X-Git-Url: https://git.saurik.com/apple/xnu.git/blobdiff_plain/8f6c56a50524aa785f7e596d52dddfb331e18961..89b3af67bb32e691275bf6fa803d1834b2284115:/osfmk/ppc/pms.h

diff --git a/osfmk/ppc/pms.h b/osfmk/ppc/pms.h
index 9bd9b5d53..9371152c9 100644
--- a/osfmk/ppc/pms.h
+++ b/osfmk/ppc/pms.h
@@ -30,144 +30,6 @@
 
 #ifndef _PPC_PMS_H_
 #define _PPC_PMS_H_
-
-#define pmsMaxStates 64
-#define HalfwayToForever 0x7FFFFFFFFFFFFFFFULL
-#define century 790560000000000ULL
-
-typedef void (*pmsSetFunc_t)(uint32_t, uint32_t, uint32_t);	/* Function used to set hardware power state */
-typedef uint32_t (*pmsQueryFunc_t)(uint32_t, uint32_t);	/* Function used to query hardware power state */
-
-typedef struct pmsStat {
-	uint64_t	stTime[2];			/* Total time until switch to next step */
-	uint32_t	stCnt[2];			/* Number of times switched to next step */
-} pmsStat;
-
-typedef struct pmsDef {
-	uint64_t	pmsLimit;			/* Max time in this state in microseconds */
-	uint32_t	pmsStepID;			/* Unique ID for this step */
-	uint32_t	pmsSetCmd;			/* Command to select power state */
-#define pmsCngXClk  0x80000000		/* Change external clock */
-#define pmsXUnk   	0x7F			/* External clock unknown  */
-#define pmsXClk     0x7F000000		/* External clock frequency */
-#define pmsCngCPU   0x00800000		/* Change CPU parameters */
-#define pmsSync     0x00400000		/* Make changes synchronously, i.e., spin until delay finished */
-#define pmsMustCmp  0x00200000		/* Delay must complete before next change */
-#define pmsCPU      0x001F0000		/* CPU frequency */
-#define pmsCPUUnk	0x1F			/* CPU frequency unknown */
-#define pmsCngVolt  0x00008000		/* Change voltage */
-#define pmsVoltage  0x00007F00		/* Voltage */
-#define pmsVoltUnk	0x7F			/* Voltage unknown */
-#define pmsPowerID  0x000000FF		/* Identify power state to HW */
-
-/*	Special commands - various things */
-#define pmsDelay    0xFFFFFFFD		/* Delayed step, no processor or platform changes.  Timer expiration causes transition to pmsTDelay */
-#define pmsParkIt	0xFFFFFFFF		/* Enters the parked state.  No processor or platform changes.  Timers cancelled */
-#define pmsCInit	((pmsXUnk << 24) | (pmsCPUUnk << 16) | (pmsVoltUnk << 8))	/* Initial current set command value */
-/*	Note:  pmsSetFuncInd is an index into a table of function pointers and pmsSetFunc is the address
- *	of a function.  Initially, when you create a step table, this field is set as an index into
- *	a table of function addresses that gets passed as a parameter to pmsBuild.  When pmsBuild
- *	internalizes the step and function tables, it converts the index to the function address.
- */
-	union sf {
-		pmsSetFunc_t	pmsSetFunc;	/* Function used to set platform power state */
-		uint32_t	pmsSetFuncInd;	/* Index to function in function table */
-	} sf;
-
-	uint32_t	pmsDown;			/* Next state if going lower */
-	uint32_t	pmsNext;			/* Normal next state */
-	uint32_t	pmsTDelay;			/* State if command was pmsDelay and timer expired */
-} pmsDef;
-
-typedef struct pmsCtl {
-	pmsStat		(*pmsStats)[pmsMaxStates];	/* Pointer to statistics information, 0 if not enabled */
-	pmsDef		*pmsDefs[pmsMaxStates];	/* Indexed pointers to steps */
-} pmsCtl;
-
-/*
- *	Note that this block is in the middle of the per_proc and the size (32 bytes)
- *	can't be changed without moving it.
- */
-
-typedef struct pmsd {
-	uint32_t	pmsState;			/* Current power management state */
-	uint32_t	pmsCSetCmd;			/* Current select command */
-	uint64_t	pmsPop;				/* Time of next step */
-	uint64_t	pmsStamp;			/* Time of transition to current state */
-	uint64_t	pmsTime;			/* Total time in this state */
-} pmsd;
-
-/*
- *	Required power management step programs
- */
- 
-enum {
-	pmsIdle      = 0,				/* Power state in idle loop */
-	pmsNorm      = 1,				/* Normal step - usually low power */
-	pmsNormHigh  = 2,				/* Highest power in normal step */
-	pmsBoost     = 3,				/* Boost/overdrive step */
-	pmsLow       = 4,				/* Lowest non-idle power state, no transitions */
-	pmsHigh      = 5,				/* Power step for full on, no transitions */
-	pmsPrepCng   = 6,				/* Prepare for step table change */
-	pmsPrepSleep = 7,				/* Prepare for sleep */
-	pmsOverTemp  = 8,				/* Machine is too hot */
-	pmsEnterNorm = 9,				/* Enter into the normal step program */
-	pmsFree      = 10,				/* First available empty step */
-	pmsStartUp   = 0xFFFFFFFE,		/* Start stepping */
-	pmsParked    = 0xFFFFFFFF		/* Power parked - used when changing stepping table */
-};
-
-/*
- *	Power Management Stepper Control requests
- */
- 
-enum {
-	pmsCPark = 0,					/* Parks the stepper */
-	pmsCStart = 1,					/* Starts normal steppping */
-	pmsCFLow = 2,					/* Forces low power */
-	pmsCFHigh = 3,					/* Forces high power */
-	pmsCCnfg = 4,					/* Loads new stepper program */
-	pmsCQuery = 5,					/* Query current step and state */
-	pmsCExperimental = 6,			/* Enter experimental mode */
-	pmsCFree = 7					/* Next control command to be assigned */
-};
-
-extern pmsCtl pmsCtls;				/* Power Management Stepper control */
-extern uint32_t pmsCtlp;
-extern uint32_t pmsBroadcastWait;	/* Number of outstanding broadcasts */
-extern pmsDef pmsDefault[];
-extern int pmsInstalled;
-extern int pmsExperimental;
-
-#define pmsSetFuncMax 32
-extern pmsSetFunc_t pmsFuncTab[pmsSetFuncMax];
-extern pmsQueryFunc_t pmsQueryFunc;
-extern uint32_t pmsPlatformData;
-
-extern int pmsCntrl(struct savearea *save);
-extern void pmsInit(void);
-extern void pmsStep(int timer);
-extern void pmsDown(void);
-extern void pmsSetStep(uint32_t nstep, int dir);
-extern void pmsRemote(uint32_t nstep);
-extern void pmsCPUSet(uint32_t sel);
-extern uint32_t pmsCPUquery(void);
-extern void pmsCPUConf(void);
-extern void pmsCPUInit(void);
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern kern_return_t pmsBuild(pmsDef *pd, uint32_t pdsize, pmsSetFunc_t *functab, uint32_t platformData, pmsQueryFunc_t queryFunc);
-extern void pmsRun(uint32_t nstep);
-extern void pmsRunLocal(uint32_t nstep);
-extern void pmsPark(void);
-extern void pmsStart(void);
-
-#ifdef __cplusplus
-}
-#endif
-
+#include <kern/pms.h>
 #endif /* _PPC_PMS_H_ */
 #endif /* KERNEL_PRIVATE */