X-Git-Url: https://git.saurik.com/apple/xnu.git/blobdiff_plain/e5568f75972dfc723778653c11cb6b4dc825716a..5d5c5d0d5b79ade9a973d55186ffda2638ba2b6e:/osfmk/ppc/hw_exception.s diff --git a/osfmk/ppc/hw_exception.s b/osfmk/ppc/hw_exception.s index 4904b63ca..d9e660b31 100644 --- a/osfmk/ppc/hw_exception.s +++ b/osfmk/ppc/hw_exception.s @@ -1,23 +1,31 @@ /* - * Copyright (c) 2000 Apple Computer, Inc. All rights reserved. + * Copyright (c) 2000-2005 Apple Computer, Inc. All rights reserved. * - * @APPLE_LICENSE_HEADER_START@ + * @APPLE_LICENSE_OSREFERENCE_HEADER_START@ * - * The contents of this file constitute Original Code as defined in and - * are subject to the Apple Public Source License Version 1.1 (the - * "License"). You may not use this file except in compliance with the - * License. Please obtain a copy of the License at - * http://www.apple.com/publicsource and read it before using this file. - * - * This Original Code and all software distributed under the License are - * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER - * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, - * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Please see the - * License for the specific language governing rights and limitations - * under the License. - * - * @APPLE_LICENSE_HEADER_END@ + * This file contains Original Code and/or Modifications of Original Code + * as defined in and that are subject to the Apple Public Source License + * Version 2.0 (the 'License'). You may not use this file except in + * compliance with the License. The rights granted to you under the + * License may not be used to create, or enable the creation or + * redistribution of, unlawful or unlicensed copies of an Apple operating + * system, or to circumvent, violate, or enable the circumvention or + * violation of, any terms of an Apple operating system software license + * agreement. + * + * Please obtain a copy of the License at + * http://www.opensource.apple.com/apsl/ and read it before using this + * file. + * + * The Original Code and all software distributed under the License are + * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER + * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, + * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. + * Please see the License for the specific language governing rights and + * limitations under the License. + * + * @APPLE_LICENSE_OSREFERENCE_HEADER_END@ */ /* * @OSF_COPYRIGHT@ @@ -46,11 +54,11 @@ #include #include #include -#include #define VERIFYSAVE 0 #define FPVECDBG 0 +#define FPFLOOD 0 #define INSTRUMENT 0 /* @@ -92,13 +100,13 @@ .globl EXT(thandler) LEXT(thandler) ; Trap handler - mfsprg r25,0 ; Get the per_proc + mfsprg r13,1 ; Get the current activation + lwz r25,ACT_PER_PROC(r13) ; Get the per_proc block lwz r1,PP_ISTACKPTR(r25) ; Get interrupt stack pointer - mfsprg r13,1 ; Get the current thread cmpwi cr0,r1,0 ; Are we on interrupt stack? - lwz r6,ACT_THREAD(r13) ; Get the shuttle + mr r6,r13 beq- cr0,EXT(ihandler) ; If on interrupt stack, treat this as interrupt... lwz r26,ACT_MACT_SPF(r13) ; Get special flags lwz r8,ACT_MACT_PCB(r13) ; Get the last savearea used @@ -122,7 +130,7 @@ LEXT(thandler) ; Trap handler subi r1,r26,FM_REDZONE ; Make a red zone on interrupt time kernel stack .L_kstackfree: - lwz r7,savesrr1+4(r4) ; Pick up the entry MSR + lwz r31,savesrr1+4(r4) ; Pick up the entry MSR sub r9,r1,r9 ; Get displacment into the kernel stack li r0,0 ; Make this 0 rlwinm. r0,r9,0,28,31 ; Verify that we have a 16-byte aligned stack (and get a 0) @@ -134,7 +142,7 @@ LEXT(thandler) ; Trap handler .L_state_on_kstack: lwz r9,savevrsave(r4) ; Get the VRSAVE register bne-- kernelStackUnaligned ; Stack is unaligned... - rlwinm. r6,r7,0,MSR_VEC_BIT,MSR_VEC_BIT ; Was vector on? + rlwinm. r6,r31,0,MSR_VEC_BIT,MSR_VEC_BIT ; Was vector on? subi r1,r1,FM_SIZE ; Push a header onto the current stack bgt-- cr2,kernelStackBad ; Kernel stack is bogus... @@ -154,16 +162,20 @@ tvecoff: stw r26,FM_BACKPTR(r1) ; Link back to the previous frame stwu r1, -FM_SIZE(r1) ; and make new frame #endif /* DEBUG */ + mr r30,r4 + lwz r3,SAVtime+4(r4) + addi r4,r13,SYSTEM_TIMER + bl EXT(timer_event) /* call trap handler proper, with - * ARG0 = type (not yet, holds pcb ptr) - * ARG1 = saved_state ptr (already there) - * ARG2 = dsisr (already there) - * ARG3 = dar (already there) + * ARG0 = type + * ARG1 = saved_state ptr + * ARG2 = dsisr + * ARG3 = dar */ - - lwz r3,saveexception(r4) ; Get the exception code + mr r4,r30 + lwz r3,saveexception(r30) ; Get the exception code lwz r0,ACT_MACT_SPF(r13) ; Get the special flags addi r5,r3,-T_DATA_ACCESS ; Adjust to start of range @@ -173,7 +185,7 @@ tvecoff: stw r26,FM_BACKPTR(r1) ; Link back to the previous frame lwz r5,savedsisr(r4) ; Get the saved DSISR crnor cr7_eq,cr0_eq,cr2_gt ; We should intercept if in VM and is a true trap (cr7_eq == 1 if yes) - rlwinm. r0,r7,0,MSR_PR_BIT,MSR_PR_BIT ; Are we trapping from supervisor state? (cr0_eq == 1 if yes) + rlwinm. r0,r31,0,MSR_PR_BIT,MSR_PR_BIT ; Are we trapping from supervisor state? (cr0_eq == 1 if yes) cmpi cr2,r3,T_PREEMPT ; Is this a preemption? @@ -195,6 +207,10 @@ tvecoff: stw r26,FM_BACKPTR(r1) ; Link back to the previous frame .L_call_trap: +#if FPFLOOD + stfd f31,emfp31(r25) ; (TEST/DEBUG) +#endif + bl EXT(trap) lis r10,hi16(MASK(MSR_VEC)) ; Get the vector enable @@ -202,7 +218,8 @@ tvecoff: stw r26,FM_BACKPTR(r1) ; Link back to the previous frame ori r10,r10,lo16(MASK(MSR_FP)|MASK(MSR_EE)) ; Add in FP and EE andc r7,r7,r10 ; Turn off VEC, FP, and EE mtmsr r7 ; Disable for interrupts - mfsprg r10,0 ; Restore the per_proc info + mfsprg r8,1 ; Get the current activation + lwz r10,ACT_PER_PROC(r8) ; Get the per_proc block /* * This is also the point where new threads come when they are created. * The new thread is setup to look like a thread that took an @@ -216,7 +233,7 @@ thread_return: mfsprg r8,1 ; Get the current thread rlwinm r11,r11,0,15,13 ; Clear the syscall flag rlwinm. r0,r0,0,MSR_PR_BIT,MSR_PR_BIT ; Are we going to the user? - lwz r1,ACT_THREAD(r8) ; Get the shuttle + mr r1,r8 stw r11,SAVflags(r3) ; Save back the flags (with reset stack cleared) lwz r5,THREAD_KERNEL_STACK(r1) ; Get the base pointer to the stack @@ -289,16 +306,16 @@ kernelStackUnaligned: LEXT(shandler) ; System call handler lwz r7,savesrr1+4(r4) ; Get the SRR1 value - mfsprg r25,0 ; Get the per proc area + mfsprg r13,1 ; Get the current activation + lwz r25,ACT_PER_PROC(r13) ; Get the per_proc block lwz r0,saver0+4(r4) ; Get the original syscall number lwz r17,PP_ISTACKPTR(r25) ; Get interrupt stack pointer - mfsprg r13,1 ; Get the current thread rlwinm r15,r0,0,0,19 ; Clear the bottom of call number for fast check mr. r17,r17 ; Are we on interrupt stack? lwz r9,savevrsave(r4) ; Get the VRsave register beq-- EXT(ihandler) ; On interrupt stack, not allowed... rlwinm. r6,r7,0,MSR_VEC_BIT,MSR_VEC_BIT ; Was vector on? - lwz r16,ACT_THREAD(r13) ; Get the shuttle + mr r16,r13 beq++ svecoff ; Vector off, do not save vrsave... stw r9,liveVRS(r25) ; Set the live value @@ -348,6 +365,10 @@ noassist: cmplwi r15,0x7000 ; Do we have a fast path trap? mr r30,r4 ; Save pointer to the new context savearea stw r0,ACT_MACT_KSP(r13) ; Mark stack as busy with 0 val stw r15,FM_BACKPTR(r1) ; Link stack frame backwards + + lwz r3,SAVtime+4(r30) + addi r4,r13,SYSTEM_TIMER + bl EXT(timer_event) #if DEBUG /* If debugging, we need two frames, the first being a dummy @@ -359,10 +380,12 @@ noassist: cmplwi r15,0x7000 ; Do we have a fast path trap? stwu r1, -FM_SIZE(r1) ; and make new frame #endif /* DEBUG */ + mr r4,r30 + lwz r15,SAVflags(r30) ; Get the savearea flags lwz r0,saver0+4(r30) ; Get R0 back mfmsr r11 ; Get the MSR - stwu r1,-(FM_SIZE+ARG_SIZE)(r1) ; Make a stack frame + stwu r1,-(FM_SIZE+ARG_SIZE+MUNGE_ARGS_SIZE)(r1) ; Make a stack frame ori r11,r11,lo16(MASK(MSR_EE)) ; Turn on interruption enabled bit rlwinm r10,r0,0,0,19 ; Keep only the top part oris r15,r15,SAVsyscall >> 16 ; Mark that it this is a syscall @@ -386,6 +409,11 @@ noassist: cmplwi r15,0x7000 ; Do we have a fast path trap? mr r4,r13 ; current activation addi r7,r7,1 ; Bump it stw r7,TASK_SYSCALLS_UNIX(r8) ; Save it + +#if FPFLOOD + stfd f31,emfp31(r25) ; (TEST/DEBUG) +#endif + bl EXT(unix_syscall) ; Check out unix... .L_call_server_syscall_exception: @@ -414,7 +442,7 @@ noassist: cmplwi r15,0x7000 ; Do we have a fast path trap? ; and the savearea/pcb as the first parameter. ; It is up to the callee to enable interruptions if ; they should be. We are in a state here where -; both interrupts and preemption is ok, but because we could +; both interrupts and preemption are ok, but because we could ; be calling diagnostic code we will not enable. ; ; Also, the callee is responsible for finding any parameters @@ -470,7 +498,8 @@ LEXT(ppcscret) mr. r3,r3 ; See what we should do mr r31,r16 ; Restore the current thread pointer bgt+ .L_thread_syscall_ret_check_ast ; Take normal AST checking return.... - mfsprg r10,0 ; Get the per_proc + mfsprg r10,1 ; Get the current activation + lwz r10,ACT_PER_PROC(r10) ; Get the per_proc block blt+ .L_thread_syscall_return ; Return, but no ASTs.... lwz r0,saver0+4(r30) ; Restore the system call number b .L_call_server_syscall_exception ; Go to common exit... @@ -483,35 +512,36 @@ LEXT(ppcscret) */ ksystrace: - mr r4,r30 ; Pass in saved state + mr r4,r30 ; Pass in saved state bl EXT(syscall_trace) - cmplw r31,r29 ; Is this syscall in the table? - add r31,r27,r28 ; Point right to the syscall table entry + cmplw r31,r29 ; Is this syscall in the table? + add r31,r27,r28 ; Point right to the syscall table entry bge- .L_call_server_syscall_exception ; The syscall number is invalid - lwz r0,MACH_TRAP_FUNCTION(r31) ; Pick up the function address -; -; NOTE: We do not support more than 8 parameters for PPC. The only -; system call to use more than 8 is mach_msg_overwrite_trap and it -; uses 9. We pass a 0 in as number 9. -; - lwz r3,saver3+4(r30) ; Restore r3 - lwz r4,saver4+4(r30) ; Restore r4 - mtctr r0 ; Set the function call address - lwz r5,saver5+4(r30) ; Restore r5 - lwz r6,saver6+4(r30) ; Restore r6 - lwz r7,saver7+4(r30) ; Restore r7 - li r0,0 ; Clear this out - lwz r8,saver8+4(r30) ; Restore r8 - lwz r9,saver9+4(r30) ; Restore r9 - lwz r10,saver10+4(r30) ; Restore r10 - stw r0,FM_ARG0(r1) ; Clear that 9th parameter just in case some fool uses it - bctrl ; perform the actual syscall - - mr r4,r30 ; Pass in the savearea - bl EXT(syscall_trace_end) ; Trace the exit of the system call + lwz r0,savesrr1(r30) ; Get the saved srr1 + rlwinm. r0,r0,0,MSR_SF_BIT,MSR_SF_BIT ; Test for 64 bit caller + lwz r0,MACH_TRAP_ARG_MUNGE32(r31) ; Pick up the 32 bit munge function address + beq-- .L_ksystrace_munge + lwz r0,MACH_TRAP_ARG_MUNGE64(r31) ; Pick up the 64 bit munge function address + +.L_ksystrace_munge: + cmplwi r0,0 ; do we have a munger to call? + mtctr r0 ; Set the function call address + addi r3,r30,saver3 ; Pointer to args from save area + addi r4,r1,FM_ARG0+ARG_SIZE ; Pointer for munged args + beq-- .L_ksystrace_trapcall ; just make the trap call + bctrl ; Call the munge function + +.L_ksystrace_trapcall: + lwz r0,MACH_TRAP_FUNCTION(r31) ; Pick up the function address + mtctr r0 ; Set the function call address + addi r3,r1,FM_ARG0+ARG_SIZE ; Pointer to munged args + bctrl + + mr r4,r30 ; Pass in the savearea + bl EXT(syscall_trace_end) ; Trace the exit of the system call b .L_mach_return @@ -531,46 +561,55 @@ ksystrace: ; Call a function that can print out our syscall info ; Note that we don t care about any volatiles yet ; - lwz r10,ACT_TASK(r13) ; Get our task + lwz r10,ACT_TASK(r13) ; Get our task lwz r0,saver0+4(r30) - lis r8,hi16(EXT(kdebug_enable)) ; Get top of kdebug_enable + lis r8,hi16(EXT(kdebug_enable)) ; Get top of kdebug_enable lis r28,hi16(EXT(mach_trap_table)) ; Get address of table ori r8,r8,lo16(EXT(kdebug_enable)) ; Get bottom of kdebug_enable - lwz r8,0(r8) ; Get kdebug_enable + lwz r8,0(r8) ; Get kdebug_enable - lwz r7,TASK_SYSCALLS_MACH(r10) ; Get the current count - neg r31,r0 ; Make this positive - slwi r27,r31,MACH_TRAP_OFFSET_POW2 ; Convert index to offset + lwz r7,TASK_SYSCALLS_MACH(r10) ; Get the current count + neg r31,r0 ; Make this positive + mr r3,r31 ; save it + slwi r27,r3,4 ; multiply by 16 + slwi r3,r3,2 ; and the original by 4 ori r28,r28,lo16(EXT(mach_trap_table)) ; Get address of table - addi r7,r7,1 ; Bump TASK_SYSCALLS_MACH count - cmplwi r8,0 ; Is kdebug_enable non-zero - stw r7,TASK_SYSCALLS_MACH(r10) ; Save count - bne-- ksystrace ; yes, tracing enabled + add r27,r27,r3 ; for a total of 20x (5 words/entry) + addi r7,r7,1 ; Bump TASK_SYSCALLS_MACH count + cmplwi r8,0 ; Is kdebug_enable non-zero + stw r7,TASK_SYSCALLS_MACH(r10) ; Save count + bne-- ksystrace ; yes, tracing enabled - cmplwi r31,MACH_TRAP_TABLE_COUNT ; Is this syscall in the table? - add r31,r27,r28 ; Point right to the syscall table entry + cmplwi r31,MACH_TRAP_TABLE_COUNT ; Is this syscall in the table? + add r31,r27,r28 ; Point right to the syscall table entry bge-- .L_call_server_syscall_exception ; The syscall number is invalid - - lwz r0,MACH_TRAP_FUNCTION(r31) ; Pick up the function address -; -; NOTE: We do not support more than 8 parameters for PPC. The only -; system call to use more than 8 is mach_msg_overwrite_trap and it -; uses 9. We pass a 0 in as number 9. -; - lwz r3,saver3+4(r30) ; Restore r3 - lwz r4,saver4+4(r30) ; Restore r4 - lwz r5,saver5+4(r30) ; Restore r5 - mtctr r0 ; Set the function call address - lwz r6,saver6+4(r30) ; Restore r6 - lwz r7,saver7+4(r30) ; Restore r7 - lwz r8,saver8+4(r30) ; Restore r8 - li r0,0 ; Clear this out - lwz r9,saver9+4(r30) ; Restore r9 - lwz r10,saver10+4(r30) ; Restore r10 - stw r0,FM_ARG0(r1) ; Clear that 9th parameter just in case some fool uses it - bctrl ; perform the actual syscall + lwz r0,savesrr1(r30) ; Get the saved srr1 + rlwinm. r0,r0,0,MSR_SF_BIT,MSR_SF_BIT ; Test for 64 bit caller + lwz r0,MACH_TRAP_ARG_MUNGE32(r31) ; Pick up the 32 bit munge function address + beq-- .L_kernel_syscall_munge + lwz r0,MACH_TRAP_ARG_MUNGE64(r31) ; Pick up the 64 bit munge function address + +.L_kernel_syscall_munge: + cmplwi r0,0 ; test for null munger + mtctr r0 ; Set the function call address + addi r3,r30,saver3 ; Pointer to args from save area + addi r4,r1,FM_ARG0+ARG_SIZE ; Pointer for munged args + beq-- .L_kernel_syscall_trapcall ; null munger - skip to trap call + bctrl ; Call the munge function + +.L_kernel_syscall_trapcall: + lwz r0,MACH_TRAP_FUNCTION(r31) ; Pick up the function address + mtctr r0 ; Set the function call address + addi r3,r1,FM_ARG0+ARG_SIZE ; Pointer to munged args + +#if FPFLOOD + stfd f31,emfp31(r25) ; (TEST/DEBUG) +#endif + + bctrl + /* * Ok, return from C function, R3 = return value @@ -579,11 +618,13 @@ ksystrace: * saved state is still in R30 and the active thread is in R16 */ -.L_mach_return: - mr r31,r16 ; Move the current thread pointer - stw r3,saver3+4(r30) ; Stash the return code - cmpi cr0,r3,KERN_INVALID_ARGUMENT ; deal with invalid system calls - beq- cr0,.L_mach_invalid_ret ; otherwise fall through into the normal return path +.L_mach_return: + srawi r0,r3,31 ; properly extend the return code + cmpi cr0,r3,KERN_INVALID_ARGUMENT ; deal with invalid system calls + mr r31,r16 ; Move the current thread pointer + stw r0, saver3(r30) ; stash the high part of the return code + stw r3,saver3+4(r30) ; Stash the low part of the return code + beq-- cr0,.L_mach_invalid_ret ; otherwise fall through into the normal return path .L_mach_invalid_arg: @@ -606,12 +647,12 @@ ksystrace: andc r12,r12,r10 ; Turn off VEC, FP, and EE mtmsr r12 ; Turn interruptions off - mfsprg r10,0 ; Get the per_processor block + mfsprg r10,1 ; Get the current activation + lwz r10,ACT_PER_PROC(r10) ; Get the per_proc block /* Check to see if there's an outstanding AST */ - lwz r4,PP_NEED_AST(r10) ; Get the pointer to the ast requests - lwz r4,0(r4) ; Get the flags + lwz r4,PP_PENDING_AST(r10) cmpi cr0,r4, 0 ; Any pending asts? beq++ cr0,.L_syscall_no_ast ; Nope... @@ -634,8 +675,9 @@ ksystrace: scrnotkern: #endif /* DEBUG */ - li r3,AST_ALL ; Set ast flags + lis r3,hi16(AST_ALL) ; Set ast flags li r4,1 ; Set interrupt allowed + ori r3,r3,lo16(AST_ALL) bl EXT(ast_taken) ; Process the pending ast b .L_thread_syscall_ret_check_ast ; Go see if there was another... @@ -646,10 +688,13 @@ scrnotkern: * then we want to throw an exception... otherwise * we want to pass the error code back to the caller */ - lwz r0,saver0+4(r30) ; reload the original syscall number + lwz r0,saver0+4(r30) ; reload the original syscall number neg r28,r0 ; Make this positive - slwi r27,r28,MACH_TRAP_OFFSET_POW2 ; Convert index to offset + mr r4,r28 ; save a copy + slwi r27,r4,4 ; multiply by 16 + slwi r4,r4,2 ; and another 4 lis r28,hi16(EXT(mach_trap_table)) ; Get address of table + add r27,r27,r4 ; for a total of 20x (5 words/entry) ori r28,r28,lo16(EXT(mach_trap_table)) ; Get address of table add r28,r27,r28 ; Point right to the syscall table entry lwz r27,MACH_TRAP_FUNCTION(r28) ; Pick up the function address @@ -713,9 +758,9 @@ LEXT(thread_exception_return) ; Directly return to user mode frame, given that we're not going to return. */ - mfsprg r10,0 ; Get the per_processor block - lwz r4,PP_NEED_AST(r10) - lwz r4,0(r4) + mfsprg r10,1 ; Get the current activation + lwz r10,ACT_PER_PROC(r10) ; Get the per_proc block + lwz r4,PP_PENDING_AST(r10) cmpi cr0,r4, 0 beq+ cr0,.L_exc_ret_no_ast @@ -724,8 +769,9 @@ LEXT(thread_exception_return) ; Directly return to user mode * ast_taken will save all state and bring us back here */ - li r3,AST_ALL + lis r3,hi16(AST_ALL) li r4,1 + ori r3,r3,lo16(AST_ALL) bl EXT(ast_taken) b .L_thread_exc_ret_check_ast ; check for a second AST (rare) @@ -736,7 +782,7 @@ LEXT(thread_exception_return) ; Directly return to user mode .L_exc_ret_no_ast: mfsprg r30,1 ; Get the currrent activation - lwz r31,ACT_THREAD(r30) ; Get the current thread + mr r31,r30 lwz r30,ACT_MACT_PCB(r30) mr. r30,r30 ; Is there any context yet? @@ -818,11 +864,11 @@ LEXT(ihandler) ; Interrupt handler */ lwz r10,savesrr1+4(r4) ; Get SRR1 lwz r7,savevrsave(r4) ; Get the VRSAVE register - mfsprg r25,0 ; Get the per_proc block + mfsprg r13,1 ; Get the current activation + lwz r25,ACT_PER_PROC(r13) ; Get the per_proc block li r14,0 ; Zero this for now - rlwinm. r13,r10,0,MSR_VEC_BIT,MSR_VEC_BIT ; Was vector on? + rlwinm. r16,r10,0,MSR_VEC_BIT,MSR_VEC_BIT ; Was vector on? lwz r1,PP_ISTACKPTR(r25) ; Get the interrupt stack - mfsprg r13,1 ; Get the current thread li r16,0 ; Zero this for now beq+ ivecoff ; Vector off, do not save vrsave... @@ -832,7 +878,7 @@ ivecoff: li r0,0 ; Get a constant 0 rlwinm r5,r10,0,MSR_PR_BIT,MSR_PR_BIT ; Are we trapping from supervisor state? mr. r1,r1 ; Is it active? cmplwi cr2,r5,0 ; cr2_eq == 1 if yes - lwz r16,ACT_THREAD(r13) ; Get the shuttle + mr r16,r13 lwz r14,ACT_MACT_PCB(r13) ; Now point to the PCB lwz r9,saver1+4(r4) ; Pick up the rupt time stack stw r14,SAVprev+4(r4) ; Queue the new save area in the front @@ -908,9 +954,22 @@ ihbootnover: ; (TEST/DEBUG) stwu r1,-FM_SIZE(r1) ; Make another new frame for C routine #endif /* DEBUG */ - lwz r5,savedsisr(r4) ; Get the DSISR - lwz r6,savedar+4(r4) ; Get the DAR + mr r31,r3 + mr r30,r4 + + lwz r3,SAVtime+4(r4) + addi r4,r13,SYSTEM_TIMER + bl EXT(timer_event) + + mr r3,r31 + mr r4,r30 + lwz r5,savedsisr(r30) ; Get the DSISR + lwz r6,savedar+4(r30) ; Get the DAR +#if FPFLOOD + stfd f31,emfp31(r25) ; (TEST/DEBUG) +#endif + bl EXT(interrupt) @@ -927,14 +986,13 @@ LEXT(ihandler_ret) ; Marks our return point from debugger entry ori r10,r10,lo16(MASK(MSR_FP)|MASK(MSR_EE)) ; Add in FP and EE andc r0,r0,r10 ; Turn off VEC, FP, and EE mtmsr r0 ; Make sure interrupts are disabled - mfsprg r10,0 ; Get the per_proc block + mfsprg r8,1 ; Get the current activation + lwz r10,ACT_PER_PROC(r8) ; Get the per_proc block lwz r7,SAVflags(r3) ; Pick up the flags - mfsprg r8,1 ; Get the current thread - lwz r9,SAVprev+4(r3) ; Get previous save area + lwz r9,SAVprev+4(r3) ; Get previous save area cmplwi cr1,r8,0 ; Are we still initializing? lwz r12,savesrr1+4(r3) ; Get the MSR we will load on return - lwz r8,THREAD_TOP_ACT(r8) ; Pick up the active thread andis. r11,r7,hi16(SAVrststk) ; Is this the first on the stack? stw r9,ACT_MACT_PCB(r8) ; Point to previous context savearea mr r4,r3 ; Move the savearea pointer @@ -955,8 +1013,7 @@ LEXT(ihandler_ret) ; Marks our return point from debugger entry cmplwi r3, 0 ; Check for preemption bne .L_no_int_ast ; Do not preempt if level is not zero andi. r6,r12,MASK(MSR_PR) ; privilege mode - lwz r11,PP_NEED_AST(r10) ; Get the AST request address - lwz r11,0(r11) ; Get the request + lwz r11,PP_PENDING_AST(r10) ; Get the pending AST mask beq- .L_kernel_int_ast ; In kernel space, AST_URGENT check li r3,T_AST ; Assume the worst mr. r11,r11 ; Are there any pending? @@ -1045,15 +1102,16 @@ chkfac: lwz r29,savesrr1+4(r3) ; Get the current MSR eieio ; Make sure this gets out before owner clear -#if ppSize != 4096 -#error per_proc_info is not 4k in size +#if ppeSize != 16 +#error per_proc_entry is not 16bytes in size #endif - lis r23,hi16(EXT(per_proc_info)) ; Set base per_proc - slwi r22,r22,12 ; FInd offset to the owner per_proc - ori r23,r23,lo16(EXT(per_proc_info)) ; Set base per_proc - li r24,FPUowner ; Displacement to FPU owner - add r22,r23,r22 ; Point to the owner per_proc + lis r23,hi16(EXT(PerProcTable)) ; Set base PerProcTable + slwi r22,r22,4 ; Find offset to the owner per_proc_entry + ori r23,r23,lo16(EXT(PerProcTable)) ; Set base PerProcTable + li r24,FPUowner ; Displacement to float owner + add r22,r23,r22 ; Point to the owner per_proc_entry + lwz r22,ppe_vaddr(r22) ; Point to the owner per_proc fpuinvothr: lwarx r23,r24,r22 ; Get the owner @@ -1128,7 +1186,10 @@ fpuhasdfrd: lwz r24,FPUsave(r26) ; (TEST/DEBUG) Get the first savearea mr. r23,r23 ; (TEST/DEBUG) Should be level 0 beq++ fpulvl0 ; (TEST/DEBUG) Yes... - BREAKPOINT_TRAP ; (TEST/DEBUG) + + lis r0,hi16(Choke) ; (TEST/DEBUG) Choke code + ori r0,r0,lo16(Choke) ; (TEST/DEBUG) and the rest + sc ; (TEST/DEBUG) System ABEND fpulvl0: mr. r24,r24 ; (TEST/DEBUG) Any context? beq fpunusrstt ; (TEST/DEBUG) No... @@ -1136,11 +1197,17 @@ fpulvl0: mr. r24,r24 ; (TEST/DEBUG) Any context? lwz r21,SAVprev+4(r24) ; (TEST/DEBUG) Get previous pointer mr. r23,r23 ; (TEST/DEBUG) Is this our user context? beq++ fpulvl0b ; (TEST/DEBUG) Yes... - BREAKPOINT_TRAP ; (TEST/DEBUG) + + lis r0,hi16(Choke) ; (TEST/DEBUG) Choke code + ori r0,r0,lo16(Choke) ; (TEST/DEBUG) and the rest + sc ; (TEST/DEBUG) System ABEND fpulvl0b: mr. r21,r21 ; (TEST/DEBUG) Is there a forward chain? beq++ fpunusrstt ; (TEST/DEBUG) Nope... - BREAKPOINT_TRAP ; (TEST/DEBUG) + + lis r0,hi16(Choke) ; (TEST/DEBUG) Choke code + ori r0,r0,lo16(Choke) ; (TEST/DEBUG) and the rest + sc ; (TEST/DEBUG) System ABEND fpunusrstt: ; (TEST/DEBUG) #endif @@ -1160,6 +1227,7 @@ fpunusrstt: ; (TEST/DEBUG) beq++ fpuena ; Nope... lwz r25,SAVlevel(r24) ; Get the level of savearea lwz r0,SAVprev+4(r24) ; Get the previous + cmplw r30,r25 ; Is savearea for the level we are launching? bne++ fpuena ; No, just go enable... @@ -1204,11 +1272,12 @@ chkvec: eieio ; Make sure this gets out before owner clear - lis r23,hi16(EXT(per_proc_info)) ; Set base per_proc - slwi r22,r22,12 ; Find offset to the owner per_proc - ori r23,r23,lo16(EXT(per_proc_info)) ; Set base per_proc - li r24,VMXowner ; Displacement to VMX owner - add r22,r23,r22 ; Point to the owner per_proc + lis r23,hi16(EXT(PerProcTable)) ; Set base PerProcTable + slwi r22,r22,4 ; Find offset to the owner per_proc_entry + ori r23,r23,lo16(EXT(PerProcTable)) ; Set base PerProcTable + li r24,VMXowner ; Displacement to float owner + add r22,r23,r22 ; Point to the owner per_proc_entry + lwz r22,ppe_vaddr(r22) ; Point to the owner per_proc vmxinvothr: lwarx r23,r24,r22 ; Get the owner @@ -1310,7 +1379,7 @@ vmxchkena: lwz r21,VMXowner(r31) ; Get the ID of the live context vmxena: oris r29,r29,hi16(MASK(MSR_VEC)) ; Enable facility -setena: lwz r18,cioSpace(r28) ; Get the space ID in case we are launching user +setena: lwz r18,umwSpace(r28) ; Get the space ID in case we are launching user rlwinm. r0,r29,0,MSR_PR_BIT,MSR_PR_BIT ; Are we about to launch user state? li r0,0 ; Get set to release quickfret holdoff crmove cr7_eq,cr0_eq ; Remember if we are going to user state @@ -1319,7 +1388,7 @@ setena: lwz r18,cioSpace(r28) ; Get the space ID in case we are launching u rlwinm r20,r29,(((31-vectorCngbit)+(MSR_VEC_BIT+1))&31),vectorCngbit,vectorCngbit ; Set flag if we enabled vector stw r29,savesrr1+4(r27) ; Turn facility on or off stw r0,holdQFret(r31) ; Release quickfret - oris r18,r18,hi16(cioSwitchAway) ; Set the switch-away bit in case we go to user + oris r18,r18,hi16(umwSwitchAway) ; Set the switch-away bit in case we go to user beq setenaa ; Neither float nor vector turned on.... @@ -1362,12 +1431,16 @@ segtb: mftbu r20 ; Get the upper time base mtdec r13 ; Set our value -chkifuser: beq-- cr7,chkenax ; Skip this if we are going to kernel... - stw r18,cioSpace(r28) ; Half-invalidate to force MapUserAddressSpace to reload SRs +chkifuser: addi r4,r28,SYSTEM_TIMER + mftb r3 + beq-- cr7,chkifuser1 ; Skip this if we are going to kernel... + stw r18,umwSpace(r28) ; Half-invalidate to force MapUserAddressWindow to reload SRs + addi r4,r28,USER_TIMER + +chkifuser1: bl EXT(timer_event) chkenax: - #if DEBUG lwz r20,SAVact(r27) ; (TEST/DEBUG) Make sure our restore mfsprg r21, 1 ; (TEST/DEBUG) with the current act. @@ -1445,20 +1518,24 @@ fastpath: cmplwi cr3,r0,0x7FF5 ; Is this a null fastpath? /* * void cthread_set_self(cproc_t p) * - * set's thread state "user_value" + * Set's thread state "user_value". In practice this is the thread-local-data-pointer (TLDP), + * though we do not interpret it. This call is mostly used by 32-bit tasks, but we save all 64 bits + * in case a 64-bit task wants to use this facility. They normally do not, because the 64-bit + * ABI reserves r13 for the TLDP. * * This op is invoked as follows: * li r0, CthreadSetSelfNumber // load the fast-trap number * sc // invoke fast-trap * blr - * */ CthreadSetSelfNumber: - - lwz r5,saver3+4(r4) /* Retrieve the self number */ - stw r5,CTHREAD_SELF(r13) /* Remember it */ - stw r5,UAW(r25) /* Prime the per_proc_info with it */ + lwz r3,saver3+0(r4) /* get the TLDP passed in r3 */ + lwz r5,saver3+4(r4) /* (all 64 bits, in case this is a 64-bit task) */ + stw r3,CTHREAD_SELF+0(r13) /* Remember it in the activation... */ + stw r5,CTHREAD_SELF+4(r13) + stw r3,UAW+0(r25) /* ...and in the per-proc */ + stw r5,UAW+4(r25) .globl EXT(fastexit) @@ -1511,13 +1588,14 @@ exitFromVM: mr r30,r4 ; Get the savearea .globl EXT(retFromVM) LEXT(retFromVM) - mfsprg r10,0 ; Restore the per_proc info + mfsprg r10,1 ; Get the current activation + lwz r10,ACT_PER_PROC(r10) ; Get the per_proc block mr r8,r3 ; Get the activation lwz r4,SAVprev+4(r30) ; Pick up the previous savearea mr r3,r30 ; Put savearea in proper register for common code lwz r11,SAVflags(r30) ; Get the flags of the current savearea rlwinm r11,r11,0,15,13 ; Clear the syscall flag - lwz r1,ACT_THREAD(r8) ; and the active thread + mr r1,r8 stw r11,SAVflags(r3) ; Save back the flags (with reset stack cleared) stw r4,ACT_MACT_PCB(r8) ; Point to the previous savearea (or 0 if none) @@ -1550,7 +1628,8 @@ LEXT(retFromVM) LEXT(chandler) ; Choke handler li r31,0 ; Get a 0 - mfsprg r25,0 ; Get the per_proc + mfsprg r25,1 ; Get the current activation + lwz r25,ACT_PER_PROC(r25) ; Get the per_proc block stw r31,traceMask(0) ; Force tracing off right now @@ -1600,7 +1679,8 @@ versave: lwz r23,0(r22) ; (TEST/DEBUG) mr. r23,r23 ; (TEST/DEBUG) beqlr- ; (TEST/DEBUG) - mfsprg r20,0 ; (TEST/DEBUG) + mfsprg r20,1 ; Get the current activation + lwz r20,ACT_PER_PROC(r20) ; Get the per_proc block lwz r21,pfAvailable(r20) ; (TEST/DEBUG) mr. r21,r21 ; (TEST/DEBUG) bnelr+ ; (TEST/DEBUG)