-<!doctype debiandoc system>
<!-- -*- mode: sgml; mode: fold -*- -->
+<!doctype debiandoc PUBLIC "-//DebianDoc//DTD DebianDoc//EN">
<book>
<title>APT Method Interface </title>
<author>Jason Gunthorpe <email>jgg@debian.org</email></author>
-<version>$Id: method.sgml,v 1.5 1998/12/04 21:16:54 jgg Exp $</version>
+<version>$Id: method.sgml,v 1.10 2003/02/12 15:05:46 doogie Exp $</version>
<abstract>
This document describes the interface that APT uses to the archive
option) any later version.
<p>
-For more details, on Debian GNU/Linux systems, see the file
-/usr/doc/copyright/GPL for the full license.
+For more details, on Debian systems, see the file
+/usr/share/common-licenses/GPL for the full license.
</copyright>
<toc sect>
<p>
The APT method interface allows APT to acquire archive files (.deb), index
-files (Packages, Revision, Mirrors) and source files (.tar.gz, .diff). It
+files (Packages, Release, Mirrors) and source files (.tar.gz, .diff). It
is a general, extensible system designed to satisfy all of these
requirements:
<tag>acquire<item>
The act of bring a URI into the local pathname space. This may simply
-be verifiying the existence of the URI or actually downloading it from
+be verifying the existence of the URI or actually downloading it from
a remote site.
</taglist>
<p>
All methods operate as a sub process of a main controlling parent. 3 FD's
are opened for use by the method allowing two way communication and
-emergency error reporting. The FD's corrispond to the well known unix FD's,
+emergency error reporting. The FD's correspond to the well known unix FD's,
stdin, stdout and stderr.
<p>
-Throught operation of the method communication is done via http
+Through operation of the method communication is done via http
style plain text. Specifically RFC-822 (like the Package file) fields
are used to describe items and a numeric-like header is used to indicate
what is happening. Each of these distinct communication messages should be
<p>
The first line of each message is called the message header. The first
3 digits (called the Status Code) have the usual meaning found in the
-http protocol. 1xx is informational, 2xx is successfull and 4xx is failure.
+http protocol. 1xx is informational, 2xx is successful and 4xx is failure.
The 6xx series is used to specify things sent to the method. After the
status code is an informational string provided for visual debugging.
Only the 6xx series of status codes is sent TO the method. Furthermore
the method may not emit status codes in the 6xx range. The Codes 402
and 403 require that the method continue reading all other 6xx codes
-until the proper 602/603 code is recieved. This means the method must be
+until the proper 602/603 code is received. This means the method must be
capable of handling an unlimited number of 600 messages.
<p>
<em>100 Capabilities</> and APT sending out a <em>601 Configuration</>.
After that APT begins sending <em>600 URI Acquire</> and the method
sends out <em>200 URI Start</>, <em>201 URI Done</> or
-<em>400 URI Failure</>. No syncronization is performed, it is expected
+<em>400 URI Failure</>. No synchronization is performed, it is expected
that APT will send <em>600 URI Acquire</> messages at -any- time and
that the method should queue the messages. This allows methods like http
to pipeline requests to the remote server. It should be noted however
-that APT will buffer messages so it is not neccessary for the method
-to be constantly ready to recieve them.
+that APT will buffer messages so it is not necessary for the method
+to be constantly ready to receive them.
</sect>
<!-- }}} -->
<!-- Header Fields {{{ -->
<tag>Single-Instance<item>Requires that only one instance of the method be run
This is a yes/no value.
<tag>Pipeline<item>The method is capable of pipelining.
-<tag>Local<item>The method only returns Filename: feilds.
+<tag>Local<item>The method only returns Filename: fields.
<tag>Send-Config<item>Send configuration to the method.
+<tag>Needs-Cleanup<item>The process is kept around while the files it returned
+are being used. This is primarily intended for CD-ROM and File URIs that need
+to unmount filesystems.
<tag>Version<item>Version string for the method
</taglist>
<taglist>
<tag>100 Capabilities<item>
Displays the capabilities of the method. Methods should set the
-pipeline bit if their underlying protocol supports pipeling. The
+pipeline bit if their underlying protocol supports pipelining. The
only known method that does support pipelining is http.
-Fields: Version, Single-Instance, Pre-Scan, Pipeline, Send-Config
+Fields: Version, Single-Instance, Pre-Scan, Pipeline, Send-Config,
+Needs-Cleanup
<tag>101 Log<item>
A log message may be printed to the screen if debugging is enabled. This
<tag>102 Status<item>
Message gives a progress indication for the method. It can be used to show
-pre-transfer status for internet type methods.
+pre-transfer status for Internet type methods.
Fields: Message
<tag>200 URI Start<item>
-Indicates the URI is starting to be transfered. The URI is specified
+Indicates the URI is starting to be transferred. The URI is specified
along with stats about the file itself.
Fields: URI, Size, Last-Modified, Resume-Point
<tag>201 URI Done<item>
-Indicates that a URI has completed being transfered. It is possible
+Indicates that a URI has completed being transferred. It is possible
to specify a <em>201 URI Done</> without a <em>URI Start</> which would
-mean no data was transfered but the file is now available. A Filename
+mean no data was transferred but the file is now available. A Filename
field is specified when the URI is directly available in the local
pathname space. APT will either directly use that file or copy it into
-another location. It is possible to return Alt-* feilds to indicate that
+another location. It is possible to return Alt-* fields to indicate that
another possibility for the URI has been found in the local pathname space.
This is done if a decompressed version of a .gz file is found.
Fields: URI, Size, Last-Modified, Filename, MD5-Hash
<tag>400 URI Failure<item>
Indicates a fatal URI failure. The URI is not retrievable from this source.
-As with <em>201 URI Done</> <em>200 URI Start</> is not required to preceed
+As with <em>201 URI Done</> <em>200 URI Start</> is not required to precede
this message
Fields: URI, Message
<tag>401 General Failure<item>
-Indicates that some unspecific failure has occured and the method is unable
+Indicates that some unspecific failure has occurred and the method is unable
to continue. The method should terminate after sending this message. It
is intended to check for invalid configuration options or other severe
conditions.
</sect>
<!-- }}} -->
-<!-- Examples {{{ -->
+<!-- Method Notes {{{ -->
<!-- ===================================================================== -->
-<sect>Examples
+<sect>Notes
+
+<p>
+The methods supplied by the stock apt are:
+<enumlist>
+<item>cdrom - For Multi-Disc CD-ROMs
+<item>copy - (internal) For copying files around the filesystem
+<item>file - For local files
+<item>gzip - (internal) For decompression
+<item>http - For HTTP servers
+</enumlist>
+
+<p>
+The two internal methods, copy and gzip, are used by the acquire code to
+parallize and simplify the automatic decompression of package files as well
+as copying package files around the file system. Both methods can be seen to
+act the same except that one decompresses on the fly. APT uses them by
+generating a copy URI that is formed identically to a file URI. The destination
+file is send as normal. The method then takes the file specified by the
+URI and writes it to the destination file. A typical set of operations may
+be:
+<example>
+http://foo.com/Packages.gz -> /bar/Packages.gz
+gzip:/bar/Packages.gz -> /bar/Packages.decomp
+rename Packages.decomp to /final/Packages
+</example>
+
+<p>
+The http method implements a fully featured HTTP/1.1 client that supports
+deep pipelining and reget. It works best when coupled with an apache 1.3
+server. The file method simply generates failures or success responses with
+the filename field set to the proper location. The cdrom method acts the same
+except that it checks that the mount point has a valid cdrom in it. It does
+this by (effectively) computing a md5 hash of 'ls -l' on the mountpoint.
</sect>
<!-- }}} -->
projects / apt.git / blobdiff