X-Git-Url: https://git.saurik.com/apple/xnu.git/blobdiff_plain/8ad349bb6ed4a0be06e34c92be0d98b92e078db4..c18c124eaa464aaaa5549e99e5a70fc9cbb50944:/EXTERNAL_HEADERS/mach-o/loader.h diff --git a/EXTERNAL_HEADERS/mach-o/loader.h b/EXTERNAL_HEADERS/mach-o/loader.h index 9346e4343..d26ad14e3 100644 --- a/EXTERNAL_HEADERS/mach-o/loader.h +++ b/EXTERNAL_HEADERS/mach-o/loader.h @@ -1,31 +1,24 @@ /* - * Copyright (c) 2000 Apple Computer, Inc. All rights reserved. + * Copyright (c) 1999-2010 Apple Inc. All Rights Reserved. * - * @APPLE_LICENSE_OSREFERENCE_HEADER_START@ + * @APPLE_LICENSE_HEADER_START@ * - * This file contains Original Code and/or Modifications of Original Code - * as defined in and that are subject to the Apple Public Source License - * Version 2.0 (the 'License'). You may not use this file except in - * compliance with the License. The rights granted to you under the - * License may not be used to create, or enable the creation or - * redistribution of, unlawful or unlicensed copies of an Apple operating - * system, or to circumvent, violate, or enable the circumvention or - * violation of, any terms of an Apple operating system software license - * agreement. - * - * Please obtain a copy of the License at - * http://www.opensource.apple.com/apsl/ and read it before using this + * This file contains Original Code and/or Modifications of Original Code + * as defined in and that are subject to the Apple Public Source License + * Version 2.0 (the 'License'). You may not use this file except in + * compliance with the License. Please obtain a copy of the License at + * http://www.opensource.apple.com/apsl/ and read it before using this * file. - * - * The Original Code and all software distributed under the License are - * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER - * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, - * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. - * Please see the License for the specific language governing rights and + * + * The Original Code and all software distributed under the License are + * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER + * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, + * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. + * Please see the License for the specific language governing rights and * limitations under the License. - * - * @APPLE_LICENSE_OSREFERENCE_HEADER_END@ + * + * @APPLE_LICENSE_HEADER_END@ */ #ifndef _MACHO_LOADER_H_ #define _MACHO_LOADER_H_ @@ -33,6 +26,7 @@ /* * This file describes the format of mach object files. */ +#include /* * is needed here for the cpu_type_t and cpu_subtype_t types @@ -54,8 +48,8 @@ #include /* - * The mach header appears at the very beginning of the object file; it - * is the same for both 32-bit and 64-bit architectures. + * The 32-bit mach header appears at the very beginning of the object file for + * 32-bit architectures. */ struct mach_header { uint32_t magic; /* mach magic number identifier */ @@ -67,6 +61,10 @@ struct mach_header { uint32_t flags; /* flags */ }; +/* Constant for the magic field of the mach_header (32-bit architectures) */ +#define MH_MAGIC 0xfeedface /* the mach magic number */ +#define MH_CIGAM 0xcefaedfe /* NXSwapInt(MH_MAGIC) */ + /* * The 64-bit mach header appears at the very beginning of object files for * 64-bit architectures. @@ -82,18 +80,9 @@ struct mach_header_64 { uint32_t reserved; /* reserved */ }; -/* Constant for the magic field of the mach_header (32-bit architectures) */ -#define MH_MAGIC 0xfeedface /* the mach magic number */ -#define MH_CIGAM NXSwapInt(MH_MAGIC) - /* Constant for the magic field of the mach_header_64 (64-bit architectures) */ -#define MH_MAGIC_64 0xfeedfacf /* the 64-bit mach magic number */ -#define MH_CIGAM_64 NXSwapInt(MH_MAGIC_64) - -/* Constants for the cmd field of new load commands, the type */ -#define LC_SEGMENT_64 0x19 /* 64-bit segment of this file to be mapped */ -#define LC_ROUTINES_64 0x1a /* 64-bit image routines */ - +#define MH_MAGIC_64 0xfeedfacf /* the 64-bit mach magic number */ +#define MH_CIGAM_64 0xcffaedfe /* NXSwapInt(MH_MAGIC_64) */ /* * The layout of the file depends on the filetype. For all but the MH_OBJECT @@ -106,10 +95,10 @@ struct mach_header_64 { * assembler and input (and possibly output) of the link editor (the .o * format). All sections are in one unnamed segment with no segment padding. * This format is used as an executable format when the file is so small the - * segment padding greatly increases it's size. + * segment padding greatly increases its size. * * The file type MH_PRELOAD is an executable format intended for things that - * not executed under the kernel (proms, stand alones, kernels, etc). The + * are not executed under the kernel (proms, stand alones, kernels, etc). The * format can be executed under the kernel but may demand paged it and not * preload it before execution. * @@ -123,13 +112,18 @@ struct mach_header_64 { #define MH_FVMLIB 0x3 /* fixed VM shared library file */ #define MH_CORE 0x4 /* core file */ #define MH_PRELOAD 0x5 /* preloaded executable file */ -#define MH_DYLIB 0x6 /* dynamicly bound shared library file*/ +#define MH_DYLIB 0x6 /* dynamically bound shared library */ #define MH_DYLINKER 0x7 /* dynamic link editor */ -#define MH_BUNDLE 0x8 /* dynamicly bound bundle file */ +#define MH_BUNDLE 0x8 /* dynamically bound bundle file */ +#define MH_DYLIB_STUB 0x9 /* shared library stub for static */ + /* linking only, no section contents */ +#define MH_DSYM 0xa /* companion file with only debug */ + /* sections */ +#define MH_KEXT_BUNDLE 0xb /* x86_64 kexts */ /* Constants for the flags field of the mach_header */ #define MH_NOUNDEFS 0x1 /* the object file has no undefined - references, can be executed */ + references */ #define MH_INCRLINK 0x2 /* the object file is the output of an incremental link against a base file and can't be link edited again */ @@ -139,8 +133,79 @@ struct mach_header_64 { #define MH_BINDATLOAD 0x8 /* the object file's undefined references are bound by the dynamic linker when loaded. */ -#define MH_PREBOUND 0x10 /* the file has it's dynamic undefined +#define MH_PREBOUND 0x10 /* the file has its dynamic undefined references prebound. */ +#define MH_SPLIT_SEGS 0x20 /* the file has its read-only and + read-write segments split */ +#define MH_LAZY_INIT 0x40 /* the shared library init routine is + to be run lazily via catching memory + faults to its writeable segments + (obsolete) */ +#define MH_TWOLEVEL 0x80 /* the image is using two-level name + space bindings */ +#define MH_FORCE_FLAT 0x100 /* the executable is forcing all images + to use flat name space bindings */ +#define MH_NOMULTIDEFS 0x200 /* this umbrella guarantees no multiple + defintions of symbols in its + sub-images so the two-level namespace + hints can always be used. */ +#define MH_NOFIXPREBINDING 0x400 /* do not have dyld notify the + prebinding agent about this + executable */ +#define MH_PREBINDABLE 0x800 /* the binary is not prebound but can + have its prebinding redone. only used + when MH_PREBOUND is not set. */ +#define MH_ALLMODSBOUND 0x1000 /* indicates that this binary binds to + all two-level namespace modules of + its dependent libraries. only used + when MH_PREBINDABLE and MH_TWOLEVEL + are both set. */ +#define MH_SUBSECTIONS_VIA_SYMBOLS 0x2000/* safe to divide up the sections into + sub-sections via symbols for dead + code stripping */ +#define MH_CANONICAL 0x4000 /* the binary has been canonicalized + via the unprebind operation */ +#define MH_WEAK_DEFINES 0x8000 /* the final linked image contains + external weak symbols */ +#define MH_BINDS_TO_WEAK 0x10000 /* the final linked image uses + weak symbols */ + +#define MH_ALLOW_STACK_EXECUTION 0x20000/* When this bit is set, all stacks + in the task will be given stack + execution privilege. Only used in + MH_EXECUTE filetypes. */ +#define MH_ROOT_SAFE 0x40000 /* When this bit is set, the binary + declares it is safe for use in + processes with uid zero */ + +#define MH_SETUID_SAFE 0x80000 /* When this bit is set, the binary + declares it is safe for use in + processes when issetugid() is true */ + +#define MH_NO_REEXPORTED_DYLIBS 0x100000 /* When this bit is set on a dylib, + the static linker does not need to + examine dependent dylibs to see + if any are re-exported */ +#define MH_PIE 0x200000 /* When this bit is set, the OS will + load the main executable at a + random address. Only used in + MH_EXECUTE filetypes. */ +#define MH_DEAD_STRIPPABLE_DYLIB 0x400000 /* Only for use on dylibs. When + linking against a dylib that + has this bit set, the static linker + will automatically not create a + LC_LOAD_DYLIB load command to the + dylib if no symbols are being + referenced from the dylib. */ +#define MH_HAS_TLV_DESCRIPTORS 0x800000 /* Contains a section of type + S_THREAD_LOCAL_VARIABLES */ + +#define MH_NO_HEAP_EXECUTION 0x1000000 /* When this bit is set, the OS will + run the main executable with + a non-executable heap even on + platforms (e.g. i386) that don't + require it. Only used in MH_EXECUTE + filetypes. */ /* * The load commands directly follow the mach_header. The total size of all @@ -154,17 +219,27 @@ struct mach_header_64 { * pointer of the current load command. The cmdsize for 32-bit architectures * MUST be a multiple of 4 bytes and for 64-bit architectures MUST be a multiple * of 8 bytes (these are forever the maximum alignment of any load commands). - * sizeof(long) (this is forever the maximum alignment of any load commands). * The padded bytes must be zero. All tables in the object file must also * follow these rules so the file can be memory mapped. Otherwise the pointers * to these tables will not work well or at all on some machines. With all * padding zeroed like objects will compare byte for byte. */ struct load_command { - unsigned long cmd; /* type of load command */ - unsigned long cmdsize; /* total size of command in bytes */ + uint32_t cmd; /* type of load command */ + uint32_t cmdsize; /* total size of command in bytes */ }; +/* + * After MacOS X 10.1 when a new load command is added that is required to be + * understood by the dynamic linker for the image to execute properly the + * LC_REQ_DYLD bit will be or'ed into the load command constant. If the dynamic + * linker sees such a load command it it does not understand will issue a + * "unknown load command required for execution" error and refuse to use the + * image. Other load commands without this bit that are not understood will + * simply be ignored. + */ +#define LC_REQ_DYLD 0x80000000 + /* Constants for the cmd field of all load commands, the type */ #define LC_SEGMENT 0x1 /* segment of this file to be mapped */ #define LC_SYMTAB 0x2 /* link-edit stab symbol table info */ @@ -177,12 +252,50 @@ struct load_command { #define LC_FVMFILE 0x9 /* fixed VM file inclusion (internal use) */ #define LC_PREPAGE 0xa /* prepage command (internal use) */ #define LC_DYSYMTAB 0xb /* dynamic link-edit symbol table info */ -#define LC_LOAD_DYLIB 0xc /* load a dynamicly linked shared library */ -#define LC_ID_DYLIB 0xd /* dynamicly linked shared lib identification */ +#define LC_LOAD_DYLIB 0xc /* load a dynamically linked shared library */ +#define LC_ID_DYLIB 0xd /* dynamically linked shared lib ident */ #define LC_LOAD_DYLINKER 0xe /* load a dynamic linker */ #define LC_ID_DYLINKER 0xf /* dynamic linker identification */ -#define LC_PREBOUND_DYLIB 0x10 /* modules prebound for a dynamicly */ +#define LC_PREBOUND_DYLIB 0x10 /* modules prebound for a dynamically */ /* linked shared library */ +#define LC_ROUTINES 0x11 /* image routines */ +#define LC_SUB_FRAMEWORK 0x12 /* sub framework */ +#define LC_SUB_UMBRELLA 0x13 /* sub umbrella */ +#define LC_SUB_CLIENT 0x14 /* sub client */ +#define LC_SUB_LIBRARY 0x15 /* sub library */ +#define LC_TWOLEVEL_HINTS 0x16 /* two-level namespace lookup hints */ +#define LC_PREBIND_CKSUM 0x17 /* prebind checksum */ + +/* + * load a dynamically linked shared library that is allowed to be missing + * (all symbols are weak imported). + */ +#define LC_LOAD_WEAK_DYLIB (0x18 | LC_REQ_DYLD) + +#define LC_SEGMENT_64 0x19 /* 64-bit segment of this file to be + mapped */ +#define LC_ROUTINES_64 0x1a /* 64-bit image routines */ +#define LC_UUID 0x1b /* the uuid */ +#define LC_RPATH (0x1c | LC_REQ_DYLD) /* runpath additions */ +#define LC_CODE_SIGNATURE 0x1d /* local of code signature */ +#define LC_SEGMENT_SPLIT_INFO 0x1e /* local of info to split segments */ +#define LC_REEXPORT_DYLIB (0x1f | LC_REQ_DYLD) /* load and re-export dylib */ +#define LC_LAZY_LOAD_DYLIB 0x20 /* delay load of dylib until first use */ +#define LC_ENCRYPTION_INFO 0x21 /* encrypted segment information */ +#define LC_DYLD_INFO 0x22 /* compressed dyld information */ +#define LC_DYLD_INFO_ONLY (0x22|LC_REQ_DYLD) /* compressed dyld information only */ +#define LC_LOAD_UPWARD_DYLIB (0x23 | LC_REQ_DYLD) /* load upward dylib */ +#define LC_VERSION_MIN_MACOSX 0x24 /* build for MacOSX min OS version */ +#define LC_VERSION_MIN_IPHONEOS 0x25 /* build for iPhoneOS min OS version */ +#define LC_FUNCTION_STARTS 0x26 /* compressed table of function start addresses */ +#define LC_DYLD_ENVIRONMENT 0x27 /* string for dyld to treat + like environment variable */ +#define LC_MAIN (0x28|LC_REQ_DYLD) /* replacement for LC_UNIXTHREAD */ +#define LC_DATA_IN_CODE 0x29 /* table of non-instructions in __text */ +#define LC_SOURCE_VERSION 0x2A /* source version used to build binary */ +#define LC_DYLIB_CODE_SIGN_DRS 0x2B /* Code signing DRs copied from linked dylibs */ +#define LC_ENCRYPTION_INFO_64 0x2C /* 64-bit encrypted segment information */ + /* * A variable length string in a load command is represented by an lc_str @@ -190,11 +303,13 @@ struct load_command { * the offset is from the start of the load command structure. The size * of the string is reflected in the cmdsize field of the load command. * Once again any padded bytes to bring the cmdsize field to a multiple - * of sizeof(long) must be zero. + * of 4 bytes must be zero. */ union lc_str { - unsigned long offset; /* offset to the string */ + uint32_t offset; /* offset to the string */ +#ifndef __LP64__ char *ptr; /* pointer to the string */ +#endif }; /* @@ -209,18 +324,18 @@ union lc_str { * section structures directly follow the segment command and their size is * reflected in cmdsize. */ -struct segment_command { /* for 32-bit architectures */ - unsigned long cmd; /* LC_SEGMENT */ - unsigned long cmdsize; /* includes sizeof section structs */ +struct segment_command { /* for 32-bit architectures */ + uint32_t cmd; /* LC_SEGMENT */ + uint32_t cmdsize; /* includes sizeof section structs */ char segname[16]; /* segment name */ - unsigned long vmaddr; /* memory address of this segment */ - unsigned long vmsize; /* memory size of this segment */ - unsigned long fileoff; /* file offset of this segment */ - unsigned long filesize; /* amount to map from the file */ + uint32_t vmaddr; /* memory address of this segment */ + uint32_t vmsize; /* memory size of this segment */ + uint32_t fileoff; /* file offset of this segment */ + uint32_t filesize; /* amount to map from the file */ vm_prot_t maxprot; /* maximum VM protection */ vm_prot_t initprot; /* initial VM protection */ - unsigned long nsects; /* number of sections in segment */ - unsigned long flags; /* flags */ + uint32_t nsects; /* number of sections in segment */ + uint32_t flags; /* flags */ }; /* @@ -229,7 +344,7 @@ struct segment_command { /* for 32-bit architectures */ * sections then section_64 structures directly follow the 64-bit segment * command and their size is reflected in cmdsize. */ -struct segment_command_64 { /* for 64-bit architectures */ +struct segment_command_64 { /* for 64-bit architectures */ uint32_t cmd; /* LC_SEGMENT_64 */ uint32_t cmdsize; /* includes sizeof section_64 structs */ char segname[16]; /* segment name */ @@ -243,7 +358,6 @@ struct segment_command_64 { /* for 64-bit architectures */ uint32_t flags; /* flags */ }; - /* Constants for the flags field of the segment_command */ #define SG_HIGHVM 0x1 /* the file contents for this segment is for the high part of the VM space, the low part @@ -254,20 +368,25 @@ struct segment_command_64 { /* for 64-bit architectures */ #define SG_NORELOC 0x4 /* this segment has nothing that was relocated in it and nothing relocated to it, that is it maybe safely replaced without relocation*/ +#define SG_PROTECTED_VERSION_1 0x8 /* This segment is protected. If the + segment starts at file offset 0, the + first page of the segment is not + protected. All other pages of the + segment are protected. */ /* * A segment is made up of zero or more sections. Non-MH_OBJECT files have * all of their segments with the proper sections in each, and padded to the * specified segment alignment when produced by the link editor. The first * segment of a MH_EXECUTE and MH_FVMLIB format file contains the mach_header - * and load commands of the object file before it's first section. The zero + * and load commands of the object file before its first section. The zero * fill sections are always last in their segment (in all formats). This * allows the zeroed segment padding to be mapped into memory where zero fill * sections might be. The gigabyte zero fill sections, those with the section * type S_GB_ZEROFILL, can only be in a segment with sections of this type. * These segments are then placed after all other segments. * - * The MH_OBJECT format has all of it's sections in one segment for + * The MH_OBJECT format has all of its sections in one segment for * compactness. There is no padding to a specified segment boundary and the * mach_header and load commands are not part of the segment. * @@ -282,18 +401,18 @@ struct segment_command_64 { /* for 64-bit architectures */ * fields of the section structure for mach object files is described in the * header file . */ -struct section { /* for 32-bit architectures */ +struct section { /* for 32-bit architectures */ char sectname[16]; /* name of this section */ char segname[16]; /* segment this section goes in */ - unsigned long addr; /* memory address of this section */ - unsigned long size; /* size in bytes of this section */ - unsigned long offset; /* file offset of this section */ - unsigned long align; /* section alignment (power of 2) */ - unsigned long reloff; /* file offset of relocation entries */ - unsigned long nreloc; /* number of relocation entries */ - unsigned long flags; /* flags (section type and attributes)*/ - unsigned long reserved1; /* reserved */ - unsigned long reserved2; /* reserved */ + uint32_t addr; /* memory address of this section */ + uint32_t size; /* size in bytes of this section */ + uint32_t offset; /* file offset of this section */ + uint32_t align; /* section alignment (power of 2) */ + uint32_t reloff; /* file offset of relocation entries */ + uint32_t nreloc; /* number of relocation entries */ + uint32_t flags; /* flags (section type and attributes)*/ + uint32_t reserved1; /* reserved (for offset or index) */ + uint32_t reserved2; /* reserved (for count or sizeof) */ }; struct section_64 { /* for 64-bit architectures */ @@ -311,7 +430,6 @@ struct section_64 { /* for 64-bit architectures */ uint32_t reserved3; /* reserved */ }; - /* * The flags field of a section structure is separated into two parts a section * type and section attributes. The section types are mutually exclusive (it @@ -350,6 +468,37 @@ struct section_64 { /* for 64-bit architectures */ the reserved2 field */ #define S_MOD_INIT_FUNC_POINTERS 0x9 /* section with only function pointers for initialization*/ +#define S_MOD_TERM_FUNC_POINTERS 0xa /* section with only function + pointers for termination */ +#define S_COALESCED 0xb /* section contains symbols that + are to be coalesced */ +#define S_GB_ZEROFILL 0xc /* zero fill on demand section + (that can be larger than 4 + gigabytes) */ +#define S_INTERPOSING 0xd /* section with only pairs of + function pointers for + interposing */ +#define S_16BYTE_LITERALS 0xe /* section with only 16 byte + literals */ +#define S_DTRACE_DOF 0xf /* section contains + DTrace Object Format */ +#define S_LAZY_DYLIB_SYMBOL_POINTERS 0x10 /* section with only lazy + symbol pointers to lazy + loaded dylibs */ +/* + * Section types to support thread local variables + */ +#define S_THREAD_LOCAL_REGULAR 0x11 /* template of initial + values for TLVs */ +#define S_THREAD_LOCAL_ZEROFILL 0x12 /* template of initial + values for TLVs */ +#define S_THREAD_LOCAL_VARIABLES 0x13 /* TLV descriptors */ +#define S_THREAD_LOCAL_VARIABLE_POINTERS 0x14 /* pointers to TLV + descriptors */ +#define S_THREAD_LOCAL_INIT_FUNCTION_POINTERS 0x15 /* functions to call + to initialize TLV + values */ + /* * Constants for the section attributes part of the flags field of a section * structure. @@ -357,6 +506,28 @@ struct section_64 { /* for 64-bit architectures */ #define SECTION_ATTRIBUTES_USR 0xff000000 /* User setable attributes */ #define S_ATTR_PURE_INSTRUCTIONS 0x80000000 /* section contains only true machine instructions */ +#define S_ATTR_NO_TOC 0x40000000 /* section contains coalesced + symbols that are not to be + in a ranlib table of + contents */ +#define S_ATTR_STRIP_STATIC_SYMS 0x20000000 /* ok to strip static symbols + in this section in files + with the MH_DYLDLINK flag */ +#define S_ATTR_NO_DEAD_STRIP 0x10000000 /* no dead stripping */ +#define S_ATTR_LIVE_SUPPORT 0x08000000 /* blocks are live if they + reference live blocks */ +#define S_ATTR_SELF_MODIFYING_CODE 0x04000000 /* Used with i386 code stubs + written on by dyld */ +/* + * If a segment contains any sections marked with S_ATTR_DEBUG then all + * sections in that segment must have this attribute. No section other than + * a section marked with this attribute may reference the contents of this + * section. A section with this attribute may contain no symbols and must have + * a section type S_REGULAR. The static linker will not copy section contents + * from sections with this attribute into its output file. These sections + * generally contain DWARF debugging info. + */ +#define S_ATTR_DEBUG 0x02000000 /* a debug section */ #define SECTION_ATTRIBUTES_SYS 0x00ffff00 /* system setable attributes */ #define S_ATTR_SOME_INSTRUCTIONS 0x00000400 /* section contains some machine instructions */ @@ -410,7 +581,7 @@ struct section_64 { /* for 64-bit architectures */ #define SECT_OBJC_STRINGS "__selector_strs" /* string table */ #define SECT_OBJC_REFS "__selector_refs" /* string table */ -#define SEG_ICON "__ICON" /* the NeXT icon segment */ +#define SEG_ICON "__ICON" /* the icon segment */ #define SECT_ICON_HEADER "__header" /* the icon headers */ #define SECT_ICON_TIFF "__tiff" /* the icons in tiff format */ @@ -422,16 +593,20 @@ struct section_64 { /* for 64-bit architectures */ #define SEG_UNIXSTACK "__UNIXSTACK" /* the unix stack segment */ +#define SEG_IMPORT "__IMPORT" /* the segment for the self (dyld) */ + /* modifing code stubs that has read, */ + /* write and execute permissions */ + /* * Fixed virtual memory shared libraries are identified by two things. The * target pathname (the name of the library as found for execution), and the * minor version number. The address of where the headers are loaded is in - * header_addr. + * header_addr. (THIS IS OBSOLETE and no longer supported). */ struct fvmlib { union lc_str name; /* library's target pathname */ - unsigned long minor_version; /* library's minor version number */ - unsigned long header_addr; /* library's header address */ + uint32_t minor_version; /* library's minor version number */ + uint32_t header_addr; /* library's header address */ }; /* @@ -439,10 +614,11 @@ struct fvmlib { * contains a fvmlib_command (cmd == LC_IDFVMLIB) to identify the library. * An object that uses a fixed virtual shared library also contains a * fvmlib_command (cmd == LC_LOADFVMLIB) for each library it uses. + * (THIS IS OBSOLETE and no longer supported). */ struct fvmlib_command { - unsigned long cmd; /* LC_IDFVMLIB or LC_LOADFVMLIB */ - unsigned long cmdsize; /* includes pathname string */ + uint32_t cmd; /* LC_IDFVMLIB or LC_LOADFVMLIB */ + uint32_t cmdsize; /* includes pathname string */ struct fvmlib fvmlib; /* the library identification */ }; @@ -457,26 +633,99 @@ struct fvmlib_command { */ struct dylib { union lc_str name; /* library's path name */ - unsigned long timestamp; /* library's build time stamp */ - unsigned long current_version; /* library's current version number */ - unsigned long compatibility_version;/* library's compatibility vers number*/ + uint32_t timestamp; /* library's build time stamp */ + uint32_t current_version; /* library's current version number */ + uint32_t compatibility_version; /* library's compatibility vers number*/ }; /* - * A dynamicly linked shared library (filetype == MH_DYLIB in the mach header) + * A dynamically linked shared library (filetype == MH_DYLIB in the mach header) * contains a dylib_command (cmd == LC_ID_DYLIB) to identify the library. - * An object that uses a dynamicly linked shared library also contains a - * dylib_command (cmd == LC_LOAD_DYLIB) for each library it uses. + * An object that uses a dynamically linked shared library also contains a + * dylib_command (cmd == LC_LOAD_DYLIB, LC_LOAD_WEAK_DYLIB, or + * LC_REEXPORT_DYLIB) for each library it uses. */ struct dylib_command { - unsigned long cmd; /* LC_ID_DYLIB or LC_LOAD_DYLIB */ - unsigned long cmdsize; /* includes pathname string */ + uint32_t cmd; /* LC_ID_DYLIB, LC_LOAD_{,WEAK_}DYLIB, + LC_REEXPORT_DYLIB */ + uint32_t cmdsize; /* includes pathname string */ struct dylib dylib; /* the library identification */ }; /* - * A program (filetype == MH_EXECUTE) or bundle (filetype == MH_BUNDLE) that is - * prebound to it's dynamic libraries has one of these for each library that + * A dynamically linked shared library may be a subframework of an umbrella + * framework. If so it will be linked with "-umbrella umbrella_name" where + * Where "umbrella_name" is the name of the umbrella framework. A subframework + * can only be linked against by its umbrella framework or other subframeworks + * that are part of the same umbrella framework. Otherwise the static link + * editor produces an error and states to link against the umbrella framework. + * The name of the umbrella framework for subframeworks is recorded in the + * following structure. + */ +struct sub_framework_command { + uint32_t cmd; /* LC_SUB_FRAMEWORK */ + uint32_t cmdsize; /* includes umbrella string */ + union lc_str umbrella; /* the umbrella framework name */ +}; + +/* + * For dynamically linked shared libraries that are subframework of an umbrella + * framework they can allow clients other than the umbrella framework or other + * subframeworks in the same umbrella framework. To do this the subframework + * is built with "-allowable_client client_name" and an LC_SUB_CLIENT load + * command is created for each -allowable_client flag. The client_name is + * usually a framework name. It can also be a name used for bundles clients + * where the bundle is built with "-client_name client_name". + */ +struct sub_client_command { + uint32_t cmd; /* LC_SUB_CLIENT */ + uint32_t cmdsize; /* includes client string */ + union lc_str client; /* the client name */ +}; + +/* + * A dynamically linked shared library may be a sub_umbrella of an umbrella + * framework. If so it will be linked with "-sub_umbrella umbrella_name" where + * Where "umbrella_name" is the name of the sub_umbrella framework. When + * staticly linking when -twolevel_namespace is in effect a twolevel namespace + * umbrella framework will only cause its subframeworks and those frameworks + * listed as sub_umbrella frameworks to be implicited linked in. Any other + * dependent dynamic libraries will not be linked it when -twolevel_namespace + * is in effect. The primary library recorded by the static linker when + * resolving a symbol in these libraries will be the umbrella framework. + * Zero or more sub_umbrella frameworks may be use by an umbrella framework. + * The name of a sub_umbrella framework is recorded in the following structure. + */ +struct sub_umbrella_command { + uint32_t cmd; /* LC_SUB_UMBRELLA */ + uint32_t cmdsize; /* includes sub_umbrella string */ + union lc_str sub_umbrella; /* the sub_umbrella framework name */ +}; + +/* + * A dynamically linked shared library may be a sub_library of another shared + * library. If so it will be linked with "-sub_library library_name" where + * Where "library_name" is the name of the sub_library shared library. When + * staticly linking when -twolevel_namespace is in effect a twolevel namespace + * shared library will only cause its subframeworks and those frameworks + * listed as sub_umbrella frameworks and libraries listed as sub_libraries to + * be implicited linked in. Any other dependent dynamic libraries will not be + * linked it when -twolevel_namespace is in effect. The primary library + * recorded by the static linker when resolving a symbol in these libraries + * will be the umbrella framework (or dynamic library). Zero or more sub_library + * shared libraries may be use by an umbrella framework or (or dynamic library). + * The name of a sub_library framework is recorded in the following structure. + * For example /usr/lib/libobjc_profile.A.dylib would be recorded as "libobjc". + */ +struct sub_library_command { + uint32_t cmd; /* LC_SUB_LIBRARY */ + uint32_t cmdsize; /* includes sub_library string */ + union lc_str sub_library; /* the sub_library name */ +}; + +/* + * A program (filetype == MH_EXECUTE) that is + * prebound to its dynamic libraries has one of these for each library that * the static linker used in prebinding. It contains a bit vector for the * modules in the library. The bits indicate which modules are bound (1) and * which are not (0) from the library. The bit for module 0 is the low bit @@ -484,10 +733,10 @@ struct dylib_command { * (linked_modules[N/8] >> N%8) & 1 */ struct prebound_dylib_command { - unsigned long cmd; /* LC_PREBOUND_DYLIB */ - unsigned long cmdsize; /* includes strings */ + uint32_t cmd; /* LC_PREBOUND_DYLIB */ + uint32_t cmdsize; /* includes strings */ union lc_str name; /* library's path name */ - unsigned long nmodules; /* number of modules in library */ + uint32_t nmodules; /* number of modules in library */ union lc_str linked_modules; /* bit vector of linked modules */ }; @@ -496,10 +745,13 @@ struct prebound_dylib_command { * the name of the dynamic linker (LC_LOAD_DYLINKER). And a dynamic linker * contains a dylinker_command to identify the dynamic linker (LC_ID_DYLINKER). * A file can have at most one of these. + * This struct is also used for the LC_DYLD_ENVIRONMENT load command and + * contains string for dyld to treat like environment variable. */ struct dylinker_command { - unsigned long cmd; /* LC_ID_DYLINKER or LC_LOAD_DYLINKER */ - unsigned long cmdsize; /* includes pathname string */ + uint32_t cmd; /* LC_ID_DYLINKER, LC_LOAD_DYLINKER or + LC_DYLD_ENVIRONMENT */ + uint32_t cmdsize; /* includes pathname string */ union lc_str name; /* dynamic linker's path name */ }; @@ -508,13 +760,13 @@ struct dylinker_command { * use in the thread state primitives. The machine specific data structures * follow the struct thread_command as follows. * Each flavor of machine specific data structure is preceded by an unsigned - * long constant for the flavor of that data structure, an unsigned long + * long constant for the flavor of that data structure, an uint32_t * that is the count of longs of the size of the state data structure and then * the state data structure follows. This triple may be repeated for many * flavors. The constants for the flavors, counts and state data structure * definitions are expected to be in the header file . * These machine specific data structures sizes must be multiples of - * sizeof(long). The cmdsize reflects the total size of the thread_command + * 4 bytes The cmdsize reflects the total size of the thread_command * and all of the sizes of the constants for the flavors, counts and state * data structures. * @@ -525,31 +777,70 @@ struct dylinker_command { * and environment variables are copied onto that stack. */ struct thread_command { - unsigned long cmd; /* LC_THREAD or LC_UNIXTHREAD */ - unsigned long cmdsize; /* total size of this command */ - /* unsigned long flavor flavor of thread state */ - /* unsigned long count count of longs in thread state */ + uint32_t cmd; /* LC_THREAD or LC_UNIXTHREAD */ + uint32_t cmdsize; /* total size of this command */ + /* uint32_t flavor flavor of thread state */ + /* uint32_t count count of longs in thread state */ /* struct XXX_thread_state state thread state for this flavor */ /* ... */ }; +/* + * The routines command contains the address of the dynamic shared library + * initialization routine and an index into the module table for the module + * that defines the routine. Before any modules are used from the library the + * dynamic linker fully binds the module that defines the initialization routine + * and then calls it. This gets called before any module initialization + * routines (used for C++ static constructors) in the library. + */ +struct routines_command { /* for 32-bit architectures */ + uint32_t cmd; /* LC_ROUTINES */ + uint32_t cmdsize; /* total size of this command */ + uint32_t init_address; /* address of initialization routine */ + uint32_t init_module; /* index into the module table that */ + /* the init routine is defined in */ + uint32_t reserved1; + uint32_t reserved2; + uint32_t reserved3; + uint32_t reserved4; + uint32_t reserved5; + uint32_t reserved6; +}; + +/* + * The 64-bit routines command. Same use as above. + */ +struct routines_command_64 { /* for 64-bit architectures */ + uint32_t cmd; /* LC_ROUTINES_64 */ + uint32_t cmdsize; /* total size of this command */ + uint64_t init_address; /* address of initialization routine */ + uint64_t init_module; /* index into the module table that */ + /* the init routine is defined in */ + uint64_t reserved1; + uint64_t reserved2; + uint64_t reserved3; + uint64_t reserved4; + uint64_t reserved5; + uint64_t reserved6; +}; + /* * The symtab_command contains the offsets and sizes of the link-edit 4.3BSD * "stab" style symbol table information as described in the header files * and . */ struct symtab_command { - unsigned long cmd; /* LC_SYMTAB */ - unsigned long cmdsize; /* sizeof(struct symtab_command) */ - unsigned long symoff; /* symbol table offset */ - unsigned long nsyms; /* number of symbol table entries */ - unsigned long stroff; /* string table offset */ - unsigned long strsize; /* string table size in bytes */ + uint32_t cmd; /* LC_SYMTAB */ + uint32_t cmdsize; /* sizeof(struct symtab_command) */ + uint32_t symoff; /* symbol table offset */ + uint32_t nsyms; /* number of symbol table entries */ + uint32_t stroff; /* string table offset */ + uint32_t strsize; /* string table size in bytes */ }; /* * This is the second set of the symbolic information which is used to support - * the data structures for the dynamicly link editor. + * the data structures for the dynamically link editor. * * The original set of symbolic information in the symtab_command which contains * the symbol and string tables must also be present when this load command is @@ -557,7 +848,9 @@ struct symtab_command { * into three groups of symbols: * local symbols (static and debugging symbols) - grouped by module * defined external symbols - grouped by module (sorted by name if not lib) - * undefined external symbols (sorted by name) + * undefined external symbols (sorted by name if MH_BINDATLOAD is not set, + * and in order the were seen by the static + * linker if MH_BINDATLOAD is set) * In this load command there are offsets and counts to each of the three groups * of symbols. * @@ -568,7 +861,7 @@ struct symtab_command { * reference symbol table * indirect symbol table * The first three tables above (the table of contents, module table and - * reference symbol table) are only present if the file is a dynamicly linked + * reference symbol table) are only present if the file is a dynamically linked * shared library. For executable and object modules, which are files * containing only one module, the information that would be in these three * tables is determined as follows: @@ -577,7 +870,7 @@ struct symtab_command { * file is part of the module. * reference symbol table - is the defined and undefined external symbols * - * For dynamicly linked shared library files this load command also contains + * For dynamically linked shared library files this load command also contains * offsets and sizes to the pool of relocation entries for all sections * separated into two groups: * external relocation entries @@ -586,8 +879,8 @@ struct symtab_command { * off the section structures. */ struct dysymtab_command { - unsigned long cmd; /* LC_DYSYMTAB */ - unsigned long cmdsize; /* sizeof(struct dysymtab_command) */ + uint32_t cmd; /* LC_DYSYMTAB */ + uint32_t cmdsize; /* sizeof(struct dysymtab_command) */ /* * The symbols indicated by symoff and nsyms of the LC_SYMTAB load command @@ -602,51 +895,51 @@ struct dysymtab_command { * * The last two groups are used by the dynamic binding process to do the * binding (indirectly through the module table and the reference symbol - * table when this is a dynamicly linked shared library file). + * table when this is a dynamically linked shared library file). */ - unsigned long ilocalsym; /* index to local symbols */ - unsigned long nlocalsym; /* number of local symbols */ + uint32_t ilocalsym; /* index to local symbols */ + uint32_t nlocalsym; /* number of local symbols */ - unsigned long iextdefsym; /* index to externally defined symbols */ - unsigned long nextdefsym; /* number of externally defined symbols */ + uint32_t iextdefsym;/* index to externally defined symbols */ + uint32_t nextdefsym;/* number of externally defined symbols */ - unsigned long iundefsym; /* index to undefined symbols */ - unsigned long nundefsym; /* number of undefined symbols */ + uint32_t iundefsym; /* index to undefined symbols */ + uint32_t nundefsym; /* number of undefined symbols */ /* * For the for the dynamic binding process to find which module a symbol * is defined in the table of contents is used (analogous to the ranlib * structure in an archive) which maps defined external symbols to modules - * they are defined in. This exists only in a dynamicly linked shared + * they are defined in. This exists only in a dynamically linked shared * library file. For executable and object modules the defined external * symbols are sorted by name and is use as the table of contents. */ - unsigned long tocoff; /* file offset to table of contents */ - unsigned long ntoc; /* number of entries in table of contents */ + uint32_t tocoff; /* file offset to table of contents */ + uint32_t ntoc; /* number of entries in table of contents */ /* * To support dynamic binding of "modules" (whole object files) the symbol * table must reflect the modules that the file was created from. This is * done by having a module table that has indexes and counts into the merged * tables for each module. The module structure that these two entries - * refer to is described below. This exists only in a dynamicly linked + * refer to is described below. This exists only in a dynamically linked * shared library file. For executable and object modules the file only * contains one module so everything in the file belongs to the module. */ - unsigned long modtaboff; /* file offset to module table */ - unsigned long nmodtab; /* number of module table entries */ + uint32_t modtaboff; /* file offset to module table */ + uint32_t nmodtab; /* number of module table entries */ /* * To support dynamic module binding the module structure for each module * indicates the external references (defined and undefined) each module * makes. For each module there is an offset and a count into the * reference symbol table for the symbols that the module references. - * This exists only in a dynamicly linked shared library file. For + * This exists only in a dynamically linked shared library file. For * executable and object modules the defined external symbols and the * undefined external symbols indicates the external references. */ - unsigned long extrefsymoff; /* offset to referenced symbol table */ - unsigned long nextrefsyms; /* number of referenced symbol table entries */ + uint32_t extrefsymoff; /* offset to referenced symbol table */ + uint32_t nextrefsyms; /* number of referenced symbol table entries */ /* * The sections that contain "symbol pointers" and "routine stubs" have @@ -658,8 +951,8 @@ struct dysymtab_command { * the symbol table to the symbol that the pointer or stub is referring to. * The indirect symbol table is ordered to match the entries in the section. */ - unsigned long indirectsymoff; /* file offset to the indirect symbol table */ - unsigned long nindirectsyms; /* number of indirect symbol table entries */ + uint32_t indirectsymoff; /* file offset to the indirect symbol table */ + uint32_t nindirectsyms; /* number of indirect symbol table entries */ /* * To support relocating an individual module in a library file quickly the @@ -677,6 +970,8 @@ struct dysymtab_command { * this requires the r_address field to be something other than a section * offset to identify the item to be relocated. In this case r_address is * set to the offset from the vmaddr of the first LC_SEGMENT command. + * For MH_SPLIT_SEGS images r_address is set to the the offset from the + * vmaddr of the first read-write LC_SEGMENT command. * * The relocation entries are grouped by module and the module table * entries have indexes and counts into them for the group of external @@ -686,16 +981,16 @@ struct dysymtab_command { * remaining external relocation entries for them (for merged sections * remaining relocation entries must be local). */ - unsigned long extreloff; /* offset to external relocation entries */ - unsigned long nextrel; /* number of external relocation entries */ + uint32_t extreloff; /* offset to external relocation entries */ + uint32_t nextrel; /* number of external relocation entries */ /* * All the local relocation entries are grouped together (they are not * grouped by their module since they are only used if the object is moved * from it staticly link edited address). */ - unsigned long locreloff; /* offset to local relocation entries */ - unsigned long nlocrel; /* number of local relocation entries */ + uint32_t locreloff; /* offset to local relocation entries */ + uint32_t nlocrel; /* number of local relocation entries */ }; @@ -712,63 +1007,66 @@ struct dysymtab_command { /* a table of contents entry */ struct dylib_table_of_contents { - unsigned long symbol_index; /* the defined external symbol + uint32_t symbol_index; /* the defined external symbol (index into the symbol table) */ - unsigned long module_index; /* index into the module table this symbol + uint32_t module_index; /* index into the module table this symbol is defined in */ }; /* a module table entry */ struct dylib_module { - unsigned long module_name; /* the module name (index into string table) */ + uint32_t module_name; /* the module name (index into string table) */ - unsigned long iextdefsym; /* index into externally defined symbols */ - unsigned long nextdefsym; /* number of externally defined symbols */ - unsigned long irefsym; /* index into reference symbol table */ - unsigned long nrefsym; /* number of reference symbol table entries */ - unsigned long ilocalsym; /* index into symbols for local symbols */ - unsigned long nlocalsym; /* number of local symbols */ + uint32_t iextdefsym; /* index into externally defined symbols */ + uint32_t nextdefsym; /* number of externally defined symbols */ + uint32_t irefsym; /* index into reference symbol table */ + uint32_t nrefsym; /* number of reference symbol table entries */ + uint32_t ilocalsym; /* index into symbols for local symbols */ + uint32_t nlocalsym; /* number of local symbols */ - unsigned long iextrel; /* index into external relocation entries */ - unsigned long nextrel; /* number of external relocation entries */ + uint32_t iextrel; /* index into external relocation entries */ + uint32_t nextrel; /* number of external relocation entries */ - unsigned long iinit; /* index into the init section */ - unsigned long ninit; /* number of init section entries */ + uint32_t iinit_iterm; /* low 16 bits are the index into the init + section, high 16 bits are the index into + the term section */ + uint32_t ninit_nterm; /* low 16 bits are the number of init section + entries, high 16 bits are the number of + term section entries */ - unsigned long /* for this module address of the start of */ + uint32_t /* for this module address of the start of */ objc_module_info_addr; /* the (__OBJC,__module_info) section */ - unsigned long /* for this module size of */ + uint32_t /* for this module size of */ objc_module_info_size; /* the (__OBJC,__module_info) section */ }; /* a 64-bit module table entry */ struct dylib_module_64 { - uint32_t module_name; /* the module name (index into string table) */ + uint32_t module_name; /* the module name (index into string table) */ - uint32_t iextdefsym; /* index into externally defined symbols */ - uint32_t nextdefsym; /* number of externally defined symbols */ - uint32_t irefsym; /* index into reference symbol table */ - uint32_t nrefsym; /* number of reference symbol table entries */ - uint32_t ilocalsym; /* index into symbols for local symbols */ - uint32_t nlocalsym; /* number of local symbols */ + uint32_t iextdefsym; /* index into externally defined symbols */ + uint32_t nextdefsym; /* number of externally defined symbols */ + uint32_t irefsym; /* index into reference symbol table */ + uint32_t nrefsym; /* number of reference symbol table entries */ + uint32_t ilocalsym; /* index into symbols for local symbols */ + uint32_t nlocalsym; /* number of local symbols */ - uint32_t iextrel; /* index into external relocation entries */ - uint32_t nextrel; /* number of external relocation entries */ + uint32_t iextrel; /* index into external relocation entries */ + uint32_t nextrel; /* number of external relocation entries */ - uint32_t iinit_iterm; /* low 16 bits are the index into the init + uint32_t iinit_iterm; /* low 16 bits are the index into the init section, high 16 bits are the index into the term section */ - uint32_t ninit_nterm; /* low 16 bits are the number of init section - entries, high 16 bits are the number of - term section entries */ - - uint32_t /* for this module size of the */ - objc_module_info_size; /* (__OBJC,__module_info) section */ - uint64_t /* for this module address of the start of */ - objc_module_info_addr; /* the (__OBJC,__module_info) section */ + uint32_t ninit_nterm; /* low 16 bits are the number of init section + entries, high 16 bits are the number of + term section entries */ + + uint32_t /* for this module size of */ + objc_module_info_size; /* the (__OBJC,__module_info) section */ + uint64_t /* for this module address of the start of */ + objc_module_info_addr; /* the (__OBJC,__module_info) section */ }; - /* * The entries in the reference symbol table are used when loading the module * (both by the static and dynamic link editors) and if the module is unloaded @@ -778,48 +1076,398 @@ struct dylib_module_64 { * as they are also used for symbol table entries. */ struct dylib_reference { - unsigned long isym:24, /* index into the symbol table */ + uint32_t isym:24, /* index into the symbol table */ flags:8; /* flags to indicate the type of reference */ }; +/* + * The twolevel_hints_command contains the offset and number of hints in the + * two-level namespace lookup hints table. + */ +struct twolevel_hints_command { + uint32_t cmd; /* LC_TWOLEVEL_HINTS */ + uint32_t cmdsize; /* sizeof(struct twolevel_hints_command) */ + uint32_t offset; /* offset to the hint table */ + uint32_t nhints; /* number of hints in the hint table */ +}; + +/* + * The entries in the two-level namespace lookup hints table are twolevel_hint + * structs. These provide hints to the dynamic link editor where to start + * looking for an undefined symbol in a two-level namespace image. The + * isub_image field is an index into the sub-images (sub-frameworks and + * sub-umbrellas list) that made up the two-level image that the undefined + * symbol was found in when it was built by the static link editor. If + * isub-image is 0 the the symbol is expected to be defined in library and not + * in the sub-images. If isub-image is non-zero it is an index into the array + * of sub-images for the umbrella with the first index in the sub-images being + * 1. The array of sub-images is the ordered list of sub-images of the umbrella + * that would be searched for a symbol that has the umbrella recorded as its + * primary library. The table of contents index is an index into the + * library's table of contents. This is used as the starting point of the + * binary search or a directed linear search. + */ +struct twolevel_hint { + uint32_t + isub_image:8, /* index into the sub images */ + itoc:24; /* index into the table of contents */ +}; + +/* + * The prebind_cksum_command contains the value of the original check sum for + * prebound files or zero. When a prebound file is first created or modified + * for other than updating its prebinding information the value of the check sum + * is set to zero. When the file has it prebinding re-done and if the value of + * the check sum is zero the original check sum is calculated and stored in + * cksum field of this load command in the output file. If when the prebinding + * is re-done and the cksum field is non-zero it is left unchanged from the + * input file. + */ +struct prebind_cksum_command { + uint32_t cmd; /* LC_PREBIND_CKSUM */ + uint32_t cmdsize; /* sizeof(struct prebind_cksum_command) */ + uint32_t cksum; /* the check sum or zero */ +}; + +/* + * The uuid load command contains a single 128-bit unique random number that + * identifies an object produced by the static link editor. + */ +struct uuid_command { + uint32_t cmd; /* LC_UUID */ + uint32_t cmdsize; /* sizeof(struct uuid_command) */ + uint8_t uuid[16]; /* the 128-bit uuid */ +}; + +/* + * The rpath_command contains a path which at runtime should be added to + * the current run path used to find @rpath prefixed dylibs. + */ +struct rpath_command { + uint32_t cmd; /* LC_RPATH */ + uint32_t cmdsize; /* includes string */ + union lc_str path; /* path to add to run path */ +}; + +/* + * The linkedit_data_command contains the offsets and sizes of a blob + * of data in the __LINKEDIT segment. + */ +struct linkedit_data_command { + uint32_t cmd; /* LC_CODE_SIGNATURE, LC_SEGMENT_SPLIT_INFO, + LC_FUNCTION_STARTS, LC_DATA_IN_CODE, + or LC_DYLIB_CODE_SIGN_DRS */ + uint32_t cmdsize; /* sizeof(struct linkedit_data_command) */ + uint32_t dataoff; /* file offset of data in __LINKEDIT segment */ + uint32_t datasize; /* file size of data in __LINKEDIT segment */ +}; + +/* + * The encryption_info_command contains the file offset and size of an + * of an encrypted segment. + */ +struct encryption_info_command { + uint32_t cmd; /* LC_ENCRYPTION_INFO */ + uint32_t cmdsize; /* sizeof(struct encryption_info_command) */ + uint32_t cryptoff; /* file offset of encrypted range */ + uint32_t cryptsize; /* file size of encrypted range */ + uint32_t cryptid; /* which enryption system, + 0 means not-encrypted yet */ +}; + +/* + * The encryption_info_command_64 contains the file offset and size of an + * of an encrypted segment (for use in 64-bit targets). + */ +struct encryption_info_command_64 { + uint32_t cmd; /* LC_ENCRYPTION_INFO_64 */ + uint32_t cmdsize; /* sizeof(struct encryption_info_command_64) */ + uint32_t cryptoff; /* file offset of encrypted range */ + uint32_t cryptsize; /* file size of encrypted range */ + uint32_t cryptid; /* which enryption system, + 0 means not-encrypted yet */ + uint32_t pad; /* padding to make this struct's size a multiple + of 8 bytes */ +}; + +/* + * The version_min_command contains the min OS version on which this + * binary was built to run. + */ +struct version_min_command { + uint32_t cmd; /* LC_VERSION_MIN_MACOSX or + LC_VERSION_MIN_IPHONEOS */ + uint32_t cmdsize; /* sizeof(struct min_version_command) */ + uint32_t version; /* X.Y.Z is encoded in nibbles xxxx.yy.zz */ + uint32_t sdk; /* X.Y.Z is encoded in nibbles xxxx.yy.zz */ +}; + +/* + * The dyld_info_command contains the file offsets and sizes of + * the new compressed form of the information dyld needs to + * load the image. This information is used by dyld on Mac OS X + * 10.6 and later. All information pointed to by this command + * is encoded using byte streams, so no endian swapping is needed + * to interpret it. + */ +struct dyld_info_command { + uint32_t cmd; /* LC_DYLD_INFO or LC_DYLD_INFO_ONLY */ + uint32_t cmdsize; /* sizeof(struct dyld_info_command) */ + + /* + * Dyld rebases an image whenever dyld loads it at an address different + * from its preferred address. The rebase information is a stream + * of byte sized opcodes whose symbolic names start with REBASE_OPCODE_. + * Conceptually the rebase information is a table of tuples: + * + * The opcodes are a compressed way to encode the table by only + * encoding when a column changes. In addition simple patterns + * like "every n'th offset for m times" can be encoded in a few + * bytes. + */ + uint32_t rebase_off; /* file offset to rebase info */ + uint32_t rebase_size; /* size of rebase info */ + + /* + * Dyld binds an image during the loading process, if the image + * requires any pointers to be initialized to symbols in other images. + * The bind information is a stream of byte sized + * opcodes whose symbolic names start with BIND_OPCODE_. + * Conceptually the bind information is a table of tuples: + * + * The opcodes are a compressed way to encode the table by only + * encoding when a column changes. In addition simple patterns + * like for runs of pointers initialzed to the same value can be + * encoded in a few bytes. + */ + uint32_t bind_off; /* file offset to binding info */ + uint32_t bind_size; /* size of binding info */ + + /* + * Some C++ programs require dyld to unique symbols so that all + * images in the process use the same copy of some code/data. + * This step is done after binding. The content of the weak_bind + * info is an opcode stream like the bind_info. But it is sorted + * alphabetically by symbol name. This enable dyld to walk + * all images with weak binding information in order and look + * for collisions. If there are no collisions, dyld does + * no updating. That means that some fixups are also encoded + * in the bind_info. For instance, all calls to "operator new" + * are first bound to libstdc++.dylib using the information + * in bind_info. Then if some image overrides operator new + * that is detected when the weak_bind information is processed + * and the call to operator new is then rebound. + */ + uint32_t weak_bind_off; /* file offset to weak binding info */ + uint32_t weak_bind_size; /* size of weak binding info */ + + /* + * Some uses of external symbols do not need to be bound immediately. + * Instead they can be lazily bound on first use. The lazy_bind + * are contains a stream of BIND opcodes to bind all lazy symbols. + * Normal use is that dyld ignores the lazy_bind section when + * loading an image. Instead the static linker arranged for the + * lazy pointer to initially point to a helper function which + * pushes the offset into the lazy_bind area for the symbol + * needing to be bound, then jumps to dyld which simply adds + * the offset to lazy_bind_off to get the information on what + * to bind. + */ + uint32_t lazy_bind_off; /* file offset to lazy binding info */ + uint32_t lazy_bind_size; /* size of lazy binding infs */ + + /* + * The symbols exported by a dylib are encoded in a trie. This + * is a compact representation that factors out common prefixes. + * It also reduces LINKEDIT pages in RAM because it encodes all + * information (name, address, flags) in one small, contiguous range. + * The export area is a stream of nodes. The first node sequentially + * is the start node for the trie. + * + * Nodes for a symbol start with a uleb128 that is the length of + * the exported symbol information for the string so far. + * If there is no exported symbol, the node starts with a zero byte. + * If there is exported info, it follows the length. + * + * First is a uleb128 containing flags. Normally, it is followed by + * a uleb128 encoded offset which is location of the content named + * by the symbol from the mach_header for the image. If the flags + * is EXPORT_SYMBOL_FLAGS_REEXPORT, then following the flags is + * a uleb128 encoded library ordinal, then a zero terminated + * UTF8 string. If the string is zero length, then the symbol + * is re-export from the specified dylib with the same name. + * If the flags is EXPORT_SYMBOL_FLAGS_STUB_AND_RESOLVER, then following + * the flags is two uleb128s: the stub offset and the resolver offset. + * The stub is used by non-lazy pointers. The resolver is used + * by lazy pointers and must be called to get the actual address to use. + * + * After the optional exported symbol information is a byte of + * how many edges (0-255) that this node has leaving it, + * followed by each edge. + * Each edge is a zero terminated UTF8 of the addition chars + * in the symbol, followed by a uleb128 offset for the node that + * edge points to. + * + */ + uint32_t export_off; /* file offset to lazy binding info */ + uint32_t export_size; /* size of lazy binding infs */ +}; + +/* + * The following are used to encode rebasing information + */ +#define REBASE_TYPE_POINTER 1 +#define REBASE_TYPE_TEXT_ABSOLUTE32 2 +#define REBASE_TYPE_TEXT_PCREL32 3 + +#define REBASE_OPCODE_MASK 0xF0 +#define REBASE_IMMEDIATE_MASK 0x0F +#define REBASE_OPCODE_DONE 0x00 +#define REBASE_OPCODE_SET_TYPE_IMM 0x10 +#define REBASE_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB 0x20 +#define REBASE_OPCODE_ADD_ADDR_ULEB 0x30 +#define REBASE_OPCODE_ADD_ADDR_IMM_SCALED 0x40 +#define REBASE_OPCODE_DO_REBASE_IMM_TIMES 0x50 +#define REBASE_OPCODE_DO_REBASE_ULEB_TIMES 0x60 +#define REBASE_OPCODE_DO_REBASE_ADD_ADDR_ULEB 0x70 +#define REBASE_OPCODE_DO_REBASE_ULEB_TIMES_SKIPPING_ULEB 0x80 + + +/* + * The following are used to encode binding information + */ +#define BIND_TYPE_POINTER 1 +#define BIND_TYPE_TEXT_ABSOLUTE32 2 +#define BIND_TYPE_TEXT_PCREL32 3 + +#define BIND_SPECIAL_DYLIB_SELF 0 +#define BIND_SPECIAL_DYLIB_MAIN_EXECUTABLE -1 +#define BIND_SPECIAL_DYLIB_FLAT_LOOKUP -2 + +#define BIND_SYMBOL_FLAGS_WEAK_IMPORT 0x1 +#define BIND_SYMBOL_FLAGS_NON_WEAK_DEFINITION 0x8 + +#define BIND_OPCODE_MASK 0xF0 +#define BIND_IMMEDIATE_MASK 0x0F +#define BIND_OPCODE_DONE 0x00 +#define BIND_OPCODE_SET_DYLIB_ORDINAL_IMM 0x10 +#define BIND_OPCODE_SET_DYLIB_ORDINAL_ULEB 0x20 +#define BIND_OPCODE_SET_DYLIB_SPECIAL_IMM 0x30 +#define BIND_OPCODE_SET_SYMBOL_TRAILING_FLAGS_IMM 0x40 +#define BIND_OPCODE_SET_TYPE_IMM 0x50 +#define BIND_OPCODE_SET_ADDEND_SLEB 0x60 +#define BIND_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB 0x70 +#define BIND_OPCODE_ADD_ADDR_ULEB 0x80 +#define BIND_OPCODE_DO_BIND 0x90 +#define BIND_OPCODE_DO_BIND_ADD_ADDR_ULEB 0xA0 +#define BIND_OPCODE_DO_BIND_ADD_ADDR_IMM_SCALED 0xB0 +#define BIND_OPCODE_DO_BIND_ULEB_TIMES_SKIPPING_ULEB 0xC0 + + +/* + * The following are used on the flags byte of a terminal node + * in the export information. + */ +#define EXPORT_SYMBOL_FLAGS_KIND_MASK 0x03 +#define EXPORT_SYMBOL_FLAGS_KIND_REGULAR 0x00 +#define EXPORT_SYMBOL_FLAGS_KIND_THREAD_LOCAL 0x01 +#define EXPORT_SYMBOL_FLAGS_WEAK_DEFINITION 0x04 +#define EXPORT_SYMBOL_FLAGS_REEXPORT 0x08 +#define EXPORT_SYMBOL_FLAGS_STUB_AND_RESOLVER 0x10 + /* * The symseg_command contains the offset and size of the GNU style * symbol table information as described in the header file . * The symbol roots of the symbol segments must also be aligned properly * in the file. So the requirement of keeping the offsets aligned to a - * multiple of a sizeof(long) translates to the length field of the symbol + * multiple of a 4 bytes translates to the length field of the symbol * roots also being a multiple of a long. Also the padding must again be * zeroed. (THIS IS OBSOLETE and no longer supported). */ struct symseg_command { - unsigned long cmd; /* LC_SYMSEG */ - unsigned long cmdsize; /* sizeof(struct symseg_command) */ - unsigned long offset; /* symbol segment offset */ - unsigned long size; /* symbol segment size in bytes */ + uint32_t cmd; /* LC_SYMSEG */ + uint32_t cmdsize; /* sizeof(struct symseg_command) */ + uint32_t offset; /* symbol segment offset */ + uint32_t size; /* symbol segment size in bytes */ }; /* * The ident_command contains a free format string table following the * ident_command structure. The strings are null terminated and the size of - * the command is padded out with zero bytes to a multiple of sizeof(long). + * the command is padded out with zero bytes to a multiple of 4 bytes/ * (THIS IS OBSOLETE and no longer supported). */ struct ident_command { - unsigned long cmd; /* LC_IDENT */ - unsigned long cmdsize; /* strings that follow this command */ + uint32_t cmd; /* LC_IDENT */ + uint32_t cmdsize; /* strings that follow this command */ }; /* * The fvmfile_command contains a reference to a file to be loaded at the - * specified virtual address. (Presently, this command is reserved for NeXT + * specified virtual address. (Presently, this command is reserved for * internal use. The kernel ignores this command when loading a program into * memory). */ struct fvmfile_command { - unsigned long cmd; /* LC_FVMFILE */ - unsigned long cmdsize; /* includes pathname string */ + uint32_t cmd; /* LC_FVMFILE */ + uint32_t cmdsize; /* includes pathname string */ union lc_str name; /* files pathname */ - unsigned long header_addr; /* files virtual address */ + uint32_t header_addr; /* files virtual address */ +}; + + +/* + * The entry_point_command is a replacement for thread_command. + * It is used for main executables to specify the location (file offset) + * of main(). If -stack_size was used at link time, the stacksize + * field will contain the stack size need for the main thread. + */ +struct entry_point_command { + uint32_t cmd; /* LC_MAIN only used in MH_EXECUTE filetypes */ + uint32_t cmdsize; /* 24 */ + uint64_t entryoff; /* file (__TEXT) offset of main() */ + uint64_t stacksize;/* if not zero, initial stack size */ +}; + + +/* + * The source_version_command is an optional load command containing + * the version of the sources used to build the binary. + */ +struct source_version_command { + uint32_t cmd; /* LC_SOURCE_VERSION */ + uint32_t cmdsize; /* 16 */ + uint64_t version; /* A.B.C.D.E packed as a24.b10.c10.d10.e10 */ +}; + + +/* + * The LC_DATA_IN_CODE load commands uses a linkedit_data_command + * to point to an array of data_in_code_entry entries. Each entry + * describes a range of data in a code section. + */ +struct data_in_code_entry { + uint32_t offset; /* from mach_header to start of data range*/ + uint16_t length; /* number of bytes in data range */ + uint16_t kind; /* a DICE_KIND_* value */ +}; +#define DICE_KIND_DATA 0x0001 +#define DICE_KIND_JUMP_TABLE8 0x0002 +#define DICE_KIND_JUMP_TABLE16 0x0003 +#define DICE_KIND_JUMP_TABLE32 0x0004 +#define DICE_KIND_ABS_JUMP_TABLE32 0x0005 + + + +/* + * Sections of type S_THREAD_LOCAL_VARIABLES contain an array + * of tlv_descriptor structures. + */ +struct tlv_descriptor +{ + void* (*thunk)(struct tlv_descriptor*); + unsigned long key; + unsigned long offset; }; #endif /* _MACHO_LOADER_H_ */