid ""
+"Note that a distribution does not need to and in fact should not use this "
+"command any longer and instead ship keyring files in the <filename>/etc/apt/"
+"trusted.gpg</filename> directory directly as this avoids a dependency on "
+"<package>gnupg</package> and it is easier to manage keys by simply adding "
+"and removing files for maintainers and users alike."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
msgid ""
"gpg</filename> reste le fichier principal pour les clés donc, par exemple, "
"les nouvelles clés y seront ajoutées."
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml
-msgid "<filename>/etc/apt/trustdb.gpg</filename>"
-msgstr "<filename>/etc/apt/trustdb.gpg</filename>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml
-msgid "Local trust database of archive keys."
-msgstr "Base de données locale de fiabilité des clés de l'archive."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml
-msgid "&keyring-filename;"
-msgstr "&keyring-filename;"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml
-msgid "Keyring of &keyring-distro; archive trusted keys."
-msgstr "Trousseau des clés fiables de l'archive &keyring-distro;."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml
-msgid "&keyring-removed-filename;"
-msgstr "&keyring-removed-filename;"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml
-msgid "Keyring of &keyring-distro; archive removed trusted keys."
-msgstr "Trousseau des clés fiables supprimées de l'archive &keyring-distro;."
-
#. type: Content of: <refentry><refsect1><para>
#: apt-key.8.xml
msgid "&apt-get;, &apt-secure;"
"Starting with version 0.6, <command>APT</command> contains code that does "
"signature checking of the Release file for all repositories. This ensures "
"that data like packages in the archive can't be modified by people who have "
-"no access to the Release file signing key."
+"no access to the Release file signing key. Starting with version 1.1 "
+"<command>APT</command> requires repositories to provide recent "
+"authentication information for unimpeded usage of the repository."
msgstr ""
"Depuis sa version 0.6, <command>apt</command> sait vérifier la signature du "
"fichier Release de chaque archive. On s'assure ainsi que les paquets de "
#: apt-secure.8.xml
msgid ""
"If an archive has an unsigned Release file or no Release file at all current "
-"APT versions will raise a warning in <command>update</command> operations "
-"and front-ends like <command>apt-get</command> will require explicit "
-"confirmation if an installation request includes a package from such an "
-"unauthenticated archive."
+"APT versions will refuse to download data from them by default in "
+"<command>update</command> operations and even if forced to download front-"
+"ends like &apt-get; will require explicit confirmation if an installation "
+"request includes a package from such an unauthenticated archive."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
msgid ""
-"In the future APT will refuse to work with unauthenticated repositories by "
-"default until support for them is removed entirely. Users have the option to "
-"opt-in to this behavior already by setting the configuration option "
-"<option>Acquire::AllowInsecureRepositories</option> to <literal>false</"
-"literal>."
+"As a temporary exception &apt-get; (not &apt;!) raises warnings only if it "
+"encounters unauthenticated archives to give a slightly longer grace period "
+"on this backward compatibility effecting change. This exception will be "
+"removed in future releases and you can opt-out of this grace period by "
+"setting the configuration option <option>Binary::apt-get::Acquire::"
+"AllowInsecureRepositories</option> to <literal>false</literal> or <option>--"
+"no-allow-insecure-repositories</option> on the command line."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+msgid ""
+"You can force all APT clients to raise only warnings by setting the "
+"configuration option <option>Acquire::AllowInsecureRepositories</option> to "
+"<literal>true</literal>. Individual repositories can also be allowed to be "
+"insecure via the &sources-list; option <literal>allow-insecure=yes</"
+"literal>. Note that insecure repositories are strongly discouraged and all "
+"options to force apt to continue supporting them will eventually be "
+"removed. Users also have the <option>Trusted</option> option available to "
+"disable even the warnings, but be sure to understand the implications as "
+"detailed in &sources-list;."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+msgid ""
+"A repository which previously was authentication but would loose this state "
+"in an <command>update</command> operation raises an error in all APT clients "
+"irrespective of the option to allow or forbid usage of insecure "
+"repositories. The error can be overcome by additionally setting "
+"<option>Acquire::AllowDowngradeToInsecureRepositories</option> to "
+"<literal>true</literal> or for Individual repositories with the &sources-"
+"list; option <literal>allow-downgrade-to-insecure=yes</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
"les autres architectures sont ajoutées à la liste par défaut lorsqu'elles "
"sont enregistrées avec <command>dpkg --add-architecture</command>."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"This scope defines which compression formats are supported, how compression "
+"and decompression can be performed if support for this format isn't built "
+"into apt directly and a cost-value indicating how costly it is to compress "
+"something in this format. As an example the following configuration stanza "
+"would allow apt to download and uncompress as well as create and store files "
+"with the low-cost <literal>.reversed</literal> file extension which it will "
+"pass to the command <command>rev</command> without additional commandline "
+"parameters for compression and uncompression:"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><informalexample><programlisting>
+#: apt.conf.5.xml
+#, no-wrap
+msgid ""
+"APT::Compressor::rev {\n"
+"\tName \"rev\";\n"
+"\tExtension \".reversed\";\n"
+"\tBinary \"rev\";\n"
+"\tCompressArg {};\n"
+"\tUncompressArg {};\n"
+"\tCost \"10\";\n"
+"};\n"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>Acquire::http::Proxy-Auto-Detect</literal> can be used to "
+#| "specify an external command to discover the http proxy to use. Apt "
+#| "expects the command to output the proxy on stdout in the style "
+#| "<literal>http://proxy:port/</literal>. This will override the generic "
+#| "<literal>Acquire::http::Proxy</literal> but not any specific host proxy "
+#| "configuration set via <literal>Acquire::http::Proxy::$HOST</literal>. "
+#| "See the &squid-deb-proxy-client; package for an example implementation "
+#| "that uses avahi. This option takes precedence over the legacy option name "
+#| "<literal>ProxyAutoDetect</literal>."
msgid ""
"<literal>Acquire::http::Proxy-Auto-Detect</literal> can be used to specify "
-"an external command to discover the http proxy to use. Apt expects the "
-"command to output the proxy on stdout in the style <literal>http://proxy:"
-"port/</literal>. This will override the generic <literal>Acquire::http::"
-"Proxy</literal> but not any specific host proxy configuration set via "
-"<literal>Acquire::http::Proxy::$HOST</literal>. See the &squid-deb-proxy-"
-"client; package for an example implementation that uses avahi. This option "
-"takes precedence over the legacy option name <literal>ProxyAutoDetect</"
-"literal>."
+"an external command to discover the http proxy to use. The first and only "
+"parameter is an URI denoting the host to be contacted to allow for host-"
+"specific configuration. APT expects the command to output the proxy on "
+"stdout as a single line in the style <literal>http://proxy:port/</literal> "
+"or the word <literal>DIRECT</literal> if no proxy should be used. No output "
+"indicates that the generic proxy settings should be used. Note that auto-"
+"detection will not be used for a host if a host-specific proxy configuration "
+"is already set via <literal>Acquire::http::Proxy::<replaceable>HOST</"
+"replaceable></literal>. See the &squid-deb-proxy-client; package for an "
+"example implementation that uses avahi. This option takes precedence over "
+"the legacy option name <literal>ProxyAutoDetect</literal>."
msgstr ""
"L'option <literal>Acquire::http::Proxy-Auto-Detect</literal> peut être "
"utilisée pour indiquer une commande externe pour découvrir le mandataire "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "List of compression types which are understood by the acquire methods. "
+#| "Files like <filename>Packages</filename> can be available in various "
+#| "compression formats. By default the acquire methods can decompress "
+#| "<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
+#| "command> compressed files; with this setting more formats can be added on "
+#| "the fly or the used method can be changed. The syntax for this is: "
+#| "<placeholder type=\"synopsis\" id=\"0\"/>"
msgid ""
"List of compression types which are understood by the acquire methods. "
"Files like <filename>Packages</filename> can be available in various "
-"compression formats. By default the acquire methods can decompress "
-"<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
-"command> compressed files; with this setting more formats can be added on "
-"the fly or the used method can be changed. The syntax for this is: "
-"<placeholder type=\"synopsis\" id=\"0\"/>"
+"compression formats. By default the acquire methods can decompress and "
+"recompress many common formats like <command>xz</command> and <command>gzip</"
+"command>; with this scope the supported formats can be queried, modified as "
+"well as support for more formats added (see also <option>APT::Compressor</"
+"
option>). The syntax for this is: <placeholder type=\"synopsis\" id=\"0\"/>"
msgstr ""
"Cette option indique la liste des types de compression comprises par les "
"méthodes d'acquisition. Des fichiers comme <filename>Packages</filename> "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
#: apt.conf.5.xml
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
+#, fuzzy, no-wrap
+#| msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
+msgid "Acquire::CompressionTypes::Order { \"xz\"; \"gz\"; };"
msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "Also, the <literal>Order</literal> subgroup can be used to define in "
+#| "which order the acquire system will try to download the compressed files. "
+#| "The acquire system will try the first and proceed with the next "
+#| "compression type in this list on error, so to prefer one over the other "
+#| "type simply add the preferred type first - default types not already "
+#| "added will be implicitly appended to the end of the list, so e.g. "
+#| "<placeholder type=\"synopsis\" id=\"0\"/> can be used to prefer "
+#| "<command>gzip</command> compressed files over <command>bzip2</command> "
+#| "and <command>lzma</command>. If <command>lzma</command> should be "
+#| "preferred over <command>gzip</command> and <command>bzip2</command> the "
+#| "configure setting should look like this: <placeholder type=\"synopsis\" "
+#| "id=\"1\"/> It is not needed to add <literal>bz2</literal> to the list "
+#| "explicitly as it will be added automatically."
msgid ""
"Also, the <literal>Order</literal> subgroup can be used to define in which "
"order the acquire system will try to download the compressed files. The "
"acquire system will try the first and proceed with the next compression type "
"in this list on error, so to prefer one over the other type simply add the "
-"preferred type first - default types not already added will be implicitly "
-"appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
-"\"0\"/> can be used to prefer <command>gzip</command> compressed files over "
-"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</"
-"command> should be preferred over <command>gzip</command> and "
-"<command>bzip2</command> the configure setting should look like this: "
-"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add "
-"<literal>bz2</literal> to the list explicitly as it will be added "
-"automatically."
+"preferred type first - types not already added will be implicitly appended "
+"to the end of the list, so e.g. <placeholder type=\"synopsis\" id=\"0\"/> "
+"can be used to prefer <command>gzip</command> compressed files over all "
+"other compression formats. If <command>xz</command> should be preferred "
+"over <command>gzip</command> and <command>bzip2</command> the configure "
+"setting should look like this: <placeholder type=\"synopsis\" id=\"1\"/> It "
+"is not needed to add <literal>bz2</literal> to the list explicitly as it "
+"will be added automatically."
msgstr ""
"Le sous-groupe <literal>Order</literal> peut être également utilisé pour "
"définir l'ordre dans lequel le système d'acquisition tentera de télécharger "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
+#| "literal> will be checked at run time. If this option has been set, the "
+#| "method will only be used if this file exists; e.g. for the "
+#| "<literal>bzip2</literal> method (the inbuilt) setting is: <placeholder "
+#| "type=\"literallayout\" id=\"0\"/> Note also that list entries specified "
+#| "on the command line will be added at the end of the list specified in the "
+#| "configuration files, but before the default entries. To prefer a type in "
+#| "this case over the ones specified in the configuration files you can set "
+#| "the option direct - not in list style. This will not override the "
+#| "defined list; it will only prefix the list with this type."
msgid ""
"Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
-"literal> will be checked at run time. If this option has been set, the "
-"method will only be used if this file exists; e.g. for the <literal>bzip2</"
-"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout"
-"\" id=\"0\"/> Note also that list entries specified on the command line will "
-"be added at the end of the list specified in the configuration files, but "
-"before the default entries. To prefer a type in this case over the ones "
-"specified in the configuration files you can set the option direct - not in "
-"list style. This will not override the defined list; it will only prefix "
-"the list with this type."
+"literal> will be checked at run time. If this option has been set and "
+"support for this format isn't directly built into apt, the method will only "
+"be used if this file exists; e.g. for the <literal>bzip2</literal> method "
+"(the inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> "
+"Note also that list entries specified on the command line will be added at "
+"the end of the list specified in the configuration files, but before the "
+"default entries. To prefer a type in this case over the ones specified in "
+"the configuration files you can set the option direct - not in list style. "
+"This will not override the defined list; it will only prefix the list with "
+"this type."
msgstr ""
"Veuillez noter que <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
"literal> sera contrôlé : si cette option est utilisée, la méthode ne sera "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
-"Allow the update operation to load data files from a repository without a "
-"trusted signature. If enabled this option no data files will be loaded and "
-"the update operation fails with a error for this source. The default is "
-"false for backward compatibility. This will be changed in the future."
+"Allow update operations to load data files from repositories without "
+"sufficient security information. The default value is \"<literal>false</"
+"literal>\". Concept, implications as well as alternatives are detailed in "
+"&apt-secure;."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"Allow update operations to load data files from repositories which provide "
+"security information, but these are deemed no longer cryptographically "
+"strong enough. The default value is \"<literal>false</literal>\". Concept, "
+"implications as well as alternatives are detailed in &apt-secure;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
"Allow that a repository that was previously gpg signed to become unsigned "
-"durign a update operation. When there is no valid signature of a perviously "
-"trusted repository apt will refuse the update. This option can be used to "
-"override this protection. You almost certainly never want to enable this. "
-"The default is false. Note that apt will still consider packages from this "
-"source untrusted and warn about them if you try to install them."
+"during an update operation. When there is no valid signature for a "
+"previously trusted repository apt will refuse the update. This option can be "
+"used to override this protection. You almost certainly never want to enable "
+"this. The default is <literal>false</literal>. Concept, implications as "
+"well as alternatives are detailed in &apt-secure;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
"paquets ; par défaut la signature est désactivée et tous les binaires sont "
"créés."
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt.conf.5.xml
-msgid "dpkg trigger usage (and related options)"
-msgstr ""
-"utilisation des actions différées (« triggers ») de dpkg (et options "
-"associées)"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml
-msgid ""
-"APT can call &dpkg; in such a way as to let it make aggressive use of "
-"triggers over multiple calls of &dpkg;. Without further options &dpkg; will "
-"use triggers once each time it runs. Activating these options can therefore "
-"decrease the time needed to perform the install or upgrade. Note that it is "
-"intended to activate these options per default in the future, but as it "
-"drastically changes the way APT calls &dpkg; it needs a lot more testing. "
-"<emphasis>These options are therefore currently experimental and should not "
-"be used in production environments.</emphasis> It also breaks progress "
-"reporting such that all front-ends will currently stay around half (or more) "
-"of the time in the 100% state while it actually configures all packages."
-msgstr ""
-"APT peut lancer &dpkg; pour utiliser les actions différées de manière "
-"agressive entre les appels successifs à &dpkg;. Sans options "
-"supplémentaires, &dpkg; utilisera les actions différées une fois à chacune "
-"de ses exécutions. Si ces options sont utilisées, le temps d'exécution peut "
-"diminuer fortement dans les actions d'installation ou de mise à jour. Il est "
-"prévu de les activer par défaut dans le futur mais étant donné qu'elles "
-"changent notablement la méthode qu'utilise APT pour lancer &dpkg;, elles ont "
-"besoin d'importantes validations. <emphasis>Ces options sont donc "
-"expérimentales et ne devraient pas être utilisées avec des environnements de "
-"production.</emphasis>. Elles modifient également le suivi de progression et "
-"toutes les interfaces passeront la moitié du temps à un état terminé à 100% "
-"pendant la configuration des paquets."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><literallayout>
-#: apt.conf.5.xml
-#, no-wrap
-msgid ""
-"DPkg::NoTriggers \"true\";\n"
-"PackageManager::Configure \"smart\";\n"
-"DPkg::ConfigurePending \"true\";\n"
-"DPkg::TriggersPending \"true\";"
-msgstr ""
-"DPkg::NoTriggers \"true\";\n"
-"PackageManager::Configure \"smart\";\n"
-"DPkg::ConfigurePending \"true\";\n"
-"DPkg::TriggersPending \"true\";"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml
-msgid ""
-"Note that it is not guaranteed that APT will support these options or that "
-"these options will not cause (big) trouble in the future. If you have "
-"understand the current risks and problems with these options, but are brave "
-"enough to help testing them, create a new configuration file and test a "
-"combination of options. Please report any bugs, problems and improvements "
-"you encounter and make sure to note which options you have used in your "
-"reports. Asking &dpkg; for help could also be useful for debugging proposes, "
-"see e.g. <command>dpkg --audit</command>. A defensive option combination "
-"would be <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-"Veuillez noter que rien ne garantit qu'APT gérera encore ces options dans le "
-"futur ou qu'elles ne provoqueront pas de nombreux dégâts. Si vous avez bien "
-"compris les implications de ce choix et êtes suffisamment motivé(e) pour "
-"essayer ces options, il vous est donc possible de créer un nouveau fichier "
-"de configuration et essayer une combinaison de ces options. Veuillez "
-"signaler tout bogue, problèmes ou suggestions d'amélioration en prenant soin "
-"de mentionner les options utilisées. Utiliser l'aide apportée par &dpkg; "
-"peut également être utile pour le débogage, par exemple <command>dpkg --"
-"audit</command>. Une combinaison intéressante d'options pourrait être "
-"<placeholder type=\"literallayout\" id=\"0\"/>."
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml
-msgid ""
-"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending "
-"call). See &dpkg; if you are interested in what this actually means. In "
-"short: &dpkg; will not run the triggers when this flag is present unless it "
-"is explicitly called to do so in an extra call. Note that this option "
-"exists (undocumented) also in older APT versions with a slightly different "
-"meaning: Previously these option only append --no-triggers to the configure "
-"calls to &dpkg; - now APT will also add this flag to the unpack and remove "
-"calls."
-msgstr ""
-"Ajoute l'option « no-triggers » à tous les appels à &dpkg; (hormis l'appel "
-"« ConfigurePending »). Voir &dpkg; pour plus d'informations sur la "
-"signification de cette option. En résumé, &dpkg; n'effectuera pas les "
-"actions différées (« triggers ») si cette option est utilisée sauf si cela "
-"est demandé explicitement dans une invocation supplémentaire. Cette option "
-"existe en fait déjà (mais n'est pas documentée) dans de plus anciennes "
-"version d'APT avec une signification légèrement différente : elle n'ajoutait "
-"l'option « --no-triggers » qu'aux appels de &dpkg; avec « configure » alors "
-"que cela sera désormais utilisé également avec les appels à &dpkg; avec les "
-"options « unpack » et « remove »."
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml
-msgid ""
-"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
-"and \"<literal>no</literal>\". The default value is \"<literal>all</literal>"
-"\", which causes APT to configure all packages. The \"<literal>smart</"
-"literal>\" way is to configure only packages which need to be configured "
-"before another package can be unpacked (Pre-Depends), and let the rest be "
-"configured by &dpkg; with a call generated by the ConfigurePending option "
-"(see below). On the other hand, \"<literal>no</literal>\" will not configure "
-"anything, and totally relies on &dpkg; for configuration (which at the "
-"moment will fail if a Pre-Depends is encountered). Setting this option to "
-"any value other than <literal>all</literal> will implicitly also activate "
-"the next option by default, as otherwise the system could end in an "
-"unconfigured and potentially unbootable state."
-msgstr ""
-"Les valeurs possibles sont « <literal>all</literal> », « <literal>smart</"
-"literal> » et « <literal>no</literal> ». La valeur par défaut est "
-"« <literal>all</literal> » où APT configure tous les paquets. La valeur "
-"« <literal>smart</literal> » permet de ne configurer que les paquets qui ont "
-"besoin de l'être avant la décompaction d'un autre paquet (à cause d'une pré-"
-"dépendance) ; les autres configurations sont laissées pour un appel "
-"ultérieur à &dpkg; via un appel créé par l'option ConfigurePending (voir "
-"plus loin). L'option « <literal>no</literal> » ne provoquera aucune "
-"configuration et s'en remettra totalement à &dpkg; pour ces opérations (ce "
-"qui échouera en cas de pré-dépendances). Si cette option est définie sur une "
-"valeur différente de « <literal>all</literal> », l'option suivante sera "
-"activée par défaut pour éviter de placer le système dans un état non "
-"configuré et donc éventuellement non amorçable."
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "If this option is set APT will call <command>dpkg --configure --pending</"
+#| "command> to let &dpkg; handle all required configurations and triggers. "
+#| "This option is activated automatically per default if the previous option "
+#| "is not set to <literal>all</literal>, but deactivating it could be useful "
+#| "if you want to run APT multiple times in a row - e.g. in an installer. In "
+#| "these sceneries you could deactivate this option in all but the last run."
msgid ""
"If this option is set APT will call <command>dpkg --configure --pending</"
"command> to let &dpkg; handle all required configurations and triggers. This "
-"option is activated automatically per default if the previous option is not "
-"set to <literal>all</literal>, but deactivating it could be useful if you "
-"want to run APT multiple times in a row - e.g. in an installer. In these "
-"sceneries you could deactivate this option in all but the last run."
+"option is activated by default, but deactivating it could be useful if you "
+"want to run APT multiple times in a row - e.g. in an installer. In this "
+"scenario you could deactivate this option in all but the last run."
msgstr ""
"Si cette option est choisie, APT lancera <command>dpkg --configure --"
"pending</command> pour laisser &dpkg; gérer les configurations de paquets et "
"d'installation. Dans ce cas, seul le dernier de tous les appels successifs "
"peut conserver l'option active."
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml
-msgid ""
-"Useful for the <literal>smart</literal> configuration as a package which has "
-"pending triggers is not considered as <literal>installed</literal>, and "
-"&dpkg; treats them as <literal>unpacked</literal> currently which is a "
-"showstopper for Pre-Dependencies (see debbugs #526774). Note that this will "
-"process all triggers, not only the triggers needed to configure this package."
-msgstr ""
-"Cette option est utile pour la configuration en mode « <literal>smart</"
-"literal> ». En effet, un paquet qui a des actions différées (« triggers ») "
-"en attente n'est pas considéré comme installé (état « <literal>installed</"
-"literal> ») et &dpkg; le considère actuellement comme simplement décompacté "
-"(état « <literal>unpacked</literal> ») ce qui empêche une gestion correcte "
-"des pré-dépendances (voir le bogue Debian #526774). Veuillez noter que cette "
-"option provoquera la gestion de toutes les actions différées, pas seulement "
-"celles concernant le paquet en cours de traitement."
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml
-#, no-wrap
-msgid ""
-"OrderList::Score {\n"
-"\tDelete 500;\n"
-"\tEssential 200;\n"
-"\tImmediate 10;\n"
-"\tPreDepends 50;\n"
-"};"
-msgstr ""
-"OrderList::Score {\n"
-"\tDelete 500;\n"
-"\tEssential 200;\n"
-"\tImmediate 10;\n"
-"\tPreDepends 50;\n"
-"};"
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml
-msgid ""
-"Essential packages (and their dependencies) should be configured immediately "
-"after unpacking. It is a good idea to do this quite early in the upgrade "
-"process as these configure calls also currently require <literal>DPkg::"
-"TriggersPending</literal> which will run quite a few triggers (which may not "
-"be needed). Essentials get per default a high score but the immediate flag "
-"is relatively low (a package which has a Pre-Depends is rated higher). "
-"These option and the others in the same group can be used to change the "
-"scoring. The following example shows the settings with their default "
-"values. <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-"Les paquets essentiels (et leurs dépendances) devraient être configurés "
-"après avoir été décompressés. Il est conseillé que cette opération ait lieu "
-"le plus tôt possible dans le processus de mise à jour car ces opérations de "
-"configuration nécessitent également <literal>DPkg::TriggersPending</"
-"literal>, ce qui peut conduire à l'exécution de certains actions différées "
-"qui ne sont pas nécessairement utiles. Les paquets essentiels obtiennent par "
-"défaut un score élevé mais le marqueur « immédiat » implique un score assez "
-"bas (par exemple un paquet qui comporte des prédépendances obtient un score "
-"plus élevé). Cette option et les options du même groupe permettent de "
-"modifier la façon d'attribuer un score. L'exemple ci-dessous indique ces "
-"réglages avec leurs valeurs par défaut. <placeholder type=\"literallayout\" "
-"id=\"0\"/>"
-
#. type: Content of: <refentry><refsect1><title>
#: apt.conf.5.xml
msgid "Periodic and Archives options"
msgid ""
"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups "
"of options configure behavior of apt periodic updates, which is done by the "
-"<literal>/etc/cron.daily/apt</literal> script. See the top of this script "
-"for the brief documentation of these options."
+"<literal>/usr/lib/apt/apt.systemd.daily</literal> script. See the top of "
+"this script for the brief documentation of these options."
msgstr ""
"Les groupes d'options <literal>APT::Periodic</literal> et <literal>APT::"
"Archive</literal> configurent les comportements périodiques réalisés par le "
-"script <literal>/etc/cron.daily/apt</literal>, lancé quotidiennement."
+"script <literal>/usr/lib/apt/apt.systemd.daily</literal>, lancé "
+"quotidiennement."
#. type: Content of: <refentry><refsect1><title>
#: apt.conf.5.xml
"detect and error out on such anomalies."
msgstr ""
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Allow-Insecure</option> (<option>allow-insecure</option>), "
+"<option>Allow-Weak</option> (<option>allow-weak</option>) and <option>Allow-"
+"Downgrade-To-Insecure</option> (<option>allow-downgrade-to-insecure</"
+"option>) are boolean values which all default to <literal>no</literal>. If "
+"set to <literal>yes</literal> they circumvent parts of &apt-secure; and "
+"should therefore not be used lightly!"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
#: sources.list.5.xml
msgid ""
#| "deb http://ftp.debian.org/debian &debian-stable-codename; main\n"
#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main"
msgid ""
-"deb http://httpredir.debian.org/debian &debian-stable-codename; main\n"
-"deb [ arch=amd64,armel ] http://httpredir.debian.org/debian &debian-stable-codename; main"
+"deb http://deb.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://deb.debian.org/debian &debian-stable-codename; main"
msgstr ""
"deb http://ftp.debian.org/debian &debian-stable-codename; main\n"
"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main"
#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main"
msgid ""
"Types: deb\n"
-"URIs: http://httpredir.debian.org/debian\n"
+"URIs: http://deb.debian.org/debian\n"
"Suites: &debian-stable-codename;\n"
"Components: main\n"
"\n"
"Types: deb\n"
-"URIs: http://httpredir.debian.org/debian\n"
+"URIs: http://deb.debian.org/debian\n"
"Suites: &debian-stable-codename;\n"
"Components: main\n"
"Architectures: amd64 armel\n"
#: sources.list.5.xml
#, no-wrap
msgid ""
-"deb http://httpredir.debian.org/debian stable main contrib\n"
-"deb-src http://httpredir.debian.org/debian stable main contrib\n"
-"deb http://httpredir.debian.org/debian testing main contrib\n"
-"deb-src http://httpredir.debian.org/debian testing main contrib\n"
-"deb http://httpredir.debian.org/debian unstable main contrib\n"
-"deb-src http://httpredir.debian.org/debian unstable main contrib"
+"deb http://deb.debian.org/debian stable main contrib\n"
+"deb-src http://deb.debian.org/debian stable main contrib\n"
+"deb http://deb.debian.org/debian testing main contrib\n"
+"deb-src http://deb.debian.org/debian testing main contrib\n"
+"deb http://deb.debian.org/debian unstable main contrib\n"
+"deb-src http://deb.debian.org/debian unstable main contrib"
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
#, no-wrap
msgid ""
"Types: deb deb-src\n"
-"URIs: http://httpredir.debian.org/debian\n"
+"URIs: http://deb.debian.org/debian\n"
"Suites: stable testing unstable\n"
"Components: main contrib\n"
msgstr ""
msgid ""
"The <literal>release</literal> command generates a Release file from a "
"directory tree. It recursively searches the given directory for uncompressed "
-"<filename>Packages</filename> and <filename>Sources</filename> files and "
-"ones compressed with <command>gzip</command>, <command>bzip2</command> or "
-"<command>lzma</command> as well as <filename>Release</filename> and "
-"<filename>md5sum.txt</filename> files by default (<literal>APT::FTPArchive::"
-"Release::Default-Patterns</literal>). Additional filename patterns can be "
-"added by listing them in <literal>APT::FTPArchive::Release::Patterns</"
-"literal>. It then writes to stdout a <filename>Release</filename> file "
-"containing (by default) an MD5, SHA1, SHA256 and SHA512 digest for each file."
+"and compressed <filename>Packages</filename>, <filename>Sources</filename>, "
+"<filename>Contents</filename>, <filename>Components</filename> and "
+"<filename>icons</filename> files as well as <filename>Release</filename>, "
+"<filename>Index</filename> and <filename>md5sum.txt</filename> files by "
+"default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). "
+"Additional filename patterns can be added by listing them in <literal>APT::"
+"FTPArchive::Release::Patterns</literal>. It then writes to stdout a "
+"<filename>Release</filename> file containing (by default) an MD5, SHA1, "
+"SHA256 and SHA512 digest for each file."
msgstr ""
"La commande <literal>release</literal> crée un fichier Release à partir "
"d'une arborescence. Elle recherche récursivement dans le répertoire indiqué "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "Values for the additional metadata fields in the Release file are taken "
+#| "from the corresponding variables under <literal>APT::FTPArchive::Release</"
+#| "literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
+#| "supported fields are: <literal>Origin</literal>, <literal>Label</"
+#| "literal>, <literal>Suite</literal>, <literal>Version</literal>, "
+#| "<literal>Codename</literal>, <literal>Date</literal>, <literal>Valid-"
+#| "Until</literal>, <literal>Architectures</literal>, <literal>Components</"
+#| "literal>, <literal>Description</literal>."
msgid ""
"Values for the additional metadata fields in the Release file are taken from "
"the corresponding variables under <literal>APT::FTPArchive::Release</"
-"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
-"supported fields are: <literal>Origin</literal>, <literal>Label</literal>, "
+"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
+"supported fields are <literal>Origin</literal>, <literal>Label</literal>, "
"<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</"
"literal>, <literal>Date</literal>, <literal>Valid-Until</literal>, "
-"<literal>Architectures</literal>, <literal>Components</literal>, "
-"<literal>Description</literal>."
+"<literal>Signed-By</literal>, <literal>Architectures</literal>, "
+"<literal>Components</literal> and <literal>Description</literal>."
msgstr ""
"La valeur des autres champs de métadonnées du fichier Release sont tirées de "
"la valeur correspondante dans <literal>APT::FTPArchive::Release</literal>, "
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
#: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "Sets the default compression schemes to use for the package index files. "
+#| "It is a string that contains a space separated list of at least one of: "
+#| "'.' (no compression), 'gzip' and 'bzip2'. The default for all compression "
+#| "schemes is '. gzip'."
msgid ""
"Sets the default compression schemes to use for the package index files. It "
-"is a string that contains a space separated list of at least one of: '.' (no "
-"compression), 'gzip' and 'bzip2'. The default for all compression schemes is "
-"'. gzip'."
+"is a string that contains a space separated list of at least one of the "
+"compressors configured via the <option>APT::Compressor</option> "
+"configuration scope. The default for all compression schemes is '. gzip'."
msgstr ""
"Indique comment sont compressés les fichiers d'index. C'est une chaîne qui "
"contient des valeurs séparées par des espaces ; elle contient au moins l'une "
msgid "Which will use the already fetched archives on the disc."
msgstr "Cette commande utilisera les fichiers récupérés sur le disque."
+#~ msgid "dpkg trigger usage (and related options)"
+#~ msgstr ""
+#~ "utilisation des actions différées (« triggers ») de dpkg (et options "
+#~ "associées)"
+
+#~ msgid ""
+#~ "APT can call &dpkg; in such a way as to let it make aggressive use of "
+#~ "triggers over multiple calls of &dpkg;. Without further options &dpkg; "
+#~ "will use triggers once each time it runs. Activating these options can "
+#~ "therefore decrease the time needed to perform the install or upgrade. "
+#~ "Note that it is intended to activate these options per default in the "
+#~ "future, but as it drastically changes the way APT calls &dpkg; it needs a "
+#~ "lot more testing. <emphasis>These options are therefore currently "
+#~ "experimental and should not be used in production environments.</"
+#~ "emphasis> It also breaks progress reporting such that all front-ends will "
+#~ "currently stay around half (or more) of the time in the 100% state while "
+#~ "it actually configures all packages."
+#~ msgstr ""
+#~ "APT peut lancer &dpkg; pour utiliser les actions différées de manière "
+#~ "agressive entre les appels successifs à &dpkg;. Sans options "
+#~ "supplémentaires, &dpkg; utilisera les actions différées une fois à "
+#~ "chacune de ses exécutions. Si ces options sont utilisées, le temps "
+#~ "d'exécution peut diminuer fortement dans les actions d'installation ou de "
+#~ "mise à jour. Il est prévu de les activer par défaut dans le futur mais "
+#~ "étant donné qu'elles changent notablement la méthode qu'utilise APT pour "
+#~ "lancer &dpkg;, elles ont besoin d'importantes validations. <emphasis>Ces "
+#~ "options sont donc expérimentales et ne devraient pas être utilisées avec "
+#~ "des environnements de production.</emphasis>. Elles modifient également "
+#~ "le suivi de progression et toutes les interfaces passeront la moitié du "
+#~ "temps à un état terminé à 100% pendant la configuration des paquets."
+
+#~ msgid ""
+#~ "DPkg::NoTriggers \"true\";\n"
+#~ "PackageManager::Configure \"smart\";\n"
+#~ "DPkg::ConfigurePending \"true\";\n"
+#~ "DPkg::TriggersPending \"true\";"
+#~ msgstr ""
+#~ "DPkg::NoTriggers \"true\";\n"
+#~ "PackageManager::Configure \"smart\";\n"
+#~ "DPkg::ConfigurePending \"true\";\n"
+#~ "DPkg::TriggersPending \"true\";"
+
+#~ msgid ""
+#~ "Note that it is not guaranteed that APT will support these options or "
+#~ "that these options will not cause (big) trouble in the future. If you "
+#~ "have understand the current risks and problems with these options, but "
+#~ "are brave enough to help testing them, create a new configuration file "
+#~ "and test a combination of options. Please report any bugs, problems and "
+#~ "improvements you encounter and make sure to note which options you have "
+#~ "used in your reports. Asking &dpkg; for help could also be useful for "
+#~ "debugging proposes, see e.g. <command>dpkg --audit</command>. A defensive "
+#~ "option combination would be <placeholder type=\"literallayout\" id=\"0\"/>"
+#~ msgstr ""
+#~ "Veuillez noter que rien ne garantit qu'APT gérera encore ces options dans "
+#~ "le futur ou qu'elles ne provoqueront pas de nombreux dégâts. Si vous avez "
+#~ "bien compris les implications de ce choix et êtes suffisamment motivé(e) "
+#~ "pour essayer ces options, il vous est donc possible de créer un nouveau "
+#~ "fichier de configuration et essayer une combinaison de ces options. "
+#~ "Veuillez signaler tout bogue, problèmes ou suggestions d'amélioration en "
+#~ "prenant soin de mentionner les options utilisées. Utiliser l'aide "
+#~ "apportée par &dpkg; peut également être utile pour le débogage, par "
+#~ "exemple <command>dpkg --audit</command>. Une combinaison intéressante "
+#~ "d'options pourrait être <placeholder type=\"literallayout\" id=\"0\"/>."
+
+#~ msgid ""
+#~ "Add the no triggers flag to all &dpkg; calls (except the ConfigurePending "
+#~ "call). See &dpkg; if you are interested in what this actually means. In "
+#~ "short: &dpkg; will not run the triggers when this flag is present unless "
+#~ "it is explicitly called to do so in an extra call. Note that this option "
+#~ "exists (undocumented) also in older APT versions with a slightly "
+#~ "different meaning: Previously these option only append --no-triggers to "
+#~ "the configure calls to &dpkg; - now APT will also add this flag to the "
+#~ "unpack and remove calls."
+#~ msgstr ""
+#~ "Ajoute l'option « no-triggers » à tous les appels à &dpkg; (hormis "
+#~ "l'appel « ConfigurePending »). Voir &dpkg; pour plus d'informations sur "
+#~ "la signification de cette option. En résumé, &dpkg; n'effectuera pas les "
+#~ "actions différées (« triggers ») si cette option est utilisée sauf si "
+#~ "cela est demandé explicitement dans une invocation supplémentaire. Cette "
+#~ "option existe en fait déjà (mais n'est pas documentée) dans de plus "
+#~ "anciennes version d'APT avec une signification légèrement différente : "
+#~ "elle n'ajoutait l'option « --no-triggers » qu'aux appels de &dpkg; avec "
+#~ "« configure » alors que cela sera désormais utilisé également avec les "
+#~ "appels à &dpkg; avec les options « unpack » et « remove »."
+
+#~ msgid ""
+#~ "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
+#~ "and \"<literal>no</literal>\". The default value is \"<literal>all</"
+#~ "literal>\", which causes APT to configure all packages. The "
+#~ "\"<literal>smart</literal>\" way is to configure only packages which need "
+#~ "to be configured before another package can be unpacked (Pre-Depends), "
+#~ "and let the rest be configured by &dpkg; with a call generated by the "
+#~ "ConfigurePending option (see below). On the other hand, \"<literal>no</"
+#~ "literal>\" will not configure anything, and totally relies on &dpkg; for "
+#~ "configuration (which at the moment will fail if a Pre-Depends is "
+#~ "encountered). Setting this option to any value other than <literal>all</"
+#~ "literal> will implicitly also activate the next option by default, as "
+#~ "otherwise the system could end in an unconfigured and potentially "
+#~ "unbootable state."
+#~ msgstr ""
+#~ "Les valeurs possibles sont « <literal>all</literal> », « <literal>smart</"
+#~ "literal> » et « <literal>no</literal> ». La valeur par défaut est "
+#~ "« <literal>all</literal> » où APT configure tous les paquets. La valeur "
+#~ "« <literal>smart</literal> » permet de ne configurer que les paquets qui "
+#~ "ont besoin de l'être avant la décompaction d'un autre paquet (à cause "
+#~ "d'une pré-dépendance) ; les autres configurations sont laissées pour un "
+#~ "appel ultérieur à &dpkg; via un appel créé par l'option ConfigurePending "
+#~ "(voir plus loin). L'option « <literal>no</literal> » ne provoquera aucune "
+#~ "configuration et s'en remettra totalement à &dpkg; pour ces opérations "
+#~ "(ce qui échouera en cas de pré-dépendances). Si cette option est définie "
+#~ "sur une valeur différente de « <literal>all</literal> », l'option "
+#~ "suivante sera activée par défaut pour éviter de placer le système dans un "
+#~ "état non configuré et donc éventuellement non amorçable."
+
+#~ msgid ""
+#~ "Useful for the <literal>smart</literal> configuration as a package which "
+#~ "has pending triggers is not considered as <literal>installed</literal>, "
+#~ "and &dpkg; treats them as <literal>unpacked</literal> currently which is "
+#~ "a showstopper for Pre-Dependencies (see debbugs #526774). Note that this "
+#~ "will process all triggers, not only the triggers needed to configure this "
+#~ "package."
+#~ msgstr ""
+#~ "Cette option est utile pour la configuration en mode « <literal>smart</"
+#~ "literal> ». En effet, un paquet qui a des actions différées "
+#~ "(« triggers ») en attente n'est pas considéré comme installé (état "
+#~ "« <literal>installed</literal> ») et &dpkg; le considère actuellement "
+#~ "comme simplement décompacté (état « <literal>unpacked</literal> ») ce qui "
+#~ "empêche une gestion correcte des pré-dépendances (voir le bogue Debian "
+#~ "#526774). Veuillez noter que cette option provoquera la gestion de toutes "
+#~ "les actions différées, pas seulement celles concernant le paquet en cours "
+#~ "de traitement."
+
+#~ msgid ""
+#~ "OrderList::Score {\n"
+#~ "\tDelete 500;\n"
+#~ "\tEssential 200;\n"
+#~ "\tImmediate 10;\n"
+#~ "\tPreDepends 50;\n"
+#~ "};"
+#~ msgstr ""
+#~ "OrderList::Score {\n"
+#~ "\tDelete 500;\n"
+#~ "\tEssential 200;\n"
+#~ "\tImmediate 10;\n"
+#~ "\tPreDepends 50;\n"
+#~ "};"
+
+#~ msgid ""
+#~ "Essential packages (and their dependencies) should be configured "
+#~ "immediately after unpacking. It is a good idea to do this quite early in "
+#~ "the upgrade process as these configure calls also currently require "
+#~ "<literal>DPkg::TriggersPending</literal> which will run quite a few "
+#~ "triggers (which may not be needed). Essentials get per default a high "
+#~ "score but the immediate flag is relatively low (a package which has a Pre-"
+#~ "Depends is rated higher). These option and the others in the same group "
+#~ "can be used to change the scoring. The following example shows the "
+#~ "settings with their default values. <placeholder type=\"literallayout\" "
+#~ "id=\"0\"/>"
+#~ msgstr ""
+#~ "Les paquets essentiels (et leurs dépendances) devraient être configurés "
+#~ "après avoir été décompressés. Il est conseillé que cette opération ait "
+#~ "lieu le plus tôt possible dans le processus de mise à jour car ces "
+#~ "opérations de configuration nécessitent également <literal>DPkg::"
+#~ "TriggersPending</literal>, ce qui peut conduire à l'exécution de certains "
+#~ "actions différées qui ne sont pas nécessairement utiles. Les paquets "
+#~ "essentiels obtiennent par défaut un score élevé mais le marqueur "
+#~ "« immédiat » implique un score assez bas (par exemple un paquet qui "
+#~ "comporte des prédépendances obtient un score plus élevé). Cette option et "
+#~ "les options du même groupe permettent de modifier la façon d'attribuer un "
+#~ "score. L'exemple ci-dessous indique ces réglages avec leurs valeurs par "
+#~ "défaut. <placeholder type=\"literallayout\" id=\"0\"/>"
+
+#~ msgid "List fingerprints of trusted keys."
+#~ msgstr "Afficher les empreintes des clés fiables."
+
+#~ msgid "<filename>/etc/apt/trustdb.gpg</filename>"
+#~ msgstr "<filename>/etc/apt/trustdb.gpg</filename>"
+
+#~ msgid "Local trust database of archive keys."
+#~ msgstr "Base de données locale de fiabilité des clés de l'archive."
+
+#~ msgid "&keyring-filename;"
+#~ msgstr "&keyring-filename;"
+
+#~ msgid "Keyring of &keyring-distro; archive trusted keys."
+#~ msgstr "Trousseau des clés fiables de l'archive &keyring-distro;."
+
+#~ msgid "&keyring-removed-filename;"
+#~ msgstr "&keyring-removed-filename;"
+
+#~ msgid "Keyring of &keyring-distro; archive removed trusted keys."
+#~ msgstr ""
+#~ "Trousseau des clés fiables supprimées de l'archive &keyring-distro;."
+
#, fuzzy
#~| msgid "&apt-cache; &apt-conf;"
#~ msgid "&apt-get;, &apt-conf;"
projects / apt.git / blobdiff