compression formats, with partial downloads and patches is an involved
process which is hard to implement correctly and securely.
-APT frontends share the code and binaries to make this happen in libapt
+APT front-ends share the code and binaries to make this happen in libapt
with the Acquire system, supported by helpers shipped in the apt package
itself and additional transports in individual packages like
apt-transport-https.
For its own operation libapt needs or can make use of Packages, Sources
and Translation-* files, which it will acquire by default, but
-a repository might contain more data files (e.g. Contents) a frontend
-might want to use and would therefore need to be downloaded as well
-(e.g. apt-file).
+a repository might contain more data files (e.g. Contents) a front-end
+(e.g. apt-file) might want to use and would therefore need to be
+downloaded as well.
-This file describes the configuration scheme such a frontend can use to
+This file describes the configuration scheme such a front-end can use to
instruct the Acquire system to download those additional files.
-Note that you can't download files from other sources. It must be files
-in the same repository and below the Release file. The Release file must
-also contain hashes for the file itself as well as for the compressed
-file if wanted, otherwise a download isn't even tried!
-
-
# The Configuration Stanza
The Acquire system uses the same configuration settings to implement the
instructing the Acquire system to download the Packages files would look
like this (see also apt.conf(5) manpage for configuration file syntax):
- APT::Acquire::Targets::deb::Packages {
- URI "$(COMPONENT)/binary-$(ARCHITECTURE)/Packages";
+ Acquire::IndexTargets::deb::Packages {
+ MetaKey "$(COMPONENT)/binary-$(ARCHITECTURE)/Packages";
ShortDescription "Packages";
- Description "$(SITE) $(RELEASE)/$(COMPONENT) $(ARCHITECTURE) Packages";
+ Description "$(RELEASE)/$(COMPONENT) $(ARCHITECTURE) Packages";
- flatURI "Packages";
- flatDescription "$(SITE) $(RELEASE) Packages";
+ flatMetaKey "Packages";
+ flatDescription "$(RELEASE) Packages";
- Optional "false";
+ Optional "no";
};
All files which should be downloaded (nicknamed 'Targets') are mentioned
-below the APT::Acquire::Targets scope. 'deb' is here the type of the
+below the Acquire::IndexTargets scope. 'deb' is here the type of the
sources.list entry the file should be acquired for. The only other
supported value is hence 'deb-src'. Beware: You can't specify multiple
-types here and you can't download the same URI for multiple types!
+types here and you can't download the same (evaluated) MetaKey from
+multiple types!
After the type you can pick any valid and unique string which preferable
refers to the file it downloads (In the example we picked 'Packages').
-This string is never shown or used.
+This string is used as identifier for the target class and accessible as
+'Created-By' e.g. in the "apt-get indextargets" output as detailed
+below. It is also used to allow user to enable/disable targets per
+sources.list entry.
All targets have three main properties you can define:
-* URI: The identifier of the file to be downloaded as used in the
+* MetaKey: The identifier of the file to be downloaded as used in the
Release file. It is also the relative location of the file from the
Release file. You can neither download from a different server
- entirely (absolute URI) nor should you try to access directories above
- the Release file (e.g. "../../").
+ entirely (absolute URI) nor access directories above the Release file
+ (e.g. "../../").
* ShortDescription: Very short string intended to be displayed to the
user e.g. while reporting progress. apt will e.g. use this string in
the last line to indicate progress of e.g. the download of a specific
of which file is acquired exactly. Mainly used for progress reporting
and error messages. apt will e.g. use this string in the Get/Hit/Err
progress lines.
+ An identifier of the site accessed as seen in the sources.list (e.g.
+ "http://example.org/debian" or "file:/path/to/a/repository") is
+ automatically prefixed for this property.
+
Additional optional properties:
-* flat{URI,Description}: APT supports two types of repositories:
+* DefaultEnabled: The default value is 'yes' which means that apt will
+ try to acquire this target from all sources. If set to 'no' the user
+ has to explicitly enable this target in the sources.list file with the
+ Targets option(s) – or override this value in a config file.
+* Optional: The default value is 'yes' and should be kept at this value.
+ If enabled the acquire system will skip the download if the file isn't
+ mentioned in the Release file. Otherwise this is treated as a hard
+ error and the update process fails. Note that failures while
+ downloading (e.g. 404 or hash verification errors) are failures,
+ regardless of this setting.
+* KeepCompressed: The default is the value of Acquire::GzipIndexes,
+ which defaults to false. If true, the acquire system will keep the
+ file compressed on disk rather than extract it. If your front-end can't
+ deal with compressed files transparently you have to explicitly set
+ this option to false to avoid problems with users setting the option
+ globally. On the other hand, if you set it to true or don't set it you
+ have to ensure your front-end can deal with all compressed fileformats
+ supported by apt (libapt users can e.g. use FileFd, others can use
+ the cat-file command of /usr/lib/apt/apt-helper).
+* flat{MetaKey,Description}: APT supports two types of repositories:
dists-style repositories which are the default and by far the most
common which are named after the fact that the files are in an
- elaborated directory structure. In contrast a flat-style repositories
+ elaborated directory structure. In contrast a flat-style repository
lumps all files together in one directory. Support for these flat
repositories exists mainly for legacy purposes only. It is therefore
recommend to not set these values.
-* Optional: The default value is 'true' and should be kept at this
- value. If enabled the acquire system will skip the download if the
- file isn't mentioned in the Release file. Otherwise this is treated as
- a hard error and the update process fails.
-Note that the acquire system will automatically choose to download
-a compressed file if it is available and uncompress it for you, just as
-it will also use pdiff patching if provided by the repository and
-enabled by the user. You only have to ensure that the Release file
-contains the information about the compressed files/pdiffs to make this
-happen. NO properties have to be set to enable this.
+The acquire system will automatically choose to download a compressed
+file if it is available and uncompress it for you, just as it will also
+use PDiff patching if provided by the repository and enabled by the
+user. You only have to ensure that the Release file contains the
+information about the compressed files/PDiffs to make this happen.
+*NO* properties have to be set to enable this!
+
+
+More properties exist, but these should *NOT* be set by front-ends
+requesting files. They exist for internal and end-user usage only.
+Some of these are – which are documented here only to ensure that they
+aren't accidentally used by front-ends:
+* PDiffs: controls if apt will try to use PDiffs for this target.
+ Defaults to the value of Acquire::PDiffs which is true by default.
+ Can be overridden per-source by the sources.list option of the same
+ name. See the documentation for both of these for details.
+* By-Hash: controls if apt will try to use an URI constructed from
+ a hashsum of the file to download. See the documentation for config
+ option Acquire::By-Hash and sources.list option By-Hash for details.
+* CompressionTypes: The default value is a space separated list of
+ compression types supported by apt (see Acquire::CompressionTypes).
+ You can set this option to prevent apt from downloading a compression
+ type a front-end can't open transparently. This should always be
+ a temporary workaround through and a bug should be reported against
+ the front-end in question.
+* KeepCompressedAs: The default value is a space separated list of
+ compression types supported by apt (see previous option) which is
+ sorted by the cost-value of the compression in ascending order,
+ except that cost=0 "compressions" (like uncompressed) are listed last.
+
# More examples
The stanzas for Translation-* files as well as for Sources files would
look like this:
-APT::Acquire::Targets {
+Acquire::IndexTargets {
deb::Translations {
- URI "$(COMPONENT)/i18n/Translation-$(LANGUAGE)";
+ MetaKey "$(COMPONENT)/i18n/Translation-$(LANGUAGE)";
ShortDescription "Translation-$(LANGUAGE)";
- Description "$(SITE) $(RELEASE)/$(COMPONENT) Translation-$(LANGUAGE)";
+ Description "$(RELEASE)/$(COMPONENT) Translation-$(LANGUAGE)";
- flatURI "$(LANGUAGE)";
- flatDescription "$(SITE) $(RELEASE) Translation-$(LANGUAGE)";
+ flatMetaKey "$(LANGUAGE)";
+ flatDescription "$(RELEASE) Translation-$(LANGUAGE)";
};
deb-src::Sources {
- URI "$(COMPONENT)/source/Sources";
+ MetaKey "$(COMPONENT)/source/Sources";
ShortDescription "Sources";
- Description "$(SITE) $(RELEASE)/$(COMPONENT) Sources";
+ Description "$(RELEASE)/$(COMPONENT) Sources";
- flatURI "Sources";
- flatDescription "$(SITE) $(RELEASE) Sources";
+ flatMetaKey "Sources";
+ flatDescription "$(RELEASE) Sources";
- Optional "false";
+ Optional "no";
};
};
As seen in the examples, properties can contain placeholders filled in
by the acquire system. The following variables are known; note that
unknown variables have no default value nor are they touched: They are
-printed literally.
+printed as-is.
-* $(SITE): An identifier of the site we access, e.g.
- "http://example.org/".
* $(RELEASE): This is usually an archive- or codename, e.g. "stable" or
- "stretch". Note that flat-style repositories do not have a archive-
+ "stretch". Note that flat-style repositories do not have an archive-
or codename per-se, so the value might very well be just "/" or so.
* $(COMPONENT): as given in the sources.list, e.g. "main", "non-free" or
"universe". Note that flat-style repositories again do not really
have a meaningful value here.
* $(LANGUAGE): Values are all entries (expect "none") of configuration
option Acquire::Languages, e.g. "en", "de" or "de_AT".
-
-These values are defined both for 'deb' as well as 'deb-src' targets.
-'deb' targets additional have the variable:
-
* $(ARCHITECTURE): Values are all entries of configuration option
APT::Architectures (potentially modified by sources.list options),
- e.g. "amd64", "i386" or "armel".
+ e.g. "amd64", "i386" or "armel" for the 'deb' type. In type 'deb-src'
+ this variable has the value "source".
+* $(NATIVE_ARCHITECTURE): The architecture apt treats as the native
+ architecture for this system configured as APT::Architecture
+ defaulting to the architecture apt itself was built for.
+
+Note that while more variables might exist in the implementation, these
+are to be considered undefined and their usage strongly discouraged. If
+you have a need for other variables contact us.
+
+# Accessing files
+
+Do NOT hardcode specific file locations, names or compression types in
+your application! You will notice that the configuration options give
+you no choice over where the downloaded files will be stored. This is by
+design so multiple applications can download and use the same file
+rather than each and every one of them potentially downloads and uses
+its own copy somewhere on disk.
+
+"apt-get indextargets" can be used to get the location as well as other
+information about all files downloaded (aka: you will see Packages,
+Sources and Translation-* files here as well). Provide a line of the
+default output format as parameter to filter out all entries which do
+not have such a line. With --format, you can further more define your
+own output style. The variables are what you see in the output, just all
+uppercase and wrapped in $(), as in the configuration file.
+
+To get all the filenames of all Translation-en files you can e.g. call:
+ apt-get indextargets --format '$(FILENAME)' "Created-By: Translations" "Language: en"
+
+The line-based filtering and the formating is rather crude and feature-
+less by design: The default format is Debians standard format deb822 (in
+particular: Field names are case-insensitive and the order of fields in
+the stanza is undefined), so instead of apt reimplementing powerful
+filters and formating for this command, it is recommend to use piping
+and dedicated tools like 'grep-dctrl' if you need more than the basics
+provided.
+
+Accessing this information via libapt is done by reading the
+sources.lists (pkgSourceList), iterating over the metaIndex objects this
+creates and calling GetIndexTargets() on them. See the source code of
+"apt-get indextargets" for a complete example.
+
+Note that by default targets are not listed if they weren't downloaded.
+If you want to see all targets, you can use the --no-release-info, which
+also removes the Codename, Suite, Version, Origin, Label and Trusted
+fields from the output as these also display data which needs to be
+downloaded first and could hence be inaccurate [on the pro-side: This
+mode is faster as it doesn't require a valid binary cache to operate].
+The most notable difference perhaps is in the Filename field through: By
+default it indicates an existing file, potentially compressed (Hint:
+libapt users can use FileFd to open compressed files transparently). In
+the --no-release-info mode the indicated file doesn't need to exist and
+it will always refer to an uncompressed file, even if the index would be
+(or is) stored compressed.
+
+Remarks on fields only available in (default) --release-info mode:
+* Trusted: Denotes with a 'yes' or 'no' if the data in this file is
+ authenticated by a trust chain rooted in a trusted gpg key. You should
+ be careful with untrusted data and warn the user if you use it.
+* Codename, Suite, Version, Origin and Label are fields from the Release
+ file, are only present if they are present in the Release file and
+ contain the same data.
+
+Remarks on other available fields:
+* MetaKey, ShortDesc, Description, Site, Release: as defined
+ by the configuration and described further above.
+* Created-By: configuration entity responsible for this target
+* Target-Of: type of the sources.list entry
+* URI, Repo-URI: avoid using. Contains potentially username/password.
+ Prefer 'Site', especially for display.
+* Optional, DefaultEnabled, KeepCompressed: Decode the options of the
+ same name from the configuration.
+* Language, Architecture, Component: as defined further above, but with
+ the catch that they might be missing if they don't effect the target
+ (aka: They weren't used while evaluating the MetaKey template).
+
+Again, additional fields might be visible in certain implementations,
+but you should avoid using them and instead talk to us about a portable
+implementation.
+
+# Multiple applications requiring the same files
+
+It is highly encouraged that applications talk to each other and to us
+about which files they require. It is usually best to have a common
+package ship the configuration needed to get the files, but specific
+needs might require specific solutions. Again: talk to us.
+
+Bad things will happen if multiple front-ends request the same file(s)
+via different targets, which is another reason why coordination is very
+important!
+
+# Acquiring files not mentioned in the Release file
+
+You can't. This is by design as these files couldn't be verified to not
+be modified in transit, corrupted by the download process or simple if
+they are present at all on the server, which would require apt to probe
+for them. APT did this in the past for legacy reasons, we do not intend
+to go back to these dark times.
+
+This is also why you can't request files from a different server. It
+would have the additional problem that this server might not even be
+accessible (e.g. proxy settings) or that local sources (file:/, cdrom:/)
+start requesting online files…
+
+In other words: We would be opening Pandora's box.
+
+# Acquiring files to a specific location on disk
+
+You can't by design to avoid multiple front-ends requesting the same file
+to be downloaded to multiple different places on (different) disks
+(among other reasons). See the next point for a solution if you really
+have to force a specific location by creating symlinks.
+
+# Post processing the acquired files
+
+You can't modify the files apt has downloaded as apt keeps state with
+e.g. the modification times of the files and advanced features like
+PDiffs break.
+
+You can however install an APT::Update::Post-Invoke{-Success,} hook
+script and use them to copy (modified) files to a different location.
+Use 'apt-get indextargets' (or similar) to get the filenames – do not
+look into /var/lib/apt/lists directly!
+
+Please avoid time consuming calculations in the scripts and instead just
+trigger a background task as there is little to no feedback for the user
+while hook scripts run.
projects / apt.git / blobdiff