X-Git-Url: https://git.saurik.com/apple/xnu.git/blobdiff_plain/6d2010ae8f7a6078e10b361c6962983bab233e0f..04b8595b18b1b41ac7a206e4b3d51a635f8413d7:/bsd/sys/protosw.h diff --git a/bsd/sys/protosw.h b/bsd/sys/protosw.h index 75b6d6b28..b7d319d18 100644 --- a/bsd/sys/protosw.h +++ b/bsd/sys/protosw.h @@ -1,8 +1,8 @@ /* - * Copyright (c) 2000-2011 Apple Inc. All rights reserved. + * Copyright (c) 2000-2014 Apple Inc. All rights reserved. * * @APPLE_OSREFERENCE_LICENSE_HEADER_START@ - * + * * This file contains Original Code and/or Modifications of Original Code * as defined in and that are subject to the Apple Public Source License * Version 2.0 (the 'License'). You may not use this file except in @@ -11,10 +11,10 @@ * unlawful or unlicensed copies of an Apple operating system, or to * circumvent, violate, or enable the circumvention or violation of, any * terms of an Apple operating system software license agreement. - * + * * Please obtain a copy of the License at * http://www.opensource.apple.com/apsl/ and read it before using this file. - * + * * The Original Code and all software distributed under the License are * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, @@ -22,7 +22,7 @@ * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. * Please see the License for the specific language governing rights and * limitations under the License. - * + * * @APPLE_OSREFERENCE_LICENSE_HEADER_END@ */ /* Copyright (c) 1998, 1999 Apple Computer, Inc. All Rights Reserved */ @@ -64,20 +64,19 @@ */ #ifndef _SYS_PROTOSW_H_ -#define _SYS_PROTOSW_H_ +#define _SYS_PROTOSW_H_ #include #include +/* XXX: this will go away */ #define PR_SLOWHZ 2 /* 2 slow timeouts per second */ -#ifndef __APPLE__ -/* - * See rdar://7617868: pr_fasttimo was removed use your own timer or pr_slowtimo instead - */ -#define PR_FASTHZ 5 /* 5 fast timeouts per second */ -#endif -#ifdef PRIVATE +#ifdef KERNEL_PRIVATE +#include +#include +#include +#include /* Forward declare these structures referenced from prototypes below. */ struct mbuf; @@ -86,8 +85,80 @@ struct sockaddr; struct socket; struct sockopt; struct socket_filter; +#ifdef XNU_KERNEL_PRIVATE +struct domain_old; +#endif /* XNU_KERNEL_PRIVATE */ + +#pragma pack(4) -/*#ifdef _KERNEL*/ +#ifdef XNU_KERNEL_PRIVATE +/* + * Legacy protocol switch table. + * + * NOTE: Do not modify this structure, as there are modules outside of xnu + * which rely on the size and layout for binary compatibility. This structure + * is simply used by the exported net_{add,del}_proto_old, pffindproto_old + * routines, and by the domain_old structure. Internally, protocol switch + * tables are stored in the private variant of protosw defined down below. + */ +struct protosw_old { +#else +struct protosw { +#endif /* !XNU_KERNEL_PRIVATE */ + short pr_type; /* socket type used for */ + struct domain *pr_domain; /* domain protocol a member of */ + short pr_protocol; /* protocol number */ + unsigned int pr_flags; /* see below */ + /* + * protocol-protocol hooks + */ + void (*pr_input) /* input to protocol (from below) */ + (struct mbuf *, int len); + int (*pr_output) /* output to protocol (from above) */ + (struct mbuf *m, struct socket *so); + void (*pr_ctlinput) /* control input (from below) */ + (int, struct sockaddr *, void *); + int (*pr_ctloutput) /* control output (from above) */ + (struct socket *, struct sockopt *); + /* + * user-protocol hook + */ + void *pr_ousrreq; + /* + * utility hooks + */ + void (*pr_init)(void); /* initialization hook */ + void (*pr_unused)(void); /* placeholder - fasttimo is removed */ + void (*pr_unused2)(void); /* placeholder - slowtimo is removed */ + void (*pr_drain)(void); /* flush any excess space possible */ + int (*pr_sysctl) /* sysctl for protocol */ + (int *, u_int, void *, size_t *, void *, size_t); +#ifdef XNU_KERNEL_PRIVATE + struct pr_usrreqs_old *pr_usrreqs; /* supersedes pr_usrreq() */ +#else + struct pr_usrreqs *pr_usrreqs; /* supersedes pr_usrreq() */ +#endif /* !XNU_KERNEL_PRIVATE */ + int (*pr_lock) /* lock function for protocol */ + (struct socket *so, int locktype, void *debug); + int (*pr_unlock) /* unlock for protocol */ + (struct socket *so, int locktype, void *debug); + lck_mtx_t *(*pr_getlock) /* retrieve protocol lock */ + (struct socket *so, int locktype); + /* + * Implant hooks + */ + TAILQ_HEAD(, socket_filter) pr_filter_head; +#ifdef XNU_KERNEL_PRIVATE + struct protosw_old *pr_next; /* chain for domain */ +#else + struct protosw *pr_next; /* chain for domain */ +#endif /* !XNU_KERNEL_PRIVATE */ + u_int32_t reserved[1]; /* padding for future use */ +}; + +#pragma pack() + +#ifdef XNU_KERNEL_PRIVATE /* * Protocol switch table. * @@ -95,10 +166,8 @@ struct socket_filter; * which is used for protocol-protocol and system-protocol communication. * * A protocol is called through the pr_init entry before any other. - * Thereafter it is called every 200ms through the pr_fasttimo entry and - * every 500ms through the pr_slowtimo for timer based actions. - * The system will call the pr_drain entry if it is low on space and - * this should throw away any non-critical data. + * The system will call the pr_drain entry if it is low on space and this + * should throw away any non-critical data. * * Protocols pass data between themselves as chains of mbufs using * the pr_input and pr_output hooks. Pr_input passes data up (towards @@ -109,68 +178,59 @@ struct socket_filter; * * The userreq routine interfaces protocols to the system and is * described below. + * + * After a protocol is attached, its pr_domain will be set to the domain + * which the protocol belongs to, and its pr_protosw will be set to the + * address of the protosw instance. The latter is useful for finding + * the real/original protosw instance, in the event so_proto is altered + * to point to an alternative/derivative protosw. E.g. the list of + * socket filters is only applicable on the original protosw instance. + * + * Internal, private and extendable representation of protosw. */ - -#include -#include -#include -#ifdef KERNEL -#include -#endif /* KERNEL */ - -#pragma pack(4) - struct protosw { - short pr_type; /* socket type used for */ + TAILQ_ENTRY(protosw) pr_entry; /* chain for domain */ struct domain *pr_domain; /* domain protocol a member of */ - short pr_protocol; /* protocol number */ - unsigned int pr_flags; /* see below */ -/* protocol-protocol hooks */ - void (*pr_input)(struct mbuf *, int len); - /* input to protocol (from below) */ - int (*pr_output)(struct mbuf *m, struct socket *so); - /* output to protocol (from above) */ - void (*pr_ctlinput)(int, struct sockaddr *, void *); - /* control input (from below) */ - int (*pr_ctloutput)(struct socket *, struct sockopt *); - /* control output (from above) */ -/* user-protocol hook */ - void *pr_ousrreq; -/* utility hooks */ - void (*pr_init)(void); /* initialization hook */ -#if __APPLE__ - void (*pr_unused)(void); /* placeholder - fasttimo is removed */ -#else - void (*pr_fasttimo)(void); - /* fast timeout (200ms) */ -#endif - void (*pr_slowtimo)(void); - /* slow timeout (500ms) */ - void (*pr_drain)(void); - /* flush any excess space possible */ -#if __APPLE__ - int (*pr_sysctl)(int *, u_int, void *, size_t *, void *, size_t); - /* sysctl for protocol */ -#endif - struct pr_usrreqs *pr_usrreqs; /* supersedes pr_usrreq() */ -#if __APPLE__ - int (*pr_lock) (struct socket *so, int locktype, void *debug); /* lock function for protocol */ - int (*pr_unlock) (struct socket *so, int locktype, void *debug); /* unlock for protocol */ -#ifdef _KERN_LOCKS_H_ - lck_mtx_t * (*pr_getlock) (struct socket *so, int locktype); -#else - void * (*pr_getlock) (struct socket *so, int locktype); -#endif -#endif -#if __APPLE__ -/* Implant hooks */ + struct protosw *pr_protosw; /* pointer to self */ + u_int16_t pr_type; /* socket type used for */ + u_int16_t pr_protocol; /* protocol number */ + u_int32_t pr_flags; /* see below */ + /* + * protocol-protocol hooks + */ + void (*pr_input) /* input to protocol (from below) */ + (struct mbuf *, int len); + int (*pr_output) /* output to protocol (from above) */ + (struct mbuf *m, struct socket *so); + void (*pr_ctlinput) /* control input (from below) */ + (int, struct sockaddr *, void *); + int (*pr_ctloutput) /* control output (from above) */ + (struct socket *, struct sockopt *); + /* + * user-protocol hook + */ + struct pr_usrreqs *pr_usrreqs; /* user request; see list below */ + /* + * utility hooks + */ + void (*pr_init) /* initialization hook */ + (struct protosw *, struct domain *); + void (*pr_drain)(void); /* flush any excess space possible */ + int (*pr_sysctl) /* sysctl for protocol */ + (int *, u_int, void *, size_t *, void *, size_t); + int (*pr_lock) /* lock function for protocol */ + (struct socket *so, int locktype, void *debug); + int (*pr_unlock) /* unlock for protocol */ + (struct socket *so, int locktype, void *debug); + lck_mtx_t *(*pr_getlock) /* retrieve protocol lock */ + (struct socket *so, int locktype); + /* + * misc + */ TAILQ_HEAD(, socket_filter) pr_filter_head; - struct protosw *pr_next; /* Chain for domain */ - u_int32_t reserved[1]; /* Padding for future use */ -#endif + struct protosw_old *pr_old; }; - -#pragma pack() +#endif /* XNU_KERNEL_PRIVATE */ /* * Values for pr_flags. @@ -181,30 +241,106 @@ struct protosw { * is only relevant if PR_CONNREQUIRED is set (otherwise sendto is allowed * anyhow). */ -#define PR_ATOMIC 0x01 /* exchange atomic messages only */ -#define PR_ADDR 0x02 /* addresses given with messages */ -#define PR_CONNREQUIRED 0x04 /* connection required by protocol */ -#define PR_WANTRCVD 0x08 /* want PRU_RCVD calls */ -#define PR_RIGHTS 0x10 /* passes capabilities */ -#define PR_IMPLOPCL 0x20 /* implied open/close */ -#define PR_LASTHDR 0x40 /* enforce ipsec policy; last header */ -#define PR_PROTOLOCK 0x80 /* protocol takes care of it's own locking */ -#define PR_PCBLOCK 0x100 /* protocol supports per pcb finer grain locking */ -#define PR_DISPOSE 0x200 /* protocol requires late lists disposal */ -#define PR_AGGDRAIN 0x400 /* protocol requires aggressive draining */ +#define PR_ATOMIC 0x01 /* exchange atomic messages only */ +#define PR_ADDR 0x02 /* addresses given with messages */ +#define PR_CONNREQUIRED 0x04 /* connection required by protocol */ +#define PR_WANTRCVD 0x08 /* want PRU_RCVD calls */ +#define PR_RIGHTS 0x10 /* passes capabilities */ +#define PR_IMPLOPCL 0x20 /* implied open/close */ +#define PR_LASTHDR 0x40 /* enforce ipsec policy; last header */ +#define PR_PROTOLOCK 0x80 /* protocol takes care of it's own locking */ +#define PR_PCBLOCK 0x100 /* protocol supports per pcb locking */ +#define PR_DISPOSE 0x200 /* protocol requires late lists disposal */ +#ifdef BSD_KERNEL_PRIVATE +#define PR_INITIALIZED 0x400 /* protocol has been initialized */ +#define PR_ATTACHED 0x800 /* protocol is attached to a domain */ +#define PR_MULTICONN 0x1000 /* supports multiple connect calls */ +#define PR_EVCONNINFO 0x2000 /* protocol generates conninfo event */ +#define PR_OLD 0x10000000 /* added via net_add_proto */ + +/* pseudo-public domain flags */ +#define PRF_USERFLAGS \ + (PR_ATOMIC|PR_ADDR|PR_CONNREQUIRED|PR_WANTRCVD|PR_RIGHTS| \ + PR_IMPLOPCL|PR_LASTHDR|PR_PROTOLOCK|PR_PCBLOCK|PR_DISPOSE) +#endif /* BSD_KERNEL_PRIVATE */ + +#ifdef BSD_KERNEL_PRIVATE +/* + * The arguments to the ctlinput routine are + * (*protosw[].pr_ctlinput)(cmd, sa, arg); + * where cmd is one of the commands below, sa is a pointer to a sockaddr, + * and arg is a `void *' argument used within a protocol family. + */ +#define PRC_IFDOWN 0 /* interface transition */ +#define PRC_ROUTEDEAD 1 /* select new route if possible ??? */ +#define PRC_IFUP 2 /* interface has come back up */ +#define PRC_QUENCH2 3 /* DEC congestion bit says slow down */ +#define PRC_QUENCH 4 /* some one said to slow down */ +#define PRC_MSGSIZE 5 /* message size forced drop */ +#define PRC_HOSTDEAD 6 /* host appears to be down */ +#define PRC_HOSTUNREACH 7 /* deprecated (use PRC_UNREACH_HOST) */ +#define PRC_UNREACH_NET 8 /* no route to network */ +#define PRC_UNREACH_HOST 9 /* no route to host */ +#define PRC_UNREACH_PROTOCOL 10 /* dst says bad protocol */ +#define PRC_UNREACH_PORT 11 /* bad port # */ +/* was PRC_UNREACH_NEEDFRAG 12 (use PRC_MSGSIZE) */ +#define PRC_UNREACH_SRCFAIL 13 /* source route failed */ +#define PRC_REDIRECT_NET 14 /* net routing redirect */ +#define PRC_REDIRECT_HOST 15 /* host routing redirect */ +#define PRC_REDIRECT_TOSNET 16 /* redirect for type of service & net */ +#define PRC_REDIRECT_TOSHOST 17 /* redirect for tos & host */ +#define PRC_TIMXCEED_INTRANS 18 /* packet lifetime expired in transit */ +#define PRC_TIMXCEED_REASS 19 /* lifetime expired on reass q */ +#define PRC_PARAMPROB 20 /* header incorrect */ +#define PRC_UNREACH_ADMIN_PROHIB 21 /* packet administrativly prohibited */ + +#define PRC_NCMDS 22 + +#define PRC_IS_REDIRECT(cmd) \ + ((cmd) >= PRC_REDIRECT_NET && (cmd) <= PRC_REDIRECT_TOSHOST) + +#ifdef PRCREQUESTS +char *prcrequests[] = { + "IFDOWN", "ROUTEDEAD", "IFUP", "DEC-BIT-QUENCH2", + "QUENCH", "MSGSIZE", "HOSTDEAD", "#7", + "NET-UNREACH", "HOST-UNREACH", "PROTO-UNREACH", "PORT-UNREACH", + "#12", "SRCFAIL-UNREACH", "NET-REDIRECT", "HOST-REDIRECT", + "TOSNET-REDIRECT", "TOSHOST-REDIRECT", "TX-INTRANS", "TX-REASS", + "PARAMPROB", "ADMIN-UNREACH" +}; +#endif /* PRCREQUESTS */ /* - * The arguments to usrreq are: - * (*protosw[].pr_usrreq)(up, req, m, nam, opt); - * where up is a (struct socket *), req is one of these requests, - * m is a optional mbuf chain containing a message, - * nam is an optional mbuf chain containing an address, - * and opt is a pointer to a socketopt structure or nil. - * The protocol is responsible for disposal of the mbuf chain m, - * the caller is responsible for any space held by nam and opt. + * The arguments to ctloutput are: + * (*protosw[].pr_ctloutput)(req, so, level, optname, optval, p); + * req is one of the actions listed below, so is a (struct socket *), + * level is an indication of which protocol layer the option is intended. + * optname is a protocol dependent socket option request, + * optval is a pointer to a mbuf-chain pointer, for value-return results. + * The protocol is responsible for disposal of the mbuf chain *optval + * if supplied, + * the caller is responsible for any space held by *optval, when returned. * A non-zero return from usrreq gives an * UNIX error number which should be passed to higher level software. */ +#define PRCO_GETOPT 0 +#define PRCO_SETOPT 1 + +#define PRCO_NCMDS 2 + +#ifdef PRCOREQUESTS +char *prcorequests[] = { + "GETOPT", "SETOPT", +}; +#endif /* PRCOREQUESTS */ + +/* + * In earlier BSD network stacks, a single pr_usrreq() function pointer was + * invoked with an operation number indicating what operation was desired. + * We now provide individual function pointers which protocols can implement, + * which offers a number of benefits (such as type checking for arguments). + * These older constants are still present in order to support TCP debugging. + */ #define PRU_ATTACH 0 /* attach protocol to up */ #define PRU_DETACH 1 /* detach protocol from up */ #define PRU_BIND 2 /* bind socket to address */ @@ -229,8 +365,8 @@ struct protosw { #define PRU_PROTORCV 20 /* receive from below */ #define PRU_PROTOSEND 21 /* send to below */ /* end for protocol's internal use */ -#define PRU_SEND_EOF 22 /* send and close */ -#define PRU_NREQ 22 +#define PRU_SEND_EOF 22 /* send and close */ +#define PRU_NREQ 22 #ifdef PRUREQUESTS char *prurequests[] = { @@ -239,211 +375,187 @@ char *prurequests[] = { "RCVD", "SEND", "ABORT", "CONTROL", "SENSE", "RCVOOB", "SENDOOB", "SOCKADDR", "PEERADDR", "CONNECT2", "FASTTIMO", "SLOWTIMO", - "PROTORCV", "PROTOSEND", - "SEND_EOF", + "PROTORCV", "PROTOSEND", "SEND_EOF", }; -#endif - -#ifdef KERNEL /* users shouldn't see this decl */ +#endif /* PRUREQUESTS */ +#endif /* BSD_KERNEL_PRIVATE */ struct ifnet; struct stat; struct ucred; struct uio; +#ifdef XNU_KERNEL_PRIVATE /* - * If the ordering here looks odd, that's because it's alphabetical. - * Having this structure separated out from the main protoswitch is allegedly - * a big (12 cycles per call) lose on high-end CPUs. We will eventually - * migrate this stuff back into the main structure. + * Legacy user-protocol hooks. + * + * NOTE: Do not modify this structure, as there are modules outside of xnu + * which rely on the size and layout for binary compatibility. This structure + * is simply used by the protosw_old structure. Internally, user-protocol + * hooks use the private variant of pr_usrreqs defined down below. */ +struct pr_usrreqs_old { +#else struct pr_usrreqs { +#endif /* !XNU_KERNEL_PRIVATE */ int (*pru_abort)(struct socket *so); int (*pru_accept)(struct socket *so, struct sockaddr **nam); int (*pru_attach)(struct socket *so, int proto, struct proc *p); int (*pru_bind)(struct socket *so, struct sockaddr *nam, - struct proc *p); + struct proc *p); int (*pru_connect)(struct socket *so, struct sockaddr *nam, - struct proc *p); + struct proc *p); int (*pru_connect2)(struct socket *so1, struct socket *so2); int (*pru_control)(struct socket *so, u_long cmd, caddr_t data, - struct ifnet *ifp, struct proc *p); + struct ifnet *ifp, struct proc *p); int (*pru_detach)(struct socket *so); int (*pru_disconnect)(struct socket *so); int (*pru_listen)(struct socket *so, struct proc *p); int (*pru_peeraddr)(struct socket *so, struct sockaddr **nam); int (*pru_rcvd)(struct socket *so, int flags); int (*pru_rcvoob)(struct socket *so, struct mbuf *m, int flags); - int (*pru_send)(struct socket *so, int flags, struct mbuf *m, - struct sockaddr *addr, struct mbuf *control, - struct proc *p); -#define PRUS_OOB 0x1 -#define PRUS_EOF 0x2 -#define PRUS_MORETOCOME 0x4 + int (*pru_send)(struct socket *so, int flags, struct mbuf *m, + struct sockaddr *addr, struct mbuf *control, + struct proc *p); int (*pru_sense)(struct socket *so, void *sb, int isstat64); int (*pru_shutdown)(struct socket *so); int (*pru_sockaddr)(struct socket *so, struct sockaddr **nam); - - /* - * These three added later, so they are out of order. They are used - * for shortcutting (fast path input/output) in some protocols. - * XXX - that's a lie, they are not implemented yet - * Rather than calling sosend() etc. directly, calls are made - * through these entry points. For protocols which still use - * the generic code, these just point to those routines. - */ int (*pru_sosend)(struct socket *so, struct sockaddr *addr, - struct uio *uio, struct mbuf *top, - struct mbuf *control, int flags); - int (*pru_soreceive)(struct socket *so, - struct sockaddr **paddr, - struct uio *uio, struct mbuf **mp0, - struct mbuf **controlp, int *flagsp); - int (*pru_sopoll)(struct socket *so, int events, - struct ucred *cred, void *); + struct uio *uio, struct mbuf *top, struct mbuf *control, + int flags); + int (*pru_soreceive)(struct socket *so, struct sockaddr **paddr, + struct uio *uio, struct mbuf **mp0, struct mbuf **controlp, + int *flagsp); + int (*pru_sopoll)(struct socket *so, int events, + struct ucred *cred, void *); }; -__BEGIN_DECLS - -extern int pru_abort_notsupp(struct socket *so); -extern int pru_accept_notsupp(struct socket *so, struct sockaddr **nam); -extern int pru_attach_notsupp(struct socket *so, int proto, - struct proc *p); -extern int pru_bind_notsupp(struct socket *so, struct sockaddr *nam, - struct proc *p); -extern int pru_connect_notsupp(struct socket *so, struct sockaddr *nam, - struct proc *p); -extern int pru_connect2_notsupp(struct socket *so1, struct socket *so2); -extern int pru_control_notsupp(struct socket *so, u_long cmd, caddr_t data, - struct ifnet *ifp, struct proc *p); -extern int pru_detach_notsupp(struct socket *so); -extern int pru_disconnect_notsupp(struct socket *so); -extern int pru_listen_notsupp(struct socket *so, struct proc *p); -extern int pru_peeraddr_notsupp(struct socket *so, - struct sockaddr **nam); -extern int pru_rcvd_notsupp(struct socket *so, int flags); -extern int pru_rcvoob_notsupp(struct socket *so, struct mbuf *m, - int flags); -extern int pru_send_notsupp(struct socket *so, int flags, struct mbuf *m, - struct sockaddr *addr, struct mbuf *control, - struct proc *p); -extern int pru_sense_null(struct socket *so, void * sb, int isstat64); -extern int pru_shutdown_notsupp(struct socket *so); -extern int pru_sockaddr_notsupp(struct socket *so, - struct sockaddr **nam); -extern int pru_sosend_notsupp(struct socket *so, struct sockaddr *addr, - struct uio *uio, struct mbuf *top, - struct mbuf *control, int flags); -extern int pru_soreceive_notsupp(struct socket *so, - struct sockaddr **paddr, - struct uio *uio, struct mbuf **mp0, - struct mbuf **controlp, int *flagsp); -extern int pru_sopoll_notsupp(struct socket *so, int events, - struct ucred *cred, void *); - -__END_DECLS - -#endif /* KERNEL */ - +#ifdef XNU_KERNEL_PRIVATE /* - * The arguments to the ctlinput routine are - * (*protosw[].pr_ctlinput)(cmd, sa, arg); - * where cmd is one of the commands below, sa is a pointer to a sockaddr, - * and arg is a `void *' argument used within a protocol family. + * If the ordering here looks odd, that's because it's alphabetical. These + * should eventually be merged back into struct protosw. + * + * Internal, private and extendable representation of pr_usrreqs. + * + * NOTE: When adding new ones, also add default callbacks in pru_sanitize(). */ -#define PRC_IFDOWN 0 /* interface transition */ -#define PRC_ROUTEDEAD 1 /* select new route if possible ??? */ -#define PRC_IFUP 2 /* interface has come back up */ -#define PRC_QUENCH2 3 /* DEC congestion bit says slow down */ -#define PRC_QUENCH 4 /* some one said to slow down */ -#define PRC_MSGSIZE 5 /* message size forced drop */ -#define PRC_HOSTDEAD 6 /* host appears to be down */ -#define PRC_HOSTUNREACH 7 /* deprecated (use PRC_UNREACH_HOST) */ -#define PRC_UNREACH_NET 8 /* no route to network */ -#define PRC_UNREACH_HOST 9 /* no route to host */ -#define PRC_UNREACH_PROTOCOL 10 /* dst says bad protocol */ -#define PRC_UNREACH_PORT 11 /* bad port # */ -/* was PRC_UNREACH_NEEDFRAG 12 (use PRC_MSGSIZE) */ -#define PRC_UNREACH_SRCFAIL 13 /* source route failed */ -#define PRC_REDIRECT_NET 14 /* net routing redirect */ -#define PRC_REDIRECT_HOST 15 /* host routing redirect */ -#define PRC_REDIRECT_TOSNET 16 /* redirect for type of service & net */ -#define PRC_REDIRECT_TOSHOST 17 /* redirect for tos & host */ -#define PRC_TIMXCEED_INTRANS 18 /* packet lifetime expired in transit */ -#define PRC_TIMXCEED_REASS 19 /* lifetime expired on reass q */ -#define PRC_PARAMPROB 20 /* header incorrect */ -#define PRC_UNREACH_ADMIN_PROHIB 21 /* packet administrativly prohibited */ - -#define PRC_NCMDS 22 - -#define PRC_IS_REDIRECT(cmd) \ - ((cmd) >= PRC_REDIRECT_NET && (cmd) <= PRC_REDIRECT_TOSHOST) - -#ifdef PRCREQUESTS -char *prcrequests[] = { - "IFDOWN", "ROUTEDEAD", "IFUP", "DEC-BIT-QUENCH2", - "QUENCH", "MSGSIZE", "HOSTDEAD", "#7", - "NET-UNREACH", "HOST-UNREACH", "PROTO-UNREACH", "PORT-UNREACH", - "#12", "SRCFAIL-UNREACH", "NET-REDIRECT", "HOST-REDIRECT", - "TOSNET-REDIRECT", "TOSHOST-REDIRECT", "TX-INTRANS", "TX-REASS", - "PARAMPROB", "ADMIN-UNREACH" +struct pr_usrreqs { + uint32_t pru_flags; /* see PRUF flags below */ + int (*pru_abort)(struct socket *); + int (*pru_accept)(struct socket *, struct sockaddr **); + int (*pru_attach)(struct socket *, int proto, struct proc *); + int (*pru_bind)(struct socket *, struct sockaddr *, struct proc *); + int (*pru_connect)(struct socket *, struct sockaddr *, + struct proc *); + int (*pru_connect2)(struct socket *, struct socket *); + int (*pru_connectx)(struct socket *, struct sockaddr_list **, + struct sockaddr_list **, struct proc *, uint32_t, + associd_t, connid_t *, uint32_t, void *, uint32_t); + int (*pru_control)(struct socket *, u_long, caddr_t, + struct ifnet *, struct proc *); + int (*pru_detach)(struct socket *); + int (*pru_disconnect)(struct socket *); + int (*pru_disconnectx)(struct socket *, associd_t, connid_t); + int (*pru_listen)(struct socket *, struct proc *); + int (*pru_peeloff)(struct socket *, associd_t, struct socket **); + int (*pru_peeraddr)(struct socket *, struct sockaddr **); + int (*pru_rcvd)(struct socket *, int); + int (*pru_rcvoob)(struct socket *, struct mbuf *, int); + int (*pru_send)(struct socket *, int, struct mbuf *, + struct sockaddr *, struct mbuf *, struct proc *); + int (*pru_send_list)(struct socket *, int, struct mbuf *, + struct sockaddr *, struct mbuf *, struct proc *); +#define PRUS_OOB 0x1 +#define PRUS_EOF 0x2 +#define PRUS_MORETOCOME 0x4 + int (*pru_sense)(struct socket *, void *, int); + int (*pru_shutdown)(struct socket *); + int (*pru_sockaddr)(struct socket *, struct sockaddr **); + int (*pru_sopoll)(struct socket *, int, struct ucred *, void *); + int (*pru_soreceive)(struct socket *, struct sockaddr **, + struct uio *, struct mbuf **, struct mbuf **, int *); + int (*pru_soreceive_list)(struct socket *, struct sockaddr **, + struct uio **, u_int, struct mbuf **, struct mbuf **, int *); + int (*pru_sosend)(struct socket *, struct sockaddr *, + struct uio *, struct mbuf *, struct mbuf *, int); + int (*pru_sosend_list)(struct socket *, struct sockaddr *, + struct uio **, u_int, struct mbuf *, struct mbuf *, int); + int (*pru_socheckopt)(struct socket *, struct sockopt *); }; -#endif -/* - * The arguments to ctloutput are: - * (*protosw[].pr_ctloutput)(req, so, level, optname, optval, p); - * req is one of the actions listed below, so is a (struct socket *), - * level is an indication of which protocol layer the option is intended. - * optname is a protocol dependent socket option request, - * optval is a pointer to a mbuf-chain pointer, for value-return results. - * The protocol is responsible for disposal of the mbuf chain *optval - * if supplied, - * the caller is responsible for any space held by *optval, when returned. - * A non-zero return from usrreq gives an - * UNIX error number which should be passed to higher level software. - */ -#define PRCO_GETOPT 0 -#define PRCO_SETOPT 1 +/* Values for pru_flags */ +#define PRUF_OLD 0x10000000 /* added via net_add_proto */ -#define PRCO_NCMDS 2 - -#ifdef PRCOREQUESTS -char *prcorequests[] = { - "GETOPT", "SETOPT", -}; -#endif - -#ifdef KERNEL +#endif /* XNU_KERNEL_PRIVATE */ __BEGIN_DECLS -void domaininit(void) __attribute__((section("__TEXT, initcode"))); -void domainfin(void) __attribute__((section("__TEXT, fincode"))); - -void pfctlinput(int, struct sockaddr *); -void pfctlinput2(int, struct sockaddr *, void *); -struct protosw *pffindproto(int family, int protocol, int type); -struct protosw *pffindproto_locked(int family, int protocol, int type); -struct protosw *pffindtype(int family, int type); - -extern int net_add_proto(struct protosw *, struct domain *); +extern int pru_abort_notsupp(struct socket *so); +extern int pru_accept_notsupp(struct socket *so, struct sockaddr **nam); +extern int pru_attach_notsupp(struct socket *so, int proto, struct proc *p); +extern int pru_bind_notsupp(struct socket *so, struct sockaddr *nam, + struct proc *p); +extern int pru_connect_notsupp(struct socket *so, struct sockaddr *nam, + struct proc *p); +extern int pru_connect2_notsupp(struct socket *so1, struct socket *so2); +#ifdef XNU_KERNEL_PRIVATE +extern int pru_connectx_notsupp(struct socket *, struct sockaddr_list **, + struct sockaddr_list **, struct proc *, uint32_t, associd_t, connid_t *, + uint32_t, void *, uint32_t); +extern int pru_disconnectx_notsupp(struct socket *, associd_t, connid_t); +extern int pru_socheckopt_null(struct socket *, struct sockopt *); +extern int pru_peeloff_notsupp(struct socket *, associd_t, struct socket **); +#endif /* XNU_KERNEL_PRIVATE */ +extern int pru_control_notsupp(struct socket *so, u_long cmd, caddr_t data, + struct ifnet *ifp, struct proc *p); +extern int pru_detach_notsupp(struct socket *so); +extern int pru_disconnect_notsupp(struct socket *so); +extern int pru_listen_notsupp(struct socket *so, struct proc *p); +extern int pru_peeraddr_notsupp(struct socket *so, struct sockaddr **nam); +extern int pru_rcvd_notsupp(struct socket *so, int flags); +extern int pru_rcvoob_notsupp(struct socket *so, struct mbuf *m, int flags); +extern int pru_send_notsupp(struct socket *so, int flags, struct mbuf *m, + struct sockaddr *addr, struct mbuf *control, struct proc *p); +extern int pru_send_list_notsupp(struct socket *so, int flags, struct mbuf *m, + struct sockaddr *addr, struct mbuf *control, struct proc *p); +extern int pru_sense_null(struct socket *so, void * sb, int isstat64); +extern int pru_shutdown_notsupp(struct socket *so); +extern int pru_sockaddr_notsupp(struct socket *so, struct sockaddr **nam); +extern int pru_sosend_notsupp(struct socket *so, struct sockaddr *addr, + struct uio *uio, struct mbuf *top, struct mbuf *control, int flags); +extern int pru_sosend_list_notsupp(struct socket *so, struct sockaddr *addr, + struct uio **uio, u_int, struct mbuf *top, struct mbuf *control, int flags); +extern int pru_soreceive_notsupp(struct socket *so, + struct sockaddr **paddr, struct uio *uio, struct mbuf **mp0, + struct mbuf **controlp, int *flagsp); +extern int pru_soreceive_list_notsupp(struct socket *so, + struct sockaddr **paddr, struct uio **uio, u_int, struct mbuf **mp0, + struct mbuf **controlp, int *flagsp); +extern int pru_sopoll_notsupp(struct socket *so, int events, + struct ucred *cred, void *); +#ifdef XNU_KERNEL_PRIVATE +extern void pru_sanitize(struct pr_usrreqs *); +extern void domaininit(void); +extern void domainfin(void); +extern void pfctlinput(int, struct sockaddr *); +extern void pfctlinput2(int, struct sockaddr *, void *); +extern struct protosw *pffindproto_locked(int, int, int); +extern struct protosw *pffindprotonotype(int, int); +extern struct protosw *pffindtype(int, int); +extern struct protosw_old *pffindproto_old(int, int, int); +extern int net_add_proto(struct protosw *, struct domain *, int); +extern void net_init_proto(struct protosw *, struct domain *); extern int net_del_proto(int, int, struct domain *); - +extern int net_add_proto_old(struct protosw_old *, struct domain_old *); +extern int net_del_proto_old(int, int, struct domain_old *); +extern void net_update_uptime(void); +extern void net_update_uptime_secs(uint64_t secs); extern u_int64_t net_uptime(void); +extern void net_uptime2timeval(struct timeval *); +#else +extern int net_add_proto(struct protosw *, struct domain *); +extern int net_del_proto(int, int, struct domain *); +#endif /* XNU_KERNEL_PRIVATE */ +extern struct protosw *pffindproto(int family, int protocol, int type); __END_DECLS - -/* Temp hack to link static domains together */ - -#define LINK_PROTOS(psw) \ -static void link_ ## psw ## _protos() \ -{ \ - int i; \ - \ - for (i=0; i < ((sizeof(psw)/sizeof(psw[0])) - 1); i++) \ - psw[i].pr_next = &psw[i + 1]; \ -} - -#endif - -#endif /* PRIVATE */ +#endif /* KERNEL_PRIVATE */ #endif /* !_SYS_PROTOSW_H_ */